/* Definitions of target machine for GNU compiler. MIPS version.
Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009
+ Free Software Foundation, Inc.
Contributed by A. Lichnewsky (lich@inria.inria.fr).
Changed by Michael Meissner (meissner@osf.org).
64-bit r4000 support by Ian Lance Taylor (ian@cygnus.com) and
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config/vxworks-dummy.h"
PROCESSOR_5KF,
PROCESSOR_20KC,
PROCESSOR_24KC,
- PROCESSOR_24KF,
- PROCESSOR_24KX,
+ PROCESSOR_24KF2_1,
+ PROCESSOR_24KF1_1,
PROCESSOR_74KC,
- PROCESSOR_74KF,
- PROCESSOR_74KX,
+ PROCESSOR_74KF2_1,
+ PROCESSOR_74KF1_1,
+ PROCESSOR_74KF3_2,
+ PROCESSOR_LOONGSON_2E,
+ PROCESSOR_LOONGSON_2F,
PROCESSOR_M4K,
+ PROCESSOR_OCTEON,
PROCESSOR_R3900,
PROCESSOR_R6000,
PROCESSOR_R4000,
PROCESSOR_R7000,
PROCESSOR_R8000,
PROCESSOR_R9000,
+ PROCESSOR_R10000,
PROCESSOR_SB1,
PROCESSOR_SB1A,
PROCESSOR_SR71000,
+ PROCESSOR_XLR,
PROCESSOR_MAX
};
#define ABI_EABI 3
#define ABI_O64 4
+/* Masks that affect tuning.
+
+ PTF_AVOID_BRANCHLIKELY
+ Set if it is usually not profitable to use branch-likely instructions
+ for this target, typically because the branches are always predicted
+ taken and so incur a large overhead when not taken. */
+#define PTF_AVOID_BRANCHLIKELY 0x1
+
/* Information about one recognized processor. Defined here for the
benefit of TARGET_CPU_CPP_BUILTINS. */
struct mips_cpu_info {
/* The ISA level that the processor implements. */
int isa;
+
+ /* A mask of PTF_* values. */
+ unsigned int tune_flags;
};
-#ifndef USED_FOR_TARGET
-extern char mips_print_operand_punct[256]; /* print_operand punctuation chars */
-extern const char *current_function_file; /* filename current function is in */
-extern int num_source_filenames; /* current .file # */
-extern int mips_section_threshold; /* # bytes of data/sdata cutoff */
-extern int sym_lineno; /* sgi next label # for each stmt */
-extern int set_noreorder; /* # of nested .set noreorder's */
-extern int set_nomacro; /* # of nested .set nomacro's */
-extern int set_noat; /* # of nested .set noat's */
-extern int set_volatile; /* # of nested .set volatile's */
-extern int mips_branch_likely; /* emit 'l' after br (branch likely) */
-extern int mips_dbx_regno[]; /* Map register # to debug register # */
-extern bool mips_split_p[];
-extern GTY(()) rtx cmp_operands[2];
-extern enum processor_type mips_arch; /* which cpu to codegen for */
-extern enum processor_type mips_tune; /* which cpu to schedule for */
-extern int mips_isa; /* architectural level */
-extern int mips_abi; /* which ABI to use */
-extern int mips16_hard_float; /* mips16 without -msoft-float */
-extern const struct mips_cpu_info mips_cpu_info_table[];
-extern const struct mips_cpu_info *mips_arch_info;
-extern const struct mips_cpu_info *mips_tune_info;
-extern const struct mips_rtx_cost_data *mips_cost;
-#endif
+/* Enumerates the setting of the -mcode-readable option. */
+enum mips_code_readable_setting {
+ CODE_READABLE_NO,
+ CODE_READABLE_PCREL,
+ CODE_READABLE_YES
+};
/* Macros to silence warnings about numbers being signed in traditional
C and unsigned in ISO C when compiled on 32-bit hosts. */
/* True if we are generating position-independent VxWorks RTP code. */
#define TARGET_RTP_PIC (TARGET_VXWORKS_RTP && flag_pic)
+/* True if the output file is marked as ".abicalls; .option pic0"
+ (-call_nonpic). */
+#define TARGET_ABICALLS_PIC0 \
+ (TARGET_ABSOLUTE_ABICALLS && TARGET_PLT)
+
+/* True if the output file is marked as ".abicalls; .option pic2" (-KPIC). */
+#define TARGET_ABICALLS_PIC2 \
+ (TARGET_ABICALLS && !TARGET_ABICALLS_PIC0)
+
/* True if the call patterns should be split into a jalr followed by
an instruction to restore $gp. It is only safe to split the load
- from the call when every use of $gp is explicit. */
+ from the call when every use of $gp is explicit.
+
+ See mips_must_initialize_gp_p for details about how we manage the
+ global pointer. */
#define TARGET_SPLIT_CALLS \
- (TARGET_EXPLICIT_RELOCS && TARGET_CALL_CLOBBERED_GP)
+ (TARGET_EXPLICIT_RELOCS && TARGET_CALL_CLOBBERED_GP && epilogue_completed)
/* True if we're generating a form of -mabicalls in which we can use
operators like %hi and %lo to refer to locally-binding symbols.
/* True if TARGET_USE_GOT and if $gp is a call-saved register. */
#define TARGET_CALL_SAVED_GP (TARGET_USE_GOT && !TARGET_CALL_CLOBBERED_GP)
+/* True if we should use .cprestore to store to the cprestore slot.
+
+ We continue to use .cprestore for explicit-reloc code so that JALs
+ inside inline asms will work correctly. */
+#define TARGET_CPRESTORE_DIRECTIVE \
+ (TARGET_ABICALLS_PIC2 && !TARGET_MIPS16)
+
+/* True if we can use the J and JAL instructions. */
+#define TARGET_ABSOLUTE_JUMPS \
+ (!flag_pic || TARGET_ABSOLUTE_ABICALLS)
+
/* True if indirect calls must use register class PIC_FN_ADDR_REG.
This is true for both the PIC and non-PIC VxWorks RTP modes. */
#define TARGET_USE_PIC_FN_ADDR_REG (TARGET_ABICALLS || TARGET_VXWORKS_RTP)
Although GAS does understand .gpdword, the SGI linker mishandles
the relocations GAS generates (R_MIPS_GPREL32 followed by R_MIPS_64).
We therefore disable GP-relative switch tables for n64 on IRIX targets. */
-#define TARGET_GPWORD (TARGET_ABICALLS && !(mips_abi == ABI_64 && TARGET_IRIX))
+#define TARGET_GPWORD \
+ (TARGET_ABICALLS \
+ && !TARGET_ABSOLUTE_ABICALLS \
+ && !(mips_abi == ABI_64 && TARGET_IRIX))
+
+/* True if the output must have a writable .eh_frame.
+ See ASM_PREFERRED_EH_DATA_FORMAT for details. */
+#ifdef HAVE_LD_PERSONALITY_RELAXATION
+#define TARGET_WRITABLE_EH_FRAME 0
+#else
+#define TARGET_WRITABLE_EH_FRAME (flag_pic && TARGET_SHARED)
+#endif
/* Generate mips16 code */
#define TARGET_MIPS16 ((target_flags & MASK_MIPS16) != 0)
-/* Generate mips16e code. Default 16bit ASE for mips32/mips32r2/mips64 */
+/* Generate mips16e code. Default 16bit ASE for mips32* and mips64* */
#define GENERATE_MIPS16E (TARGET_MIPS16 && mips_isa >= 32)
+/* Generate mips16e register save/restore sequences. */
+#define GENERATE_MIPS16E_SAVE_RESTORE (GENERATE_MIPS16E && mips_abi == ABI_32)
+
+/* True if we're generating a form of MIPS16 code in which general
+ text loads are allowed. */
+#define TARGET_MIPS16_TEXT_LOADS \
+ (TARGET_MIPS16 && mips_code_readable == CODE_READABLE_YES)
+
+/* True if we're generating a form of MIPS16 code in which PC-relative
+ loads are allowed. */
+#define TARGET_MIPS16_PCREL_LOADS \
+ (TARGET_MIPS16 && mips_code_readable >= CODE_READABLE_PCREL)
/* Generic ISA defines. */
#define ISA_MIPS1 (mips_isa == 1)
#define ISA_MIPS32 (mips_isa == 32)
#define ISA_MIPS32R2 (mips_isa == 33)
#define ISA_MIPS64 (mips_isa == 64)
+#define ISA_MIPS64R2 (mips_isa == 65)
/* Architecture target defines. */
+#define TARGET_LOONGSON_2E (mips_arch == PROCESSOR_LOONGSON_2E)
+#define TARGET_LOONGSON_2F (mips_arch == PROCESSOR_LOONGSON_2F)
+#define TARGET_LOONGSON_2EF (TARGET_LOONGSON_2E || TARGET_LOONGSON_2F)
#define TARGET_MIPS3900 (mips_arch == PROCESSOR_R3900)
#define TARGET_MIPS4000 (mips_arch == PROCESSOR_R4000)
#define TARGET_MIPS4120 (mips_arch == PROCESSOR_R4120)
#define TARGET_MIPS5500 (mips_arch == PROCESSOR_R5500)
#define TARGET_MIPS7000 (mips_arch == PROCESSOR_R7000)
#define TARGET_MIPS9000 (mips_arch == PROCESSOR_R9000)
+#define TARGET_OCTEON (mips_arch == PROCESSOR_OCTEON)
#define TARGET_SB1 (mips_arch == PROCESSOR_SB1 \
|| mips_arch == PROCESSOR_SB1A)
#define TARGET_SR71K (mips_arch == PROCESSOR_SR71000)
/* Scheduling target defines. */
+#define TUNE_20KC (mips_tune == PROCESSOR_20KC)
+#define TUNE_24K (mips_tune == PROCESSOR_24KC \
+ || mips_tune == PROCESSOR_24KF2_1 \
+ || mips_tune == PROCESSOR_24KF1_1)
+#define TUNE_74K (mips_tune == PROCESSOR_74KC \
+ || mips_tune == PROCESSOR_74KF2_1 \
+ || mips_tune == PROCESSOR_74KF1_1 \
+ || mips_tune == PROCESSOR_74KF3_2)
+#define TUNE_LOONGSON_2EF (mips_tune == PROCESSOR_LOONGSON_2E \
+ || mips_tune == PROCESSOR_LOONGSON_2F)
#define TUNE_MIPS3000 (mips_tune == PROCESSOR_R3000)
#define TUNE_MIPS3900 (mips_tune == PROCESSOR_R3900)
#define TUNE_MIPS4000 (mips_tune == PROCESSOR_R4000)
#define TUNE_MIPS6000 (mips_tune == PROCESSOR_R6000)
#define TUNE_MIPS7000 (mips_tune == PROCESSOR_R7000)
#define TUNE_MIPS9000 (mips_tune == PROCESSOR_R9000)
+#define TUNE_OCTEON (mips_tune == PROCESSOR_OCTEON)
#define TUNE_SB1 (mips_tune == PROCESSOR_SB1 \
|| mips_tune == PROCESSOR_SB1A)
-#define TUNE_74K (mips_tune == PROCESSOR_74KC \
- || mips_tune == PROCESSOR_74KF \
- || mips_tune == PROCESSOR_74KX)
+
+/* Whether vector modes and intrinsics for ST Microelectronics
+ Loongson-2E/2F processors should be enabled. In o32 pairs of
+ floating-point registers provide 64-bit values. */
+#define TARGET_LOONGSON_VECTORS (TARGET_HARD_FLOAT_ABI \
+ && TARGET_LOONGSON_2EF)
/* True if the pre-reload scheduler should try to create chains of
multiply-add or multiply-subtract instructions. For example,
than others, so this macro is defined on an opt-in basis. */
#define TUNE_MACC_CHAINS (TUNE_MIPS5500 \
|| TUNE_MIPS4120 \
- || TUNE_MIPS4130)
+ || TUNE_MIPS4130 \
+ || TUNE_24K)
#define TARGET_OLDABI (mips_abi == ABI_32 || mips_abi == ABI_O64)
#define TARGET_NEWABI (mips_abi == ABI_N32 || mips_abi == ABI_64)
+/* TARGET_HARD_FLOAT and TARGET_SOFT_FLOAT reflect whether the FPU is
+ directly accessible, while the command-line options select
+ TARGET_HARD_FLOAT_ABI and TARGET_SOFT_FLOAT_ABI to reflect the ABI
+ in use. */
+#define TARGET_HARD_FLOAT (TARGET_HARD_FLOAT_ABI && !TARGET_MIPS16)
+#define TARGET_SOFT_FLOAT (TARGET_SOFT_FLOAT_ABI || TARGET_MIPS16)
+
+/* False if SC acts as a memory barrier with respect to itself,
+ otherwise a SYNC will be emitted after SC for atomic operations
+ that require ordering between the SC and following loads and
+ stores. It does not tell anything about ordering of loads and
+ stores prior to and following the SC, only about the SC itself and
+ those loads and stores follow it. */
+#define TARGET_SYNC_AFTER_SC (!TARGET_OCTEON)
+
/* IRIX specific stuff. */
#define TARGET_IRIX 0
#define TARGET_IRIX6 0
while (0)
/* Target CPU builtins. */
-#define TARGET_CPU_CPP_BUILTINS() \
- do \
- { \
- /* Everyone but IRIX defines this to mips. */ \
- if (!TARGET_IRIX) \
- builtin_assert ("machine=mips"); \
- \
- builtin_assert ("cpu=mips"); \
- builtin_define ("__mips__"); \
- builtin_define ("_mips"); \
- \
- /* We do this here because __mips is defined below \
- and so we can't use builtin_define_std. */ \
- if (!flag_iso) \
- builtin_define ("mips"); \
- \
- if (TARGET_64BIT) \
- builtin_define ("__mips64"); \
- \
- if (!TARGET_IRIX) \
- { \
- /* Treat _R3000 and _R4000 like register-size \
- defines, which is how they've historically \
- been used. */ \
- if (TARGET_64BIT) \
- { \
- builtin_define_std ("R4000"); \
- builtin_define ("_R4000"); \
- } \
- else \
- { \
- builtin_define_std ("R3000"); \
- builtin_define ("_R3000"); \
- } \
- } \
- if (TARGET_FLOAT64) \
- builtin_define ("__mips_fpr=64"); \
- else \
- builtin_define ("__mips_fpr=32"); \
- \
- if (TARGET_MIPS16) \
- builtin_define ("__mips16"); \
- \
- if (TARGET_MIPS3D) \
- builtin_define ("__mips3d"); \
- \
- if (TARGET_DSP) \
- builtin_define ("__mips_dsp"); \
- \
- if (TARGET_DSPR2) \
- builtin_define ("__mips_dspr2"); \
- \
- MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
- MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
- \
- if (ISA_MIPS1) \
- { \
- builtin_define ("__mips=1"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS1"); \
- } \
- else if (ISA_MIPS2) \
- { \
- builtin_define ("__mips=2"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS2"); \
- } \
