ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --with-local-prefix=DIR specifies directory to put local include"
+ac_help="$ac_help
+ --with-gxx-include-dir=DIR
+ specifies directory to put g++ header files"
+ac_help="$ac_help
+ --with-cpp-install-dir=DIR
+ install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin"
+ac_help="$ac_help
--with-gnu-ld arrange to work with GNU ld."
ac_help="$ac_help
--with-ld arrange to use the specified ld (full pathname)"
ac_help="$ac_help
--with-as arrange to use the specified as (full pathname)"
ac_help="$ac_help
- --with-stabs arrange to use stabs instead of host debug format"
-ac_help="$ac_help
- --with-elf arrange to use ELF instead of host debug format"
-ac_help="$ac_help
- --with-local-prefix=DIR specifies directory to put local include"
-ac_help="$ac_help
- --with-gxx-include-dir=DIR
- specifies directory to put g++ header files"
-ac_help="$ac_help
- --enable-multilib enable library support for multiple ABIs"
-ac_help="$ac_help
--enable-werror enable -Werror in bootstrap stage2 and later"
ac_help="$ac_help
--enable-checking[=LIST]
optimization. Values are opt, noopt,
default is noopt"
ac_help="$ac_help
- --with-cpp-install-dir=DIR
- install the user visible C preprocessor in DIR
- (relative to PREFIX) as well as PREFIX/bin"
+ --with-stabs arrange to use stabs instead of host debug format"
+ac_help="$ac_help
+ --with-elf arrange to use ELF instead of host debug format"
+ac_help="$ac_help
+ --enable-multilib enable library support for multiple ABIs"
ac_help="$ac_help
--enable-__cxa_atexit enable __cxa_atexit for C++"
ac_help="$ac_help
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-copy=cp
-
-# Check for bogus environment variables.
-# Test if LIBRARY_PATH contains the notation for the current directory
-# since this would lead to problems installing/building glibc.
-# LIBRARY_PATH contains the current directory if one of the following
-# is true:
-# - one of the terminals (":" and ";") is the first or last sign
-# - two terminals occur directly after each other
-# - the path contains an element with a dot in it
-echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:635: checking LIBRARY_PATH variable" >&5
-case ${LIBRARY_PATH} in
- [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
- library_path_setting="contains current directory"
- ;;
- *)
- library_path_setting="ok"
- ;;
-esac
-echo "$ac_t""$library_path_setting" 1>&6
-if test "$library_path_setting" != "ok"; then
-{ echo "configure: error:
-*** LIBRARY_PATH shouldn't contain the current directory when
-*** building gcc. Please change the environment variable
-*** and run configure again." 1>&2; exit 1; }
-fi
-
-# Test if GCC_EXEC_PREFIX contains the notation for the current directory
-# since this would lead to problems installing/building glibc.
-# GCC_EXEC_PREFIX contains the current directory if one of the following
-# is true:
-# - one of the terminals (":" and ";") is the first or last sign
-# - two terminals occur directly after each other
-# - the path contains an element with a dot in it
-echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:660: checking GCC_EXEC_PREFIX variable" >&5
-case ${GCC_EXEC_PREFIX} in
- [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
- gcc_exec_prefix_setting="contains current directory"
- ;;
- *)
- gcc_exec_prefix_setting="ok"
- ;;
-esac
-echo "$ac_t""$gcc_exec_prefix_setting" 1>&6
-if test "$gcc_exec_prefix_setting" != "ok"; then
-{ echo "configure: error:
-*** GCC_EXEC_PREFIX shouldn't contain the current directory when
-*** building gcc. Please change the environment variable
-*** and run configure again." 1>&2; exit 1; }
-fi
-
-# Check for additional parameters
-
-# With GNU ld
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- gnu_ld_flag="$with_gnu_ld"
-else
- gnu_ld_flag=no
-fi
-
-
-# With pre-defined ld
-# Check whether --with-ld or --without-ld was given.
-if test "${with_ld+set}" = set; then
- withval="$with_ld"
- DEFAULT_LINKER="$with_ld"
-fi
-
-if test x"${DEFAULT_LINKER+set}" = x"set"; then
- if test ! -x "$DEFAULT_LINKER"; then
- echo "configure: warning: cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER" 1>&2
- elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
- gnu_ld_flag=yes
- fi
- cat >> confdefs.h <<EOF
-#define DEFAULT_LINKER "$DEFAULT_LINKER"
-EOF
-
-fi
-
-# With GNU as
-# Check whether --with-gnu-as or --without-gnu-as was given.
-if test "${with_gnu_as+set}" = set; then
- withval="$with_gnu_as"
- gas_flag="$with_gnu_as"
-else
- gas_flag=no
-fi
-
-
-# Check whether --with-as or --without-as was given.
-if test "${with_as+set}" = set; then
- withval="$with_as"
- DEFAULT_ASSEMBLER="$with_as"
-fi
-
-if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
- if test ! -x "$DEFAULT_ASSEMBLER"; then
- echo "configure: warning: cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER" 1>&2
- elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
- gas_flag=yes
- fi
- cat >> confdefs.h <<EOF
-#define DEFAULT_ASSEMBLER "$DEFAULT_ASSEMBLER"
-EOF
-
-fi
-
-# With stabs
-# Check whether --with-stabs or --without-stabs was given.
-if test "${with_stabs+set}" = set; then
- withval="$with_stabs"
- stabs="$with_stabs"
-else
- stabs=no
-fi
-
-
-# With ELF
-# Check whether --with-elf or --without-elf was given.
-if test "${with_elf+set}" = set; then
- withval="$with_elf"
- elf="$with_elf"
-else
- elf=no
-fi
-
-
-# Specify the local prefix
-local_prefix=
-# Check whether --with-local-prefix or --without-local-prefix was given.
-if test "${with_local_prefix+set}" = set; then
- withval="$with_local_prefix"
- case "${withval}" in
-yes) { echo "configure: error: bad value ${withval} given for local include directory prefix" 1>&2; exit 1; } ;;
-no) ;;
-*) local_prefix=$with_local_prefix ;;
-esac
-fi
-
-
-# Default local prefix if it is empty
-if test x$local_prefix = x; then
- local_prefix=/usr/local
-fi
-
-# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
-# passed in by the toplevel make and thus we'd get different behavior
-# depending on where we built the sources.
-gcc_gxx_include_dir=
-# Specify the g++ header file directory
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-if test "${with_gxx_include_dir+set}" = set; then
- withval="$with_gxx_include_dir"
- case "${withval}" in
-yes) { echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2; exit 1; } ;;
-no) ;;
-*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
-esac
-fi
-
-
-if test x${gcc_gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gcc_gxx_include_dir='${libsubdir}/include/c++'
- else
- topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
- fi
-fi
-
# Determine the host, build, and target systems
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:847: checking host system type" >&5
+echo "configure:669: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:868: checking target system type" >&5
+echo "configure:690: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:886: checking build system type" >&5
+echo "configure:708: checking build system type" >&5
build_alias=$build
case "$build_alias" in
program_prefix=${target_alias}-
+# Define variables host_canonical and build_canonical
+build_canonical=${build}
+host_canonical=${host}
+
+
+
+target_subdir=
+if test "${host}" != "${target}" ; then
+ target_subdir=${target_alias}/
+fi
+
+
# Set program_transform_name
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-# Find the native compiler
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:934: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
+# Check for bogus environment variables.
+# Test if LIBRARY_PATH contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# LIBRARY_PATH contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
+echo "configure:773: checking LIBRARY_PATH variable" >&5
+case ${LIBRARY_PATH} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ library_path_setting="contains current directory"
+ ;;
+ *)
+ library_path_setting="ok"
+ ;;
+esac
+echo "$ac_t""$library_path_setting" 1>&6
+if test "$library_path_setting" != "ok"; then
+{ echo "configure: error:
+*** LIBRARY_PATH shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again." 1>&2; exit 1; }
+fi
+
+# Test if GCC_EXEC_PREFIX contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# GCC_EXEC_PREFIX contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
+echo "configure:798: checking GCC_EXEC_PREFIX variable" >&5
+case ${GCC_EXEC_PREFIX} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ gcc_exec_prefix_setting="contains current directory"
+ ;;
+ *)
+ gcc_exec_prefix_setting="ok"
+ ;;
+esac
+echo "$ac_t""$gcc_exec_prefix_setting" 1>&6
+if test "$gcc_exec_prefix_setting" != "ok"; then
+{ echo "configure: error:
+*** GCC_EXEC_PREFIX shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again." 1>&2; exit 1; }
+fi
+
+# -----------
+# Directories
+# -----------
+
+# Specify the local prefix
+local_prefix=
+# Check whether --with-local-prefix or --without-local-prefix was given.
+if test "${with_local_prefix+set}" = set; then
+ withval="$with_local_prefix"
+ case "${withval}" in
+yes) { echo "configure: error: bad value ${withval} given for local include directory prefix" 1>&2; exit 1; } ;;
+no) ;;
+*) local_prefix=$with_local_prefix ;;
+esac
+fi
+
+
+# Default local prefix if it is empty
+if test x$local_prefix = x; then
+ local_prefix=/usr/local
+fi
+
+# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
+# passed in by the toplevel make and thus we'd get different behavior
+# depending on where we built the sources.
+gcc_gxx_include_dir=
+# Specify the g++ header file directory
+# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
+if test "${with_gxx_include_dir+set}" = set; then
+ withval="$with_gxx_include_dir"
+ case "${withval}" in
+yes) { echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2; exit 1; } ;;
+no) ;;
+*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
+esac
+fi
+
+
+if test x${gcc_gxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_include_dir='${libsubdir}/include/c++'
+ else
+ topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
+ gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
+ fi
+fi
+
+# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
+if test "${with_cpp_install_dir+set}" = set; then
+ withval="$with_cpp_install_dir"
+ if test x$withval = xyes; then
+ { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi
+fi
+
+
+# -------------------
+# Find default linker
+# -------------------
+
+# With GNU ld
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ gnu_ld_flag="$with_gnu_ld"
+else
+ gnu_ld_flag=no
+fi
+
+
+# With pre-defined ld
+# Check whether --with-ld or --without-ld was given.
