/* Definitions of target machine for GNU compiler,
for ATMEL AVR at90s8515, ATmega103/103L, ATmega603/603L microcontrollers.
- Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
Contributed by Denis Chertykov (denisc@overta.ru)
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
+GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
-GNU CC is distributed in the hope that it will be useful,
+GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* Names to predefine in the preprocessor for this target machine. */
-
-#define CPP_PREDEFINES "-DAVR"
-/* Define this to be a string constant containing `-D' options to
- define the predefined macros that identify this machine and system.
- These macros will be predefined unless the `-ansi' option is
- specified.
-
- In addition, a parallel set of macros are predefined, whose names
- are made by appending `__' at the beginning and at the end. These
- `__' macros are permitted by the ANSI standard, so they are
- predefined regardless of whether `-ansi' is specified.
-
- For example, on the Sun, one can use the following value:
-
- "-Dmc68000 -Dsun -Dunix"
-
- The result is to define the macros `__mc68000__', `__sun__' and
- `__unix__' unconditionally, and the macros `mc68000', `sun' and
- `unix' provided `-ansi' is not specified. */
-
-
-/* This declaration should be present. */
-extern int target_flags;
-
-#define MASK_RTL_DUMP 0x00000010
-#define MASK_ALL_DEBUG 0x00000FE0
-#define MASK_ORDER_1 0x00001000
-#define MASK_INSN_SIZE_DUMP 0x00002000
-#define MASK_ORDER_2 0x00004000
-#define MASK_NO_TABLEJUMP 0x00008000
-#define MASK_INT8 0x00010000
-#define MASK_NO_INTERRUPTS 0x00020000
-#define MASK_CALL_PROLOGUES 0x00040000
-#define MASK_TINY_STACK 0x00080000
-
-#define TARGET_ORDER_1 (target_flags & MASK_ORDER_1)
-#define TARGET_ORDER_2 (target_flags & MASK_ORDER_2)
-#define TARGET_INT8 (target_flags & MASK_INT8)
-#define TARGET_NO_INTERRUPTS (target_flags & MASK_NO_INTERRUPTS)
-#define TARGET_INSN_SIZE_DUMP (target_flags & MASK_INSN_SIZE_DUMP)
-#define TARGET_CALL_PROLOGUES (target_flags & MASK_CALL_PROLOGUES)
-#define TARGET_TINY_STACK (target_flags & MASK_TINY_STACK)
-#define TARGET_NO_TABLEJUMP (target_flags & MASK_NO_TABLEJUMP)
-
-/* Dump each assembler insn's rtl into the output file.
- This is for debugging the compiler itself. */
-
-#define TARGET_RTL_DUMP (target_flags & MASK_RTL_DUMP)
-#define TARGET_ALL_DEBUG (target_flags & MASK_ALL_DEBUG)
-
-/* `TARGET_...'
- This series of macros is to allow compiler command arguments to
- enable or disable the use of optional features of the target
- machine. For example, one machine description serves both the
- 68000 and the 68020; a command argument tells the compiler whether
- it should use 68020-only instructions or not. This command
- argument works by means of a macro `TARGET_68020' that tests a bit
- in `target_flags'.
-
- Define a macro `TARGET_FEATURENAME' for each such option. Its
- definition should test a bit in `target_flags'; for example:
-
- #define TARGET_68020 (target_flags & 1)
-
- One place where these macros are used is in the
- condition-expressions of instruction patterns. Note how
- `TARGET_68020' appears frequently in the 68000 machine description
- file, `m68k.md'. Another place they are used is in the
- definitions of the other macros in the `MACHINE.h' file. */
-
-
-
-#define TARGET_SWITCHES { \
- { "order1", MASK_ORDER_1, NULL }, \
- { "order2", MASK_ORDER_2, NULL }, \
- { "int8", MASK_INT8, N_("Assume int to be 8 bit integer") }, \
- { "no-interrupts", MASK_NO_INTERRUPTS, \
- N_("Change the stack pointer without disabling interrupts") }, \
- { "call-prologues", MASK_CALL_PROLOGUES, \
- N_("Use subroutines for function prologue/epilogue") }, \
- { "tiny-stack", MASK_TINY_STACK, \
- N_("Change only the low 8 bits of the stack pointer") }, \
- { "no-tablejump", MASK_NO_TABLEJUMP, \
- N_("Do not generate tablejump insns") }, \
- { "rtl", MASK_RTL_DUMP, NULL }, \
- { "size", MASK_INSN_SIZE_DUMP, \
- N_("Output instruction sizes to the asm file") }, \
- { "deb", MASK_ALL_DEBUG, NULL }, \
- { "", 0, NULL } }
-/* This macro defines names of command options to set and clear bits
- in `target_flags'. Its definition is an initializer with a
- subgrouping for each command option.
-
- Each subgrouping contains a string constant, that defines the
- option name, and a number, which contains the bits to set in
- `target_flags'. A negative number says to clear bits instead; the
- negative of the number is which bits to clear. The actual option
- name is made by appending `-m' to the specified name.
-
- One of the subgroupings should have a null string. The number in
- this grouping is the default value for `target_flags'. Any target
- options act starting with that value.
-
- Here is an example which defines `-m68000' and `-m68020' with
- opposite meanings, and picks the latter as the default:
-
- #define TARGET_SWITCHES \
- { { "68020", 1}, \
- { "68000", -1}, \
- { "", 1}} */
-
-extern const char *avr_init_stack;
-extern const char *avr_mcu_name;
+along with GCC; see the file COPYING. If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
+
+/* Names to predefine in the preprocessor for this target machine. */
+
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define_std ("AVR"); \
+ if (avr_base_arch_macro) \
+ builtin_define (avr_base_arch_macro); \
+ if (avr_extra_arch_macro) \
+ builtin_define (avr_extra_arch_macro); \
+ if (avr_asm_only_p) \
+ builtin_define ("__AVR_ASM_ONLY__"); \
+ if (avr_enhanced_p) \
+ builtin_define ("__AVR_ENHANCED__"); \
+ if (avr_mega_p) \
+ builtin_define ("__AVR_MEGA__"); \
+ if (TARGET_NO_INTERRUPTS) \
+ builtin_define ("__NO_INTERRUPTS__"); \
+ } \
+ while (0)
+
+extern const char *avr_base_arch_macro;
+extern const char *avr_extra_arch_macro;
extern int avr_mega_p;
extern int avr_enhanced_p;
+extern int avr_asm_only_p;
+#ifndef IN_LIBGCC2
+extern GTY(()) section *progmem_section;
+#endif
-#define AVR_MEGA (avr_mega_p)
+#define AVR_MEGA (avr_mega_p && !TARGET_SHORT_CALLS)
#define AVR_ENHANCED (avr_enhanced_p)
-#define TARGET_OPTIONS { \
- { "init-stack=", &avr_init_stack, N_("Specify the initial stack address") }, \
- { "mcu=", &avr_mcu_name, N_("Specify the MCU name") } }
-/* This macro is similar to `TARGET_SWITCHES' but defines names of
- command options that have values. Its definition is an
- initializer with a subgrouping for each command option.
-
- Each subgrouping contains a string constant, that defines the
- fixed part of the option name, and the address of a variable. The
- variable, type `char *', is set to the variable part of the given
- option if the fixed part matches. The actual option name is made
- by appending `-m' to the specified name.
-
- Here is an example which defines `-mshort-data-NUMBER'. If the
- given option is `-mshort-data-512', the variable `m88k_short_data'
- will be set to the string `"512"'.
-
- extern char *m88k_short_data;
- #define TARGET_OPTIONS \
- { { "short-data-", &m88k_short_data } } */
-
#define TARGET_VERSION fprintf (stderr, " (GNU assembler syntax)");
-/* This macro is a C statement to print on `stderr' a string
- describing the particular machine description choice. Every
- machine description should define `TARGET_VERSION'. For example:
-
- #ifdef MOTOROLA
- #define TARGET_VERSION \
- fprintf (stderr, " (68k, Motorola syntax)");
- #else
- #define TARGET_VERSION \
- fprintf (stderr, " (68k, MIT syntax)");
- #endif */
-
-#define OVERRIDE_OPTIONS avr_override_options()
-/* `OVERRIDE_OPTIONS'
- Sometimes certain combinations of command options do not make
- sense on a particular target machine. You can define a macro
- `OVERRIDE_OPTIONS' to take account of this. This macro, if
- defined, is executed once just after all the command options have
- been parsed.
-
- Don't use this macro to turn on various extra optimizations for
- `-O'. That is what `OPTIMIZATION_OPTIONS' is for. */
+
+#define OVERRIDE_OPTIONS avr_override_options ()
#define CAN_DEBUG_WITHOUT_FP
-/* Define this macro if debugging can be performed even without a
- frame pointer. If this macro is defined, GNU CC will turn on the
- `-fomit-frame-pointer' option whenever `-O' is specified. */
-/* Define this if most significant byte of a word is the lowest numbered. */
#define BITS_BIG_ENDIAN 0
-
-/* Define this if most significant byte of a word is the lowest numbered. */
#define BYTES_BIG_ENDIAN 0
-
-/* Define this if most significant word of a multiword number is the lowest
- numbered. */
#define WORDS_BIG_ENDIAN 0
-/* number of bits in an addressable storage unit */
-#define BITS_PER_UNIT 8
-
-/* Width in bits of a "word", which is the contents of a machine register.
