# Check whether --enable-intermodule or --disable-intermodule was given.
if test "${enable_intermodule+set}" = set; then
enableval="$enable_intermodule"
- case "${enable_intermodule}" in
- yes) onestep=-onestep : ;;
- *) onestep= : ;;
+ case ${enable_intermodule} in
+ yes) onestep="-onestep";;
+ *) onestep="";;
esac
+else
+ onestep=""
fi
# -------------------------
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2361: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2363: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Find some useful tools
-for ac_prog in mawk gawk nawk awk
+for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2394: checking for $ac_word" >&5
+echo "configure:2396: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2424: checking whether ln works" >&5
+echo "configure:2426: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2456: checking whether ln -s works" >&5
+echo "configure:2458: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2490: checking for $ac_word" >&5
+echo "configure:2492: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2528: checking for a BSD compatible install" >&5
+echo "configure:2530: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+# See if cmp has --ignore-initial.
+echo $ac_n "checking for cmp's capabilities""... $ac_c" 1>&6
+echo "configure:2582: checking for cmp's capabilities" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo abfoo >t1
+ echo cdfoo >t2
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ gcc_cv_prog_cmp_skip=slowcompare
+ else
+ gcc_cv_prog_cmp_skip=gnucompare
+ fi
+ else
+ gcc_cv_prog_cmp_skip=slowcompare
+ fi
+ rm t1 t2
+
+fi
+
+echo "$ac_t""$gcc_cv_prog_cmp_skip" 1>&6
+make_compare_target=$gcc_cv_prog_cmp_skip
+
+
+
# See if we have the mktemp command.
# Extract the first word of "mktemp", so it can be a program name with args.
set dummy mktemp; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2582: checking for $ac_word" >&5
+echo "configure:2610: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2621: checking for $ac_word" >&5
+echo "configure:2649: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2650: checking for modern makeinfo" >&5
+echo "configure:2678: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2656: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2684: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
4.[2-9]*)
# Is pod2man recent enough to regenerate manpages?
echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:2684: checking for recent Pod::Man" >&5
+echo "configure:2712: checking for recent Pod::Man" >&5
if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
echo "$ac_t""yes" 1>&6
GENERATED_MANPAGES=generated-manpages
GENERATED_MANPAGES=
fi
-# 'make compare' can be significantly faster, if cmp itself can
-# skip bytes instead of using tail. The test being performed is
-# "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
-# but we need to sink errors and handle broken shells.
-echo $ac_n "checking for cmp's capabilities""... $ac_c" 1>&6
-echo "configure:2698: checking for cmp's capabilities" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo abfoo >t1
- echo cdfoo >t2
- if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
- if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
- gcc_cv_prog_cmp_skip=slowcompare
- else
- gcc_cv_prog_cmp_skip=gnucompare
- fi
- else
- gcc_cv_prog_cmp_skip=slowcompare
- fi
- rm t1 t2
-
-fi
-
-echo "$ac_t""$gcc_cv_prog_cmp_skip" 1>&6
-make_compare_target=$gcc_cv_prog_cmp_skip
-
-
# How about lex?
if test -f $srcdir/../flex/skel.c; then
FLEX='$(objdir)/../flex/flex'
# Build, host, and target specific configuration fragments
# --------------------------------------------------------
+# Collect build-machine-specific information.
+. ${srcdir}/config.build
+
+# Collect host-machine-specific information.
+. ${srcdir}/config.host
+
target_gtfiles=
-build_xm_file=
-build_xm_defines=
-build_install_headers_dir=install-headers-tar
-build_exeext=
-host_xm_file=
-host_xm_defines=
-host_xmake_file=
-host_exeext=
-
-# Decode the host machine, then the target machine.
-# For the host machine, we save the xm_file variable as host_xm_file;
-# then we decode the target machine and forget everything else
-# that came from the host machine.
-for machine in $build $host $target; do
+
+# Collect target-machine-specific information.