+if test "${with_ld+set}" = set; then
+ withval="$with_ld"
+ DEFAULT_LINKER="$with_ld"
+fi
+
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_LINKER"; then
+ echo "configure: warning: cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER" 1>&2
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gnu_ld_flag=yes
+ fi
+ cat >> confdefs.h <<EOF
+#define DEFAULT_LINKER "$DEFAULT_LINKER"
+EOF
+
+fi
+
+echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
+echo "configure:907: checking whether a default linker was specified" >&5
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test x"$gnu_ld_flag" = x"no"; then
+ echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
+ else
+ echo "$ac_t""yes ($DEFAULT_LINKER - GNU ld)" 1>&6
+ fi
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# ----------------------
+# Find default assembler
+# ----------------------
+
+# With GNU as
+# Check whether --with-gnu-as or --without-gnu-as was given.
+if test "${with_gnu_as+set}" = set; then
+ withval="$with_gnu_as"
+ gas_flag="$with_gnu_as"
+else
+ gas_flag=no
+fi
+
+
+# Check whether --with-as or --without-as was given.
+if test "${with_as+set}" = set; then
+ withval="$with_as"
+ DEFAULT_ASSEMBLER="$with_as"
+fi
+
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_ASSEMBLER"; then
+ echo "configure: warning: cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER" 1>&2
+ elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gas_flag=yes
+ fi
+ cat >> confdefs.h <<EOF
+#define DEFAULT_ASSEMBLER "$DEFAULT_ASSEMBLER"
+EOF
+
+fi
+
+echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
+echo "configure:951: checking whether a default assembler was specified" >&5
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test x"$gas_flag" = x"no"; then
+ echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
+ else
+ echo "$ac_t""yes ($DEFAULT_ASSEMBLER - GNU as)" 1>&6
+ fi
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# ---------------
+# Find C compiler
+# ---------------
+
+# Find the native compiler
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:970: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:964: checking for $ac_word" >&5
+echo "configure:1000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1015: checking for $ac_word" >&5
+echo "configure:1051: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1047: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1083: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1058 "configure"
+#line 1094 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1089: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1125: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1094: checking whether we are using GNU C" >&5
+echo "configure:1130: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1122: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1158: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1155: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1191: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1158: checking whether cc understands -c and -o together" >&5
+echo "configure:1194: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1171: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1179: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
-# See if GNAT has been installed
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
-
+# -------------------------
+# Check C compiler features
+# -------------------------
-# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1225: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1255: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-Wno-long-long"
+cat > conftest.$ac_ext <<EOF
+#line 1262 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1269: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=yes
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=no
fi
-GNATBIND="$ac_cv_prog_GNATBIND"
-if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest*
+CFLAGS="$save_CFLAGS"
fi
+echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
-if test -z "$ac_cv_prog_GNATBIND"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "gnatbind", so it can be a program name with args.
-set dummy gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1257: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1285: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
-fi
-fi
-GNATBIND="$ac_cv_prog_GNATBIND"
-if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- GNATBIND="no"
-fi
-fi
-
-echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
-echo "configure:1290: checking for compiler driver that understands Ada" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat >conftest.adb <<EOF
-procedure conftest is begin null; end conftest;
-EOF
-gcc_cv_prog_adac=no
-# Have to do ac_tool_prefix and user overrides by hand.
-for cand in ${ADAC+"$ADAC"} ${CC+"$CC"} \
- ${ac_tool_prefix}gcc gcc \
- ${ac_tool_prefix}cc cc \
- ${ac_tool_prefix}gnatgcc gnatgcc \
- ${ac_tool_prefix}gnatcc gnatcc \
- ${ac_tool_prefix}adagcc adagcc \
- ${ac_tool_prefix}adacc adacc ; do
- # There is a bug in all released versions of GCC which causes the
- # driver to exit successfully when the appropriate language module
- # has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
- # Therefore we must check for the error message as well as an
- # unsuccessful exit.
- errors=`($cand -c conftest.adb) 2>&1 || echo failure`
- if test x"$errors" = x; then
- gcc_cv_prog_adac=$cand
- break
- fi
-done
-rm -f conftest.*
-fi
-
-echo "$ac_t""$gcc_cv_prog_adac" 1>&6
-ADAC=$gcc_cv_prog_adac
-
-
-if test x$GNATBIND != xno && test x$ADAC != xno; then
- have_gnat=yes
-else
- have_gnat=no
-fi
-
-
-echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1332: checking whether ${CC-cc} accepts -Wno-long-long" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- save_CFLAGS="$CFLAGS"
-CFLAGS="-Wno-long-long"
-cat > conftest.$ac_ext <<EOF
-#line 1339 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1346: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_prog_cc_no_long_long=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_prog_cc_no_long_long=no
-fi
-rm -f conftest*
-CFLAGS="$save_CFLAGS"
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
-
-if test x$have_gnat != xno ; then
-echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1363: checking whether ${ADAC} accepts -Wno-long-long" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat >conftest.adb <<EOF
-procedure conftest is begin null; end conftest;
-EOF
-if $ADAC -Wno-long-long -c conftest.adb 1>&5 2>&5 ; then
- ac_cv_prog_adac_no_long_long=yes
-else
- ac_cv_prog_adac_no_long_long=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_prog_adac_no_long_long" 1>&6
-else
- ac_cv_prog_adac_no_long_long=yes
-fi
-
-strict1_warn=
-if test $ac_cv_prog_cc_no_long_long = yes && \
- test $ac_cv_prog_adac_no_long_long = yes ; then
- strict1_warn="-pedantic -Wno-long-long"
-fi
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1391: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 1406 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1412: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1300 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1306: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1423 "configure"
+#line 1317 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1429: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1440 "configure"
+#line 1334 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1446: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1471: checking for inline" >&5
+echo "configure:1365: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1478 "configure"
+#line 1372 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1485: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1379: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1511: checking for volatile" >&5
+echo "configure:1405: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1516 "configure"
+#line 1410 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1545: checking for long double" >&5
+echo "configure:1439: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1553 "configure"
+#line 1447 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
fi
echo $ac_n "checking for long long int""... $ac_c" 1>&6
-echo "configure:1585: checking for long long int" >&5
+echo "configure:1479: checking for long long int" >&5
if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1590 "configure"
+#line 1484 "configure"
#include "confdefs.h"
int main() {
long long int i;
; return 0; }
EOF
-if { (eval echo configure:1597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_long_long=yes
else
fi
echo $ac_n "checking for __int64""... $ac_c" 1>&6
-echo "configure:1617: checking for __int64" >&5
+echo "configure:1511: checking for __int64" >&5
if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1622 "configure"
+#line 1516 "configure"
#include "confdefs.h"
int main() {
__int64 i;
; return 0; }
EOF
-if { (eval echo configure:1629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c___int64=yes
else
fi
echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
-echo "configure:1650: checking for built-in _Bool" >&5
+echo "configure:1544: checking for built-in _Bool" >&5
if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1655 "configure"
+#line 1549 "configure"
#include "confdefs.h"
int main() {
_Bool foo;
; return 0; }
EOF
-if { (eval echo configure:1662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c__bool=yes
else
# sizeof(char) is 1 by definition.
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1686: checking size of short" >&5
+echo "configure:1580: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1692 "configure"
+#line 1586 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (short) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1702: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_short=$ac_size
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1725: checking size of int" >&5
+echo "configure:1619: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1731 "configure"
+#line 1625 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (int) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1741: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1635: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_int=$ac_size
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1764: checking size of long" >&5
+echo "configure:1658: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1770 "configure"
+#line 1664 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (long) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1780: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1674: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_long=$ac_size
else
if test $ac_cv_c_long_long = yes; then
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1804: checking size of long long" >&5
+echo "configure:1698: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1810 "configure"
+#line 1704 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (long long) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1820: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_long_long=$ac_size
else
fi
if test $ac_cv_c___int64 = yes; then
echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:1845: checking size of __int64" >&5
+echo "configure:1739: checking size of __int64" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1851 "configure"
+#line 1745 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (__int64) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof___int64=$ac_size
else
fi
echo $ac_n "checking execution character set""... $ac_c" 1>&6
-echo "configure:1886: checking execution character set" >&5
+echo "configure:1780: checking execution character set" >&5
if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1891 "configure"
+#line 1785 "configure"
#include "confdefs.h"
#if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
&& 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
if test x${ac_cv_c_charset+set} != xset; then
cat > conftest.$ac_ext <<EOF
-#line 1907 "configure"
+#line 1801 "configure"
#include "confdefs.h"
#if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
&& 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
fi
-# If the native compiler is GCC, we can enable warnings even in stage1.
-# That's useful for people building cross-compilers, or just running a
-# quick `make'.
-warn_cflags=
-if test "x$GCC" = "xyes"; then
- warn_cflags='$(GCC_WARN_CFLAGS)'
-fi
-
+# -----------------
+# Find Ada compiler
+# -----------------
-# Determine whether or not multilibs are enabled.
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
- enableval="$enable_multilib"
- :
+# See if GNAT has been installed
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
else
- enable_multilib=yes
+ ac_tool_prefix=
fi
-
-# Enable -Werror in bootstrap stage2 and later.
-# Change the default to "no" on release branches.
-# Check whether --enable-werror or --disable-werror was given.
-if test "${enable_werror+set}" = set; then
- enableval="$enable_werror"
- :
+# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- enable_werror=yes
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-
-if test x$enable_werror = xyes ; then
- WERROR=-Werror
fi
-
-
-# Enable expensive internal checks
-# Check whether --enable-checking or --disable-checking was given.
-if test "${enable_checking+set}" = set; then
- enableval="$enable_checking"
- ac_checking=
-ac_tree_checking=
-ac_rtl_checking=
-ac_rtlflag_checking=
-ac_gc_checking=
-ac_gc_always_collect=
-case "${enableval}" in
-yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
- ac_rtlflag_checking=1 ;;
-no) ;;
-*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
- set fnord $enableval; shift
- IFS="$ac_save_IFS"
- for check
- do
- case $check in
- misc) ac_checking=1 ;;
- tree) ac_tree_checking=1 ;;
- rtlflag) ac_rtlflag_checking=1 ;;
- rtl) ac_rtl_checking=1 ;;
- gc) ac_gc_checking=1 ;;
- gcac) ac_gc_always_collect=1 ;;
- valgrind) ac_checking_valgrind=1 ;;
- *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
- esac
- done
- ;;
-esac
-
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
else
- # Enable some checks by default for development versions of GCC
-ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
-fi
-
-nocommon_flag=""
-if test x$ac_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_CHECKING 1
-EOF
-
- nocommon_flag=-fno-common
+ echo "$ac_t""no" 1>&6
fi
-if test x$ac_tree_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_TREE_CHECKING 1
-EOF
-
-fi
-if test x$ac_rtl_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_CHECKING 1
-EOF
+
+if test -z "$ac_cv_prog_GNATBIND"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1878: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
+fi
+fi
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ GNATBIND="no"
+fi
+fi
+
+echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
+echo "configure:1911: checking for compiler driver that understands Ada" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+gcc_cv_prog_adac=no
+# Have to do ac_tool_prefix and user overrides by hand.
