-/* svr3.h -- operating system specific defines to be used when
- targeting GCC for some generic System V Release 3 system.
- Copyright (C) 1991 Free Software Foundation, Inc.
+/* Operating system specific defines to be used when targeting GCC for
+ generic System V Release 3 system.
+ Copyright (C) 1991, 1996, 2000, 2002, 2004 Free Software Foundation, Inc.
+ Contributed by Ron Guilmette (rfg@monkeys.com).
- Written by Ron Guilmette (rfg@ncd.com).
+This file is part of GCC.
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
+GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
-GNU CC is distributed in the hope that it will be useful,
+GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- To use this file, make up a file with a name like:
-
- ?????svr3.h
-
- where ????? is replaced by the name of the basic hardware that you
- are targeting for. Then, in the file ?????svr3.h, put something
- like:
-
- #include "?????.h"
- #include "svr3.h"
+along with GCC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
- followed by any really system-specific defines (or overrides of
- defines) which you find that you need. For example, CPP_PREDEFINES
- is defined here with only the defined -Dunix and -DSVR3. You should
- probably override that in your target-specific ?????svr3.h file
- with a set of defines that includes these, but also contains an
- appropriate define for the type of hardware that you are targeting.
-*/
+/* Define a symbol indicating that we are using svr3.h. */
+#define USING_SVR3_H
/* Define a symbol so that libgcc* can know what sort of operating
environment and assembler syntax we are targeting for. */
#define SVR3_target
-/* Cpp, assembler, linker, library, and startfile spec's. */
+/* Assembler, linker, library, and startfile spec's. */
-/* You should redefine CPP_PREDEFINES in any file which includes this one.
- The definition should be appropriate for the type of target system
- involved, and it should include any -A (assertion) options which are
- appropriate for the given target system. */
-
-#undef CPP_PREDEFINES
-
-/* Output at beginning of assembler file. */
/* The .file command should always begin the output. */
-
-#undef ASM_FILE_START
-#define ASM_FILE_START(FILE) \
- do { output_file_directive ((FILE), main_input_filename); \
- if (optimize) ASM_FILE_START_1 (FILE); \
- } while (0)
-
-/* By default, do nothing: a few machines support .optim, but not most. */
-#undef ASM_FILE_START_1
-#define ASM_FILE_START_1(FILE)
+#define TARGET_ASM_FILE_START_FILE_DIRECTIVE true
/* This says how to output an assembler line
to define a global common symbol. */
#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
( fputs (".comm ", (FILE)), \
assemble_name ((FILE), (NAME)), \
- fprintf ((FILE), ",%u\n", (SIZE)))
+ fprintf ((FILE), ",%lu\n", (unsigned long)(SIZE)))
/* This says how to output an assembler line
to define a local common symbol. */
data_section (); \
ASM_OUTPUT_ALIGN ((FILE), align == -1 ? 2 : align); \
ASM_OUTPUT_LABEL ((FILE), (NAME)); \
- fprintf ((FILE), "\t.set .,.+%u\n", (ROUNDED)); \
+ fprintf ((FILE), "\t.set .,.+%u\n", (int)(ROUNDED)); \
} while (0)
-#if 0 /* For now, let's leave these machine-specific. */
-/* Use crt1.o as a startup file and crtn.o as a closing file. */
-
-#define STARTFILE_SPEC \
- "%{pg:gcrt1.o%s}%{!pg:%{p:mcrt1.o%s}%{!p:crt1.o%s}}"
-
-#define LIB_SPEC "%{p:-L/usr/lib/libp}%{pg:-L/usr/lib/libp} -lc crtn.o%s"
-
-/* Special flags for the linker. I don't know what they do. */
-
-#define LINK_SPEC "%{T*} %{z:-lm}"
-#endif
-
-/* Allow #sccs in preprocessor. */
-
-#define SCCS_DIRECTIVE
-
/* Output #ident as a .ident. */
+#undef ASM_OUTPUT_IDENT
#define ASM_OUTPUT_IDENT(FILE, NAME) \
fprintf (FILE, "\t.ident \"%s\"\n", NAME);
#define NO_DOLLAR_IN_LABEL
-/* Implicit library calls should use memcpy, not bcopy, etc. */
-
-#define TARGET_MEM_FUNCTIONS
-
/* System V Release 3 uses COFF debugging info. */
-#define SDB_DEBUGGING_INFO
+#define SDB_DEBUGGING_INFO 1
/* We don't want to output DBX debugging information. */
#undef WCHAR_TYPE_SIZE
#define WCHAR_TYPE_SIZE BITS_PER_WORD
-/* Assembler pseudos to introduce constants of various size. These
- definitions hsould work for most svr3 systems. */
-
-#undef ASM_BYTE_OP
-#define ASM_BYTE_OP "\t.byte"
-
-/* This is how to output a reference to a user-level label named NAME.