+for machine in $target ; do
. ${srcdir}/config.gcc
done
extra_modes_file='$(srcdir)'/config/${extra_modes}
cat >> confdefs.h <<EOF
-#define EXTRA_MODES_FILE "$extra_modes"
+#define EXTRA_MODES_FILE "config/$extra_modes"
EOF
cat >> confdefs.h <<\EOF
. ../intl/config.intl
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:5394: checking whether NLS is requested" >&5
+echo "configure:5389: checking whether NLS is requested" >&5
if test x"$USE_NLS" != xyes; then
echo "$ac_t""no" 1>&6
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:5405: checking for catalogs to be installed" >&5
+echo "configure:5400: checking for catalogs to be installed" >&5
# Look for .po and .gmo files in the source directory.
CATALOGS=
XLINGUAS=
case $host_os in
win32 | pe | cygwin* | mingw32* | uwin*)
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:5455: checking whether windows registry support is requested" >&5
+echo "configure:5450: checking whether windows registry support is requested" >&5
if test "x$enable_win32_registry" != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:5464: checking for library containing RegOpenKeyExA" >&5
+echo "configure:5459: checking for library containing RegOpenKeyExA" >&5
if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_RegOpenKeyExA="no"
cat > conftest.$ac_ext <<EOF
-#line 5471 "configure"
+#line 5466 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:5482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="none required"
else
test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5493 "configure"
+#line 5488 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:5504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="-l$i"
break
if test "x$enable_win32_registry" != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:5546: checking registry key on windows hosts" >&5
+echo "configure:5541: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
cd $holddir
# Conditionalize the makefile for this host machine.
-# Make-host contains the concatenation of all host makefile fragments
-# [there can be more than one]. This file is built by configure.frag.
-host_overrides=Make-host
-dep_host_xmake_file=
-for f in .. ${host_xmake_file}
+xmake_file=
+for f in ${host_xmake_file}
do
if test -f ${srcdir}/config/$f
then
- dep_host_xmake_file="${dep_host_xmake_file} ${srcdir}/config/$f"
+ xmake_file="${xmake_file} \$(srcdir)/config/$f"
fi
done
# Conditionalize the makefile for this target machine.
-# Make-target contains the concatenation of all host makefile fragments
-# [there can be more than one]. This file is built by configure.frag.
-target_overrides=Make-target
-dep_tmake_file=
-for f in .. ${tmake_file}
+tmake_file_=
+for f in ${tmake_file}
do
if test -f ${srcdir}/config/$f
then
- dep_tmake_file="${dep_tmake_file} ${srcdir}/config/$f"
+ tmake_file_="${tmake_file_} \$(srcdir)/config/$f"
fi
done
+tmake_file="${tmake_file_}"
symbolic_link='ln -s'
out_object_file=`basename $out_file .c`.o
tm_file_list=
+tm_include_list=
for f in $tm_file; do
case $f in
- ansidecl.h )
- tm_file_list="${tm_file_list} \$(srcdir)/../include/ansidecl.h" ;;
defaults.h )
- tm_file_list="${tm_file_list} \$(srcdir)/$f" ;;
- *) tm_file_list="${tm_file_list} \$(srcdir)/config/$f" ;;
+ tm_file_list="${tm_file_list} \$(srcdir)/$f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
+ * )
+ tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
+ tm_include_list="${tm_include_list} config/$f"
+ ;;
esac
done
tm_p_file_list=
+tm_p_include_list=
for f in $tm_p_file; do
case $f in
tm-preds.h )
- tm_p_file_list="${tm_p_file_list} $f" ;;
- *) tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f" ;;
+ tm_p_file_list="${tm_p_file_list} $f"
+ tm_p_include_list="${tm_p_include_list} $f"
+ ;;
+ * )
+ tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f"
+ tm_p_include_list="${tm_p_include_list} config/$f"
+ esac
+done
+
+xm_file_list=
+xm_include_list=
+for f in $xm_file; do
+ case $f in
+ ansidecl.h )
+ xm_file_list="${xm_file_list} \$(srcdir)/../include/$f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ auto-host.h )
+ xm_file_list="${xm_file_list} $f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ * )
+ xm_file_list="${xm_file_list} \$(srcdir)/config/$f"
+ xm_include_list="${xm_include_list} config/$f"
+ ;;
esac
done
host_xm_file_list=
+host_xm_include_list=
for f in $host_xm_file; do
case $f in
ansidecl.h )
- host_xm_file_list="${host_xm_file_list} \$(srcdir)/../include/ansidecl.h" ;;
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/../include/$f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
auto-host.h )
- host_xm_file_list="${host_xm_file_list} $f" ;;
- defaults.h )
- host_xm_file_list="${host_xm_file_list} \$(srcdir)/$f" ;;
- *) host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f" ;;
+ host_xm_file_list="${host_xm_file_list} $f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