+for cand in ${ADAC+"$ADAC"} ${CC+"$CC"} \
+ ${ac_tool_prefix}gcc gcc \
+ ${ac_tool_prefix}cc cc \
+ ${ac_tool_prefix}gnatgcc gnatgcc \
+ ${ac_tool_prefix}gnatcc gnatcc \
+ ${ac_tool_prefix}adagcc adagcc \
+ ${ac_tool_prefix}adacc adacc ; do
+ # There is a bug in all released versions of GCC which causes the
+ # driver to exit successfully when the appropriate language module
+ # has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+ # Therefore we must check for the error message as well as an
+ # unsuccessful exit.
+ errors=`($cand -c conftest.adb) 2>&1 || echo failure`
+ if test x"$errors" = x; then
+ gcc_cv_prog_adac=$cand
+ break
+ fi
+done
+rm -f conftest.*
+fi
+
+echo "$ac_t""$gcc_cv_prog_adac" 1>&6
+ADAC=$gcc_cv_prog_adac
+
+
+if test x$GNATBIND != xno && test x$ADAC != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
+
+
+if test x$have_gnat != xno ; then
+echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1954: checking whether ${ADAC} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+if $ADAC -Wno-long-long -c conftest.adb 1>&5 2>&5 ; then
+ ac_cv_prog_adac_no_long_long=yes
+else
+ ac_cv_prog_adac_no_long_long=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_prog_adac_no_long_long" 1>&6
+else
+ ac_cv_prog_adac_no_long_long=yes
+fi
+
+# ---------------------
+# Warnings and checking
+# ---------------------
+
+strict1_warn=
+if test $ac_cv_prog_cc_no_long_long = yes && \
+ test $ac_cv_prog_adac_no_long_long = yes ; then
+ strict1_warn="-pedantic -Wno-long-long"
+fi
+
+
+# If the native compiler is GCC, we can enable warnings even in stage1.
+# That's useful for people building cross-compilers, or just running a
+# quick `make'.
+warn_cflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+fi
+
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+# Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ :
+else
+ enable_werror=yes
+fi
+
+if test x$enable_werror = xyes ; then
+ WERROR=-Werror
+fi
+
+
+# Enable expensive internal checks
+# Check whether --enable-checking or --disable-checking was given.
+if test "${enable_checking+set}" = set; then
+ enableval="$enable_checking"
+ ac_checking=
+ac_tree_checking=
+ac_rtl_checking=
+ac_rtlflag_checking=
+ac_gc_checking=
+ac_gc_always_collect=
+case "${enableval}" in
+yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
+ ac_rtlflag_checking=1 ;;
+no) ;;
+*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+ set fnord $enableval; shift
+ IFS="$ac_save_IFS"
+ for check
+ do
+ case $check in
+ misc) ac_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ valgrind) ac_checking_valgrind=1 ;;
+ *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
+ esac
+ done
+ ;;
+esac
+
+else
+ # Enable some checks by default for development versions of GCC
+ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
+fi
+
+nocommon_flag=""
+if test x$ac_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_CHECKING 1
+EOF
+
+ nocommon_flag=-fno-common
+fi
+
+if test x$ac_tree_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_TREE_CHECKING 1
+EOF
+
+fi
+if test x$ac_rtl_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_CHECKING 1
+EOF
fi
if test x$ac_rtlflag_checking != x ; then
if test x$ac_checking_valgrind != x ; then
# It is certainly possible that there's valgrind but no valgrind.h.
# GCC relies on making annotations so we must have both.
+ echo $ac_n "checking for VALGRIND_DISCARD in <memcheck.h>""... $ac_c" 1>&6
+echo "configure:2092: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 2094 "configure"
+#include "confdefs.h"
+#include <memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ gcc_cv_header_memcheck_h=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_header_memcheck_h=no
+fi
+rm -f conftest*
+ echo "$ac_t""$gcc_cv_header_memcheck_h" 1>&6
ac_safe=`echo "valgrind.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for valgrind.h""... $ac_c" 1>&6
-echo "configure:2056: checking for valgrind.h" >&5
+echo "configure:2118: checking for valgrind.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2061 "configure"
+#line 2123 "configure"
#include "confdefs.h"
#include <valgrind.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2066: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "valgrind", so it can be a program name with args.
set dummy valgrind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2091: checking for $ac_word" >&5
+echo "configure:2153: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_valgrind_path'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- if test "x$valgrind_path" = "x" || test $have_valgrind_h = no; then
- { echo "configure: error: *** Can't find both valgrind and valgrind.h" 1>&2; exit 1; }
+ if test "x$valgrind_path" = "x" || (test $have_valgrind_h = no && test $gcc_cv_header_memcheck_h = no); then
+ { echo "configure: error: *** Can't find both valgrind and valgrind.h/memcheck.h" 1>&2; exit 1; }
fi
valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
valgrind_command="$valgrind_path -q"
#define ENABLE_VALGRIND_CHECKING 1
EOF
+ if test $gcc_cv_header_memcheck_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MEMCHECK_H 1
+EOF
+
+ fi
fi
-# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
-if test "${with_cpp_install_dir+set}" = set; then
- withval="$with_cpp_install_dir"
- if test x$withval = xyes; then
- { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
-elif test x$withval != xno; then
- cpp_install_dir=$withval
+# -------------------------------
+# Miscenalleous configure options
+# -------------------------------
+
+# With stabs
+# Check whether --with-stabs or --without-stabs was given.
+if test "${with_stabs+set}" = set; then
+ withval="$with_stabs"
+ stabs="$with_stabs"
+else
+ stabs=no
+fi
+
+
+# With ELF
+# Check whether --with-elf or --without-elf was given.
+if test "${with_elf+set}" = set; then
+ withval="$with_elf"
+ elf="$with_elf"
+else
+ elf=no
fi
+
+
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ :
+else
+ enable_multilib=yes
fi
+
# Enable __cxa_atexit for C++.
# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
if test "${enable___cxa_atexit+set}" = set; then
target_thread_file=''
;;
xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix)
+ xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix | xgnat)
target_thread_file=$enable_threads_flag
;;
*)
else
TARGET_SYSTEM_ROOT=
- TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=0'
+ TARGET_SYSTEM_ROOT_DEFINE=
CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
fi
-# Stage specific cflags for build.
-stage1_cflags=
-case $build in
-vax-*-*)
- if test x$GCC = xyes
- then
- stage1_cflags="-Wa,-J"
- else
- stage1_cflags="-J"
- fi
- ;;
-powerpc-*-darwin*)
- # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
- # sources; use -no-cpp-precomp to get to GNU cpp.
- # Apple's GCC has bugs in designated initializer handling, so disable
- # that too.
- stage1_cflags="-no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
- ;;
-esac
-
+# -------------------------
+# Checks for other programs
+# -------------------------
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2335: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2410: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
-echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:2363: checking whether a default assembler was specified" >&5
-if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
- if test x"$gas_flag" = x"no"; then
- echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
- else
- echo "$ac_t""yes ($DEFAULT_ASSEMBLER - GNU as)" 1>&6
- fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:2375: checking whether a default linker was specified" >&5
-if test x"${DEFAULT_LINKER+set}" = x"set"; then
- if test x"$gnu_ld_flag" = x"no"; then
- echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
- else
- echo "$ac_t""yes ($DEFAULT_LINKER - GNU ld)" 1>&6
- fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:2387: checking for GNU C library" >&5
-if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2392 "configure"
-#include "confdefs.h"
-#include <features.h>
-int main() {
-
-#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
-#error Not a GNU C library system
-#endif
-; return 0; }
-EOF
-if { (eval echo configure:2402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_glibc=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_glibc=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$gcc_cv_glibc" 1>&6
-if test $gcc_cv_glibc = yes; then
- cat >> confdefs.h <<\EOF
-#define _GNU_SOURCE 1
-EOF
-
-fi
-
# Find some useful tools
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2428: checking for $ac_word" >&5
+echo "configure:2443: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2458: checking whether ln works" >&5
+echo "configure:2473: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2490: checking whether ln -s works" >&5
+echo "configure:2505: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2524: checking for $ac_word" >&5
+echo "configure:2539: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2562: checking for a BSD compatible install" >&5
+echo "configure:2577: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2631: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_have_mktemp_command="yes"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
+fi
+fi
+have_mktemp_command="$ac_cv_prog_have_mktemp_command"
+if test -n "$have_mktemp_command"; then
+ echo "$ac_t""$have_mktemp_command" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Do we have a single-tree copy of texinfo?
+if test -f $srcdir/../texinfo/Makefile.in; then
+ MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
+ gcc_cv_prog_makeinfo_modern=yes
+ echo "$ac_t""Using makeinfo from the unified source tree." 1>&6
+else
+ # See if makeinfo has been installed and is modern enough
+ # that we can use it.
+ # Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2670: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -n "$MAKEINFO"; then
+ # Found it, now check the version.
+ echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
+echo "configure:2699: checking for modern makeinfo" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_prog_version=`$MAKEINFO --version 2>&1 |
+ sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
+ echo "configure:2705: version of makeinfo is $ac_prog_version" >&5
+ case $ac_prog_version in
+ '') gcc_cv_prog_makeinfo_modern=no;;
+ 4.[2-9]*)
+ gcc_cv_prog_makeinfo_modern=yes;;
+ *) gcc_cv_prog_makeinfo_modern=no;;
+ esac
+
+fi
+
+echo "$ac_t""$gcc_cv_prog_makeinfo_modern" 1>&6
+else
+ gcc_cv_prog_makeinfo_modern=no
+fi
+
+fi
+
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ echo "configure: warning:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." 1>&2
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+fi
+
+# Is pod2man recent enough to regenerate manpages?
+echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
+echo "configure:2733: checking for recent Pod::Man" >&5
+if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
+ echo "$ac_t""yes" 1>&6
+ GENERATED_MANPAGES=generated-manpages
+else
+ echo "$ac_t""no" 1>&6
+ GENERATED_MANPAGES=
+fi
+
+# 'make compare' can be significantly faster, if cmp itself can
+# skip bytes instead of using tail. The test being performed is
+# "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
+# but we need to sink errors and handle broken shells.
+echo $ac_n "checking for cmp's capabilities""... $ac_c" 1>&6
+echo "configure:2747: checking for cmp's capabilities" >&5
+echo abfoo >t1
+echo cdfoo >t2
+if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ make_compare_target=slowcompare
+ else
+ make_compare_target=gnucompare
+ fi
+else
+ make_compare_target=slowcompare
+fi
+rm t1 t2
+
+echo "$ac_t""$make_compare_target" 1>&6
+
+# How about lex?
+if test -f $srcdir/../flex/skel.c; then
+ FLEX='$(objdir)/../flex/flex'
+else
+ # Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2770: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FLEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_FLEX" && ac_cv_prog_FLEX="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing flex"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+ echo "$ac_t""$FLEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+# Bison?
+# The -L switch is so bison can find its skeleton file.
+if test -f $srcdir/../bison/bison.simple; then
+ BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/'
+else
+ # Extract the first word of "bison", so it can be a program name with args.
+set dummy bison; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2807: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_BISON="bison"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_BISON" && ac_cv_prog_BISON="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing bison"
+fi
+fi
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+ echo "$ac_t""$BISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+# --------------------
+# Checks for C headers
+# --------------------
+
+echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
+echo "configure:2841: checking for GNU C library" >&5
+if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2846 "configure"
+#include "confdefs.h"
+#include <features.h>
+int main() {
+
+#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
+#error Not a GNU C library system
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:2856: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_glibc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_glibc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_glibc" 1>&6
+if test $gcc_cv_glibc = yes; then
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
+EOF
+
+fi
+
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2613: checking for ANSI C header files" >&5
+echo "configure:2877: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2618 "configure"
+#line 2882 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2626: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2643 "configure"
+#line 2907 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2661 "configure"
+#line 2925 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2682 "configure"
+#line 2946 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2717: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2981: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2722 "configure"
+#line 2986 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2995: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for working stdbool.h""... $ac_c" 1>&6
-echo "configure:2752: checking for working stdbool.h" >&5
+echo "configure:3016: checking for working stdbool.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdbool_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2757 "configure"
+#line 3021 "configure"
#include "confdefs.h"
#include <stdbool.h>
int main() {
bool foo = false;
; return 0; }
EOF
-if { (eval echo configure:2764: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3028: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_stdbool_h=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2785: checking whether string.h and strings.h may both be included" >&5
+echo "configure:3049: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2790 "configure"
+#line 3054 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2798: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3062: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2819: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:3083: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2824 "configure"
+#line 3088 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2840: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3104: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
fcntl.h unistd.h sys/file.h sys/time.h \
sys/resource.h sys/param.h sys/times.h sys/stat.h \
- direct.h malloc.h langinfo.h ldfcn.h
+ direct.h malloc.h langinfo.h ldfcn.h wchar.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2867: checking for $ac_hdr" >&5
+echo "configure:3131: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2872 "configure"
+#line 3136 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2907: checking for thread.h" >&5
+echo "configure:3171: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2912 "configure"
+#line 3176 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2941: checking for pthread.h" >&5
+echo "configure:3205: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2946 "configure"
+#line 3210 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# These tests can't be done till we know if we have limits.h.
echo $ac_n "checking for CHAR_BIT""... $ac_c" 1>&6
-echo "configure:2976: checking for CHAR_BIT" >&5
+echo "configure:3240: checking for CHAR_BIT" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_char_bit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3245 "configure"
#include "confdefs.h"
#ifdef HAVE_LIMITS_H
#include <limits.h>
echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
if test $gcc_cv_decl_char_bit = no; then
echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
-echo "configure:3006: checking number of bits in a byte" >&5
+echo "configure:3270: checking number of bits in a byte" >&5
if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_nbby=
while test $i -lt 65; do
cat > conftest.$ac_ext <<EOF
-#line 3014 "configure"
+#line 3278 "configure"
#include "confdefs.h"
int main() {
; }
; return 0; }
EOF
-if { (eval echo configure:3024: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_nbby=$i; break
else
fi
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3049: checking whether byte ordering is bigendian" >&5
+echo "configure:3313: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3056 "configure"
+#line 3320 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3067: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3331: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3071 "configure"
+#line 3335 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
-; return 0; }
-EOF
-if { (eval echo configure:3082: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_bigendian=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_bigendian=no
-fi
-rm -f conftest*
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-if test $ac_cv_c_bigendian = unknown; then
-if test "$cross_compiling" = yes; then
- echo $ac_n "cross-compiling... " 2>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3102 "configure"
-#include "confdefs.h"
-main () {
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
-}
-EOF
-if { (eval echo configure:3115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_bigendian=no
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_bigendian=yes
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_c_bigendian" 1>&6
-if test $ac_cv_c_bigendian = unknown; then
-echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
-echo "configure:3133: checking to probe for byte ordering" >&5
-
-cat >conftest.c <<EOF
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
-int main() { _ascii (); _ebcdic (); return 0; }
-EOF
- if test -f conftest.c ; then
- if ${CC-cc} ${CFLAGS} conftest.c -o conftest.o && test -f conftest.o ; then
- if test `grep -l BIGenDianSyS conftest.o` ; then
- echo $ac_n ' big endian probe OK, ' 1>&6
- ac_cv_c_bigendian=yes
- fi
- if test `grep -l LiTTleEnDian conftest.o` ; then
- echo $ac_n ' little endian probe OK, ' 1>&6
- if test $ac_cv_c_bigendian = yes ; then
- ac_cv_c_bigendian=unknown;
- else
- ac_cv_c_bigendian=no
- fi
- fi
- echo $ac_n 'guessing bigendian ... ' >&6
- fi
- fi
-echo "$ac_t""$ac_cv_c_bigendian" 1>&6
-fi
-if test $ac_cv_c_bigendian = yes; then
- cat >> confdefs.h <<\EOF
-#define WORDS_BIGENDIAN 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HOST_WORDS_BIG_ENDIAN 1
-EOF
-
- BYTEORDER=4321
-else
- BYTEORDER=1234
-fi
-cat >> confdefs.h <<EOF
-#define BYTEORDER $BYTEORDER
-EOF
-
-if test $ac_cv_c_bigendian = unknown; then
- { echo "configure: error: unknown endianess - sorry" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking floating point format""... $ac_c" 1>&6
-echo "configure:3185: checking floating point format" >&5
-if eval "test \"`echo '$''{'ac_cv_c_float_format'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 3198 "configure"
-#include "confdefs.h"
-/* This will not work unless sizeof(double) == 8. */
-extern char sizeof_double_must_be_8 [sizeof(double) == 8 ? 1 : -1];
-
-/* This structure must have no internal padding. */
-struct possibility {
- char prefix[8];
- double candidate;
- char postfix[8];
-};
-
-#define C(cand) { "\nformat:", cand, ":tamrof\n" }
-struct possibility table [] =
-{
- C( 3.25724264705901305206e+01), /* @@IEEEFP - IEEE 754 */
- C( 3.53802595280598432000e+18), /* D__float - VAX */
- C( 5.32201830133125317057e-19), /* D.PDP-10 - PDP-10 - the dot is 0x13a */
- C( 1.77977764695171661377e+10), /* IBMHEXFP - s/390 format, ascii */
- C(-5.22995989424860458374e+10) /* IBMHEXFP - s/390 format, EBCDIC */
-};
-EOF
-if { (eval echo configure:3220: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- od -c conftest.o |
- sed 's/^[0-7]*[ ]*/ /
- s/\*/./g
- s/ \\n/*/g
- s/ [0-9][0-9][0-9]/./g
- s/ \\[^ ]/./g' |
- tr -d '
- ' | tr -s '*' '
-' | fold | sed '$a\
-' > conftest.dmp
- if grep 'format:.@IEEEF.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (big-endian)'
- elif grep 'format:.I@@PFE.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (big-endian)'
- elif grep 'format:.FEEEI@.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (little-endian)'
- elif grep 'format:.EFP@@I.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (little-endian)'
- elif grep 'format:.__floa.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='VAX D-float'
- elif grep 'format:..PDP-1.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='PDP-10'
- elif grep 'format:.BMHEXF.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IBM 370 hex'
- else
- { echo "configure: error: Unknown floating point format" 1>&2; exit 1; }
- fi
-else
- { echo "configure: error: compile failed" 1>&2; exit 1; }
-fi
-rm -rf conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-
-fi
-
-echo "$ac_t""$ac_cv_c_float_format" 1>&6
-# IEEE is the default format. If the float endianness isn't the same
-# as the integer endianness, we have to set FLOAT_WORDS_BIG_ENDIAN
-# (which is a tristate: yes, no, default). This is only an issue with
-# IEEE; the other formats are only supported by a few machines each,
-# all with the same endianness.
-format=
-fbigend=
-case $ac_cv_c_float_format in
- 'IEEE (big-endian)' )
- if test $ac_cv_c_bigendian = no; then
- fbigend=1
- fi
- ;;
- 'IEEE (little-endian)' )
- if test $ac_cv_c_bigendian = yes; then
- fbigend=0
- fi
- ;;
- 'VAX D-float' )
- format=VAX_FLOAT_FORMAT
- ;;
- 'PDP-10' )
- format=PDP10_FLOAT_FORMAT
- ;;
- 'IBM 370 hex' )
- format=IBM_FLOAT_FORMAT
- ;;
-esac
-if test -n "$format"; then
- cat >> confdefs.h <<EOF
-#define HOST_FLOAT_FORMAT $format
-EOF
-
-fi
-if test -n "$fbigend"; then
- cat >> confdefs.h <<EOF
-#define HOST_FLOAT_WORDS_BIG_ENDIAN $fbigend
-EOF
-
-fi
-
-
-# See if we have the mktemp command.
-# Extract the first word of "mktemp", so it can be a program name with args.
-set dummy mktemp; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3309: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$have_mktemp_command"; then
- ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_have_mktemp_command="yes"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
-fi
-fi
-have_mktemp_command="$ac_cv_prog_have_mktemp_command"
-if test -n "$have_mktemp_command"; then
- echo "$ac_t""$have_mktemp_command" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Do we have a single-tree copy of texinfo?