- else if (ISA_MIPS3) \
- { \
- builtin_define ("__mips=3"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS3"); \
- } \
- else if (ISA_MIPS4) \
- { \
- builtin_define ("__mips=4"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS4"); \
- } \
- else if (ISA_MIPS32) \
- { \
- builtin_define ("__mips=32"); \
- builtin_define ("__mips_isa_rev=1"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
- } \
- else if (ISA_MIPS32R2) \
- { \
- builtin_define ("__mips=32"); \
- builtin_define ("__mips_isa_rev=2"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
- } \
- else if (ISA_MIPS64) \
- { \
- builtin_define ("__mips=64"); \
- builtin_define ("__mips_isa_rev=1"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
- } \
- \
- if (TARGET_HARD_FLOAT) \
- builtin_define ("__mips_hard_float"); \
- else if (TARGET_SOFT_FLOAT) \
- builtin_define ("__mips_soft_float"); \
- \
- if (TARGET_SINGLE_FLOAT) \
- builtin_define ("__mips_single_float"); \
- \
- if (TARGET_PAIRED_SINGLE_FLOAT) \
- builtin_define ("__mips_paired_single_float"); \
- \
- if (TARGET_BIG_ENDIAN) \
- { \
- builtin_define_std ("MIPSEB"); \
- builtin_define ("_MIPSEB"); \
- } \
- else \
- { \
- builtin_define_std ("MIPSEL"); \
- builtin_define ("_MIPSEL"); \
- } \
- \
- /* Macros dependent on the C dialect. */ \
- if (preprocessing_asm_p ()) \
- { \
- builtin_define_std ("LANGUAGE_ASSEMBLY"); \
- builtin_define ("_LANGUAGE_ASSEMBLY"); \
- } \
- else if (c_dialect_cxx ()) \
- { \
- builtin_define ("_LANGUAGE_C_PLUS_PLUS"); \
- builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \
- builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \
- } \
- else \
- { \
- builtin_define_std ("LANGUAGE_C"); \
- builtin_define ("_LANGUAGE_C"); \
- } \
- if (c_dialect_objc ()) \
- { \
- builtin_define ("_LANGUAGE_OBJECTIVE_C"); \
- builtin_define ("__LANGUAGE_OBJECTIVE_C"); \
- /* Bizarre, but needed at least for Irix. */ \
- builtin_define_std ("LANGUAGE_C"); \
- builtin_define ("_LANGUAGE_C"); \
- } \
- \
- if (mips_abi == ABI_EABI) \
- builtin_define ("__mips_eabi"); \
- \
-} while (0)
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ /* Everyone but IRIX defines this to mips. */ \
+ if (!TARGET_IRIX) \
+ builtin_assert ("machine=mips"); \
+ \
+ builtin_assert ("cpu=mips"); \
+ builtin_define ("__mips__"); \
+ builtin_define ("_mips"); \
+ \
+ /* We do this here because __mips is defined below and so we \
+ can't use builtin_define_std. We don't ever want to define \
+ "mips" for VxWorks because some of the VxWorks headers \
+ construct include filenames from a root directory macro, \
+ an architecture macro and a filename, where the architecture \
+ macro expands to 'mips'. If we define 'mips' to 1, the \
+ architecture macro expands to 1 as well. */ \
+ if (!flag_iso && !TARGET_VXWORKS) \
+ builtin_define ("mips"); \
+ \
+ if (TARGET_64BIT) \
+ builtin_define ("__mips64"); \
+ \
+ if (!TARGET_IRIX) \
+ { \
+ /* Treat _R3000 and _R4000 like register-size \
+ defines, which is how they've historically \
+ been used. */ \
+ if (TARGET_64BIT) \
+ { \
+ builtin_define_std ("R4000"); \
+ builtin_define ("_R4000"); \
+ } \
+ else \
+ { \
+ builtin_define_std ("R3000"); \
+ builtin_define ("_R3000"); \
+ } \
+ } \
+ if (TARGET_FLOAT64) \
+ builtin_define ("__mips_fpr=64"); \
+ else \
+ builtin_define ("__mips_fpr=32"); \
+ \
+ if (mips_base_mips16) \
+ builtin_define ("__mips16"); \
+ \
+ if (TARGET_MIPS3D) \
+ builtin_define ("__mips3d"); \
+ \
+ if (TARGET_SMARTMIPS) \
+ builtin_define ("__mips_smartmips"); \
+ \
+ if (TARGET_DSP) \
+ { \
+ builtin_define ("__mips_dsp"); \
+ if (TARGET_DSPR2) \
+ { \
+ builtin_define ("__mips_dspr2"); \
+ builtin_define ("__mips_dsp_rev=2"); \
+ } \
+ else \
+ builtin_define ("__mips_dsp_rev=1"); \
+ } \
+ \
+ MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
+ MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
+ \
+ if (ISA_MIPS1) \
+ { \
+ builtin_define ("__mips=1"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS1"); \
+ } \
+ else if (ISA_MIPS2) \
+ { \
+ builtin_define ("__mips=2"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS2"); \
+ } \
+ else if (ISA_MIPS3) \
+ { \
+ builtin_define ("__mips=3"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS3"); \
+ } \
+ else if (ISA_MIPS4) \
+ { \
+ builtin_define ("__mips=4"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS4"); \
+ } \
+ else if (ISA_MIPS32) \
+ { \
+ builtin_define ("__mips=32"); \
+ builtin_define ("__mips_isa_rev=1"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
+ } \
+ else if (ISA_MIPS32R2) \
+ { \
+ builtin_define ("__mips=32"); \
+ builtin_define ("__mips_isa_rev=2"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
+ } \
+ else if (ISA_MIPS64) \
+ { \
+ builtin_define ("__mips=64"); \
+ builtin_define ("__mips_isa_rev=1"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
+ } \
+ else if (ISA_MIPS64R2) \
+ { \
+ builtin_define ("__mips=64"); \
+ builtin_define ("__mips_isa_rev=2"); \
+ builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
+ } \
+ \
+ switch (mips_abi) \
+ { \
+ case ABI_32: \
+ builtin_define ("_ABIO32=1"); \
+ builtin_define ("_MIPS_SIM=_ABIO32"); \
+ break; \
+ \
+ case ABI_N32: \
+ builtin_define ("_ABIN32=2"); \
+ builtin_define ("_MIPS_SIM=_ABIN32"); \
+ break; \
+ \
+ case ABI_64: \
+ builtin_define ("_ABI64=3"); \
+ builtin_define ("_MIPS_SIM=_ABI64"); \
+ break; \
+ \
+ case ABI_O64: \
+ builtin_define ("_ABIO64=4"); \
+ builtin_define ("_MIPS_SIM=_ABIO64"); \
+ break; \
+ } \
+ \
+ builtin_define_with_int_value ("_MIPS_SZINT", INT_TYPE_SIZE); \
+ builtin_define_with_int_value ("_MIPS_SZLONG", LONG_TYPE_SIZE); \
+ builtin_define_with_int_value ("_MIPS_SZPTR", POINTER_SIZE); \
+ builtin_define_with_int_value ("_MIPS_FPSET", \
+ 32 / MAX_FPRS_PER_FMT); \
+ \
+ /* These defines reflect the ABI in use, not whether the \
+ FPU is directly accessible. */ \
+ if (TARGET_HARD_FLOAT_ABI) \
+ builtin_define ("__mips_hard_float"); \
+ else \
+ builtin_define ("__mips_soft_float"); \
+ \
+ if (TARGET_SINGLE_FLOAT) \
+ builtin_define ("__mips_single_float"); \
+ \
+ if (TARGET_PAIRED_SINGLE_FLOAT) \
+ builtin_define ("__mips_paired_single_float"); \
+ \
+ if (TARGET_BIG_ENDIAN) \
+ { \
+ builtin_define_std ("MIPSEB"); \
+ builtin_define ("_MIPSEB"); \
+ } \
+ else \
+ { \
+ builtin_define_std ("MIPSEL"); \
+ builtin_define ("_MIPSEL"); \
+ } \
+ \
+ /* Whether calls should go through $25. The separate __PIC__ \
+ macro indicates whether abicalls code might use a GOT. */ \
+ if (TARGET_ABICALLS) \
+ builtin_define ("__mips_abicalls"); \
+ \
+ /* Whether Loongson vector modes are enabled. */ \
+ if (TARGET_LOONGSON_VECTORS) \
+ builtin_define ("__mips_loongson_vector_rev"); \
+ \
+ /* Historical Octeon macro. */ \
+ if (TARGET_OCTEON) \
+ builtin_define ("__OCTEON__"); \
+ \
+ /* Macros dependent on the C dialect. */ \
+ if (preprocessing_asm_p ()) \
+ { \
+ builtin_define_std ("LANGUAGE_ASSEMBLY"); \
+ builtin_define ("_LANGUAGE_ASSEMBLY"); \
+ } \
+ else if (c_dialect_cxx ()) \
+ { \
+ builtin_define ("_LANGUAGE_C_PLUS_PLUS"); \
+ builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \
+ builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \
+ } \
+ else \
+ { \
+ builtin_define_std ("LANGUAGE_C"); \
+ builtin_define ("_LANGUAGE_C"); \
+ } \
+ if (c_dialect_objc ()) \
+ { \
+ builtin_define ("_LANGUAGE_OBJECTIVE_C"); \
+ builtin_define ("__LANGUAGE_OBJECTIVE_C"); \
+ /* Bizarre, but needed at least for Irix. */ \
+ builtin_define_std ("LANGUAGE_C"); \
+ builtin_define ("_LANGUAGE_C"); \
+ } \
+ \
+ if (mips_abi == ABI_EABI) \
+ builtin_define ("__mips_eabi"); \
+ \
+ if (TARGET_CACHE_BUILTIN) \
+ builtin_define ("__GCC_HAVE_BUILTIN_MIPS_CACHE"); \
+ } \
+ while (0)
/* Default target_flags if no switches are specified */
#endif
#endif /* IN_LIBGCC2 */
+/* Force the call stack unwinders in unwind.inc not to be MIPS16 code
+ when compiled with hardware floating point. This is because MIPS16
+ code cannot save and restore the floating-point registers, which is
+ important if in a mixed MIPS16/non-MIPS16 environment. */
+
+#ifdef IN_LIBGCC2
+#if __mips_hard_float
+#define LIBGCC2_UNWIND_ATTRIBUTE __attribute__((__nomips16__))
+#endif
+#endif /* IN_LIBGCC2 */
+
#define TARGET_LIBGCC_SDATA_SECTION ".sdata"
#ifndef MULTILIB_ENDIAN_DEFAULT
# if MIPS_ISA_DEFAULT == 64
# define MULTILIB_ISA_DEFAULT "mips64"
# else
-# define MULTILIB_ISA_DEFAULT "mips1"
+# if MIPS_ISA_DEFAULT == 65
+# define MULTILIB_ISA_DEFAULT "mips64r2"
+# else
+# define MULTILIB_ISA_DEFAULT "mips1"
+# endif
# endif
# endif
# endif
# endif
#endif
+#ifndef MIPS_ABI_DEFAULT
+#define MIPS_ABI_DEFAULT ABI_32
+#endif
+
+/* Use the most portable ABI flag for the ASM specs. */
+
+#if MIPS_ABI_DEFAULT == ABI_32
+#define MULTILIB_ABI_DEFAULT "mabi=32"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_O64
+#define MULTILIB_ABI_DEFAULT "mabi=o64"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_N32
+#define MULTILIB_ABI_DEFAULT "mabi=n32"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_64
+#define MULTILIB_ABI_DEFAULT "mabi=64"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_EABI
+#define MULTILIB_ABI_DEFAULT "mabi=eabi"
+#endif
+
#ifndef MULTILIB_DEFAULTS
#define MULTILIB_DEFAULTS \
{ MULTILIB_ENDIAN_DEFAULT, MULTILIB_ISA_DEFAULT, MULTILIB_ABI_DEFAULT }
#endif
#endif
+/* A spec condition that matches all non-mips16 -mips arguments. */
+
+#define MIPS_ISA_LEVEL_OPTION_SPEC \
+ "mips1|mips2|mips3|mips4|mips32*|mips64*"
+
+/* A spec condition that matches all non-mips16 architecture arguments. */
+
+#define MIPS_ARCH_OPTION_SPEC \
+ MIPS_ISA_LEVEL_OPTION_SPEC "|march=*"
+
+/* A spec that infers a -mips argument from an -march argument,
+ or injects the default if no architecture is specified. */
+
+#define MIPS_ISA_LEVEL_SPEC \
+ "%{" MIPS_ISA_LEVEL_OPTION_SPEC ":;: \
+ %{march=mips1|march=r2000|march=r3000|march=r3900:-mips1} \
+ %{march=mips2|march=r6000:-mips2} \
+ %{march=mips3|march=r4*|march=vr4*|march=orion|march=loongson2*:-mips3} \
+ %{march=mips4|march=r8000|march=vr5*|march=rm7000|march=rm9000 \
+ |march=r10000|march=r12000|march=r14000|march=r16000:-mips4} \
+ %{march=mips32|march=4kc|march=4km|march=4kp|march=4ksc:-mips32} \
+ %{march=mips32r2|march=m4k|march=4ke*|march=4ksd|march=24k* \
+ |march=34k*|march=74k*|march=1004k*: -mips32r2} \
+ %{march=mips64|march=5k*|march=20k*|march=sb1*|march=sr71000 \
+ |march=xlr: -mips64} \
+ %{march=mips64r2|march=octeon: -mips64r2} \
+ %{!march=*: -" MULTILIB_ISA_DEFAULT "}}"
+
+/* A spec that infers a -mhard-float or -msoft-float setting from an
+ -march argument. Note that soft-float and hard-float code are not
+ link-compatible. */
+
+#define MIPS_ARCH_FLOAT_SPEC \
+ "%{mhard-float|msoft-float|march=mips*:; \
+ march=vr41*|march=m4k|march=4k*|march=24kc|march=24kec \
+ |march=34kc|march=74kc|march=1004kc|march=5kc \
+ |march=octeon|march=xlr: -msoft-float; \
+ march=*: -mhard-float}"
+
+/* A spec condition that matches 32-bit options. It only works if
+ MIPS_ISA_LEVEL_SPEC has been applied. */
+
+#define MIPS_32BIT_OPTION_SPEC \
+ "mips1|mips2|mips32*|mgp32"
+
+#if MIPS_ABI_DEFAULT == ABI_O64 \
+ || MIPS_ABI_DEFAULT == ABI_N32 \
+ || MIPS_ABI_DEFAULT == ABI_64
+#define OPT_ARCH64 "mabi=32|mgp32:;"
+#define OPT_ARCH32 "mabi=32|mgp32"
+#else
+#define OPT_ARCH64 "mabi=o64|mabi=n32|mabi=64|mgp64"
+#define OPT_ARCH32 "mabi=o64|mabi=n32|mabi=64|mgp64:;"
+#endif
+
/* Support for a compile-time default CPU, et cetera. The rules are:
--with-arch is ignored if -march is specified or a -mips is specified
- (other than -mips16).