+ * )
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
+ host_xm_include_list="${host_xm_include_list} config/$f"
+ ;;
esac
done
for f in $build_xm_file; do
case $f in
ansidecl.h )
- build_xm_file_list="${build_xm_file_list} \$(srcdir)/../include/ansidecl.h" ;;
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/../include/$f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
auto-build.h | auto-host.h )
- build_xm_file_list="${build_xm_file_list} $f" ;;
- defaults.h )
- host_xm_file_list="${host_xm_file_list} \$(srcdir)/$f" ;;
- *) build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f" ;;
+ build_xm_file_list="${build_xm_file_list} $f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
+ * )
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
+ build_xm_include_list="${build_xm_include_list} config/$f"
+ ;;
esac
done
ALL=all.cross
SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
case "$host","$target" in
+ # Darwin crosses can use the host system's libraries and headers,
+ # because of the fat library support. Of course, it must be the
+ # same version of Darwin on both sides. Allow the user to
+ # just say --target=foo-darwin without a version number to mean
+ # "the version on this system".
+ *-*-darwin*,*-*-darwin*)
+ hostos=`echo $host | sed 's/.*-darwin/darwin/'`
+ targetos=`echo $target | sed 's/.*-darwin/darwin/'`
+ if test $hostos = $targetos -o $targetos = darwin ; then
+ CROSS=
+ SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)'
+ with_headers=yes
+ fi
+ ;;
+
i?86-*-*,x86_64-*-* \
| powerpc*-*-*,powerpc64*-*-*)
CROSS="$CROSS -DNATIVE_CROSS" ;;
inhibit_libc=
if { { test x$host != x$target && test "x$with_sysroot" = x ; } ||
test x$with_newlib = xyes ; } &&
- test "x$with_headers" = x ; then
+ { test "x$with_headers" = x || test "x$with_headers" = xno ; } ; then
inhibit_libc=-Dinhibit_libc
fi
# build->target assembler and hope that it will have the same features
# as the host->target assembler we'll be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:5756: checking what assembler to use" >&5
+echo "configure:5800: checking what assembler to use" >&5
in_tree_gas=no
gcc_cv_as=
gcc_cv_gas_major_version=
# build->target linker and hope that it will have the same features
# as the host->target linker we'll be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:5880: checking what linker to use" >&5
+echo "configure:5924: checking what linker to use" >&5
in_tree_ld=no
gcc_cv_ld=
gcc_cv_gld_major_version=
# Figure out what nm we will be using.
gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:5988: checking what nm to use" >&5
+echo "configure:6032: checking what nm to use" >&5
in_tree_nm=no
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:6011: checking what objdump to use" >&5
+echo "configure:6055: checking what objdump to use" >&5
in_tree_objdump=no
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler for .balign and .p2align""... $ac_c" 1>&6
-echo "configure:6036: checking assembler for .balign and .p2align" >&5
+echo "configure:6080: checking assembler for .balign and .p2align" >&5
if eval "test \"`echo '$''{'gcc_cv_as_balign_and_p2align'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
elif test x$gcc_cv_as != x; then
echo '.balign 4
.p2align 2' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6092: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_balign_and_p2align=yes
else
fi
echo $ac_n "checking assembler for .p2align with maximum skip""... $ac_c" 1>&6
-echo "configure:6068: checking assembler for .p2align with maximum skip" >&5
+echo "configure:6112: checking assembler for .p2align with maximum skip" >&5
if eval "test \"`echo '$''{'gcc_cv_as_max_skip_p2align'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo '.p2align 4,,7' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6123: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_max_skip_p2align=yes
else
fi
echo $ac_n "checking assembler for working .subsection -1""... $ac_c" 1>&6
-echo "configure:6099: checking assembler for working .subsection -1" >&5
+echo "configure:6143: checking assembler for working .subsection -1" >&5
if eval "test \"`echo '$''{'gcc_cv_as_subsection_m1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.subsection -1
conftest_label2: .word 0
.previous' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_nm != x; then
$gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
fi
echo $ac_n "checking assembler for .weak""... $ac_c" 1>&6
-echo "configure:6142: checking assembler for .weak" >&5
+echo "configure:6186: checking assembler for .weak" >&5
if eval "test \"`echo '$''{'gcc_cv_as_weak'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo ' .weak foobar' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6153: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_weak=yes
