$as_unset CDPATH
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+$*
+_LT_EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
+
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_subdir host_subdir target_subdir GENINSRC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT NO_MINUS_C_MINUS_O OUTPUT_OPTION CPP EGREP strict1_warn warn_cflags WERROR nocommon_flag TREEBROWSER valgrind_path valgrind_path_defines valgrind_command coverage_flags enable_multilib enable_shared TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE CROSS_SYSTEM_HEADER_DIR onestep SET_MAKE AWK LN_S LN RANLIB ac_ct_RANLIB ranlib_flags INSTALL INSTALL_PROGRAM INSTALL_DATA make_compare_target have_mktemp_command MAKEINFO BUILD_INFO GENERATED_MANPAGES FLEX BISON NM AR stage1_cflags COLLECT2_LIBS GNAT_LIBEXC LDEXP_LIB TARGET_GETGROUPS_T LIBICONV LTLIBICONV LIBICONV_DEP manext objext gthread_flags extra_modes_file PACKAGE VERSION USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS CROSS ALL SYSTEM_HEADER_DIR inhibit_libc CC_FOR_BUILD BUILD_CFLAGS STMP_FIXINC STMP_FIXPROTO collect2 libgcc_visibility GGC zlibdir zlibinc MAINT gcc_tooldir dollar slibdir objdir subdirs srcdir all_boot_languages all_compilers all_gtfiles all_gtfiles_files_langs all_gtfiles_files_files all_lang_makefrags all_lang_makefiles all_languages all_stagestuff build_exeext build_install_headers_dir build_xm_file_list build_xm_include_list build_xm_defines check_languages cc_set_by_configure quoted_cc_set_by_configure cpp_install_dir xmake_file tmake_file extra_gcc_objs extra_headers_list extra_objs extra_parts extra_passes extra_programs float_h_file gcc_config_arguments gcc_gxx_include_dir libstdcxx_incdir gcc_version gcc_version_full gcc_version_trigger host_exeext host_xm_file_list host_xm_include_list host_xm_defines out_host_hook_obj install lang_opt_files lang_specs_files lang_tree_files local_prefix md_file objc_boehm_gc out_file out_object_file stage_prefix_set_by_configure quoted_stage_prefix_set_by_configure thread_file tm_file_list tm_include_list tm_defines tm_p_file_list tm_p_include_list xm_file_list xm_include_list xm_defines c_target_objs cxx_target_objs target_cpu_default set_gcc_lib_path GMPLIBS GMPINC LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_libsubdir build_subdir host_subdir target_subdir GENINSRC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT GNATBIND ac_ct_GNATBIND GNATMAKE ac_ct_GNATMAKE NO_MINUS_C_MINUS_O OUTPUT_OPTION CPP EGREP loose_warn strict_warn warn_cflags nocommon_flag TREEBROWSER valgrind_path valgrind_path_defines valgrind_command coverage_flags enable_multilib enable_decimal_float enable_fixed_point enable_shared TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE CROSS_SYSTEM_HEADER_DIR onestep PKGVERSION REPORT_BUGS_TO REPORT_BUGS_TEXI datarootdir docdir htmldir SET_MAKE AWK LN_S LN RANLIB ac_ct_RANLIB ranlib_flags INSTALL INSTALL_PROGRAM INSTALL_DATA make_compare_target have_mktemp_command MAKEINFO BUILD_INFO GENERATED_MANPAGES FLEX BISON NM AR COLLECT2_LIBS GNAT_LIBEXC LDEXP_LIB TARGET_GETGROUPS_T LIBICONV LTLIBICONV LIBICONV_DEP manext objext gthread_flags extra_modes_file extra_opt_files USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT CROSS ALL SYSTEM_HEADER_DIR inhibit_libc CC_FOR_BUILD BUILD_CFLAGS BUILD_LDFLAGS STMP_FIXINC STMP_FIXPROTO collect2 LIBTOOL SED FGREP GREP LD DUMPBIN ac_ct_DUMPBIN ac_ct_AR STRIP ac_ct_STRIP lt_ECHO objdir enable_fast_install gcc_cv_as ORIGINAL_AS_FOR_TARGET gcc_cv_ld ORIGINAL_LD_FOR_TARGET gcc_cv_nm ORIGINAL_NM_FOR_TARGET gcc_cv_objdump libgcc_visibility GGC zlibdir zlibinc MAINT gcc_tooldir dollar slibdir subdirs srcdir all_compilers all_gtfiles all_lang_makefrags all_lang_makefiles all_languages all_selected_languages build_exeext build_install_headers_dir build_xm_file_list build_xm_include_list build_xm_defines build_file_translate check_languages cpp_install_dir xmake_file tmake_file extra_gcc_objs extra_headers_list extra_objs extra_parts extra_passes extra_programs float_h_file gcc_config_arguments gcc_gxx_include_dir host_exeext host_xm_file_list host_xm_include_list host_xm_defines out_host_hook_obj install lang_opt_files lang_specs_files lang_tree_files local_prefix md_file objc_boehm_gc out_file out_object_file thread_file tm_file_list tm_include_list tm_defines tm_p_file_list tm_p_include_list xm_file_list xm_include_list xm_defines c_target_objs cxx_target_objs fortran_target_objs target_cpu_default GMPLIBS GMPINC PPLLIBS PPLINC CLOOGLIBS CLOOGINC LIBOBJS LTLIBOBJS'
ac_subst_files='language_hooks'
+ac_pwd=`pwd`
# Initialize some variables set by options.
ac_init_help=
ac_env_GMPINC_value=$GMPINC
ac_cv_env_GMPINC_set=${GMPINC+set}
ac_cv_env_GMPINC_value=$GMPINC
+ac_env_PPLLIBS_set=${PPLLIBS+set}
+ac_env_PPLLIBS_value=$PPLLIBS
+ac_cv_env_PPLLIBS_set=${PPLLIBS+set}
+ac_cv_env_PPLLIBS_value=$PPLLIBS
+ac_env_PPLINC_set=${PPLINC+set}
+ac_env_PPLINC_value=$PPLINC
+ac_cv_env_PPLINC_set=${PPLINC+set}
+ac_cv_env_PPLINC_value=$PPLINC
+ac_env_CLOOGLIBS_set=${CLOOGLIBS+set}
+ac_env_CLOOGLIBS_value=$CLOOGLIBS
+ac_cv_env_CLOOGLIBS_set=${CLOOGLIBS+set}
+ac_cv_env_CLOOGLIBS_value=$CLOOGLIBS
+ac_env_CLOOGINC_set=${CLOOGINC+set}
+ac_env_CLOOGINC_value=$CLOOGINC
+ac_cv_env_CLOOGINC_set=${CLOOGINC+set}
+ac_cv_env_CLOOGINC_value=$CLOOGINC
#
# Report the --help message.
put copies of generated files in source dir
intended for creating source tarballs for users
without texinfo bison or flex.
- --enable-werror-always enable -Werror always
- --enable-werror enable -Werror in bootstrap stage2 and later
+ --enable-werror-always enable -Werror despite compiler version
--enable-checking=LIST
enable expensive run-time checks. With LIST,
enable only specific categories of checks.
- Categories are: assert,fold,gc,gcac,misc,
- rtlflag,rtl,tree,valgrind,release,yes,all;
- --enable-mapped-location location_t is fileline integer cookie
+ Categories are: yes,no,all,none,release.
+ Flags are: assert,df,fold,gc,gcac,gimple,misc,
+ rtlflag,rtl,runtime,tree,valgrind,types.
--enable-coverage=LEVEL
enable compiler's code coverage collection.
Use to measure compiler performance and locate
--enable-gather-detailed-mem-stats enable detailed memory allocation stats gathering
--enable-multilib enable library support for multiple ABIs
--enable-__cxa_atexit enable __cxa_atexit for C++
+ --enable-decimal-float={no,yes,bid,dpd}
+ enable decimal float extension to C. Selecting 'bid'
+ or 'dpd' choses which decimal floating point format
+ to use
+ --enable-fixed-point enable fixed-point arithmetic extension to C
--enable-threads enable thread usage for target GCC
--enable-threads=LIB use LIB thread package for target GCC
+ --enable-tls enable or disable generation of tls code
+ overriding the assembler check for tls support
--enable-objc-gc enable the use of Boehm's garbage collector with
the GNU Objective-C runtime
--disable-shared don't provide a shared libgcc
--enable-initfini-array use .init_array/.fini_array sections
--enable-sjlj-exceptions
arrange to use setjmp/longjmp exception handling
+ --enable-secureplt enable -msecure-plt by default for PowerPC
+ --enable-cld enable -mcld by default for 32bit x86
--disable-win32-registry
disable lookup of installation paths in the
Registry on Windows hosts
--enable-win32-registry=KEY
use KEY instead of GCC version as the last portion
of the registry key
+ --enable-shared[=PKGS]
+ build shared libraries [default=yes]
+ --enable-static[=PKGS]
+ build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode
enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-build-libsubdir=DIR Directory where to find libraries for build system
--with-local-prefix=DIR specifies directory to put local include
--with-gxx-include-dir=DIR
specifies directory to put g++ header files
--with-as arrange to use the specified as (full pathname)
--with-stabs arrange to use stabs instead of host debug format
--with-dwarf2 force the default debug format to be DWARF 2
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build
--with-sysroot=DIR Search for usr/lib, usr/include, et al, within DIR.
+ --with-pkgversion=PKG Use PKG in the version string in place of "GCC"
+ --with-bugurl=URL Direct users to URL to report a bug
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
--with-system-libunwind use installed libunwind
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-long-double-128 Use 128-bit long double by default.
--with-gc={page,zone} choose the garbage collection mechanism to use
with the compiler
--with-system-zlib use installed libz
- --with-slibdir=DIR shared libraries in DIR LIBDIR
+ --with-slibdir=DIR shared libraries in DIR [LIBDIR]
+ --with-datarootdir=DIR Use DIR as the data root [PREFIX/share]
+ --with-docdir=DIR Install documentation in DIR [DATAROOTDIR]
+ --with-htmldir=DIR html documentation in in DIR [DOCDIR]
Some influential environment variables:
CC C compiler command
CPP C preprocessor
GMPLIBS How to link GMP
GMPINC How to find GMP include files
+ PPLLIBS How to link PPL
+ PPLINC How to find PPL include files
+ CLOOGLIBS How to link CLOOG
+ CLOOGINC How to find CLOOG include files
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ ac_cache_corrupted=:
+ else
+ { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
fi
done
if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
{ { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+
+
+
ac_config_headers="$ac_config_headers auto-host.h:config.in"
-#Set to 1 on a release branch
-is_release=
+gcc_version=`cat $srcdir/BASE-VER`
# Determine the host, build, and target systems
ac_aux_dir=
# Determine the target- and build-specific subdirectories
- # Prefix 'build-' so this never conflicts with target_subdir.
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+
+# Check whether --with-build-libsubdir or --without-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then
+ withval="$with_build_libsubdir"
+ build_libsubdir="$withval"
+else
+ build_libsubdir="$build_subdir"
+fi;
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
esac
fi;
+# This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
if test x${gcc_gxx_include_dir} = x; then
if test x${enable_version_specific_runtime_libs} = xyes; then
gcc_gxx_include_dir='${libsubdir}/include/c++'
else
- topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
+ libstdcxx_incdir='include/c++/$(version)'
+ if test x$host != x$target; then
+ libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
+ fi
+ gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
fi
fi
fi
+gnu_ld=`if test x"$gnu_ld_flag" = x"yes"; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GNU_LD $gnu_ld
+_ACEOF
+
+
echo "$as_me:$LINENO: checking whether a default linker was specified" >&5
echo $ECHO_N "checking whether a default linker was specified... $ECHO_C" >&6
if test x"${DEFAULT_LINKER+set}" = x"set"; then
fi
+gnu_as=`if test x"$gas_flag" = x"yes"; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GNU_AS $gnu_as
+_ACEOF
+
+
echo "$as_me:$LINENO: checking whether a default assembler was specified" >&5
echo $ECHO_N "checking whether a default assembler was specified... $ECHO_C" >&6
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
# Provide some information about the compiler.
echo "$as_me:$LINENO:" \
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
See \`config.log' for more details." >&5
echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+ { (exit 77); exit 77; }; }; }
fi
ac_exeext=$ac_cv_exeext
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
fi
fi
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest$ac_cv_exeext
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
CC="$am_aux_dir/compile $CC"
fi
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+GNATBIND=$ac_cv_prog_GNATBIND
+if test -n "$GNATBIND"; then
+ echo "$as_me:$LINENO: result: $GNATBIND" >&5
+echo "${ECHO_T}$GNATBIND" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_GNATBIND"; then
+ ac_ct_GNATBIND=$GNATBIND
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_GNATBIND"; then
+ ac_cv_prog_ac_ct_GNATBIND="$ac_ct_GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATBIND="gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_GNATBIND" && ac_cv_prog_ac_ct_GNATBIND="no"
+fi
+fi
+ac_ct_GNATBIND=$ac_cv_prog_ac_ct_GNATBIND
+if test -n "$ac_ct_GNATBIND"; then
+ echo "$as_me:$LINENO: result: $ac_ct_GNATBIND" >&5
+echo "${ECHO_T}$ac_ct_GNATBIND" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ GNATBIND=$ac_ct_GNATBIND
+else
+ GNATBIND="$ac_cv_prog_GNATBIND"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatmake", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatmake; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GNATMAKE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GNATMAKE"; then
+ ac_cv_prog_GNATMAKE="$GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATMAKE="${ac_tool_prefix}gnatmake"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+GNATMAKE=$ac_cv_prog_GNATMAKE
+if test -n "$GNATMAKE"; then
+ echo "$as_me:$LINENO: result: $GNATMAKE" >&5
+echo "${ECHO_T}$GNATMAKE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_GNATMAKE"; then
+ ac_ct_GNATMAKE=$GNATMAKE
+ # Extract the first word of "gnatmake", so it can be a program name with args.
+set dummy gnatmake; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_GNATMAKE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_GNATMAKE"; then
+ ac_cv_prog_ac_ct_GNATMAKE="$ac_ct_GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATMAKE="gnatmake"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_GNATMAKE" && ac_cv_prog_ac_ct_GNATMAKE="no"
+fi
+fi
+ac_ct_GNATMAKE=$ac_cv_prog_ac_ct_GNATMAKE
+if test -n "$ac_ct_GNATMAKE"; then
+ echo "$as_me:$LINENO: result: $ac_ct_GNATMAKE" >&5
+echo "${ECHO_T}$ac_ct_GNATMAKE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ GNATMAKE=$ac_ct_GNATMAKE
+else
+ GNATMAKE="$ac_cv_prog_GNATMAKE"
+fi
+
+echo "$as_me:$LINENO: checking whether compiler driver understands Ada" >&5
+echo $ECHO_N "checking whether compiler driver understands Ada... $ECHO_C" >&6
+if test "${acx_cv_cc_gcc_supports_ada+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+acx_cv_cc_gcc_supports_ada=no
+# There is a bug in old released versions of GCC which causes the
+# driver to exit successfully when the appropriate language module
+# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+# Therefore we must check for the error message as well as an
+# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
+errors=`(${CC} -I"$srcdir"/ada -c conftest.adb) 2>&1 || echo failure`
+if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_cc_gcc_supports_ada=yes
+fi
+rm -f conftest.*
+fi
+echo "$as_me:$LINENO: result: $acx_cv_cc_gcc_supports_ada" >&5
+echo "${ECHO_T}$acx_cv_cc_gcc_supports_ada" >&6
+
+if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
+
+
# autoconf is lame and doesn't give us any substitution variable for this.
if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
NO_MINUS_C_MINUS_O=yes
+# Remove the -O2: for historical reasons, unless bootstrapping we prefer
+# optimizations to be activated explicitly by the toplevel.
+case "$CC" in
+ */prev-gcc/xgcc*) ;;
+ *) CFLAGS=`echo $CFLAGS | sed "s/-O[s0-9]* *//" ` ;;
+esac
+
+
# -------------------------
# Check C compiler features
# -------------------------
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
if $ac_preproc_ok; then
:
else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&5
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
ac_ext=c
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking for inline" >&5
-echo $ECHO_N "checking for inline... $ECHO_C" >&6
-if test "${ac_cv_c_inline+set}" = set; then
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_c_inline=$ac_kw; break
+ ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-echo "${ECHO_T}$ac_cv_c_inline" >&6
-
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-
-echo "$as_me:$LINENO: checking for long long int" >&5
-echo $ECHO_N "checking for long long int... $ECHO_C" >&6
-if test "${ac_cv_c_long_long+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-long long int i;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_long_long=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_long_long=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_long_long" >&5
-echo "${ECHO_T}$ac_cv_c_long_long" >&6
- if test $ac_cv_c_long_long = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LONG_LONG 1
-_ACEOF
-
- fi
-echo "$as_me:$LINENO: checking for __int64" >&5
-echo $ECHO_N "checking for __int64... $ECHO_C" >&6
-if test "${ac_cv_c___int64+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-__int64 i;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c___int64=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c___int64=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c___int64" >&5
-echo "${ECHO_T}$ac_cv_c___int64" >&6
- if test $ac_cv_c___int64 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___INT64 1
-_ACEOF
-
- fi
-
-
-# sizeof(char) is 1 by definition.
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
+ac_cv_header_stdc=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
-echo "$as_me:$LINENO: checking for void *" >&5
-echo $ECHO_N "checking for void *... $ECHO_C" >&6
-if test "${ac_cv_type_void_p+set}" = set; then
+
+ if test "${ac_cv_header_minix_config_h+set}" = set; then
+ echo "$as_me:$LINENO: checking for minix/config.h" >&5
+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
+if test "${ac_cv_header_minix_config_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking minix/config.h usability" >&5
+echo $ECHO_N "checking minix/config.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-int
-main ()
-{
-if ((void * *) 0)
- return 0;
-if (sizeof (void *))
- return 0;
- ;
- return 0;
-}
+#include <minix/config.h>
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type_void_p=yes
+ ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_void_p=no
+ac_header_compiler=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5
-echo "${ECHO_T}$ac_cv_type_void_p" >&6
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
-echo "$as_me:$LINENO: checking size of void *" >&5
-echo $ECHO_N "checking size of void *... $ECHO_C" >&6
-if test "${ac_cv_sizeof_void_p+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$ac_cv_type_void_p" = yes; then
- # The cast to unsigned long works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
+# Is the header present?
+echo "$as_me:$LINENO: checking minix/config.h presence" >&5
+echo $ECHO_N "checking minix/config.h presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
+#include <minix/config.h>
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists. ##
+## ------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for minix/config.h" >&5
+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
+if test "${ac_cv_header_minix_config_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_minix_config_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
+
+fi
+if test $ac_cv_header_minix_config_h = yes; then
+ MINIX=yes
+else
+ MINIX=
+fi
+
+
+ if test "$MINIX" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define _POSIX_SOURCE 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define _POSIX_1_SOURCE 2
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define _MINIX 1
+_ACEOF
+
+ fi
+
+
+
+ echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5
+echo $ECHO_N "checking whether it is safe to define __EXTENSIONS__... $ECHO_C" >&6
+if test "${ac_cv_safe_to_define___extensions__+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
-test_array [0] = 0
;
return 0;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
+ ac_cv_safe_to_define___extensions__=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
+ac_cv_safe_to_define___extensions__=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+fi
+echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5
+echo "${ECHO_T}$ac_cv_safe_to_define___extensions__" >&6
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ cat >>confdefs.h <<\_ACEOF
+#define __EXTENSIONS__ 1
+_ACEOF
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+ cat >>confdefs.h <<\_ACEOF
+#define _ALL_SOURCE 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)];
-test_array [0] = 0
- ;
- return 0;
-}
+ cat >>confdefs.h <<\_ACEOF
+#define _GNU_SOURCE 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
+
+ cat >>confdefs.h <<\_ACEOF
+#define _POSIX_PTHREAD_SEMANTICS 1
+_ACEOF
+
+ cat >>confdefs.h <<\_ACEOF
+#define _TANDEM_SOURCE 1
+_ACEOF
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+ ac_cpp_err=yes
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
+if test -z "$ac_cpp_err"; then
+ :
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ # Broken: fails on valid input.
+continue
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
+#include <ac_nonexistent.h>
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
+ # Passes both tests.
+ac_preproc_ok=:
+break
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
+
done
-case $ac_lo in
-?*) ac_cv_sizeof_void_p=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (void *), 77
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-else
- if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
-long longval () { return (long) (sizeof (void *)); }
-unsigned long ulongval () { return (long) (sizeof (void *)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- exit (1);
- if (((long) (sizeof (void *))) < 0)
- {
- long i = longval ();
- if (i != ((long) (sizeof (void *))))
- exit (1);
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long i = ulongval ();
- if (i != ((long) (sizeof (void *))))
- exit (1);
- fprintf (f, "%lu\n", i);
- }
- exit (ferror (f) || fclose (f) != 0);
-
- ;
- return 0;
-}
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_void_p=`cat conftest.val`
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (void *), 77
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ # Broken: fails on valid input.
+continue
fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest.val
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
else
- ac_cv_sizeof_void_p=0
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }; }
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5
-echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
-_ACEOF
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking for short" >&5
-echo $ECHO_N "checking for short... $ECHO_C" >&6
-if test "${ac_cv_type_short+set}" = set; then
+echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6
+if test "${ac_cv_c_inline+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if ((short *) 0)
- return 0;
-if (sizeof (short))
- return 0;
- ;
- return 0;
-}
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type_short=yes
+ ac_cv_c_inline=$ac_kw; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_short=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5
-echo "${ECHO_T}$ac_cv_type_short" >&6
+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6
-echo "$as_me:$LINENO: checking size of short" >&5
-echo $ECHO_N "checking size of short... $ECHO_C" >&6
-if test "${ac_cv_sizeof_short+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$ac_cv_type_short" = yes; then
- # The cast to unsigned long works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+
+# sizeof(char) is 1 by definition.
+echo "$as_me:$LINENO: checking for void *" >&5
+echo $ECHO_N "checking for void *... $ECHO_C" >&6
+if test "${ac_cv_type_void_p+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)];
+if ((void * *) 0)
+ return 0;
+if (sizeof (void *))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_void_p=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_void_p=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5
+echo "${ECHO_T}$ac_cv_type_void_p" >&6
+
+echo "$as_me:$LINENO: checking size of void *" >&5
+echo $ECHO_N "checking size of void *... $ECHO_C" >&6
+if test "${ac_cv_sizeof_void_p+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_void_p" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
test_array [0] = 0
;
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
-?*) ac_cv_sizeof_short=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+?*) ac_cv_sizeof_void_p=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short), 77
+echo "$as_me: error: cannot compute sizeof (void *), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 1); exit 1; }; }; } ;;
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (short)); }
-unsigned long ulongval () { return (long) (sizeof (short)); }
+long longval () { return (long) (sizeof (void *)); }
+unsigned long ulongval () { return (long) (sizeof (void *)); }
#include <stdio.h>
#include <stdlib.h>
int
FILE *f = fopen ("conftest.val", "w");
if (! f)
exit (1);
- if (((long) (sizeof (short))) < 0)
+ if (((long) (sizeof (void *))) < 0)
{
long i = longval ();
- if (i != ((long) (sizeof (short))))
+ if (i != ((long) (sizeof (void *))))
exit (1);
fprintf (f, "%ld\n", i);
}
else
{
unsigned long i = ulongval ();
- if (i != ((long) (sizeof (short))))
+ if (i != ((long) (sizeof (void *))))
exit (1);
fprintf (f, "%lu\n", i);
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_sizeof_short=`cat conftest.val`
+ ac_cv_sizeof_void_p=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short), 77
+echo "$as_me: error: cannot compute sizeof (void *), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
else
- ac_cv_sizeof_short=0
+ ac_cv_sizeof_void_p=0
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
-echo "${ECHO_T}$ac_cv_sizeof_short" >&6
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5
+echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6
cat >>confdefs.h <<_ACEOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
_ACEOF
-echo "$as_me:$LINENO: checking for int" >&5
-echo $ECHO_N "checking for int... $ECHO_C" >&6
-if test "${ac_cv_type_int+set}" = set; then
+echo "$as_me:$LINENO: checking for short" >&5
+echo $ECHO_N "checking for short... $ECHO_C" >&6
+if test "${ac_cv_type_short+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
int
main ()
{
-if ((int *) 0)
+if ((short *) 0)
return 0;
-if (sizeof (int))
+if (sizeof (short))
return 0;
;
return 0;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type_int=yes
+ ac_cv_type_short=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_int=no
+ac_cv_type_short=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
-echo "${ECHO_T}$ac_cv_type_int" >&6
+echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5
+echo "${ECHO_T}$ac_cv_type_short" >&6
-echo "$as_me:$LINENO: checking size of int" >&5
-echo $ECHO_N "checking size of int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_int+set}" = set; then
+echo "$as_me:$LINENO: checking size of short" >&5
+echo $ECHO_N "checking size of short... $ECHO_C" >&6
+if test "${ac_cv_sizeof_short+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "$ac_cv_type_int" = yes; then
+ if test "$ac_cv_type_short" = yes; then
# The cast to unsigned long works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
test_array [0] = 0
;
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
-?*) ac_cv_sizeof_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+?*) ac_cv_sizeof_short=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
+echo "$as_me: error: cannot compute sizeof (short), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 1); exit 1; }; }; } ;;
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (int)); }
-unsigned long ulongval () { return (long) (sizeof (int)); }
+long longval () { return (long) (sizeof (short)); }
+unsigned long ulongval () { return (long) (sizeof (short)); }
#include <stdio.h>
#include <stdlib.h>
int
FILE *f = fopen ("conftest.val", "w");
if (! f)
exit (1);
- if (((long) (sizeof (int))) < 0)
+ if (((long) (sizeof (short))) < 0)
{
long i = longval ();
- if (i != ((long) (sizeof (int))))
+ if (i != ((long) (sizeof (short))))
exit (1);
fprintf (f, "%ld\n", i);
}
else
{
unsigned long i = ulongval ();
- if (i != ((long) (sizeof (int))))
+ if (i != ((long) (sizeof (short))))
exit (1);
fprintf (f, "%lu\n", i);
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_sizeof_int=`cat conftest.val`
+ ac_cv_sizeof_short=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
+echo "$as_me: error: cannot compute sizeof (short), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
else
- ac_cv_sizeof_int=0
+ ac_cv_sizeof_short=0
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_int" >&6
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
+echo "${ECHO_T}$ac_cv_sizeof_short" >&6
cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT $ac_cv_sizeof_int
+#define SIZEOF_SHORT $ac_cv_sizeof_short
_ACEOF
-echo "$as_me:$LINENO: checking for long" >&5
-echo $ECHO_N "checking for long... $ECHO_C" >&6
-if test "${ac_cv_type_long+set}" = set; then
+echo "$as_me:$LINENO: checking for int" >&5
+echo $ECHO_N "checking for int... $ECHO_C" >&6
+if test "${ac_cv_type_int+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
int
main ()
{
-if ((long *) 0)
+if ((int *) 0)
return 0;
-if (sizeof (long))
+if (sizeof (int))
return 0;
;
return 0;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type_long=yes
+ ac_cv_type_int=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_long=no
+ac_cv_type_int=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
-echo "${ECHO_T}$ac_cv_type_long" >&6
+echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
+echo "${ECHO_T}$ac_cv_type_int" >&6
-echo "$as_me:$LINENO: checking size of long" >&5
-echo $ECHO_N "checking size of long... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long+set}" = set; then
+echo "$as_me:$LINENO: checking size of int" >&5
+echo $ECHO_N "checking size of int... $ECHO_C" >&6
+if test "${ac_cv_sizeof_int+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "$ac_cv_type_long" = yes; then
+ if test "$ac_cv_type_int" = yes; then
# The cast to unsigned long works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
test_array [0] = 0
;
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
-?*) ac_cv_sizeof_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+?*) ac_cv_sizeof_int=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long), 77
+echo "$as_me: error: cannot compute sizeof (int), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 1); exit 1; }; }; } ;;
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (long)); }
-unsigned long ulongval () { return (long) (sizeof (long)); }
+long longval () { return (long) (sizeof (int)); }
+unsigned long ulongval () { return (long) (sizeof (int)); }
#include <stdio.h>
#include <stdlib.h>
int
FILE *f = fopen ("conftest.val", "w");
if (! f)
exit (1);
- if (((long) (sizeof (long))) < 0)
+ if (((long) (sizeof (int))) < 0)
{
long i = longval ();
- if (i != ((long) (sizeof (long))))
+ if (i != ((long) (sizeof (int))))
exit (1);
fprintf (f, "%ld\n", i);
}
else
{
unsigned long i = ulongval ();
- if (i != ((long) (sizeof (long))))
+ if (i != ((long) (sizeof (int))))
exit (1);
fprintf (f, "%lu\n", i);
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_sizeof_long=`cat conftest.val`
+ ac_cv_sizeof_int=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long), 77
+echo "$as_me: error: cannot compute sizeof (int), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
else
- ac_cv_sizeof_long=0
+ ac_cv_sizeof_int=0
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long" >&6
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_int" >&6
cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
+#define SIZEOF_INT $ac_cv_sizeof_int
_ACEOF
-if test $ac_cv_c_long_long = yes; then
- echo "$as_me:$LINENO: checking for long long" >&5
-echo $ECHO_N "checking for long long... $ECHO_C" >&6
-if test "${ac_cv_type_long_long+set}" = set; then
+echo "$as_me:$LINENO: checking for long" >&5
+echo $ECHO_N "checking for long... $ECHO_C" >&6
+if test "${ac_cv_type_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
int
main ()
{
-if ((long long *) 0)
+if ((long *) 0)
return 0;
-if (sizeof (long long))
+if (sizeof (long))
return 0;
;
return 0;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type_long_long=yes
+ ac_cv_type_long=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_long_long=no
+ac_cv_type_long=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5
-echo "${ECHO_T}$ac_cv_type_long_long" >&6
+echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
+echo "${ECHO_T}$ac_cv_type_long" >&6
-echo "$as_me:$LINENO: checking size of long long" >&5
-echo $ECHO_N "checking size of long long... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long_long+set}" = set; then
+echo "$as_me:$LINENO: checking size of long" >&5
+echo $ECHO_N "checking size of long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "$ac_cv_type_long_long" = yes; then
+ if test "$ac_cv_type_long" = yes; then
# The cast to unsigned long works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long long))) < 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
test_array [0] = 0
;
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
-?*) ac_cv_sizeof_long_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
+?*) ac_cv_sizeof_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long), 77
+echo "$as_me: error: cannot compute sizeof (long), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 1); exit 1; }; }; } ;;
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (long long)); }
-unsigned long ulongval () { return (long) (sizeof (long long)); }
+long longval () { return (long) (sizeof (long)); }
+unsigned long ulongval () { return (long) (sizeof (long)); }
#include <stdio.h>
#include <stdlib.h>
int
FILE *f = fopen ("conftest.val", "w");
if (! f)
exit (1);
- if (((long) (sizeof (long long))) < 0)
+ if (((long) (sizeof (long))) < 0)
{
long i = longval ();
- if (i != ((long) (sizeof (long long))))
+ if (i != ((long) (sizeof (long))))
exit (1);
fprintf (f, "%ld\n", i);
}
else
{
unsigned long i = ulongval ();
- if (i != ((long) (sizeof (long long))))
+ if (i != ((long) (sizeof (long))))
exit (1);
fprintf (f, "%lu\n", i);
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_sizeof_long_long=`cat conftest.val`
+ ac_cv_sizeof_long=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long), 77
+echo "$as_me: error: cannot compute sizeof (long), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
else
- ac_cv_sizeof_long_long=0
+ ac_cv_sizeof_long=0
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_long" >&6
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long" >&6
cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+#define SIZEOF_LONG $ac_cv_sizeof_long
_ACEOF
+echo "$as_me:$LINENO: checking for long long" >&5
+echo $ECHO_N "checking for long long... $ECHO_C" >&6
+if test "${ac_cv_type_long_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long long *) 0)
+ return 0;
+if (sizeof (long long))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long_long=no
fi
-if test $ac_cv_c___int64 = yes; then
- echo "$as_me:$LINENO: checking for __int64" >&5
-echo $ECHO_N "checking for __int64... $ECHO_C" >&6
-if test "${ac_cv_type___int64+set}" = set; then
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5
+echo "${ECHO_T}$ac_cv_type_long_long" >&6
+if test $ac_cv_type_long_long = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LONG_LONG 1
+_ACEOF
+
+echo "$as_me:$LINENO: checking for long long" >&5
+echo $ECHO_N "checking for long long... $ECHO_C" >&6
+if test "${ac_cv_type_long_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
int
main ()
{
-if ((__int64 *) 0)
+if ((long long *) 0)
return 0;
-if (sizeof (__int64))
+if (sizeof (long long))
return 0;
;
return 0;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_type___int64=yes
+ ac_cv_type_long_long=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type___int64=no
+ac_cv_type_long_long=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type___int64" >&5
-echo "${ECHO_T}$ac_cv_type___int64" >&6
+echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5
+echo "${ECHO_T}$ac_cv_type_long_long" >&6
-echo "$as_me:$LINENO: checking size of __int64" >&5
-echo $ECHO_N "checking size of __int64... $ECHO_C" >&6
-if test "${ac_cv_sizeof___int64+set}" = set; then
+echo "$as_me:$LINENO: checking size of long long" >&5
+echo $ECHO_N "checking size of long long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "$ac_cv_type___int64" = yes; then
+ if test "$ac_cv_type_long_long" = yes; then
# The cast to unsigned long works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) < 0)];
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) < 0)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= $ac_mid)];
test_array [0] = 0
;
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
test_array [0] = 0
;
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
-?*) ac_cv_sizeof___int64=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77
+?*) ac_cv_sizeof_long_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (__int64), 77
+echo "$as_me: error: cannot compute sizeof (long long), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 1); exit 1; }; }; } ;;
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (__int64)); }
-unsigned long ulongval () { return (long) (sizeof (__int64)); }
+long longval () { return (long) (sizeof (long long)); }
+unsigned long ulongval () { return (long) (sizeof (long long)); }
#include <stdio.h>
#include <stdlib.h>
int
FILE *f = fopen ("conftest.val", "w");
if (! f)
exit (1);
- if (((long) (sizeof (__int64))) < 0)
+ if (((long) (sizeof (long long))) < 0)
{
long i = longval ();
- if (i != ((long) (sizeof (__int64))))
+ if (i != ((long) (sizeof (long long))))
exit (1);
fprintf (f, "%ld\n", i);
}
else
{
unsigned long i = ulongval ();
- if (i != ((long) (sizeof (__int64))))
+ if (i != ((long) (sizeof (long long))))
exit (1);
fprintf (f, "%lu\n", i);
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_sizeof___int64=`cat conftest.val`
+ ac_cv_sizeof_long_long=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (__int64), 77
+echo "$as_me: error: cannot compute sizeof (long long), 77
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
else
- ac_cv_sizeof___int64=0
+ ac_cv_sizeof_long_long=0
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof___int64" >&5
-echo "${ECHO_T}$ac_cv_sizeof___int64" >&6
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long_long" >&6
cat >>confdefs.h <<_ACEOF
-#define SIZEOF___INT64 $ac_cv_sizeof___int64
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
_ACEOF
fi
-# ---------------------
-# Warnings and checking
-# ---------------------
-
-# Check $CC warning features (if it's GCC).