-if test -f $srcdir/../texinfo/Makefile.in; then
- MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
- gcc_cv_prog_makeinfo_modern=yes
- echo "$ac_t""Using makeinfo from the unified source tree." 1>&6
-else
- # See if makeinfo has been installed and is modern enough
- # that we can use it.
- # Extract the first word of "makeinfo", so it can be a program name with args.
-set dummy makeinfo; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3348: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$MAKEINFO"; then
- ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_MAKEINFO="makeinfo"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-MAKEINFO="$ac_cv_prog_MAKEINFO"
-if test -n "$MAKEINFO"; then
- echo "$ac_t""$MAKEINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -n "$MAKEINFO"; then
- # Found it, now check the version.
- echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:3377: checking for modern makeinfo" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_prog_version=`$MAKEINFO --version 2>&1 |
- sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:3383: version of makeinfo is $ac_prog_version" >&5
- case $ac_prog_version in
- '') gcc_cv_prog_makeinfo_modern=no;;
- 4.[2-9]*)
- gcc_cv_prog_makeinfo_modern=yes;;
- *) gcc_cv_prog_makeinfo_modern=no;;
- esac
-
-fi
-
-echo "$ac_t""$gcc_cv_prog_makeinfo_modern" 1>&6
-else
- gcc_cv_prog_makeinfo_modern=no
-fi
-
-fi
-
-if test $gcc_cv_prog_makeinfo_modern = no; then
- echo "configure: warning:
-*** Makeinfo is missing or too old.
-*** Info documentation will not be built." 1>&2
- BUILD_INFO=
-else
- BUILD_INFO=info
-fi
-
-# Is pod2man recent enough to regenerate manpages?
-echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:3411: checking for recent Pod::Man" >&5
-if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
- echo "$ac_t""yes" 1>&6
- GENERATED_MANPAGES=generated-manpages
+; return 0; }
+EOF
+if { (eval echo configure:3346: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_bigendian=yes
else
- echo "$ac_t""no" 1>&6
- GENERATED_MANPAGES=
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_bigendian=no
fi
-
-# How about lex?
-if test -f $srcdir/../flex/skel.c; then
- FLEX='$(objdir)/../flex/flex'
+rm -f conftest*
else
- # Extract the first word of "flex", so it can be a program name with args.
-set dummy flex; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3427: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+ echo $ac_n "cross-compiling... " 2>&6
else
- if test -n "$FLEX"; then
- ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+ cat > conftest.$ac_ext <<EOF
+#line 3366 "configure"
+#include "confdefs.h"
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:3379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_bigendian=no
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_FLEX="flex"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_FLEX" && ac_cv_prog_FLEX="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing flex"
-fi
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_bigendian=yes
fi
-FLEX="$ac_cv_prog_FLEX"
-if test -n "$FLEX"; then
- echo "$ac_t""$FLEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
+rm -fr conftest*
fi
fi
-
-# Bison?
-# The -L switch is so bison can find its skeleton file.
-if test -f $srcdir/../bison/bison.simple; then
- BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/'
-else
- # Extract the first word of "bison", so it can be a program name with args.
-set dummy bison; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3464: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$BISON"; then
- ac_cv_prog_BISON="$BISON" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_BISON="bison"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_BISON" && ac_cv_prog_BISON="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing bison"
fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = unknown; then
+echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
+echo "configure:3397: checking to probe for byte ordering" >&5
+
+cat >conftest.c <<EOF
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
+int main() { _ascii (); _ebcdic (); return 0; }
+EOF
+ if test -f conftest.c ; then
+ if ${CC-cc} ${CFLAGS} conftest.c -o conftest.o && test -f conftest.o ; then
+ if test `grep -l BIGenDianSyS conftest.o` ; then
+ echo $ac_n ' big endian probe OK, ' 1>&6
+ ac_cv_c_bigendian=yes
+ fi
+ if test `grep -l LiTTleEnDian conftest.o` ; then
+ echo $ac_n ' little endian probe OK, ' 1>&6
+ if test $ac_cv_c_bigendian = yes ; then
+ ac_cv_c_bigendian=unknown;
+ else
+ ac_cv_c_bigendian=no
+ fi
+ fi
+ echo $ac_n 'guessing bigendian ... ' >&6
+ fi
+ fi
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
fi
-BISON="$ac_cv_prog_BISON"
-if test -n "$BISON"; then
- echo "$ac_t""$BISON" 1>&6
+if test $ac_cv_c_bigendian = yes; then
+ cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HOST_WORDS_BIG_ENDIAN 1
+EOF
+
+ BYTEORDER=4321
else
- echo "$ac_t""no" 1>&6
+ BYTEORDER=1234
fi
+cat >> confdefs.h <<EOF
+#define BYTEORDER $BYTEORDER
+EOF
+if test $ac_cv_c_bigendian = unknown; then
+ { echo "configure: error: unknown endianess - sorry" 1>&2; exit 1; }
fi
+
+# --------
+# UNSORTED
+# --------
+
+# Stage specific cflags for build.
+stage1_cflags=
+case $build in
+vax-*-*)
+ if test x$GCC = xyes
+ then
+ stage1_cflags="-Wa,-J"
+ else
+ stage1_cflags="-J"
+ fi
+ ;;
+powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+
+
# These libraries may be used by collect2.
# We may need a special search path to get them linked.
echo $ac_n "checking for collect2 libraries""... $ac_c" 1>&6
-echo "configure:3496: checking for collect2 libraries" >&5
+echo "configure:3477: checking for collect2 libraries" >&5
if eval "test \"`echo '$''{'gcc_cv_collect2_libs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
LIBS="$libs"
cat > conftest.$ac_ext <<EOF
-#line 3507 "configure"
+#line 3488 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldopen()
; return 0; }
EOF
-if { (eval echo configure:3518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gcc_cv_collect2_libs="$libs"; break
else
LIBS=
echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
-echo "configure:3544: checking for library containing exc_resume" >&5
+echo "configure:3525: checking for library containing exc_resume" >&5
if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_exc_resume="no"
cat > conftest.$ac_ext <<EOF
-#line 3551 "configure"
+#line 3532 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
exc_resume()
; return 0; }
EOF
-if { (eval echo configure:3562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_exc_resume="none required"
else
test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3573 "configure"
+#line 3554 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
exc_resume()
; return 0; }
EOF
-if { (eval echo configure:3584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_exc_resume="-l$i"
break
LIBS="$save_LIBS"
+# Some systems put ldexp and frexp in libm instead of libc; assume
+# they're both in the same place. jcf-dump needs them.
+save_LIBS="$LIBS"
+LIBS=
+
+echo $ac_n "checking for library containing ldexp""... $ac_c" 1>&6
+echo "configure:3595: checking for library containing ldexp" >&5
+if eval "test \"`echo '$''{'ac_cv_search_ldexp'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_func_search_save_LIBS="$LIBS"
+ac_cv_search_ldexp="no"
+cat > conftest.$ac_ext <<EOF
+#line 3602 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char ldexp();
+
+int main() {
+ldexp()
+; return 0; }
+EOF
+if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_search_ldexp="none required"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+test "$ac_cv_search_ldexp" = "no" && for i in m; do
+LIBS="-l$i $ac_func_search_save_LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3624 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char ldexp();
+
+int main() {
+ldexp()
+; return 0; }
+EOF
+if { (eval echo configure:3635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_search_ldexp="-l$i"
+break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+LIBS="$ac_func_search_save_LIBS"
+fi
+
+echo "$ac_t""$ac_cv_search_ldexp" 1>&6
+if test "$ac_cv_search_ldexp" != "no"; then
+ test "$ac_cv_search_ldexp" = "none required" || LIBS="$ac_cv_search_ldexp $LIBS"
+
+else :
+
+fi
+LDEXP_LIB="$LIBS"
+LIBS="$save_LIBS"