- --with-tune is ignored if -mtune is specified.
+ (other than -mips16); likewise --with-arch-32 and --with-arch-64.
+ --with-tune is ignored if -mtune is specified; likewise
+ --with-tune-32 and --with-tune-64.
--with-abi is ignored if -mabi is specified.
--with-float is ignored if -mhard-float or -msoft-float are
specified.
--with-divide is ignored if -mdivide-traps or -mdivide-breaks are
specified. */
#define OPTION_DEFAULT_SPECS \
- {"arch", "%{!march=*:%{mips16:-march=%(VALUE)}%{!mips*:-march=%(VALUE)}}" }, \
+ {"arch", "%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}" }, \
+ {"arch_32", "%{" OPT_ARCH32 ":%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}}" }, \
+ {"arch_64", "%{" OPT_ARCH64 ":%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}}" }, \
{"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
+ {"tune_32", "%{" OPT_ARCH32 ":%{!mtune=*:-mtune=%(VALUE)}}" }, \
+ {"tune_64", "%{" OPT_ARCH64 ":%{!mtune=*:-mtune=%(VALUE)}}" }, \
{"abi", "%{!mabi=*:-mabi=%(VALUE)}" }, \
{"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }, \
- {"divide", "%{!mdivide-traps:%{!mdivide-breaks:-mdivide-%(VALUE)}}" }
+ {"divide", "%{!mdivide-traps:%{!mdivide-breaks:-mdivide-%(VALUE)}}" }, \
+ {"llsc", "%{!mllsc:%{!mno-llsc:-m%(VALUE)}}" }, \
+ {"mips-plt", "%{!mplt:%{!mno-plt:-m%(VALUE)}}" }, \
+ {"synci", "%{!msynci:%{!mno-synci:-m%(VALUE)}}" }
+
+/* A spec that infers the -mdsp setting from an -march argument. */
+#define BASE_DRIVER_SELF_SPECS \
+ "%{!mno-dsp:%{march=24ke*|march=34k*|march=74k*|march=1004k*: -mdsp}}"
+
+#define DRIVER_SELF_SPECS BASE_DRIVER_SELF_SPECS
#define GENERATE_DIVIDE_TRAPS (TARGET_DIVIDE_TRAPS \
&& ISA_HAS_COND_TRAP)
-#define GENERATE_BRANCHLIKELY (TARGET_BRANCHLIKELY \
- && !TARGET_SR71K \
- && !TARGET_MIPS16)
+#define GENERATE_BRANCHLIKELY (TARGET_BRANCHLIKELY && !TARGET_MIPS16)
/* True if the ABI can only work with 64-bit integer registers. We
generally allow ad-hoc variations for TARGET_SINGLE_FLOAT, but
/* Likewise for 32-bit regs. */
#define ABI_NEEDS_32BIT_REGS (mips_abi == ABI_32)
-/* True if symbols are 64 bits wide. At present, n64 is the only
- ABI for which this is true. */
-#define ABI_HAS_64BIT_SYMBOLS (mips_abi == ABI_64 && !TARGET_SYM32)
+/* True if the file format uses 64-bit symbols. At present, this is
+ only true for n64, which uses 64-bit ELF. */
+#define FILE_HAS_64BIT_SYMBOLS (mips_abi == ABI_64)
+
+/* True if symbols are 64 bits wide. This is usually determined by
+ the ABI's file format, but it can be overridden by -msym32. Note that
+ overriding the size with -msym32 changes the ABI of relocatable objects,
+ although it doesn't change the ABI of a fully-linked object. */
+#define ABI_HAS_64BIT_SYMBOLS (FILE_HAS_64BIT_SYMBOLS && !TARGET_SYM32)
/* ISA has instructions for managing 64-bit fp and gp regs (e.g. mips3). */
#define ISA_HAS_64BIT_REGS (ISA_MIPS3 \
|| ISA_MIPS4 \
- || ISA_MIPS64)
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2)
/* ISA has branch likely instructions (e.g. mips2). */
/* Disable branchlikely for tx39 until compare rewrite. They haven't
|| TARGET_MAD \
|| ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
+ && !TARGET_MIPS16)
+
+/* ISA has a three-operand multiplication instruction. */
+#define ISA_HAS_DMUL3 (TARGET_64BIT \
+ && TARGET_OCTEON \
&& !TARGET_MIPS16)
-/* ISA has the conditional move instructions introduced in mips4. */
-#define ISA_HAS_CONDMOVE ((ISA_MIPS4 \
+/* ISA has the floating-point conditional move instructions introduced
+ in mips4. */
+#define ISA_HAS_FP_CONDMOVE ((ISA_MIPS4 \
|| ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS5500 \
&& !TARGET_MIPS16)
+/* ISA has the integer conditional move instructions introduced in mips4 and
+ ST Loongson 2E/2F. */
+#define ISA_HAS_CONDMOVE (ISA_HAS_FP_CONDMOVE || TARGET_LOONGSON_2EF)
+
+/* ISA has LDC1 and SDC1. */
+#define ISA_HAS_LDC1_SDC1 (!ISA_MIPS1 && !TARGET_MIPS16)
+
/* ISA has the mips4 FP condition code instructions: FP-compare to CC,
branch on CC, and move (both FP and non-FP) on CC. */
#define ISA_HAS_8CC (ISA_MIPS4 \
|| ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64)
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2)
/* This is a catch all for other mips4 instructions: indexed load, the
FP madd and msub instructions, and the FP recip and recip sqrt
instructions. */
#define ISA_HAS_FP4 ((ISA_MIPS4 \
|| (ISA_MIPS32R2 && TARGET_FLOAT64) \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
+/* ISA has paired-single instructions. */
+#define ISA_HAS_PAIRED_SINGLE (ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2)
+
/* ISA has conditional trap instructions. */
#define ISA_HAS_COND_TRAP (!ISA_MIPS1 \
&& !TARGET_MIPS16)
/* ISA has integer multiply-accumulate instructions, madd and msub. */
#define ISA_HAS_MADD_MSUB ((ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* Integer multiply-accumulate instructions should be generated. */
#define GENERATE_MADD_MSUB (ISA_HAS_MADD_MSUB && !TUNE_74K)
-/* ISA has floating-point nmadd and nmsub instructions. */
-#define ISA_HAS_NMADD_NMSUB ((ISA_MIPS4 \
- || ISA_MIPS64) \
+/* ISA has floating-point madd and msub instructions 'd = a * b [+-] c'. */
+#define ISA_HAS_FP_MADD4_MSUB4 ISA_HAS_FP4
+
+/* ISA has floating-point madd and msub instructions 'c = a * b [+-] c'. */
+#define ISA_HAS_FP_MADD3_MSUB3 TARGET_LOONGSON_2EF
+
+/* ISA has floating-point nmadd and nmsub instructions
+ 'd = -((a * b) [+-] c)'. */
+#define ISA_HAS_NMADD4_NMSUB4(MODE) \
+ ((ISA_MIPS4 \
+ || (ISA_MIPS32R2 && (MODE) == V2SFmode) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& (!TARGET_MIPS5400 || TARGET_MAD) \
&& !TARGET_MIPS16)
+/* ISA has floating-point nmadd and nmsub instructions
+ 'c = -((a * b) [+-] c)'. */
+#define ISA_HAS_NMADD3_NMSUB3(MODE) \
+ TARGET_LOONGSON_2EF
+
/* ISA has count leading zeroes/ones instruction (not implemented). */
#define ISA_HAS_CLZ_CLO ((ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* ISA has three operand multiply instructions that put
/* ISA has the "ror" (rotate right) instructions. */
#define ISA_HAS_ROR ((ISA_MIPS32R2 \
+ || ISA_MIPS64R2 \
|| TARGET_MIPS5400 \
|| TARGET_MIPS5500 \
- || TARGET_SR71K) \
+ || TARGET_SR71K \
+ || TARGET_SMARTMIPS) \
&& !TARGET_MIPS16)
/* ISA has data prefetch instructions. This controls use of 'pref'. */
#define ISA_HAS_PREFETCH ((ISA_MIPS4 \
+ || TARGET_LOONGSON_2EF \
|| ISA_MIPS32 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* ISA has data indexed prefetch instructions. This controls use of
enabled.) */
#define ISA_HAS_PREFETCHX ((ISA_MIPS4 \
|| ISA_MIPS32R2 \
- || ISA_MIPS64) \
+ || ISA_MIPS64 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* True if trunc.w.s and trunc.w.d are real (not synthetic)
#define ISA_HAS_TRUNC_W (!ISA_MIPS1)
/* ISA includes the MIPS32r2 seb and seh instructions. */
-#define ISA_HAS_SEB_SEH (ISA_MIPS32R2 \
+#define ISA_HAS_SEB_SEH ((ISA_MIPS32R2 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* ISA includes the MIPS32/64 rev 2 ext and ins instructions. */
-#define ISA_HAS_EXT_INS (ISA_MIPS32R2 \
+#define ISA_HAS_EXT_INS ((ISA_MIPS32R2 \
+ || ISA_MIPS64R2) \
&& !TARGET_MIPS16)
/* ISA has instructions for accessing top part of 64-bit fp regs. */
-#define ISA_HAS_MXHC1 (TARGET_FLOAT64 && ISA_MIPS32R2)
+#define ISA_HAS_MXHC1 (TARGET_FLOAT64 \
+ && (ISA_MIPS32R2 \
+ || ISA_MIPS64R2))
+
+/* ISA has lwxs instruction (load w/scaled index address. */
+#define ISA_HAS_LWXS (TARGET_SMARTMIPS && !TARGET_MIPS16)
+
+/* The DSP ASE is available. */
+#define ISA_HAS_DSP (TARGET_DSP && !TARGET_MIPS16)
+
+/* Revision 2 of the DSP ASE is available. */
+#define ISA_HAS_DSPR2 (TARGET_DSPR2 && !TARGET_MIPS16)
/* True if the result of a load is not available to the next instruction.
A nop will then be needed between instructions like "lw $4,..."
&& !TARGET_MIPS16)
/* Likewise mtc1 and mfc1. */
-#define ISA_HAS_XFER_DELAY (mips_isa <= 3)
+#define ISA_HAS_XFER_DELAY (mips_isa <= 3 \
+ && !TARGET_LOONGSON_2EF)
/* Likewise floating-point comparisons. */
-#define ISA_HAS_FCMP_DELAY (mips_isa <= 3)
+#define ISA_HAS_FCMP_DELAY (mips_isa <= 3 \
+ && !TARGET_LOONGSON_2EF)
/* True if mflo and mfhi can be immediately followed by instructions
which write to the HI and LO registers.