- Note that this is not necessarily the width of data type `int'; */
-#define BITS_PER_WORD 8
-
#ifdef IN_LIBGCC2
/* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits). */
#define UNITS_PER_WORD 4
#else
-/* Width of a word, in units (bytes). */
+/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD 1
#endif
-/* Width in bits of a pointer.
- See also the macro `Pmode' defined below. */
#define POINTER_SIZE 16
DImode or Dfmode ... */
#define MAX_FIXED_MODE_SIZE 32
-/* Allocation boundary (in *bits*) for storing arguments in argument list. */
#define PARM_BOUNDARY 8
-/* Allocation boundary (in *bits*) for the code of a function. */
#define FUNCTION_BOUNDARY 8
-/* Alignment of field after `int : 0' in a structure. */
#define EMPTY_FIELD_BOUNDARY 8
-/* No data type wants to be aligned rounder than this. */
+/* No data type wants to be aligned rounder than this. */
#define BIGGEST_ALIGNMENT 8
-/* Define this if move instructions will actually fail to work
- when given unaligned data. */
#define STRICT_ALIGNMENT 0
-/* A C expression for the size in bits of the type `int' on the
- target machine. If you don't define this, the default is one word. */
#define INT_TYPE_SIZE (TARGET_INT8 ? 8 : 16)
-
-
-/* A C expression for the size in bits of the type `short' on the
- target machine. If you don't define this, the default is half a
- word. (If this would be less than one storage unit, it is rounded
- up to one unit.) */
#define SHORT_TYPE_SIZE (INT_TYPE_SIZE == 8 ? INT_TYPE_SIZE : 16)
-
-/* A C expression for the size in bits of the type `long' on the
- target machine. If you don't define this, the default is one word. */
#define LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 16 : 32)
-
-#define MAX_LONG_TYPE_SIZE 32
-/* Maximum number for the size in bits of the type `long' on the
- target machine. If this is undefined, the default is
- `LONG_TYPE_SIZE'. Otherwise, it is the constant value that is the
- largest value that `LONG_TYPE_SIZE' can have at run-time. This is
- used in `cpp'. */
-
-
-#define LONG_LONG_TYPE_SIZE 64
-/* A C expression for the size in bits of the type `long long' on the
- target machine. If you don't define this, the default is two
- words. If you want to support GNU Ada on your machine, the value
- of macro must be at least 64. */
-
-
-#define CHAR_TYPE_SIZE 8
-/* A C expression for the size in bits of the type `char' on the
- target machine. If you don't define this, the default is one
- quarter of a word. (If this would be less than one storage unit,
- it is rounded up to one unit.) */
-
+#define LONG_LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 32 : 64)
#define FLOAT_TYPE_SIZE 32
-/* A C expression for the size in bits of the type `float' on the
- target machine. If you don't define this, the default is one word. */
-
#define DOUBLE_TYPE_SIZE 32
-/* A C expression for the size in bits of the type `double' on the
- target machine. If you don't define this, the default is two
- words. */
-
-
#define LONG_DOUBLE_TYPE_SIZE 32
-/* A C expression for the size in bits of the type `long double' on
- the target machine. If you don't define this, the default is two
- words. */
#define DEFAULT_SIGNED_CHAR 1
-/* An expression whose value is 1 or 0, according to whether the type
- `char' should be signed or unsigned by default. The user can
- always override this default with the options `-fsigned-char' and
- `-funsigned-char'. */
-
-/* `DEFAULT_SHORT_ENUMS'
- A C expression to determine whether to give an `enum' type only as
- many bytes as it takes to represent the range of possible values
- of that type. A nonzero value means to do that; a zero value
- means all `enum' types should be allocated like `int'.
-
- If you don't define the macro, the default is 0. */
#define SIZE_TYPE (INT_TYPE_SIZE == 8 ? "long unsigned int" : "unsigned int")
-/* A C expression for a string describing the name of the data type
- to use for size values. The typedef name `size_t' is defined
- using the contents of the string.
-
- The string can contain more than one keyword. If so, separate
- them with spaces, and write first any length keyword, then
- `unsigned' if appropriate, and finally `int'. The string must
- exactly match one of the data type names defined in the function
- `init_decl_processing' in the file `c-decl.c'. You may not omit
- `int' or change the order--that would cause the compiler to crash
- on startup.
-
- If you don't define this macro, the default is `"long unsigned
- int"'. */
-
#define PTRDIFF_TYPE (INT_TYPE_SIZE == 8 ? "long int" :"int")
-/* A C expression for a string describing the name of the data type
- to use for the result of subtracting two pointers. The typedef
- name `ptrdiff_t' is defined using the contents of the string. See
- `SIZE_TYPE' above for more information.
-
- If you don't define this macro, the default is `"long int"'. */
-
#define WCHAR_TYPE_SIZE 16
-/* A C expression for the size in bits of the data type for wide
- characters. This is used in `cpp', which cannot make use of
- `WCHAR_TYPE'. */
#define FIRST_PSEUDO_REGISTER 36
-/* Number of hardware registers known to the compiler. They receive
- numbers 0 through `FIRST_PSEUDO_REGISTER-1'; thus, the first
- pseudo register's number really is assigned the number
- `FIRST_PSEUDO_REGISTER'. */
#define FIXED_REGISTERS {\
1,1,/* r0 r1 */\
0,0,/* r30 r31 */\
1,1,/* STACK */\
1,1 /* arg pointer */ }
-/* An initializer that says which registers are used for fixed
- purposes all throughout the compiled code and are therefore not
- available for general allocation. These would include the stack
- pointer, the frame pointer (except on machines where that can be
- used as a general register when no frame pointer is needed), the
- program counter on machines where that is considered one of the
- addressable registers, and any other numbered register with a
- standard use.
-
- This information is expressed as a sequence of numbers, separated
- by commas and surrounded by braces. The Nth number is 1 if
- register N is fixed, 0 otherwise.
-
- The table initialized from this macro, and the table initialized by
- the following one, may be overridden at run time either
- automatically, by the actions of the macro
- `CONDITIONAL_REGISTER_USAGE', or by the user with the command
- options `-ffixed-REG', `-fcall-used-REG' and `-fcall-saved-REG'. */
#define CALL_USED_REGISTERS { \
1,1,/* r0 r1 */ \
1,1,/* r30 r31 */ \
1,1,/* STACK */ \
1,1 /* arg pointer */ }
-/* Like `FIXED_REGISTERS' but has 1 for each register that is
- clobbered (in general) by function calls as well as for fixed
- registers. This macro therefore identifies the registers that are
- not available for general allocation of values that must live
- across function calls.
-
- If a register has 0 in `CALL_USED_REGISTERS', the compiler
- automatically saves it on function entry and restores it on
- function exit, if the register is used within the function. */
-
-#define NON_SAVING_SETJMP 0
-/* If this macro is defined and has a nonzero value, it means that
- `setjmp' and related functions fail to save the registers, or that
- `longjmp' fails to restore them. To compensate, the compiler
- avoids putting variables in registers in functions that use
- `setjmp'. */
#define REG_ALLOC_ORDER { \
24,25, \
0,1, \
32,33,34,35 \
}
-/* If defined, an initializer for a vector of integers, containing the
- numbers of hard registers in the order in which GNU CC should
- prefer to use them (from most preferred to least).
-
- If this macro is not defined, registers are used lowest numbered
- first (all else being equal).
-
- One use of this macro is on machines where the highest numbered
- registers must always be saved and the save-multiple-registers
- instruction supports only sequences of consetionve registers. On
- such machines, define `REG_ALLOC_ORDER' to be an initializer that
- lists the highest numbered allocatable register first. */
#define ORDER_REGS_FOR_LOCAL_ALLOC order_regs_for_local_alloc ()
-/* ORDER_REGS_FOR_LOCAL_ALLOC'
- A C statement (sans semicolon) to choose the order in which to
- allocate hard registers for pseudo-registers local to a basic
- block.
-
- Store the desired register order in the array `reg_alloc_order'.
- Element 0 should be the register to allocate first; element 1, the
- next register; and so on.
-
- The macro body should not assume anything about the contents of
- `reg_alloc_order' before execution of the macro.
-
- On most machines, it is not necessary to define this macro. */
#define HARD_REGNO_NREGS(REGNO, MODE) ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-/* A C expression for the number of consecutive hard registers,
- starting at register number REGNO, required to hold a value of mode
- MODE.