+
+
# See if the stage1 system preprocessor understands the ANSI C
# preprocessor stringification operator. (Used by symcat.h.)
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:3613: checking for preprocessor stringizing operator" >&5
+echo "configure:3664: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3618 "configure"
+#line 3669 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:3651: checking for inttypes.h" >&5
+echo "configure:3702: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3656 "configure"
+#line 3707 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:3664: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
for ac_func in times clock dup2 kill getrlimit setrlimit atoll atoq \
sysconf strsignal putc_unlocked fputc_unlocked fputs_unlocked \
fwrite_unlocked fprintf_unlocked getrusage nl_langinfo lstat \
- scandir alphasort
+ scandir alphasort gettimeofday mbstowcs wcswidth
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3691: checking for $ac_func" >&5
+echo "configure:3742: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3696 "configure"
+#line 3747 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+if test x$ac_cv_func_mbstowcs = xyes; then
+ echo $ac_n "checking whether mbstowcs works""... $ac_c" 1>&6
+echo "configure:3797: checking whether mbstowcs works" >&5
+if eval "test \"`echo '$''{'gcc_cv_func_mbstowcs_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ gcc_cv_func_mbstowcs_works=yes
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3805 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+int main()
+{
+ mbstowcs(0, "", 0);
+ return 0;
+}
+EOF
+if { (eval echo configure:3814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ gcc_cv_func_mbstowcs_works=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ gcc_cv_func_mbstowcs_works=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$gcc_cv_func_mbstowcs_works" 1>&6
+ if test x$gcc_cv_func_mbstowcs_works = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_WORKING_MBSTOWCS 1
+EOF
+
+ fi
+fi
+
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3745: checking for ssize_t" >&5
+echo "configure:3838: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3750 "configure"
+#line 3843 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3781: checking for uid_t in sys/types.h" >&5
+echo "configure:3874: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3786 "configure"
+#line 3879 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:3815: checking type of array argument to getgroups" >&5
+echo "configure:3908: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 3823 "configure"
+#line 3916 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:3848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 3862 "configure"
+#line 3955 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:3903: checking whether the printf functions support %p" >&5
+echo "configure:3996: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 3911 "configure"
+#line 4004 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:3924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3962: checking for pid_t" >&5
+echo "configure:4055: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3967 "configure"
+#line 4060 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:3996: checking for vfork.h" >&5
+echo "configure:4089: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4001 "configure"
+#line 4094 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:4031: checking for working vfork" >&5
+echo "configure:4124: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:4037: checking for vfork" >&5
+echo "configure:4130: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4042 "configure"
+#line 4135 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:4065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 4087 "configure"
+#line 4180 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:4182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4207: checking for $ac_func" >&5
+echo "configure:4300: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4212 "configure"
+#line 4305 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:4506: checking for working mmap from /dev/zero" >&5
+echo "configure:4599: checking for working mmap from /dev/zero" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
else
cat > conftest.$ac_ext <<EOF
-#line 4521 "configure"
+#line 4614 "configure"
#include "confdefs.h"
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_dev_zero=yes
else
fi
echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:4552: checking for working mmap with MAP_ANON(YMOUS)" >&5
+echo "configure:4645: checking for working mmap with MAP_ANON(YMOUS)" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
else
cat > conftest.$ac_ext <<EOF
-#line 4565 "configure"
+#line 4658 "configure"
#include "confdefs.h"
#define USE_MAP_ANON
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anon=yes
else
rm -f ct-mmap.inc
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:4598: checking for working mmap of a file" >&5
+echo "configure:4691: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
else
cat > conftest.$ac_ext <<EOF
-#line 4616 "configure"
+#line 4709 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:4653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:4692: checking for iconv" >&5
+echo "configure:4785: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 4700 "configure"
+#line 4793 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 4722 "configure"
+#line 4815 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:4753: checking for iconv declaration" >&5
+echo "configure:4846: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4759 "configure"
+#line 4852 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:4778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4816: checking whether $ac_func is declared" >&5
+echo "configure:4909: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4821 "configure"
+#line 4914 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4928: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4937: checking whether $ac_func is declared" >&5
+echo "configure:5030: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4942 "configure"
+#line 5035 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
cat >> confdefs.h <<\EOF
#define HAVE_DECL_SETRLIMIT 1
EOF
- cat >> confdefs.h <<\EOF
-#define HAVE_DECL_GETRUSAGE 1
+ cat >> confdefs.h <<\EOF
+#define HAVE_DECL_GETRUSAGE 1
+EOF
+fi
+
+
+cat > conftest.$ac_ext <<EOF
+#line 5092 "configure"
+#include "confdefs.h"
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+
+int main() {
+rlim_t l = 0;
+; return 0; }
+EOF
+if { (eval echo configure:5105: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define rlim_t long
EOF
-fi
+fi
+rm -f conftest*
for ac_func in ldgetname
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:5002: checking whether $ac_func is declared" >&5
+echo "configure:5122: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5007 "configure"
+#line 5127 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:5025: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:5061: checking whether $ac_func is declared" >&5
+echo "configure:5181: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5066 "configure"
+#line 5186 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:5084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5204: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# More time-related stuff.
echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:5118: checking for struct tms" >&5
+echo "configure:5238: checking for struct tms" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5124 "configure"
+#line 5244 "configure"
#include "confdefs.h"
#include "ansidecl.h"
struct tms tms;
; return 0; }
EOF
-if { (eval echo configure:5137: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5257: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tms=yes
else
# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
# revisit after autoconf 2.50.
echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:5160: checking for clock_t" >&5
+echo "configure:5280: checking for clock_t" >&5
if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5166 "configure"
+#line 5286 "configure"
#include "confdefs.h"
#include "ansidecl.h"
clock_t x;
; return 0; }
EOF
-if { (eval echo configure:5176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5296: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_type_clock_t=yes
else
fi
echo $ac_n "checking for uchar""... $ac_c" 1>&6
-echo "configure:5197: checking for uchar" >&5
+echo "configure:5317: checking for uchar" >&5
if eval "test \"`echo '$''{'gcc_cv_type_uchar'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5202 "configure"
+#line 5322 "configure"
#include "confdefs.h"
#include "ansidecl.h"
if (sizeof(uchar)) return 0;
; return 0; }
EOF
-if { (eval echo configure:5213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5333: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_uchar=yes
else
else
echo $ac_n "checking for .preinit_array/.init_array/.fini_array support""... $ac_c" 1>&6
-echo "configure:5243: checking for .preinit_array/.init_array/.fini_array support" >&5
+echo "configure:5363: checking for .preinit_array/.init_array/.fini_array support" >&5
if eval "test \"`echo '$''{'gcc_cv_initfini_array'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_initfini_array=no
else
cat > conftest.$ac_ext <<EOF
-#line 5251 "configure"
+#line 5371 "configure"
#include "confdefs.h"
static int x = -1;
int foo (void) { x = 0; }
int (*fp) (void) __attribute__ ((section (".init_array"))) = foo;
EOF
-if { (eval echo configure:5259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_initfini_array=yes
else
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:5287: checking if mkdir takes one argument" >&5
+echo "configure:5407: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5292 "configure"
+#line 5412 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:5309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
echo $ac_n "checking for main in -lunwind""... $ac_c" 1>&6
-echo "configure:5349: checking for main in -lunwind" >&5
+echo "configure:5469: checking for main in -lunwind" >&5
ac_lib_var=`echo unwind'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lunwind $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5357 "configure"
+#line 5477 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
+# --------------------------------------------------------
+# Build, host, and target specific configuration fragments
+# --------------------------------------------------------
+
target_gtfiles=
build_xm_file=
build_xm_defines=
# put this back in temporarily.
xm_file="ansidecl.h ${xm_file}"
+# --------
+# UNSORTED
+# --------
+
# Truncate the target if necessary
if test x$host_truncate_target != x; then
target=`echo $target | sed -e 's/\(..............\).*/\1/'`
echo $ac_n "checking for library containing strerror""... $ac_c" 1>&6
-echo "configure:5653: checking for library containing strerror" >&5
+echo "configure:5781: checking for library containing strerror" >&5
if eval "test \"`echo '$''{'ac_cv_search_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_strerror="no"
cat > conftest.$ac_ext <<EOF
-#line 5660 "configure"
+#line 5788 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="none required"
else
test "$ac_cv_search_strerror" = "no" && for i in cposix; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5682 "configure"
+#line 5810 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="-l$i"
break
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5716: checking for working const" >&5
+echo "configure:5844: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5721 "configure"
+#line 5849 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:5770: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5898: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5791: checking for off_t" >&5
+echo "configure:5919: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5796 "configure"
+#line 5924 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5824: checking for size_t" >&5
+echo "configure:5952: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5829 "configure"
+#line 5957 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5859: checking for working alloca.h" >&5
+echo "configure:5987: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5864 "configure"
+#line 5992 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5892: checking for alloca" >&5
+echo "configure:6020: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5897 "configure"
+#line 6025 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5957: checking whether alloca needs Cray hooks" >&5
+echo "configure:6085: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5962 "configure"
+#line 6090 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5987: checking for $ac_func" >&5
+echo "configure:6115: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5992 "configure"
+#line 6120 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6042: checking stack direction for C alloca" >&5
+echo "configure:6170: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 6050 "configure"
+#line 6178 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:6069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:6092: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:6220: checking whether we are using the GNU C Library 2.1 or newer" >&5
if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6097 "configure"
+#line 6225 "configure"
#include "confdefs.h"
#include <features.h>
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6133: checking for $ac_hdr" >&5
+echo "configure:6261: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6138 "configure"
+#line 6266 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6271: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup strtoul tsearch __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6174: checking for $ac_func" >&5
+echo "configure:6302: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6179 "configure"
+#line 6307 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:6243: checking for iconv" >&5
+echo "configure:6371: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 6251 "configure"
+#line 6379 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:6261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 6273 "configure"
+#line 6401 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:6283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:6304: checking for iconv declaration" >&5
+echo "configure:6432: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6310 "configure"
+#line 6438 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:6329: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:6358: checking for nl_langinfo and CODESET" >&5
+echo "configure:6486: checking for nl_langinfo and CODESET" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6363 "configure"
+#line 6491 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(CODESET);
; return 0; }
EOF
-if { (eval echo configure:6370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_langinfo_codeset=yes
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6393: checking for LC_MESSAGES" >&5
+echo "configure:6521: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6398 "configure"
+#line 6526 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:6405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:6426: checking whether NLS is requested" >&5
+echo "configure:6554: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6449: checking whether included gettext is requested" >&5
+echo "configure:6577: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6469: checking for libintl.h" >&5
+echo "configure:6597: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6474 "configure"
+#line 6602 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6479: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6607: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EOF
echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:6500: checking for GNU gettext in libc" >&5
+echo "configure:6628: checking for GNU gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6505 "configure"
+#line 6633 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libc=yes
else
if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:6530: checking for GNU gettext in libintl" >&5
+echo "configure:6658: checking for GNU gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gt_save_LIBS="$LIBS"
LIBS="$LIBS -lintl $LIBICONV"
cat > conftest.$ac_ext <<EOF
-#line 6537 "configure"
+#line 6665 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libintl=yes
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6579: checking for $ac_func" >&5
+echo "configure:6707: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6584 "configure"
+#line 6712 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6636: checking for $ac_word" >&5
+echo "configure:6764: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6670: checking for $ac_word" >&5
+echo "configure:6798: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6707: checking for $ac_word" >&5
+echo "configure:6835: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6757: checking for $ac_word" >&5
+echo "configure:6885: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6791: checking for $ac_word" >&5
+echo "configure:6919: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6827: checking for $ac_word" >&5
+echo "configure:6955: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6899: checking for $ac_word" >&5
+echo "configure:7027: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_verc_fail=yes
else
echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:6932: checking version of bison" >&5
+echo "configure:7060: checking version of bison" >&5
ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
case $ac_prog_version in
'') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
if test "x$CATOBJEXT" != x; then
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6977: checking for catalogs to be installed" >&5
+echo "configure:7105: checking for catalogs to be installed" >&5
# Look for .po and .gmo files in the source directory.
CATALOGS=
XLINGUAS=
case $host_os in
win32 | pe | cygwin* | mingw32* | uwin*)
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:7035: checking whether windows registry support is requested" >&5
+echo "configure:7163: checking whether windows registry support is requested" >&5
if test "x$enable_win32_registry" != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:7044: checking for library containing RegOpenKeyExA" >&5
+echo "configure:7172: checking for library containing RegOpenKeyExA" >&5
if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_RegOpenKeyExA="no"
cat > conftest.$ac_ext <<EOF
-#line 7051 "configure"
+#line 7179 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:7062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="none required"
else
test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7073 "configure"
+#line 7201 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:7084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="-l$i"
break
if test "x$enable_win32_registry" != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:7126: checking registry key on windows hosts" >&5
+echo "configure:7254: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
fi
done
+symbolic_link='ln -s'
+
# If the host doesn't support symlinks, modify CC in
# FLAGS_TO_PASS so CC="stage1/xgcc -Bstage1/" works.
# Otherwise, we can use "CC=$(CC)".
| powerpc*-*-*,powerpc64*-*-*)
CROSS="$CROSS -DNATIVE_CROSS" ;;
esac
+elif test "x$TARGET_SYSTEM_ROOT" != x; then
+ # This is just $(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR)
+ SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
fi
# If this is a cross-compiler that does not
BUILD_CC='$(CC_FOR_BUILD)'
BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS_FOR_BUILD) $(XCFLAGS)'
- STMP_FIXINC=
- STMP_FIXPROTO=
+ if test "x$TARGET_SYSTEM_ROOT" = x; then
+ STMP_FIXINC=
+ STMP_FIXPROTO=
+ fi
fi
# Expand extra_headers to include complete path.
done
fi
-if test x$use_collect2 = xno; then
- use_collect2=
-fi
-
# Add a definition of USE_COLLECT2 if system wants one.
-if test x$use_collect2 != x
-then
- host_xm_defines="${host_xm_defines} USE_COLLECT2"
- xm_defines="${xm_defines} USE_COLLECT2"
-fi
-
-# If we have gas in the build tree, make a link to it.