-# We want to use -pedantic, but we don't want warnings about
-# * 'long long'
-# * variadic macros
-# So, we only use -pedantic if we can disable those warnings.
-
-echo "$as_me:$LINENO: checking whether ${CC} accepts -Wno-long-long" >&5
-echo $ECHO_N "checking whether ${CC} accepts -Wno-long-long... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_w_no_long_long+set}" = set; then
+echo "$as_me:$LINENO: checking for __int64" >&5
+echo $ECHO_N "checking for __int64... $ECHO_C" >&6
+if test "${ac_cv_type___int64+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- save_CFLAGS="$CFLAGS"
- CFLAGS="-Wno-long-long"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
+$ac_includes_default
+int
+main ()
+{
+if ((__int64 *) 0)
+ return 0;
+if (sizeof (__int64))
+ return 0;
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_prog_cc_w_no_long_long=yes
+ ac_cv_type___int64=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_prog_cc_w_no_long_long=no
+ac_cv_type___int64=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$save_CFLAGS"
-
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_w_no_long_long" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_w_no_long_long" >&6
+echo "$as_me:$LINENO: result: $ac_cv_type___int64" >&5
+echo "${ECHO_T}$ac_cv_type___int64" >&6
+if test $ac_cv_type___int64 = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE___INT64 1
+_ACEOF
-echo "$as_me:$LINENO: checking whether ${CC} accepts -Wno-variadic-macros" >&5
-echo $ECHO_N "checking whether ${CC} accepts -Wno-variadic-macros... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_w_no_variadic_macros+set}" = set; then
+echo "$as_me:$LINENO: checking for __int64" >&5
+echo $ECHO_N "checking for __int64... $ECHO_C" >&6
+if test "${ac_cv_type___int64+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- save_CFLAGS="$CFLAGS"
- CFLAGS="-Wno-variadic-macros"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
+$ac_includes_default
+int
+main ()
+{
+if ((__int64 *) 0)
+ return 0;
+if (sizeof (__int64))
+ return 0;
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_prog_cc_w_no_variadic_macros=yes
+ ac_cv_type___int64=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_prog_cc_w_no_variadic_macros=no
+ac_cv_type___int64=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_w_no_variadic_macros" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_w_no_variadic_macros" >&6
-
-strict1_warn=
-if test $ac_cv_prog_cc_w_no_long_long = yes \
- && test $ac_cv_prog_cc_w_no_variadic_macros = yes ; then
- strict1_warn="-pedantic -Wno-long-long -Wno-variadic-macros"
fi
+echo "$as_me:$LINENO: result: $ac_cv_type___int64" >&5
+echo "${ECHO_T}$ac_cv_type___int64" >&6
-
-# Add -Wold-style-definition if it's accepted
-echo "$as_me:$LINENO: checking whether ${CC} accepts -Wold-style-definition" >&5
-echo $ECHO_N "checking whether ${CC} accepts -Wold-style-definition... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_w_old_style_definition+set}" = set; then
+echo "$as_me:$LINENO: checking size of __int64" >&5
+echo $ECHO_N "checking size of __int64... $ECHO_C" >&6
+if test "${ac_cv_sizeof___int64+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- save_CFLAGS="$CFLAGS"
- CFLAGS="-Wold-style-definition"
- cat >conftest.$ac_ext <<_ACEOF
+ if test "$ac_cv_type___int64" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= 0)];
+test_array [0] = 0
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_prog_cc_w_old_style_definition=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_w_old_style_definition=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_w_old_style_definition" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_w_old_style_definition" >&6
-if test $ac_cv_prog_cc_w_old_style_definition = yes ; then
- strict1_warn="${strict1_warn} -Wold-style-definition"
-fi
-
-# Enable -Werror, period.
-# Check whether --enable-werror_always or --disable-werror_always was given.
-if test "${enable_werror_always+set}" = set; then
- enableval="$enable_werror_always"
-
-else
- enable_werror_always=no
-fi;
-if test x${enable_werror_always} = xyes ; then
- strict1_warn="${strict1_warn} -Werror"
- WERROR=-Werror
-fi
-
-# If the native compiler is GCC, we can enable warnings even in stage1.
-# That's useful for people building cross-compilers, or just running a
-# quick `make'.
-warn_cflags=
-if test "x$GCC" = "xyes"; then
- warn_cflags='$(GCC_WARN_CFLAGS)'
-fi
-
-
-# Enable -Werror in bootstrap stage2 and later.
-# Check whether --enable-werror or --disable-werror was given.
-if test "${enable_werror+set}" = set; then
- enableval="$enable_werror"
-
-else
- if test x$is_release = x ; then
- # Default to "yes" on development branches.
- enable_werror=yes
-else
- # Default to "no" on release branches.
- enable_werror=no
-fi
-fi;
-if test x$enable_werror = xyes ; then
- WERROR=-Werror
-fi
-
-
-# Enable expensive internal checks
-# Check whether --enable-checking or --disable-checking was given.
-if test "${enable_checking+set}" = set; then
- enableval="$enable_checking"
- ac_checking_flags="${enableval}"
-else
-
-# Determine the default checks.
-if test x$is_release = x ; then
- ac_checking_flags=yes
-else
- ac_checking_flags=release
-fi
-fi;
-ac_assert_checking=1
-ac_checking=
-ac_tree_checking=
-ac_rtl_checking=
-ac_rtlflag_checking=
-ac_gc_checking=
-ac_gc_always_collect=
-ac_fold_checking=
-IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
-for check in $ac_checking_flags
-do
- case $check in
- yes) ac_assert_checking=1 ; ac_checking=1 ;
- ac_tree_checking=1 ; ac_gc_checking=1 ;
- ac_rtlflag_checking=1 ;;
- no) ac_assert_checking= ; ac_checking= ;
- ac_tree_checking= ; ac_rtl_checking= ;
- ac_rtlflag_checking= ; ac_gc_checking= ;
- ac_gc_always_collect= ; ac_fold_checking= ;;
- all) ac_assert_checking=1 ; ac_checking=1 ;
- ac_tree_checking=1 ; ac_rtl_checking=1 ;
- ac_rtlflag_checking=1 ; ac_gc_checking=1 ;
- ac_gc_always_collect=1 ; ac_fold_checking=1 ;;
- release) ac_assert_checking=1 ;;
- assert) ac_assert_checking=1 ;;
- fold) ac_fold_checking=1 ;;
- gc) ac_gc_checking=1 ;;
- gcac) ac_gc_always_collect=1 ;;
- misc) ac_checking=1 ;;
- rtlflag) ac_rtlflag_checking=1 ;;
- rtl) ac_rtl_checking=1 ;;
- tree) ac_tree_checking=1 ;;
- valgrind) ac_checking_valgrind=1 ;;
- *) { { echo "$as_me:$LINENO: error: unknown check category $check" >&5
-echo "$as_me: error: unknown check category $check" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
-done
-IFS="$ac_save_IFS"
-
-nocommon_flag=""
-if test x$ac_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_CHECKING 1
-_ACEOF
-
- nocommon_flag=-fno-common
-fi
-
-if test x$ac_assert_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_ASSERT_CHECKING 1
-_ACEOF
-
-fi
-if test x$ac_tree_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_TREE_CHECKING 1
-_ACEOF
-
- TREEBROWSER=tree-browser.o
-fi
-
-if test x$ac_rtl_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_RTL_CHECKING 1
-_ACEOF
-
-fi
-if test x$ac_rtlflag_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_RTL_FLAG_CHECKING 1
-_ACEOF
-
-fi
-if test x$ac_gc_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_GC_CHECKING 1
-_ACEOF
-
-fi
-if test x$ac_gc_always_collect != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_GC_ALWAYS_COLLECT 1
-_ACEOF
-
-fi
-if test x$ac_fold_checking != x ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_FOLD_CHECKING 1
-_ACEOF
-
-fi
-valgrind_path_defines=
-valgrind_command=
-
-if test "${ac_cv_header_valgrind_h+set}" = set; then
- echo "$as_me:$LINENO: checking for valgrind.h" >&5
-echo $ECHO_N "checking for valgrind.h... $ECHO_C" >&6
-if test "${ac_cv_header_valgrind_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_valgrind_h" >&5
-echo "${ECHO_T}$ac_cv_header_valgrind_h" >&6
-else
- # Is the header compilable?
-echo "$as_me:$LINENO: checking valgrind.h usability" >&5
-echo $ECHO_N "checking valgrind.h usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-#include <valgrind.h>
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_header_compiler=yes
+ ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-# Is the header present?
-echo "$as_me:$LINENO: checking valgrind.h presence" >&5
-echo $ECHO_N "checking valgrind.h presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <valgrind.h>
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (__int64))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: valgrind.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: valgrind.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: valgrind.h: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: valgrind.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: valgrind.h: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: valgrind.h: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: valgrind.h: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: valgrind.h: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: valgrind.h: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: valgrind.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: valgrind.h: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists. ##
-## ------------------------------------------ ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-echo "$as_me:$LINENO: checking for valgrind.h" >&5
-echo $ECHO_N "checking for valgrind.h... $ECHO_C" >&6
-if test "${ac_cv_header_valgrind_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_header_valgrind_h=$ac_header_preproc
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_valgrind_h" >&5
-echo "${ECHO_T}$ac_cv_header_valgrind_h" >&6
-
-fi
-if test $ac_cv_header_valgrind_h = yes; then
- have_valgrind_h=yes
-else
- have_valgrind_h=no
-fi
-
-
-
-if test x$ac_checking_valgrind != x ; then
- # It is certainly possible that there's valgrind but no valgrind.h.
- # GCC relies on making annotations so we must have both.
- echo "$as_me:$LINENO: checking for VALGRIND_DISCARD in <valgrind/memcheck.h>" >&5
-echo $ECHO_N "checking for VALGRIND_DISCARD in <valgrind/memcheck.h>... $ECHO_C" >&6
- cat >conftest.$ac_ext <<_ACEOF
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <valgrind/memcheck.h>
-#ifndef VALGRIND_DISCARD
-#error VALGRIND_DISCARD not defined
-#endif
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
else
- ac_cpp_err=yes
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
fi
-if test -z "$ac_cpp_err"; then
- gcc_cv_header_valgrind_memcheck_h=yes
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- gcc_cv_header_valgrind_memcheck_h=no
+ac_lo= ac_hi=
fi
-rm -f conftest.err conftest.$ac_ext
- echo "$as_me:$LINENO: result: $gcc_cv_header_valgrind_memcheck_h" >&5
-echo "${ECHO_T}$gcc_cv_header_valgrind_memcheck_h" >&6
- echo "$as_me:$LINENO: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
-echo $ECHO_N "checking for VALGRIND_DISCARD in <memcheck.h>... $ECHO_C" >&6
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <memcheck.h>
-#ifndef VALGRIND_DISCARD
-#error VALGRIND_DISCARD not defined
-#endif
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- gcc_cv_header_memcheck_h=yes
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- gcc_cv_header_memcheck_h=no
+ac_lo=`expr '(' $ac_mid ')' + 1`
fi
-rm -f conftest.err conftest.$ac_ext
- echo "$as_me:$LINENO: result: $gcc_cv_header_memcheck_h" >&5
-echo "${ECHO_T}$gcc_cv_header_memcheck_h" >&6
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof___int64=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (__int64), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (__int64)); }
+unsigned long ulongval () { return (long) (sizeof (__int64)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (__int64))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (__int64))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (__int64))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "valgrind", so it can be a program name with args.
-set dummy valgrind; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_valgrind_path+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof___int64=`cat conftest.val`
else
- case "$valgrind_path" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_valgrind_path="$valgrind_path" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- if $ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1; then
- ac_cv_path_valgrind_path="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- ;;
-esac
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (__int64), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }; }
fi
-valgrind_path="$ac_cv_path_valgrind_path"
-if test -n "$valgrind_path"; then
- echo "$as_me:$LINENO: result: $valgrind_path" >&5
-echo "${ECHO_T}$valgrind_path" >&6
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ ac_cv_sizeof___int64=0
fi
-
- if test "x$valgrind_path" = "x" \
- || (test $have_valgrind_h = no \
- && test $gcc_cv_header_memcheck_h = no \
- && test $gcc_cv_header_valgrind_memcheck_h = no); then
- { { echo "$as_me:$LINENO: error: *** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h" >&5
-echo "$as_me: error: *** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h" >&2;}
- { (exit 1); exit 1; }; }
- fi
- valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
- valgrind_command="$valgrind_path -q"
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_VALGRIND_CHECKING 1
-_ACEOF
-
- if test $gcc_cv_header_valgrind_memcheck_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_VALGRIND_MEMCHECK_H 1
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof___int64" >&5
+echo "${ECHO_T}$ac_cv_sizeof___int64" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF___INT64 $ac_cv_sizeof___int64
_ACEOF
- fi
- if test $gcc_cv_header_memcheck_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MEMCHECK_H 1
-_ACEOF
- fi
fi
+# ---------------------
+# Warnings and checking
+# ---------------------
+
+# Check $CC warning features (if it's GCC).
+# We want to use -pedantic, but we don't want warnings about
+# * 'long long'
+# * variadic macros
+# * overlong strings
+# So, we only use -pedantic if we can disable those warnings.
-# Check whether --enable-mapped-location or --disable-mapped-location was given.
-if test "${enable_mapped_location+set}" = set; then
- enableval="$enable_mapped_location"
+loose_warn=
+save_CFLAGS="$CFLAGS"
+for option in -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wcast-qual; do
+ as_acx_Woption=`echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+ echo "$as_me:$LINENO: checking whether $CC supports $option" >&5
+echo $ECHO_N "checking whether $CC supports $option... $ECHO_C" >&6
+if eval "test \"\${$as_acx_Woption+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- enable_mapped_location=no
-fi;
+ CFLAGS="$option"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-if test "$enable_mapped_location" = yes ; then
+int
+main ()
+{
-cat >>confdefs.h <<\_ACEOF
-#define USE_MAPPED_LOCATION 1
+ ;
+ return 0;
+}
_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_acx_Woption=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+eval "$as_acx_Woption=no"
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Enable code coverage collection
-# Check whether --enable-coverage or --disable-coverage was given.
-if test "${enable_coverage+set}" = set; then
- enableval="$enable_coverage"
- case "${enableval}" in
- yes|noopt)
- coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0"
- ;;
- opt)
- coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2"
- ;;
- no)
- # a.k.a. --disable-coverage
- coverage_flags=""
- ;;
- *)
- { { echo "$as_me:$LINENO: error: unknown coverage setting $enableval" >&5
-echo "$as_me: error: unknown coverage setting $enableval" >&2;}
- { (exit 1); exit 1; }; }
- ;;
-esac
-else
- coverage_flags=""
-fi;
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_acx_Woption'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_acx_Woption'}'`" >&6
+ if test `eval echo '${'$as_acx_Woption'}'` = yes; then
+ loose_warn="$loose_warn${loose_warn:+ }$option"
+fi
+ done
+CFLAGS="$save_CFLAGS"
-# Check whether --enable-gather-detailed-mem-stats or --disable-gather-detailed-mem-stats was given.
-if test "${enable_gather_detailed_mem_stats+set}" = set; then
- enableval="$enable_gather_detailed_mem_stats"
+strict_warn=
+save_CFLAGS="$CFLAGS"
+for option in -Wold-style-definition -Wc++-compat -Wmissing-format-attribute; do
+ as_acx_Woption=`echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+ echo "$as_me:$LINENO: checking whether $CC supports $option" >&5
+echo $ECHO_N "checking whether $CC supports $option... $ECHO_C" >&6
+if eval "test \"\${$as_acx_Woption+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- enable_gather_detailed_mem_stats=no
-fi;
-if test x$enable_gather_detailed_mem_stats = xyes ; then
+ CFLAGS="$option"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-cat >>confdefs.h <<\_ACEOF
-#define GATHER_STATISTICS 1
+int
+main ()
+{
+
+ ;
+ return 0;
+}
_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_acx_Woption=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+eval "$as_acx_Woption=no"
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# -------------------------------
-# Miscenalleous configure options
-# -------------------------------
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_acx_Woption'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_acx_Woption'}'`" >&6
+ if test `eval echo '${'$as_acx_Woption'}'` = yes; then
+ strict_warn="$strict_warn${strict_warn:+ }$option"
+fi
-# With stabs
+ done
+CFLAGS="$save_CFLAGS"
-# Check whether --with-stabs or --without-stabs was given.
-if test "${with_stabs+set}" = set; then
- withval="$with_stabs"
- stabs="$with_stabs"
+if test "$GCC" = yes; then
+ echo "$as_me:$LINENO: checking whether $CC supports -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings" >&5
+echo $ECHO_N "checking whether $CC supports -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings... $ECHO_C" >&6
+if test "${acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- stabs=no
-fi;
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-# Determine whether or not multilibs are enabled.
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
- enableval="$enable_multilib"
+int
+main ()
+{
-else
- enable_multilib=yes
-fi;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+CFLAGS="$save_CFLAGS"
+fi
+echo "$as_me:$LINENO: result: $acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings" >&5
+echo "${ECHO_T}$acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings" >&6
+if test $acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros__Wno_overlength_strings = yes; then
+ strict_warn="$strict_warn${strict_warn:+ }-pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings"
+fi
-# Enable __cxa_atexit for C++.
-# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
-if test "${enable___cxa_atexit+set}" = set; then
- enableval="$enable___cxa_atexit"
+fi
-fi;
-# Enable threads
-# Pass with no value to take the default
-# Pass with a value to specify a thread package
-# Check whether --enable-threads or --disable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval="$enable_threads"
+# Check whether --enable-werror-always or --disable-werror-always was given.
+if test "${enable_werror_always+set}" = set; then
+ enableval="$enable_werror_always"
else
- enable_threads=''
+ enable_werror_always=no
fi;
-
-# Check whether --enable-objc-gc or --disable-objc-gc was given.
-if test "${enable_objc_gc+set}" = set; then
- enableval="$enable_objc_gc"
- if test x$enable_objc_gc = xno; then
- objc_boehm_gc=''
-else
- objc_boehm_gc=1
+if test $enable_werror_always = yes; then
+ strict_warn="$strict_warn${strict_warn:+ }-Werror"
fi
-else
- objc_boehm_gc=''
-fi;
-# Check whether --with-dwarf2 or --without-dwarf2 was given.
-if test "${with_dwarf2+set}" = set; then
- withval="$with_dwarf2"
- dwarf2="$with_dwarf2"
-else
- dwarf2=no
-fi;
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- case $enable_shared in
- yes | no) ;;
- *)
- enable_shared=no
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
- esac
+# The above macros do nothing if the compiler is not GCC. However, the
+# Makefile has more goo to add other flags, so this variabl is used to
+# enables warnings only for GCC.
+warn_cflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+fi
+
+
+# Enable expensive internal checks
+is_release=
+if test x"`cat $srcdir/DEV-PHASE`" != xexperimental; then
+ is_release=yes
+fi
+
+# Check whether --enable-checking or --disable-checking was given.
+if test "${enable_checking+set}" = set; then
+ enableval="$enable_checking"
+ ac_checking_flags="${enableval}"
+else
+# Determine the default checks.
+if test x$is_release = x ; then
+ ac_checking_flags=yes
else
- enable_shared=yes
+ ac_checking_flags=release
+fi
fi;
+IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+for check in release $ac_checking_flags
+do
+ case $check in
+ # these set all the flags to specific states
+ yes) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking=1 ;
+ ac_gc_always_collect= ; ac_gimple_checking=1 ; ac_rtl_checking= ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ no|none) ac_assert_checking= ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking= ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ all) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking=1 ;
+ ac_fold_checking=1 ; ac_gc_checking=1 ;
+ ac_gc_always_collect=1 ; ac_gimple_checking=1 ; ac_rtl_checking=1 ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ release) ac_assert_checking=1 ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking=1 ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ # these enable particular checks
+ assert) ac_assert_checking=1 ;;
+ df) ac_df_checking=1 ;;
+ fold) ac_fold_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ gimple) ac_gimple_checking=1 ;;
+ misc) ac_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ runtime) ac_runtime_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ types) ac_types_checking=1 ;;
+ valgrind) ac_valgrind_checking=1 ;;
+ *) { { echo "$as_me:$LINENO: error: unknown check category $check" >&5
+echo "$as_me: error: unknown check category $check" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+done
+IFS="$ac_save_IFS"
+nocommon_flag=""
+if test x$ac_checking != x ; then
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_CHECKING 1
+_ACEOF
-# Check whether --with-sysroot or --without-sysroot was given.
-if test "${with_sysroot+set}" = set; then
- withval="$with_sysroot"
+ nocommon_flag=-fno-common
+fi
- case ${with_sysroot} in
- yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_noncanonical}/sys-root' ;;
- *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
- esac
+if test x$ac_df_checking != x ; then
- TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
- CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR)'
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_DF_CHECKING 1
+_ACEOF
- if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- case ${TARGET_SYSTEM_ROOT} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
- t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
- TARGET_SYSTEM_ROOT_DEFINE="$t"
- ;;
- esac
+fi
+if test x$ac_assert_checking != x ; then
-else
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_ASSERT_CHECKING 1
+_ACEOF
- TARGET_SYSTEM_ROOT=
- TARGET_SYSTEM_ROOT_DEFINE=
- CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
+fi
+if test x$ac_gimple_checking != x ; then
-fi;
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_GIMPLE_CHECKING 1
+_ACEOF
+fi
+if test x$ac_runtime_checking != x ; then
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_RUNTIME_CHECKING 1
+_ACEOF
-# Build with intermodule optimisations
-# Check whether --enable-intermodule or --disable-intermodule was given.
-if test "${enable_intermodule+set}" = set; then
- enableval="$enable_intermodule"
- case ${enable_intermodule} in
- yes) onestep="-onestep";;
- *) onestep="";;
-esac
-else
- onestep=""
-fi;
+fi
+if test x$ac_tree_checking != x ; then
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_TREE_CHECKING 1
+_ACEOF
-# Sanity check enable_languages in case someone does not run the toplevel
-# configure # script.
-# Check whether --enable-languages or --disable-languages was given.
-if test "${enable_languages+set}" = set; then
- enableval="$enable_languages"
- case ,${enable_languages}, in
- ,,|,yes,)
- # go safe -- we cannot be much sure without the toplevel
- # configure's
- # analysis of which target libs are present and usable
- enable_languages=c
- ;;
- *,all,*)
- { { echo "$as_me:$LINENO: error: only the toplevel supports --enable-languages=all" >&5
-echo "$as_me: error: only the toplevel supports --enable-languages=all" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- *,c,*)
- ;;
- *)
- enable_languages=c,${enable_languages}
- ;;
-esac
-else
- enable_languages=c
-fi;
+ TREEBROWSER=tree-browser.o
+fi
+if test x$ac_types_checking != x ; then
-subdirs=
-for lang in ${srcdir}/*/config-lang.in
-do
- case $lang in
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/[*]/config-lang.in) ;;
- *)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- if test "x$lang_alias" = x
- then
- echo "$lang doesn't set \$language." 1>&2
- exit 1
- fi
- case ",$enable_languages," in
- *,$lang_alias,*)
- subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`" ;;
- esac
- ;;
- esac
-done
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_TYPES_CHECKING 1
+_ACEOF
+fi
-# -------------------------
-# Checks for other programs
-# -------------------------
+if test x$ac_rtl_checking != x ; then
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_RTL_CHECKING 1
_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
+
fi
-rm -f conftest.make
+if test x$ac_rtlflag_checking != x ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_RTL_FLAG_CHECKING 1
+_ACEOF
+
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
+if test x$ac_gc_checking != x ; then
-# Find some useful tools
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_GC_CHECKING 1
+_ACEOF
fi
+if test x$ac_gc_always_collect != x ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_GC_ALWAYS_COLLECT 1
+_ACEOF
+
fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
+if test x$ac_fold_checking != x ; then
- test -n "$AWK" && break
-done
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_FOLD_CHECKING 1
+_ACEOF
-# We need awk to create options.c and options.h.
-# Bail out if it's missing.
-case ${AWK} in
- "") { { echo "$as_me:$LINENO: error: can't build without awk, bailing out" >&5
-echo "$as_me: error: can't build without awk, bailing out" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
+fi
+valgrind_path_defines=
+valgrind_command=
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-if test "${gcc_cv_prog_LN_S+set}" = set; then
+if test "${ac_cv_header_valgrind_h+set}" = set; then
+ echo "$as_me:$LINENO: checking for valgrind.h" >&5
+echo $ECHO_N "checking for valgrind.h... $ECHO_C" >&6
+if test "${ac_cv_header_valgrind_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_valgrind_h" >&5
+echo "${ECHO_T}$ac_cv_header_valgrind_h" >&6
else
- rm -f conftestdata_t
-echo >conftestdata_f
-if ln -s conftestdata_f conftestdata_t 2>/dev/null
-then
- gcc_cv_prog_LN_S="ln -s"
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking valgrind.h usability" >&5
+echo $ECHO_N "checking valgrind.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <valgrind.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
else
- if ln conftestdata_f conftestdata_t 2>/dev/null
- then
- gcc_cv_prog_LN_S=ln
- else
- if cp -p conftestdata_f conftestdata_t 2>/dev/null
- then
- gcc_cv_prog_LN_S="cp -p"
- else
- gcc_cv_prog_LN_S=cp
- fi
- fi
-fi
-rm -f conftestdata_f conftestdata_t
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_header_compiler=no
fi
-LN_S="$gcc_cv_prog_LN_S"
-if test "$gcc_cv_prog_LN_S" = "ln -s"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
- if test "$gcc_cv_prog_LN_S" = "ln"; then
- echo "$as_me:$LINENO: result: no, using ln" >&5
-echo "${ECHO_T}no, using ln" >&6
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking valgrind.h presence" >&5
+echo $ECHO_N "checking valgrind.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <valgrind.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
else
- echo "$as_me:$LINENO: result: no, and neither does ln, so using $gcc_cv_prog_LN_S" >&5
-echo "${ECHO_T}no, and neither does ln, so using $gcc_cv_prog_LN_S" >&6
+ ac_cpp_err=
fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
-echo "$as_me:$LINENO: checking whether ln works" >&5
-echo $ECHO_N "checking whether ln works... $ECHO_C" >&6
-if test "${acx_cv_prog_LN+set}" = set; then
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: valgrind.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: valgrind.h: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: valgrind.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: valgrind.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: valgrind.h: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: valgrind.h: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: valgrind.h: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: valgrind.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: valgrind.h: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists. ##
+## ------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for valgrind.h" >&5
+echo $ECHO_N "checking for valgrind.h... $ECHO_C" >&6
+if test "${ac_cv_header_valgrind_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- rm -f conftestdata_t
-echo >conftestdata_f
-if ln conftestdata_f conftestdata_t 2>/dev/null
-then
- acx_cv_prog_LN=ln
-else
- acx_cv_prog_LN=no
+ ac_cv_header_valgrind_h=$ac_header_preproc
fi
-rm -f conftestdata_f conftestdata_t
+echo "$as_me:$LINENO: result: $ac_cv_header_valgrind_h" >&5
+echo "${ECHO_T}$ac_cv_header_valgrind_h" >&6
fi
-if test $acx_cv_prog_LN = no; then
- LN="$LN_S"
- echo "$as_me:$LINENO: result: no, using $LN" >&5
-echo "${ECHO_T}no, using $LN" >&6
+if test $ac_cv_header_valgrind_h = yes; then
+ have_valgrind_h=yes
else
- LN="$acx_cv_prog_LN"
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+ have_valgrind_h=no
fi
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
+
+
+if test x$ac_valgrind_checking != x ; then
+ # It is certainly possible that there's valgrind but no valgrind.h.
