esac],
[enable_languages=c])
-subdirs=
-for lang in ${srcdir}/*/config-lang.in
-do
- case $lang in
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
-changequote(,)dnl
- ${srcdir}/[*]/config-lang.in) ;;
- *)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- if test "x$lang_alias" = x
- then
- echo "$lang doesn't set \$language." 1>&2
- exit 1
- fi
- case ",$enable_languages," in
- *,$lang_alias,*)
- subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`" ;;
- esac
- ;;
-changequote([,])dnl
- esac
-done
-
# -------------------------
# Checks for other programs
use_cxa_atexit=yes
fi
if test x$use_cxa_atexit = xyes; then
- AC_DEFINE(DEFAULT_USE_CXA_ATEXIT, 1,
+ AC_DEFINE(DEFAULT_USE_CXA_ATEXIT, 2,
[Define if you want to use __cxa_atexit, rather than atexit, to
register C++ destructors for local statics and global objects.
This is essential for fully standards-compliant handling of
gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
AS_VAR_SET_IF(gcc_cv_nm,, [
if test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
gcc_cv_nm=../binutils/nm-new$build_exeext
elif test -x nm$build_exeext; then
gcc_cv_nm=./nm$build_exeext
# Figure out what objdump we will be using.
AS_VAR_SET_IF(gcc_cv_objdump,, [
if test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
# Single tree build which includes binutils.
gcc_cv_objdump=../binutils/objdump$build_exeext
elif test -x objdump$build_exeext; then
[Define if your target C library provides stack protector support])
fi
+# Check if TFmode long double should be used by default or not.
+# Some glibc targets used DFmode long double, but with glibc 2.4
+# and later they can use TFmode.
+case "$target" in
+ powerpc*-*-*gnu* | \
+ sparc*-*-linux* | \
+ s390*-*-linux* | \
+ alpha*-*-linux*)
+ AC_ARG_WITH(long-double-128,
+[ --with-long-double-128 Use 128-bit long double by default.],
+ gcc_cv_target_ldbl128="$with_long_double_128",
+ [gcc_cv_target_ldbl128=no
+ if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x; then
+ if test "x$with_sysroot" = x; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-include"
+ elif test "x$with_sysroot" = xyes; then
+ glibc_header_dir="${exec_prefix}/${target_noncanonical}/sys-root/usr/include"
+ else
+ glibc_header_dir="${with_sysroot}/usr/include"
+ fi
+ else
+ glibc_header_dir=/usr/include
+ fi
+ grep '^[ ]*#[ ]*define[ ][ ]*__LONG_DOUBLE_MATH_OPTIONAL' \
+ $glibc_header_dir/bits/wordsize.h > /dev/null 2>&1 \
+ && gcc_cv_target_ldbl128=yes])
+ ;;
+esac
+if test x$gcc_cv_target_ldbl128 = xyes; then
+ AC_DEFINE(TARGET_DEFAULT_LONG_DOUBLE_128, 1,
+ [Define if TFmode long double should be the default])
+fi
+
# Find out what GC implementation we want, or may, use.
AC_ARG_WITH(gc,
[ --with-gc={page,zone} choose the garbage collection mechanism to use
# Make empty files to contain the specs and options for each language.
# Then add #include lines to for a compiler that has specs and/or options.
+subdirs=
lang_opt_files=
lang_specs_files=
lang_tree_files=
-for subdir in . $subdirs
-do
- if test -f $srcdir/$subdir/lang.opt; then
- lang_opt_files="$lang_opt_files $srcdir/$subdir/lang.opt"
- fi
- if test -f $srcdir/$subdir/lang-specs.h; then
- lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h"
- fi
- if test -f $srcdir/$subdir/$subdir-tree.def; then
- lang_tree_files="$lang_tree_files $srcdir/$subdir/$subdir-tree.def"
- fi
-done
-
# These (without "all_") are set in each config-lang.in.
# `language' must be a single word so is spelled singularly.
all_languages=
all_gtfiles_files_langs=
all_gtfiles_files_files=
+# These are the languages that are set in --enable-languages,
+# and are available in the GCC tree.