- `assemble_name' uses this.
+/* The prefix to add to user-visible assembler symbols.
For System V Release 3 the convention is to prepend a leading
underscore onto user-level symbol names. */
-#undef ASM_OUTPUT_LABELREF
-#define ASM_OUTPUT_LABELREF(FILE,NAME) fprintf (FILE, "_%s", NAME)
+#undef USER_LABEL_PREFIX
+#define USER_LABEL_PREFIX "_"
-/* Support const sections and the ctors and dtors sections for g++.
- Note that there appears to be two different ways to support const
- sections at the moment. You can either #define the symbol
- READONLY_DATA_SECTION (giving it some code which switches to the
- readonly data section) or else you can #define the symbols
- EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and
- SELECT_RTX_SECTION. We do both here just to be on the safe side.
- However, use of the const section is turned off by default
- unless the specific tm.h file turns it on by defining
- USE_CONST_SECTION as 1. */
+/* This is how to store into the string LABEL
+ the symbol_ref name of an internal numbered label where
+ PREFIX is the class of label and NUM is the number within the class.
+ This is suitable for output with `assemble_name'.
+
+ For most svr3 systems, the convention is that any symbol which begins
+ with a period is not put into the linker symbol table by the assembler. */
+
+#undef ASM_GENERATE_INTERNAL_LABEL
+#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
+ sprintf (LABEL, "*%s%s%ld", LOCAL_LABEL_PREFIX, PREFIX, (long)(NUM))
+
+/* We want local labels to start with period if made with asm_fprintf. */
+#undef LOCAL_LABEL_PREFIX
+#define LOCAL_LABEL_PREFIX "."
+
+/* Support const sections and the ctors and dtors sections for g++. */
/* Define a few machine-specific details of the implementation of
constructors.
and CTOR_LIST_END to contribute to the .init section an instruction to
push a word containing 0 (or some equivalent of that).
- Define ASM_OUTPUT_CONSTRUCTOR to push the address of the constructor. */
-
-#define USE_CONST_SECTION 0
+ Define TARGET_ASM_CONSTRUCTOR to push the address of the constructor. */
-#define INIT_SECTION_ASM_OP ".section\t.init"
-#define FINI_SECTION_ASM_OP ".section .fini,\"x\""
-#define CONST_SECTION_ASM_OP ".section\t.rodata, \"x\""
-#define CTORS_SECTION_ASM_OP INIT_SECTION_ASM_OP
+#define INIT_SECTION_ASM_OP "\t.section\t.init"
+#define FINI_SECTION_ASM_OP "\t.section .fini,\"x\""
#define DTORS_SECTION_ASM_OP FINI_SECTION_ASM_OP
/* CTOR_LIST_BEGIN and CTOR_LIST_END are machine-dependent
because they push on the stack. */
-#define DO_GLOBAL_CTORS_BODY \
-do { \
- func_ptr *__CTOR_LIST__ = __builtin_alloca (0), *p; \
- for (p = __CTOR_LIST__; *p; ) \
- (*p++) (); \
+#ifndef STACK_GROWS_DOWNWARD
+
+/* Constructor list on stack is in reverse order. Go to the end of the
+ list and go backwards to call constructors in the right order. */
+#define DO_GLOBAL_CTORS_BODY \
+do { \
+ func_ptr *p, *beg = alloca (0); \
+ for (p = beg; *p; p++) \
+ ; \
+ while (p != beg) \
+ (*--p) (); \
} while (0)
-/* Add extra sections .init and .fini, in addition to .bss from att386.h. */
+#else
+