+ # GCC relies on making annotations so we must have both.
+ echo "$as_me:$LINENO: checking for VALGRIND_DISCARD in <valgrind/memcheck.h>" >&5
+echo $ECHO_N "checking for VALGRIND_DISCARD in <valgrind/memcheck.h>... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <valgrind/memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
fi
-done
-done
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ gcc_cv_header_valgrind_memcheck_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ gcc_cv_header_valgrind_memcheck_h=no
fi
+rm -f conftest.err conftest.$ac_ext
+ echo "$as_me:$LINENO: result: $gcc_cv_header_valgrind_memcheck_h" >&5
+echo "${ECHO_T}$gcc_cv_header_valgrind_memcheck_h" >&6
+ echo "$as_me:$LINENO: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
+echo $ECHO_N "checking for VALGRIND_DISCARD in <memcheck.h>... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+if test -z "$ac_cpp_err"; then
+ gcc_cv_header_memcheck_h=yes
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ gcc_cv_header_memcheck_h=no
+fi
+rm -f conftest.err conftest.$ac_ext
+ echo "$as_me:$LINENO: result: $gcc_cv_header_memcheck_h" >&5
+echo "${ECHO_T}$gcc_cv_header_memcheck_h" >&6
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+rm -f conf$$.file
+
+# Extract the first word of "valgrind", so it can be a program name with args.
+set dummy valgrind; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if test "${ac_cv_path_valgrind_path+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
+ case "$valgrind_path" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_valgrind_path="$valgrind_path" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if $ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1; then
+ ac_cv_path_valgrind_path="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ ;;
+esac
fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+valgrind_path="$ac_cv_path_valgrind_path"
+if test -n "$valgrind_path"; then
+ echo "$as_me:$LINENO: result: $valgrind_path" >&5
+echo "${ECHO_T}$valgrind_path" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- RANLIB=$ac_ct_RANLIB
-else
- RANLIB="$ac_cv_prog_RANLIB"
+ if test "x$valgrind_path" = "x" \
+ || (test $have_valgrind_h = no \
+ && test $gcc_cv_header_memcheck_h = no \
+ && test $gcc_cv_header_valgrind_memcheck_h = no); then
+ { { echo "$as_me:$LINENO: error: *** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h" >&5
+echo "$as_me: error: *** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
+ valgrind_command="$valgrind_path -q"
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_VALGRIND_CHECKING 1
+_ACEOF
+
+ if test $gcc_cv_header_valgrind_memcheck_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_VALGRIND_MEMCHECK_H 1
+_ACEOF
+
+ fi
+ if test $gcc_cv_header_memcheck_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MEMCHECK_H 1
+_ACEOF
+
+ fi
fi
-case "${host}" in
-*-*-darwin*)
- # By default, the Darwin ranlib will not treat common symbols as
- # definitions when building the archive table of contents. Other
- # ranlibs do that; pass an option to the Darwin ranlib that makes
- # it behave similarly.
- ranlib_flags="-c"
- ;;
-*)
- ranlib_flags=""
+
+
+# Enable code coverage collection
+# Check whether --enable-coverage or --disable-coverage was given.
+if test "${enable_coverage+set}" = set; then
+ enableval="$enable_coverage"
+ case "${enableval}" in
+ yes|noopt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0"
+ ;;
+ opt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2"
+ ;;
+ no)
+ # a.k.a. --disable-coverage
+ coverage_flags=""
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: unknown coverage setting $enableval" >&5
+echo "$as_me: error: unknown coverage setting $enableval" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
esac
+else
+ coverage_flags=""
+fi;
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD compatible install" >&5
-echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+# Check whether --enable-gather-detailed-mem-stats or --disable-gather-detailed-mem-stats was given.
+if test "${enable_gather_detailed_mem_stats+set}" = set; then
+ enableval="$enable_gather_detailed_mem_stats"
+
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
+ enable_gather_detailed_mem_stats=no
+fi;
+if test x$enable_gather_detailed_mem_stats = xyes ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define GATHER_STATISTICS 1
+_ACEOF
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+# -------------------------------
+# Miscenalleous configure options
+# -------------------------------
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+# With stabs
+
+# Check whether --with-stabs or --without-stabs was given.
+if test "${with_stabs+set}" = set; then
+ withval="$with_stabs"
+ stabs="$with_stabs"
+else
+ stabs=no
+fi;
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
-# See if cmp has --ignore-initial.
-echo "$as_me:$LINENO: checking for cmp's capabilities" >&5
-echo $ECHO_N "checking for cmp's capabilities... $ECHO_C" >&6
-if test "${gcc_cv_prog_cmp_skip+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo abfoo >t1
- echo cdfoo >t2
- gcc_cv_prog_cmp_skip=slowcompare
- if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
- if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
- :
- else
- gcc_cv_prog_cmp_skip=gnucompare
- fi
- fi
- if test $gcc_cv_prog_cmp_skip = slowcompare ; then
- if cmp t1 t2 2 2 > /dev/null 2>&1; then
- if cmp t1 t2 1 1 > /dev/null 2>&1; then
- :
- else
- gcc_cv_prog_cmp_skip=fastcompare
- fi
- fi
- fi
- rm t1 t2
+ enable_multilib=yes
+fi;
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_prog_cmp_skip" >&5
-echo "${ECHO_T}$gcc_cv_prog_cmp_skip" >&6
-make_compare_target=$gcc_cv_prog_cmp_skip
+# Enable __cxa_atexit for C++.
+# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
+if test "${enable___cxa_atexit+set}" = set; then
+ enableval="$enable___cxa_atexit"
+fi;
-# See if we have the mktemp command.
-# Extract the first word of "mktemp", so it can be a program name with args.
-set dummy mktemp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_have_mktemp_command+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$have_mktemp_command"; then
- ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_have_mktemp_command="yes"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+# Enable C extension for decimal float if target supports it.
+# Check whether --enable-decimal-float or --disable-decimal-float was given.
+if test "${enable_decimal_float+set}" = set; then
+ enableval="$enable_decimal_float"
+
+ case $enable_decimal_float in
+ yes | no | bid | dpd) ;;
+ *) { { echo "$as_me:$LINENO: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&5
+echo "$as_me: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
- test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
-fi
-fi
-have_mktemp_command=$ac_cv_prog_have_mktemp_command
-if test -n "$have_mktemp_command"; then
- echo "$as_me:$LINENO: result: $have_mktemp_command" >&5
-echo "${ECHO_T}$have_mktemp_command" >&6
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
+ case $target in
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=yes
+ ;;
+ *)
+ { echo "$as_me:$LINENO: WARNING: decimal float is not supported for this target" >&5
+echo "$as_me: WARNING: decimal float is not supported for this target" >&2;}
+ enable_decimal_float=no
+ ;;
+ esac
-MISSING="${CONFIG_SHELL-/bin/sh} $srcdir/../missing"
+fi;
-# See if makeinfo has been installed and is modern enough
-# that we can use it.
-# Extract the first word of "makeinfo", so it can be a program name with args.
-set dummy makeinfo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_MAKEINFO+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$MAKEINFO"; then
- ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MAKEINFO="makeinfo"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_DECIMAL_FLOAT $dfp
+_ACEOF
+
+
+# x86's use BID format instead of DPD
+case x$enable_decimal_float in
+ xyes)
+ case $target in
+ i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=bid
+ ;;
+ *)
+ enable_decimal_float=dpd
+ ;;
+ esac
+ ;;
+ xno)
+ # ENABLE_DECIMAL_FLOAT is set to 0. But we have to have proper
+ # dependency on libdecnumber.
+ enable_decimal_float=dpd
+ ;;
+esac
+
+
+bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_DECIMAL_BID_FORMAT $bid
+_ACEOF
+
+
+# Enable C extension for fixed-point arithmetic.
+# Check whether --enable-fixed-point or --disable-fixed-point was given.
+if test "${enable_fixed_point+set}" = set; then
+ enableval="$enable_fixed_point"
-fi
-fi
-MAKEINFO=$ac_cv_prog_MAKEINFO
-if test -n "$MAKEINFO"; then
- echo "$as_me:$LINENO: result: $MAKEINFO" >&5
-echo "${ECHO_T}$MAKEINFO" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-if test -n "$MAKEINFO"; then
- # Found it, now check the version.
- echo "$as_me:$LINENO: checking for modern makeinfo" >&5
-echo $ECHO_N "checking for modern makeinfo... $ECHO_C" >&6
-if test "${gcc_cv_prog_makeinfo_modern+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_prog_version=`$MAKEINFO --version 2>&1 |
- sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:7375: version of makeinfo is $ac_prog_version" >&5
- case $ac_prog_version in
- '') gcc_cv_prog_makeinfo_modern=no;;
- 4.[2-9]*)
- gcc_cv_prog_makeinfo_modern=yes;;
- *) gcc_cv_prog_makeinfo_modern=no;;
+
+ case $target in
+ mips*-*-*)
+ case $host in
+ mips*-sgi-irix*)
+ { echo "$as_me:$LINENO: WARNING: fixed-point is not supported on IRIX" >&5
+echo "$as_me: WARNING: fixed-point is not supported on IRIX" >&2;}
+ enable_fixed_point=no
+ ;;
+ *)
+ enable_fixed_point=yes
+ ;;
+ esac
+ ;;
+ *)
+ { echo "$as_me:$LINENO: WARNING: fixed-point is not supported for this target" >&5
+echo "$as_me: WARNING: fixed-point is not supported for this target" >&2;}
+ enable_fixed_point=no
+ ;;
esac
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_prog_makeinfo_modern" >&5
-echo "${ECHO_T}$gcc_cv_prog_makeinfo_modern" >&6
-else
- gcc_cv_prog_makeinfo_modern=no
-fi
+fi;
-if test $gcc_cv_prog_makeinfo_modern = no; then
- MAKEINFO="$MISSING makeinfo"
- { echo "$as_me:$LINENO: WARNING:
-*** Makeinfo is missing or too old.
-*** Info documentation will not be built." >&5
-echo "$as_me: WARNING:
-*** Makeinfo is missing or too old.
-*** Info documentation will not be built." >&2;}
- BUILD_INFO=
-else
- BUILD_INFO=info
-fi
+fixedpoint=`if test $enable_fixed_point = yes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_FIXED_POINT $fixedpoint
+_ACEOF
+
+
+# Enable threads
+# Pass with no value to take the default
+# Pass with a value to specify a thread package
+# Check whether --enable-threads or --disable-threads was given.
+if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
-# Is pod2man recent enough to regenerate manpages?
-echo "$as_me:$LINENO: checking for recent Pod::Man" >&5
-echo $ECHO_N "checking for recent Pod::Man... $ECHO_C" >&6
-if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- GENERATED_MANPAGES=generated-manpages
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- GENERATED_MANPAGES=
-fi
+ enable_threads=''
+fi;
+# Check whether --enable-tls or --disable-tls was given.
+if test "${enable_tls+set}" = set; then
+ enableval="$enable_tls"
+
+ case $enable_tls in
+ yes | no) ;;
+ *) { { echo "$as_me:$LINENO: error: '$enable_tls' is an invalid value for --enable-tls.
+Valid choices are 'yes' and 'no'." >&5
+echo "$as_me: error: '$enable_tls' is an invalid value for --enable-tls.
+Valid choices are 'yes' and 'no'." >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
-# How about lex?
-for ac_prog in flex
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_FLEX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$FLEX"; then
- ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+ enable_tls=''
+fi;
+
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ if test x$enable_objc_gc = xno; then
+ objc_boehm_gc=''
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_FLEX="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+ objc_boehm_gc=1
+fi
+else
+ objc_boehm_gc=''
+fi;
+
+
+# Check whether --with-dwarf2 or --without-dwarf2 was given.
+if test "${with_dwarf2+set}" = set; then
+ withval="$with_dwarf2"
+ dwarf2="$with_dwarf2"
+else
+ dwarf2=no
+fi;
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+
+ case $enable_shared in
+ yes | no) ;;
+ *)
+ enable_shared=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+ esac
+
+else
+ enable_shared=yes
+fi;
+
+
+
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+
+fi;
+
+
+# Check whether --with-sysroot or --without-sysroot was given.
+if test "${with_sysroot+set}" = set; then
+ withval="$with_sysroot"
+
+ case ${with_sysroot} in
+ yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_noncanonical}/sys-root' ;;
+ *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
+ esac
+
+ TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
+ CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ if test "x$exec_prefix" = xNONE; then
+ test_exec_prefix=$test_prefix
+ else
+ test_exec_prefix=$exec_prefix
+ fi
+ case ${TARGET_SYSTEM_ROOT} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
+ '${prefix}'|'${prefix}/'*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
+ TARGET_SYSTEM_ROOT_DEFINE="$t"
+ ;;
+ esac
+
+else
+
+ TARGET_SYSTEM_ROOT=
+ TARGET_SYSTEM_ROOT_DEFINE=
+ CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
+
+fi;
+
+
+
+
+# Build with intermodule optimisations
+# Check whether --enable-intermodule or --disable-intermodule was given.
+if test "${enable_intermodule+set}" = set; then
+ enableval="$enable_intermodule"
+ case ${enable_intermodule} in
+ yes) onestep="-onestep";;
+ *) onestep="";;
+esac
+else
+ onestep=""
+fi;
+
+
+
+
+# Check whether --with-pkgversion or --without-pkgversion was given.
+if test "${with_pkgversion+set}" = set; then
+ withval="$with_pkgversion"
+ case "$withval" in
+ yes) { { echo "$as_me:$LINENO: error: package version not specified" >&5
+echo "$as_me: error: package version not specified" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ no) PKGVERSION= ;;
+ *) PKGVERSION="($withval) " ;;
+ esac
+else
+ PKGVERSION="(GCC) "
+
+fi;
+
+
+
+
+# Check whether --with-bugurl or --without-bugurl was given.
+if test "${with_bugurl+set}" = set; then
+ withval="$with_bugurl"
+ case "$withval" in
+ yes) { { echo "$as_me:$LINENO: error: bug URL not specified" >&5
+echo "$as_me: error: bug URL not specified" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ no) BUGURL=
+ ;;
+ *) BUGURL="$withval"
+ ;;
+ esac
+else
+ BUGURL="http://gcc.gnu.org/bugs.html"
+
+fi;
+ case ${BUGURL} in
+ "")
+ REPORT_BUGS_TO=
+ REPORT_BUGS_TEXI=
+ ;;
+ *)
+ REPORT_BUGS_TO="<$BUGURL>"
+ REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
+ ;;
+ esac;
+
+
+
+
+# Sanity check enable_languages in case someone does not run the toplevel
+# configure # script.
+# Check whether --enable-languages or --disable-languages was given.
+if test "${enable_languages+set}" = set; then
+ enableval="$enable_languages"
+ case ,${enable_languages}, in
+ ,,|,yes,)
+ # go safe -- we cannot be much sure without the toplevel
+ # configure's
+ # analysis of which target libs are present and usable
+ enable_languages=c
+ ;;
+ *,all,*)
+ { { echo "$as_me:$LINENO: error: only the toplevel supports --enable-languages=all" >&5
+echo "$as_me: error: only the toplevel supports --enable-languages=all" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *,c,*)
+ ;;
+ *)
+ enable_languages=c,${enable_languages}
+ ;;
+esac
+else
+ enable_languages=c
+fi;
+
+# Used by documentation targets
+
+
+
+# -------------------------
+# Checks for other programs
+# -------------------------
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
fi
+rm -f conftest.make
fi
-FLEX=$ac_cv_prog_FLEX
-if test -n "$FLEX"; then
- echo "$as_me:$LINENO: result: $FLEX" >&5
-echo "${ECHO_T}$FLEX" >&6
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
fi
- test -n "$FLEX" && break
-done
-test -n "$FLEX" || FLEX="$MISSING flex"
-
-# Bison?
-for ac_prog in bison
+# Find some useful tools
+for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_BISON+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$BISON"; then
- ac_cv_prog_BISON="$BISON" # Let the user override the test.
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_BISON="$ac_prog"
+ ac_cv_prog_AWK="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-BISON=$ac_cv_prog_BISON
-if test -n "$BISON"; then
- echo "$as_me:$LINENO: result: $BISON" >&5
-echo "${ECHO_T}$BISON" >&6
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$BISON" && break
+ test -n "$AWK" && break
done
-test -n "$BISON" || BISON="$MISSING bison"
+# We need awk to create options.c and options.h.
+# Bail out if it's missing.
+case ${AWK} in
+ "") { { echo "$as_me:$LINENO: error: can't build without awk, bailing out" >&5
+echo "$as_me: error: can't build without awk, bailing out" >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
-# Binutils are not build modules, unlike bison/flex/makeinfo. So we
-# check for build == host before using them.
-
-# NM
-if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
- && test -d ../binutils ; then
- NM='$(objdir)/../binutils/nm-new'
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+if test "${gcc_cv_prog_LN_S+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln -s conftestdata_f conftestdata_t 2>/dev/null
+then
+ gcc_cv_prog_LN_S="ln -s"
+else
+ if ln conftestdata_f conftestdata_t 2>/dev/null
+ then
+ gcc_cv_prog_LN_S=ln
+ else
+ if cp -p conftestdata_f conftestdata_t 2>/dev/null
+ then
+ gcc_cv_prog_LN_S="cp -p"
+ else
+ gcc_cv_prog_LN_S=cp
+ fi
+ fi
+fi
+rm -f conftestdata_f conftestdata_t
+
+fi
+LN_S="$gcc_cv_prog_LN_S"
+if test "$gcc_cv_prog_LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ if test "$gcc_cv_prog_LN_S" = "ln"; then
+ echo "$as_me:$LINENO: result: no, using ln" >&5
+echo "${ECHO_T}no, using ln" >&6
+ else
+ echo "$as_me:$LINENO: result: no, and neither does ln, so using $gcc_cv_prog_LN_S" >&5
+echo "${ECHO_T}no, and neither does ln, so using $gcc_cv_prog_LN_S" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking whether ln works" >&5
+echo $ECHO_N "checking whether ln works... $ECHO_C" >&6
+if test "${acx_cv_prog_LN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
+
+fi
+if test $acx_cv_prog_LN = no; then
+ LN="$LN_S"
+ echo "$as_me:$LINENO: result: no, using $LN" >&5
+echo "${ECHO_T}no, using $LN" >&6
+else
+ LN="$acx_cv_prog_LN"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_NM+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="nm"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
- test -z "$ac_cv_prog_NM" && ac_cv_prog_NM="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing nm"
fi
fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
-
-# AR
-if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
- && test -d ../binutils ; then
- AR='$(objdir)/../binutils/ar'
-else
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="ar"
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
- test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing ar"
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
fi
fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
fi
+case "${host}" in
+*-*-darwin*)
+ # By default, the Darwin ranlib will not treat common symbols as
+ # definitions when building the archive table of contents. Other
+ # ranlibs do that; pass an option to the Darwin ranlib that makes
+ # it behave similarly.
+ ranlib_flags="-c"
+ ;;
+*)
+ ranlib_flags=""
+esac
-# --------------------
-# Checks for C headers
-# --------------------
-echo "$as_me:$LINENO: checking for GNU C library" >&5
-echo $ECHO_N "checking for GNU C library... $ECHO_C" >&6
-if test "${gcc_cv_glibc+set}" = set; then
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD compatible install" >&5
+echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <features.h>
-int
-main ()
-{
-
-#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
-#error Not a GNU C library system
-#endif
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- gcc_cv_glibc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
-gcc_cv_glibc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
-echo "$as_me:$LINENO: result: $gcc_cv_glibc" >&5
-echo "${ECHO_T}$gcc_cv_glibc" >&6
-if test $gcc_cv_glibc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define _GNU_SOURCE 1
-_ACEOF
-
-fi
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-# Need to reject headers which give warnings, so that the -Werror bootstrap
-# works later. *sigh* This needs to come before all header checks.
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-ac_c_preproc_warn_flag=yes
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
+# See if cmp has --ignore-initial.
+echo "$as_me:$LINENO: checking for cmp's capabilities" >&5
+echo $ECHO_N "checking for cmp's capabilities... $ECHO_C" >&6
+if test "${gcc_cv_prog_cmp_skip+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip=slowcompare
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip=gnucompare
+ fi
+ fi
+ if test $gcc_cv_prog_cmp_skip = slowcompare ; then
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip=fastcompare
+ fi
+ fi
+ fi
+ rm t1 t2
-ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $gcc_cv_prog_cmp_skip" >&5
+echo "${ECHO_T}$gcc_cv_prog_cmp_skip" >&6
+make_compare_target=$gcc_cv_prog_cmp_skip
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
+
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_have_mktemp_command+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_have_mktemp_command="yes"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
+fi
+have_mktemp_command=$ac_cv_prog_have_mktemp_command
+if test -n "$have_mktemp_command"; then
+ echo "$as_me:$LINENO: result: $have_mktemp_command" >&5
+echo "${ECHO_T}$have_mktemp_command" >&6
else
- ac_cv_header_stdc=no
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-rm -f conftest*
-fi
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
+# See if makeinfo has been installed and is modern enough
+# that we can use it.
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
+ # Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKEINFO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-( exit $ac_status )
-ac_cv_header_stdc=no
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
+MAKEINFO=$ac_cv_prog_MAKEINFO
+if test -n "$MAKEINFO"; then
+ echo "$as_me:$LINENO: result: $MAKEINFO" >&5
+echo "${ECHO_T}$MAKEINFO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+
+ if test -n "$MAKEINFO"; then
+ # Found it, now check the version.
+ echo "$as_me:$LINENO: checking for modern makeinfo" >&5
+echo $ECHO_N "checking for modern makeinfo... $ECHO_C" >&6
+if test "${gcc_cv_prog_makeinfo_modern+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_prog_version=`eval $MAKEINFO --version 2>&1 |
+ sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
+
+ case $ac_prog_version in
+ '') gcc_cv_prog_makeinfo_modern=no;;
+ 4.[7-9]*|4.[1-9][0-9]*|[5-9]*|[1-9][0-9]*) gcc_cv_prog_makeinfo_modern=yes;;
+ *) gcc_cv_prog_makeinfo_modern=no;;
+ esac
+
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_prog_makeinfo_modern" >&5
+echo "${ECHO_T}$gcc_cv_prog_makeinfo_modern" >&6
+ else
+ gcc_cv_prog_makeinfo_modern=no
+ fi
+ if test $gcc_cv_prog_makeinfo_modern = no; then
+ MAKEINFO="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing makeinfo"
+ fi
+
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ { echo "$as_me:$LINENO: WARNING:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." >&5
+echo "$as_me: WARNING:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." >&2;}
+ BUILD_INFO=
+else
+ BUILD_INFO=info
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+# Is pod2man recent enough to regenerate manpages?
+echo "$as_me:$LINENO: checking for recent Pod::Man" >&5
+echo $ECHO_N "checking for recent Pod::Man... $ECHO_C" >&6
+if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ GENERATED_MANPAGES=generated-manpages
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ GENERATED_MANPAGES=
fi
-echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
-if test "${ac_cv_header_time+set}" = set; then
+
+MISSING="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing"
+
+# How about lex?
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_FLEX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FLEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_time=yes
+fi
+fi
+FLEX=$ac_cv_prog_FLEX
+if test -n "$FLEX"; then
+ echo "$as_me:$LINENO: result: $FLEX" >&5
+echo "${ECHO_T}$FLEX" >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+
+# Bison?
+for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_BISON+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_BISON="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-ac_cv_header_time=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6
-if test $ac_cv_header_time = yes; then
+BISON=$ac_cv_prog_BISON
+if test -n "$BISON"; then
+ echo "$as_me:$LINENO: result: $BISON" >&5
+echo "${ECHO_T}$BISON" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
+ test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+
+# Binutils are not build modules, unlike bison/flex/makeinfo. So we
+# check for build == host before using them.
+
+# NM
+if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
+ && test -d ../binutils ; then
+ NM='$(objdir)/../binutils/nm-new'
+else
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="nm"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_NM" && ac_cv_prog_NM="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing nm"
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
fi
-echo "$as_me:$LINENO: checking whether string.h and strings.h may both be included" >&5
-echo $ECHO_N "checking whether string.h and strings.h may both be included... $ECHO_C" >&6
-if test "${gcc_cv_header_string+set}" = set; then
+# AR
+if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
+ && test -d ../binutils ; then
+ AR='$(objdir)/../binutils/ar'
+else
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing ar"
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+
+
+# --------------------
+# Checks for C headers
+# --------------------
+
+# Need to reject headers which give warnings, so that the -Werror bootstrap
+# works later. *sigh* This needs to come before all header checks.
+
+ac_c_preproc_warn_flag=yes
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
#include <string.h>
-#include <strings.h>
+#include <float.h>
+
int
main ()
{
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- gcc_cv_header_string=yes
+ ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-gcc_cv_header_string=no
+ac_cv_header_stdc=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_header_string" >&5
-echo "${ECHO_T}$gcc_cv_header_string" >&6
-if test $gcc_cv_header_string = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STRING_WITH_STRINGS 1
-_ACEOF
-fi
-
-echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6
-if test "${ac_cv_header_sys_wait_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_time=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_time=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6
+if test $ac_cv_header_time = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TIME_WITH_SYS_TIME 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether string.h and strings.h may both be included" >&5
+echo $ECHO_N "checking whether string.h and strings.h may both be included... $ECHO_C" >&6
+if test "${gcc_cv_header_string+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+#include <strings.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gcc_cv_header_string=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gcc_cv_header_string=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_header_string" >&5
+echo "${ECHO_T}$gcc_cv_header_string" >&6
+if test $gcc_cv_header_string = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STRING_WITH_STRINGS 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6
+if test "${ac_cv_header_sys_wait_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
#endif
int
if test "${ac_cv_c_bigendian+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_c_bigendian=unknown
-# See if sys/param.h defines the BYTE_ORDER macro.
+ # See if sys/param.h defines the BYTE_ORDER macro.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/param.h>
+
int
main ()
{
-
#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
bogus endian macros
#endif
+
;
return 0;
}
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/param.h>
+
int
main ()
{
-
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
+
;
return 0;
}
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-if test $ac_cv_c_bigendian = unknown; then
+# It does not; compile a test program.
if test "$cross_compiling" = yes; then
- echo $ac_n "cross-compiling... " 2>&6
+ # try to guess the endianness by grepping values into an object file
+ ac_cv_c_bigendian=unknown
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+int
+main ()
+{
+ _ascii (); _ebcdic ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+ ac_cv_c_bigendian=yes
+fi
+if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-main () {
+int
+main ()
+{
/* Are we little or big endian? From Harbison&Steele. */
union
{
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-if test $ac_cv_c_bigendian = unknown; then
-echo "$as_me:$LINENO: checking to probe for byte ordering" >&5
-echo $ECHO_N "checking to probe for byte ordering... $ECHO_C" >&6
-
-cat >conftest.c <<EOF
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
-int main() { _ascii (); _ebcdic (); return 0; }
-EOF
- if test -f conftest.c ; then
- if ${CC-cc} ${CFLAGS} -c conftest.c -o conftest.o && test -f conftest.o ; then
- if test `grep -l BIGenDianSyS conftest.o` ; then
- echo $ac_n ' big endian probe OK, ' 1>&6
- ac_cv_c_bigendian=yes
- fi
- if test `grep -l LiTTleEnDian conftest.o` ; then
- echo $ac_n ' little endian probe OK, ' 1>&6
- if test $ac_cv_c_bigendian = yes ; then
- ac_cv_c_bigendian=unknown;
- else
- ac_cv_c_bigendian=no
- fi
- fi
- echo $ac_n 'guessing bigendian ... ' >&6
- fi
- fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-fi
-if test $ac_cv_c_bigendian = yes; then
+case $ac_cv_c_bigendian in
+ yes)
cat >>confdefs.h <<\_ACEOF
#define WORDS_BIGENDIAN 1
_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HOST_WORDS_BIG_ENDIAN 1
-_ACEOF
-
- BYTEORDER=4321
-else
- BYTEORDER=1234
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define BYTEORDER $BYTEORDER
-_ACEOF
-
-if test $ac_cv_c_bigendian = unknown; then
- { { echo "$as_me:$LINENO: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&5
-echo "$as_me: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&2;}
- { (exit 1); exit 1; }; }
-fi
+ ;;
+ no)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+echo "$as_me: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
# --------
# UNSORTED
# --------
-# Stage specific cflags for build.
-stage1_cflags=
-case $build in
-vax-*-*)
- if test x$GCC = xyes
- then
- stage1_cflags="-Wa,-J"
- else
- stage1_cflags="-J"
- fi
- ;;
-powerpc-*-darwin*)
- # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
- # sources; use -no-cpp-precomp to get to GNU cpp.
- # Apple's GCC has bugs in designated initializer handling, so disable
- # that too.
- stage1_cflags="-no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
- ;;
-esac
-
# These libraries may be used by collect2.
# We may need a special search path to get them linked.
-for ac_func in times clock dup2 kill getrlimit setrlimit atoll atoq \
- sysconf strsignal putc_unlocked fputc_unlocked fputs_unlocked \
- fwrite_unlocked fprintf_unlocked getrusage nl_langinfo \
- scandir alphasort gettimeofday mbstowcs wcswidth mmap mincore \
- setlocale
+
+
+
+
+
+
+
+
+
+for ac_func in times clock kill getrlimit setrlimit atoll atoq \
+ sysconf strsignal getrusage nl_langinfo \
+ gettimeofday mbstowcs wcswidth mmap mincore setlocale \
+ clearerr_unlocked feof_unlocked ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked putchar_unlocked putc_unlocked
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_func" >&5
fi
+echo "$as_me:$LINENO: checking for caddr_t" >&5
+echo $ECHO_N "checking for caddr_t... $ECHO_C" >&6
+if test "${ac_cv_type_caddr_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((caddr_t *) 0)
+ return 0;
+if (sizeof (caddr_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_caddr_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_caddr_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_caddr_t" >&5
+echo "${ECHO_T}$ac_cv_type_caddr_t" >&6
+if test $ac_cv_type_caddr_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define caddr_t char *
+_ACEOF
+
+fi
+
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
fi
-echo "$as_me:$LINENO: checking whether the printf functions support %p" >&5
-echo $ECHO_N "checking whether the printf functions support %p... $ECHO_C" >&6
-if test "${gcc_cv_func_printf_ptr+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- gcc_cv_func_printf_ptr=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdio.h>
-
-int main()
-{
- char buf[64];
- char *p = buf, *q = NULL;
- sprintf(buf, "%p", p);
- sscanf(buf, "%p", &q);
- return (p != q);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- gcc_cv_func_printf_ptr=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-gcc_cv_func_printf_ptr=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core core.* *.core
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_func_printf_ptr" >&5
-echo "${ECHO_T}$gcc_cv_func_printf_ptr" >&6
-if test $gcc_cv_func_printf_ptr = yes ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PRINTF_PTR 1
-_ACEOF
-
-fi
-
echo "$as_me:$LINENO: checking for sys/mman.h" >&5
echo $ECHO_N "checking for sys/mman.h... $ECHO_C" >&6
-for ac_func in getenv atol sbrk abort atof getcwd getwd \
- strsignal putc_unlocked fputs_unlocked fwrite_unlocked \
- fprintf_unlocked strstr errno snprintf vasprintf \
- malloc realloc calloc free basename getopt clock getpagesize
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_func in getenv atol asprintf sbrk abort atof getcwd getwd \
+ strsignal strstr strverscmp \
+ errno snprintf vsnprintf vasprintf malloc realloc calloc \
+ free basename getopt clock getpagesize clearerr_unlocked feof_unlocked ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked putchar_unlocked putc_unlocked
do
ac_tr_decl=`echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
echo "$as_me:$LINENO: checking whether $ac_func is declared" >&5
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# On AIX 5.2, <ldfcn.h> conflicts with <fcntl.h>, as both define incompatible
+# FREAD and FWRITE macros. Fortunately, for GCC's single usage of ldgetname
+# in collect2.c, <fcntl.h> isn't visible, but the configure test below needs
+# to undef these macros to get the correct value for HAVE_DECL_LDGETNAME.
for ac_func in ldgetname
do
#include "ansidecl.h"
#include "system.h"
#ifdef HAVE_LDFCN_H
+#undef FREAD
+#undef FWRITE
#include <ldfcn.h>
#endif
done
-# More time-related stuff.