#define ISA_HAS_HILO_INTERLOCKS (ISA_MIPS32 \
|| ISA_MIPS32R2 \
|| ISA_MIPS64 \
- || TARGET_MIPS5500)
+ || ISA_MIPS64R2 \
+ || TARGET_MIPS5500 \
+ || TARGET_LOONGSON_2EF)
+
+/* ISA includes synci, jr.hb and jalr.hb. */
+#define ISA_HAS_SYNCI ((ISA_MIPS32R2 \
+ || ISA_MIPS64R2) \
+ && !TARGET_MIPS16)
+
+/* ISA includes sync. */
+#define ISA_HAS_SYNC ((mips_isa >= 2 || TARGET_MIPS3900) && !TARGET_MIPS16)
+#define GENERATE_SYNC \
+ (target_flags_explicit & MASK_LLSC \
+ ? TARGET_LLSC && !TARGET_MIPS16 \
+ : ISA_HAS_SYNC)
+
+/* ISA includes ll and sc. Note that this implies ISA_HAS_SYNC
+ because the expanders use both ISA_HAS_SYNC and ISA_HAS_LL_SC
+ instructions. */
+#define ISA_HAS_LL_SC (mips_isa >= 2 && !TARGET_MIPS16)
+#define GENERATE_LL_SC \
+ (target_flags_explicit & MASK_LLSC \
+ ? TARGET_LLSC && !TARGET_MIPS16 \
+ : ISA_HAS_LL_SC)
+
+/* ISA includes the baddu instruction. */
+#define ISA_HAS_BADDU (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* ISA includes the bbit* instructions. */
+#define ISA_HAS_BBIT (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* ISA includes the cins instruction. */
+#define ISA_HAS_CINS (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* ISA includes the exts instruction. */
+#define ISA_HAS_EXTS (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* ISA includes the seq and sne instructions. */
+#define ISA_HAS_SEQ_SNE (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* ISA includes the pop instruction. */
+#define ISA_HAS_POP (TARGET_OCTEON && !TARGET_MIPS16)
+
+/* The CACHE instruction is available in non-MIPS16 code. */
+#define TARGET_CACHE_BUILTIN (mips_isa >= 3)
+
+/* The CACHE instruction is available. */
+#define ISA_HAS_CACHE (TARGET_CACHE_BUILTIN && !TARGET_MIPS16)
\f
/* Add -G xx support. */
#define SWITCH_TAKES_ARG(CHAR) \
(DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
-#define OVERRIDE_OPTIONS override_options ()
+#define OVERRIDE_OPTIONS mips_override_options ()
#define CONDITIONAL_REGISTER_USAGE mips_conditional_register_usage ()
#endif
\f
-#ifndef MIPS_ABI_DEFAULT
-#define MIPS_ABI_DEFAULT ABI_32
-#endif
-
-/* Use the most portable ABI flag for the ASM specs. */
-
-#if MIPS_ABI_DEFAULT == ABI_32
-#define MULTILIB_ABI_DEFAULT "mabi=32"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_O64
-#define MULTILIB_ABI_DEFAULT "mabi=o64"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_N32
-#define MULTILIB_ABI_DEFAULT "mabi=n32"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_64
-#define MULTILIB_ABI_DEFAULT "mabi=64"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_EABI
-#define MULTILIB_ABI_DEFAULT "mabi=eabi"
-#endif
-
/* SUBTARGET_ASM_OPTIMIZING_SPEC handles passing optimization options
to the assembler. It may be overridden by subtargets. */
#ifndef SUBTARGET_ASM_OPTIMIZING_SPEC
#undef ASM_SPEC
#define ASM_SPEC "\
%{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} \
-%{mips32} %{mips32r2} %{mips64} \
-%{mips16:%{!mno-mips16:-mips16}} %{mno-mips16:-no-mips16} \
-%{mips3d:-mips3d} \
-%{mdsp} \
-%{mdspr2} \
+%{mips32*} %{mips64*} \
+%{mips16} %{mno-mips16:-no-mips16} \
+%{mips3d} %{mno-mips3d:-no-mips3d} \
+%{mdmx} %{mno-mdmx:-no-mdmx} \
+%{mdsp} %{mno-dsp} \
+%{mdspr2} %{mno-dspr2} \
+%{msmartmips} %{mno-smartmips} \
+%{mmt} %{mno-mt} \
%{mfix-vr4120} %{mfix-vr4130} \
%(subtarget_asm_optimizing_spec) \
%(subtarget_asm_debugging_spec) \
-%{mabi=*} %{!mabi*: %(asm_abi_default_spec)} \
+%{mabi=*} %{!mabi=*: %(asm_abi_default_spec)} \
%{mgp32} %{mgp64} %{march=*} %{mxgot:-xgot} \
%{mfp32} %{mfp64} \
%{mshared} %{mno-shared} \
#ifndef LINK_SPEC
#define LINK_SPEC "\
%(endian_spec) \
-%{G*} %{mips1} %{mips2} %{mips3} %{mips4} %{mips32} %{mips32r2} %{mips64} \
+%{G*} %{mips1} %{mips2} %{mips3} %{mips4} %{mips32*} %{mips64*} \
%{bestGnum} %{shared} %{non_shared}"
#endif /* LINK_SPEC defined */
#endif
\f
#define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
-#define MIPS_DEBUGGING_INFO 1 /* MIPS specific debugging info */
#define DWARF2_DEBUGGING_INFO 1 /* dwarf2 debugging info */
#ifndef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
#endif
-#define DWARF2_ADDR_SIZE (ABI_HAS_64BIT_SYMBOLS ? 8 : 4)
+/* The size of DWARF addresses should be the same as the size of symbols
+ in the target file format. They shouldn't depend on things like -msym32,
+ because many DWARF consumers do not allow the mixture of address sizes
+ that one would then get from linking -msym32 code with -msym64 code.
+
+ Note that the default POINTER_SIZE test is not appropriate for MIPS.
+ EABI64 has 64-bit pointers but uses 32-bit ELF. */
+#define DWARF2_ADDR_SIZE (FILE_HAS_64BIT_SYMBOLS ? 8 : 4)
/* By default, turn on GDB extensions. */
#define DEFAULT_GDB_EXTENSIONS 1
#define DBX_CONTIN_LENGTH 1500
/* How to renumber registers for dbx and gdb. */
-#define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[ (REGNO) ]
+#define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[REGNO]
/* The mapping from gcc register number to DWARF 2 CFA column number. */
-#define DWARF_FRAME_REGNUM(REG) (REG)
+#define DWARF_FRAME_REGNUM(REGNO) mips_dwarf_regno[REGNO]
/* The DWARF 2 CFA column which tracks the return address. */
-#define DWARF_FRAME_RETURN_COLUMN (GP_REG_FIRST + 31)
-
-/* The DWARF 2 CFA column which tracks the return address from a
- signal handler context. */
-#define SIGNAL_UNWIND_RETURN_COLUMN (FP_REG_LAST + 1)
+#define DWARF_FRAME_RETURN_COLUMN RETURN_ADDR_REGNUM
/* Before the prologue, RA lives in r31. */
-#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, GP_REG_FIRST + 31)
+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, RETURN_ADDR_REGNUM)
/* Describe how we implement __builtin_eh_return. */
#define EH_RETURN_DATA_REGNO(N) \
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, GP_REG_FIRST + 3)
+#define EH_USES(N) mips_eh_uses (N)
+
/* Offsets recorded in opcodes are a multiple of this alignment factor.
The default for this in 64-bit mode is 8, which causes problems with
SFmode register saves. */
/* For MIPS, width of a floating point register. */
#define UNITS_PER_FPREG (TARGET_FLOAT64 ? 8 : 4)
-/* If register $f0 holds a floating-point value, $f(0 + FP_INC) is
- the next available register. */
-#define FP_INC (TARGET_FLOAT64 || TARGET_SINGLE_FLOAT ? 1 : 2)
+/* The number of consecutive floating-point registers needed to store the
+ largest format supported by the FPU. */
+#define MAX_FPRS_PER_FMT (TARGET_FLOAT64 || TARGET_SINGLE_FLOAT ? 1 : 2)
+
+/* The number of consecutive floating-point registers needed to store the
+ smallest format supported by the FPU. */
+#define MIN_FPRS_PER_FMT \
+ (ISA_MIPS32 || ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2 \
+ ? 1 : MAX_FPRS_PER_FMT)
/* The largest size of value that can be held in floating-point
registers and moved with a single instruction. */
-#define UNITS_PER_HWFPVALUE (TARGET_SOFT_FLOAT ? 0 : FP_INC * UNITS_PER_FPREG)
+#define UNITS_PER_HWFPVALUE \
+ (TARGET_SOFT_FLOAT_ABI ? 0 : MAX_FPRS_PER_FMT * UNITS_PER_FPREG)
/* The largest size of value that can be held in floating-point
registers. */
#define UNITS_PER_FPVALUE \
- (TARGET_SOFT_FLOAT ? 0 \
+ (TARGET_SOFT_FLOAT_ABI ? 0 \
: TARGET_SINGLE_FLOAT ? UNITS_PER_FPREG \
: LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT)
/* The number of bytes in a double. */
#define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
-#define UNITS_PER_SIMD_WORD (TARGET_PAIRED_SINGLE_FLOAT ? 8 : UNITS_PER_WORD)
+#define UNITS_PER_SIMD_WORD(MODE) \
+ (TARGET_PAIRED_SINGLE_FLOAT ? 8 : UNITS_PER_WORD)
/* Set the sizes of the core types. */
#define SHORT_TYPE_SIZE 16
#define DOUBLE_TYPE_SIZE 64
#define LONG_DOUBLE_TYPE_SIZE (TARGET_NEWABI ? 128 : 64)
+/* Define the sizes of fixed-point types. */
+#define SHORT_FRACT_TYPE_SIZE 8
+#define FRACT_TYPE_SIZE 16
+#define LONG_FRACT_TYPE_SIZE 32
+#define LONG_LONG_FRACT_TYPE_SIZE 64
+
+#define SHORT_ACCUM_TYPE_SIZE 16
+#define ACCUM_TYPE_SIZE 32
+#define LONG_ACCUM_TYPE_SIZE 64
+/* FIXME. LONG_LONG_ACCUM_TYPE_SIZE should be 128 bits, but GCC
+ doesn't support 128-bit integers for MIPS32 currently. */
+#define LONG_LONG_ACCUM_TYPE_SIZE (TARGET_64BIT ? 128 : 64)
+
/* long double is not a fixed mode, but the idea is that, if we
support long double, we also want a 128-bit integer type. */
#define MAX_FIXED_MODE_SIZE LONG_DOUBLE_TYPE_SIZE
|| TREE_CODE (TYPE) == UNION_TYPE \
|| TREE_CODE (TYPE) == RECORD_TYPE)) ? BITS_PER_WORD : (ALIGN))
-
+/* We need this for the same reason as DATA_ALIGNMENT, namely to cause
+ character arrays to be word-aligned so that `strcpy' calls that copy
+ constants to character arrays can be done inline, and 'strcmp' can be
+ optimised to use word loads. */
+#define LOCAL_ALIGNMENT(TYPE, ALIGN) \
+ DATA_ALIGNMENT (TYPE, ALIGN)
+
#define PAD_VARARGS_DOWN \
(FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
(MODE) = Pmode; \
}
+/* Pmode is always the same as ptr_mode, but not always the same as word_mode.
+ Extensions of pointers to word_mode must be signed. */
+#define POINTERS_EXTEND_UNSIGNED false
+
/* Define if loading short immediate values into registers sign extends. */
#define SHORT_IMMEDIATES_SIGN_EXTEND
/* The [d]clz instructions have the natural values at 0. */
#define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
- ((VALUE) = GET_MODE_BITSIZE (MODE), true)
+ ((VALUE) = GET_MODE_BITSIZE (MODE), 2)
\f
/* Standard register usage. */
- 8 condition code registers
- 2 accumulator registers (hi and lo)
- 32 registers each for coprocessors 0, 2 and 3
- - 3 fake registers:
+ - 4 fake registers:
- ARG_POINTER_REGNUM
- FRAME_POINTER_REGNUM
- - FAKE_CALL_REGNO (see the comment above load_callsi for details)
- - 3 dummy entries that were used at various times in the past.
+ - GOT_VERSION_REGNUM (see the comment above load_call<mode> for details)
+ - CPRESTORE_SLOT_REGNUM
+ - 2 dummy entries that were used at various times in the past.
- 6 DSP accumulator registers (3 hi-lo pairs) for MIPS DSP ASE
- 6 DSP control registers */
Regarding coprocessor registers: without evidence to the contrary,
it's best to assume that each coprocessor register has a unique
- use. This can be overridden, in, e.g., override_options() or
+ use. This can be overridden, in, e.g., mips_override_options or
CONDITIONAL_REGISTER_USAGE should the assumption be inappropriate
for a particular target. */
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
/* Others. */ \
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, \
/* COP0 registers */ \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
#define GP_REG_LAST 31
#define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
#define GP_DBX_FIRST 0
+#define K0_REG_NUM (GP_REG_FIRST + 26)
+#define K1_REG_NUM (GP_REG_FIRST + 27)
+#define KERNEL_REG_P(REGNO) (IN_RANGE (REGNO, K0_REG_NUM, K1_REG_NUM))
#define FP_REG_FIRST 32
#define FP_REG_LAST 63
#define MD_REG_NUM (MD_REG_LAST - MD_REG_FIRST + 1)
#define MD_DBX_FIRST (FP_DBX_FIRST + FP_REG_NUM)
+/* The DWARF 2 CFA column which tracks the return address from a
+ signal handler context. This means that to maintain backwards
+ compatibility, no hard register can be assigned this column if it
+ would need to be handled by the DWARF unwinder. */
+#define DWARF_ALT_FRAME_RETURN_COLUMN 66
+
#define ST_REG_FIRST 67
#define ST_REG_LAST 74
#define ST_REG_NUM (ST_REG_LAST - ST_REG_FIRST + 1)
#define COP0_REG_LAST 111
#define COP0_REG_NUM (COP0_REG_LAST - COP0_REG_FIRST + 1)
+#define COP0_STATUS_REG_NUM (COP0_REG_FIRST + 12)
+#define COP0_CAUSE_REG_NUM (COP0_REG_FIRST + 13)
+#define COP0_EPC_REG_NUM (COP0_REG_FIRST + 14)
+
#define COP2_REG_FIRST 112
#define COP2_REG_LAST 143
#define COP2_REG_NUM (COP2_REG_LAST - COP2_REG_FIRST + 1)
#define DSP_ACC_REG_NUM (DSP_ACC_REG_LAST - DSP_ACC_REG_FIRST + 1)
#define AT_REGNUM (GP_REG_FIRST + 1)
-#define HI_REGNUM (MD_REG_FIRST + 0)
-#define LO_REGNUM (MD_REG_FIRST + 1)
-#define AC1HI_REGNUM (DSP_ACC_REG_FIRST + 0)
-#define AC1LO_REGNUM (DSP_ACC_REG_FIRST + 1)
-#define AC2HI_REGNUM (DSP_ACC_REG_FIRST + 2)
-#define AC2LO_REGNUM (DSP_ACC_REG_FIRST + 3)
-#define AC3HI_REGNUM (DSP_ACC_REG_FIRST + 4)
-#define AC3LO_REGNUM (DSP_ACC_REG_FIRST + 5)
+#define HI_REGNUM (TARGET_BIG_ENDIAN ? MD_REG_FIRST : MD_REG_FIRST + 1)
+#define LO_REGNUM (TARGET_BIG_ENDIAN ? MD_REG_FIRST + 1 : MD_REG_FIRST)
+
+/* A few bitfield locations for the coprocessor registers. */
+/* Request Interrupt Priority Level is from bit 10 to bit 15 of
+ the cause register for the EIC interrupt mode. */
+#define CAUSE_IPL 10
+/* Interrupt Priority Level is from bit 10 to bit 15 of the status register. */
+#define SR_IPL 10
+/* Exception Level is at bit 1 of the status register. */
+#define SR_EXL 1
+/* Interrupt Enable is at bit 0 of the status register. */
+#define SR_IE 0
/* FPSW_REGNUM is the single condition code used if !ISA_HAS_8CC.