-
- On a machine where all registers are exactly one word, a suitable
- definition of this macro is
-
- #define HARD_REGNO_NREGS(REGNO, MODE) \
- ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \
- / UNITS_PER_WORD)) */
-
#define HARD_REGNO_MODE_OK(REGNO, MODE) avr_hard_regno_mode_ok(REGNO, MODE)
-/* A C expression that is nonzero if it is permissible to store a
- value of mode MODE in hard register number REGNO (or in several
- registers starting with that one). For a machine where all
- registers are equivalent, a suitable definition is
-
- #define HARD_REGNO_MODE_OK(REGNO, MODE) 1
-
- It is not necessary for this macro to check for the numbers of
- fixed registers, because the allocation mechanism considers them
- to be always occupied.
-
- On some machines, double-precision values must be kept in even/odd
- register pairs. The way to implement that is to define this macro
- to reject odd register numbers for such modes.
-
- The minimum requirement for a mode to be OK in a register is that
- the `movMODE' instruction pattern support moves between the
- register and any other hard register for which the mode is OK; and
- that moving a value into the register and back out not alter it.
-
- Since the same instruction used to move `SImode' will work for all
- narrower integer modes, it is not necessary on any machine for
- `HARD_REGNO_MODE_OK' to distinguish between these modes, provided
- you define patterns `movhi', etc., to take advantage of this. This
- is useful because of the interaction between `HARD_REGNO_MODE_OK'
- and `MODES_TIEABLE_P'; it is very desirable for all integer modes
- to be tieable.
-
- Many machines have special registers for floating point arithmetic.
- Often people assume that floating point machine modes are allowed
- only in floating point registers. This is not true. Any
- registers that can hold integers can safely *hold* a floating
- point machine mode, whether or not floating arithmetic can be done
- on it in those registers. Integer move instructions can be used
- to move the values.
-
- On some machines, though, the converse is true: fixed-point machine
- modes may not go in floating registers. This is true if the
- floating registers normalize any value stored in them, because
- storing a non-floating value there would garble it. In this case,
- `HARD_REGNO_MODE_OK' should reject fixed-point machine modes in
- floating registers. But if the floating registers do not
- automatically normalize, if you can store any bit pattern in one
- and retrieve it unchanged without a trap, then any machine mode
- may go in a floating register, so you can define this macro to say
- so.
-
- The primary significance of special floating registers is rather
- that they are the registers acceptable in floating point arithmetic
- instructions. However, this is of no concern to
- `HARD_REGNO_MODE_OK'. You handle it by writing the proper
- constraints for those instructions.
-
- On some machines, the floating registers are especially slow to
- access, so that it is better to store a value in a stack frame
- than in such a register if floating point arithmetic is not being
- done. As long as the floating registers are not in class
- `GENERAL_REGS', they will not be used unless some pattern's
- constraint asks for one. */
-
-#define MODES_TIEABLE_P(MODE1, MODE2) 0
-/* A C expression that is nonzero if it is desirable to choose
- register allocation so as to avoid move instructions between a
- value of mode MODE1 and a value of mode MODE2.
-
- If `HARD_REGNO_MODE_OK (R, MODE1)' and `HARD_REGNO_MODE_OK (R,
- MODE2)' are ever different for any R, then `MODES_TIEABLE_P (MODE1,
- MODE2)' must be zero. */
+
+#define MODES_TIEABLE_P(MODE1, MODE2) 1
enum reg_class {
NO_REGS,
GENERAL_REGS, /* r0 - r31 */
ALL_REGS, LIM_REG_CLASSES
};
-/* An enumeral type that must be defined with all the register class
- names as enumeral values. `NO_REGS' must be first. `ALL_REGS'
- must be the last register class, followed by one more enumeral
- value, `LIM_REG_CLASSES', which is not a register class but rather
- tells how many classes there are.
-
- Each register class has a number, which is the value of casting
- the class name to type `int'. The number serves as an index in
- many of the tables described below. */
#define N_REG_CLASSES (int)LIM_REG_CLASSES
-/* The number of distinct register classes, defined as follows:
-
- #define N_REG_CLASSES (int) LIM_REG_CLASSES */
#define REG_CLASS_NAMES { \
"NO_REGS", \
"NO_LD_REGS", /* r0 - r15 */ \
"GENERAL_REGS", /* r0 - r31 */ \
"ALL_REGS" }
-/* An initializer containing the names of the register classes as C
- string constants. These names are used in writing some of the
- debugging dumps. */
-
-#define REG_X 26
-#define REG_Y 28
-#define REG_Z 30
-#define REG_W 24
#define REG_CLASS_CONTENTS { \
{0x00000000,0x00000000}, /* NO_REGS */ \
0x00000000}, /* POINTER_REGS, r26 - r31 */ \
{(3 << REG_X) | (3 << REG_Y) | (3 << REG_Z) | (3 << REG_W), \
0x00000000}, /* ADDW_REGS, r24 - r31 */ \
- {0x00ff0000,0x00000000}, /* SIMPLE_LD_REGS r16 - r23 */ \
+ {0x00ff0000,0x00000000}, /* SIMPLE_LD_REGS r16 - r23 */ \
{(3 << REG_X)|(3 << REG_Y)|(3 << REG_Z)|(3 << REG_W)|(0xff << 16), \
0x00000000}, /* LD_REGS, r16 - r31 */ \
- {0x0000ffff,0x00000000}, /* NO_LD_REGS r0 - r15 */ \
+ {0x0000ffff,0x00000000}, /* NO_LD_REGS r0 - r15 */ \
{0xffffffff,0x00000000}, /* GENERAL_REGS, r0 - r31 */ \
{0xffffffff,0x00000003} /* ALL_REGS */ \
}
-/* An initializer containing the contents of the register classes, as
- integers which are bit masks. The Nth integer specifies the
- contents of class N. The way the integer MASK is interpreted is
- that register R is in the class if `MASK & (1 << R)' is 1.
-
- When the machine has more than 32 registers, an integer does not
- suffice. Then the integers are replaced by sub-initializers,
- braced groupings containing several integers. Each
- sub-initializer must be suitable as an initializer for the type
- `HARD_REG_SET' which is defined in `hard-reg-set.h'. */
#define REGNO_REG_CLASS(R) avr_regno_reg_class(R)
-/* A C expression whose value is a register class containing hard
- register REGNO. In general there is more than one such class;
- choose a class which is "minimal", meaning that no smaller class
- also contains the register. */
-#define BASE_REG_CLASS POINTER_REGS
-/* A macro whose definition is the name of the class to which a valid
- base register must belong. A base register is one used in an
- address which is the register value plus a displacement. */
+#define BASE_REG_CLASS (reload_completed ? BASE_POINTER_REGS : POINTER_REGS)
#define INDEX_REG_CLASS NO_REGS
-/* A macro whose definition is the name of the class to which a valid
- index register must belong. An index register is one used in an
- address where its value is either multiplied by a scale factor or
- added to another register (as well as added to a displacement). */
-
-#define REG_CLASS_FROM_LETTER(C) avr_reg_class_from_letter(C)
-/* A C expression which defines the machine-dependent operand
- constraint letters for register classes. If CHAR is such a
- letter, the value should be the register class corresponding to
- it. Otherwise, the value should be `NO_REGS'. The register
- letter `r', corresponding to class `GENERAL_REGS', will not be
- passed to this macro; you do not need to handle it. */
#define REGNO_OK_FOR_BASE_P(r) (((r) < FIRST_PSEUDO_REGISTER \
&& ((r) == REG_X \
|| reg_renumber[r] == REG_Z \
|| (reg_renumber[r] \
== ARG_POINTER_REGNUM))))
-/* A C expression which is nonzero if register number NUM is suitable
- for use as a base register in operand addresses. It may be either
- a suitable hard register or a pseudo register that has been
- allocated such a hard register. */
-
-/* #define REGNO_MODE_OK_FOR_BASE_P(r, m) regno_mode_ok_for_base_p(r, m)
- A C expression that is just like `REGNO_OK_FOR_BASE_P', except that
- that expression may examine the mode of the memory reference in
- MODE. You should define this macro if the mode of the memory
- reference affects whether a register may be used as a base
- register. If you define this macro, the compiler will use it
- instead of `REGNO_OK_FOR_BASE_P'. */
#define REGNO_OK_FOR_INDEX_P(NUM) 0
-/* A C expression which is nonzero if register number NUM is suitable
- for use as an index register in operand addresses. It may be
- either a suitable hard register or a pseudo register that has been
- allocated such a hard register.
-
- The difference between an index register and a base register is
- that the index register may be scaled. If an address involves the
- sum of two registers, neither one of them scaled, then either one
- may be labeled the "base" and the other the "index"; but whichever
- labeling is used must fit the machine's constraints of which
- registers may serve in each capacity. The compiler will try both
- labelings, looking for one that is valid, and will reload one or
- both registers only if neither labeling works. */
#define PREFERRED_RELOAD_CLASS(X, CLASS) preferred_reload_class(X,CLASS)
-/* A C expression that places additional restrictions on the register
- class to use when it is necessary to copy value X into a register
- in class CLASS. The value is a register class; perhaps CLASS, or
- perhaps another, smaller class. On many machines, the following
- definition is safe:
-
- #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS
-
- Sometimes returning a more restrictive class makes better code.
- For example, on the 68000, when X is an integer constant that is
- in range for a `moveq' instruction, the value of this macro is
- always `DATA_REGS' as long as CLASS includes the data registers.