-echo "$as_me:$LINENO: checking for struct tms" >&5
-echo $ECHO_N "checking for struct tms... $ECHO_C" >&6
-if test "${ac_cv_struct_tms+set}" = set; then
+
+for ac_func in sigaltstack
+do
+ ac_tr_decl=`echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+echo "$as_me:$LINENO: checking whether $ac_func is declared" >&5
+echo $ECHO_N "checking whether $ac_func is declared... $ECHO_C" >&6
+if eval "test \"\${gcc_cv_have_decl_$ac_func+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
-
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
#include "ansidecl.h"
#include "system.h"
-#ifdef HAVE_SYS_TIMES_H
-#include <sys/times.h>
-#endif
+#include <signal.h>
+
int
main ()
{
-struct tms tms;
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
;
return 0;
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_struct_tms=yes
+ eval "gcc_cv_have_decl_$ac_func=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_struct_tms=no
+eval "gcc_cv_have_decl_$ac_func=no"
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_struct_tms" >&5
-echo "${ECHO_T}$ac_cv_struct_tms" >&6
-if test $ac_cv_struct_tms = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRUCT_TMS 1
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6 ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
_ACEOF
-fi
-
-# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6 ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+# More time-related stuff.
+echo "$as_me:$LINENO: checking for struct tms" >&5
+echo $ECHO_N "checking for struct tms... $ECHO_C" >&6
+if test "${ac_cv_struct_tms+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_TIMES_H
+#include <sys/times.h>
+#endif
+
+int
+main ()
+{
+struct tms tms;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_struct_tms=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_struct_tms=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_struct_tms" >&5
+echo "${ECHO_T}$ac_cv_struct_tms" >&6
+if test $ac_cv_struct_tms = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_STRUCT_TMS 1
+_ACEOF
+
+fi
+
+# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
# revisit after autoconf 2.50.
echo "$as_me:$LINENO: checking for clock_t" >&5
echo $ECHO_N "checking for clock_t... $ECHO_C" >&6
# Check whether --enable-sjlj-exceptions or --disable-sjlj-exceptions was given.
if test "${enable_sjlj_exceptions+set}" = set; then
enableval="$enable_sjlj_exceptions"
+ case $target in
+ *-*-hpux10*)
+ if test $enableval != yes; then
+ { echo "$as_me:$LINENO: WARNING: dwarf2 exceptions not supported, sjlj exceptions forced" >&5
+echo "$as_me: WARNING: dwarf2 exceptions not supported, sjlj exceptions forced" >&2;}
+ enableval=yes
+ fi
+ ;;
+esac
+force_sjlj_exceptions=yes
+else
+ case $target in
+ *-*-hpux10*)
+ force_sjlj_exceptions=yes
+ enableval=yes
+ ;;
+ *)
+ force_sjlj_exceptions=no
+ ;;
+esac
+fi;
+if test $force_sjlj_exceptions = yes; then
sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
cat >>confdefs.h <<_ACEOF
#define CONFIG_SJLJ_EXCEPTIONS $sjlj
_ACEOF
-fi;
+fi
# For platforms with the unwind ABI which includes an unwind library,
# libunwind, we can choose to use the system libunwind.
fi;
+# config.gcc also contains tests of with_system_libunwind.
+if test x$with_system_libunwind = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETIPINFO 1
+_ACEOF
+
+fi
+
# --------------------------------------------------------
# Build, host, and target specific configuration fragments
# --------------------------------------------------------
fi
fi
+case ${host} in
+ powerpc*-*-darwin*)
+ echo "$as_me:$LINENO: checking whether mcontext_t fields have underscores" >&5
+echo $ECHO_N "checking whether mcontext_t fields have underscores... $ECHO_C" >&6
+if test "${gcc_cv_mcontext_underscores+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+
+#include <sys/cdefs.h>
+#include <sys/signal.h>
+#include <ucontext.h>
+int main() { mcontext_t m; if (m->ss.srr0) return 0; return 0; }
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gcc_cv_mcontext_underscores=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gcc_cv_mcontext_underscores=yes
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_mcontext_underscores" >&5
+echo "${ECHO_T}$gcc_cv_mcontext_underscores" >&6
+ if test $gcc_cv_mcontext_underscores = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAS_MCONTEXT_T_UNDERSCORES
+_ACEOF
+
+ fi
+ ;;
+esac
+
# ---------
# Threading
# ---------
# default
target_thread_file='single'
;;
- aix | dce | gnat | irix | posix | rtems | \
- single | solaris | vxworks | win32 )
+ aix | dce | gnat | irix | posix | posix95 | rtems | \
+ single | solaris | vxworks | win32 | mipssde)
target_thread_file=${enable_threads}
;;
*)
# Make gthr-default.h if we have a thread file.
gthread_flags=
if test $thread_file != single; then
- rm -f gthr-default.h
- echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h
+ echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h-t
+ if diff gthr-default.h-t gthr-default.h 2>/dev/null; then
+ rm -f gthr-default.h-t
+ else
+ mv -f gthr-default.h-t gthr-default.h
+ fi
gthread_flags=-DHAVE_GTHR_DEFAULT
fi
# UNSORTED
# --------
+use_cxa_atexit=no
if test x$enable___cxa_atexit = xyes || \
test x$enable___cxa_atexit = x -a x$default_use_cxa_atexit = xyes; then
- echo "$as_me:$LINENO: checking for __cxa_atexit" >&5
+ if test x$host = x$target; then
+ case $host in
+ # mingw32 doesn't have __cxa_atexit but uses atexit registration
+ # keyed to flag_use_cxa_atexit
+ *-*-mingw32*)
+ use_cxa_atexit=yes
+ ;;
+ *)
+ echo "$as_me:$LINENO: checking for __cxa_atexit" >&5
echo $ECHO_N "checking for __cxa_atexit... $ECHO_C" >&6
if test "${ac_cv_func___cxa_atexit+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
echo "$as_me:$LINENO: result: $ac_cv_func___cxa_atexit" >&5
echo "${ECHO_T}$ac_cv_func___cxa_atexit" >&6
if test $ac_cv_func___cxa_atexit = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define DEFAULT_USE_CXA_ATEXIT 1
-_ACEOF
-
+ use_cxa_atexit=yes
else
echo "__cxa_atexit can't be enabled on this target"
fi
-fi
-
-# Look for a file containing extra machine modes.
-if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
- extra_modes_file='$(srcdir)'/config/${extra_modes}
-
+ ;;
+ esac
+ else
+ # We can't check for __cxa_atexit when building a cross, so assume
+ # it is available
+ use_cxa_atexit=yes
+ fi
+ if test x$use_cxa_atexit = xyes; then
-cat >>confdefs.h <<_ACEOF
-#define EXTRA_MODES_FILE "config/$extra_modes"
+cat >>confdefs.h <<\_ACEOF
+#define DEFAULT_USE_CXA_ATEXIT 2
_ACEOF
+ fi
fi
-# auto-host.h is the file containing items generated by autoconf and is
-# the first file included by config.h.
-# If host=build, it is correct to have bconfig include auto-host.h
-# as well. If host!=build, we are in error and need to do more
-# work to find out the build config parameters.
-if test x$host = x$build
-then
- build_auto=auto-host.h
+use_getipinfo=yes
+if test x$with_system_libunwind = xyes; then
+ if test x$host = x$target; then
+ echo "$as_me:$LINENO: checking for library containing _Unwind_GetIPInfo" >&5
+echo $ECHO_N "checking for library containing _Unwind_GetIPInfo... $ECHO_C" >&6
+if test "${ac_cv_search__Unwind_GetIPInfo+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # We create a subdir, then run autoconf in the subdir.
- # To prevent recursion we set host and build for the new
- # invocation of configure to the build for this invocation
- # of configure.
- tempdir=build.$$
- rm -rf $tempdir
- mkdir $tempdir
- cd $tempdir
- case ${srcdir} in
- /* | A-Za-z:\\/* ) realsrcdir=${srcdir};;
- *) realsrcdir=../${srcdir};;
- esac
- saved_CFLAGS="${CFLAGS}"
- CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
- ${realsrcdir}/configure \
- --enable-languages=${enable_languages-all} \
- --target=$target_alias --host=$build_alias --build=$build_alias
- CFLAGS="${saved_CFLAGS}"
-
- # We just finished tests for the build machine, so rename
- # the file auto-build.h in the gcc directory.
- mv auto-host.h ../auto-build.h
- cd ..
- rm -rf $tempdir
- build_auto=auto-build.h
-fi
-
-
-tm_file="${tm_file} defaults.h"
-tm_p_file="${tm_p_file} tm-preds.h"
-host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
-build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
-# We don't want ansidecl.h in target files, write code there in ISO/GNU C.
-# put this back in temporarily.
-xm_file="ansidecl.h ${xm_file}"
-
-# --------
-# UNSORTED
-# --------
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search__Unwind_GetIPInfo=no
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-# Get the version trigger filename from the toplevel
-if test "${with_gcc_version_trigger+set}" = set; then
- gcc_version_trigger=$with_gcc_version_trigger
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _Unwind_GetIPInfo ();
+int
+main ()
+{
+_Unwind_GetIPInfo ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search__Unwind_GetIPInfo="none required"
else
- gcc_version_trigger=${srcdir}/version.c
-fi
-gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*"\([^"]*\)".*/\1/'`
-gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-# Compile in configure arguments.
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search__Unwind_GetIPInfo" = no; then
+ for ac_lib in unwind; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _Unwind_GetIPInfo ();
+int
+main ()
+{
+_Unwind_GetIPInfo ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search__Unwind_GetIPInfo="-l$ac_lib"
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
+LIBS=$ac_func_search_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_search__Unwind_GetIPInfo" >&5
+echo "${ECHO_T}$ac_cv_search__Unwind_GetIPInfo" >&6
+if test "$ac_cv_search__Unwind_GetIPInfo" != no; then
+ test "$ac_cv_search__Unwind_GetIPInfo" = "none required" || LIBS="$ac_cv_search__Unwind_GetIPInfo $LIBS"
+
+else
+ use_getipinfo=no
+fi
+
+ fi
+fi
+
+if test x$use_getipinfo = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETIPINFO 1
+_ACEOF
+
+else
+ echo "The system unwind library does not support _Unwind_GetIPInfo."
+fi
+
+# Look for a file containing extra machine modes.
+if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
+ extra_modes_file='$(srcdir)'/config/${extra_modes}
+
+
+cat >>confdefs.h <<_ACEOF
+#define EXTRA_MODES_FILE "config/$extra_modes"
+_ACEOF
+
+fi
+
+# Convert extra_options into a form suitable for Makefile use.
+extra_opt_files=
+for f in $extra_options; do
+ extra_opt_files="$extra_opt_files \$(srcdir)/config/$f"
+done
+
+
+# auto-host.h is the file containing items generated by autoconf and is
+# the first file included by config.h.
+# If host=build, it is correct to have bconfig include auto-host.h
+# as well. If host!=build, we are in error and need to do more
+# work to find out the build config parameters.
+if test x$host = x$build
+then
+ build_auto=auto-host.h
+else
+ # We create a subdir, then run autoconf in the subdir.
+ # To prevent recursion we set host and build for the new
+ # invocation of configure to the build for this invocation
+ # of configure.
+ tempdir=build.$$
+ rm -rf $tempdir
+ mkdir $tempdir
+ cd $tempdir
+ case ${srcdir} in
+ /* | A-Za-z:\\/* ) realsrcdir=${srcdir};;
+ *) realsrcdir=../${srcdir};;
+ esac
+ saved_CFLAGS="${CFLAGS}"
+ CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
+ LDFLAGS="${LDFLAGS_FOR_BUILD}" \
+ ${realsrcdir}/configure \
+ --enable-languages=${enable_languages-all} \
+ --target=$target_alias --host=$build_alias --build=$build_alias
+ CFLAGS="${saved_CFLAGS}"
+
+ # We just finished tests for the build machine, so rename
+ # the file auto-build.h in the gcc directory.
+ mv auto-host.h ../auto-build.h
+ cd ..
+ rm -rf $tempdir
+ build_auto=auto-build.h
+fi
+
+
+tm_file="${tm_file} defaults.h"
+tm_p_file="${tm_p_file} tm-preds.h"
+host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
+build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
+# We don't want ansidecl.h in target files, write code there in ISO/GNU C.
+# put this back in temporarily.
+xm_file="auto-host.h ansidecl.h ${xm_file}"
+
+# --------
+# UNSORTED
+# --------
+
+# Compile in configure arguments.
if test -f configargs.h ; then
# Being re-configured.
gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*"\([^"]*\)".*/\1/'`
EOF
# Internationalization
-PACKAGE=gcc
-VERSION="$gcc_version"
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-
-
# If we haven't got the data from the intl directory,
# assume NLS is disabled.
USE_NLS=no
XGETTEXT=
GMSGFMT=
POSUB=
-if test -f ../intl/config.intl; then
- . ../intl/config.intl
+
+if test -f ../intl/config.intl; then
+ . ../intl/config.intl
fi
echo "$as_me:$LINENO: checking whether NLS is requested" >&5
echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
# by the backticks, then collapsed again by the double quotes,
# leaving us with one backslash in the sed expression (right
# before the dot that mustn't act as a wildcard).
- cat=`echo $cat | sed -e "s!$srcdir/!!" -e "s!\\\\.po!.gmo!"`
- lang=`echo $cat | sed -e 's!po/!!' -e "s!\\\\.gmo!!"`
+ cat=`echo $cat | sed -e "s!$srcdir/po/!!" -e "s!\\\\.po!.gmo!"`
+ lang=`echo $cat | sed -e "s!\\\\.gmo!!"`
# The user is allowed to set LINGUAS to a list of languages to
# install catalogs for. If it's empty that means "all of them."
if test "x$LINGUAS" = x; then
LINGUAS="$XLINGUAS"
echo "$as_me:$LINENO: result: $LINGUAS" >&5
echo "${ECHO_T}$LINGUAS" >&6
+
+
+ DATADIRNAME=share
+
+ INSTOBJEXT=.mo
+
+ GENCAT=gencat
+
+ CATOBJEXT=.gmo
+
fi
# If LIBINTL contains LIBICONV, then clear LIBICONV so we don't get
LIBICONV= ;;
esac
+# Check whether --enable-secureplt or --disable-secureplt was given.
+if test "${enable_secureplt+set}" = set; then
+ enableval="$enable_secureplt"
+
+fi;
+
+# Check whether --enable-cld or --disable-cld was given.
+if test "${enable_cld+set}" = set; then
+ enableval="$enable_cld"
+
+else
+ enable_cld=no
+fi;
+
# Windows32 Registry support for specifying GCC installation paths.
# Check whether --enable-win32-registry or --disable-win32-registry was given.
if test "${enable_win32_registry+set}" = set; then
enableval="$enable_win32_registry"
fi;
-case $host_os in
- win32 | pe | cygwin* | mingw32* | uwin*)
-echo "$as_me:$LINENO: checking whether windows registry support is requested" >&5
-echo $ECHO_N "checking whether windows registry support is requested... $ECHO_C" >&6
-if test "x$enable_win32_registry" != xno; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_WIN32_REGISTRY 1
-_ACEOF
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- echo "$as_me:$LINENO: checking for library containing RegOpenKeyExA" >&5
+case $host_os in
+ win32 | pe | cygwin* | mingw32* | uwin*)
+ if test "x$enable_win32_registry" != xno; then
+ echo "$as_me:$LINENO: checking for library containing RegOpenKeyExA" >&5
echo $ECHO_N "checking for library containing RegOpenKeyExA... $ECHO_C" >&6
if test "${ac_cv_search_RegOpenKeyExA+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
if test "$ac_cv_search_RegOpenKeyExA" != no; then
test "$ac_cv_search_RegOpenKeyExA" = "none required" || LIBS="$ac_cv_search_RegOpenKeyExA $LIBS"
-fi
-
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ enable_win32_registry=no
fi
-# Check if user specified a different registry key.
-case "x${enable_win32_registry}" in
-x | xyes)
- # default.
- gcc_cv_win32_registry_key="$VERSION"
- ;;
-xno)
- # no registry lookup.
- gcc_cv_win32_registry_key=''
- ;;
-*)
- # user-specified key.
- gcc_cv_win32_registry_key="$enable_win32_registry"
- ;;
-esac
+ fi
+
+ if test "x$enable_win32_registry" != xno; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_WIN32_REGISTRY 1
+_ACEOF
+
-if test "x$enable_win32_registry" != xno; then
- echo "$as_me:$LINENO: checking registry key on windows hosts" >&5
-echo $ECHO_N "checking registry key on windows hosts... $ECHO_C" >&6
+ if test "x$enable_win32_registry" != xyes \
+ && test "x$enable_win32_registry" != x; then
cat >>confdefs.h <<_ACEOF
-#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
+#define WIN32_REGISTRY_KEY "$enable_win32_registry"
_ACEOF
- echo "$as_me:$LINENO: result: $gcc_cv_win32_registry_key" >&5
-echo "${ECHO_T}$gcc_cv_win32_registry_key" >&6
-fi
-;;
+ fi
+ fi
+ ;;
esac
# Get an absolute path to the GCC top-level source directory
done
tmake_file="${tmake_file_}"
-# If the host doesn't support symlinks, modify CC in
-# FLAGS_TO_PASS so CC="stage1/xgcc -Bstage1/" works.
-# Otherwise, we can use "CC=$(CC)".
-rm -f symtest.tem
-case "$LN_S" in
- *-s*)
- cc_set_by_configure="\$(CC)"
- quoted_cc_set_by_configure="\$(CC)"
- stage_prefix_set_by_configure="\$(STAGE_PREFIX)"
- quoted_stage_prefix_set_by_configure="\$(STAGE_PREFIX)"
- ;;
- *)
- cc_set_by_configure="\`case '\$(CC)' in stage*) echo '\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\$(CC)';; esac\`"
- quoted_cc_set_by_configure="\\\`case '\\\$(CC)' in stage*) echo '\\\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\\\$(CC)';; esac\\\`"
- stage_prefix_set_by_configure="\`case '\$(STAGE_PREFIX)' in stage*) echo '\$(STAGE_PREFIX)' | sed -e 's|stage|../stage|g';; *) echo '\$(STAGE_PREFIX)';; esac\`"
- quoted_stage_prefix_set_by_configure="\\\`case '\\\$(STAGE_PREFIX)' in stage*) echo '\\\$(STAGE_PREFIX)' | sed -e 's|stage|../stage|g';; *) echo '\\\$(STAGE_PREFIX)';; esac\\\`"
- ;;
-esac
-
out_object_file=`basename $out_file .c`.o
-tm_file_list=
-tm_include_list=
+tm_file_list="options.h"
+tm_include_list="options.h"
for f in $tm_file; do
case $f in
+ ./* )
+ f=`echo $f | sed 's/^..//'`
+ tm_file_list="${tm_file_list} $f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
defaults.h )
tm_file_list="${tm_file_list} \$(srcdir)/$f"
tm_include_list="${tm_include_list} $f"
esac
done
-# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
+# Define macro CROSS_DIRECTORY_STRUCTURE in compilation if this is a
+# cross-compiler which does not use the native headers and libraries.
# Also use all.cross instead of all.internal and adjust SYSTEM_HEADER_DIR.
CROSS=
ALL=all.internal
SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)'
+
+if test "x$with_build_sysroot" != x; then
+ build_system_header_dir=$with_build_sysroot'$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+else
+ # This value is used, even on a native system, because
+ # CROSS_SYSTEM_HEADER_DIR is just
+ # $(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR).
+ build_system_header_dir='$(CROSS_SYSTEM_HEADER_DIR)'
+fi
+
if test x$host != x$target
then
- CROSS="-DCROSS_COMPILE"
+ CROSS="-DCROSS_DIRECTORY_STRUCTURE"
ALL=all.cross
- SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ SYSTEM_HEADER_DIR=$build_system_header_dir
case "$host","$target" in
# Darwin crosses can use the host system's libraries and headers,
# because of the fat library support. Of course, it must be the
CROSS="$CROSS -DNATIVE_CROSS" ;;
esac
elif test "x$TARGET_SYSTEM_ROOT" != x; then
- # This is just $(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR)
- SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ SYSTEM_HEADER_DIR=$build_system_header_dir
fi
# If this is a cross-compiler that does not
# then define inhibit_libc in LIBGCC2_CFLAGS.
# This prevents libgcc2 from containing any code which requires libc
# support.
-inhibit_libc=
+: ${inhibit_libc=false}
if { { test x$host != x$target && test "x$with_sysroot" = x ; } ||
test x$with_newlib = xyes ; } &&
{ test "x$with_headers" = x || test "x$with_headers" = xno ; } ; then
- inhibit_libc=-Dinhibit_libc
+ inhibit_libc=true
fi
# These are the normal (build=host) settings:
CC_FOR_BUILD='$(CC)'
BUILD_CFLAGS='$(ALL_CFLAGS)'
+BUILD_LDFLAGS='$(LDFLAGS)'
STMP_FIXINC=stmp-fixinc
# Possibly disable fixproto, on a per-target basis.
if test x$build != x$host || test "x$coverage_flags" != x
then
BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS_FOR_BUILD)'
+ BUILD_LDFLAGS='$(LDFLAGS_FOR_BUILD)'
if test "x$TARGET_SYSTEM_ROOT" = x; then
- STMP_FIXINC=
- STMP_FIXPROTO=
+ if test "x$STMP_FIXPROTO" != x; then
+ STMP_FIXPROTO=stmp-install-fixproto
+ fi
fi
fi
-# When bootstrapping from the toplevel, only run fixincludes during stage1
-if test -d ../prev-gcc
-then
- STMP_FIXINC=
- cp -R ../prev-gcc/include include
-fi
-
# Expand extra_headers to include complete path.
# This substitutes for lots of t-* files.
extra_headers_list=
extra_headers_list="${extra_headers_list} \$(srcdir)/config/${cpu_type}/${file}"
done
+# If use_gcc_tgmath is set, append ginclude/tgmath.h.
+if test x"$use_gcc_tgmath" = xyes
+then extra_headers_list="${extra_headers_list} \$(srcdir)/ginclude/tgmath.h"
+fi
+
# Define collect2 in Makefile.
case $host_can_use_collect2 in
no) collect2= ;;
# Assembler & linker features
# ---------------------------
-# Identify the assembler which will work hand-in-glove with the newly
-# built GCC, so that we can examine its features. This is the assembler
-# which will be driven by the driver program.
-#
-# If build != host, and we aren't building gas in-tree, we identify a
-# build->target assembler and hope that it will have the same features
-# as the host->target assembler we'll be using.
-echo "$as_me:$LINENO: checking what assembler to use" >&5
-echo $ECHO_N "checking what assembler to use... $ECHO_C" >&6
-in_tree_gas=no
-gcc_cv_as=
-gcc_cv_gas_major_version=
-gcc_cv_gas_minor_version=
-gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
-if test -x "$DEFAULT_ASSEMBLER"; then
- gcc_cv_as="$DEFAULT_ASSEMBLER"
-elif test -x as$host_exeext; then
- # Build using assembler in the current directory.
- gcc_cv_as=./as$host_exeext
-elif test -f $gcc_cv_as_gas_srcdir/configure.in \
- && test -f ../gas/Makefile \
- && test x$build = x$host; then
- # Single tree build which includes gas. We want to prefer it
- # over whatever linker top-level may have detected, since
- # we'll use what we're building after installation anyway.
- in_tree_gas=yes
- gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
-for f in $gcc_cv_as_bfd_srcdir/configure \
- $gcc_cv_as_gas_srcdir/configure \
- $gcc_cv_as_gas_srcdir/configure.in \
- $gcc_cv_as_gas_srcdir/Makefile.in ; do
- gcc_cv_gas_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
- if test x$gcc_cv_gas_version != x; then
- break
- fi
-done
-gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
-gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
-gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
-case $gcc_cv_gas_patch_version in
- "") gcc_cv_gas_patch_version="0" ;;
-esac
-gcc_cv_gas_vers=`expr \( \( $gcc_cv_gas_major_version \* 1000 \) \
- + $gcc_cv_gas_minor_version \) \* 1000 \
- + $gcc_cv_gas_patch_version`
+# During stage 2, ld is actually gcc/collect-ld, which is a small script to
+# discern between when to use prev-ld/ld-new and when to use ld/ld-new.
+# However when ld-new is first executed from the build tree, libtool will
+# relink it as .libs/lt-ld-new, so that it can give it an RPATH that refers
+# to the build tree. While doing this we need to use the previous-stage
+# linker, or we have an infinite loop. The presence of a shell script as
+# ld/ld-new, and the fact that the script *uses ld itself*, is what confuses
+# the gcc/collect-ld script. So we need to know how libtool works, or
+# exec-tool will fail.
- rm -f as$host_exeext
- $LN_S ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
- in_tree_gas_is_elf=no
- if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- || (grep 'obj_format = multi' ../gas/Makefile \
- && grep 'extra_objects =.* obj-elf' ../gas/Makefile) > /dev/null
- then
- in_tree_gas_is_elf=yes
- fi
-elif test -x "$AS_FOR_TARGET"; then
- gcc_cv_as="$AS_FOR_TARGET"
-elif test -x "$AS" && test x$host = x$target; then
- gcc_cv_as="$AS"
-fi
-if test "x$gcc_cv_as" = x; then
- # Search the same directories that the installed compiler will
- # search. Else we may find the wrong assembler and lose. If we
- # do not find a suitable assembler binary, then try the user's
- # path.
- #
- # Also note we have to check MD_EXEC_PREFIX before checking the
- # user's path. Unfortunately, there is no good way to get at the
- # value of MD_EXEC_PREFIX here. So we do a brute force search
- # through all the known MD_EXEC_PREFIX values. Ugh. This needs
- # to be fixed as part of the make/configure rewrite too.
-
- if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- # If the loop below does not find an assembler, then use whatever
- # one we can find in the users's path.
- # user's path.
- if test "x$program_prefix" != xNONE; then
- gcc_cv_as=${program_prefix}as$host_exeext
- else
- gcc_cv_as=`echo as | sed "${program_transform_name}"`$host_exeext
- fi
- if test x$host = x$build; then
- test_dirs="$test_prefix/libexec/gcc/$target_noncanonical/$gcc_version \
- $test_prefix/libexec/gcc/$target_noncanonical \
- /usr/lib/gcc/$target_noncanonical/$gcc_version \
- /usr/lib/gcc/$target_noncanonical \
- $test_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version \
- $test_prefix/$target_noncanonical/bin"
- else
- test_dirs=
- fi
+macro_version='2.1a'
+macro_revision='1.2435'
- if test x$host = x$target; then
- test_dirs="$test_dirs \
- /usr/libexec \
- /usr/ccs/gcc \
- /usr/ccs/bin \
- /udk/usr/ccs/bin \
- /bsd43/usr/lib/cmplrs/cc \
- /usr/cross64/usr/bin \
- /usr/lib/cmplrs/cc \
- /sysv/usr/lib/cmplrs/cc \
- /svr4/usr/lib/cmplrs/cc \
- /usr/bin"
- fi
- for dir in $test_dirs; do
- if test -x $dir/as$host_exeext; then
- gcc_cv_as=$dir/as$host_exeext
- break;
- fi
- done
-fi
-case $in_tree_gas in
- yes)
- echo "$as_me:$LINENO: result: \"newly built gas\"" >&5
-echo "${ECHO_T}\"newly built gas\"" >&6
- ;;
- no)
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
- ;;
-esac
-# Identify the linker which will work hand-in-glove with the newly
-# built GCC, so that we can examine its features. This is the linker
-# which will be driven by the driver program.
-#
-# If build != host, and we aren't building gas in-tree, we identify a
-# build->target linker and hope that it will have the same features
-# as the host->target linker we'll be using.
-echo "$as_me:$LINENO: checking what linker to use" >&5
-echo $ECHO_N "checking what linker to use... $ECHO_C" >&6
-in_tree_ld=no
-gcc_cv_ld=
-gcc_cv_gld_major_version=
-gcc_cv_gld_minor_version=
-gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
-gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
-if test -x "$DEFAULT_LINKER"; then
- gcc_cv_ld="$DEFAULT_LINKER"
-elif test -x collect-ld$host_exeext; then
- # Build using linker in the current directory.
- gcc_cv_ld=./collect-ld$host_exeext
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
- && test -f ../ld/Makefile \
- && test x$build = x$host; then
- # Single tree build which includes ld. We want to prefer it
- # over whatever linker top-level may have detected, since
- # we'll use what we're building after installation anyway.
- in_tree_ld=yes
- in_tree_ld_is_elf=no
- if (grep 'EMUL = .*elf' ../ld/Makefile \
- || grep 'EMUL = .*linux' ../ld/Makefile \
- || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
- in_tree_ld_is_elf=yes
- fi
- for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
- do
- gcc_cv_gld_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
- if test x$gcc_cv_gld_version != x; then
- break
- fi
- done
- gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
- gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- rm -f collect-ld$host_exeext
- $LN_S ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null
-elif test -x "$LD_FOR_TARGET"; then
- gcc_cv_ld="$LD_FOR_TARGET"
-elif test -x "$LD" && test x$host = x$target; then
- gcc_cv_ld="$LD"
-fi
-if test "x$gcc_cv_ld" = x; then
- # Search the same directories that the installed compiler will
- # search. Else we may find the wrong linker and lose. If we
- # do not find a suitable linker binary, then try the user's
- # path.
- #
- # Also note we have to check MD_EXEC_PREFIX before checking the
- # user's path. Unfortunately, there is no good way to get at the
- # value of MD_EXEC_PREFIX here. So we do a brute force search
- # through all the known MD_EXEC_PREFIX values. Ugh. This needs
- # to be fixed as part of the make/configure rewrite too.