+/* Constructor list on stack is in correct order. Just call them. */
+#define DO_GLOBAL_CTORS_BODY \
+do { \
+ func_ptr *p, *beg = alloca (0); \
+ for (p = beg; *p; ) \
+ (*p++) (); \
+} while (0)
+
+#endif /* STACK_GROWS_DOWNWARD */
#undef EXTRA_SECTIONS
-#define EXTRA_SECTIONS in_const, in_bss, in_init, in_fini
+#define EXTRA_SECTIONS in_init, in_fini
#undef EXTRA_SECTION_FUNCTIONS
#define EXTRA_SECTION_FUNCTIONS \
- CONST_SECTION_FUNCTION \
- BSS_SECTION_FUNCTION \
INIT_SECTION_FUNCTION \
FINI_SECTION_FUNCTION
#define INIT_SECTION_FUNCTION \
void \
-init_section () \
+init_section () \
{ \
if (in_section != in_init) \
{ \
- fprintf (asm_out_file, "\t%s\n", INIT_SECTION_ASM_OP); \
+ fprintf (asm_out_file, "%s\n", INIT_SECTION_ASM_OP); \
in_section = in_init; \
} \
}
{ \
if (in_section != in_fini) \
{ \
- fprintf (asm_out_file, "\t%s\n", FINI_SECTION_ASM_OP); \
+ fprintf (asm_out_file, "%s\n", FINI_SECTION_ASM_OP); \
in_section = in_fini; \
} \
}
-
-#define READONLY_DATA_SECTION() const_section ()
-
-#define CONST_SECTION_FUNCTION \
-void \
-const_section () \
-{ \
- extern void text_section(); \
- if (!USE_CONST_SECTION) \
- text_section(); \
- else if (in_section != in_const) \
- { \
- fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP); \
- in_section = in_const; \
- } \
-}
-
-#if 0
-#define CTORS_SECTION_FUNCTION \
-void \
-ctors_section () \
-{ \
- if (in_section != in_ctors) \
- { \
- fprintf (asm_out_file, "%s\n", CTORS_SECTION_ASM_OP); \
- in_section = in_ctors; \
- } \
-}
-
-#define DTORS_SECTION_FUNCTION \
-void \
-dtors_section () \
-{ \
- if (in_section != in_dtors) \
- { \
- fprintf (asm_out_file, "%s\n", DTORS_SECTION_ASM_OP); \
- in_section = in_dtors; \
- } \
-}
-#endif
-
-/* This is machine-dependent
- because it needs to push something on the stack. */
-#undef ASM_OUTPUT_CONSTRUCTOR
-
-/* A C statement (sans semicolon) to output an element in the table of
- global destructors. */
-#define ASM_OUTPUT_DESTRUCTOR(FILE,NAME) \
- do { \
- fini_section (); \
- fprintf (FILE, "%s\t ", ASM_LONG); \
- assemble_name (FILE, NAME); \
- fprintf (FILE, "\n"); \
- } while (0)
-
-/* A C statement or statements to switch to the appropriate
- section for output of DECL. DECL is either a `VAR_DECL' node
- or a constant of some sort. RELOC indicates whether forming
- the initial value of DECL requires link-time relocations. */
-
-#define SELECT_SECTION(DECL,RELOC) \
-{ \
- if (TREE_CODE (DECL) == STRING_CST) \
- { \
- if (! flag_writable_strings) \
- const_section (); \
- else \
- data_section (); \
- } \
- else if (TREE_CODE (DECL) == VAR_DECL) \
- { \
- if ((0 && RELOC) /* should be (flag_pic && RELOC) */ \
- || !TREE_READONLY (DECL) || TREE_SIDE_EFFECTS (DECL)) \
- data_section (); \
- else \
- const_section (); \
- } \
- else \
- const_section (); \
-}
-
-/* A C statement or statements to switch to the appropriate
- section for output of RTX in mode MODE. RTX is some kind
- of constant in RTL. The argument MODE is redundant except
- in the case of a `const_int' rtx. Currently, these always
- go into the const section. */
-
-#define SELECT_RTX_SECTION(MODE,RTX) const_section()
OSDN Git Service