- Requiring a data register guarantees that a `moveq' will be used.
-
- If X is a `const_double', by returning `NO_REGS' you can force X
- into a memory constant. This is useful on certain machines where
- immediate floating values cannot be loaded into certain kinds of
- registers. */
-/* `PREFERRED_OUTPUT_RELOAD_CLASS (X, CLASS)'
- Like `PREFERRED_RELOAD_CLASS', but for output reloads instead of
- input reloads. If you don't define this macro, the default is to
- use CLASS, unchanged. */
-
-/* `LIMIT_RELOAD_CLASS (MODE, CLASS)'
- A C expression that places additional restrictions on the register
- class to use when it is necessary to be able to hold a value of
- mode MODE in a reload register for which class CLASS would
- ordinarily be used.
-
- Unlike `PREFERRED_RELOAD_CLASS', this macro should be used when
- there are certain modes that simply can't go in certain reload
- classes.
-
- The value is a register class; perhaps CLASS, or perhaps another,
- smaller class.
-
- Don't define this macro unless the target machine has limitations
- which require the macro to do something nontrivial. */
-
-/* SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X)
- `SECONDARY_RELOAD_CLASS (CLASS, MODE, X)'
- `SECONDARY_OUTPUT_RELOAD_CLASS (CLASS, MODE, X)'
- Many machines have some registers that cannot be copied directly
- to or from memory or even from other types of registers. An
- example is the `MQ' register, which on most machines, can only be
- copied to or from general registers, but not memory. Some
- machines allow copying all registers to and from memory, but
- require a scratch register for stores to some memory locations
- (e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In
- some cases, both an intermediate and a scratch register are
- required.
-
- You should define these macros to indicate to the reload phase
- that it may need to allocate at least one register for a reload in
- addition to the register to contain the data. Specifically, if
- copying X to a register CLASS in MODE requires an intermediate
- register, you should define `SECONDARY_INPUT_RELOAD_CLASS' to
- return the largest register class all of whose registers can be
- used as intermediate registers or scratch registers.
-
- If copying a register CLASS in MODE to X requires an intermediate
- or scratch register, `SECONDARY_OUTPUT_RELOAD_CLASS' should be
- defined to return the largest register class required. If the
- requirements for input and output reloads are the same, the macro
- `SECONDARY_RELOAD_CLASS' should be used instead of defining both
- macros identically.
-
- The values returned by these macros are often `GENERAL_REGS'.
- Return `NO_REGS' if no spare register is needed; i.e., if X can be
- directly copied to or from a register of CLASS in MODE without
- requiring a scratch register. Do not define this macro if it
- would always return `NO_REGS'.
-
- If a scratch register is required (either with or without an
- intermediate register), you should define patterns for
- `reload_inM' or `reload_outM', as required (*note Standard
- Names::.. These patterns, which will normally be implemented with
- a `define_expand', should be similar to the `movM' patterns,
- except that operand 2 is the scratch register.
-
- Define constraints for the reload register and scratch register
- that contain a single register class. If the original reload
- register (whose class is CLASS) can meet the constraint given in
- the pattern, the value returned by these macros is used for the
- class of the scratch register. Otherwise, two additional reload
- registers are required. Their classes are obtained from the
- constraints in the insn pattern.
-
- X might be a pseudo-register or a `subreg' of a pseudo-register,
- which could either be in a hard register or in memory. Use
- `true_regnum' to find out; it will return -1 if the pseudo is in
- memory and the hard register number if it is in a register.
-
- These macros should not be used in the case where a particular
- class of registers can only be copied to memory and not to another
- class of registers. In that case, secondary reload registers are
- not needed and would not be helpful. Instead, a stack location
- must be used to perform the copy and the `movM' pattern should use
- memory as an intermediate storage. This case often occurs between
- floating-point and general registers. */
-
-/* `SECONDARY_MEMORY_NEEDED (CLASS1, CLASS2, M)'
- Certain machines have the property that some registers cannot be
- copied to some other registers without using memory. Define this
- macro on those machines to be a C expression that is non-zero if
- objects of mode M in registers of CLASS1 can only be copied to
- registers of class CLASS2 by storing a register of CLASS1 into
- memory and loading that memory location into a register of CLASS2.
-
- Do not define this macro if its value would always be zero.
-
- `SECONDARY_MEMORY_NEEDED_RTX (MODE)'
- Normally when `SECONDARY_MEMORY_NEEDED' is defined, the compiler
- allocates a stack slot for a memory location needed for register
- copies. If this macro is defined, the compiler instead uses the
- memory location defined by this macro.
-
- Do not define this macro if you do not define
- `SECONDARY_MEMORY_NEEDED'. */
#define SMALL_REGISTER_CLASSES 1
-/* Normally the compiler avoids choosing registers that have been
- explicitly mentioned in the rtl as spill registers (these
- registers are normally those used to pass parameters and return
- values). However, some machines have so few registers of certain
- classes that there would not be enough registers to use as spill
- registers if this were done.
-
- Define `SMALL_REGISTER_CLASSES' to be an expression with a non-zero
- value on these machines. When this macro has a non-zero value, the
- compiler allows registers explicitly used in the rtl to be used as
- spill registers but avoids extending the lifetime of these
- registers.
-
- It is always safe to define this macro with a non-zero value, but
- if you unnecessarily define it, you will reduce the amount of
- optimizations that can be performed in some cases. If you do not
- define this macro with a non-zero value when it is required, the
- compiler will run out of spill registers and print a fatal error
- message. For most machines, you should not define this macro at
- all. */
#define CLASS_LIKELY_SPILLED_P(c) class_likely_spilled_p(c)
-/* A C expression whose value is nonzero if pseudos that have been
- assigned to registers of class CLASS would likely be spilled
- because registers of CLASS are needed for spill registers.
-
- The default value of this macro returns 1 if CLASS has exactly one
- register and zero otherwise. On most machines, this default
- should be used. Only define this macro to some other expression
- if pseudo allocated by `local-alloc.c' end up in memory because
- their hard registers were needed for spill registers. If this
- macro returns nonzero for those classes, those pseudos will only
- be allocated by `global.c', which knows how to reallocate the
- pseudo to another register. If there would not be another
- register available for reallocation, you should not change the
- definition of this macro since the only effect of such a
- definition would be to slow down register allocation. */
#define CLASS_MAX_NREGS(CLASS, MODE) class_max_nregs (CLASS, MODE)
-/* A C expression for the maximum number of consecutive registers of
- class CLASS needed to hold a value of mode MODE.
-
- This is closely related to the macro `HARD_REGNO_NREGS'. In fact,
- the value of the macro `CLASS_MAX_NREGS (CLASS, MODE)' should be
- the maximum value of `HARD_REGNO_NREGS (REGNO, MODE)' for all
- REGNO values in the class CLASS.
-
- This macro helps control the handling of multiple-word values in
- the reload pass. */
-
-#define CONST_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'I' ? (VALUE) >= 0 && (VALUE) <= 63 : \
- (C) == 'J' ? (VALUE) <= 0 && (VALUE) >= -63: \
- (C) == 'K' ? (VALUE) == 2 : \
- (C) == 'L' ? (VALUE) == 0 : \
- (C) == 'M' ? (VALUE) >= 0 && (VALUE) <= 0xff : \
- (C) == 'N' ? (VALUE) == -1: \
- (C) == 'O' ? (VALUE) == 8 || (VALUE) == 16 || (VALUE) == 24: \
- (C) == 'P' ? (VALUE) == 1 : \
- 0)
-
-/* A C expression that defines the machine-dependent operand
- constraint letters (`I', `J', `K', ... `P') that specify
- particular ranges of integer values. If C is one of those
- letters, the expression should check that VALUE, an integer, is in
- the appropriate range and return 1 if so, 0 otherwise. If C is
- not one of those letters, the value should be 0 regardless of
- VALUE. */
-
-#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'G' ? (VALUE) == CONST0_RTX (SFmode) \
- : 0)
-/* `CONST_DOUBLE_OK_FOR_LETTER_P (VALUE, C)'
- A C expression that defines the machine-dependent operand
- constraint letters that specify particular ranges of
- `const_double' values (`G' or `H').
-
- If C is one of those letters, the expression should check that
- VALUE, an RTX of code `const_double', is in the appropriate range
- and return 1 if so, 0 otherwise. If C is not one of those
- letters, the value should be 0 regardless of VALUE.
-
- `const_double' is used for all floating-point constants and for
- `DImode' fixed-point constants. A given letter can accept either
- or both kinds of values. It can use `GET_MODE' to distinguish
- between these kinds. */
-
-#define EXTRA_CONSTRAINT(x, c) extra_constraint(x, c)
-/* A C expression that defines the optional machine-dependent
- constraint letters (``Q', `R', `S', `T', `U') that can'
- be used to segregate specific types of operands, usually memory
- references, for the target machine. Normally this macro will not
- be defined. If it is required for a particular target machine, it
- should return 1 if VALUE corresponds to the operand type
- represented by the constraint letter C. If C is not defined as an
- extra constraint, the value returned should be 0 regardless of
- VALUE.