else
# to be safe.
# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
echo $ac_n "checking assembler for .hidden""... $ac_c" 1>&6
-echo "configure:6180: checking assembler for .hidden" >&5
+echo "configure:6224: checking assembler for .hidden" >&5
if eval "test \"`echo '$''{'gcc_cv_as_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
elif test x$gcc_cv_as != x; then
echo ' .hidden foobar
foobar:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6193: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6237: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_hidden=yes
else
echo $ac_n "checking linker for .hidden support""... $ac_c" 1>&6
-echo "configure:6208: checking linker for .hidden support" >&5
+echo "configure:6252: checking linker for .hidden support" >&5
if eval "test \"`echo '$''{'gcc_cv_ld_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
else
gcc_cv_ld_hidden=yes
- ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
if echo "$ld_ver" | grep GNU > /dev/null; then
ld_vers=`echo $ld_ver | sed -n \
-e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
fi
fi
else
- case "$target" in
- mips-sgi-irix[56]*)
- if test x"$gnu_ld_flag" = x"no"; then
- # Even if using gas with .hidden support, the resulting object files
- # cannot be linked with the IRIX 5 and IRIX 6 O32 linkers. With
- # the IRIX 6 N32 and N64 linkers, the problem is that the linker
- # refuses to accept -call_shared (passed by default to the
- # linker) and -r (used to link the object file generated without
- # .hidden directives with one that hides symbols), so we also lose.
- gcc_cv_ld_hidden=no
- fi
- ;;
- esac
+ # non-GNU linkers don't seem to support .hidden yet
+ if test x"$gnu_ld_flag" = x"no"; then
+ gcc_cv_ld_hidden=no
+ fi
fi
fi
fi
# Check if we have .[us]leb128, and support symbol arithmetic with it.
echo $ac_n "checking assembler for .sleb128 and .uleb128""... $ac_c" 1>&6
-echo "configure:6282: checking assembler for .sleb128 and .uleb128" >&5
+echo "configure:6317: checking assembler for .sleb128 and .uleb128" >&5
if eval "test \"`echo '$''{'gcc_cv_as_leb128'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.uleb128 1280
.sleb128 -1010
L2:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6299: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6334: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# GAS versions before 2.11 do not support uleb128,
# despite appearing to.
# ??? There exists an elf-specific test that will crash
# the assembler. Perhaps it's better to figure out whether
# arbitrary sections are supported and try the test.
- as_ver=`$gcc_cv_as --version 2>/dev/null | head -1`
+ as_ver=`$gcc_cv_as --version 2>/dev/null | sed 1q`
if echo "$as_ver" | grep GNU > /dev/null; then
as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
as_major=`echo $as_ver | sed 's/\..*//'`
# GAS versions up to and including 2.11.0 may mis-optimize
# .eh_frame data.
echo $ac_n "checking assembler for eh_frame optimization""... $ac_c" 1>&6
-echo "configure:6335: checking assembler for eh_frame optimization" >&5
+echo "configure:6370: checking assembler for eh_frame optimization" >&5
if eval "test \"`echo '$''{'gcc_cv_as_eh_frame'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.byte 0x4
.4byte .L1-.LFB1
.LEFDE1:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6413: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
cat > conftest.lit <<EOF
0000 10000000 00000000 017a0001 781a0004 .........z..x...
