ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-version-specific-runtime-libs Specify that runtime libraries shou
+ld be installed in a compiler-specific directory "
+ac_help="$ac_help
+ --with-slibdir=DIR shared libraries in DIR [LIBDIR]"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:625: checking LIBRARY_PATH variable" >&5
+echo "configure:630: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:650: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:655: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
# Build a new-libstdc++ system (ie libstdc++-v3)
echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:766: checking for libstdc++ to install" >&5
+echo "configure:771: checking for libstdc++ to install" >&5
# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
if test "${enable_libstdcxx_v3+set}" = set; then
enableval="$enable_libstdcxx_v3"
gcc_gxx_include_dir='${libsubdir}/include/g++'
else
topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/g++"-${libstdcxx_interface}
+ gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
fi
fi
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1023: checking host system type" >&5
+echo "configure:1028: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1044: checking target system type" >&5
+echo "configure:1049: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1062: checking build system type" >&5
+echo "configure:1067: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1089: checking for $ac_word" >&5
+echo "configure:1094: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1119: checking for $ac_word" >&5
+echo "configure:1124: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1170: checking for $ac_word" >&5
+echo "configure:1175: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1202: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1207: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1213 "configure"
+#line 1218 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1244: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1249: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1249: checking whether we are using GNU C" >&5
+echo "configure:1254: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1263: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1277: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1282: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1310: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1315: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1313: checking whether cc understands -c and -o together" >&5
+echo "configure:1318: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1336: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1333: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1334: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1370: checking for long double" >&5
+echo "configure:1375: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1378 "configure"
+#line 1383 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1411: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1416: checking whether ${CC-cc} accepts -Wno-long-long" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="-Wno-long-long"
cat > conftest.$ac_ext <<EOF
-#line 1418 "configure"
+#line 1423 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1430: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_prog_cc_no_long_long=yes
else
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1469: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1474: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1497: checking whether a default assembler was specified" >&5
+echo "configure:1502: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1509: checking whether a default linker was specified" >&5
+echo "configure:1514: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
fi
echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:1521: checking for GNU C library" >&5
+echo "configure:1526: checking for GNU C library" >&5
if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1526 "configure"
+#line 1531 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1541: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_glibc=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1557: checking for inline" >&5
+echo "configure:1562: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1564 "configure"
+#line 1569 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1571: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1603: checking for $ac_word" >&5
+echo "configure:1608: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1633: checking whether ln works" >&5
+echo "configure:1638: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1665: checking whether ln -s works" >&5
+echo "configure:1670: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1697: checking for volatile" >&5
+echo "configure:1702: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1702 "configure"
+#line 1707 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1732: checking for $ac_word" >&5
+echo "configure:1737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1770: checking for a BSD compatible install" >&5
+echo "configure:1775: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1821: checking how to run the C preprocessor" >&5
+echo "configure:1826: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1836 "configure"
+#line 1841 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
+#line 1858 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1864: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1870 "configure"
+#line 1875 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1901: checking for ANSI C header files" >&5
+echo "configure:1906: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1906 "configure"
+#line 1911 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1931 "configure"
+#line 1936 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 1954 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1975 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2005: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2010: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2010 "configure"
+#line 2015 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2024: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2040: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2045: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2045 "configure"
+#line 2050 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2058: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2074: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2079: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2079 "configure"
+#line 2084 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2122: checking for $ac_hdr" >&5
+echo "configure:2127: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2127 "configure"
+#line 2132 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2137: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2162: checking for thread.h" >&5
+echo "configure:2167: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2167 "configure"
+#line 2172 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2196: checking for pthread.h" >&5
+echo "configure:2201: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2201 "configure"
+#line 2206 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2233: checking for $ac_word" >&5
+echo "configure:2238: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2270: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_have_mktemp_command="yes"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
+fi
+fi
+have_mktemp_command="$ac_cv_prog_have_mktemp_command"
+if test -n "$have_mktemp_command"; then
+ echo "$ac_t""$have_mktemp_command" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
# Do we have a single-tree copy of texinfo?
if test -f $srcdir/../texinfo/Makefile.in; then
MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2272: checking for $ac_word" >&5
+echo "configure:2309: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2301: checking for modern makeinfo" >&5
+echo "configure:2338: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2307: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2344: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
- 3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
+ 4.*)
gcc_cv_prog_makeinfo_modern=yes;;
*) gcc_cv_prog_makeinfo_modern=no;;
esac
if test $gcc_cv_prog_makeinfo_modern = no; then
echo "configure: warning:
*** Makeinfo is missing or too old.
-*** Info documentation will not be built or installed." 1>&2
+*** Info documentation will not be built." 1>&2
BUILD_INFO=
- INSTALL_INFO=
else
BUILD_INFO=info
- INSTALL_INFO=install-info
+fi
+
+# Is pod2man recent enough to regenerate manpages?
+echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
+echo "configure:2372: checking for recent Pod::Man" >&5
+if perl -e 'use 1.10 Pod::Man' >/dev/null 2>&1; then
+ echo "$ac_t""yes" 1>&6
+ GENERATED_MANPAGES=generated-manpages
+else
+ echo "$ac_t""no" 1>&6
+ GENERATED_MANPAGES=
fi
# How about lex?
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2342: checking for $ac_word" >&5
+echo "configure:2388: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "bison", so it can be a program name with args.
set dummy bison; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2379: checking for $ac_word" >&5
+echo "configure:2425: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2413: checking for preprocessor stringizing operator" >&5
+echo "configure:2459: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2418 "configure"
+#line 2464 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2451: checking for inttypes.h" >&5
+echo "configure:2497: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2456 "configure"
+#line 2502 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2464: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2510: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
# be either signed or unsigned.
#
echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2489: checking for unsigned enumerated bitfields" >&5
+echo "configure:2535: checking for unsigned enumerated bitfields" >&5
if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_enum_bf_unsigned=yes
else
cat > conftest.$ac_ext <<EOF
-#line 2497 "configure"
+#line 2543 "configure"
#include "confdefs.h"
#include <stdlib.h>
enum t { BLAH = 128 } ;
}
EOF
-if { (eval echo configure:2510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_enum_bf_unsigned=yes
else
for ac_func in strtoul bsearch putenv popen bcopy \
strchr strrchr kill getrlimit setrlimit atoll atoq \
sysconf isascii gettimeofday strsignal putc_unlocked fputc_unlocked \
- fputs_unlocked getrusage valloc iconv nl_langinfo
+ fputs_unlocked getrusage iconv nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2538: checking for $ac_func" >&5
+echo "configure:2584: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2543 "configure"
+#line 2589 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2592: checking for ssize_t" >&5
+echo "configure:2638: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2597 "configure"
+#line 2643 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2628: checking for uid_t in sys/types.h" >&5
+echo "configure:2674: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2679 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:2662: checking type of array argument to getgroups" >&5
+echo "configure:2708: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 2670 "configure"
+#line 2716 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:2695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 2709 "configure"
+#line 2755 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2750: checking for vprintf" >&5
+echo "configure:2796: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2755 "configure"
+#line 2801 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2802: checking for _doprnt" >&5
+echo "configure:2848: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2807 "configure"
+#line 2853 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2866: checking whether the printf functions support %p" >&5
+echo "configure:2912: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2874 "configure"
+#line 2920 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:2887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
case "${host}" in
*-*-uwin*)
- # Under some versions of uwin, vfork is notoriously buggy and the test
- # can hang configure; on other versions, vfork exists just as a stub.
- # FIXME: This should be removed once vfork in uwin's runtime is fixed.
- ac_cv_func_vfork_works=no
+ { echo "configure: error:
+*** UWIN may not be used as a host platform because
+*** linking with posix.dll is not allowed by the GNU GPL" 1>&2; exit 1; }
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2920: checking for pid_t" >&5
+echo "configure:2965: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2925 "configure"
+#line 2970 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2954: checking for vfork.h" >&5
+echo "configure:2999: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2959 "configure"
+#line 3004 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2989: checking for working vfork" >&5
+echo "configure:3034: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2995: checking for vfork" >&5
+echo "configure:3040: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3000 "configure"
+#line 3045 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:3023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 3045 "configure"
+#line 3090 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:3140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
fi
-for ac_hdr in unistd.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3166: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3171 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3205: checking for $ac_func" >&5
+echo "configure:3210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3210 "configure"
+#line 3215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
-echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6
-echo "configure:3258: checking for working mmap which provides zeroed pages anywhere" >&5
-if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_anywhere=no
-else
- cat > conftest.$ac_ext <<EOF
-#line 3266 "configure"
-#include "confdefs.h"
-
-/* Test by Richard Henderson and Alexandre Oliva.