-
- For example, on the ROMP, load instructions cannot have their
- output in r0 if the memory reference contains a symbolic address.
- Constraint letter `Q' is defined as representing a memory address
- that does *not* contain a symbolic address. An alternative is
- specified with a `Q' constraint on the input and `r' on the
- output. The next alternative specifies `m' on the input and a
- register class that does not include r0 on the output. */
-
-/* This is an undocumented variable which describes
- how GCC will push a data */
+
#define STACK_PUSH_CODE POST_DEC
#define STACK_GROWS_DOWNWARD
-/* Define this macro if pushing a word onto the stack moves the stack
- pointer to a smaller address.
-
- When we say, "define this macro if ...," it means that the
- compiler checks this macro only with `#ifdef' so the precise
- definition used does not matter. */
#define STARTING_FRAME_OFFSET 1
-/* Offset from the frame pointer to the first local variable slot to
- be allocated.
-
- If `FRAME_GROWS_DOWNWARD', find the next slot's offset by
- subtracting the first slot's length from `STARTING_FRAME_OFFSET'.
- Otherwise, it is found by adding the length of the first slot to
- the value `STARTING_FRAME_OFFSET'. */
#define STACK_POINTER_OFFSET 1
-/* Offset from the stack pointer register to the first location at
- which outgoing arguments are placed. If not specified, the
- default value of zero is used. This is the proper value for most
- machines.
-
- If `ARGS_GROW_DOWNWARD', this is the offset to the location above
- the first location at which outgoing arguments are placed. */
#define FIRST_PARM_OFFSET(FUNDECL) 0
-/* Offset from the argument pointer register to the first argument's
- address. On some machines it may depend on the data type of the
- function.
-
- If `ARGS_GROW_DOWNWARD', this is the offset to the location above
- the first argument's address. */
-
-/* `STACK_DYNAMIC_OFFSET (FUNDECL)'
- Offset from the stack pointer register to an item dynamically
- allocated on the stack, e.g., by `alloca'.
-
- The default value for this macro is `STACK_POINTER_OFFSET' plus the
- length of the outgoing arguments. The default is correct for most
- machines. See `function.c' for details. */
#define STACK_BOUNDARY 8
-/* Define this macro if there is a guaranteed alignment for the stack
- pointer on this machine. The definition is a C expression for the
- desired alignment (measured in bits). This value is used as a
- default if PREFERRED_STACK_BOUNDARY is not defined. */
#define STACK_POINTER_REGNUM 32
-/* The register number of the stack pointer register, which must also
- be a fixed register according to `FIXED_REGISTERS'. On most
- machines, the hardware determines which register this is. */
#define FRAME_POINTER_REGNUM REG_Y
-/* The register number of the frame pointer register, which is used to
- access automatic variables in the stack frame. On some machines,
- the hardware determines which register this is. On other
- machines, you can choose any register you wish for this purpose. */
#define ARG_POINTER_REGNUM 34
-/* The register number of the arg pointer register, which is used to
- access the function's argument list. On some machines, this is
- the same as the frame pointer register. On some machines, the
- hardware determines which register this is. On other machines,
- you can choose any register you wish for this purpose. If this is
- not the same register as the frame pointer register, then you must
- mark it as a fixed register according to `FIXED_REGISTERS', or
- arrange to be able to eliminate it (*note Elimination::.). */
#define STATIC_CHAIN_REGNUM 2
-/* Register numbers used for passing a function's static chain
- pointer. If register windows are used, the register number as
- seen by the called function is `STATIC_CHAIN_INCOMING_REGNUM',
- while the register number as seen by the calling function is
- `STATIC_CHAIN_REGNUM'. If these registers are the same,
- `STATIC_CHAIN_INCOMING_REGNUM' need not be defined.
-
- The static chain register need not be a fixed register.
-
- If the static chain is passed in memory, these macros should not be
- defined; instead, the next two macros should be defined. */
#define FRAME_POINTER_REQUIRED frame_pointer_required_p()
-/* A C expression which is nonzero if a function must have and use a
- frame pointer. This expression is evaluated in the reload pass.
- If its value is nonzero the function will have a frame pointer.
-
- The expression can in principle examine the current function and
- decide according to the facts, but on most machines the constant 0
- or the constant 1 suffices. Use 0 when the machine allows code to
- be generated with no frame pointer, and doing so saves some time
- or space. Use 1 when there is no possible advantage to avoiding a
- frame pointer.
-
- In certain cases, the compiler does not know how to produce valid
- code without a frame pointer. The compiler recognizes those cases
- and automatically gives the function a frame pointer regardless of
- what `FRAME_POINTER_REQUIRED' says. You don't need to worry about
- them.
-
- In a function that does not require a frame pointer, the frame
- pointer register can be allocated for ordinary usage, unless you
- mark it as a fixed register. See `FIXED_REGISTERS' for more
- information. */
#define ELIMINABLE_REGS { \
{ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
{FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM} \
,{FRAME_POINTER_REGNUM+1,STACK_POINTER_REGNUM+1}}
-/* If defined, this macro specifies a table of register pairs used to
- eliminate unneeded registers that point into the stack frame. If
- it is not defined, the only elimination attempted by the compiler
- is to replace references to the frame pointer with references to
- the stack pointer.
-
- The definition of this macro is a list of structure
- initializations, each of which specifies an original and
- replacement register.
-
- On some machines, the position of the argument pointer is not
- known until the compilation is completed. In such a case, a
- separate hard register must be used for the argument pointer.
- This register can be eliminated by replacing it with either the
- frame pointer or the argument pointer, depending on whether or not
- the frame pointer has been eliminated.
-
- In this case, you might specify:
- #define ELIMINABLE_REGS \
- {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
- {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
- {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
-
- Note that the elimination of the argument pointer with the stack
- pointer is specified first since that is the preferred elimination. */
#define CAN_ELIMINATE(FROM, TO) (((FROM) == ARG_POINTER_REGNUM \
&& (TO) == FRAME_POINTER_REGNUM) \
|| (FROM) == FRAME_POINTER_REGNUM+1) \
&& ! FRAME_POINTER_REQUIRED \
))
-/* A C expression that returns non-zero if the compiler is allowed to
- try to replace register number FROM-REG with register number
- TO-REG. This macro need only be defined if `ELIMINABLE_REGS' is
- defined, and will usually be the constant 1, since most of the
- cases preventing register elimination are things that the compiler
- already knows about. */
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
OFFSET = initial_elimination_offset (FROM, TO)
-/* This macro is similar to `INITIAL_FRAME_POINTER_OFFSET'. It
- specifies the initial difference between the specified pair of
- registers. This macro must be defined if `ELIMINABLE_REGS' is
- defined. */
#define RETURN_ADDR_RTX(count, x) \
gen_rtx_MEM (Pmode, memory_address (Pmode, plus_constant (tem, 1)))
#define PUSH_ROUNDING(NPUSHED) (NPUSHED)
-/* A C expression that is the number of bytes actually pushed onto the
- stack when an instruction attempts to push NPUSHED bytes.
-
- If the target machine does not have a push instruction, do not
- define this macro. That directs GNU CC to use an alternate
- strategy: to allocate the entire argument block and then store the
- arguments into it.
-
- On some machines, the definition
-
- #define PUSH_ROUNDING(BYTES) (BYTES)
-
- will suffice. But on other machines, instructions that appear to
- push one byte actually push two bytes in an attempt to maintain
- alignment. Then the definition should be
-
- #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & ~1) */
#define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0
-/* A C expression that should indicate the number of bytes of its own
- arguments that a function pops on returning, or 0 if the function
- pops no arguments and the caller must therefore pop them all after
- the function returns.
-
- FUNDECL is a C variable whose value is a tree node that describes
- the function in question. Normally it is a node of type
- `FUNCTION_DECL' that describes the declaration of the function.
- From this you can obtain the DECL_ATTRIBUTES of the
- function.
-
- FUNTYPE is a C variable whose value is a tree node that describes
- the function in question. Normally it is a node of type
- `FUNCTION_TYPE' that describes the data type of the function.
- From this it is possible to obtain the data types of the value and
- arguments (if known).
-
- When a call to a library function is being considered, FUNDECL
- will contain an identifier node for the library function. Thus, if
- you need to distinguish among various library functions, you can
- do so by their names. Note that "library function" in this
- context means a function used to perform arithmetic, whose name is
- known specially in the compiler and was not mentioned in the C
- code being compiled.
-
- STACK-SIZE is the number of bytes of arguments passed on the
- stack. If a variable number of bytes is passed, it is zero, and
- argument popping will always be the responsibility of the calling
- function.
-
- On the VAX, all functions always pop their arguments, so the
- definition of this macro is STACK-SIZE. On the 68000, using the
- standard calling convention, no functions pop their arguments, so
- the value of the macro is always 0 in this case. But an
- alternative calling convention is available in which functions
- that take a fixed number of arguments pop them but other functions
- (such as `printf') pop nothing (the caller pops all). When this
- convention is in use, FUNTYPE is examined to determine whether a
- function takes a fixed number of arguments. */
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) (function_arg (&(CUM), MODE, TYPE, NAMED))
-/* A C expression that controls whether a function argument is passed
- in a register, and which register.