|| cmp conftest.big conftest.got > /dev/null 2>&1; }
then
gcc_cv_as_eh_frame=yes
- elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'; { (eval echo configure:6399: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'; { (eval echo configure:6434: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
gcc_cv_as_eh_frame=buggy
else
# Uh oh, what do we do now?
fi
echo $ac_n "checking assembler for section merging support""... $ac_c" 1>&6
-echo "configure:6424: checking assembler for section merging support" >&5
+echo "configure:6459: checking assembler for section merging support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_shf_merge'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6436: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_shf_merge=yes
else
tls_first_minor=14
tls_as_opt="-m64 -Aesame"
;;
+ sparc*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ sethi %tgd_hi22(foo), %o0
+ add %o0, %tgd_lo10(foo), %o1
+ add %l7, %o1, %o0, %tgd_add(foo)
+ call __tls_get_addr, %tgd_call(foo)
+ sethi %tldm_hi22(foo), %l1
+ add %l1, %tldm_lo10(foo), %l2
+ add %l7, %l2, %o0, %tldm_add(foo)
+ call __tls_get_addr, %tldm_call(foo)
+ sethi %tldo_hix22(foo), %l3
+ xor %l3, %tldo_lox10(foo), %l4
+ add %o0, %l4, %l5, %tldo_add(foo)
+ sethi %tie_hi22(foo), %o3
+ add %o3, %tie_lo10(foo), %o3
+ ld [%l7 + %o3], %o2, %tie_ld(foo)
+ add %g7, %o2, %o4, %tie_add(foo)
+ sethi %tle_hix22(foo), %l1
+ xor %l1, %tle_lox10(foo), %o5
+ ld [%g7 + %o5], %o1'
+ tls_first_major=2
+ tls_first_minor=14
+ tls_as_opt=-32
+ ;;
esac
if test -z "$tls_first_major"; then
: # If we don't have a check, assume no support.
else
echo $ac_n "checking assembler for thread-local storage support""... $ac_c" 1>&6
-echo "configure:6635: checking assembler for thread-local storage support" >&5
+echo "configure:6697: checking assembler for thread-local storage support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_tls'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6708: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_tls=yes
else
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
-echo "configure:6672: checking assembler for explicit relocation support" >&5
+echo "configure:6734: checking assembler for explicit relocation support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_alpha_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ldah $1, d($29) !gprelhigh
lda $1, d($1) !gprellow
lda $29, 0($29) !gpdisp!3' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_alpha_explicit_relocs=yes
else
sparc*-*-*)
echo $ac_n "checking assembler for .register""... $ac_c" 1>&6
-echo "configure:6717: checking assembler for .register" >&5
+echo "configure:6779: checking assembler for .register" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_register_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_sparc_register_op=no
if test x$gcc_cv_as != x; then
echo '.register %g2, #scratch' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6724: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_sparc_register_op=yes
else
fi
echo $ac_n "checking assembler for -relax option""... $ac_c" 1>&6
-echo "configure:6744: checking assembler for -relax option" >&5
+echo "configure:6806: checking assembler for -relax option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_relax'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_sparc_relax=no
if test x$gcc_cv_as != x; then
echo '.text' > conftest.s
- if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'; { (eval echo configure:6751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'; { (eval echo configure:6813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_sparc_relax=yes
else
fi
echo $ac_n "checking assembler for unaligned pcrel relocs""... $ac_c" 1>&6
-echo "configure:6771: checking assembler for unaligned pcrel relocs" >&5
+echo "configure:6833: checking assembler for unaligned pcrel relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.align 4
.byte 0
.uaword %r_disp32(foo)' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6784: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_ld != x \
&& $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
echo $ac_n "checking assembler for unaligned pcrel relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:6807: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
+echo "configure:6869: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.hidden foo
foo:
.skip 4' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6822: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6884: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
&& $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
fi # unaligned pcrel relocs
echo $ac_n "checking assembler for offsetable %lo()""... $ac_c" 1>&6
-echo "configure:6855: checking assembler for offsetable %lo()" >&5
+echo "configure:6917: checking assembler for offsetable %lo()" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo '.text
or %g1, %lo(ab) + 12, %g1
or %g1, %lo(ab + 12), %g1' > conftest.s
- if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'; { (eval echo configure:6864: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'; { (eval echo configure:6926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_objdump != x \
&& %gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
i[34567]86-*-* | x86_64-*-*)
echo $ac_n "checking assembler for filds and fists mnemonics""... $ac_c" 1>&6
-echo "configure:6890: checking assembler for filds and fists mnemonics" >&5
+echo "configure:6952: checking assembler for filds and fists mnemonics" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ix86_filds_fists'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo 'filds mem; fists mem' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ix86_filds_fists=yes
else
fi
+ echo $ac_n "checking assembler for cmov syntax""... $ac_c" 1>&6
+echo "configure:6983: checking assembler for cmov syntax" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ix86_cmov_sun_syntax'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_ix86_cmov_sun_syntax=no
+ if test x$gcc_cv_as != x; then
+ echo 'cmovl.l %edx, %eax' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6990: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_ix86_cmov_sun_syntax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+
+echo "$ac_t""$gcc_cv_as_ix86_cmov_sun_syntax" 1>&6
+if test $gcc_cv_as_ix86_cmov_sun_syntax = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_IX86_CMOV_SUN_SYNTAX 1