-
- if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- # If the loop below does not find an linker, then use whatever
- # one we can find in the users's path.
- # user's path.
- if test "x$program_prefix" != xNONE; then
- gcc_cv_ld=${program_prefix}ld$host_exeext
- else
- gcc_cv_ld=`echo ld | sed "${program_transform_name}"`$host_exeext
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Set options
+
+enable_dlopen=no
+
+
+enable_win32_dll=no
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi;
- if test x$host = x$build; then
- test_dirs="$test_prefix/libexec/gcc/$target_noncanonical/$gcc_version \
- $test_prefix/libexec/gcc/$target_noncanonical \
- /usr/lib/gcc/$target_noncanonical/$gcc_version \
- /usr/lib/gcc/$target_noncanonical \
- $test_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version \
- $test_prefix/$target_noncanonical/bin"
- else
- test_dirs=
+
+
+
+
+
+
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi;
- if test x$host = x$target; then
- test_dirs="$test_dirs \
- /usr/libexec \
- /usr/ccs/gcc \
- /usr/ccs/bin \
- /udk/usr/ccs/bin \
- /bsd43/usr/lib/cmplrs/cc \
- /usr/cross64/usr/bin \
- /usr/lib/cmplrs/cc \
- /sysv/usr/lib/cmplrs/cc \
- /svr4/usr/lib/cmplrs/cc \
- /usr/bin"
+
+
+
+
+
+
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi;
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi;
- for dir in $test_dirs; do
- if test -x $dir/ld$host_exeext; then
- gcc_cv_ld=$dir/ld$host_exeext
- break;
- fi
- done
-fi
-case $in_tree_ld in
- yes)
- echo "$as_me:$LINENO: result: \"newly built ld\"" >&5
-echo "${ECHO_T}\"newly built ld\"" >&6
- ;;
- no)
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
- ;;
-esac
-# Figure out what nm we will be using.
-gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
-echo "$as_me:$LINENO: checking what nm to use" >&5
-echo $ECHO_N "checking what nm to use... $ECHO_C" >&6
-in_tree_nm=no
-if test -x nm$host_exeext; then
- gcc_cv_nm=./nm$host_exeext
-elif test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
- # Single tree build which includes binutils.
- in_tree_nm=yes
- gcc_cv_nm=./nm$host_exeext
- rm -f nm$host_exeext
- $LN_S ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
-elif test "x$program_prefix" != xNONE; then
- gcc_cv_nm=${program_prefix}nm$host_exeext
-else
- gcc_cv_nm=`echo nm | sed "${program_transform_name}"`$host_exeext
-fi
-case $in_tree_nm in
- yes) echo "$as_me:$LINENO: result: \"newly built nm\"" >&5
-echo "${ECHO_T}\"newly built nm\"" >&6 ;;
- no) echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6 ;;
-esac
-# Figure out what objdump we will be using.
-echo "$as_me:$LINENO: checking what objdump to use" >&5
-echo $ECHO_N "checking what objdump to use... $ECHO_C" >&6
-in_tree_objdump=no
-if test -x objdump$host_exeext; then
- gcc_cv_objdump=./objdump$host_exeext
-elif test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
- # Single tree build which includes binutils.
- in_tree_objdump=yes
- gcc_cv_objdump=./objdump$host_exeext
- rm -f objdump$host_exeext
- $LN_S ../binutils/objdump$host_exeext objdump$host_exeext 2>/dev/null
-elif test "x$program_prefix" != xNONE; then
- gcc_cv_objdump=${program_prefix}objdump$host_exeext
-else
- gcc_cv_objdump=`echo objdump | \
- sed "${program_transform_name}"`$host_exeext
-fi
-case $in_tree_objdump in
- yes) echo "$as_me:$LINENO: result: \"newly built objdump\"" >&5
-echo "${ECHO_T}\"newly built objdump\"" >&6 ;;
- no) echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6 ;;
-esac
-# Figure out what assembler alignment features are present.
-echo "$as_me:$LINENO: checking assembler for .balign and .p2align" >&5
-echo $ECHO_N "checking assembler for .balign and .p2align... $ECHO_C" >&6
-if test "${gcc_cv_as_balign_and_p2align+set}" = set; then
+
+
+
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_balign_and_p2align=no
- if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 6 \) \* 1000 + 0`
- then gcc_cv_as_balign_and_p2align=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo '.balign 4
-.p2align 2' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_balign_and_p2align=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
+ # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_balign_and_p2align" >&5
-echo "${ECHO_T}$gcc_cv_as_balign_and_p2align" >&6
-if test $gcc_cv_as_balign_and_p2align = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
-_ACEOF
+SED=$lt_cv_path_SED
-fi
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
-echo "$as_me:$LINENO: checking assembler for .p2align with maximum skip" >&5
-echo $ECHO_N "checking assembler for .p2align with maximum skip... $ECHO_C" >&6
-if test "${gcc_cv_as_max_skip_p2align+set}" = set; then
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for fgrep" >&5
+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6
+if test "${ac_cv_prog_fgrep+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_max_skip_p2align=no
- if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 8 \) \* 1000 + 0`
- then gcc_cv_as_max_skip_p2align=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo '.p2align 4,,7' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_max_skip_p2align=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
+ if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1
+ then ac_cv_prog_fgrep='grep -F'
+ else ac_cv_prog_fgrep='fgrep'
fi
- rm -f conftest.o conftest.s
- fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_max_skip_p2align" >&5
-echo "${ECHO_T}$gcc_cv_as_max_skip_p2align" >&6
-if test $gcc_cv_as_max_skip_p2align = yes; then
+echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5
+echo "${ECHO_T}$ac_cv_prog_fgrep" >&6
+ FGREP=$ac_cv_prog_fgrep
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
-_ACEOF
-fi
+test -z "$GREP" && GREP=grep
-echo "$as_me:$LINENO: checking assembler for working .subsection -1" >&5
-echo $ECHO_N "checking assembler for working .subsection -1... $ECHO_C" >&6
-if test "${gcc_cv_as_subsection_m1+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- gcc_cv_as_subsection_m1=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
- then gcc_cv_as_subsection_m1=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo 'conftest_label1: .word 0
-.subsection -1
-conftest_label2: .word 0
-.previous' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- if test x$gcc_cv_nm != x; then
- $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
- $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
- if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
- then :
- else gcc_cv_as_subsection_m1=yes
- fi
- rm -f conftest.nm1 conftest.nm2
- fi
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_subsection_m1" >&5
-echo "${ECHO_T}$gcc_cv_as_subsection_m1" >&6
-if test $gcc_cv_as_subsection_m1 = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_SUBSECTION_ORDERING 1
-_ACEOF
-fi
-echo "$as_me:$LINENO: checking assembler for .weak" >&5
-echo $ECHO_N "checking assembler for .weak... $ECHO_C" >&6
-if test "${gcc_cv_as_weak+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- gcc_cv_as_weak=no
- if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 2 \) \* 1000 + 0`
- then gcc_cv_as_weak=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo ' .weak foobar' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_weak=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_weak" >&5
-echo "${ECHO_T}$gcc_cv_as_weak" >&6
-if test $gcc_cv_as_weak = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_WEAK 1
-_ACEOF
-fi
-# .hidden needs to be supported in both the assembler and the linker,
-# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
-# This is irritatingly difficult to feature test for; we have to check the
-# date string after the version number. If we've got an in-tree
-# ld, we don't know its patchlevel version, so we set the baseline at 2.13
-# to be safe.
-# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
-echo "$as_me:$LINENO: checking assembler for .hidden" >&5
-echo $ECHO_N "checking assembler for .hidden... $ECHO_C" >&6
-if test "${gcc_cv_as_hidden+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- gcc_cv_as_hidden=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 13 \) \* 1000 + 0`
- then gcc_cv_as_hidden=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo ' .hidden foobar
-foobar:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_hidden=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_hidden" >&5
-echo "${ECHO_T}$gcc_cv_as_hidden" >&6
-echo "$as_me:$LINENO: checking linker for .hidden support" >&5
-echo $ECHO_N "checking linker for .hidden support... $ECHO_C" >&6
-if test "${gcc_cv_ld_hidden+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
else
- if test $in_tree_ld = yes ; then
- gcc_cv_ld_hidden=no
- if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
- && test $in_tree_ld_is_elf = yes; then
- gcc_cv_ld_hidden=yes
- fi
+ with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
else
- gcc_cv_ld_hidden=yes
- ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
- if echo "$ld_ver" | grep GNU > /dev/null; then
- ld_vers=`echo $ld_ver | sed -n \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p'`
- ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
- if test 0"$ld_date" -lt 20020404; then
- if test -n "$ld_date"; then
- # If there was date string, but was earlier than 2002-04-04, fail
- gcc_cv_ld_hidden=no
- elif test -z "$ld_vers"; then
- # If there was no date string nor ld version number, something is wrong
- gcc_cv_ld_hidden=no
- else
- ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
- ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
- ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
- test -z "$ld_vers_patch" && ld_vers_patch=0
- if test "$ld_vers_major" -lt 2; then
- gcc_cv_ld_hidden=no
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
- gcc_cv_ld_hidden="no"
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
- gcc_cv_ld_hidden=no
- fi
- fi
- fi
- else
- case "${target}" in
- hppa64*-*-hpux* | ia64*-*-hpux*)
- gcc_cv_ld_hidden=yes
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
;;
*)
- gcc_cv_ld_hidden=no
+ test "$with_gnu_ld" != yes && break
;;
- esac
- fi
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_ld_hidden" >&5
-echo "${ECHO_T}$gcc_cv_ld_hidden" >&6
-libgcc_visibility=no
-if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden = yes; then
- libgcc_visibility=yes
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_HIDDEN 1
-_ACEOF
-fi
-# Check if we have .[us]leb128, and support symbol arithmetic with it.
-echo "$as_me:$LINENO: checking assembler for .sleb128 and .uleb128" >&5
-echo $ECHO_N "checking assembler for .sleb128 and .uleb128... $ECHO_C" >&6
-if test "${gcc_cv_as_leb128+set}" = set; then
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_leb128=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
- then gcc_cv_as_leb128=yes
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
fi
- elif test x$gcc_cv_as != x; then
- echo ' .data
- .uleb128 L2 - L1
-L1:
- .uleb128 1280
- .sleb128 -1010
-L2:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- # GAS versions before 2.11 do not support uleb128,
- # despite appearing to.
- # ??? There exists an elf-specific test that will crash
- # the assembler. Perhaps it's better to figure out whether
- # arbitrary sections are supported and try the test.
- as_ver=`$gcc_cv_as --version 2>/dev/null | sed 1q`
- if echo "$as_ver" | grep GNU > /dev/null; then
- as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
- as_major=`echo $as_ver | sed 's/\..*//'`
- as_minor=`echo $as_ver | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
- if test $as_major -eq 2 && test $as_minor -lt 11
- then :
- else gcc_cv_as_leb128=yes
- fi
- fi
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_leb128" >&5
-echo "${ECHO_T}$gcc_cv_as_leb128" >&6
-if test $gcc_cv_as_leb128 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_LEB128 1
-_ACEOF
+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+echo "${ECHO_T}$DUMPBIN" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# GAS versions up to and including 2.11.0 may mis-optimize
-# .eh_frame data.
-echo "$as_me:$LINENO: checking assembler for eh_frame optimization" >&5
-echo $ECHO_N "checking assembler for eh_frame optimization... $ECHO_C" >&6
-if test "${gcc_cv_as_eh_frame+set}" = set; then
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_eh_frame=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
- then gcc_cv_as_eh_frame=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo ' .text
-.LFB1:
- .4byte 0
-.L1:
- .4byte 0
-.LFE1:
- .section .eh_frame,"aw",@progbits
-__FRAME_BEGIN__:
- .4byte .LECIE1-.LSCIE1
-.LSCIE1:
- .4byte 0x0
- .byte 0x1
- .ascii "z\0"
- .byte 0x1
- .byte 0x78
- .byte 0x1a
- .byte 0x0
- .byte 0x4
- .4byte 1
- .p2align 1
-.LECIE1:
-.LSFDE1:
- .4byte .LEFDE1-.LASFDE1
-.LASFDE1:
- .4byte .LASFDE1-__FRAME_BEGIN__
- .4byte .LFB1
- .4byte .LFE1-.LFB1
- .byte 0x4
- .4byte .LFE1-.LFB1
- .byte 0x4
- .4byte .L1-.LFB1
-.LEFDE1:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- cat > conftest.lit <<EOF
- 0000 10000000 00000000 017a0001 781a0004 .........z..x...
- 0010 01000000 12000000 18000000 00000000 ................
- 0020 08000000 04080000 0044 .........D
-EOF
-cat > conftest.big <<EOF
- 0000 00000010 00000000 017a0001 781a0004 .........z..x...
- 0010 00000001 00000012 00000018 00000000 ................
- 0020 00000008 04000000 0844 .........D
-EOF
- # If the assembler didn't choke, and we can objdump,
- # and we got the correct data, then succeed.
- if test x$gcc_cv_objdump != x \
- && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
- | tail -3 > conftest.got \
- && { cmp conftest.lit conftest.got > /dev/null 2>&1 \
- || cmp conftest.big conftest.got > /dev/null 2>&1; }
- then
- gcc_cv_as_eh_frame=yes
- elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- gcc_cv_as_eh_frame=buggy
- else
- # Uh oh, what do we do now?
- gcc_cv_as_eh_frame=no
- fi
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_eh_frame" >&5
-echo "${ECHO_T}$gcc_cv_as_eh_frame" >&6
+ test -n "$ac_ct_DUMPBIN" && break
+done
+test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":"
-if test $gcc_cv_as_eh_frame = buggy; then
+ DUMPBIN=$ac_ct_DUMPBIN
+fi
-cat >>confdefs.h <<\_ACEOF
-#define USE_AS_TRADITIONAL_FORMAT 1
-_ACEOF
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
fi
+test -z "$NM" && NM=nm
-echo "$as_me:$LINENO: checking assembler for section merging support" >&5
-echo $ECHO_N "checking assembler for section merging support... $ECHO_C" >&6
-if test "${gcc_cv_as_shf_merge+set}" = set; then
+
+
+
+
+
+echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6
+if test "${lt_cv_nm_interface+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_shf_merge=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
- then gcc_cv_as_shf_merge=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_shf_merge=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:14744: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:14747: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:14750: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
fi
+ rm -f conftest*
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_shf_merge" >&5
-echo "${ECHO_T}$gcc_cv_as_shf_merge" >&6
+echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+echo "${ECHO_T}$lt_cv_nm_interface" >&6
-if test $gcc_cv_as_shf_merge = no; then
- echo "$as_me:$LINENO: checking assembler for section merging support" >&5
-echo $ECHO_N "checking assembler for section merging support... $ECHO_C" >&6
-if test "${gcc_cv_as_shf_merge+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
else
- gcc_cv_as_shf_merge=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
- then gcc_cv_as_shf_merge=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo '.section .rodata.str, "aMS", %progbits, 1' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_shf_merge=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_shf_merge" >&5
-echo "${ECHO_T}$gcc_cv_as_shf_merge" >&6
-fi
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
-cat >>confdefs.h <<_ACEOF
-#define HAVE_GAS_SHF_MERGE `if test $gcc_cv_as_shf_merge = yes; then echo 1; else echo 0; fi`
-_ACEOF
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
-echo "$as_me:$LINENO: checking assembler for COMDAT group support" >&5
-echo $ECHO_N "checking assembler for COMDAT group support... $ECHO_C" >&6
-if test "${gcc_cv_as_comdat_group+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- gcc_cv_as_comdat_group=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
- then gcc_cv_as_comdat_group=yes
-fi
- elif test x$gcc_cv_as != x; then
- echo '.section .text,"axG",@progbits,.foo,comdat' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_comdat_group=yes
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
- rm -f conftest.o conftest.s
- fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`getconf ARG_MAX 2> /dev/null`
+ if test -n $lt_cv_sys_max_cmd_len; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_comdat_group" >&5
-echo "${ECHO_T}$gcc_cv_as_comdat_group" >&6
-if test $gcc_cv_as_comdat_group = yes; then
- gcc_cv_as_comdat_group_percent=no
+if test -n $lt_cv_sys_max_cmd_len ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
else
- echo "$as_me:$LINENO: checking assembler for COMDAT group support" >&5
-echo $ECHO_N "checking assembler for COMDAT group support... $ECHO_C" >&6
-if test "${gcc_cv_as_comdat_group_percent+set}" = set; then
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6
+
+
+echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_comdat_group_percent=no
- if test $in_tree_gas = yes; then
- if test $in_tree_gas_is_elf = yes \
- && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
- then gcc_cv_as_comdat_group_percent=yes
+ lt_cv_ld_reload_flag='-r'
fi
- elif test x$gcc_cv_as != x; then
- echo '.section .text,"axG",%progbits,.foo,comdat' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then
- gcc_cv_as_comdat_group_percent=yes
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
- rm -f conftest.o conftest.s
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_comdat_group_percent" >&5
-echo "${ECHO_T}$gcc_cv_as_comdat_group_percent" >&6
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-cat >>confdefs.h <<_ACEOF
-#define HAVE_GAS_COMDAT_GROUP `if test $gcc_cv_as_comdat_group = yes || test $gcc_cv_as_comdat_group_percent = yes; then echo 1; else echo 0; fi`
-_ACEOF
-# Thread-local storage - the check is heavily parametrized.
-conftest_s=
-tls_first_major=
-tls_first_minor=
-tls_as_opt=
-case "$target" in
- alpha*-*-*)
- conftest_s='
- .section ".tdata","awT",@progbits
-foo: .long 25
- .text
- ldq $27,__tls_get_addr($29) !literal!1
- lda $16,foo($29) !tlsgd!1
- jsr $26,($27),__tls_get_addr !lituse_tlsgd!1
- ldq $27,__tls_get_addr($29) !literal!2
- lda $16,foo($29) !tlsldm!2
- jsr $26,($27),__tls_get_addr !lituse_tlsldm!2
- ldq $1,foo($29) !gotdtprel
- ldah $2,foo($29) !dtprelhi
- lda $3,foo($2) !dtprello
- lda $4,foo($29) !dtprel
- ldq $1,foo($29) !gottprel
- ldah $2,foo($29) !tprelhi
- lda $3,foo($2) !tprello
- lda $4,foo($29) !tprel'
- tls_first_major=2
- tls_first_minor=13
- tls_as_opt=--fatal-warnings
- ;;
- i[34567]86-*-*)
- conftest_s='
- .section ".tdata","awT",@progbits
-foo: .long 25
- .text
- movl %gs:0, %eax
- leal foo@TLSGD(,%ebx,1), %eax
- leal foo@TLSLDM(%ebx), %eax
- leal foo@DTPOFF(%eax), %edx
- movl foo@GOTTPOFF(%ebx), %eax
- subl foo@GOTTPOFF(%ebx), %eax
- addl foo@GOTNTPOFF(%ebx), %eax
- movl foo@INDNTPOFF, %eax
- movl $foo@TPOFF, %eax
- subl $foo@TPOFF, %eax
- leal foo@NTPOFF(%ecx), %eax'
- tls_first_major=2
- tls_first_minor=14
- tls_as_opt=--fatal-warnings
- ;;
- x86_64-*-*)
- conftest_s='
- .section ".tdata","awT",@progbits
-foo: .long 25
- .text
- movq %fs:0, %rax
- leaq foo@TLSGD(%rip), %rdi
- leaq foo@TLSLD(%rip), %rdi
- leaq foo@DTPOFF(%rax), %rdx
- movq foo@GOTTPOFF(%rip), %rax
- movq $foo@TPOFF, %rax'
- tls_first_major=2
- tls_first_minor=14
- tls_as_opt=--fatal-warnings
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+ echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 15805 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ lt_cv_cc_needs_belf=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *) LD="${LD-ld} -64" ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:16425: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:16429: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ fi
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic='-qnocommon'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ icc* | ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+
+
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:16747: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:16751: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_static_works=yes
+ fi
+ else
+ lt_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:16852: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:16856: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:16907: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:16911: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+ if test "$hard_links" = no; then
+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ fi
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can't use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ *)
+ tmp_sharedflag='-shared' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ fi
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[012])
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ ;;
+ esac
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ if test "$GCC" = yes ; then
+ if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi-module to the
+ # link flags.
+ echo "int foo(void){return 1;}" > conftest.c
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib ${wl}-single_module conftest.c
+ if test -f libconftest.dylib; then
+ lt_cv_apple_cc_single_mod=yes
+ rm libconftest.dylib
+ fi
+ rm conftest.$ac_ext
+ fi
+fi
+
+ output_verbose_link_cmd=echo
+ if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
+ archive_cmds='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $single_module -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ module_expsym_cmds='sed -e "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd=echo
+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO $rpath/$soname` $verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc=no
+ else
+ archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+withGCC=$GCC
+if test "$withGCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ if test "$host_cpu" = m68k; then
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ else
+ dynamic_linker=no
+ fi
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $withGCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir"; then
+ shlibpath_overrides_runpath=yes
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+ lt_cv_dlopen="shl_load"
+else
+ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+ echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+ lt_cv_dlopen="dlopen"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_svld_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_dld_link=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 19704 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ exit (status);
+}
+_LT_EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 19804 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ exit (status);
+}
+_LT_EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ ;;
+ *)
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Only expand once:
+
+
+
+
+
+# Identify the assembler which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the assembler
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target assembler and hope that it will have the same features
+# as the host->target assembler we'll be using.
+gcc_cv_gas_major_version=
+gcc_cv_gas_minor_version=
+gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
+
+if test "${gcc_cv_as+set}" = set; then
+ :
+else
+
+if test -x "$DEFAULT_ASSEMBLER"; then
+ gcc_cv_as="$DEFAULT_ASSEMBLER"
+elif test -f $gcc_cv_as_gas_srcdir/configure.in \
+ && test -f ../gas/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_as=../gas/as-new$build_exeext
+elif test -x as$build_exeext; then
+ # Build using assembler in the current directory.
+ gcc_cv_as=./as$build_exeext
+elif test -x $AS_FOR_TARGET; then
+ gcc_cv_as="$AS_FOR_TARGET"
+else
+ # Extract the first word of "$AS_FOR_TARGET", so it can be a program name with args.
+set dummy $AS_FOR_TARGET; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_gcc_cv_as+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $gcc_cv_as in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+gcc_cv_as=$ac_cv_path_gcc_cv_as
+
+if test -n "$gcc_cv_as"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
+echo "${ECHO_T}$gcc_cv_as" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+fi
+
+
+ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
+
+case "$ORIGINAL_AS_FOR_TARGET" in
+ ./as | ./as$build_exeext) ;;
+ *) ac_config_files="$ac_config_files as:exec-tool.in"
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking what assembler to use" >&5
+echo $ECHO_N "checking what assembler to use... $ECHO_C" >&6
+if test "$gcc_cv_as" = ../gas/as-new$build_exeext; then
+ # Single tree build which includes gas. We want to prefer it
+ # over whatever linker top-level may have detected, since
+ # we'll use what we're building after installation anyway.
+ echo "$as_me:$LINENO: result: newly built gas" >&5
+echo "${ECHO_T}newly built gas" >&6
+ in_tree_gas=yes
+ gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+for f in $gcc_cv_as_bfd_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure.in \
+ $gcc_cv_as_gas_srcdir/Makefile.in ; do
+ gcc_cv_gas_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
+ if test x$gcc_cv_gas_version != x; then
+ break
+ fi
+done
+gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
+gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+case $gcc_cv_gas_patch_version in
+ "") gcc_cv_gas_patch_version="0" ;;
+esac
+gcc_cv_gas_vers=`expr \( \( $gcc_cv_gas_major_version \* 1000 \) \
+ + $gcc_cv_gas_minor_version \) \* 1000 \
+ + $gcc_cv_gas_patch_version`
+
+ in_tree_gas_is_elf=no
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ || (grep 'obj_format = multi' ../gas/Makefile \
+ && grep 'extra_objects =.* obj-elf' ../gas/Makefile) > /dev/null
+ then
+ in_tree_gas_is_elf=yes
+ fi
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
+echo "${ECHO_T}$gcc_cv_as" >&6
+ in_tree_gas=no
+fi
+
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
+gcc_cv_gld_major_version=
+gcc_cv_gld_minor_version=
+gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
+gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+
+if test "${gcc_cv_ld+set}" = set; then
+ :
+else
+
+if test -x "$DEFAULT_LINKER"; then
+ gcc_cv_ld="$DEFAULT_LINKER"
+elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+ && test -f ../ld/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../ld/ld-new$build_exeext
+elif test -x collect-ld$build_exeext; then
+ # Build using linker in the current directory.
+ gcc_cv_ld=./collect-ld$build_exeext
+elif test -x $LD_FOR_TARGET; then
+ gcc_cv_ld="$LD_FOR_TARGET"
+else
+ # Extract the first word of "$LD_FOR_TARGET", so it can be a program name with args.
+set dummy $LD_FOR_TARGET; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $gcc_cv_ld in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+gcc_cv_ld=$ac_cv_path_gcc_cv_ld
+
+if test -n "$gcc_cv_ld"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
+echo "${ECHO_T}$gcc_cv_ld" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+fi
+
+
+ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
+
+case "$ORIGINAL_LD_FOR_TARGET" in
+ ./collect-ld | ./collect-ld$build_exeext) ;;
+ *) ac_config_files="$ac_config_files collect-ld:exec-tool.in"
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking what linker to use" >&5
+echo $ECHO_N "checking what linker to use... $ECHO_C" >&6
+if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext; then
+ # Single tree build which includes ld. We want to prefer it
+ # over whatever linker top-level may have detected, since
+ # we'll use what we're building after installation anyway.
+ echo "$as_me:$LINENO: result: newly built ld" >&5
+echo "${ECHO_T}newly built ld" >&6
+ in_tree_ld=yes
+ in_tree_ld_is_elf=no
+ if (grep 'EMUL = .*elf' ../ld/Makefile \
+ || grep 'EMUL = .*linux' ../ld/Makefile \
+ || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
+ in_tree_ld_is_elf=yes
+ fi
+ for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
+ do
+ gcc_cv_gld_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
+ if test x$gcc_cv_gld_version != x; then
+ break
+ fi
+ done
+ gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
+ gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
+echo "${ECHO_T}$gcc_cv_ld" >&6
+ in_tree_ld=no
+fi
+
+# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
+if test "${gcc_cv_nm+set}" = set; then
+ :
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_nm=../binutils/nm-new$build_exeext
+elif test -x nm$build_exeext; then
+ gcc_cv_nm=./nm$build_exeext
+elif test -x $NM_FOR_TARGET; then
+ gcc_cv_nm="$NM_FOR_TARGET"
+else
+ # Extract the first word of "$NM_FOR_TARGET", so it can be a program name with args.
+set dummy $NM_FOR_TARGET; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $gcc_cv_nm in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+gcc_cv_nm=$ac_cv_path_gcc_cv_nm
+
+if test -n "$gcc_cv_nm"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
+echo "${ECHO_T}$gcc_cv_nm" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+fi
+
+
+echo "$as_me:$LINENO: checking what nm to use" >&5
+echo $ECHO_N "checking what nm to use... $ECHO_C" >&6
+if test "$gcc_cv_nm" = ../binutils/nm-new$build_exeext; then
+ # Single tree build which includes binutils.
+ echo "$as_me:$LINENO: result: newly built nm" >&5
+echo "${ECHO_T}newly built nm" >&6
+ in_tree_nm=yes
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
+echo "${ECHO_T}$gcc_cv_nm" >&6
+ in_tree_nm=no
+fi
+
+ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
+
+case "$ORIGINAL_NM_FOR_TARGET" in
+ ./nm | ./nm$build_exeext) ;;
+ *) ac_config_files="$ac_config_files nm:exec-tool.in"
+ ;;
+esac
+
+
+# Figure out what objdump we will be using.
+if test "${gcc_cv_objdump+set}" = set; then
+ :
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ # Single tree build which includes binutils.
+ gcc_cv_objdump=../binutils/objdump$build_exeext
+elif test -x objdump$build_exeext; then
+ gcc_cv_objdump=./objdump$build_exeext
+elif test -x $OBJDUMP_FOR_TARGET; then
+ gcc_cv_objdump="$OBJDUMP_FOR_TARGET"
+else
+ # Extract the first word of "$OBJDUMP_FOR_TARGET", so it can be a program name with args.
+set dummy $OBJDUMP_FOR_TARGET; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $gcc_cv_objdump in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
+
+if test -n "$gcc_cv_objdump"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
+echo "${ECHO_T}$gcc_cv_objdump" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+fi
+
+
+echo "$as_me:$LINENO: checking what objdump to use" >&5
+echo $ECHO_N "checking what objdump to use... $ECHO_C" >&6
+if test "$gcc_cv_objdump" = ../binutils/objdump$build_exeext; then
+ # Single tree build which includes binutils.
+ echo "$as_me:$LINENO: result: newly built objdump" >&5
+echo "${ECHO_T}newly built objdump" >&6
+elif test x$gcc_cv_objdump = x; then
+ echo "$as_me:$LINENO: result: not found" >&5
+echo "${ECHO_T}not found" >&6
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
+echo "${ECHO_T}$gcc_cv_objdump" >&6
+fi
+
+# Figure out what assembler alignment features are present.