If ISA_HAS_8CC, it should not be used, and an arbitrary ST_REG
/* Test if REGNO is hi, lo, or one of the 6 new DSP accumulators. */
#define ACC_REG_P(REGNO) \
(MD_REG_P (REGNO) || DSP_ACC_REG_P (REGNO))
-/* Test if REGNO is HI or the first register of 3 new DSP accumulator pairs. */
-#define ACC_HI_REG_P(REGNO) \
- ((REGNO) == HI_REGNUM || (REGNO) == AC1HI_REGNUM || (REGNO) == AC2HI_REGNUM \
- || (REGNO) == AC3HI_REGNUM)
#define FP_REG_RTX_P(X) (REG_P (X) && FP_REG_P (REGNO (X)))
#define HARD_REGNO_NREGS(REGNO, MODE) mips_hard_regno_nregs (REGNO, MODE)
-/* To make the code simpler, HARD_REGNO_MODE_OK just references an
- array built in override_options. Because machmodes.h is not yet
- included before this file is processed, the MODE bound can't be
- expressed here. */
-
-extern char mips_hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER];
-
#define HARD_REGNO_MODE_OK(REGNO, MODE) \
mips_hard_regno_mode_ok[ (int)(MODE) ][ (REGNO) ]
-/* Value is 1 if it is a good idea to tie two pseudo registers
- when one has mode MODE1 and one has mode MODE2.
- If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
- for any hard reg, then this must be 0 for correct output. */
-#define MODES_TIEABLE_P(MODE1, MODE2) \
- ((GET_MODE_CLASS (MODE1) == MODE_FLOAT || \
- GET_MODE_CLASS (MODE1) == MODE_COMPLEX_FLOAT) \
- == (GET_MODE_CLASS (MODE2) == MODE_FLOAT || \
- GET_MODE_CLASS (MODE2) == MODE_COMPLEX_FLOAT))
+#define MODES_TIEABLE_P mips_modes_tieable_p
/* Register to use for pushing function arguments. */
#define STACK_POINTER_REGNUM (GP_REG_FIRST + 29)
#define HARD_FRAME_POINTER_REGNUM \
(TARGET_MIPS16 ? GP_REG_FIRST + 17 : GP_REG_FIRST + 30)
-/* Value should be nonzero if functions must have frame pointers.
- Zero means the frame pointer need not be set up (and parms
- may be accessed via the stack pointer) in functions that seem suitable.
- This is computed in `reload', in reload1.c. */
-#define FRAME_POINTER_REQUIRED (current_function_calls_alloca)
-
/* Register in which static-chain is passed to a function. */
-#define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 2)
+#define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 15)
+
+/* Registers used as temporaries in prologue/epilogue code:
+
+ - If a MIPS16 PIC function needs access to _gp, it first loads
+ the value into MIPS16_PIC_TEMP and then copies it to $gp.
-/* Registers used as temporaries in prologue/epilogue code. If we're
- generating mips16 code, these registers must come from the core set
- of 8. The prologue register mustn't conflict with any incoming
- arguments, the static chain pointer, or the frame pointer. The
- epilogue temporary mustn't conflict with the return registers, the
- frame pointer, the EH stack adjustment, or the EH data registers. */
+ - The prologue can use MIPS_PROLOGUE_TEMP as a general temporary
+ register. The register must not conflict with MIPS16_PIC_TEMP.
-#define MIPS_PROLOGUE_TEMP_REGNUM (GP_REG_FIRST + 3)
-#define MIPS_EPILOGUE_TEMP_REGNUM (GP_REG_FIRST + (TARGET_MIPS16 ? 6 : 8))
+ - The epilogue can use MIPS_EPILOGUE_TEMP as a general temporary
+ register.
+ If we're generating MIPS16 code, these registers must come from the
+ core set of 8. The prologue registers mustn't conflict with any
+ incoming arguments, the static chain pointer, or the frame pointer.
+ The epilogue temporary mustn't conflict with the return registers,
+ the PIC call register ($25), the frame pointer, the EH stack adjustment,
+ or the EH data registers.
+
+ If we're generating interrupt handlers, we use K0 as a temporary register
+ in prologue/epilogue code. */
+
+#define MIPS16_PIC_TEMP_REGNUM (GP_REG_FIRST + 2)
+#define MIPS_PROLOGUE_TEMP_REGNUM \
+ (cfun->machine->interrupt_handler_p ? K0_REG_NUM : GP_REG_FIRST + 3)
+#define MIPS_EPILOGUE_TEMP_REGNUM \
+ (cfun->machine->interrupt_handler_p \
+ ? K0_REG_NUM \
+ : GP_REG_FIRST + (TARGET_MIPS16 ? 6 : 8))
+
+#define MIPS16_PIC_TEMP gen_rtx_REG (Pmode, MIPS16_PIC_TEMP_REGNUM)
#define MIPS_PROLOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_PROLOGUE_TEMP_REGNUM)
#define MIPS_EPILOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_EPILOGUE_TEMP_REGNUM)
enum reg_class
{
NO_REGS, /* no registers in set */
- M16_NA_REGS, /* mips16 regs not used to pass args */
M16_REGS, /* mips16 directly accessible registers */
T_REG, /* mips16 T register ($24) */
M16_T_REGS, /* mips16 registers plus T register */
LEA_REGS, /* Every GPR except $25 */
GR_REGS, /* integer registers */
FP_REGS, /* floating point registers */
- HI_REG, /* hi register */
- LO_REG, /* lo register */
+ MD0_REG, /* first multiply/divide register */
+ MD1_REG, /* second multiply/divide register */
MD_REGS, /* multiply/divide registers (hi/lo) */
COP0_REGS, /* generic coprocessor classes */
COP2_REGS,
COP3_REGS,
- HI_AND_GR_REGS, /* union classes */
- LO_AND_GR_REGS,
- HI_AND_FP_REGS,
- COP0_AND_GR_REGS,
- COP2_AND_GR_REGS,
- COP3_AND_GR_REGS,
- ALL_COP_REGS,
- ALL_COP_AND_GR_REGS,
ST_REGS, /* status registers (fp status) */
DSP_ACC_REGS, /* DSP accumulator registers */
ACC_REGS, /* Hi/Lo and DSP accumulator registers */
+ FRAME_REGS, /* $arg and $frame */
+ GR_AND_MD0_REGS, /* union classes */
+ GR_AND_MD1_REGS,
+ GR_AND_MD_REGS,
+ GR_AND_ACC_REGS,
ALL_REGS, /* all registers */
LIM_REG_CLASSES /* max value + 1 */
};
#define REG_CLASS_NAMES \
{ \
"NO_REGS", \
- "M16_NA_REGS", \
"M16_REGS", \
"T_REG", \
"M16_T_REGS", \
"LEA_REGS", \
"GR_REGS", \
"FP_REGS", \
- "HI_REG", \
- "LO_REG", \
+ "MD0_REG", \
+ "MD1_REG", \
"MD_REGS", \
/* coprocessor registers */ \
"COP0_REGS", \
"COP2_REGS", \
"COP3_REGS", \
- "HI_AND_GR_REGS", \
- "LO_AND_GR_REGS", \
- "HI_AND_FP_REGS", \
- "COP0_AND_GR_REGS", \
- "COP2_AND_GR_REGS", \
- "COP3_AND_GR_REGS", \
- "ALL_COP_REGS", \
- "ALL_COP_AND_GR_REGS", \
"ST_REGS", \
"DSP_ACC_REGS", \
"ACC_REGS", \
+ "FRAME_REGS", \
+ "GR_AND_MD0_REGS", \
+ "GR_AND_MD1_REGS", \
+ "GR_AND_MD_REGS", \
+ "GR_AND_ACC_REGS", \
"ALL_REGS" \
}
#define REG_CLASS_CONTENTS \
{ \
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* no registers */ \
- { 0x0003000c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 nonarg regs */\
- { 0x000300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 registers */ \
- { 0x01000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 T register */ \
- { 0x010300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 and T regs */ \
- { 0x02000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* SVR4 PIC function address register */ \
- { 0x00000008, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* only $v1 */ \
- { 0xfdffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* Every other GPR except $25 */ \
- { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* integer registers */ \
- { 0x00000000, 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* floating registers*/ \
- { 0x00000000, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* hi register */ \
- { 0x00000000, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* lo register */ \
- { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* mul/div registers */ \
- { 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, /* cop0 registers */ \
- { 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, /* cop2 registers */ \
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, /* cop3 registers */ \
- { 0xffffffff, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* union classes */ \
- { 0xffffffff, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, \
- { 0x00000000, 0xffffffff, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, \
- { 0xffffffff, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, \
- { 0xffffffff, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, \
- { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, \
- { 0x00000000, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
- { 0xffffffff, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
- { 0x00000000, 0x00000000, 0x000007f8, 0x00000000, 0x00000000, 0x00000000 }, /* status registers */ \
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x003f0000 }, /* dsp accumulator registers */ \
- { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* hi/lo and dsp accumulator registers */ \
- { 0xffffffff, 0xffffffff, 0xffff07ff, 0xffffffff, 0xffffffff, 0x0fffffff } /* all registers */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
+ { 0x000300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_REGS */ \
+ { 0x01000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* T_REG */ \
+ { 0x010300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_T_REGS */ \
+ { 0x02000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* PIC_FN_ADDR_REG */ \
+ { 0x00000008, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* V1_REG */ \
+ { 0xfdffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* LEA_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* GR_REGS */ \
+ { 0x00000000, 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* FP_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* MD0_REG */ \
+ { 0x00000000, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* MD1_REG */ \
+ { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* MD_REGS */ \
+ { 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, /* COP0_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, /* COP2_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, /* COP3_REGS */ \
+ { 0x00000000, 0x00000000, 0x000007f8, 0x00000000, 0x00000000, 0x00000000 }, /* ST_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x003f0000 }, /* DSP_ACC_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* ACC_REGS */ \
+ { 0x00000000, 0x00000000, 0x00006000, 0x00000000, 0x00000000, 0x00000000 }, /* FRAME_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD0_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD1_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* GR_AND_ACC_REGS */ \
+ { 0xffffffff, 0xffffffff, 0xffff67ff, 0xffffffff, 0xffffffff, 0x0fffffff } /* ALL_REGS */ \
}
choose a class which is "minimal", meaning that no smaller class
also contains the register. */
-extern const enum reg_class mips_regno_to_class[];
-
#define REGNO_REG_CLASS(REGNO) mips_regno_to_class[ (REGNO) ]
/* A macro whose definition is the name of the class to which a
#define INDEX_REG_CLASS NO_REGS
-/* When SMALL_REGISTER_CLASSES is nonzero, the compiler allows
+/* When this hook returns true for MODE, the compiler allows
registers explicitly used in the rtl to be used as spill registers
but prevents the compiler from extending the lifetime of these
registers. */
+#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P \
+ mips_small_register_classes_for_mode_p
-#define SMALL_REGISTER_CLASSES (TARGET_MIPS16)
-
-/* This macro is used later on in the file. */
-#define GR_REG_CLASS_P(CLASS) \
- ((CLASS) == GR_REGS || (CLASS) == M16_REGS || (CLASS) == T_REG \
- || (CLASS) == M16_T_REGS || (CLASS) == M16_NA_REGS \
- || (CLASS) == V1_REG \
- || (CLASS) == PIC_FN_ADDR_REG || (CLASS) == LEA_REGS)
-
-/* This macro is also used later on in the file. */
-#define COP_REG_CLASS_P(CLASS) \
- ((CLASS) == COP0_REGS || (CLASS) == COP2_REGS || (CLASS) == COP3_REGS)
-
-/* REG_ALLOC_ORDER is to order in which to allocate registers. This
- is the default value (allocate the registers in numeric order). We
- define it just so that we can override it for the mips16 target in
- ORDER_REGS_FOR_LOCAL_ALLOC. */
+/* We generally want to put call-clobbered registers ahead of
+ call-saved ones. (IRA expects this.) */
#define REG_ALLOC_ORDER \
-{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
+{ /* Accumulator registers. When GPRs and accumulators have equal \
+ cost, we generally prefer to use accumulators. For example, \
+ a division of multiplication result is better allocated to LO, \
+ so that we put the MFLO at the point of use instead of at the \
+ point of definition. It's also needed if we're to take advantage \
+ of the extra accumulators available with -mdspr2. In some cases, \
+ it can also help to reduce register pressure. */ \
+ 64, 65,176,177,178,179,180,181, \
+ /* Call-clobbered GPRs. */ \
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
+ 24, 25, 31, \
+ /* The global pointer. This is call-clobbered for o32 and o64 \
+ abicalls, call-saved for n32 and n64 abicalls, and a program \
+ invariant otherwise. Putting it between the call-clobbered \
+ and call-saved registers should cope with all eventualities. */ \
+ 28, \
+ /* Call-saved GPRs. */ \
+ 16, 17, 18, 19, 20, 21, 22, 23, 30, \
+ /* GPRs that can never be exposed to the register allocator. */ \
+ 0, 26, 27, 29, \
+ /* Call-clobbered FPRs. */ \
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
- 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, \
- 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
+ 48, 49, 50, 51, \
+ /* FPRs that are usually call-saved. The odd ones are actually \
+ call-clobbered for n32, but listing them ahead of the even \
+ registers might encourage the register allocator to fragment \
+ the available FPR pairs. We need paired FPRs to store long \
+ doubles, so it isn't clear that using a different order \
+ for n32 would be a win. */ \
+ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, \
+ /* None of the remaining classes have defined call-saved \
+ registers. */ \
+ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \
96, 97, 98, 99, 100,101,102,103,104,105,106,107,108,109,110,111, \
112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127, \
128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143, \
144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159, \
160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175, \
- 176,177,178,179,180,181,182,183,184,185,186,187 \
+ 182,183,184,185,186,187 \
}
-/* ORDER_REGS_FOR_LOCAL_ALLOC is a macro which permits reg_alloc_order
+/* ADJUST_REG_ALLOC_ORDER is a macro which permits reg_alloc_order
to be rearranged based on a particular function. On the mips16, we
want to allocate $24 (T_REG) before other registers for
instructions for which it is possible. */
-#define ORDER_REGS_FOR_LOCAL_ALLOC mips_order_regs_for_local_alloc ()
+#define ADJUST_REG_ALLOC_ORDER mips_order_regs_for_local_alloc ()
/* True if VALUE is an unsigned 6-bit number. */
#define PREFERRED_RELOAD_CLASS(X,CLASS) \
mips_preferred_reload_class (X, CLASS)
-/* Certain machines have the property that some registers cannot be
- copied to some other registers without using memory. Define this
- macro on those machines to be a C expression that is nonzero if
- objects of mode MODE in registers of CLASS1 can only be copied to
- registers of class CLASS2 by storing a register of CLASS1 into
- memory and loading that memory location into a register of CLASS2.