-
- The arguments are CUM, which summarizes all the previous
- arguments; MODE, the machine mode of the argument; TYPE, the data
- type of the argument as a tree node or 0 if that is not known
- (which happens for C support library functions); and NAMED, which
- is 1 for an ordinary argument and 0 for nameless arguments that
- correspond to `...' in the called function's prototype.
-
- The value of the expression is usually either a `reg' RTX for the
- hard register in which to pass the argument, or zero to pass the
- argument on the stack.
-
- For machines like the VAX and 68000, where normally all arguments
- are pushed, zero suffices as a definition.
-
- The value of the expression can also be a `parallel' RTX. This is
- used when an argument is passed in multiple locations. The mode
- of the of the `parallel' should be the mode of the entire
- argument. The `parallel' holds any number of `expr_list' pairs;
- each one describes where part of the argument is passed. In each
- `expr_list', the first operand can be either a `reg' RTX for the
- hard register in which to pass this part of the argument, or zero
- to pass the argument on the stack. If this operand is a `reg',
- then the mode indicates how large this part of the argument is.
- The second operand of the `expr_list' is a `const_int' which gives
- the offset in bytes into the entire argument where this part
- starts.
-
- The usual way to make the ANSI library `stdarg.h' work on a machine
- where some arguments are usually passed in registers, is to cause
- nameless arguments to be passed on the stack instead. This is done
- by making `FUNCTION_ARG' return 0 whenever NAMED is 0.
-
- You may use the macro `MUST_PASS_IN_STACK (MODE, TYPE)' in the
- definition of this macro to determine if this argument is of a
- type that must be passed in the stack. If `REG_PARM_STACK_SPACE'
- is not defined and `FUNCTION_ARG' returns non-zero for such an
- argument, the compiler will abort. If `REG_PARM_STACK_SPACE' is
- defined, the argument will be computed in the stack and then
- loaded into a register. */
typedef struct avr_args {
int nregs; /* # registers available for passing */
int regno; /* next available register number */
} CUMULATIVE_ARGS;
-/* A C type for declaring a variable that is used as the first
- argument of `FUNCTION_ARG' and other related values. For some
- target machines, the type `int' suffices and can hold the number
- of bytes of argument so far.
-
- There is no need to record in `CUMULATIVE_ARGS' anything about the
- arguments that have been passed on the stack. The compiler has
- other variables to keep track of that. For target machines on
- which all arguments are passed on the stack, there is no need to
- store anything in `CUMULATIVE_ARGS'; however, the data structure
- must exist and should not be empty, so use `int'. */
-
-#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) init_cumulative_args (&(CUM), FNTYPE, LIBNAME, INDIRECT)
-
-/* A C statement (sans semicolon) for initializing the variable CUM
- for the state at the beginning of the argument list. The variable
- has type `CUMULATIVE_ARGS'. The value of FNTYPE is the tree node
- for the data type of the function which will receive the args, or 0
- if the args are to a compiler support library function. The value
- of INDIRECT is nonzero when processing an indirect call, for
- example a call through a function pointer. The value of INDIRECT
- is zero for a call to an explicitly named function, a library
- function call, or when `INIT_CUMULATIVE_ARGS' is used to find
- arguments for the function being compiled.
-
- When processing a call to a compiler support library function,
- LIBNAME identifies which one. It is a `symbol_ref' rtx which
- contains the name of the function, as a string. LIBNAME is 0 when
- an ordinary C function call is being processed. Thus, each time
- this macro is called, either LIBNAME or FNTYPE is nonzero, but
- never both of them at once. */
+
+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
+ init_cumulative_args (&(CUM), FNTYPE, LIBNAME, FNDECL)
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
(function_arg_advance (&CUM, MODE, TYPE, NAMED))
-/* A C statement (sans semicolon) to update the summarizer variable
- CUM to advance past an argument in the argument list. The values
- MODE, TYPE and NAMED describe that argument. Once this is done,
- the variable CUM is suitable for analyzing the *following*
- argument with `FUNCTION_ARG', etc.
-
- This macro need not do anything if the argument in question was
- passed on the stack. The compiler knows how to track the amount
- of stack space used for arguments without any special help. */
-
#define FUNCTION_ARG_REGNO_P(r) function_arg_regno_p(r)
-/* A C expression that is nonzero if REGNO is the number of a hard
- register in which function arguments are sometimes passed. This
- does *not* include implicit arguments such as the static chain and
- the structure-value address. On many machines, no registers can be
- used for this purpose since all function arguments are pushed on
- the stack. */
extern int avr_reg_order[];
#define RET_REGISTER avr_ret_register ()
#define FUNCTION_VALUE(VALTYPE, FUNC) avr_function_value (VALTYPE, FUNC)
-/* A C expression to create an RTX representing the place where a
- function returns a value of data type VALTYPE. VALTYPE is a tree
- node representing a data type. Write `TYPE_MODE (VALTYPE)' to get
- the machine mode used to represent that type. On many machines,
- only the mode is relevant. (Actually, on most machines, scalar
- values are returned in the same place regardless of mode).
-
- The value of the expression is usually a `reg' RTX for the hard
- register where the return value is stored. The value can also be a
- `parallel' RTX, if the return value is in multiple places. See
- `FUNCTION_ARG' for an explanation of the `parallel' form.
-
- If `PROMOTE_FUNCTION_RETURN' is defined, you must apply the same
- promotion rules specified in `PROMOTE_MODE' if VALTYPE is a scalar
- type.
-
- If the precise function being called is known, FUNC is a tree node
- (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This
- makes it possible to use a different value-returning convention
- for specific functions when all their calls are known.
-
- `FUNCTION_VALUE' is not used for return vales with aggregate data
- types, because these are returned in another way. See
- `STRUCT_VALUE_REGNUM' and related macros, below. */
#define LIBCALL_VALUE(MODE) avr_libcall_value (MODE)
-/* A C expression to create an RTX representing the place where a
- library function returns a value of mode MODE. If the precise
- function being called is known, FUNC is a tree node
- (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This
- makes it possible to use a different value-returning convention
- for specific functions when all their calls are known.
-
- Note that "library function" in this context means a compiler
- support routine, used to perform arithmetic, whose name is known
- specially by the compiler and was not mentioned in the C code being
- compiled.
-
- The definition of `LIBRARY_VALUE' need not be concerned aggregate
- data types, because none of the library functions returns such
- types. */
-
-#define FUNCTION_VALUE_REGNO_P(N) ((N) == RET_REGISTER)
-/* A C expression that is nonzero if REGNO is the number of a hard
- register in which the values of called function may come back.
-
- A register whose use for returning values is limited to serving as
- the second of a pair (for a value of type `double', say) need not
- be recognized by this macro. So for most machines, this definition
- suffices:
-
- #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
-
- If the machine has register windows, so that the caller and the
- called function use different registers for the return value, this
- macro should recognize only the caller's register numbers. */
-
-#define RETURN_IN_MEMORY(TYPE) ((TYPE_MODE (TYPE) == BLKmode) \
- ? int_size_in_bytes (TYPE) > 8 \
- : 0)
-/* A C expression which can inhibit the returning of certain function
- values in registers, based on the type of value. A nonzero value
- says to return the function value in memory, just as large
- structures are always returned. Here TYPE will be a C expression
- of type `tree', representing the data type of the value.
-
- Note that values of mode `BLKmode' must be explicitly handled by
- this macro. Also, the option `-fpcc-struct-return' takes effect
- regardless of this macro. On most systems, it is possible to
- leave the macro undefined; this causes a default definition to be
- used, whose value is the constant 1 for `BLKmode' values, and 0
- otherwise.
-
- Do not use this macro to indicate that structures and unions
- should always be returned in memory. You should instead use
- `DEFAULT_PCC_STRUCT_RETURN' to indicate this. */
+
+#define FUNCTION_VALUE_REGNO_P(N) ((int) (N) == RET_REGISTER)
#define DEFAULT_PCC_STRUCT_RETURN 0
-/* Define this macro to be 1 if all structure and union return values
- must be in memory. Since this results in slower code, this should
- be defined only if needed for compatibility with other compilers
- or with an ABI. If you define this macro to be 0, then the
- conventions used for structure and union return values are decided
- by the `RETURN_IN_MEMORY' macro.
-
- If not defined, this defaults to the value 1. */
-
-#define STRUCT_VALUE 0
-/* If the structure value address is not passed in a register, define
- `STRUCT_VALUE' as an expression returning an RTX for the place
- where the address is passed. If it returns 0, the address is
- passed as an "invisible" first argument. */
-
-#define STRUCT_VALUE_INCOMING 0
-/* If the incoming location is not a register, then you should define
- `STRUCT_VALUE_INCOMING' as an expression for an RTX for where the
- called function should find the value. If it should find the
- value on the stack, define this to create a `mem' which refers to
- the frame pointer. A definition of 0 means that the address is
- passed as an "invisible" first argument. */
#define EPILOGUE_USES(REGNO) 0
-/* Define this macro as a C expression that is nonzero for registers
- are used by the epilogue or the `return' pattern. The stack and
- frame pointer registers are already be assumed to be used as
- needed. */
-
-#define STRICT_ARGUMENT_NAMING 1
-/* Define this macro if the location where a function argument is
- passed depends on whether or not it is a named argument.