- Check whether mmap MAP_ANONYMOUS or mmap from /dev/zero works. */
+# The test program for the next two tests is the same except for one
+# set of ifdefs.
+cat >ct-mmap.inc <<'EOF'
#include <sys/types.h>
-#include <fcntl.h>
#include <sys/mman.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <stdio.h>
#if !defined (MAP_ANONYMOUS) && defined (MAP_ANON)
# define MAP_ANONYMOUS MAP_ANON
#endif /* no HAVE_GETPAGESIZE */
-int main()
-{
- char *x;
- int fd, pg;
-
-#ifndef MAP_ANONYMOUS
- fd = open("/dev/zero", O_RDWR);
- if (fd < 0)
- exit(1);
+#ifndef MAP_FAILED
+# define MAP_FAILED -1
#endif
- pg = getpagesize();
-#ifdef MAP_ANONYMOUS
- x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+#undef perror_exit
+#define perror_exit(str, val) \
+ do { perror(str); exit(val); } while (0)
+
+/* Some versions of cygwin mmap require that munmap is called with the
+ same parameters as mmap. GCC expects that this is not the case.
+ Test for various forms of this problem. Warning - icky signal games. */
+
+static sigset_t unblock_sigsegv;
+static jmp_buf r;
+static size_t pg;
+static int devzero;
+
+static char *
+anonmap (size)
+ size_t size;
+{
+#ifdef USE_MAP_ANON
+ return (char *) mmap (0, size, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
#else
- x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
+ return (char *) mmap (0, size, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE, devzero, 0);
#endif
- if (x == (char *) -1)
- exit(2);
+}
+
+static void
+sigsegv (unused)
+ int unused;
+{
+ sigprocmask (SIG_UNBLOCK, &unblock_sigsegv, 0);
+ longjmp (r, 1);
+}
+
+/* Basic functionality test. */
+void
+test_0 ()
+{
+ char *x = anonmap (pg);
+ if (x == (char *) MAP_FAILED)
+ perror_exit("test 0 mmap", 2);
*(int *)x += 1;
if (munmap(x, pg) < 0)
- exit(3);
+ perror_exit("test 0 munmap", 3);
+}
+
+/* 1. If we map a 2-page region and unmap its second page, the first page
+ must remain. */
+static void
+test_1 ()
+{
+ char *x = anonmap (pg * 2);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 1 mmap", 4);
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 1 fault", 5);
+
+ x[0] = 1;
+ x[pg] = 1;
+
+ if (munmap (x + pg, pg) < 0)
+ perror_exit ("test 1 munmap 1", 6);
+ x[0] = 2;
+
+ if (setjmp (r) == 0)
+ {
+ x[pg] = 1;
+ perror_exit ("test 1 no fault", 7);
+ }
+ if (munmap (x, pg) < 0)
+ perror_exit ("test 1 munmap 2", 8);
+}
+
+/* 2. If we map a 2-page region and unmap its first page, the second
+ page must remain. */
+static void
+test_2 ()
+{
+ char *x = anonmap (pg * 2);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 2 mmap", 9);
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 2 fault", 10);
+
+ x[0] = 1;
+ x[pg] = 1;
+
+ if (munmap (x, pg) < 0)
+ perror_exit ("test 2 munmap 1", 11);
+
+ x[pg] = 2;
+
+ if (setjmp (r) == 0)
+ {
+ x[0] = 1;
+ perror_exit ("test 2 no fault", 12);
+ }
+
+ if (munmap (x+pg, pg) < 0)
+ perror_exit ("test 2 munmap 2", 13);
+}
+
+/* 3. If we map two adjacent 1-page regions and unmap them both with
+ one munmap, both must go away.
+
+ Getting two adjacent 1-page regions with two mmap calls is slightly
+ tricky. All OS's tested skip over already-allocated blocks; therefore
+ we have been careful to unmap all allocated regions in previous tests.