-
- Do not define this macro if its value would always be zero. */
-#if 0
-#define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
- ((!TARGET_DEBUG_H_MODE \
- && GET_MODE_CLASS (MODE) == MODE_INT \
- && ((CLASS1 == FP_REGS && GR_REG_CLASS_P (CLASS2)) \
- || (GR_REG_CLASS_P (CLASS1) && CLASS2 == FP_REGS))) \
- || (TARGET_FLOAT64 && !TARGET_64BIT && (MODE) == DFmode \
- && ((GR_REG_CLASS_P (CLASS1) && CLASS2 == FP_REGS) \
- || (GR_REG_CLASS_P (CLASS2) && CLASS1 == FP_REGS))))
-#endif
/* The HI and LO registers can only be reloaded via the general
registers. Condition code registers can only be loaded to the
general registers, and from the floating point registers. */
#define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
- mips_secondary_reload_class (CLASS, MODE, X, 1)
+ mips_secondary_reload_class (CLASS, MODE, X, true)
#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
- mips_secondary_reload_class (CLASS, MODE, X, 0)
+ mips_secondary_reload_class (CLASS, MODE, X, false)
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
#define STACK_GROWS_DOWNWARD
-/* The offset of the first local variable from the beginning of the frame.
- See compute_frame_size for details about the frame layout.
+#define FRAME_GROWS_DOWNWARD flag_stack_protect
- ??? If flag_profile_values is true, and we are generating 32-bit code, then
- we assume that we will need 16 bytes of argument space. This is because
- the value profiling code may emit calls to cmpdi2 in leaf functions.
- Without this hack, the local variables will start at sp+8 and the gp save
- area will be at sp+16, and thus they will overlap. compute_frame_size is
- OK because it uses STARTING_FRAME_OFFSET to compute cprestore_size, which
- will end up as 24 instead of 8. This won't be needed if profiling code is
- inserted before virtual register instantiation. */
+/* Size of the area allocated in the frame to save the GP. */
-#define STARTING_FRAME_OFFSET \
- ((flag_profile_values && ! TARGET_64BIT \
- ? MAX (REG_PARM_STACK_SPACE(NULL), current_function_outgoing_args_size) \
- : current_function_outgoing_args_size) \
- + (TARGET_CALL_CLOBBERED_GP ? MIPS_STACK_ALIGN (UNITS_PER_WORD) : 0))
+#define MIPS_GP_SAVE_AREA_SIZE \
+ (TARGET_CALL_CLOBBERED_GP ? MIPS_STACK_ALIGN (UNITS_PER_WORD) : 0)
+
+/* The offset of the first local variable from the frame pointer. See
+ mips_compute_frame_info for details about the frame layout. */
+
+#define STARTING_FRAME_OFFSET \
+ (FRAME_GROWS_DOWNWARD \
+ ? 0 \
+ : crtl->outgoing_args_size + MIPS_GP_SAVE_AREA_SIZE)
#define RETURN_ADDR_RTX mips_return_addr
-/* Since the mips16 ISA mode is encoded in the least-significant bit
- of the address, mask it off return addresses for purposes of
- finding exception handling regions. */
+/* Mask off the MIPS16 ISA bit in unwind addresses.
+
+ The reason for this is a little subtle. When unwinding a call,
+ we are given the call's return address, which on most targets
+ is the address of the following instruction. However, what we
+ actually want to find is the EH region for the call itself.
+ The target-independent unwind code therefore searches for "RA - 1".
+
+ In the MIPS16 case, RA is always an odd-valued (ISA-encoded) address.
+ RA - 1 is therefore the real (even-valued) start of the return
+ instruction. EH region labels are usually odd-valued MIPS16 symbols
+ too, so a search for an even address within a MIPS16 region would
+ usually work.
+
+ However, there is an exception. If the end of an EH region is also
+ the end of a function, the end label is allowed to be even. This is
+ necessary because a following non-MIPS16 function may also need EH
+ information for its first instruction.
+ Thus a MIPS16 region may be terminated by an ISA-encoded or a
+ non-ISA-encoded address. This probably isn't ideal, but it is
+ the traditional (legacy) behavior. It is therefore only safe
+ to search MIPS EH regions for an _odd-valued_ address.
+
+ Masking off the ISA bit means that the target-independent code
+ will search for "(RA & -2) - 1", which is guaranteed to be odd. */
#define MASK_RETURN_ADDR GEN_INT (-2)
{ FRAME_POINTER_REGNUM, GP_REG_FIRST + 30}, \
{ FRAME_POINTER_REGNUM, GP_REG_FIRST + 17}}
-/* We can always eliminate to the hard frame pointer. We can eliminate
- to the stack pointer unless a frame pointer is needed.
-
- In mips16 mode, we need a frame pointer for a large frame; otherwise,
- reload may be unable to compute the address of a local variable,
- since there is no way to add a large constant to the stack pointer
- without using a temporary register. */
-#define CAN_ELIMINATE(FROM, TO) \
- ((TO) == HARD_FRAME_POINTER_REGNUM \
- || ((TO) == STACK_POINTER_REGNUM && !frame_pointer_needed \
- && (!TARGET_MIPS16 \
- || compute_frame_size (get_frame_size ()) < 32768)))
-
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
(OFFSET) = mips_initial_elimination_offset ((FROM), (TO))
allocate the area reserved for arguments passed in registers.
If `ACCUMULATE_OUTGOING_ARGS' is also defined, the only effect
of this macro is to determine whether the space is included in
- `current_function_outgoing_args_size'. */
-#define OUTGOING_REG_PARM_STACK_SPACE 1
+ `crtl->outgoing_args_size'. */
+#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
#define STACK_BOUNDARY (TARGET_NEWABI ? 128 : 64)
\f
#define FP_ARG_LAST (FP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
#define LIBCALL_VALUE(MODE) \
- mips_function_value (NULL_TREE, NULL, (MODE))
+ mips_function_value (NULL_TREE, NULL_TREE, MODE)
#define FUNCTION_VALUE(VALTYPE, FUNC) \
- mips_function_value ((VALTYPE), (FUNC), VOIDmode)
+ mips_function_value (VALTYPE, FUNC, VOIDmode)
/* 1 if N is a possible register number for a function value.
On the MIPS, R2 R3 and F0 F2 are the only register thus used.
allocate floating-point registers.
So for the standard ABIs, the first N words are allocated to integer
- registers, and function_arg decides on an argument-by-argument basis
- whether that argument should really go in an integer register, or in
- a floating-point one. */
+ registers, and mips_function_arg decides on an argument-by-argument
+ basis whether that argument should really go in an integer register,
+ or in a floating-point one. */
typedef struct mips_args {
/* Always true for varargs functions. Otherwise true if at least
For a library call, FNTYPE is 0. */
#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
- init_cumulative_args (&CUM, FNTYPE, LIBNAME) \
+ mips_init_cumulative_args (&CUM, FNTYPE)
/* Update the data in CUM to advance over an argument
of mode MODE and data type TYPE.
(TYPE is null for libcalls where that information may not be available.) */
-#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
- function_arg_advance (&CUM, MODE, TYPE, NAMED)
+#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
+ mips_function_arg_advance (&CUM, MODE, TYPE, NAMED)
/* Determine where to put an argument to a function.
Value is zero to push the argument on the stack,
(otherwise it is an extra parameter matching an ellipsis). */
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
- function_arg( &CUM, MODE, TYPE, NAMED)
+ mips_function_arg (&CUM, MODE, TYPE, NAMED)
-#define FUNCTION_ARG_BOUNDARY function_arg_boundary
+#define FUNCTION_ARG_BOUNDARY mips_function_arg_boundary
-#define FUNCTION_ARG_PADDING(MODE, TYPE) \
+#define FUNCTION_ARG_PADDING(MODE, TYPE) \
(mips_pad_arg_upward (MODE, TYPE) ? upward : downward)
-#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
+#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
(mips_pad_reg_upward (MODE, TYPE) ? upward : downward)
/* True if using EABI and varargs can be passed in floating-point
(mips_abi == ABI_EABI && UNITS_PER_FPVALUE >= UNITS_PER_DOUBLE)
\f
-/* Say that the epilogue uses the return address register. Note that
- in the case of sibcalls, the values "used by the epilogue" are
- considered live at the start of the called function. */
-#define EPILOGUE_USES(REGNO) ((REGNO) == 31)
+#define EPILOGUE_USES(REGNO) mips_epilogue_uses (REGNO)
/* Treat LOC as a byte offset from the stack pointer and round it up
to the next fully-aligned offset. */
(TARGET_NEWABI ? ((LOC) + 15) & -16 : ((LOC) + 7) & -8)
\f
-/* Implement `va_start' for varargs and stdarg. */
-#define EXPAND_BUILTIN_VA_START(valist, nextarg) \
- mips_va_start (valist, nextarg)
-\f
/* Output assembler code to FILE to increment profiler label # LABELNO
for profiling a function entry. */
-#define FUNCTION_PROFILER(FILE, LABELNO) \
-{ \
- if (TARGET_MIPS16) \
- sorry ("mips16 function profiling"); \
- fprintf (FILE, "\t.set\tnoat\n"); \
- fprintf (FILE, "\tmove\t%s,%s\t\t# save current return address\n", \
- reg_names[GP_REG_FIRST + 1], reg_names[GP_REG_FIRST + 31]); \
- if (!TARGET_NEWABI) \
- { \
- fprintf (FILE, \
- "\t%s\t%s,%s,%d\t\t# _mcount pops 2 words from stack\n", \
- TARGET_64BIT ? "dsubu" : "subu", \
- reg_names[STACK_POINTER_REGNUM], \
- reg_names[STACK_POINTER_REGNUM], \
- Pmode == DImode ? 16 : 8); \
- } \
- fprintf (FILE, "\tjal\t_mcount\n"); \
- fprintf (FILE, "\t.set\tat\n"); \
-}
+#define FUNCTION_PROFILER(FILE, LABELNO) mips_function_profiler ((FILE))
+
+/* The profiler preserves all interesting registers, including $31. */
+#define MIPS_SAVE_REG_FOR_PROFILING_P(REGNO) false
/* No mips port has ever used the profiler counter word, so don't emit it
or the label for it. */
#define EXIT_IGNORE_STACK 1
\f
-/* A C statement to output, on the stream FILE, assembler code for a
- block of data that contains the constant parts of a trampoline.