+EOF
+
+fi
+
# This one is used unconditionally by i386.[ch]; it is to be defined
# to 1 if the feature is present, 0 otherwise.
echo $ac_n "checking assembler for GOTOFF in data""... $ac_c" 1>&6
-echo "configure:6923: checking assembler for GOTOFF in data" >&5
+echo "configure:7012: checking assembler for GOTOFF in data" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ix86_gotoff_in_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
nop
.data
.long .L0@GOTOFF' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6938: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ix86_gotoff_in_data=yes
else
ia64*-*-*)
echo $ac_n "checking assembler for ltoffx and ldxmov relocs""... $ac_c" 1>&6
-echo "configure:6959: checking assembler for ltoffx and ldxmov relocs" >&5
+echo "configure:7048: checking assembler for ltoffx and ldxmov relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ia64_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
addl r15 = @ltoffx(x#), gp
;;
ld8.mov r16 = [r15], x#' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
else
mfcr 3,128"
echo $ac_n "checking assembler for mfcr field support""... $ac_c" 1>&6
-echo "configure:7003: checking assembler for mfcr field support" >&5
+echo "configure:7092: checking assembler for mfcr field support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_powerpc_mfcrf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_powerpc_mfcrf=yes
else
mips*-*-*)
echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
-echo "configure:7036: checking assembler for explicit relocation support" >&5
+echo "configure:7125: checking assembler for explicit relocation support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_mips_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_mips_explicit_relocs=yes
else
.loc 1 3 0
$insn"
echo $ac_n "checking assembler for dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7093: checking assembler for dwarf2 debug_line support" >&5
+echo "configure:7182: checking assembler for dwarf2 debug_line support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_debug_line'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# ??? This fails with non-gnu grep. Maybe use objdump?
if grep debug_line conftest.o > /dev/null 2>&1; then
# by DW_AT_decl_file. Approximate this test by testing if
# the assembler bitches if the same index is assigned twice.
echo $ac_n "checking assembler for buggy dwarf2 .file directive""... $ac_c" 1>&6
-echo "configure:7127: checking assembler for buggy dwarf2 .file directive" >&5
+echo "configure:7216: checking assembler for buggy dwarf2 .file directive" >&5
if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_file_buggy'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test x$gcc_cv_as != x; then
echo ' .file 1 "foo.s"
.file 1 "bar.s"' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7224: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_dwarf2_file_buggy=yes
else
fi
echo $ac_n "checking assembler for --gdwarf2 option""... $ac_c" 1>&6
-echo "configure:7158: checking assembler for --gdwarf2 option" >&5
+echo "configure:7247: checking assembler for --gdwarf2 option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_gdwarf2_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$insn" > conftest.s
- if { ac_try='$gcc_cv_as --gdwarf2 -o conftest.o conftest.s >&5'; { (eval echo configure:7170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gdwarf2 -o conftest.o conftest.s >&5'; { (eval echo configure:7259: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_gdwarf2_flag=yes
else
fi
echo $ac_n "checking assembler for --gstabs option""... $ac_c" 1>&6
-echo "configure:7190: checking assembler for --gstabs option" >&5
+echo "configure:7279: checking assembler for --gstabs option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_gstabs_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$insn" > conftest.s
- if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s >&5'; { (eval echo configure:7202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s >&5'; { (eval echo configure:7291: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# The native Solaris 9/Intel assembler doesn't understand --gstabs