+ HP/UX allocates pages backward in memory. No OS has yet been observed
+ to be so perverse as to leave unmapped space between consecutive calls
+ to mmap. */
+
+static void
+test_3 ()
+{
+ char *x, *y, *z;
+
+ x = anonmap (pg);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 3 mmap 1", 14);
+ y = anonmap (pg);
+ if (y == (char *)MAP_FAILED)
+ perror_exit ("test 3 mmap 2", 15);
+
+ if (y != x + pg)
+ {
+ if (y == x - pg)
+ z = y, y = x, x = z;
+ else
+ {
+ fprintf (stderr, "test 3 nonconsecutive pages - %lx, %lx\n",
+ (unsigned long)x, (unsigned long)y);
+ exit (16);
+ }
+ }
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 3 fault", 17);
+
+ x[0] = 1;
+ y[0] = 1;
+
+ if (munmap (x, pg*2) < 0)
+ perror_exit ("test 3 munmap", 18);
+
+ if (setjmp (r) == 0)
+ {
+ x[0] = 1;
+ perror_exit ("test 3 no fault 1", 19);
+ }
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r) == 0)
+ {
+ y[0] = 1;
+ perror_exit ("test 3 no fault 2", 20);
+ }
+}
+
+int
+main ()
+{
+ sigemptyset (&unblock_sigsegv);
+ sigaddset (&unblock_sigsegv, SIGSEGV);
+ pg = getpagesize ();
+#ifndef USE_MAP_ANON
+ devzero = open ("/dev/zero", O_RDWR);
+ if (devzero < 0)
+ perror_exit ("open /dev/zero", 1);
+#endif
+
+ test_0();
+ test_1();
+ test_2();
+ test_3();
exit(0);
}
EOF
-if { (eval echo configure:3349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+
+echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
+echo "configure:3509: checking for working mmap from /dev/zero" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ # If this is not cygwin, and /dev/zero is a character device, it's probably
+ # safe to assume it works.
+ case "$host_os" in
+ cygwin* | win32 | pe | mingw* ) ac_cv_func_mmap_dev_zero=buggy ;;
+ * ) if test -c /dev/zero
+ then ac_cv_func_mmap_dev_zero=yes
+ else ac_cv_func_mmap_dev_zero=no
+ fi ;;
+ esac
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3525 "configure"
+#include "confdefs.h"
+#include "ct-mmap.inc"
+EOF
+if { (eval echo configure:3529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
- ac_cv_func_mmap_anywhere=yes
+ ac_cv_func_mmap_dev_zero=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_func_mmap_anywhere=no
+ if test $? -lt 4
+ then ac_cv_func_mmap_dev_zero=no
+ else ac_cv_func_mmap_dev_zero=buggy
+ fi
fi
rm -fr conftest*
fi
+
fi
-echo "$ac_t""$ac_cv_func_mmap_anywhere" 1>&6
-if test $ac_cv_func_mmap_anywhere = yes; then
+echo "$ac_t""$ac_cv_func_mmap_dev_zero" 1>&6
+if test $ac_cv_func_mmap_dev_zero = yes; then
cat >> confdefs.h <<\EOF
-#define HAVE_MMAP_ANYWHERE 1
+#define HAVE_MMAP_DEV_ZERO 1
EOF
fi
+echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
+echo "configure:3556: checking for working mmap with MAP_ANON(YMOUS)" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ # Unlike /dev/zero, it is not safe to assume MAP_ANON(YMOUS) works
+ # just because it's there. Some SCO Un*xen define it but don't implement it.
+ ac_cv_func_mmap_anon=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3566 "configure"
+#include "confdefs.h"
+#define USE_MAP_ANON
+#include "ct-mmap.inc"
+EOF
+if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_anon=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ if test $? -lt 4
+ then ac_cv_func_mmap_anon=no
+ else ac_cv_func_mmap_anon=buggy
+ fi
+fi
+rm -fr conftest*
+fi
+
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_anon" 1>&6
+if test $ac_cv_func_mmap_anon = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_ANON 1
+EOF
+
+fi
+rm -f ct-mmap.inc
+
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3372: checking for working mmap of a file" >&5
+echo "configure:3599: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 3387 "configure"
+#line 3614 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:3424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3457: checking whether $ac_func is declared" >&5
+echo "configure:3684: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3462 "configure"
+#line 3689 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3473: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3700: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3566: checking whether $ac_func is declared" >&5
+echo "configure:3793: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3571 "configure"
+#line 3798 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3629: checking if mkdir takes one argument" >&5
+echo "configure:3856: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3634 "configure"
+#line 3861 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3878: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
mkdir $tempdir
cd $tempdir
case ${srcdir} in
- /*) realsrcdir=${srcdir};;
+ /* | A-Za-z:\\/* ) realsrcdir=${srcdir};;
*) realsrcdir=../${srcdir};;
esac
CC=${CC_FOR_BUILD} ${realsrcdir}/configure \
then
echo "#define TARGET_CPU_DEFAULT ($target_cpu_default)" >>$link
fi
- if test $link = tm.h
- then
- echo "#ifndef GENERATOR_FILE" >>$link
- echo "#include \"insn-codes.h\"" >>$link
- echo "#endif" >>$link
- fi
for file in `eval echo '$'$var`; do
case $file in
echo "#define $def" >>$link
echo "#endif" >>$link
done
+
+ if test $link = tm.h
+ then
+ # Include insn-codes.h last, because it includes machmode.h,
+ # and we want EXTRA_CC_MODES to be taken into account.