- This code should not include a label--the label is taken care of
- automatically. */
+/* Trampolines are a block of code followed by two pointers. */
-#define TRAMPOLINE_TEMPLATE(STREAM) \
-{ \
- if (ptr_mode == DImode) \
- fprintf (STREAM, "\t.word\t0x03e0082d\t\t# dmove $1,$31\n"); \
- else \
- fprintf (STREAM, "\t.word\t0x03e00821\t\t# move $1,$31\n"); \
- fprintf (STREAM, "\t.word\t0x04110001\t\t# bgezal $0,.+8\n"); \
- fprintf (STREAM, "\t.word\t0x00000000\t\t# nop\n"); \
- if (ptr_mode == DImode) \
- { \
- fprintf (STREAM, "\t.word\t0xdfe30014\t\t# ld $3,20($31)\n"); \
- fprintf (STREAM, "\t.word\t0xdfe2001c\t\t# ld $2,28($31)\n"); \
- fprintf (STREAM, "\t.word\t0x0060c82d\t\t# dmove $25,$3\n"); \
- } \
- else \
- { \
- fprintf (STREAM, "\t.word\t0x8fe30014\t\t# lw $3,20($31)\n"); \
- fprintf (STREAM, "\t.word\t0x8fe20018\t\t# lw $2,24($31)\n"); \
- fprintf (STREAM, "\t.word\t0x0060c821\t\t# move $25,$3\n"); \
- } \
- fprintf (STREAM, "\t.word\t0x00600008\t\t# jr $3\n"); \
- if (ptr_mode == DImode) \
- { \
- fprintf (STREAM, "\t.word\t0x0020f82d\t\t# dmove $31,$1\n"); \
- fprintf (STREAM, "\t.dword\t0x00000000\t\t# <function address>\n"); \
- fprintf (STREAM, "\t.dword\t0x00000000\t\t# <static chain value>\n"); \
- } \
- else \
- { \
- fprintf (STREAM, "\t.word\t0x0020f821\t\t# move $31,$1\n"); \
- fprintf (STREAM, "\t.word\t0x00000000\t\t# <function address>\n"); \
- fprintf (STREAM, "\t.word\t0x00000000\t\t# <static chain value>\n"); \
- } \
-}
-
-/* A C expression for the size in bytes of the trampoline, as an
- integer. */
+#define TRAMPOLINE_SIZE \
+ (mips_trampoline_code_size () + GET_MODE_SIZE (ptr_mode) * 2)
-#define TRAMPOLINE_SIZE (32 + GET_MODE_SIZE (ptr_mode) * 2)
+/* Forcing a 64-bit alignment for 32-bit targets allows us to load two
+ pointers from a single LUI base. */
-/* Alignment required for trampolines, in bits. */
+#define TRAMPOLINE_ALIGNMENT 64
-#define TRAMPOLINE_ALIGNMENT GET_MODE_BITSIZE (ptr_mode)
-
-/* INITIALIZE_TRAMPOLINE calls this library function to flush
+/* mips_trampoline_init calls this library function to flush
program and data caches. */
#ifndef CACHE_FLUSH_FUNC
#define CACHE_FLUSH_FUNC "_flush_cache"
#endif
-/* A C statement to initialize the variable parts of a trampoline.
- ADDR is an RTX for the address of the trampoline; FNADDR is an
- RTX for the address of the nested function; STATIC_CHAIN is an
- RTX for the static chain value that should be passed to the
- function when it is called. */
-
-#define INITIALIZE_TRAMPOLINE(ADDR, FUNC, CHAIN) \
-{ \
- rtx func_addr, chain_addr; \
- \
- func_addr = plus_constant (ADDR, 32); \
- chain_addr = plus_constant (func_addr, GET_MODE_SIZE (ptr_mode)); \
- emit_move_insn (gen_rtx_MEM (ptr_mode, func_addr), FUNC); \
- emit_move_insn (gen_rtx_MEM (ptr_mode, chain_addr), CHAIN); \
- \
- /* Flush both caches. We need to flush the data cache in case \
- the system has a write-back cache. */ \
- /* ??? Should check the return value for errors. */ \
- if (mips_cache_flush_func && mips_cache_flush_func[0]) \
- emit_library_call (gen_rtx_SYMBOL_REF (Pmode, mips_cache_flush_func), \
- 0, VOIDmode, 3, ADDR, Pmode, \
- GEN_INT (TRAMPOLINE_SIZE), TYPE_MODE (integer_type_node),\
- GEN_INT (3), TYPE_MODE (integer_type_node)); \
-}
+#define MIPS_ICACHE_SYNC(ADDR, SIZE) \
+ /* Flush both caches. We need to flush the data cache in case \
+ the system has a write-back cache. */ \
+ emit_library_call (gen_rtx_SYMBOL_REF (Pmode, mips_cache_flush_func), \
+ LCT_NORMAL, VOIDmode, 3, ADDR, Pmode, SIZE, Pmode, \
+ GEN_INT (3), TYPE_MODE (integer_type_node))
+
\f
/* Addressing modes, and classification of registers for them. */
#define MAX_REGS_PER_ADDRESS 1
-#ifdef REG_OK_STRICT
-#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
-{ \
- if (mips_legitimate_address_p (MODE, X, 1)) \
- goto ADDR; \
-}
-#else
-#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
-{ \
- if (mips_legitimate_address_p (MODE, X, 0)) \
- goto ADDR; \
-}
-#endif
-
/* Check for constness inline but use mips_legitimate_address_p
to check whether a constant really is an address. */
#define CONSTANT_ADDRESS_P(X) \
- (CONSTANT_P (X) && mips_legitimate_address_p (SImode, X, 0))
+ (CONSTANT_P (X) && memory_address_p (SImode, X))
#define LEGITIMATE_CONSTANT_P(X) (mips_const_insns (X) > 0)
-#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
- do { \
- if (mips_legitimize_address (&(X), MODE)) \
- goto WIN; \
- } while (0)
-
-
-/* A C statement or compound statement with a conditional `goto
- LABEL;' executed if memory address X (an RTX) can have different
- meanings depending on the machine mode of the memory reference it
- is used for.
-
- Autoincrement and autodecrement addresses typically have
- mode-dependent effects because the amount of the increment or
- decrement is the size of the operand being addressed. Some
- machines have other mode-dependent addresses. Many RISC machines
- have no mode-dependent addresses.
-
- You may assume that ADDR is a valid address for the machine. */
-
-#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) {}
-
/* This handles the magic '..CURRENT_FUNCTION' symbol, which means
'the start of the function that this code is output in'. */
#define SYMBOL_REF_LONG_CALL_P(X) \
((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_LONG_CALL) != 0)
-/* Specify the machine mode that this machine uses
- for the index in the tablejump instruction.
- ??? Using HImode in mips16 mode can cause overflow. */
-#define CASE_VECTOR_MODE \
- (TARGET_MIPS16 ? HImode : ptr_mode)
+/* This flag marks functions that cannot be lazily bound. */
+#define SYMBOL_FLAG_BIND_NOW (SYMBOL_FLAG_MACH_DEP << 1)
+#define SYMBOL_REF_BIND_NOW_P(RTX) \
+ ((SYMBOL_REF_FLAGS (RTX) & SYMBOL_FLAG_BIND_NOW) != 0)
-/* Define as C expression which evaluates to nonzero if the tablejump
- instruction expects the table to contain offsets from the address of the
- table.
- Do not define this if the table should contain absolute addresses. */
-#define CASE_VECTOR_PC_RELATIVE (TARGET_MIPS16)
+/* True if we're generating a form of MIPS16 code in which jump tables
+ are stored in the text section and encoded as 16-bit PC-relative
+ offsets. This is only possible when general text loads are allowed,
+ since the table access itself will be an "lh" instruction. */
+/* ??? 16-bit offsets can overflow in large functions. */
+#define TARGET_MIPS16_SHORT_JUMP_TABLES TARGET_MIPS16_TEXT_LOADS
+
+#define JUMP_TABLES_IN_TEXT_SECTION TARGET_MIPS16_SHORT_JUMP_TABLES
+
+#define CASE_VECTOR_MODE (TARGET_MIPS16_SHORT_JUMP_TABLES ? HImode : ptr_mode)
+
+#define CASE_VECTOR_PC_RELATIVE TARGET_MIPS16_SHORT_JUMP_TABLES
/* Define this as 1 if `char' should by default be signed; else as 0. */
#ifndef DEFAULT_SIGNED_CHAR
#define DEFAULT_SIGNED_CHAR 1
#endif
-/* Max number of bytes we can move from memory to memory
- in one reasonably fast instruction. */
-#define MOVE_MAX (TARGET_64BIT ? 8 : 4)
+/* Although LDC1 and SDC1 provide 64-bit moves on 32-bit targets,
+ we generally don't want to use them for copying arbitrary data.
+ A single N-word move is usually the same cost as N single-word moves. */
+#define MOVE_MAX UNITS_PER_WORD
#define MAX_MOVE_MAX 8
/* Define this macro as a C expression which is nonzero if
difference in cost between byte and (aligned) word loads.
On RISC machines, it tends to generate better code to define
- this as 1, since it avoids making a QI or HI mode register. */
-#define SLOW_BYTE_ACCESS 1
+ this as 1, since it avoids making a QI or HI mode register.
+
+ But, generating word accesses for -mips16 is generally bad as shifts
+ (often extended) would be needed for byte accesses. */
+#define SLOW_BYTE_ACCESS (!TARGET_MIPS16)
/* Define this to be nonzero if shift instructions ignore all but the low-order
few bits. */
#define FUNCTION_MODE SImode
\f
-/* The cost of loading values from the constant pool. It should be
- larger than the cost of any constant we want to synthesize in-line. */
-
-#define CONSTANT_POOL_COST COSTS_N_INSNS (8)
-
/* A C expression for the cost of moving data from a register in
class FROM to one in class TO. The classes are expressed using
the enumeration values such as `GENERAL_REGS'. A value of 2 is
/* A C expression for the cost of a branch instruction. A value of
1 is the default; other values are interpreted relative to that. */
-#define BRANCH_COST mips_cost->branch_cost
+#define BRANCH_COST(speed_p, predictable_p) mips_branch_cost
#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
/* If defined, modifies the length assigned to instruction INSN as a
#define MIPS_BRANCH(OPCODE, OPERANDS) \
"%*" OPCODE "%?\t" OPERANDS "%/"
+/* Return an asm string that forces INSN to be treated as an absolute
+ J or JAL instruction instead of an assembler macro. */
+#define MIPS_ABSOLUTE_JUMP(INSN) \
+ (TARGET_ABICALLS_PIC2 \
+ ? ".option\tpic0\n\t" INSN "\n\t.option\tpic2" \
+ : INSN)
+
/* Return the asm template for a call. INSN is the instruction's mnemonic
- ("j" or "jal"), OPERANDS are its operands, and OPNO is the operand number
- of the target.
+ ("j" or "jal"), OPERANDS are its operands, TARGET_OPNO is the operand
+ number of the target. SIZE_OPNO is the operand number of the argument size
+ operand that can optionally hold the call attributes. If SIZE_OPNO is not
+ -1 and the call is indirect, use the function symbol from the call
+ attributes to attach a R_MIPS_JALR relocation to the call.
When generating GOT code without explicit relocation operators,
all calls should use assembly macros. Otherwise, all indirect
calls should use "jr" or "jalr"; we will arrange to restore $gp
afterwards if necessary. Finally, we can only generate direct
calls for -mabicalls by temporarily switching to non-PIC mode. */
-#define MIPS_CALL(INSN, OPERANDS, OPNO) \
+#define MIPS_CALL(INSN, OPERANDS, TARGET_OPNO, SIZE_OPNO) \
(TARGET_USE_GOT && !TARGET_EXPLICIT_RELOCS \
- ? "%*" INSN "\t%" #OPNO "%/" \
- : REG_P (OPERANDS[OPNO]) \
- ? "%*" INSN "r\t%" #OPNO "%/" \
- : TARGET_ABICALLS \
- ? (".option\tpic0\n\t" \
- "%*" INSN "\t%" #OPNO "%/\n\t" \
- ".option\tpic2") \
- : "%*" INSN "\t%" #OPNO "%/")
+ ? "%*" INSN "\t%" #TARGET_OPNO "%/" \
+ : (REG_P (OPERANDS[TARGET_OPNO]) \
+ && mips_get_pic_call_symbol (OPERANDS, SIZE_OPNO)) \
+ ? ("%*.reloc\t1f,R_MIPS_JALR,%" #SIZE_OPNO "\n" \
+ "1:\t" INSN "r\t%" #TARGET_OPNO "%/") \
+ : REG_P (OPERANDS[TARGET_OPNO]) \
+ ? "%*" INSN "r\t%" #TARGET_OPNO "%/" \
+ : MIPS_ABSOLUTE_JUMP ("%*" INSN "\t%" #TARGET_OPNO "%/"))
\f
/* Control the assembler format that we output. */
"$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", \
"$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31", \
"hi", "lo", "", "$fcc0","$fcc1","$fcc2","$fcc3","$fcc4", \
- "$fcc5","$fcc6","$fcc7","", "", "$arg", "$frame", "$fakec", \
+ "$fcc5","$fcc6","$fcc7","", "$cprestore", "$arg", "$frame", "$fakec", \
"$c0r0", "$c0r1", "$c0r2", "$c0r3", "$c0r4", "$c0r5", "$c0r6", "$c0r7", \
"$c0r8", "$c0r9", "$c0r10","$c0r11","$c0r12","$c0r13","$c0r14","$c0r15", \
"$c0r16","$c0r17","$c0r18","$c0r19","$c0r20","$c0r21","$c0r22","$c0r23", \
#define ALL_COP_ADDITIONAL_REGISTER_NAMES
-/* A C compound statement to output to stdio stream STREAM the
- assembler syntax for an instruction operand X. X is an RTL
- expression.
-
- CODE is a value that can be used to specify one of several ways
- of printing the operand. It is used when identical operands
- must be printed differently depending on the context. CODE
- comes from the `%' specification that was used to request
- printing of the operand. If the specification was just `%DIGIT'
- then CODE is 0; if the specification was `%LTR DIGIT' then CODE
- is the ASCII code for LTR.
-
- If X is a register, this macro should print the register's name.
- The names can be found in an array `reg_names' whose type is
- `char *[]'. `reg_names' is initialized from `REGISTER_NAMES'.
-
- When the machine description has a specification `%PUNCT' (a `%'
- followed by a punctuation character), this macro is called with
- a null pointer for X and the punctuation character for CODE.