# and warns about it, but still exits successfully. So check for
# this.
- if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'; { (eval echo configure:7207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'; { (eval echo configure:7296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then :
else gcc_cv_as_gstabs_flag=yes
fi
fi
echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
-echo "configure:7229: checking linker read-only and read-write section mixing" >&5
+echo "configure:7318: checking linker read-only and read-write section mixing" >&5
gcc_cv_ld_ro_rw_mix=unknown
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7268: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:7357: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
echo $ac_n "checking linker position independent executable support""... $ac_c" 1>&6
-echo "configure:7290: checking linker position independent executable support" >&5
+echo "configure:7379: checking linker position independent executable support" >&5
gcc_cv_ld_pie=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 15 -o "$gcc_cv_gld_major_version" -gt 2 \
case "$target" in
mips*-*-*)
echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:7315: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:7404: checking whether libgloss uses STARTUP directives consistently" >&5
gcc_cv_mips_libgloss_startup=no
gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
if test "x$exec_prefix" = xNONE; then
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/*/config-lang.in ..
+for lang in ${srcdir}/*/config-lang.in
do
case $lang in
- ..)
- ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/[*]/config-lang.in)
expected_languages=`echo ,${enable_languages}, | sed -e 's:,: :g' -e 's: *: :g' -e 's: *: :g' -e 's:^ ::' -e 's: $::'`
found_languages=
subdirs=
-for lang in ${srcdir}/*/config-lang.in ..
+for lang in ${srcdir}/*/config-lang.in
do
case $lang in
- ..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/[*]/config-lang.in) ;;
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7520: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7606: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
all_stagestuff=
all_outputs='Makefile fixinc/Makefile gccbug mklibgcc mkheaders'
# List of language makefile fragments.
+all_lang_makefrags=
+# List of language subdirectory makefiles. Deprecated.
all_lang_makefiles=
# Files for gengtype
all_gtfiles="$target_gtfiles"
# The other mechanism is a set of hooks for each of the main targets
# like `clean', `install', etc.
-language_fragments="Make-lang"
language_hooks="Make-hooks"
-for s in .. $subdirs
+for s in $subdirs
do
- if test $s != ".."
- then
language=
boot_language=
compilers=
echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
exit 1
fi
- all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in"
+ all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$s/Make-lang.in"
if test -f ${srcdir}/$s/Makefile.in
- then all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Makefile.in"
+ then all_lang_makefiles="$s/Makefile"
fi
all_languages="$all_languages $language"
if test "x$boot_language" = xyes
all_stagestuff="$all_stagestuff $stagestuff"
all_outputs="$all_outputs $outputs"
all_gtfiles="$all_gtfiles $gtfiles"
- for f in .. $gtfiles
+ for f in $gtfiles
do
- if test $f != ".."
- then
all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
- fi
done
- fi
done
# Pick up gtfiles for c
s="c"
. ${srcdir}/c-config-lang.in
all_gtfiles="$all_gtfiles $gtfiles"
-for f in .. $gtfiles
+for f in $gtfiles
do
- if test $f != ".."
- then
all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
- fi
done
check_languages=
-for language in .. $all_languages
+for language in $all_languages
do
- if test $language != ".."
- then
check_languages="$check_languages check-$language"
- fi
done
# Since we can't use `::' targets, we link each language in
for t in $target_list
do
x=
- for lang in .. $all_languages
+ for lang in $all_languages
do
- if test $lang != ".."; then
x="$x $lang.$t"
- fi
done
echo "lang.$t: $x" >> Make-hooks
done
objdir=`${PWDCMD-pwd}`
-# Process the language and host/target makefile fragments.