+ echo "#ifndef GENERATOR_FILE" >>$link
+ echo "#include \"insn-codes.h\"" >>$link
+ echo "#endif" >>$link
+ fi
done
# Truncate the target if necessary
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:3959: checking for strerror in -lcposix" >&5
+echo "configure:4189: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3967 "configure"
+#line 4197 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:3978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4001: checking for working const" >&5
+echo "configure:4231: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4006 "configure"
+#line 4236 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4055: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4285: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:4076: checking for off_t" >&5
+echo "configure:4306: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4081 "configure"
+#line 4311 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:4109: checking for size_t" >&5
+echo "configure:4339: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4114 "configure"
+#line 4344 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4144: checking for working alloca.h" >&5
+echo "configure:4374: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4149 "configure"
+#line 4379 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4177: checking for alloca" >&5
+echo "configure:4407: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4182 "configure"
+#line 4412 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4242: checking whether alloca needs Cray hooks" >&5
+echo "configure:4472: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4247 "configure"
+#line 4477 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4272: checking for $ac_func" >&5
+echo "configure:4502: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4277 "configure"
+#line 4507 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4327: checking stack direction for C alloca" >&5
+echo "configure:4557: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4335 "configure"
+#line 4565 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4381: checking for $ac_hdr" >&5
+echo "configure:4611: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4386 "configure"
+#line 4616 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4621: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4421: checking for $ac_func" >&5
+echo "configure:4651: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4426 "configure"
+#line 4656 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4478: checking for $ac_func" >&5
+echo "configure:4708: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4483 "configure"
+#line 4713 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4540: checking for LC_MESSAGES" >&5
+echo "configure:4770: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4545 "configure"
+#line 4775 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4573: checking whether NLS is requested" >&5
+echo "configure:4803: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4593: checking whether included gettext is requested" >&5
+echo "configure:4823: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4612: checking for libintl.h" >&5
+echo "configure:4842: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4617 "configure"
+#line 4847 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4639: checking for gettext in libc" >&5
+echo "configure:4869: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4644 "configure"
+#line 4874 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4667: checking for bindtextdomain in -lintl" >&5
+echo "configure:4897: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4675 "configure"
+#line 4905 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4702: checking for gettext in libintl" >&5
+echo "configure:4932: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:4707: checking for gettext in -lintl" >&5
+echo "configure:4937: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4715 "configure"
+#line 4945 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:4726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4765: checking for $ac_word" >&5
+echo "configure:4995: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4799: checking for $ac_func" >&5
+echo "configure:5029: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4804 "configure"
+#line 5034 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4854: checking for $ac_word" >&5
+echo "configure:5084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4890: checking for $ac_word" >&5
+echo "configure:5120: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 4922 "configure"
+#line 5152 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:4955: checking whether catgets can be used" >&5
+echo "configure:5185: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:4968: checking for main in -li" >&5
+echo "configure:5198: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4976 "configure"
+#line 5206 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:5011: checking for catgets" >&5
+echo "configure:5241: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5016 "configure"
+#line 5246 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:5039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5061: checking for $ac_word" >&5
+echo "configure:5291: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5097: checking for $ac_word" >&5
+echo "configure:5327: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5134: checking for $ac_word" >&5
+echo "configure:5364: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5402: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5230: checking for $ac_word" >&5
+echo "configure:5460: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5264: checking for $ac_word" >&5
+echo "configure:5494: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5303: checking for $ac_word" >&5
+echo "configure:5533: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:5402: checking for catalogs to be installed" >&5
+echo "configure:5632: checking for catalogs to be installed" >&5
if test "x$LINGUAS" = "x"; then
LINGUAS=$ALL_LINGUAS
else
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:5434: checking for linux/version.h" >&5
+echo "configure:5664: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5439 "configure"
+#line 5669 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5444: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:5519: checking whether windows registry support is requested" >&5
+echo "configure:5749: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:5548: checking registry key on windows hosts" >&5
+echo "configure:5778: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
# Figure out what assembler we will be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:5728: checking what assembler to use" >&5