-
- See mips.c for the MIPS specific codes. */
-
-#define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
-
-/* A C expression which evaluates to true if CODE is a valid
- punctuation character for use in the `PRINT_OPERAND' macro. If
- `PRINT_OPERAND_PUNCT_VALID_P' is not defined, it means that no
- punctuation characters (except for the standard one, `%') are
- used in this way. */
-
+#define PRINT_OPERAND mips_print_operand
#define PRINT_OPERAND_PUNCT_VALID_P(CODE) mips_print_operand_punct[CODE]
-
-/* A C compound statement to output to stdio stream STREAM the
- assembler syntax for an instruction operand that is a memory
- reference whose address is ADDR. ADDR is an RTL expression. */
-
-#define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
-
-
-/* A C statement, to be executed after all slot-filler instructions
- have been output. If necessary, call `dbr_sequence_length' to
- determine the number of slots filled in a sequence (zero if not
- currently outputting a sequence), to decide how many no-ops to
- output, or whatever.
-
- Don't define this macro if it has nothing to do, but it is
- helpful in reading assembly output if the extent of the delay
- sequence is made explicit (e.g. with white space).
-
- Note that output routines for instructions with delay slots must
- be prepared to deal with not being output as part of a sequence
- (i.e. when the scheduling pass is not run, or when no slot
- fillers could be found.) The variable `final_sequence' is null
- when not processing a sequence, otherwise it contains the
- `sequence' rtx being output. */
+#define PRINT_OPERAND_ADDRESS mips_print_operand_address
#define DBR_OUTPUT_SEQEND(STREAM) \
do \
{ \
- if (set_nomacro > 0 && --set_nomacro == 0) \
- fputs ("\t.set\tmacro\n", STREAM); \
- \
- if (set_noreorder > 0 && --set_noreorder == 0) \
- fputs ("\t.set\treorder\n", STREAM); \
- \
+ /* Undo the effect of '%*'. */ \
+ mips_pop_asm_switch (&mips_nomacro); \
+ mips_pop_asm_switch (&mips_noreorder); \
+ /* Emit a blank line after the delay slot for emphasis. */ \
fputs ("\n", STREAM); \
} \
while (0)
-
/* How to tell the debugger about changes of source files. */
-#define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \
- mips_output_filename (STREAM, NAME)
+#define ASM_OUTPUT_SOURCE_FILENAME mips_output_filename
/* mips-tfile does not understand .stabd directives. */
#define DBX_OUTPUT_SOURCE_LINE(STREAM, LINE, COUNTER) do { \
#undef ASM_DECLARE_OBJECT_NAME
#define ASM_DECLARE_OBJECT_NAME(STREAM, NAME, DECL) \
- mips_declare_object (STREAM, NAME, "", ":\n", 0)
+ mips_declare_object (STREAM, NAME, "", ":\n")
/* Globalizing directive for a label. */
#define GLOBAL_ASM_OP "\t.globl\t"
#undef ASM_DECLARE_FUNCTION_NAME
#define ASM_DECLARE_FUNCTION_NAME(STREAM,NAME,DECL)
-#ifndef FUNCTION_NAME_ALREADY_DECLARED
-#define FUNCTION_NAME_ALREADY_DECLARED 0
-#endif
-
/* This is how to store into the string LABEL
the symbol_ref name of an internal numbered label where
PREFIX is the class of label and NUM is the number within the class.
#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
sprintf ((LABEL), "*%s%s%ld", (LOCAL_LABEL_PREFIX), (PREFIX), (long)(NUM))
+/* Print debug labels as "foo = ." rather than "foo:" because they should
+ represent a byte pointer rather than an ISA-encoded address. This is
+ particularly important for code like:
+
+ $LFBxxx = .
+ .cfi_startproc
+ ...
+ .section .gcc_except_table,...
+ ...
+ .uleb128 foo-$LFBxxx
+
+ The .uleb128 requies $LFBxxx to match the FDE start address, which is
+ likewise a byte pointer rather than an ISA-encoded address.
+
+ At the time of writing, this hook is not used for the function end
+ label:
+
+ $LFExxx:
+ .end foo
+
+ But this doesn't matter, because GAS doesn't treat a pre-.end label
+ as a MIPS16 one anyway. */
+
+#define ASM_OUTPUT_DEBUG_LABEL(FILE, PREFIX, NUM) \
+ fprintf (FILE, "%s%s%d = .\n", LOCAL_LABEL_PREFIX, PREFIX, NUM)
+
/* This is how to output an element of a case-vector that is absolute. */
#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
do { \
- if (TARGET_MIPS16) \
+ if (TARGET_MIPS16_SHORT_JUMP_TABLES) \
fprintf (STREAM, "\t.half\t%sL%d-%sL%d\n", \
LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
else if (TARGET_GPWORD) \
LOCAL_LABEL_PREFIX, VALUE); \
} while (0)
-/* When generating MIPS16 code, we want the jump table to be in the text
- section so that we can load its address using a PC-relative addition. */
-#define JUMP_TABLES_IN_TEXT_SECTION TARGET_MIPS16
-
/* This is how to output an assembler line
that says to advance the location counter
to a multiple of 2**LOG bytes. */
/* This is how to output a string. */
#undef ASM_OUTPUT_ASCII
-#define ASM_OUTPUT_ASCII(STREAM, STRING, LEN) \
- mips_output_ascii (STREAM, STRING, LEN, "\t.ascii\t")
+#define ASM_OUTPUT_ASCII mips_output_ascii
/* Output #ident as a in the read-only data section. */
#undef ASM_OUTPUT_IDENT
#define ASM_OUTPUT_REG_PUSH(STREAM,REGNO) \
do \
{ \
- fprintf (STREAM, "\t%s\t%s,%s,8\n\t%s\t%s,0(%s)\n", \
- TARGET_64BIT ? "dsubu" : "subu", \
+ fprintf (STREAM, "\t%s\t%s,%s,-8\n\t%s\t%s,0(%s)\n", \
+ TARGET_64BIT ? "daddiu" : "addiu", \
reg_names[STACK_POINTER_REGNUM], \
reg_names[STACK_POINTER_REGNUM], \
TARGET_64BIT ? "sd" : "sw", \
#define ASM_OUTPUT_REG_POP(STREAM,REGNO) \
do \
{ \
- if (! set_noreorder) \
- fprintf (STREAM, "\t.set\tnoreorder\n"); \
- \
+ mips_push_asm_switch (&mips_noreorder); \
fprintf (STREAM, "\t%s\t%s,0(%s)\n\t%s\t%s,%s,8\n", \
TARGET_64BIT ? "ld" : "lw", \
reg_names[REGNO], \
TARGET_64BIT ? "daddu" : "addu", \
reg_names[STACK_POINTER_REGNUM], \
reg_names[STACK_POINTER_REGNUM]); \
- \
- if (! set_noreorder) \
- fprintf (STREAM, "\t.set\treorder\n"); \
+ mips_pop_asm_switch (&mips_noreorder); \
} \
while (0)
#undef PTRDIFF_TYPE
#define PTRDIFF_TYPE (POINTER_SIZE == 64 ? "long int" : "int")
+
+/* The maximum number of bytes that can be copied by one iteration of
+ a movmemsi loop; see mips_block_move_loop. */
+#define MIPS_MAX_MOVE_BYTES_PER_LOOP_ITER \
+ (UNITS_PER_WORD * 4)
+
+/* The maximum number of bytes that can be copied by a straight-line
+ implementation of movmemsi; see mips_block_move_straight. We want
+ to make sure that any loop-based implementation will iterate at
+ least twice. */
+#define MIPS_MAX_MOVE_BYTES_STRAIGHT \
+ (MIPS_MAX_MOVE_BYTES_PER_LOOP_ITER * 2)
+
+/* The base cost of a memcpy call, for MOVE_RATIO and friends. These
+ values were determined experimentally by benchmarking with CSiBE.
+ In theory, the call overhead is higher for TARGET_ABICALLS (especially
+ for o32 where we have to restore $gp afterwards as well as make an
+ indirect call), but in practice, bumping this up higher for
+ TARGET_ABICALLS doesn't make much difference to code size. */
+
+#define MIPS_CALL_RATIO 8
+
+/* Any loop-based implementation of movmemsi will have at least
+ MIPS_MAX_MOVE_BYTES_STRAIGHT / UNITS_PER_WORD memory-to-memory
+ moves, so allow individual copies of fewer elements.
+
+ When movmemsi is not available, use a value approximating
+ the length of a memcpy call sequence, so that move_by_pieces
+ will generate inline code if it is shorter than a function call.
+ Since move_by_pieces_ninsns counts memory-to-memory moves, but
+ we'll have to generate a load/store pair for each, halve the
+ value of MIPS_CALL_RATIO to take that into account. */
+
+#define MOVE_RATIO(speed) \
+ (HAVE_movmemsi \
+ ? MIPS_MAX_MOVE_BYTES_STRAIGHT / MOVE_MAX \
+ : MIPS_CALL_RATIO / 2)
+
+/* movmemsi is meant to generate code that is at least as good as
+ move_by_pieces. However, movmemsi effectively uses a by-pieces
+ implementation both for moves smaller than a word and for word-aligned
+ moves of no more than MIPS_MAX_MOVE_BYTES_STRAIGHT bytes. We should
+ allow the tree-level optimisers to do such moves by pieces, as it
+ often exposes other optimization opportunities. We might as well
+ continue to use movmemsi at the rtl level though, as it produces
+ better code when scheduling is disabled (such as at -O). */
+
+#define MOVE_BY_PIECES_P(SIZE, ALIGN) \
+ (HAVE_movmemsi \
+ ? (!currently_expanding_to_rtl \
+ && ((ALIGN) < BITS_PER_WORD \
+ ? (SIZE) < UNITS_PER_WORD \
+ : (SIZE) <= MIPS_MAX_MOVE_BYTES_STRAIGHT)) \
+ : (move_by_pieces_ninsns (SIZE, ALIGN, MOVE_MAX_PIECES + 1) \
+ < (unsigned int) MOVE_RATIO (false)))
+
+/* For CLEAR_RATIO, when optimizing for size, give a better estimate
+ of the length of a memset call, but use the default otherwise. */
+
+#define CLEAR_RATIO(speed)\
+ ((speed) ? 15 : MIPS_CALL_RATIO)
+
+/* This is similar to CLEAR_RATIO, but for a non-zero constant, so when
+ optimizing for size adjust the ratio to account for the overhead of
+ loading the constant and replicating it across the word. */
+
+#define SET_RATIO(speed) \
+ ((speed) ? 15 : MIPS_CALL_RATIO - 2)
+
+/* STORE_BY_PIECES_P can be used when copying a constant string, but
+ in that case each word takes 3 insns (lui, ori, sw), or more in
+ 64-bit mode, instead of 2 (lw, sw). For now we always fail this
+ and let the move_by_pieces code copy the string from read-only
+ memory. In the future, this could be tuned further for multi-issue
+ CPUs that can issue stores down one pipe and arithmetic instructions
+ down another; in that case, the lui/ori/sw combination would be a
+ win for long enough strings. */
+
+#define STORE_BY_PIECES_P(SIZE, ALIGN) 0
\f
#ifndef __mips16
/* Since the bits of the _init and _fini function is spread across
#ifndef HAVE_AS_TLS
#define HAVE_AS_TLS 0
#endif
+
+#ifndef USED_FOR_TARGET
+/* Information about ".set noFOO; ...; .set FOO" blocks. */
+struct mips_asm_switch {
+ /* The FOO in the description above. */
+ const char *name;
+
+ /* The current block nesting level, or 0 if we aren't in a block. */
+ int nesting_level;
+};
+
+extern const enum reg_class mips_regno_to_class[];
+extern bool mips_hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER];
+extern bool mips_print_operand_punct[256];
+extern const char *current_function_file; /* filename current function is in */
+extern int num_source_filenames; /* current .file # */
+extern struct mips_asm_switch mips_noreorder;
+extern struct mips_asm_switch mips_nomacro;
+extern struct mips_asm_switch mips_noat;
+extern int mips_dbx_regno[];
+extern int mips_dwarf_regno[];
+extern bool mips_split_p[];
+extern bool mips_split_hi_p[];
+extern enum processor_type mips_arch; /* which cpu to codegen for */
+extern enum processor_type mips_tune; /* which cpu to schedule for */
+extern int mips_isa; /* architectural level */
+extern int mips_abi; /* which ABI to use */
+extern const struct mips_cpu_info *mips_arch_info;
+extern const struct mips_cpu_info *mips_tune_info;
+extern const struct mips_rtx_cost_data *mips_cost;
+extern bool mips_base_mips16;
+extern enum mips_code_readable_setting mips_code_readable;
+#endif
+
+/* Enable querying of DFA units. */
+#define CPU_UNITS_QUERY 1
+
+#define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
+ mips_final_prescan_insn (INSN, OPVEC, NOPERANDS)
+
+/* This is necessary to avoid a warning about comparing different enum
+ types. */
+#define mips_tune_attr ((enum attr_cpu) mips_tune)
+
+/* As on most targets, we want the .eh_frame section to be read-only where
+ possible. And as on most targets, this means two things:
+
+ (a) Non-locally-binding pointers must have an indirect encoding,
+ so that the addresses in the .eh_frame section itself become
+ locally-binding.
+
+ (b) A shared library's .eh_frame section must encode locally-binding
+ pointers in a relative (relocation-free) form.
+
+ However, MIPS has traditionally not allowed directives like:
+
+ .long x-.
+
+ in cases where "x" is in a different section, or is not defined in the
+ same assembly file. We are therefore unable to emit the PC-relative
+ form required by (b) at assembly time.
+
+ Fortunately, the linker is able to convert absolute addresses into
+ PC-relative addresses on our behalf. Unfortunately, only certain
+ versions of the linker know how to do this for indirect pointers,
+ and for personality data. We must fall back on using writable
+ .eh_frame sections for shared libraries if the linker does not
+ support this feature. */
+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
+ (((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_absptr)
OSDN Git Service