-if test -f ../gas/Makefile; then
- rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
-fi
-
-# If we have nm and objdump in the build tree, make a link to them.
-if test -f ../binutils/Makefile; then
- rm -f nm; $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
- rm -f objdump; $symbolic_link ../binutils/objdump$host_exeext objdump$host_exeext 2>/dev/null
-fi
-
-# If we have ld in the build tree, make a link to it.
-if test -f ../ld/Makefile; then
- rm -f collect-ld; $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null
-fi
+case $use_collect2 in
+ no) use_collect2= ;;
+ "") ;;
+ *)
+ host_xm_defines="${host_xm_defines} USE_COLLECT2"
+ xm_defines="${xm_defines} USE_COLLECT2"
+ ;;
+esac
-# Figure out what assembler we will be using.
+# Identify the assembler which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the assembler
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target assembler and hope that it will have the same features
+# as the host->target assembler we'll be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:7339: checking what assembler to use" >&5
+echo "configure:7463: checking what assembler to use" >&5
+in_tree_gas=no
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
-gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
elif test -x "$AS"; then
elif test -x as$host_exeext; then
# Build using assembler in the current directory.
gcc_cv_as=./as$host_exeext
-elif test -f $gcc_cv_as_gas_srcdir/configure.in -a -f ../gas/Makefile; then
- # Single tree build which includes gas.
- for f in $gcc_cv_as_bfd_srcdir/configure $gcc_cv_as_gas_srcdir/configure $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in
- do
- gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
- if test x$gcc_cv_gas_version != x; then
- break
- fi
- done
- gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
- gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+elif test -f $gcc_cv_as_gas_srcdir/configure.in \
+ && test -f ../gas/Makefile; then
+ # Single tree build which includes gas.
+ in_tree_gas=yes
+ gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+for f in $gcc_cv_as_bfd_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure.in \
+ $gcc_cv_as_gas_srcdir/Makefile.in ; do
+ gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
+ if test x$gcc_cv_gas_version != x; then
+ break
+ fi
+done
+gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
+gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+
+ rm -f as$host_exeext
+ $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
fi
if test "x$gcc_cv_as" = x; then
fi
done
fi
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- echo "$ac_t"""newly built gas"" 1>&6
-else
- echo "$ac_t""$gcc_cv_as" 1>&6
-fi
+case $in_tree_gas in
+ yes)
+ echo "$ac_t"""newly built gas"" 1>&6
+ ;;
+ no)
+ echo "$ac_t""$gcc_cv_as" 1>&6
+ ;;
+esac
-# Figure out what linker we will be using.
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:7433: checking what linker to use" >&5
+echo "configure:7574: checking what linker to use" >&5
+in_tree_ld=no
gcc_cv_ld=
gcc_cv_gld_major_version=
gcc_cv_gld_minor_version=
gcc_cv_ld="$DEFAULT_LINKER"
elif test -x "$LD"; then
gcc_cv_ld="$LD"
-elif test -x ld$host_exeext; then
+elif test -x collect-ld$host_exeext; then
# Build using linker in the current directory.
- gcc_cv_ld=./ld$host_exeext
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in -a -f ../ld/Makefile; then
+ gcc_cv_ld=./collect-ld$host_exeext
+elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+ && test -f ../ld/Makefile; then
# Single tree build which includes ld.
+ in_tree_ld=yes
for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
do
gcc_cv_gld_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
done
gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+ rm -f collect-ld$host_exeext
+ $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext \
+ 2>/dev/null
fi
if test "x$gcc_cv_ld" = x; then
fi
done
fi
-if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
- echo "$ac_t"""newly built ld"" 1>&6
-else
- echo "$ac_t""$gcc_cv_ld" 1>&6
-fi
+case $in_tree_ld in
+ yes)
+ echo "$ac_t"""newly built ld"" 1>&6
+ ;;
+ no)
+ echo "$ac_t""$gcc_cv_ld" 1>&6
+ ;;
+esac
# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7526: checking what nm to use" >&5
+echo "configure:7677: checking what nm to use" >&5
+in_tree_nm=no
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
+elif test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ # Single tree build which includes binutils.
+ in_tree_nm=yes
+ gcc_cv_nm=./nm$host_exeext
+ rm -f nm$host_exeext
+ $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
elif test "x$program_prefix" != xNONE; then
gcc_cv_nm=${program_prefix}nm$host_exeext
else
gcc_cv_nm=`echo nm | sed ${program_transform_name}`$host_exeext
fi
-echo "$ac_t""$gcc_cv_nm" 1>&6
+case $in_tree_nm in
+ yes) echo "$ac_t"""newly built nm"" 1>&6 ;;
+ no) echo "$ac_t""$gcc_cv_nm" 1>&6 ;;
+esac
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7538: checking what objdump to use" >&5
+echo "configure:7700: checking what objdump to use" >&5
+in_tree_objdump=no
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
+elif test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ # Single tree build which includes binutils.
+ in_tree_objdump=yes
+ gcc_cv_objdump=./objdump$host_exeext
+ rm -f objdump$host_exeext
+ $symbolic_link ../binutils/objdump$host_exeext \
+ objdump$host_exeext 2>/dev/null
elif test "x$program_prefix" != xNONE; then
gcc_cv_objdump=${program_prefix}objdump$host_exeext
else
- gcc_cv_objdump=`echo objdump | sed ${program_transform_name}`$host_exeext
+ gcc_cv_objdump=`echo objdump | \
+ sed ${program_transform_name}`$host_exeext
fi
-echo "$ac_t""$gcc_cv_objdump" 1>&6
+case $in_tree_objdump in
+ yes) echo "$ac_t"""newly built objdump"" 1>&6 ;;
+ no) echo "$ac_t""$gcc_cv_objdump" 1>&6 ;;
+esac
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7550: checking assembler alignment features" >&5
+echo "configure:7725: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- # Gas version 2.6 and later support for .balign and .p2align.
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
+if test $in_tree_gas = yes; then
+ # Gas version 2.6 and later support for .balign and .p2align.
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 6 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_alignment_features=".balign and .p2align"
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
EOF
- fi
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
+
+
+fi
+
+ # Gas version 2.8 and later support specifying the maximum
+ # bytes to skip when using .p2align.
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 8 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_alignment_features=".p2align including maximum skip"
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
EOF
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7598: checking assembler subsection support" >&5
+echo "configure:7786: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_subsections="working .subsection -1"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 9 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_subsections="working .subsection -1"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .subsection
echo ".subsection 1" > conftest.s
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7638: checking assembler weak support" >&5
+echo "configure:7835: checking assembler weak support" >&5
gcc_cv_as_weak=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 2 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_weak="yes"
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .weak
echo " .weak foobar" > conftest.s
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7661: checking assembler hidden support" >&5
+echo "configure:7865: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -eq 12 \
- -a "$gcc_cv_gas_patch_version" -ge 1 \
- -o "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -gt 12 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_hidden="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& (test $gcc_cv_gas_minor_version -gt 12 \
+ || (test $gcc_cv_gas_minor_version -eq 12 \
+ && test $gcc_cv_gas_patch_version -ge 1 )) \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_hidden="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .hidden
echo " .hidden foobar" > conftest.s
# the date string after the version number.
ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
if echo "$ld_ver" | grep GNU > /dev/null; then
- ld_vers=`echo $ld_ver | sed -n 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\(\|\.[0-9][0-9]*\)\)\([ ].*\|\)$,\1,p'`
- ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
+ ld_vers=`echo $ld_ver | sed -n 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\(\|\.[0-9][0-9]*\(\|\.[0-9][0-9]*\)\)\)\([ ].*\|\)$,\1,p'`
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
if test 0"$ld_date" -lt 20020404; then
if test -n "$ld_date"; then
# If there was date string, but was earlier than 2002-04-04, fail
echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7737: checking assembler leb128 support" >&5
+echo "configure:7946: checking assembler leb128 support" >&5
gcc_cv_as_leb128=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 11 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_leb128="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_leb128="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .[us]leb128, and support symbol arithmetic with it.
cat > conftest.s <<EOF
echo "$ac_t""$gcc_cv_as_leb128" 1>&6
echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7782: checking assembler eh_frame optimization" >&5
+echo "configure:8000: checking assembler eh_frame optimization" >&5
gcc_cv_as_eh_frame=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_eh_frame="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_eh_frame="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if this is GAS.