+echo "$as_me:$LINENO: checking assembler for .balign and .p2align" >&5
+echo $ECHO_N "checking assembler for .balign and .p2align... $ECHO_C" >&6
+if test "${gcc_cv_as_balign_and_p2align+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_balign_and_p2align=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 6 \) \* 1000 + 0`
+ then gcc_cv_as_balign_and_p2align=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.balign 4
+.p2align 2' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_balign_and_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_balign_and_p2align" >&5
+echo "${ECHO_T}$gcc_cv_as_balign_and_p2align" >&6
+if test $gcc_cv_as_balign_and_p2align = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for .p2align with maximum skip" >&5
+echo $ECHO_N "checking assembler for .p2align with maximum skip... $ECHO_C" >&6
+if test "${gcc_cv_as_max_skip_p2align+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_max_skip_p2align=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 8 \) \* 1000 + 0`
+ then gcc_cv_as_max_skip_p2align=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.p2align 4,,7' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_max_skip_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_max_skip_p2align" >&5
+echo "${ECHO_T}$gcc_cv_as_max_skip_p2align" >&6
+if test $gcc_cv_as_max_skip_p2align = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for .literal16" >&5
+echo $ECHO_N "checking assembler for .literal16... $ECHO_C" >&6
+if test "${gcc_cv_as_literal16+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_literal16=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 8 \) \* 1000 + 0`
+ then gcc_cv_as_literal16=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.literal16' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_literal16=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_literal16" >&5
+echo "${ECHO_T}$gcc_cv_as_literal16" >&6
+if test $gcc_cv_as_literal16 = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_LITERAL16 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for working .subsection -1" >&5
+echo $ECHO_N "checking assembler for working .subsection -1... $ECHO_C" >&6
+if test "${gcc_cv_as_subsection_m1+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_subsection_m1=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
+ then gcc_cv_as_subsection_m1=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo 'conftest_label1: .word 0
+.subsection -1
+conftest_label2: .word 0
+.previous' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ if test x$gcc_cv_nm != x; then
+ $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
+ $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
+ if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
+ then :
+ else gcc_cv_as_subsection_m1=yes
+ fi
+ rm -f conftest.nm1 conftest.nm2
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_subsection_m1" >&5
+echo "${ECHO_T}$gcc_cv_as_subsection_m1" >&6
+if test $gcc_cv_as_subsection_m1 = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_SUBSECTION_ORDERING 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for .weak" >&5
+echo $ECHO_N "checking assembler for .weak... $ECHO_C" >&6
+if test "${gcc_cv_as_weak+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_weak=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 2 \) \* 1000 + 0`
+ then gcc_cv_as_weak=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .weak foobar' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_weak=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_weak" >&5
+echo "${ECHO_T}$gcc_cv_as_weak" >&6
+if test $gcc_cv_as_weak = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_WEAK 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for .weakref" >&5
+echo $ECHO_N "checking assembler for .weakref... $ECHO_C" >&6
+if test "${gcc_cv_as_weakref+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_weakref=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 17 \) \* 1000 + 0`
+ then gcc_cv_as_weakref=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .weakref foobar, barfnot' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_weakref=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_weakref" >&5
+echo "${ECHO_T}$gcc_cv_as_weakref" >&6
+if test $gcc_cv_as_weakref = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_WEAKREF 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for .nsubspa comdat" >&5
+echo $ECHO_N "checking assembler for .nsubspa comdat... $ECHO_C" >&6
+if test "${gcc_cv_as_nsubspa_comdat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_nsubspa_comdat=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
+ then gcc_cv_as_nsubspa_comdat=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .SPACE $TEXT$
+ .NSUBSPA $CODE$,COMDAT' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_nsubspa_comdat=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_nsubspa_comdat" >&5
+echo "${ECHO_T}$gcc_cv_as_nsubspa_comdat" >&6
+if test $gcc_cv_as_nsubspa_comdat = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_NSUBSPA_COMDAT 1
+_ACEOF
+
+fi
+
+# .hidden needs to be supported in both the assembler and the linker,
+# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
+# This is irritatingly difficult to feature test for; we have to check the
+# date string after the version number. If we've got an in-tree
+# ld, we don't know its patchlevel version, so we set the baseline at 2.13
+# to be safe.
+# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
+echo "$as_me:$LINENO: checking assembler for .hidden" >&5
+echo $ECHO_N "checking assembler for .hidden... $ECHO_C" >&6
+if test "${gcc_cv_as_hidden+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_hidden=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 13 \) \* 1000 + 0`
+ then gcc_cv_as_hidden=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .hidden foobar
+foobar:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_hidden=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_hidden" >&5
+echo "${ECHO_T}$gcc_cv_as_hidden" >&6
+
+
+echo "$as_me:$LINENO: checking linker for .hidden support" >&5
+echo $ECHO_N "checking linker for .hidden support... $ECHO_C" >&6
+if test "${gcc_cv_ld_hidden+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test $in_tree_ld = yes ; then
+ gcc_cv_ld_hidden=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_hidden=yes
+ fi
+else
+ gcc_cv_ld_hidden=yes
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ if test 0"$ld_date" -lt 20020404; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2002-04-04, fail
+ gcc_cv_ld_hidden=no
+ elif test -z "$ld_vers"; then
+ # If there was no date string nor ld version number, something is wrong
+ gcc_cv_ld_hidden=no
+ else
+ test -z "$ld_vers_patch" && ld_vers_patch=0
+ if test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_hidden=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
+ gcc_cv_ld_hidden="no"
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
+ gcc_cv_ld_hidden=no
+ fi
+ fi
+ fi
+ else
+ case "${target}" in
+ hppa64*-*-hpux* | ia64*-*-hpux*)
+ gcc_cv_ld_hidden=yes
+ ;;
+ *)
+ gcc_cv_ld_hidden=no
+ ;;
+ esac
+ fi
+fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_ld_hidden" >&5
+echo "${ECHO_T}$gcc_cv_ld_hidden" >&6
+libgcc_visibility=no
+
+
+if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden = yes; then
+ libgcc_visibility=yes
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_HIDDEN 1
+_ACEOF
+
+fi
+
+# Check if we have .[us]leb128, and support symbol arithmetic with it.
+echo "$as_me:$LINENO: checking assembler for .sleb128 and .uleb128" >&5
+echo $ECHO_N "checking assembler for .sleb128 and .uleb128... $ECHO_C" >&6
+if test "${gcc_cv_as_leb128+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_leb128=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_leb128=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .data
+ .uleb128 L2 - L1
+L1:
+ .uleb128 1280
+ .sleb128 -1010
+L2:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ # GAS versions before 2.11 do not support uleb128,
+ # despite appearing to.
+ # ??? There exists an elf-specific test that will crash
+ # the assembler. Perhaps it's better to figure out whether
+ # arbitrary sections are supported and try the test.
+ as_ver=`$gcc_cv_as --version 2>/dev/null | sed 1q`
+ if echo "$as_ver" | grep GNU > /dev/null; then
+ as_vers=`echo $as_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ as_major=`expr "$as_vers" : '\([0-9]*\)'`
+ as_minor=`expr "$as_vers" : '[0-9]*\.\([0-9]*\)'`
+ if test $as_major -eq 2 && test $as_minor -lt 11
+ then :
+ else gcc_cv_as_leb128=yes
+ fi
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_leb128" >&5
+echo "${ECHO_T}$gcc_cv_as_leb128" >&6
+if test $gcc_cv_as_leb128 = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_LEB128 1
+_ACEOF
+
+fi
+
+# Check if we have assembler support for unwind directives.
+echo "$as_me:$LINENO: checking assembler for cfi directives" >&5
+echo $ECHO_N "checking assembler for cfi directives... $ECHO_C" >&6
+if test "${gcc_cv_as_cfi_directive+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_cfi_directive=no
+ if test x$gcc_cv_as != x; then
+ echo ' .text
+ .cfi_startproc
+ .cfi_offset 0, 0
+ .cfi_same_value 1
+ .cfi_def_cfa 1, 2
+ .cfi_escape 1, 2, 3, 4, 5
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_cfi_directive=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_cfi_directive" >&5
+echo "${ECHO_T}$gcc_cv_as_cfi_directive" >&6
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_CFI_DIRECTIVE `if test $gcc_cv_as_cfi_directive = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking assembler for cfi personality directive" >&5
+echo $ECHO_N "checking assembler for cfi personality directive... $ECHO_C" >&6
+if test "${gcc_cv_as_cfi_personality_directive+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_cfi_personality_directive=no
+ if test x$gcc_cv_as != x; then
+ echo ' .text
+ .cfi_startproc
+ .cfi_personality 0, symbol
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_cfi_personality_directive=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_cfi_personality_directive" >&5
+echo "${ECHO_T}$gcc_cv_as_cfi_personality_directive" >&6
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_CFI_PERSONALITY_DIRECTIVE `if test $gcc_cv_as_cfi_personality_directive = yes;
+ then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# GAS versions up to and including 2.11.0 may mis-optimize
+# .eh_frame data.
+echo "$as_me:$LINENO: checking assembler for eh_frame optimization" >&5
+echo $ECHO_N "checking assembler for eh_frame optimization... $ECHO_C" >&6
+if test "${gcc_cv_as_eh_frame+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_eh_frame=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_eh_frame=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .text
+.LFB1:
+ .4byte 0
+.L1:
+ .4byte 0
+.LFE1:
+ .section .eh_frame,"aw",@progbits
+__FRAME_BEGIN__:
+ .4byte .LECIE1-.LSCIE1
+.LSCIE1:
+ .4byte 0x0
+ .byte 0x1
+ .ascii "z\0"
+ .byte 0x1
+ .byte 0x78
+ .byte 0x1a
+ .byte 0x0
+ .byte 0x4
+ .4byte 1
+ .p2align 1
+.LECIE1:
+.LSFDE1:
+ .4byte .LEFDE1-.LASFDE1
+.LASFDE1:
+ .4byte .LASFDE1-__FRAME_BEGIN__
+ .4byte .LFB1
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .L1-.LFB1
+.LEFDE1:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ cat > conftest.lit <<EOF
+ 0000 10000000 00000000 017a0001 781a0004 .........z..x...
+ 0010 01000000 12000000 18000000 00000000 ................
+ 0020 08000000 04080000 0044 .........D
+EOF
+cat > conftest.big <<EOF
+ 0000 00000010 00000000 017a0001 781a0004 .........z..x...
+ 0010 00000001 00000012 00000018 00000000 ................
+ 0020 00000008 04000000 0844 .........D
+EOF
+ # If the assembler didn't choke, and we can objdump,
+ # and we got the correct data, then succeed.
+ # The text in the here-document typically retains its unix-style line
+ # endings, while the output of objdump will use host line endings.
+ # Therefore, use diff -b for the comparisons.
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
+ | tail -3 > conftest.got \
+ && { diff -b conftest.lit conftest.got > /dev/null 2>&1 \
+ || diff -b conftest.big conftest.got > /dev/null 2>&1; }
+ then
+ gcc_cv_as_eh_frame=yes
+ elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gcc_cv_as_eh_frame=buggy
+ else
+ # Uh oh, what do we do now?
+ gcc_cv_as_eh_frame=no
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_eh_frame" >&5
+echo "${ECHO_T}$gcc_cv_as_eh_frame" >&6
+
+
+if test $gcc_cv_as_eh_frame = buggy; then
+
+cat >>confdefs.h <<\_ACEOF
+#define USE_AS_TRADITIONAL_FORMAT 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for section merging support" >&5
+echo $ECHO_N "checking assembler for section merging support... $ECHO_C" >&6
+if test "${gcc_cv_as_shf_merge+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_shf_merge=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_shf_merge=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_shf_merge=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_shf_merge" >&5
+echo "${ECHO_T}$gcc_cv_as_shf_merge" >&6
+
+if test $gcc_cv_as_shf_merge = no; then
+ echo "$as_me:$LINENO: checking assembler for section merging support" >&5
+echo $ECHO_N "checking assembler for section merging support... $ECHO_C" >&6
+if test "${gcc_cv_as_shf_merge+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_shf_merge=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_shf_merge=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.section .rodata.str, "aMS", %progbits, 1' > conftest.s
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_shf_merge=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_shf_merge" >&5
+echo "${ECHO_T}$gcc_cv_as_shf_merge" >&6
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_SHF_MERGE `if test $gcc_cv_as_shf_merge = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking assembler for COMDAT group support" >&5
+echo $ECHO_N "checking assembler for COMDAT group support... $ECHO_C" >&6
+if test "${gcc_cv_as_comdat_group+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_comdat_group=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 16 \) \* 1000 + 0`
+ then gcc_cv_as_comdat_group=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.section .text,"axG",@progbits,.foo,comdat' > conftest.s
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_comdat_group=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_comdat_group" >&5
+echo "${ECHO_T}$gcc_cv_as_comdat_group" >&6
+
+if test $gcc_cv_as_comdat_group = yes; then
+ gcc_cv_as_comdat_group_percent=no
+else
+ echo "$as_me:$LINENO: checking assembler for COMDAT group support" >&5
+echo $ECHO_N "checking assembler for COMDAT group support... $ECHO_C" >&6
+if test "${gcc_cv_as_comdat_group_percent+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_comdat_group_percent=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 16 \) \* 1000 + 0`
+ then gcc_cv_as_comdat_group_percent=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.section .text,"axG",%progbits,.foo,comdat' > conftest.s
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_comdat_group_percent=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_comdat_group_percent" >&5
+echo "${ECHO_T}$gcc_cv_as_comdat_group_percent" >&6
+
+fi
+if test $in_tree_ld != yes && test x"$ld_vers" != x; then
+ comdat_group=yes
+ if test 0"$ld_date" -lt 20050308; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2005-03-08, fail
+ comdat_group=no
+ elif test "$ld_vers_major" -lt 2; then
+ comdat_group=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
+ comdat_group=no
+ fi
+ fi
+else
+ # assume linkers other than GNU ld don't support COMDAT group
+ comdat_group=no
+fi
+if test $comdat_group = no; then
+ gcc_cv_as_comdat_group=no
+ gcc_cv_as_comdat_group_percent=no
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_COMDAT_GROUP `if test $gcc_cv_as_comdat_group = yes || test $gcc_cv_as_comdat_group_percent = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# Thread-local storage - the check is heavily parametrized.
+conftest_s=
+tls_first_major=
+tls_first_minor=
+tls_as_opt=
+case "$target" in
+ alpha*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ ldq $27,__tls_get_addr($29) !literal!1
+ lda $16,foo($29) !tlsgd!1
+ jsr $26,($27),__tls_get_addr !lituse_tlsgd!1
+ ldq $27,__tls_get_addr($29) !literal!2
+ lda $16,foo($29) !tlsldm!2
+ jsr $26,($27),__tls_get_addr !lituse_tlsldm!2
+ ldq $1,foo($29) !gotdtprel
+ ldah $2,foo($29) !dtprelhi
+ lda $3,foo($2) !dtprello
+ lda $4,foo($29) !dtprel
+ ldq $1,foo($29) !gottprel
+ ldah $2,foo($29) !tprelhi
+ lda $3,foo($2) !tprello
+ lda $4,foo($29) !tprel'
+ tls_first_major=2
+ tls_first_minor=13
+ tls_as_opt=--fatal-warnings
+ ;;
+ frv*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+x: .long 25
+ .text
+ call #gettlsoff(x)'
+ tls_first_major=2
+ tls_first_minor=14
+ ;;
+ hppa*-*-linux*)
+ conftest_s='
+t1: .reg %r20
+t2: .reg %r21
+gp: .reg %r19
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .align 4
+ addil LT%foo-$tls_gdidx$,gp
+ ldo RT%foo-$tls_gdidx$(%r1),%arg0
+ b __tls_get_addr
+ nop
+ addil LT%foo-$tls_ldidx$,gp
+ b __tls_get_addr
+ ldo RT%foo-$tls_ldidx$(%r1),%arg0
+ addil LR%foo-$tls_dtpoff$,%ret0
+ ldo RR%foo-$tls_dtpoff$(%r1),%t1
+ mfctl %cr27,%t1
+ addil LT%foo-$tls_ieoff$,gp
+ ldw RT%foo-$tls_ieoff$(%r1),%t2
+ add %t1,%t2,%t3
+ mfctl %cr27,%t1
+ addil LR%foo-$tls_leoff$,%t1
+ ldo RR%foo-$tls_leoff$(%r1),%t2'
+ tls_first_major=2
+ tls_first_minor=15
+ tls_as_opt=--fatal-warnings
+ ;;
+ arm*-*-*)
+ conftest_s='
+ .section ".tdata","awT",%progbits
+foo: .long 25
+ .text
+.word foo(gottpoff)
+.word foo(tpoff)
+.word foo(tlsgd)
+.word foo(tlsldm)
+.word foo(tlsldo)'
+ tls_first_major=2
+ tls_first_minor=17
+ ;;
+ i[34567]86-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ movl %gs:0, %eax
+ leal foo@TLSGD(,%ebx,1), %eax
+ leal foo@TLSLDM(%ebx), %eax
+ leal foo@DTPOFF(%eax), %edx
+ movl foo@GOTTPOFF(%ebx), %eax
+ subl foo@GOTTPOFF(%ebx), %eax
+ addl foo@GOTNTPOFF(%ebx), %eax
+ movl foo@INDNTPOFF, %eax
+ movl $foo@TPOFF, %eax
+ subl $foo@TPOFF, %eax
+ leal foo@NTPOFF(%ecx), %eax'
+ tls_first_major=2
+ tls_first_minor=14
+ tls_as_opt=--fatal-warnings
+ ;;
+ x86_64-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ movq %fs:0, %rax
+ leaq foo@TLSGD(%rip), %rdi
+ leaq foo@TLSLD(%rip), %rdi
+ leaq foo@DTPOFF(%rax), %rdx
+ movq foo@GOTTPOFF(%rip), %rax
+ movq $foo@TPOFF, %rax'
+ tls_first_major=2
+ tls_first_minor=14
+ tls_as_opt=--fatal-warnings
;;
ia64-*-*)
conftest_s='
tls_first_minor=13
tls_as_opt=--fatal-warnings
;;
+ mips*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ addiu $4, $28, %tlsgd(x)
+ addiu $4, $28, %tlsldm(x)
+ lui $4, %dtprel_hi(x)
+ addiu $4, $4, %dtprel_lo(x)
+ lw $4, %gottprel(x)($28)
+ lui $4, %tprel_hi(x)
+ addiu $4, $4, %tprel_lo(x)'
+ tls_first_major=2
+ tls_first_minor=16
+ tls_as_opt='-32 --fatal-warnings'
+ ;;
powerpc-*-*)
conftest_s='
.section ".tdata","awT",@progbits
;;
sparc*-*-*)
case "$target" in
+ sparc*-sun-solaris2.[56789]*)
+ # TLS was introduced in the Solaris 9 4/04 release but
+ # we do not enable it by default on Solaris 9 either.
+ if test "x$enable_tls" = xyes ; then
+ on_solaris=yes
+ else
+ enable_tls=no;
+ fi
+ ;;
sparc*-sun-solaris2.*)
on_solaris=yes
;;
.section ".tdata",#alloc,#write,#tls
foo: .long 25
.text
- sethi %tgd_hi22(foo), %o0
- add %o0, %tgd_lo10(foo), %o1
- add %l7, %o1, %o0, %tgd_add(foo)
- call __tls_get_addr, %tgd_call(foo)
- sethi %tldm_hi22(foo), %l1
- add %l1, %tldm_lo10(foo), %l2
- add %l7, %l2, %o0, %tldm_add(foo)
- call __tls_get_addr, %tldm_call(foo)
- sethi %tldo_hix22(foo), %l3
- xor %l3, %tldo_lox10(foo), %l4
- add %o0, %l4, %l5, %tldo_add(foo)
- sethi %tie_hi22(foo), %o3
- add %o3, %tie_lo10(foo), %o3
- ld [%l7 + %o3], %o2, %tie_ld(foo)
- add %g7, %o2, %o4, %tie_add(foo)
- sethi %tle_hix22(foo), %l1
- xor %l1, %tle_lox10(foo), %o5
- ld [%g7 + %o5], %o1'
- tls_first_major=0
- tls_first_minor=0
+ sethi %tgd_hi22(foo), %o0
+ add %o0, %tgd_lo10(foo), %o1
+ add %l7, %o1, %o0, %tgd_add(foo)
+ call __tls_get_addr, %tgd_call(foo)
+ sethi %tldm_hi22(foo), %l1
+ add %l1, %tldm_lo10(foo), %l2
+ add %l7, %l2, %o0, %tldm_add(foo)
+ call __tls_get_addr, %tldm_call(foo)
+ sethi %tldo_hix22(foo), %l3
+ xor %l3, %tldo_lox10(foo), %l4
+ add %o0, %l4, %l5, %tldo_add(foo)
+ sethi %tie_hi22(foo), %o3
+ add %o3, %tie_lo10(foo), %o3
+ ld [%l7 + %o3], %o2, %tie_ld(foo)
+ add %g7, %o2, %o4, %tie_add(foo)
+ sethi %tle_hix22(foo), %l1
+ xor %l1, %tle_lox10(foo), %o5
+ ld [%g7 + %o5], %o1'
+ tls_first_major=0
+ tls_first_minor=0
+ else
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ sethi %tgd_hi22(foo), %o0
+ add %o0, %tgd_lo10(foo), %o1
+ add %l7, %o1, %o0, %tgd_add(foo)
+ call __tls_get_addr, %tgd_call(foo)
+ sethi %tldm_hi22(foo), %l1
+ add %l1, %tldm_lo10(foo), %l2
+ add %l7, %l2, %o0, %tldm_add(foo)
+ call __tls_get_addr, %tldm_call(foo)
+ sethi %tldo_hix22(foo), %l3
+ xor %l3, %tldo_lox10(foo), %l4
+ add %o0, %l4, %l5, %tldo_add(foo)
+ sethi %tie_hi22(foo), %o3
+ add %o3, %tie_lo10(foo), %o3
+ ld [%l7 + %o3], %o2, %tie_ld(foo)
+ add %g7, %o2, %o4, %tie_add(foo)
+ sethi %tle_hix22(foo), %l1
+ xor %l1, %tle_lox10(foo), %o5
+ ld [%g7 + %o5], %o1'
+ tls_first_major=2
+ tls_first_minor=14
+ tls_as_opt="-32 --fatal-warnings"
+ fi
+ ;;
+esac
+set_have_as_tls=no
+if test "x$enable_tls" = xno ; then
+ : # TLS explicitly disabled.
+elif test "x$enable_tls" = xyes ; then
+ set_have_as_tls=yes # TLS explicitly enabled.
+elif test -z "$tls_first_major"; then
+ : # If we don't have a check, assume no support.
+else
+ echo "$as_me:$LINENO: checking assembler for thread-local storage support" >&5
+echo $ECHO_N "checking assembler for thread-local storage support... $ECHO_C" >&6
+if test "${gcc_cv_as_tls+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_tls=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( $tls_first_major \* 1000 \) + $tls_first_minor \) \* 1000 + 0`
+ then gcc_cv_as_tls=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $tls_as_opt -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_tls=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_tls" >&5
+echo "${ECHO_T}$gcc_cv_as_tls" >&6
+if test $gcc_cv_as_tls = yes; then
+ set_have_as_tls=yes
+fi
+fi
+if test $set_have_as_tls = yes ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_TLS 1
+_ACEOF
+
+fi
+
+# Target-specific assembler checks.
+
+echo "$as_me:$LINENO: checking linker -Bstatic/-Bdynamic option" >&5
+echo $ECHO_N "checking linker -Bstatic/-Bdynamic option... $ECHO_C" >&6
+gcc_cv_ld_static_dynamic=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10; then
+ gcc_cv_ld_static_dynamic=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -Bstatic/-Bdynamic option
+ if $gcc_cv_ld --help 2>/dev/null | grep -- -Bstatic > /dev/null \
+ && $gcc_cv_ld --help 2>/dev/null | grep -- -Bdynamic > /dev/null; then
+ gcc_cv_ld_static_dynamic=yes
+ fi
+fi
+if test x"$gcc_cv_ld_static_dynamic" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LD_STATIC_DYNAMIC 1
+_ACEOF
+
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_ld_static_dynamic" >&5
+echo "${ECHO_T}$gcc_cv_ld_static_dynamic" >&6
+
+if test x"$demangler_in_ld" = xyes; then
+ echo "$as_me:$LINENO: checking linker --demangle support" >&5
+echo $ECHO_N "checking linker --demangle support... $ECHO_C" >&6
+ gcc_cv_ld_demangle=no
+ if test $in_tree_ld = yes; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 14 -o "$gcc_cv_gld_major_version" -gt 2; then \
+ gcc_cv_ld_demangle=yes
+ fi
+ elif test x$gcc_cv_ld != x -a x"$gnu_ld" = xyes; then
+ # Check if the GNU linker supports --demangle option
+ if $gcc_cv_ld --help 2>/dev/null | grep no-demangle > /dev/null; then
+ gcc_cv_ld_demangle=yes
+ fi
+ fi
+ if test x"$gcc_cv_ld_demangle" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LD_DEMANGLE 1
+_ACEOF
+
+ fi
+ echo "$as_me:$LINENO: result: $gcc_cv_ld_demangle" >&5
+echo "${ECHO_T}$gcc_cv_ld_demangle" >&6
+fi
+
+case "$target" in
+ # All TARGET_ABI_OSF targets.
+ alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
+ echo "$as_me:$LINENO: checking assembler for explicit relocation support" >&5
+echo $ECHO_N "checking assembler for explicit relocation support... $ECHO_C" >&6
+if test "${gcc_cv_as_alpha_explicit_relocs+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_alpha_explicit_relocs=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_alpha_explicit_relocs=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .set nomacro
+ .text
+ extbl $3, $2, $3 !lituse_bytoff!1
+ ldq $2, a($29) !literal!1
+ ldq $4, b($29) !literal!2
+ ldq_u $3, 0($2) !lituse_base!1
+ ldq $27, f($29) !literal!5
+ jsr $26, ($27), f !lituse_jsr!5
+ ldah $29, 0($26) !gpdisp!3
+ lda $0, c($29) !gprel
+ ldah $1, d($29) !gprelhigh
+ lda $1, d($1) !gprellow
+ lda $29, 0($29) !gpdisp!3' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_alpha_explicit_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_alpha_explicit_relocs" >&5
+echo "${ECHO_T}$gcc_cv_as_alpha_explicit_relocs" >&6
+if test $gcc_cv_as_alpha_explicit_relocs = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_EXPLICIT_RELOCS 1
+_ACEOF
+
+fi
+ echo "$as_me:$LINENO: checking assembler for jsrdirect relocation support" >&5
+echo $ECHO_N "checking assembler for jsrdirect relocation support... $ECHO_C" >&6
+if test "${gcc_cv_as_alpha_jsrdirect_relocs+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_alpha_jsrdirect_relocs=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 16 \) \* 1000 + 90`
+ then gcc_cv_as_alpha_jsrdirect_relocs=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .set nomacro
+ .text
+ ldq $27, a($29) !literal!1
+ jsr $26, ($27), a !lituse_jsrdirect!1' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_alpha_jsrdirect_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_alpha_jsrdirect_relocs" >&5
+echo "${ECHO_T}$gcc_cv_as_alpha_jsrdirect_relocs" >&6
+if test $gcc_cv_as_alpha_jsrdirect_relocs = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_JSRDIRECT_RELOCS 1
+_ACEOF
+
+fi
+ ;;
+
+ cris-*-*)
+ echo "$as_me:$LINENO: checking assembler for -no-mul-bug-abort option" >&5
+echo $ECHO_N "checking assembler for -no-mul-bug-abort option... $ECHO_C" >&6
+if test "${gcc_cv_as_cris_no_mul_bug+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_cris_no_mul_bug=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
+ then gcc_cv_as_cris_no_mul_bug=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as -no-mul-bug-abort -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_cris_no_mul_bug=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_cris_no_mul_bug" >&5
+echo "${ECHO_T}$gcc_cv_as_cris_no_mul_bug" >&6
+if test $gcc_cv_as_cris_no_mul_bug = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_NO_MUL_BUG_ABORT_OPTION 1
+_ACEOF
+
+fi
+ ;;
+
+ sparc*-*-*)
+ echo "$as_me:$LINENO: checking assembler for .register" >&5
+echo $ECHO_N "checking assembler for .register... $ECHO_C" >&6
+if test "${gcc_cv_as_sparc_register_op+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_sparc_register_op=no
+ if test x$gcc_cv_as != x; then
+ echo '.register %g2, #scratch' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_sparc_register_op=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_register_op" >&5
+echo "${ECHO_T}$gcc_cv_as_sparc_register_op" >&6
+if test $gcc_cv_as_sparc_register_op = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_REGISTER_PSEUDO_OP 1
+_ACEOF
+
+fi
+
+ echo "$as_me:$LINENO: checking assembler for -relax option" >&5
+echo $ECHO_N "checking assembler for -relax option... $ECHO_C" >&6
+if test "${gcc_cv_as_sparc_relax+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_sparc_relax=no
+ if test x$gcc_cv_as != x; then
+ echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_sparc_relax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_relax" >&5
+echo "${ECHO_T}$gcc_cv_as_sparc_relax" >&6
+if test $gcc_cv_as_sparc_relax = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_RELAX_OPTION 1
+_ACEOF
+
+fi
+
+ echo "$as_me:$LINENO: checking assembler for unaligned pcrel relocs" >&5
+echo $ECHO_N "checking assembler for unaligned pcrel relocs... $ECHO_C" >&6
+if test "${gcc_cv_as_sparc_ua_pcrel+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_sparc_ua_pcrel=no
+ if test x$gcc_cv_as != x; then
+ echo '.text
+foo:
+ nop
+.data
+.align 4
+.byte 0
+.uaword %r_disp32(foo)' > conftest.s
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_sparc_ua_pcrel=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_ua_pcrel" >&5
+echo "${ECHO_T}$gcc_cv_as_sparc_ua_pcrel" >&6
+if test $gcc_cv_as_sparc_ua_pcrel = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_SPARC_UA_PCREL 1
+_ACEOF
+
+
+ echo "$as_me:$LINENO: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
+echo $ECHO_N "checking assembler for unaligned pcrel relocs against hidden symbols... $ECHO_C" >&6
+if test "${gcc_cv_as_sparc_ua_pcrel_hidden+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_sparc_ua_pcrel_hidden=no
+ if test x$gcc_cv_as != x; then
+ echo '.data
+.align 4
+.byte 0x31
+.uaword %r_disp32(foo)
+.byte 0x32, 0x33, 0x34
+.global foo
+.hidden foo
+foo:
+.skip 4' > conftest.s
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
+ | grep ' 31000000 07323334' > /dev/null 2>&1; then
+ if $gcc_cv_objdump -R conftest 2> /dev/null \
+ | grep 'DISP32' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_as_sparc_ua_pcrel_hidden=yes
+ fi
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_ua_pcrel_hidden" >&5
+echo "${ECHO_T}$gcc_cv_as_sparc_ua_pcrel_hidden" >&6
+if test $gcc_cv_as_sparc_ua_pcrel_hidden = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_SPARC_UA_PCREL_HIDDEN 1
+_ACEOF
+
+fi
+
+fi # unaligned pcrel relocs
+
+ echo "$as_me:$LINENO: checking assembler for offsetable %lo()" >&5
+echo $ECHO_N "checking assembler for offsetable %lo()... $ECHO_C" >&6
+if test "${gcc_cv_as_sparc_offsetable_lo10+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_sparc_offsetable_lo10=no
+ if test x$gcc_cv_as != x; then
+ echo '.text
+ or %g1, %lo(ab) + 12, %g1
+ or %g1, %lo(ab + 12), %g1' > conftest.s
+ if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
+ | grep ' 82106000 82106000' > /dev/null 2>&1; then
+ gcc_cv_as_sparc_offsetable_lo10=yes
+ fi
else
- conftest_s='
- .section ".tdata","awT",@progbits
-foo: .long 25
- .text
- sethi %tgd_hi22(foo), %o0
- add %o0, %tgd_lo10(foo), %o1
- add %l7, %o1, %o0, %tgd_add(foo)
- call __tls_get_addr, %tgd_call(foo)
- sethi %tldm_hi22(foo), %l1
- add %l1, %tldm_lo10(foo), %l2
- add %l7, %l2, %o0, %tldm_add(foo)
- call __tls_get_addr, %tldm_call(foo)
- sethi %tldo_hix22(foo), %l3
- xor %l3, %tldo_lox10(foo), %l4
- add %o0, %l4, %l5, %tldo_add(foo)
- sethi %tie_hi22(foo), %o3
- add %o3, %tie_lo10(foo), %o3
- ld [%l7 + %o3], %o2, %tie_ld(foo)
- add %g7, %o2, %o4, %tie_add(foo)
- sethi %tle_hix22(foo), %l1
- xor %l1, %tle_lox10(foo), %o5
- ld [%g7 + %o5], %o1'
- tls_first_major=2
- tls_first_minor=14
- tls_as_opt="-32 --fatal-warnings"
- fi
- ;;
-esac
-if test -z "$tls_first_major"; then
- : # If we don't have a check, assume no support.