+all_selected_languages=
+
# Add the language fragments.
# Languages are added via two mechanisms. Some information must be
# recorded in makefile variables, these are defined in config-lang.in.
language_hooks="Make-hooks"
-for s in $subdirs
+for lang in ${srcdir}/*/config-lang.in
do
- language=
- boot_language=
- compilers=
- stagestuff=
- outputs=
- gtfiles=
- . ${srcdir}/$s/config-lang.in
- if test "x$language" = x
- then
- echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
- exit 1
- fi
- all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$s/Make-lang.in"
- if test -f ${srcdir}/$s/Makefile.in
- then all_lang_makefiles="$s/Makefile"
- fi
- all_languages="$all_languages $language"
- if test "x$boot_language" = xyes
- then
- all_boot_languages="$all_boot_languages $language"
- fi
- all_compilers="$all_compilers $compilers"
- all_stagestuff="$all_stagestuff $stagestuff"
- all_outputs="$all_outputs $outputs"
- all_gtfiles="$all_gtfiles $gtfiles"
- for f in $gtfiles
- do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
- all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
- done
+ case $lang in
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+changequote(,)dnl
+ ${srcdir}/[*]/config-lang.in)
+ continue ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ subdir="`echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
+ subdirs="$subdirs $subdir"
+ case ",$enable_languages," in
+ *,$lang_alias,*)
+ all_selected_languages="$all_selected_languages $lang_alias"
+ if test -f $srcdir/$subdir/lang-specs.h; then
+ lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h"
+ fi
+ ;;
+ esac
+changequote([,])dnl
+
+ if test -f $srcdir/$subdir/lang.opt; then
+ lang_opt_files="$lang_opt_files $srcdir/$subdir/lang.opt"
+ fi
+ if test -f $srcdir/$subdir/$subdir-tree.def; then
+ lang_tree_files="$lang_tree_files $srcdir/$subdir/$subdir-tree.def"
+ fi
+
+ language=
+ boot_language=
+ compilers=
+ stagestuff=
+ outputs=
+ gtfiles=
+ . ${srcdir}/$subdir/config-lang.in
+ if test "x$language" = x
+ then
+ echo "${srcdir}/$subdir/config-lang.in doesn't set \$language." 1>&2
+ exit 1
+ fi
+ all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$subdir/Make-lang.in"
+ if test -f ${srcdir}/$subdir/Makefile.in
+ then all_lang_makefiles="$subdir/Makefile"
+ fi
+ all_languages="$all_languages $language"
+ if test "x$boot_language" = xyes
+ then
+ all_boot_languages="$all_boot_languages $language"
+ fi
+ all_compilers="$all_compilers $compilers"
+ all_stagestuff="$all_stagestuff $stagestuff"
+ all_outputs="$all_outputs $outputs"
+ all_gtfiles="$all_gtfiles $gtfiles"
+ for f in $gtfiles
+ do
+ all_gtfiles_files_langs="$all_gtfiles_files_langs ${subdir} "
+ all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
+ done
+ ;;
+ esac
done
# Pick up gtfiles for c
gtfiles=
-s="c"
+subdir="c"
. ${srcdir}/c-config-lang.in
all_gtfiles="$all_gtfiles $gtfiles"
for f in $gtfiles
do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
+ all_gtfiles_files_langs="$all_gtfiles_files_langs ${subdir} "
all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
done
check_languages=
-for language in $all_languages
+for language in $all_selected_languages
do
- check_languages="$check_languages check-$language"
+ check_languages="$check_languages check-$language"
done
# We link each language in with a set of hooks, reached indirectly via
-# lang.${target}.
+# lang.${target}. Only do so for selected languages.
rm -f Make-hooks
touch Make-hooks
target_list="all.cross start.encap rest.encap tags \
- install-common install-man \
+ install-common install-man install-info dvi html \
uninstall info man srcextra srcman srcinfo \
mostlyclean clean distclean maintainer-clean \
stage1 stage2 stage3 stage4 stageprofile stagefeedback"
+
for t in $target_list
do
x=
- for lang in $all_languages
+ for lang in $all_selected_languages
do
- x="$x $lang.$t"
+ x="$x $lang.$t"
done
echo "lang.$t: $x" >> Make-hooks
done
AC_SUBST(all_lang_makefrags)
AC_SUBST(all_lang_makefiles)
AC_SUBST(all_languages)
+AC_SUBST(all_selected_languages)
AC_SUBST(all_stagestuff)
AC_SUBST(build_exeext)
AC_SUBST(build_install_headers_dir)
OSDN Git Service