-
- This macro controls how the NAMED argument to `FUNCTION_ARG' is
- set for varargs and stdarg functions. With this macro defined,
- the NAMED argument is always true for named arguments, and false
- for unnamed arguments. If this is not defined, but
- `SETUP_INCOMING_VARARGS' is defined, then all arguments are
- treated as named. Otherwise, all named arguments except the last
- are treated as named. */
-
#define HAVE_POST_INCREMENT 1
-/* Define this macro if the machine supports post-increment
- addressing. */
-
#define HAVE_PRE_DECREMENT 1
-/* #define HAVE_PRE_INCREMENT
- #define HAVE_POST_DECREMENT */
-/* Similar for other kinds of addressing. */
#define CONSTANT_ADDRESS_P(X) CONSTANT_P (X)
-/* A C expression that is 1 if the RTX X is a constant which is a
- valid address. On most machines, this can be defined as
- `CONSTANT_P (X)', but a few machines are more restrictive in which
- constant addresses are supported.
-
- `CONSTANT_P' accepts integer-values expressions whose values are
- not explicitly known, such as `symbol_ref', `label_ref', and
- `high' expressions and `const' arithmetic expressions, in addition
- to `const_int' and `const_double' expressions. */
#define MAX_REGS_PER_ADDRESS 1
-/* A number, the maximum number of registers that can appear in a
- valid memory address. Note that it is up to you to specify a
- value equal to the maximum number that `GO_IF_LEGITIMATE_ADDRESS'
- would ever accept. */
#ifdef REG_OK_STRICT
# define GO_IF_LEGITIMATE_ADDRESS(mode, operand, ADDR) \
goto ADDR; \
}
#endif
-/* A C compound statement with a conditional `goto LABEL;' executed
- if X (an RTX) is a legitimate memory address on the target machine
- for a memory operand of mode MODE.
-
- It usually pays to define several simpler macros to serve as
- subroutines for this one. Otherwise it may be too complicated to
- understand.
-
- This macro must exist in two variants: a strict variant and a
- non-strict one. The strict variant is used in the reload pass. It
- must be defined so that any pseudo-register that has not been
- allocated a hard register is considered a memory reference. In
- contexts where some kind of register is required, a pseudo-register
- with no hard register must be rejected.
-
- The non-strict variant is used in other passes. It must be
- defined to accept all pseudo-registers in every context where some
- kind of register is required.
-
- Compiler source files that want to use the strict variant of this
- macro define the macro `REG_OK_STRICT'. You should use an `#ifdef
- REG_OK_STRICT' conditional to define the strict variant in that
- case and the non-strict variant otherwise.
-
- Subroutines to check for acceptable registers for various purposes
- (one for base registers, one for index registers, and so on) are
- typically among the subroutines used to define
- `GO_IF_LEGITIMATE_ADDRESS'. Then only these subroutine macros
- need have two variants; the higher levels of macros may be the
- same whether strict or not.
-
- Normally, constant addresses which are the sum of a `symbol_ref'
- and an integer are stored inside a `const' RTX to mark them as
- constant. Therefore, there is no need to recognize such sums
- specifically as legitimate addresses. Normally you would simply
- recognize any `const' as legitimate.
-
- Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant
- sums that are not marked with `const'. It assumes that a naked
- `plus' indicates indexing. If so, then you *must* reject such
- naked constant sums as illegitimate addresses, so that none of
- them will be given to `PRINT_OPERAND_ADDRESS'.
-
- On some machines, whether a symbolic address is legitimate depends
- on the section that the address refers to. On these machines,
- define the macro `ENCODE_SECTION_INFO' to store the information
- into the `symbol_ref', and then check for it here. When you see a
- `const', you will have to look inside it to find the `symbol_ref'
- in order to determine the section. *Note Assembler Format::.
-
- The best way to modify the name string is by adding text to the
- beginning, with suitable punctuation to prevent any ambiguity.
- Allocate the new name in `saveable_obstack'. You will have to
- modify `ASM_OUTPUT_LABELREF' to remove and decode the added text
- and output the name accordingly, and define `STRIP_NAME_ENCODING'
- to access the original name string.
-
- You can check the information stored here into the `symbol_ref' in
- the definitions of the macros `GO_IF_LEGITIMATE_ADDRESS' and
- `PRINT_OPERAND_ADDRESS'. */
-
-/* `REG_OK_FOR_BASE_P (X)'
- A C expression that is nonzero if X (assumed to be a `reg' RTX) is
- valid for use as a base register. For hard registers, it should
- always accept those which the hardware permits and reject the
- others. Whether the macro accepts or rejects pseudo registers
- must be controlled by `REG_OK_STRICT' as described above. This
- usually requires two variant definitions, of which `REG_OK_STRICT'
- controls the one actually used. */
#define REG_OK_FOR_BASE_NOSTRICT_P(X) \
(REGNO (X) >= FIRST_PSEUDO_REGISTER || REG_OK_FOR_BASE_STRICT_P(X))
# define REG_OK_FOR_BASE_P(X) REG_OK_FOR_BASE_NOSTRICT_P (X)
#endif
-/* A C expression that is just like `REG_OK_FOR_BASE_P', except that
- that expression may examine the mode of the memory reference in
- MODE. You should define this macro if the mode of the memory
- reference affects whether a register may be used as a base
- register. If you define this macro, the compiler will use it
- instead of `REG_OK_FOR_BASE_P'. */
#define REG_OK_FOR_INDEX_P(X) 0
-/* A C expression that is nonzero if X (assumed to be a `reg' RTX) is
- valid for use as an index register.
-
- The difference between an index register and a base register is
- that the index register may be scaled. If an address involves the
- sum of two registers, neither one of them scaled, then either one
- may be labeled the "base" and the other the "index"; but whichever
- labeling is used must fit the machine's constraints of which
- registers may serve in each capacity. The compiler will try both
- labelings, looking for one that is valid, and will reload one or
- both registers only if neither labeling works. */
#define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
{ \
if (memory_address_p (MODE, X)) \
goto WIN; \
}
-/* A C compound statement that attempts to replace X with a valid
- memory address for an operand of mode MODE. WIN will be a C
- statement label elsewhere in the code; the macro definition may use
-
- GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN);
-
- to avoid further processing if the address has become legitimate.
-
- X will always be the result of a call to `break_out_memory_refs',
- and OLDX will be the operand that was given to that function to
- produce X.
-
- The code generated by this macro should not alter the substructure
- of X. If it transforms X into a more legitimate form, it should
- assign X (which will always be a C variable) a new value.
-
- It is not necessary for this macro to come up with a legitimate
- address. The compiler has standard ways of doing so in all cases.
- In fact, it is safe for this macro to do nothing. But often a
- machine-dependent strategy can generate better code. */
#define XEXP_(X,Y) (X)
#define LEGITIMIZE_RELOAD_ADDRESS(X, MODE, OPNUM, TYPE, IND_LEVELS, WIN) \
} \
} \
} while(0)
-/* A C compound statement that attempts to replace X, which is an
- address that needs reloading, with a valid memory address for an
- operand of mode MODE. WIN will be a C statement label elsewhere
- in the code. It is not necessary to define this macro, but it
- might be useful for performance reasons.
-
- For example, on the i386, it is sometimes possible to use a single
- reload register instead of two by reloading a sum of two pseudo
- registers into a register. On the other hand, for number of RISC
- processors offsets are limited so that often an intermediate
- address needs to be generated in order to address a stack slot.
- By defining LEGITIMIZE_RELOAD_ADDRESS appropriately, the
- intermediate addresses generated for adjacent some stack slots can
- be made identical, and thus be shared.
-
- *Note*: This macro should be used with caution. It is necessary
- to know something of how reload works in order to effectively use
- this, and it is quite easy to produce macros that build in too
- much knowledge of reload internals.
-
- *Note*: This macro must be able to reload an address created by a
- previous invocation of this macro. If it fails to handle such
- addresses then the compiler may generate incorrect code or abort.
-
- The macro definition should use `push_reload' to indicate parts
- that need reloading; OPNUM, TYPE and IND_LEVELS are usually
- suitable to be passed unaltered to `push_reload'.
-
- The code generated by this macro must not alter the substructure of
- X. If it transforms X into a more legitimate form, it should
- assign X (which will always be a C variable) a new value. This
- also applies to parts that you change indirectly by calling
- `push_reload'.
-
- The macro definition may use `strict_memory_address_p' to test if
- the address has become legitimate.