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_offsetable_lo10" >&5
+echo "${ECHO_T}$gcc_cv_as_sparc_offsetable_lo10" >&6
+if test $gcc_cv_as_sparc_offsetable_lo10 = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_OFFSETABLE_LO10 1
+_ACEOF
+
+fi
+ ;;
+
+ i[34567]86-*-* | x86_64-*-*)
+ case $target_os in
+ cygwin* | pe | mingw32*)
+ # Used for DWARF 2 in PE
+ echo "$as_me:$LINENO: checking assembler for .secrel32 relocs" >&5
+echo $ECHO_N "checking assembler for .secrel32 relocs... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_pe_secrel32+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$as_me:$LINENO: checking assembler for thread-local storage support" >&5
-echo $ECHO_N "checking assembler for thread-local storage support... $ECHO_C" >&6
-if test "${gcc_cv_as_tls+set}" = set; then
+ gcc_cv_as_ix86_pe_secrel32=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
+ then gcc_cv_as_ix86_pe_secrel32=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.text
+foo: nop
+.data
+ .secrel32 foo' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_ix86_pe_secrel32=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_pe_secrel32" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_pe_secrel32" >&6
+if test $gcc_cv_as_ix86_pe_secrel32 = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_PE_SECREL32_RELOC 1
+_ACEOF
+
+fi
+ ;;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for filds and fists mnemonics" >&5
+echo $ECHO_N "checking assembler for filds and fists mnemonics... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_filds_fists+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_tls=no
+ gcc_cv_as_ix86_filds_fists=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( $tls_first_major \* 1000 \) + $tls_first_minor \) \* 1000 + 0`
- then gcc_cv_as_tls=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
+ then gcc_cv_as_ix86_filds_fists=yes
fi
elif test x$gcc_cv_as != x; then
- echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as $tls_as_opt -o conftest.o conftest.s >&5'
+ echo 'filds mem; fists mem' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_tls=yes
+ gcc_cv_as_ix86_filds_fists=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_tls" >&5
-echo "${ECHO_T}$gcc_cv_as_tls" >&6
-if test $gcc_cv_as_tls = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_filds_fists" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_filds_fists" >&6
+if test $gcc_cv_as_ix86_filds_fists = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_TLS 1
+#define HAVE_GAS_FILDS_FISTS 1
_ACEOF
fi
+
+ echo "$as_me:$LINENO: checking assembler for cmov syntax" >&5
+echo $ECHO_N "checking assembler for cmov syntax... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_cmov_sun_syntax+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_ix86_cmov_sun_syntax=no
+ if test x$gcc_cv_as != x; then
+ echo 'cmovl.l %edx, %eax' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_ix86_cmov_sun_syntax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_cmov_sun_syntax" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_cmov_sun_syntax" >&6
+if test $gcc_cv_as_ix86_cmov_sun_syntax = yes; then
-# Target-specific assembler checks.
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_IX86_CMOV_SUN_SYNTAX 1
+_ACEOF
-if test x"$demangler_in_ld" = xyes; then
- echo "$as_me:$LINENO: checking linker --demangle support" >&5
-echo $ECHO_N "checking linker --demangle support... $ECHO_C" >&6
- gcc_cv_ld_demangle=no
- if test $in_tree_ld = yes; then
- if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 14 -o "$gcc_cv_gld_major_version" -gt 2; then \
- gcc_cv_ld_demangle=yes
+fi
+
+ echo "$as_me:$LINENO: checking assembler for ffreep mnemonic" >&5
+echo $ECHO_N "checking assembler for ffreep mnemonic... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_ffreep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_ix86_ffreep=no
+ if test x$gcc_cv_as != x; then
+ echo 'ffreep %st(1)' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_ix86_ffreep=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
- elif test x$gcc_cv_ld != x -a x"$gnu_ld" = xyes; then
- # Check if the GNU linker supports --demangle option
- if $gcc_cv_ld --help 2>/dev/null | grep no-demangle > /dev/null; then
- gcc_cv_ld_demangle=yes
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_ffreep" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_ffreep" >&6
+if test $gcc_cv_as_ix86_ffreep = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_IX86_FFREEP 1
+_ACEOF
+
+fi
+
+ echo "$as_me:$LINENO: checking assembler for sahf mnemonic" >&5
+echo $ECHO_N "checking assembler for sahf mnemonic... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_sahf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_ix86_sahf=no
+ if test x$gcc_cv_as != x; then
+ echo 'sahf' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_ix86_sahf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
+ rm -f conftest.o conftest.s
fi
- if test x"$gcc_cv_ld_demangle" = xyes; then
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_sahf" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_sahf" >&6
+if test $gcc_cv_as_ix86_sahf = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_LD_DEMANGLE 1
+#define HAVE_AS_IX86_SAHF 1
_ACEOF
+fi
+
+ echo "$as_me:$LINENO: checking assembler for different section symbol subtraction" >&5
+echo $ECHO_N "checking assembler for different section symbol subtraction... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_diff_sect_delta+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_ix86_diff_sect_delta=no
+ if test x$gcc_cv_as != x; then
+ echo '.section .rodata
+.L1:
+ .long .L2-.L1
+ .long .L3-.L1
+ .text
+.L3: nop
+.L2: nop' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_ix86_diff_sect_delta=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
fi
- echo "$as_me:$LINENO: result: $gcc_cv_ld_demangle" >&5
-echo "${ECHO_T}$gcc_cv_ld_demangle" >&6
fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_diff_sect_delta" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_diff_sect_delta" >&6
+if test $gcc_cv_as_ix86_diff_sect_delta = yes; then
-case "$target" in
- # All TARGET_ABI_OSF targets.
- alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
- echo "$as_me:$LINENO: checking assembler for explicit relocation support" >&5
-echo $ECHO_N "checking assembler for explicit relocation support... $ECHO_C" >&6
-if test "${gcc_cv_as_alpha_explicit_relocs+set}" = set; then
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_IX86_DIFF_SECT_DELTA 1
+_ACEOF
+
+fi
+
+ # This one is used unconditionally by i386.[ch]; it is to be defined
+ # to 1 if the feature is present, 0 otherwise.
+ echo "$as_me:$LINENO: checking assembler for GOTOFF in data" >&5
+echo $ECHO_N "checking assembler for GOTOFF in data... $ECHO_C" >&6
+if test "${gcc_cv_as_ix86_gotoff_in_data+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_alpha_explicit_relocs=no
+ gcc_cv_as_ix86_gotoff_in_data=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
- then gcc_cv_as_alpha_explicit_relocs=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_ix86_gotoff_in_data=yes
fi
elif test x$gcc_cv_as != x; then
- echo ' .set nomacro
- .text
- extbl $3, $2, $3 !lituse_bytoff!1
- ldq $2, a($29) !literal!1
- ldq $4, b($29) !literal!2
- ldq_u $3, 0($2) !lituse_base!1
- ldq $27, f($29) !literal!5
- jsr $26, ($27), f !lituse_jsr!5
- ldah $29, 0($26) !gpdisp!3
- lda $0, c($29) !gprel
- ldah $1, d($29) !gprelhigh
- lda $1, d($1) !gprellow
- lda $29, 0($29) !gpdisp!3' > conftest.s
+ echo ' .text
+.L0:
+ nop
+ .data
+ .long .L0@GOTOFF' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_alpha_explicit_relocs=yes
+ gcc_cv_as_ix86_gotoff_in_data=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_alpha_explicit_relocs" >&5
-echo "${ECHO_T}$gcc_cv_as_alpha_explicit_relocs" >&6
-if test $gcc_cv_as_alpha_explicit_relocs = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_gotoff_in_data" >&5
+echo "${ECHO_T}$gcc_cv_as_ix86_gotoff_in_data" >&6
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_EXPLICIT_RELOCS 1
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_GOTOFF_IN_DATA `if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`
_ACEOF
-fi
;;
- cris-*-*)
- echo "$as_me:$LINENO: checking assembler for -no-mul-bug-abort option" >&5
-echo $ECHO_N "checking assembler for -no-mul-bug-abort option... $ECHO_C" >&6
-if test "${gcc_cv_as_cris_no_mul_bug+set}" = set; then
+ ia64*-*-*)
+ echo "$as_me:$LINENO: checking assembler for ltoffx and ldxmov relocs" >&5
+echo $ECHO_N "checking assembler for ltoffx and ldxmov relocs... $ECHO_C" >&6
+if test "${gcc_cv_as_ia64_ltoffx_ldxmov_relocs+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_cris_no_mul_bug=no
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
- then gcc_cv_as_cris_no_mul_bug=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
+ then gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
fi
elif test x$gcc_cv_as != x; then
- echo '.text' > conftest.s
- if { ac_try='$gcc_cv_as -no-mul-bug-abort -o conftest.o conftest.s >&5'
+ echo ' .text
+ addl r15 = @ltoffx(x#), gp
+ ;;
+ ld8.mov r16 = [r15], x#' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_cris_no_mul_bug=yes
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_cris_no_mul_bug" >&5
-echo "${ECHO_T}$gcc_cv_as_cris_no_mul_bug" >&6
-if test $gcc_cv_as_cris_no_mul_bug = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&5
+echo "${ECHO_T}$gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&6
+if test $gcc_cv_as_ia64_ltoffx_ldxmov_relocs = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_NO_MUL_BUG_ABORT_OPTION 1
+#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1
_ACEOF
fi
+
;;
- sparc*-*-*)
- echo "$as_me:$LINENO: checking assembler for .register" >&5
-echo $ECHO_N "checking assembler for .register... $ECHO_C" >&6
-if test "${gcc_cv_as_sparc_register_op+set}" = set; then
+ powerpc*-*-*)
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr5"
+ .csect .text[PR]
+ mfcr 3,128';;
+ *-*-darwin*)
+ echo "$as_me:$LINENO: checking assembler for .machine directive support" >&5
+echo $ECHO_N "checking assembler for .machine directive support... $ECHO_C" >&6
+if test "${gcc_cv_as_machine_directive+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_sparc_register_op=no
+ gcc_cv_as_machine_directive=no
if test x$gcc_cv_as != x; then
- echo '.register %g2, #scratch' > conftest.s
+ echo ' .machine ppc7400' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_sparc_register_op=yes
+ gcc_cv_as_machine_directive=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_register_op" >&5
-echo "${ECHO_T}$gcc_cv_as_sparc_register_op" >&6
-if test $gcc_cv_as_sparc_register_op = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_machine_directive" >&5
+echo "${ECHO_T}$gcc_cv_as_machine_directive" >&6
+
+ if test x$gcc_cv_as_machine_directive != xyes; then
+ echo "*** This target requires an assembler supporting \".machine\"" >&2
+ echo you can get it from: ftp://gcc.gnu.org/pub/gcc/infrastructure/cctools-528.5.dmg >&2
+ test x$build = x$target && exit 1
+ fi
+ conftest_s=' .text
+ mfcr r3,128';;
+ *) conftest_s=' .machine power4
+ .text
+ mfcr 3,128';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for mfcr field support" >&5
+echo $ECHO_N "checking assembler for mfcr field support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_mfcrf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_powerpc_mfcrf=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_mfcrf=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_powerpc_mfcrf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_mfcrf" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_mfcrf" >&6
+if test $gcc_cv_as_powerpc_mfcrf = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_REGISTER_PSEUDO_OP 1
+#define HAVE_AS_MFCRF 1
_ACEOF
fi
- echo "$as_me:$LINENO: checking assembler for -relax option" >&5
-echo $ECHO_N "checking assembler for -relax option... $ECHO_C" >&6
-if test "${gcc_cv_as_sparc_relax+set}" = set; then
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr5"
+ .csect .text[PR]
+ popcntb 3,3';;
+ *) conftest_s=' .machine power5
+ .text
+ popcntb 3,3';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for popcntb support" >&5
+echo $ECHO_N "checking assembler for popcntb support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_popcntb+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_sparc_relax=no
- if test x$gcc_cv_as != x; then
- echo '.text' > conftest.s
- if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'
+ gcc_cv_as_powerpc_popcntb=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 17 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_popcntb=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_sparc_relax=yes
+ gcc_cv_as_powerpc_popcntb=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_relax" >&5
-echo "${ECHO_T}$gcc_cv_as_sparc_relax" >&6
-if test $gcc_cv_as_sparc_relax = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_popcntb" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_popcntb" >&6
+if test $gcc_cv_as_powerpc_popcntb = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_RELAX_OPTION 1
+#define HAVE_AS_POPCNTB 1
_ACEOF
fi
- echo "$as_me:$LINENO: checking assembler for unaligned pcrel relocs" >&5
-echo $ECHO_N "checking assembler for unaligned pcrel relocs... $ECHO_C" >&6
-if test "${gcc_cv_as_sparc_ua_pcrel+set}" = set; then
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr5x"
+ .csect .text[PR]
+ frin 1,1';;
+ *) conftest_s=' .machine power5
+ .text
+ frin 1,1';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for fp round support" >&5
+echo $ECHO_N "checking assembler for fp round support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_fprnd+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_sparc_ua_pcrel=no
- if test x$gcc_cv_as != x; then
- echo '.text
-foo:
- nop
-.data
-.align 4
-.byte 0
-.uaword %r_disp32(foo)' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'
+ gcc_cv_as_powerpc_fprnd=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 17 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_fprnd=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- if test x$gcc_cv_ld != x \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
- gcc_cv_as_sparc_ua_pcrel=yes
- fi
- rm -f conftest
+ gcc_cv_as_powerpc_fprnd=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_ua_pcrel" >&5
-echo "${ECHO_T}$gcc_cv_as_sparc_ua_pcrel" >&6
-if test $gcc_cv_as_sparc_ua_pcrel = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_fprnd" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_fprnd" >&6
+if test $gcc_cv_as_powerpc_fprnd = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_SPARC_UA_PCREL 1
+#define HAVE_AS_FPRND 1
_ACEOF
+fi
- echo "$as_me:$LINENO: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
-echo $ECHO_N "checking assembler for unaligned pcrel relocs against hidden symbols... $ECHO_C" >&6
-if test "${gcc_cv_as_sparc_ua_pcrel_hidden+set}" = set; then
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr6"
+ .csect .text[PR]
+ mffgpr 1,3';;
+ *) conftest_s=' .machine power6
+ .text
+ mffgpr 1,3';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for move fp gpr support" >&5
+echo $ECHO_N "checking assembler for move fp gpr support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_mfpgpr+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_sparc_ua_pcrel_hidden=no
- if test x$gcc_cv_as != x; then
- echo '.data
-.align 4
-.byte 0x31
-.uaword %r_disp32(foo)
-.byte 0x32, 0x33, 0x34
-.global foo
-.hidden foo
-foo:
-.skip 4' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'
+ gcc_cv_as_powerpc_mfpgpr=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 9 \* 1000 \) + 99 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_mfpgpr=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
- && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
- | grep ' 31000000 07323334' > /dev/null 2>&1; then
- if $gcc_cv_objdump -R conftest 2> /dev/null \
- | grep 'DISP32' > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_sparc_ua_pcrel_hidden=yes
- fi
- fi
- rm -f conftest
+ gcc_cv_as_powerpc_mfpgpr=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_ua_pcrel_hidden" >&5
-echo "${ECHO_T}$gcc_cv_as_sparc_ua_pcrel_hidden" >&6
-if test $gcc_cv_as_sparc_ua_pcrel_hidden = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_mfpgpr" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_mfpgpr" >&6
+if test $gcc_cv_as_powerpc_mfpgpr = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_SPARC_UA_PCREL_HIDDEN 1
+#define HAVE_AS_MFPGPR 1
_ACEOF
fi
-fi # unaligned pcrel relocs
+ case $target in
+ *-*-aix*) conftest_s=' .csect .text[PR]
+LCF..0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-LCF..0@ha';;
+ *-*-darwin*)
+ conftest_s=' .text
+LCF0:
+ addis r11,r30,_GLOBAL_OFFSET_TABLE_-LCF0@ha';;
+ *) conftest_s=' .text
+.LCF0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-.LCF0@ha';;
+ esac
- echo "$as_me:$LINENO: checking assembler for offsetable %lo()" >&5
-echo $ECHO_N "checking assembler for offsetable %lo()... $ECHO_C" >&6
-if test "${gcc_cv_as_sparc_offsetable_lo10+set}" = set; then
+ echo "$as_me:$LINENO: checking assembler for rel16 relocs" >&5
+echo $ECHO_N "checking assembler for rel16 relocs... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_rel16+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_sparc_offsetable_lo10=no
- if test x$gcc_cv_as != x; then
- echo '.text
- or %g1, %lo(ab) + 12, %g1
- or %g1, %lo(ab + 12), %g1' > conftest.s
- if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'
+ gcc_cv_as_powerpc_rel16=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 17 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_rel16=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -a32 -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- if test x$gcc_cv_objdump != x \
- && $gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
- | grep ' 82106000 82106000' > /dev/null 2>&1; then
- gcc_cv_as_offsetable_lo10=yes
- fi
+ gcc_cv_as_powerpc_rel16=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_sparc_offsetable_lo10" >&5
-echo "${ECHO_T}$gcc_cv_as_sparc_offsetable_lo10" >&6
-if test $gcc_cv_as_sparc_offsetable_lo10 = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_rel16" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_rel16" >&6
+if test $gcc_cv_as_powerpc_rel16 = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_OFFSETABLE_LO10 1
+#define HAVE_AS_REL16 1
_ACEOF
fi
- ;;
- i[34567]86-*-* | x86_64-*-*)
- case $target_os in
- cygwin* | pe | mingw32*)
- # Used for DWARF 2 in PE
- echo "$as_me:$LINENO: checking assembler for .secrel32 relocs" >&5
-echo $ECHO_N "checking assembler for .secrel32 relocs... $ECHO_C" >&6
-if test "${gcc_cv_as_ix86_pe_secrel32+set}" = set; then
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr6"
+ .csect .text[PR]
+ cmpb 3,4,5';;
+ *) conftest_s=' .machine power6
+ .text
+ cmpb 3,4,5';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for compare bytes support" >&5
+echo $ECHO_N "checking assembler for compare bytes support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_cmpb+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_ix86_pe_secrel32=no
+ gcc_cv_as_powerpc_cmpb=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 15 \) \* 1000 + 91`
- then gcc_cv_as_ix86_pe_secrel32=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 9 \* 1000 \) + 99 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_cmpb=yes
fi
- elif test x$gcc_cv_as != x; then
- echo '.text
-foo: nop
-.data
- .secrel32 foo' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -a32 -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- if test x$gcc_cv_ld != x \
- && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1; then
- gcc_cv_as_ix86_pe_secrel32=yes
- fi
- rm -f conftest
+ gcc_cv_as_powerpc_cmpb=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_pe_secrel32" >&5
-echo "${ECHO_T}$gcc_cv_as_ix86_pe_secrel32" >&6
-if test $gcc_cv_as_ix86_pe_secrel32 = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_cmpb" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_cmpb" >&6
+if test $gcc_cv_as_powerpc_cmpb = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_PE_SECREL32_RELOC 1
+#define HAVE_AS_CMPB 1
_ACEOF
fi
- ;;
+
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr6"
+ .csect .text[PR]
+ dadd 1,2,3';;
+ *) conftest_s=' .machine power6
+ .text
+ dadd 1,2,3';;
esac
- echo "$as_me:$LINENO: checking assembler for filds and fists mnemonics" >&5
-echo $ECHO_N "checking assembler for filds and fists mnemonics... $ECHO_C" >&6
-if test "${gcc_cv_as_ix86_filds_fists+set}" = set; then
+ echo "$as_me:$LINENO: checking assembler for decimal float support" >&5
+echo $ECHO_N "checking assembler for decimal float support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_dfp+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_ix86_filds_fists=no
+ gcc_cv_as_powerpc_dfp=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
- then gcc_cv_as_ix86_filds_fists=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 9 \* 1000 \) + 99 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_dfp=yes
fi
elif test x$gcc_cv_as != x; then
- echo 'filds mem; fists mem' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -a32 -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_ix86_filds_fists=yes
+ gcc_cv_as_powerpc_dfp=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_filds_fists" >&5
-echo "${ECHO_T}$gcc_cv_as_ix86_filds_fists" >&6
-if test $gcc_cv_as_ix86_filds_fists = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_dfp" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_dfp" >&6
+if test $gcc_cv_as_powerpc_dfp = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_GAS_FILDS_FISTS 1
+#define HAVE_AS_DFP 1
_ACEOF
fi
- echo "$as_me:$LINENO: checking assembler for cmov syntax" >&5
-echo $ECHO_N "checking assembler for cmov syntax... $ECHO_C" >&6
-if test "${gcc_cv_as_ix86_cmov_sun_syntax+set}" = set; then
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr7"
+ .csect .text[PR]
+ lxvd2x 1,2,3';;
+ *) conftest_s=' .machine power7
+ .text
+ lxvd2x 1,2,3';;
+ esac
+
+ echo "$as_me:$LINENO: checking assembler for vector-scalar support" >&5
+echo $ECHO_N "checking assembler for vector-scalar support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_vsx+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_ix86_cmov_sun_syntax=no
- if test x$gcc_cv_as != x; then
- echo 'cmovl.l %edx, %eax' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ gcc_cv_as_powerpc_vsx=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 9 \* 1000 \) + 99 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_vsx=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -a32 -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_ix86_cmov_sun_syntax=yes
+ gcc_cv_as_powerpc_vsx=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_cmov_sun_syntax" >&5
-echo "${ECHO_T}$gcc_cv_as_ix86_cmov_sun_syntax" >&6
-if test $gcc_cv_as_ix86_cmov_sun_syntax = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_vsx" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_vsx" >&6
+if test $gcc_cv_as_powerpc_vsx = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_IX86_CMOV_SUN_SYNTAX 1
+#define HAVE_AS_VSX 1
_ACEOF
fi
- # This one is used unconditionally by i386.[ch]; it is to be defined
- # to 1 if the feature is present, 0 otherwise.
- echo "$as_me:$LINENO: checking assembler for GOTOFF in data" >&5
-echo $ECHO_N "checking assembler for GOTOFF in data... $ECHO_C" >&6
-if test "${gcc_cv_as_ix86_gotoff_in_data+set}" = set; then
+ echo "$as_me:$LINENO: checking assembler for .gnu_attribute support" >&5
+echo $ECHO_N "checking assembler for .gnu_attribute support... $ECHO_C" >&6
+if test "${gcc_cv_as_powerpc_gnu_attribute+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_ix86_gotoff_in_data=no
+ gcc_cv_as_powerpc_gnu_attribute=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
- then gcc_cv_as_ix86_gotoff_in_data=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 18 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_gnu_attribute=yes
fi
elif test x$gcc_cv_as != x; then
- echo ' .text
-.L0:
- nop
- .data
- .long .L0@GOTOFF' > conftest.s
+ echo '.gnu_attribute 4,1' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_ix86_gotoff_in_data=yes
+ gcc_cv_as_powerpc_gnu_attribute=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_ix86_gotoff_in_data" >&5
-echo "${ECHO_T}$gcc_cv_as_ix86_gotoff_in_data" >&6
-
+echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_gnu_attribute" >&5
+echo "${ECHO_T}$gcc_cv_as_powerpc_gnu_attribute" >&6
+if test $gcc_cv_as_powerpc_gnu_attribute = yes; then
-cat >>confdefs.h <<_ACEOF
-#define HAVE_AS_GOTOFF_IN_DATA `if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_GNU_ATTRIBUTE 1
_ACEOF
+fi
;;
- ia64*-*-*)
- echo "$as_me:$LINENO: checking assembler for ltoffx and ldxmov relocs" >&5
-echo $ECHO_N "checking assembler for ltoffx and ldxmov relocs... $ECHO_C" >&6
-if test "${gcc_cv_as_ia64_ltoffx_ldxmov_relocs+set}" = set; then
+ mips*-*-*)
+ echo "$as_me:$LINENO: checking assembler for explicit relocation support" >&5
+echo $ECHO_N "checking assembler for explicit relocation support... $ECHO_C" >&6
+if test "${gcc_cv_as_mips_explicit_relocs+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_ia64_ltoffx_ldxmov_relocs=no
+ gcc_cv_as_mips_explicit_relocs=no
if test $in_tree_gas = yes; then
if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
- then gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
+ then gcc_cv_as_mips_explicit_relocs=yes
fi
elif test x$gcc_cv_as != x; then
- echo ' .text
- addl r15 = @ltoffx(x#), gp
- ;;
- ld8.mov r16 = [r15], x#' > conftest.s
+ echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
+ gcc_cv_as_mips_explicit_relocs=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&5
-echo "${ECHO_T}$gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&6
-if test $gcc_cv_as_ia64_ltoffx_ldxmov_relocs = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_mips_explicit_relocs" >&5
+echo "${ECHO_T}$gcc_cv_as_mips_explicit_relocs" >&6
+if test $gcc_cv_as_mips_explicit_relocs = yes; then
+ if test x$target_cpu_default = x
+ then target_cpu_default=MASK_EXPLICIT_RELOCS
+ else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
+ fi
+fi
+ echo "$as_me:$LINENO: checking assembler for -mno-shared support" >&5
+echo $ECHO_N "checking assembler for -mno-shared support... $ECHO_C" >&6
+if test "${gcc_cv_as_mips_no_shared+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_mips_no_shared=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 16 \) \* 1000 + 0`
+ then gcc_cv_as_mips_no_shared=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo 'nop' > conftest.s
+ if { ac_try='$gcc_cv_as -mno-shared -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_mips_no_shared=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_mips_no_shared" >&5
+echo "${ECHO_T}$gcc_cv_as_mips_no_shared" >&6
+if test $gcc_cv_as_mips_no_shared = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1
+#define HAVE_AS_NO_SHARED 1
_ACEOF
fi
- ;;
-
- powerpc*-*-*)
- case $target in
- *-*-aix*) conftest_s=' .csect .text[PR]
- mfcr 3,128';;
- *-*-darwin*) conftest_s=' .text
- mfcr r3,128';;
- *) conftest_s=' .machine power4
- .text
- mfcr 3,128';;
- esac
-
- echo "$as_me:$LINENO: checking assembler for mfcr field support" >&5
-echo $ECHO_N "checking assembler for mfcr field support... $ECHO_C" >&6
-if test "${gcc_cv_as_powerpc_mfcrf+set}" = set; then
+ echo "$as_me:$LINENO: checking assembler for .gnu_attribute support" >&5
+echo $ECHO_N "checking assembler for .gnu_attribute support... $ECHO_C" >&6
+if test "${gcc_cv_as_mips_gnu_attribute+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_powerpc_mfcrf=no
+ gcc_cv_as_mips_gnu_attribute=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
- then gcc_cv_as_powerpc_mfcrf=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 18 \) \* 1000 + 0`
+ then gcc_cv_as_mips_gnu_attribute=yes
fi
elif test x$gcc_cv_as != x; then
- echo "$conftest_s" > conftest.s
+ echo '.gnu_attribute 4,1' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_powerpc_mfcrf=yes
+ gcc_cv_as_mips_gnu_attribute=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_powerpc_mfcrf" >&5
-echo "${ECHO_T}$gcc_cv_as_powerpc_mfcrf" >&6
-if test $gcc_cv_as_powerpc_mfcrf = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_mips_gnu_attribute" >&5
+echo "${ECHO_T}$gcc_cv_as_mips_gnu_attribute" >&6
+if test $gcc_cv_as_mips_gnu_attribute = yes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_MFCRF 1
+#define HAVE_AS_GNU_ATTRIBUTE 1
_ACEOF
fi
- ;;
- mips*-*-*)
- echo "$as_me:$LINENO: checking assembler for explicit relocation support" >&5
-echo $ECHO_N "checking assembler for explicit relocation support... $ECHO_C" >&6
-if test "${gcc_cv_as_mips_explicit_relocs+set}" = set; then
+ echo "$as_me:$LINENO: checking assembler for .dtprelword support" >&5
+echo $ECHO_N "checking assembler for .dtprelword support... $ECHO_C" >&6
+if test "${gcc_cv_as_mips_dtprelword+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gcc_cv_as_mips_explicit_relocs=no
+ gcc_cv_as_mips_dtprelword=no
if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
- then gcc_cv_as_mips_explicit_relocs=yes
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 18 \) \* 1000 + 0`
+ then gcc_cv_as_mips_dtprelword=yes
fi
elif test x$gcc_cv_as != x; then
- echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
+ echo '.section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ .dtprelword x+0x8000' > conftest.s
if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- gcc_cv_as_mips_explicit_relocs=yes
+ gcc_cv_as_mips_dtprelword=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
rm -f conftest.o conftest.s
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_mips_explicit_relocs" >&5
-echo "${ECHO_T}$gcc_cv_as_mips_explicit_relocs" >&6
-if test $gcc_cv_as_mips_explicit_relocs = yes; then
- if test x$target_cpu_default = x
- then target_cpu_default=MASK_EXPLICIT_RELOCS
- else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
- fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_mips_dtprelword" >&5
+echo "${ECHO_T}$gcc_cv_as_mips_dtprelword" >&6
+if test $gcc_cv_as_mips_dtprelword = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_DTPRELWORD 1
+_ACEOF
+
fi
+ ;;
+esac
+
+# Mips and HP-UX need the GNU assembler.
+# Linux on IA64 might be able to use the Intel assembler.
+case "$target" in
+ mips*-*-* | *-*-hpux* )
if test x$gas_flag = xyes \
|| test x"$host" != x"$build" \
|| test ! -x "$gcc_cv_as" \
fi
;;
esac
+
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# info to the output file. So, as supported targets are added to gas 2.11,
# version to the per-target configury.
case "$target" in
i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-* | m68*-*-* \
- | x86_64*-*-* | hppa*-*-* | arm*-*-* | strongarm*-*-* | xscale*-*-* \
- | xstormy16*-*-* | cris-*-* | xtensa-*-*)
+ | x86_64*-*-* | hppa*-*-* | arm*-*-* \
+ | xstormy16*-*-* | cris-*-* | xtensa*-*-* | bfin-*-* | score*-*-* \
+ | spu-*-* | fido*-*-*)
insn="nop"
;;
ia64*-*-* | s390*-*-*)
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }
then
- # ??? This fails with non-gnu grep. Maybe use objdump?
- if grep debug_line conftest.o > /dev/null 2>&1; then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -h conftest.o 2> /dev/null \
+ | grep debug_line > /dev/null 2>&1; then
gcc_cv_as_dwarf2_debug_line=yes
fi
else
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
+ (exit $ac_status); }; }
+ then
+ # The native Solaris 9/Intel assembler doesn't understand --gstabs
+ # and warns about it, but still exits successfully. So check for
+ # this.