-${CONFIG_SHELL-/bin/sh} $srcdir/configure.frag $srcdir "$subdirs" "$dep_host_xmake_file" "$dep_tmake_file"
-
# Substitute configuration variables
-
# Echo that links are built
if test x$host = x$target
then
s%@INSTALL@%$INSTALL%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@make_compare_target@%$make_compare_target%g
s%@have_mktemp_command@%$have_mktemp_command%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
s%@GENERATED_MANPAGES@%$GENERATED_MANPAGES%g
-s%@make_compare_target@%$make_compare_target%g
s%@FLEX@%$FLEX%g
s%@BISON@%$BISON%g
s%@stage1_cflags@%$stage1_cflags%g
s%@all_gtfiles@%$all_gtfiles%g
s%@all_gtfiles_files_langs@%$all_gtfiles_files_langs%g
s%@all_gtfiles_files_files@%$all_gtfiles_files_files%g
+s%@all_lang_makefrags@%$all_lang_makefrags%g
s%@all_lang_makefiles@%$all_lang_makefiles%g
s%@all_languages@%$all_languages%g
s%@all_stagestuff@%$all_stagestuff%g
s%@build_exeext@%$build_exeext%g
s%@build_install_headers_dir@%$build_install_headers_dir%g
s%@build_xm_file_list@%$build_xm_file_list%g
-s%@build_xm_file@%$build_xm_file%g
+s%@build_xm_include_list@%$build_xm_include_list%g
s%@build_xm_defines@%$build_xm_defines%g
s%@check_languages@%$check_languages%g
s%@cc_set_by_configure@%$cc_set_by_configure%g
s%@quoted_cc_set_by_configure@%$quoted_cc_set_by_configure%g
s%@cpp_install_dir@%$cpp_install_dir%g
-s%@dep_host_xmake_file@%$dep_host_xmake_file%g
-s%@dep_tmake_file@%$dep_tmake_file%g
+s%@xmake_file@%$xmake_file%g
+s%@tmake_file@%$tmake_file%g
s%@extra_headers_list@%$extra_headers_list%g
s%@extra_objs@%$extra_objs%g
s%@extra_parts@%$extra_parts%g
s%@host_exeext@%$host_exeext%g
s%@host_extra_gcc_objs@%$host_extra_gcc_objs%g
s%@host_xm_file_list@%$host_xm_file_list%g
-s%@host_xm_file@%$host_xm_file%g
+s%@host_xm_include_list@%$host_xm_include_list%g
s%@host_xm_defines@%$host_xm_defines%g
s%@out_host_hook_obj@%$out_host_hook_obj%g
s%@install@%$install%g
s%@symbolic_link@%$symbolic_link%g
s%@thread_file@%$thread_file%g
s%@tm_file_list@%$tm_file_list%g
-s%@tm_file@%$tm_file%g
+s%@tm_include_list@%$tm_include_list%g
s%@tm_defines@%$tm_defines%g
s%@tm_p_file_list@%$tm_p_file_list%g
-s%@tm_p_file@%$tm_p_file%g
-s%@xm_file@%$xm_file%g
+s%@tm_p_include_list@%$tm_p_include_list%g
+s%@xm_file_list@%$xm_file_list%g
+s%@xm_include_list@%$xm_include_list%g
s%@xm_defines@%$xm_defines%g
s%@c_target_objs@%$c_target_objs%g
s%@cxx_target_objs@%$cxx_target_objs%g
s%@target_cpu_default@%$target_cpu_default%g
-/@target_overrides@/r $target_overrides
-s%@target_overrides@%%g
-/@host_overrides@/r $host_overrides
-s%@host_overrides@%%g
-/@language_fragments@/r $language_fragments
-s%@language_fragments@%%g
/@language_hooks@/r $language_hooks
s%@language_hooks@%%g
xauto-host.h:config.in)
echo > cstamp-h ;;
esac
+# Make sure all the subdirs exist.
+for d in $subdirs
+do
+ test -d $d || mkdir $d
+done
# If the host supports symlinks, point stage[1234] at ../stage[1234] so
# bootstrapping and the installation procedure can still use
# CC="stage1/xgcc -Bstage1/". If the host doesn't support symlinks,
# This is virtually a duplicate of what happens in configure.lang; we do
# an extra check to make sure this only happens if ln -s can be used.
if test "$symbolic_link" = "ln -s"; then
- for d in .. ${subdirs} fixinc ; do
- if test $d != ..; then
+ for d in ${subdirs} fixinc ; do
STARTDIR=`${PWDCMD-pwd}`
cd $d
for t in stage1 stage2 stage3 stage4 stageprofile stagefeedback include
$symbolic_link ../$t $t 2>/dev/null
done
cd $STARTDIR
- fi
done
else true ; fi
OSDN Git Service