as_ver=`$gcc_cv_as --version < /dev/null 2> /dev/null | head -1`
echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7863: checking assembler section merging support" >&5
+echo "configure:8090: checking assembler section merging support" >&5
gcc_cv_as_shf_merge=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_shf_merge=yes
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_shf_merge=yes
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we support SHF_MERGE sections
echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7886: checking assembler thread-local storage support" >&5
+echo "configure:8122: checking assembler thread-local storage support" >&5
gcc_cv_as_tls=no
conftest_s=
tls_first_major=
tls_first_major=2
tls_first_minor=13
;;
+ powerpc-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 2
+ld0: .space 4
+ld1: .space 4
+x1: .space 4
+x2: .space 4
+x3: .space 4
+ .text
+ addi 3,31,ld0@got@tlsgd
+ bl __tls_get_addr
+ addi 3,31,x1@got@tlsld
+ bl __tls_get_addr
+ addi 9,3,x1@dtprel
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ lwz 9,x3@got@tprel(31)
+ add 9,9,x@tls
+ addi 9,2,x1@tprel
+ addis 9,2,x2@tprel@ha
+ addi 9,9,x2@tprel@l'
+ tls_first_major=2
+ tls_first_minor=14
+ ;;
+ powerpc64-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 3
+ld0: .space 8
+ld1: .space 8
+x1: .space 8
+x2: .space 8
+x3: .space 8
+ .text
+ addi 3,2,ld0@got@tlsgd
+ bl .__tls_get_addr
+ nop
+ addi 3,2,ld1@toc
+ bl .__tls_get_addr
+ nop
+ addi 3,2,x1@got@tlsld
+ bl .__tls_get_addr
+ nop
+ addi 9,3,x1@dtprel
+ bl .__tls_get_addr
+ nop
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ bl .__tls_get_addr
+ nop
+ ld 9,x3@got@dtprel(2)
+ add 9,9,3
+ bl .__tls_get_addr
+ nop'
+ tls_first_major=2
+ tls_first_minor=14
+ ;;
s390-*-*)
conftest_s='
.section ".tdata","awT",@progbits
esac
if test -z "$tls_first_major"; then
:
-elif test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
-then
- if test "$gcc_cv_gas_major_version" -eq "$tls_first_major" \
- -a "$gcc_cv_gas_minor_version" -ge "$tls_first_minor" \
- -o "$gcc_cv_gas_major_version" -gt "$tls_first_major"; then
+elif test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq $tls_first_major \
+&& test $gcc_cv_gas_minor_version -ge $tls_first_minor \
+|| test $gcc_cv_gas_major_version -gt $tls_first_major ; then
+
+
gcc_cv_as_tls=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
if $gcc_cv_as --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:8029: checking assembler supports explicit relocations" >&5
+echo "configure:8327: checking assembler supports explicit relocations" >&5
if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_explicit_relocs=unknown
- if test x$gcc_cv_gas_major_version != x \
- -a x$gcc_cv_gas_minor_version != x
- then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 12 \
- -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_explicit_relocs=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
cat > conftest.s << 'EOF'
.set nomacro
;;
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8079: checking assembler .register pseudo-op support" >&5
+echo "configure:8380: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:8107: checking assembler supports -relax" >&5
+echo "configure:8408: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:8135: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:8436: checking assembler and linker support unaligned pc related relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:8162: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:8463: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8202: checking for assembler offsetable %lo() support" >&5
+echo "configure:8503: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-* | x86_64-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8241: checking assembler instructions" >&5
+echo "configure:8542: checking assembler instructions" >&5
gcc_cv_as_instructions=
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 9 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_instructions="filds fists"
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
while test $# -gt 0
echo "$ac_t""$gcc_cv_as_instructions" 1>&6
echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:8268: checking assembler GOTOFF in data directives" >&5
+echo "configure:8576: checking assembler GOTOFF in data directives" >&5
gcc_cv_as_gotoff_in_data=no
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
- then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_gotoff_in_data=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
cat > conftest.s <<EOF
.text
echo "$ac_t""$gcc_cv_as_gotoff_in_data" 1>&6
;;
+
+ ia64*-*-*)
+ echo $ac_n "checking assembler supports ltoffx and ldxmov""... $ac_c" 1>&6
+echo "configure:8610: checking assembler supports ltoffx and ldxmov" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ gcc_cv_as_ltoffx_ldxmov_relocs=unknown
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 14 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_ltoffx_ldxmov_relocs=yes
+
+
+fi
+
+ elif test x$gcc_cv_as != x; then
+ cat > conftest.s << 'EOF'
+ .text
+ addl r15 = @ltoffx(x#), gp
+ ;;
+ ld8.mov r16 = [r15], x#
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_ltoffx_ldxmov_relocs=yes
+ else
+ gcc_cv_as_ltoffx_ldxmov_relocs=no
+ fi
+ rm -f conftest.s conftest.o
+ fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_ltoffx_ldxmov_relocs" 1>&6
+ if test "x$gcc_cv_as_ltoffx_ldxmov_relocs" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1
+EOF
+
+ fi
+ ;;
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:8298: checking assembler dwarf2 debug_line support" >&5
+echo "configure:8655: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# version to the per-target configury.
case "$target" in
i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-* | m68*-*-* \
- | x86_64*-*-* | hppa*-*-* | arm*-*-* | strongarm*-*-* | xscale*-*-*)
+ | x86_64*-*-* | hppa*-*-* | arm*-*-* | strongarm*-*-* | xscale*-*-* | xstormy16*-*-*)
insn="nop"
;;
ia64*-*-*)
insn="nop 0"
;;
esac
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_dwarf2_debug_line="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_dwarf2_debug_line="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo ' .file 1 "conftest.s"' > conftest.s
echo ' .loc 1 3 0' >> conftest.s
echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:8355: checking assembler --gdwarf2 support" >&5
+echo "configure:8717: checking assembler --gdwarf2 support" >&5
gcc_cv_as_gdwarf2_flag=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_gdwarf2_flag="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_gdwarf2_flag="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo '' > conftest.s
# ??? This fails with non-gnu grep.
echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:8384: checking assembler --gstabs support" >&5
+echo "configure:8751: checking assembler --gstabs support" >&5
gcc_cv_as_gstabs_flag=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_gstabs_flag="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_gstabs_flag="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo '' > conftest.s
# ??? This fails with non-gnu grep.
echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
-echo "configure:8412: checking linker read-only and read-write section mixing" >&5
+echo "configure:8784: checking linker read-only and read-write section mixing" >&5
gcc_cv_ld_ro_rw_mix=unknown
-if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
+if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
gcc_cv_ld_ro_rw_mix=read-write
fi
echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:8450: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:8822: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
-if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
+if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
gcc_cv_ld_eh_frame_hdr=yes
fi
case "$target" in
mips*-*-*)
echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:8474: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:8846: checking whether libgloss uses STARTUP directives consistently" >&5
gcc_cv_mips_libgloss_startup=no
gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
if test "x$exec_prefix" = xNONE; then
fi
echo "$ac_t""$gcc_cv_mips_libgloss_startup" 1>&6
+
+ echo $ac_n "checking whether the assembler has explicit relocation support""... $ac_c" 1>&6
+echo "configure:8874: checking whether the assembler has explicit relocation support" >&5
+ if test x$gcc_cv_mips_explicit_relocs = x; then
+ gcc_cv_mips_explicit_relocs=no
+ if test x$gcc_cv_as != x; then
+ echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
+ if $gcc_cv_as conftest.s -o conftest.o > /dev/null 2>&1; then
+ gcc_cv_mips_explicit_relocs=yes
+ fi
+ rm -f conftest.s conftest.o
+ fi
+ fi
+ if test $gcc_cv_mips_explicit_relocs = yes; then
+ test x$target_cpu_default != x || target_cpu_default=0
+ target_cpu_default="(${target_cpu_default}|MASK_EXPLICIT_RELOCS)"
+ fi
+ echo "$ac_t""$gcc_cv_mips_explicit_relocs" 1>&6
;;
esac
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8679: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:9069: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
rm -f Make-hooks
touch Make-hooks
-target_list="all.build all.cross start.encap rest.encap \
+target_list="all.build all.cross start.encap rest.encap tags \
info dvi generated-manpages \
install-normal install-common install-info install-man \
uninstall \
fi
echo "source ${srcdir}/gdbinit.in" >> .gdbinit
-# Define variables host_canonical and build_canonical
-# because some Cygnus local changes in the Makefile depend on them.
-build_canonical=${build}
-host_canonical=${host}
-target_subdir=
-if test "${host}" != "${target}" ; then
- target_subdir=${target_alias}/
-fi
-
-
-
-
# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
# absolute path for gcc_tooldir based on inserting the number of up-directory
# movements required to get from $(exec_prefix) to $(prefix) into the basic
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@build_canonical@%$build_canonical%g
+s%@host_canonical@%$host_canonical%g
+s%@target_subdir@%$target_subdir%g
s%@CC@%$CC%g
s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
+s%@CPP@%$CPP%g
s%@GNATBIND@%$GNATBIND%g
s%@ADAC@%$ADAC%g
s%@strict1_warn@%$strict1_warn%g
-s%@CPP@%$CPP%g
s%@warn_cflags@%$warn_cflags%g
-s%@enable_multilib@%$enable_multilib%g
s%@WERROR@%$WERROR%g
s%@nocommon_flag@%$nocommon_flag%g
s%@valgrind_path@%$valgrind_path%g
s%@valgrind_path_defines@%$valgrind_path_defines%g
s%@valgrind_command@%$valgrind_command%g
s%@coverage_flags@%$coverage_flags%g
+s%@enable_multilib@%$enable_multilib%g
s%@enable_shared@%$enable_shared%g
s%@TARGET_SYSTEM_ROOT@%$TARGET_SYSTEM_ROOT%g
s%@TARGET_SYSTEM_ROOT_DEFINE@%$TARGET_SYSTEM_ROOT_DEFINE%g
s%@CROSS_SYSTEM_HEADER_DIR@%$CROSS_SYSTEM_HEADER_DIR%g
-s%@stage1_cflags@%$stage1_cflags%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AWK@%$AWK%g
s%@LN@%$LN%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
s%@GENERATED_MANPAGES@%$GENERATED_MANPAGES%g
+s%@make_compare_target@%$make_compare_target%g
s%@FLEX@%$FLEX%g
s%@BISON@%$BISON%g
+s%@stage1_cflags@%$stage1_cflags%g
s%@COLLECT2_LIBS@%$COLLECT2_LIBS%g
s%@GNAT_LIBEXC@%$GNAT_LIBEXC%g
+s%@LDEXP_LIB@%$LDEXP_LIB%g
s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
s%@LIBICONV@%$LIBICONV%g
s%@manext@%$manext%g
s%@zlibdir@%$zlibdir%g
s%@zlibinc@%$zlibinc%g
s%@MAINT@%$MAINT%g
-s%@build_canonical@%$build_canonical%g
-s%@host_canonical@%$host_canonical%g
-s%@target_subdir@%$target_subdir%g
s%@gcc_tooldir@%$gcc_tooldir%g
s%@dollar@%$dollar%g
s%@slibdir@%$slibdir%g
OSDN Git Service