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then :
+ else gcc_cv_as_gstabs_flag=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_gstabs_flag" >&5
+echo "${ECHO_T}$gcc_cv_as_gstabs_flag" >&6
+if test $gcc_cv_as_gstabs_flag = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_GSTABS_DEBUG_FLAG 1
+_ACEOF
+
+fi
+
+ echo "$as_me:$LINENO: checking assembler for --debug-prefix-map option" >&5
+echo $ECHO_N "checking assembler for --debug-prefix-map option... $ECHO_C" >&6
+if test "${gcc_cv_as_debug_prefix_map_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_debug_prefix_map_flag=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 18 \) \* 1000 + 0`
+ then gcc_cv_as_debug_prefix_map_flag=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as --debug-prefix-map /a=/b -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_debug_prefix_map_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_debug_prefix_map_flag" >&5
+echo "${ECHO_T}$gcc_cv_as_debug_prefix_map_flag" >&6
+if test $gcc_cv_as_debug_prefix_map_flag = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_DEBUG_PREFIX_MAP 1
+_ACEOF
+
+fi
+fi
+
+echo "$as_me:$LINENO: checking assembler for .lcomm with alignment" >&5
+echo $ECHO_N "checking assembler for .lcomm with alignment... $ECHO_C" >&6
+if test "${gcc_cv_as_lcomm_with_alignment+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_lcomm_with_alignment=no
+ if test x$gcc_cv_as != x; then
+ echo '.lcomm bar,4,16' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }
+ then
+ gcc_cv_as_lcomm_with_alignment=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_as_lcomm_with_alignment" >&5
+echo "${ECHO_T}$gcc_cv_as_lcomm_with_alignment" >&6
+if test $gcc_cv_as_lcomm_with_alignment = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GAS_LCOMM_WITH_ALIGNMENT 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking assembler for tolerance to line number 0" >&5
+echo $ECHO_N "checking assembler for tolerance to line number 0... $ECHO_C" >&6
+if test "${gcc_cv_as_line_zero+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_as_line_zero=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 16 \) \* 1000 + 91`
+ then gcc_cv_as_line_zero=yes
+fi
+ elif test "x$gcc_cv_as" != x; then
+ { echo '# 1 "test.s" 1'; echo '# 0 "" 2'; } > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5 2>conftest.out'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ test "x`cat conftest.out`" = x
then
- # The native Solaris 9/Intel assembler doesn't understand --gstabs
- # and warns about it, but still exits successfully. So check for
- # this.
- if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }
- then :
- else gcc_cv_as_gstabs_flag=yes
- fi
+ gcc_cv_as_line_zero=yes
else
echo "configure: failed program was" >&5
cat conftest.s >&5
+ echo "configure: error output was" >&5
+ cat conftest.out >&5
fi
- rm -f conftest.o conftest.s
+ rm -f conftest.o conftest.s conftest.out
fi
fi
-echo "$as_me:$LINENO: result: $gcc_cv_as_gstabs_flag" >&5
-echo "${ECHO_T}$gcc_cv_as_gstabs_flag" >&6
-if test $gcc_cv_as_gstabs_flag = yes; then
+echo "$as_me:$LINENO: result: $gcc_cv_as_line_zero" >&5
+echo "${ECHO_T}$gcc_cv_as_line_zero" >&6
+if test "x$gcc_cv_as_line_zero" = xyes; then
cat >>confdefs.h <<\_ACEOF
-#define HAVE_AS_GSTABS_DEBUG_FLAG 1
+#define HAVE_AS_LINE_ZERO 1
_ACEOF
fi
-fi
echo "$as_me:$LINENO: checking linker read-only and read-write section mixing" >&5
echo $ECHO_N "checking linker read-only and read-write section mixing... $ECHO_C" >&6
gcc_cv_ld_eh_frame_hdr=yes
fi
fi
+
if test x"$gcc_cv_ld_eh_frame_hdr" = xyes; then
cat >>confdefs.h <<\_ACEOF
echo "$as_me:$LINENO: result: $gcc_cv_ld_pie" >&5
echo "${ECHO_T}$gcc_cv_ld_pie" >&6
+echo "$as_me:$LINENO: checking linker EH-compatible garbage collection of sections" >&5
+echo $ECHO_N "checking linker EH-compatible garbage collection of sections... $ECHO_C" >&6
+gcc_cv_ld_eh_gc_sections=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 17 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .text.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ # If no COMDAT groups, the compiler will emit .gnu.linkonce.t. sections.
+ if test x$gcc_cv_as_comdat_group != xyes; then
+ gcc_cv_ld_eh_gc_sections=no
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .gnu.linkonce.t.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+ fi
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+case "$target" in
+ hppa*-*-linux*)
+ # ??? This apparently exposes a binutils bug with PC-relative relocations.
+ gcc_cv_ld_eh_gc_sections=no
+ ;;
+esac
+if test x$gcc_cv_ld_eh_gc_sections = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LD_EH_GC_SECTIONS 1
+_ACEOF
+
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_ld_eh_gc_sections" >&5
+echo "${ECHO_T}$gcc_cv_ld_eh_gc_sections" >&6
+
# --------
# UNSORTED
# --------
fi
-case "$target" in
- powerpc64*-*-linux*)
+case "$target:$tm_file" in
+ powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
echo "$as_me:$LINENO: checking linker support for omitting dot symbols" >&5
echo $ECHO_N "checking linker support for omitting dot symbols... $ECHO_C" >&6
if test "${gcc_cv_ld_no_dot_syms+set}" = set; then
;;
esac
+echo "$as_me:$LINENO: checking linker --sysroot support" >&5
+echo $ECHO_N "checking linker --sysroot support... $ECHO_C" >&6
+if test "${gcc_cv_ld_sysroot+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_ld_sysroot=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 ; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --help 2>/dev/null | grep sysroot > /dev/null; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_ld_sysroot" >&5
+echo "${ECHO_T}$gcc_cv_ld_sysroot" >&6
+if test x"$gcc_cv_ld_sysroot" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LD_SYSROOT 1
+_ACEOF
+
+fi
+
if test x$with_sysroot = x && test x$host = x$target \
- && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" ; then
+ && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" \
+ && test "$prefix" != "NONE"; then
cat >>confdefs.h <<_ACEOF
#define PREFIX_INCLUDE_DIR "$prefix/include"
fi
+# Test for stack protector support in target C library.
+echo "$as_me:$LINENO: checking __stack_chk_fail in target C library" >&5
+echo $ECHO_N "checking __stack_chk_fail in target C library... $ECHO_C" >&6
+if test "${gcc_cv_libc_provides_ssp+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gcc_cv_libc_provides_ssp=no
+ case "$target" in
+ *-*-linux*)
+ if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x; then
+ if test "x$with_sysroot" = x; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-include"
+ elif test "x$with_build_sysroot" != "x"; then
+ glibc_header_dir="${with_build_sysroot}/usr/include"
+ elif test "x$with_sysroot" = xyes; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-root/usr/include"
+ else
+ glibc_header_dir="${with_sysroot}/usr/include"
+ fi
+ else
+ glibc_header_dir=/usr/include
+ fi
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+ if test -f $glibc_header_dir/features.h \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__GNU_LIBRARY__[ ]+([1-9][0-9]|[6-9])' \
+ $glibc_header_dir/features.h > /dev/null; then
+ if $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+([1-9][0-9]|[3-9])' \
+ $glibc_header_dir/features.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ elif $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+2' \
+ $glibc_header_dir/features.h > /dev/null \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC_MINOR__[ ]+([1-9][0-9]|[4-9])' \
+ $glibc_header_dir/features.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ elif $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC__[ ]+1' \
+ $glibc_header_dir/features.h > /dev/null && \
+ test -f $glibc_header_dir/bits/uClibc_config.h && \
+ $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC_HAS_SSP__[ ]+1' \
+ $glibc_header_dir/bits/uClibc_config.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ fi
+ fi
+ ;;
+ *-*-darwin*)
+ echo "$as_me:$LINENO: checking for __stack_chk_fail" >&5
+echo $ECHO_N "checking for __stack_chk_fail... $ECHO_C" >&6
+if test "${ac_cv_func___stack_chk_fail+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define __stack_chk_fail to an innocuous variant, in case <limits.h> declares __stack_chk_fail.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define __stack_chk_fail innocuous___stack_chk_fail
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char __stack_chk_fail (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef __stack_chk_fail
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char __stack_chk_fail ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub___stack_chk_fail) || defined (__stub_____stack_chk_fail)
+choke me
+#else
+char (*f) () = __stack_chk_fail;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != __stack_chk_fail;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func___stack_chk_fail=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func___stack_chk_fail=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func___stack_chk_fail" >&5
+echo "${ECHO_T}$ac_cv_func___stack_chk_fail" >&6
+if test $ac_cv_func___stack_chk_fail = yes; then
+ gcc_cv_libc_provides_ssp=yes
+else
+ echo "no __stack_chk_fail on this target"
+fi
+
+ ;;
+ *) gcc_cv_libc_provides_ssp=no ;;
+ esac
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_libc_provides_ssp" >&5
+echo "${ECHO_T}$gcc_cv_libc_provides_ssp" >&6
+
+if test x$gcc_cv_libc_provides_ssp = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TARGET_LIBC_PROVIDES_SSP 1
+_ACEOF
+
+fi
+
+# Check if TFmode long double should be used by default or not.
+# Some glibc targets used DFmode long double, but with glibc 2.4
+# and later they can use TFmode.
+case "$target" in
+ powerpc*-*-linux* | \
+ powerpc*-*-gnu* | \
+ sparc*-*-linux* | \
+ s390*-*-linux* | \
+ alpha*-*-linux*)
+
+# Check whether --with-long-double-128 or --without-long-double-128 was given.
+if test "${with_long_double_128+set}" = set; then
+ withval="$with_long_double_128"
+ gcc_cv_target_ldbl128="$with_long_double_128"
+else
+ gcc_cv_target_ldbl128=no
+ if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x; then
+ if test "x$with_sysroot" = x; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-include"
+ elif test "x$with_build_sysroot" != "x"; then
+ glibc_header_dir="${with_build_sysroot}/usr/include"
+ elif test "x$with_sysroot" = xyes; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-root/usr/include"
+ else
+ glibc_header_dir="${with_sysroot}/usr/include"
+ fi
+ else
+ glibc_header_dir=/usr/include
+ fi
+ grep '^[ ]*#[ ]*define[ ][ ]*__LONG_DOUBLE_MATH_OPTIONAL' \
+ $glibc_header_dir/bits/wordsize.h > /dev/null 2>&1 \
+ && gcc_cv_target_ldbl128=yes
+
+fi;
+ ;;
+esac
+if test x$gcc_cv_target_ldbl128 = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TARGET_DEFAULT_LONG_DOUBLE_128 1
+_ACEOF
+
+fi
+
# Find out what GC implementation we want, or may, use.
# Check whether --with-gc or --without-gc was given.
if test "${with_gc+set}" = set; then
withval="$with_gc"
case "$withval" in
- page | zone)
+ page)
+ GGC=ggc-$withval
+ ;;
+ zone)
GGC=ggc-$withval
+
+cat >>confdefs.h <<\_ACEOF
+#define GGC_ZONE 1
+_ACEOF
+
;;
*)
{ { echo "$as_me:$LINENO: error: $withval is an invalid option to --with-gc" >&5
# Make empty files to contain the specs and options for each language.
# Then add #include lines to for a compiler that has specs and/or options.
+subdirs=
lang_opt_files=
lang_specs_files=
lang_tree_files=
-for subdir in . $subdirs
-do
- if test -f $srcdir/$subdir/lang.opt; then
- lang_opt_files="$lang_opt_files $srcdir/$subdir/lang.opt"
- fi
- if test -f $srcdir/$subdir/lang-specs.h; then
- lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h"
- fi
- if test -f $srcdir/$subdir/$subdir-tree.def; then
- lang_tree_files="$lang_tree_files $srcdir/$subdir/$subdir-tree.def"
- fi
-done
-
# These (without "all_") are set in each config-lang.in.
# `language' must be a single word so is spelled singularly.
all_languages=
-all_boot_languages=
all_compilers=
-all_stagestuff=
-all_outputs='Makefile gccbug mklibgcc mkheaders libada-mk'
+all_outputs='Makefile gccbug'
# List of language makefile fragments.
all_lang_makefrags=
# List of language subdirectory makefiles. Deprecated.
all_lang_makefiles=
-# Files for gengtype
+# Additional files for gengtype
all_gtfiles="$target_gtfiles"
-# Files for gengtype with language
-all_gtfiles_files_langs=
-all_gtfiles_files_files=
+
+# These are the languages that are set in --enable-languages,
+# and are available in the GCC tree.
+all_selected_languages=
# Add the language fragments.
# Languages are added via two mechanisms. Some information must be
language_hooks="Make-hooks"
-for s in $subdirs
+for lang in ${srcdir}/*/config-lang.in
do
- language=
- boot_language=
- compilers=
- stagestuff=
- outputs=
- gtfiles=
- . ${srcdir}/$s/config-lang.in
- if test "x$language" = x
- then
- echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
- exit 1
- fi
- all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$s/Make-lang.in"
- if test -f ${srcdir}/$s/Makefile.in
- then all_lang_makefiles="$s/Makefile"
- fi
- all_languages="$all_languages $language"
- if test "x$boot_language" = xyes
- then
- all_boot_languages="$all_boot_languages $language"
- fi
- all_compilers="$all_compilers $compilers"
- all_stagestuff="$all_stagestuff $stagestuff"
- all_outputs="$all_outputs $outputs"
- all_gtfiles="$all_gtfiles $gtfiles"
- for f in $gtfiles
- do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
- all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
- done
+ test "$lang" = "${srcdir}/*/config-lang.in" && continue
+
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ subdir="`echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
+ subdirs="$subdirs $subdir"
+
+ # $gcc_subdir is where the gcc integration files are to be found
+ # for a language, both for internal compiler purposes (compiler
+ # sources implementing front-end to GCC tree converters), and for
+ # build infrastructure purposes (Make-lang.in, etc.)
+ #
+ # This will be <subdir> (relative to $srcdir) if a line like
+ # gcc_subdir="<subdir>" or gcc_subdir=<subdir>
+ # is found in <langdir>/config-lang.in, and will remain <langdir>
+ # otherwise.
+ #
+ # Except for the language alias (fetched above), the regular
+ # "config-lang.in" contents are always retrieved from $gcc_subdir,
+ # so a <langdir>/config-lang.in setting gcc_subdir typically sets
+ # only this and the language alias.
+
+ gcc_subdir=`sed -n -e 's,^gcc_subdir=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^gcc_subdir=\([^ ]*\).*$,\1,p' $lang`
+ if [ "$gcc_subdir" = "" ]; then
+ gcc_subdir="$subdir"
+ fi
+
+ case ",$enable_languages," in
+ *,$lang_alias,*)
+ all_selected_languages="$all_selected_languages $lang_alias"
+ if test -f $srcdir/$gcc_subdir/lang-specs.h; then
+ lang_specs_files="$lang_specs_files $srcdir/$gcc_subdir/lang-specs.h"
+ fi
+ ;;
+ esac
+
+ language=
+ boot_language=
+ compilers=
+ outputs=
+ gtfiles=
+ subdir_requires=
+ . ${srcdir}/$gcc_subdir/config-lang.in
+ if test "x$language" = x
+ then
+ echo "${srcdir}/$gcc_subdir/config-lang.in doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ ok=:
+ case ",$enable_languages," in
+ *,$lang_alias,*) ;;
+ *)
+ for i in $subdir_requires; do
+ test -f "${srcdir}/$i/config-lang.in" && continue
+ ok=false
+ break
+ done
+ ;;
+ esac
+ $ok || continue
+
+ all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$gcc_subdir/Make-lang.in"
+ if test -f $srcdir/$gcc_subdir/lang.opt; then
+ lang_opt_files="$lang_opt_files $srcdir/$gcc_subdir/lang.opt"
+ fi
+ if test -f $srcdir/$gcc_subdir/$subdir-tree.def; then
+ lang_tree_files="$lang_tree_files $srcdir/$gcc_subdir/$subdir-tree.def"
+ fi
+ if test -f ${srcdir}/$gcc_subdir/Makefile.in
+ then all_lang_makefiles="$gcc_subdir/Makefile"
+ fi
+ all_languages="$all_languages $language"
+ all_compilers="$all_compilers $compilers"
+ all_outputs="$all_outputs $outputs"
+ all_gtfiles="$all_gtfiles [$subdir] $gtfiles"
done
# Pick up gtfiles for c
gtfiles=
-s="c"
. ${srcdir}/c-config-lang.in
-all_gtfiles="$all_gtfiles $gtfiles"
-for f in $gtfiles
-do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
- all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
-done
+all_gtfiles="$all_gtfiles [c] $gtfiles"
check_languages=
-for language in $all_languages
+for language in $all_selected_languages
do
- check_languages="$check_languages check-$language"
+ check_languages="$check_languages check-$language"
done
# We link each language in with a set of hooks, reached indirectly via
-# lang.${target}.
+# lang.${target}. Only do so for selected languages.
rm -f Make-hooks
touch Make-hooks
-target_list="all.build all.cross start.encap rest.encap tags \
- install-normal install-common install-man \
- uninstall info man srcextra srcman srcinfo \
- mostlyclean clean distclean maintainer-clean \
- stage1 stage2 stage3 stage4 stageprofile stagefeedback"
+target_list="all.cross start.encap rest.encap tags \
+ install-common install-man install-info install-pdf dvi pdf \
+ html uninstall info man srcextra srcman srcinfo \
+ mostlyclean clean distclean maintainer-clean"
+
for t in $target_list
do
x=
- for lang in $all_languages
+ for lang in $all_selected_languages
do
- x="$x $lang.$t"
+ x="$x $lang.$t"
done
echo "lang.$t: $x" >> Make-hooks
done
fi
echo "source ${srcdir}/gdbinit.in" >> .gdbinit
-# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
-# absolute path for gcc_tooldir based on inserting the number of up-directory
-# movements required to get from $(exec_prefix) to $(prefix) into the basic
-# $(libsubdir)/@(unlibsubdir) based path.
-# Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel
-# make and thus we'd get different behavior depending on where we built the
-# sources.
-if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then
- gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_noncanonical)'
-else
-# An explanation of the sed strings:
-# -e 's|^\$(prefix)||' matches and eliminates 'prefix' from 'exec_prefix'
-# -e 's|/$||' match a trailing forward slash and eliminates it
-# -e 's|^[^/]|/|' forces the string to start with a forward slash (*)
-# -e 's|/[^/]*|../|g' replaces each occurrence of /<directory> with ../
-#
-# (*) Note this pattern overwrites the first character of the string
-# with a forward slash if one is not already present. This is not a
-# problem because the exact names of the sub-directories concerned is
-# unimportant, just the number of them matters.
-#
-# The practical upshot of these patterns is like this:
-#
-# prefix exec_prefix result
-# ------ ----------- ------
-# /foo /foo/bar ../
-# /foo/ /foo/bar ../
-# /foo /foo/bar/ ../
-# /foo/ /foo/bar/ ../
-# /foo /foo/bar/ugg ../../
-#
- dollar='$$'
- gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_noncanonical)"
-fi
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
fi;
-objdir=`${PWDCMD-pwd}`
-
-
-# Substitute configuration variables
-
-
-
-
+# Check whether --with-datarootdir or --without-datarootdir was given.
+if test "${with_datarootdir+set}" = set; then
+ withval="$with_datarootdir"
+ datarootdir="\${prefix}/$with_datarootdir"
+else
+ datarootdir='$(prefix)/share'
+fi;
+# Check whether --with-docdir or --without-docdir was given.
+if test "${with_docdir+set}" = set; then
+ withval="$with_docdir"
+ docdir="\${prefix}/$with_docdir"
+else
+ docdir='$(datarootdir)'
+fi;
+# Check whether --with-htmldir or --without-htmldir was given.
+if test "${with_htmldir+set}" = set; then
+ withval="$with_htmldir"
+ htmldir="\${prefix}/$with_htmldir"
+else
+ htmldir='$(docdir)'
+fi;
+# Substitute configuration variables
-if test x"$SET_GCC_LIB_PATH_CMD" != x; then
- # SET_GCC_LIB_PATH_CMD is "XXX=path; export XXX;". It is expanded to
- #
- # eval "set_gcc_lib_path=XXX=path; export XXX;"
- #
- eval "set_gcc_lib_path=$SET_GCC_LIB_PATH_CMD"
- # It will set set_gcc_lib_path to "export XXX=path" for GNU make.
- set_gcc_lib_path="export $set_gcc_lib_path"
-else
- set_gcc_lib_path=
-fi
+
+
+
+
+
+if test "x${CLOOGLIBS}" != "x" ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_cloog 1
+_ACEOF
+
+fi
+
# Configure the subdirectories
# AC_CONFIG_SUBDIRS($subdirs)
do
case "$ac_config_target" in
# Handling of arguments.
+ "as" ) CONFIG_FILES="$CONFIG_FILES as:exec-tool.in" ;;
+ "collect-ld" ) CONFIG_FILES="$CONFIG_FILES collect-ld:exec-tool.in" ;;
+ "nm" ) CONFIG_FILES="$CONFIG_FILES nm:exec-tool.in" ;;
"$all_outputs" ) CONFIG_FILES="$CONFIG_FILES $all_outputs" ;;
"default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
"auto-host.h" ) CONFIG_HEADERS="$CONFIG_HEADERS auto-host.h:config.in" ;;
s,@target_vendor@,$target_vendor,;t t
s,@target_os@,$target_os,;t t
s,@target_noncanonical@,$target_noncanonical,;t t
+s,@build_libsubdir@,$build_libsubdir,;t t
s,@build_subdir@,$build_subdir,;t t
s,@host_subdir@,$host_subdir,;t t
s,@target_subdir@,$target_subdir,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
+s,@GNATBIND@,$GNATBIND,;t t
+s,@ac_ct_GNATBIND@,$ac_ct_GNATBIND,;t t
+s,@GNATMAKE@,$GNATMAKE,;t t
+s,@ac_ct_GNATMAKE@,$ac_ct_GNATMAKE,;t t
s,@NO_MINUS_C_MINUS_O@,$NO_MINUS_C_MINUS_O,;t t
s,@OUTPUT_OPTION@,$OUTPUT_OPTION,;t t
s,@CPP@,$CPP,;t t
s,@EGREP@,$EGREP,;t t
-s,@strict1_warn@,$strict1_warn,;t t
+s,@loose_warn@,$loose_warn,;t t
+s,@strict_warn@,$strict_warn,;t t
s,@warn_cflags@,$warn_cflags,;t t
-s,@WERROR@,$WERROR,;t t
s,@nocommon_flag@,$nocommon_flag,;t t
s,@TREEBROWSER@,$TREEBROWSER,;t t
s,@valgrind_path@,$valgrind_path,;t t
s,@valgrind_command@,$valgrind_command,;t t
s,@coverage_flags@,$coverage_flags,;t t
s,@enable_multilib@,$enable_multilib,;t t
+s,@enable_decimal_float@,$enable_decimal_float,;t t
+s,@enable_fixed_point@,$enable_fixed_point,;t t
s,@enable_shared@,$enable_shared,;t t
s,@TARGET_SYSTEM_ROOT@,$TARGET_SYSTEM_ROOT,;t t
s,@TARGET_SYSTEM_ROOT_DEFINE@,$TARGET_SYSTEM_ROOT_DEFINE,;t t
s,@CROSS_SYSTEM_HEADER_DIR@,$CROSS_SYSTEM_HEADER_DIR,;t t
s,@onestep@,$onestep,;t t
+s,@PKGVERSION@,$PKGVERSION,;t t
+s,@REPORT_BUGS_TO@,$REPORT_BUGS_TO,;t t
+s,@REPORT_BUGS_TEXI@,$REPORT_BUGS_TEXI,;t t
+s,@datarootdir@,$datarootdir,;t t
+s,@docdir@,$docdir,;t t
+s,@htmldir@,$htmldir,;t t
s,@SET_MAKE@,$SET_MAKE,;t t
s,@AWK@,$AWK,;t t
s,@LN_S@,$LN_S,;t t
s,@BISON@,$BISON,;t t
s,@NM@,$NM,;t t
s,@AR@,$AR,;t t
-s,@stage1_cflags@,$stage1_cflags,;t t
s,@COLLECT2_LIBS@,$COLLECT2_LIBS,;t t
s,@GNAT_LIBEXC@,$GNAT_LIBEXC,;t t
s,@LDEXP_LIB@,$LDEXP_LIB,;t t
s,@objext@,$objext,;t t
s,@gthread_flags@,$gthread_flags,;t t
s,@extra_modes_file@,$extra_modes_file,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
+s,@extra_opt_files@,$extra_opt_files,;t t
s,@USE_NLS@,$USE_NLS,;t t
s,@LIBINTL@,$LIBINTL,;t t
s,@LIBINTL_DEP@,$LIBINTL_DEP,;t t
s,@GMSGFMT@,$GMSGFMT,;t t
s,@POSUB@,$POSUB,;t t
s,@CATALOGS@,$CATALOGS,;t t
+s,@DATADIRNAME@,$DATADIRNAME,;t t
+s,@INSTOBJEXT@,$INSTOBJEXT,;t t
+s,@GENCAT@,$GENCAT,;t t
+s,@CATOBJEXT@,$CATOBJEXT,;t t
s,@CROSS@,$CROSS,;t t
s,@ALL@,$ALL,;t t
s,@SYSTEM_HEADER_DIR@,$SYSTEM_HEADER_DIR,;t t
s,@inhibit_libc@,$inhibit_libc,;t t
s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
s,@BUILD_CFLAGS@,$BUILD_CFLAGS,;t t
+s,@BUILD_LDFLAGS@,$BUILD_LDFLAGS,;t t
s,@STMP_FIXINC@,$STMP_FIXINC,;t t
s,@STMP_FIXPROTO@,$STMP_FIXPROTO,;t t
s,@collect2@,$collect2,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
+s,@SED@,$SED,;t t
+s,@FGREP@,$FGREP,;t t
+s,@GREP@,$GREP,;t t
+s,@LD@,$LD,;t t
+s,@DUMPBIN@,$DUMPBIN,;t t
+s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
+s,@ac_ct_AR@,$ac_ct_AR,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@lt_ECHO@,$lt_ECHO,;t t
+s,@objdir@,$objdir,;t t
+s,@enable_fast_install@,$enable_fast_install,;t t
+s,@gcc_cv_as@,$gcc_cv_as,;t t
+s,@ORIGINAL_AS_FOR_TARGET@,$ORIGINAL_AS_FOR_TARGET,;t t
+s,@gcc_cv_ld@,$gcc_cv_ld,;t t
+s,@ORIGINAL_LD_FOR_TARGET@,$ORIGINAL_LD_FOR_TARGET,;t t
+s,@gcc_cv_nm@,$gcc_cv_nm,;t t
+s,@ORIGINAL_NM_FOR_TARGET@,$ORIGINAL_NM_FOR_TARGET,;t t
+s,@gcc_cv_objdump@,$gcc_cv_objdump,;t t
s,@libgcc_visibility@,$libgcc_visibility,;t t
s,@GGC@,$GGC,;t t
s,@zlibdir@,$zlibdir,;t t
s,@gcc_tooldir@,$gcc_tooldir,;t t
s,@dollar@,$dollar,;t t
s,@slibdir@,$slibdir,;t t
-s,@objdir@,$objdir,;t t
s,@subdirs@,$subdirs,;t t
s,@srcdir@,$srcdir,;t t
-s,@all_boot_languages@,$all_boot_languages,;t t
s,@all_compilers@,$all_compilers,;t t
s,@all_gtfiles@,$all_gtfiles,;t t
-s,@all_gtfiles_files_langs@,$all_gtfiles_files_langs,;t t
-s,@all_gtfiles_files_files@,$all_gtfiles_files_files,;t t
s,@all_lang_makefrags@,$all_lang_makefrags,;t t
s,@all_lang_makefiles@,$all_lang_makefiles,;t t
s,@all_languages@,$all_languages,;t t
-s,@all_stagestuff@,$all_stagestuff,;t t
+s,@all_selected_languages@,$all_selected_languages,;t t
s,@build_exeext@,$build_exeext,;t t
s,@build_install_headers_dir@,$build_install_headers_dir,;t t
s,@build_xm_file_list@,$build_xm_file_list,;t t
s,@build_xm_include_list@,$build_xm_include_list,;t t
s,@build_xm_defines@,$build_xm_defines,;t t
+s,@build_file_translate@,$build_file_translate,;t t
s,@check_languages@,$check_languages,;t t
-s,@cc_set_by_configure@,$cc_set_by_configure,;t t
-s,@quoted_cc_set_by_configure@,$quoted_cc_set_by_configure,;t t
s,@cpp_install_dir@,$cpp_install_dir,;t t
s,@xmake_file@,$xmake_file,;t t
s,@tmake_file@,$tmake_file,;t t
s,@float_h_file@,$float_h_file,;t t
s,@gcc_config_arguments@,$gcc_config_arguments,;t t
s,@gcc_gxx_include_dir@,$gcc_gxx_include_dir,;t t
-s,@libstdcxx_incdir@,$libstdcxx_incdir,;t t
-s,@gcc_version@,$gcc_version,;t t
-s,@gcc_version_full@,$gcc_version_full,;t t
-s,@gcc_version_trigger@,$gcc_version_trigger,;t t
s,@host_exeext@,$host_exeext,;t t
s,@host_xm_file_list@,$host_xm_file_list,;t t
s,@host_xm_include_list@,$host_xm_include_list,;t t
s,@objc_boehm_gc@,$objc_boehm_gc,;t t
s,@out_file@,$out_file,;t t
s,@out_object_file@,$out_object_file,;t t
-s,@stage_prefix_set_by_configure@,$stage_prefix_set_by_configure,;t t
-s,@quoted_stage_prefix_set_by_configure@,$quoted_stage_prefix_set_by_configure,;t t
s,@thread_file@,$thread_file,;t t
s,@tm_file_list@,$tm_file_list,;t t
s,@tm_include_list@,$tm_include_list,;t t
s,@xm_defines@,$xm_defines,;t t
s,@c_target_objs@,$c_target_objs,;t t
s,@cxx_target_objs@,$cxx_target_objs,;t t
+s,@fortran_target_objs@,$fortran_target_objs,;t t
s,@target_cpu_default@,$target_cpu_default,;t t
-s,@set_gcc_lib_path@,$set_gcc_lib_path,;t t
s,@GMPLIBS@,$GMPLIBS,;t t
s,@GMPINC@,$GMPINC,;t t
+s,@PPLLIBS@,$PPLLIBS,;t t
+s,@PPLINC@,$PPLINC,;t t
+s,@CLOOGLIBS@,$CLOOGLIBS,;t t
+s,@CLOOGINC@,$CLOOGINC,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
/@language_hooks@/r $language_hooks
rm -f $tmp/out
fi
+ # Run the commands associated with the file.
+ case $ac_file in
+ as ) chmod +x as ;;
+ collect-ld ) chmod +x collect-ld ;;
+ nm ) chmod +x nm ;;
+ esac
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
do
test -d $d || mkdir $d
done
-# If the host supports symlinks, point stage[1234] at ../stage[1234] so
-# bootstrapping and the installation procedure can still use
-# CC="stage1/xgcc -Bstage1/". If the host doesn't support symlinks,
-# FLAGS_TO_PASS has been modified to solve the problem there.
-# This is virtually a duplicate of what happens in configure.lang; we do
-# an extra check to make sure this only happens if ln -s can be used.
-case "$LN_S" in
- *-s*)
- for d in ${subdirs} ; do
- STARTDIR=`${PWDCMD-pwd}`
- cd $d
- for t in stage1 stage2 stage3 stage4 stageprofile stagefeedback include
- do
- rm -f $t
- $LN_S ../$t $t 2>/dev/null
- done
- cd $STARTDIR
- done
- ;;
-esac
;;
esac
done
OSDN Git Service