+echo "configure:5958: checking what assembler to use" >&5
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
# Figure out what nm we will be using.
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:5813: checking what nm to use" >&5
+echo "configure:6043: checking what nm to use" >&5
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
elif test x$host = x$target; then
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:5824: checking assembler alignment features" >&5
+echo "configure:6054: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:5872: checking assembler subsection support" >&5
+echo "configure:6102: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:5912: checking assembler weak support" >&5
+echo "configure:6142: checking assembler weak support" >&5
gcc_cv_as_weak=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:5935: checking assembler hidden support" >&5
+echo "configure:6165: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:5961: checking assembler .register pseudo-op support" >&5
+echo "configure:6191: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:5989: checking assembler supports -relax" >&5
+echo "configure:6219: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:6019: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:6249: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:6064: checking for assembler offsetable %lo() support" >&5
+echo "configure:6294: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:6103: checking assembler instructions" >&5
+echo "configure:6333: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:6132: checking assembler dwarf2 debug_line support" >&5
+echo "configure:6362: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# ??? Once 2.11 is released, probably need to add first known working
# version to the per-target configury.
case "$target" in
- i?86*-*-* | mips*-*-* | alpha*-*-* | sparc*-*-*)
+ i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-*)
insn="nop"
;;
ia64*-*-*)
${srcdir}/[*]/config-lang.in) ;;
*)
lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
if test "x$lang_alias" = x
then
echo "$lang doesn't set \$language." 1>&2
exit 1
fi
- if test x"${enable_languages}" = xall && test x"${lang_alias}" != xCHILL; then
- add_this_lang=yes
- else
- case "${enable_languages}" in
- ${lang_alias} | "${lang_alias},"* | *",${lang_alias},"* | *",${lang_alias}" )
- add_this_lang=yes
- ;;
- * )
- add_this_lang=no
- ;;
- esac
- fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
if test x"${add_this_lang}" = xyes; then
case $lang in
${srcdir}/ada/config-lang.in)
;;
esac
else
- if test $ac_cv_func_mmap_anywhere = yes \
- || test $ac_cv_func_valloc = yes; then
GGC=ggc-page
-else
- GGC=ggc-simple
-fi
fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6309: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6530: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
+# Find a directory in which to install a shared libgcc.
+
+# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then
+ enableval="$enable_version_specific_runtime_libs"
+ :
+fi
+
+
+# Check whether --with-slibdir or --without-slibdir was given.
+if test "${with_slibdir+set}" = set; then
+ withval="$with_slibdir"
+ slibdir="$with_slibdir"
+else
+ if test "${enable_version_specific_runtime_libs+set}" = set; then
+ slibdir='$(libsubdir)'
+elif test "$host" != "$target"; then
+ slibdir='$(build_tooldir)/lib'
+else
+ slibdir='$(libdir)'
+fi
+fi
+
+
+
# Nothing to do for FLOAT_H, float_format already handled.
objdir=`pwd`
+
# Echo that links are built
if test x$host = x$target
then
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CPP@%$CPP%g
s%@gnat@%$gnat%g
+s%@have_mktemp_command@%$have_mktemp_command%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
-s%@INSTALL_INFO@%$INSTALL_INFO%g
+s%@GENERATED_MANPAGES@%$GENERATED_MANPAGES%g
s%@FLEX@%$FLEX%g
s%@BISON@%$BISON%g
s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
s%@target_subdir@%$target_subdir%g
s%@gcc_tooldir@%$gcc_tooldir%g
s%@dollar@%$dollar%g
+s%@slibdir@%$slibdir%g
s%@objdir@%$objdir%g
s%@subdirs@%$subdirs%g
s%@all_boot_languages@%$all_boot_languages%g
s%@float_h_file@%$float_h_file%g
s%@gcc_config_arguments@%$gcc_config_arguments%g
s%@gcc_gxx_include_dir@%$gcc_gxx_include_dir%g
+s%@libstdcxx_incdir@%$libstdcxx_incdir%g
s%@gcc_version@%$gcc_version%g
s%@gcc_version_full@%$gcc_version_full%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
OSDN Git Service