-
- If you want to change only a part of X, one standard way of doing
- this is to use `copy_rtx'. Note, however, that is unshares only a
- single level of rtl. Thus, if the part to be changed is not at the
- top level, you'll need to replace first the top leve It is not
- necessary for this macro to come up with a legitimate address;
- but often a machine-dependent strategy can generate better code. */
-
+
#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
if (GET_CODE (ADDR) == POST_INC || GET_CODE (ADDR) == PRE_DEC) \
goto LABEL
-/* A C statement or compound statement with a conditional `goto
- LABEL;' executed if memory address X (an RTX) can have different
- meanings depending on the machine mode of the memory reference it
- is used for or if the address is valid for some modes but not
- others.
-
- Autoincrement and autodecrement addresses typically have
- mode-dependent effects because the amount of the increment or
- decrement is the size of the operand being addressed. Some
- machines have other mode-dependent addresses. Many RISC machines
- have no mode-dependent addresses.
-
- You may assume that ADDR is a valid address for the machine. */
#define LEGITIMATE_CONSTANT_P(X) 1
-/* A C expression that is nonzero if X is a legitimate constant for
- an immediate operand on the target machine. You can assume that X
- satisfies `CONSTANT_P', so you need not check this. In fact, `1'
- is a suitable definition for this macro on machines where anything
- `CONSTANT_P' is valid. */
-
-#define CONST_COSTS(x,CODE,OUTER_CODE) \
- case CONST_INT: \
- if (OUTER_CODE == PLUS \
- || OUTER_CODE == IOR \
- || OUTER_CODE == AND \
- || OUTER_CODE == MINUS \
- || OUTER_CODE == SET \
- || INTVAL (x) == 0) \
- return 2; \
- if (OUTER_CODE == COMPARE \
- && INTVAL (x) >= 0 \
- && INTVAL (x) <= 255) \
- return 2; \
- case CONST: \
- case LABEL_REF: \
- case SYMBOL_REF: \
- return 4; \
- case CONST_DOUBLE: \
- return 4;
-
-/* A part of a C `switch' statement that describes the relative costs
- of constant RTL expressions. It must contain `case' labels for
- expression codes `const_int', `const', `symbol_ref', `label_ref'
- and `const_double'. Each case must ultimately reach a `return'
- statement to return the relative cost of the use of that kind of
- constant value in an expression. The cost may depend on the
- precise value of the constant, which is available for examination
- in X, and the rtx code of the expression in which it is contained,
- found in OUTER_CODE.
-
- CODE is the expression code--redundant, since it can be obtained
- with `GET_CODE (X)'. */
-
-#define DEFAULT_RTX_COSTS(x, code, outer_code) \
-{ \
- int cst = default_rtx_costs (x, code, outer_code); \
- if (cst>0) \
- return cst; \
- else if (cst<0) \
- total += -cst; \
- break; \
-}
-
-/* Like `CONST_COSTS' but applies to nonconstant RTL expressions.
- This can be used, for example, to indicate how costly a multiply
- instruction is. In writing this macro, you can use the construct
- `COSTS_N_INSNS (N)' to specify a cost equal to N fast
- instructions. OUTER_CODE is the code of the expression in which X
- is contained.
-
- This macro is optional; do not define it if the default cost
- assumptions are adequate for the target machine. */
-
-#define ADDRESS_COST(ADDRESS) avr_address_cost (ADDRESS)
-
-/* An expression giving the cost of an addressing mode that contains
- ADDRESS. If not defined, the cost is computed from the ADDRESS
- expression and the `CONST_COSTS' values.
-
- For most CISC machines, the default cost is a good approximation
- of the true cost of the addressing mode. However, on RISC
- machines, all instructions normally have the same length and
- execution time. Hence all addresses will have equal costs.
-
- In cases where more than one form of an address is known, the form
- with the lowest cost will be used. If multiple forms have the
- same, lowest, cost, the one that is the most complex will be used.
-
- For example, suppose an address that is equal to the sum of a
- register and a constant is used twice in the same basic block.
- When this macro is not defined, the address will be computed in a
- register and memory references will be indirect through that
- register. On machines where the cost of the addressing mode
- containing the sum is no higher than that of a simple indirect
- reference, this will produce an additional instruction and
- possibly require an additional register. Proper specification of
- this macro eliminates this overhead for such machines.
-
- Similar use of this macro is made in strength reduction of loops.
-
- ADDRESS need not be valid as an address. In such a case, the cost
- is not relevant and can be any value; invalid addresses need not be
- assigned a different cost.
-
- On machines where an address involving more than one register is as
- cheap as an address computation involving only one register,
- defining `ADDRESS_COST' to reflect this can cause two registers to
- be live over a region of code where only one would have been if
- `ADDRESS_COST' were not defined in that manner. This effect should
- be considered in the definition of this macro. Equivalent costs
- should probably only be given to addresses with different numbers
- of registers on machines with lots of registers.
-
- This macro will normally either not be defined or be defined as a
- constant. */
#define REGISTER_MOVE_COST(MODE, FROM, TO) ((FROM) == STACK_REG ? 6 \
: (TO) == STACK_REG ? 12 \
: 2)
-/* A C expression for the cost of moving data from a register in class
- FROM to one in class TO. The classes are expressed using the
- enumeration values such as `GENERAL_REGS'. A value of 2 is the
- default; other values are interpreted relative to that.
-
- It is not required that the cost always equal 2 when FROM is the
- same as TO; on some machines it is expensive to move between
- registers if they are not general registers.
-
- If reload sees an insn consisting of a single `set' between two
- hard registers, and if `REGISTER_MOVE_COST' applied to their
- classes returns a value of 2, reload does not check to ensure that
- the constraints of the insn are met. Setting a cost of other than
- 2 will allow reload to verify that the constraints are met. You
- should do this if the `movM' pattern's constraints do not allow
- such copying. */
#define MEMORY_MOVE_COST(MODE,CLASS,IN) ((MODE)==QImode ? 2 : \
(MODE)==HImode ? 4 : \
(MODE)==SImode ? 8 : \
(MODE)==SFmode ? 8 : 16)
-/* A C expression for the cost of moving data of mode M between a
- register and memory. A value of 4 is the default; this cost is
- relative to those in `REGISTER_MOVE_COST'.
-
- If moving between registers and memory is more expensive than
- between two registers, you should define this macro to express the
- relative cost. */
#define BRANCH_COST 0
-/* A C expression for the cost of a branch instruction. A value of 1
- is the default; other values are interpreted relative to that.
-
- Here are additional macros which do not specify precise relative
- costs, but only that certain actions are more expensive than GCC would
- ordinarily expect. */
#define SLOW_BYTE_ACCESS 0
-/* Define this macro as a C expression which is nonzero if accessing
- less than a word of memory (i.e. a `char' or a `short') is no
- faster than accessing a word of memory, i.e., if such access
- require more than one instruction or if there is no difference in
- cost between byte and (aligned) word loads.
-
- When this macro is not defined, the compiler will access a field by
- finding the smallest containing object; when it is defined, a
- fullword load will be used if alignment permits. Unless bytes
- accesses are faster than word accesses, using word accesses is
- preferable since it may eliminate subsequent memory access if
- subsequent accesses occur to other fields in the same word of the
- structure, but to different bytes.
-
- `SLOW_ZERO_EXTEND'
- Define this macro if zero-extension (of a `char' or `short' to an
- `int') can be done faster if the destination is a register that is
- known to be zero.
-
- If you define this macro, you must have instruction patterns that
- recognize RTL structures like this:
-
- (set (strict_low_part (subreg:QI (reg:SI ...) 0)) ...)
-
- and likewise for `HImode'.
-
- `SLOW_UNALIGNED_ACCESS'
- Define this macro to be the value 1 if unaligned accesses have a
- cost many times greater than aligned accesses, for example if they
- are emulated in a trap handler.
-
- When this macro is non-zero, the compiler will act as if
- `STRICT_ALIGNMENT' were non-zero when generating code for block
- moves. This can cause significantly more instructions to be
- produced. Therefore, do not set this macro non-zero if unaligned
- accesses only add a cycle or two to the time for a memory access.
-
- If the value of this macro is always zero, it need not be defined.
-
- `DONT_REDUCE_ADDR'
- Define this macro to inhibit strength reduction of memory
- addresses. (On some machines, such strength reduction seems to do
- harm rather than good.)
-
- `MOVE_RATIO'
- The number of scalar move insns which should be generated instead
- of a string move insn or a library call. Increasing the value
- will always make code faster, but eventually incurs high cost in
- increased code size.
-
- If you don't define this, a reasonable default is used. */
#define NO_FUNCTION_CSE
-/* Define this macro if it is as good or better to call a constant
- function address than to call an address kept in a register. */
-
-#define NO_RECURSIVE_FUNCTION_CSE
-/* Define this macro if it is as good or better for a function to call
- itself with an explicit address than to call an address kept in a
- register. */
#define TEXT_SECTION_ASM_OP "\t.text"
-/* A C expression whose value is a string containing the assembler
- operation that should precede instructions and read-only data.
- Normally `"\t.text"' is right. */
#define DATA_SECTION_ASM_OP "\t.data"
-/* A C expression whose value is a string containing the assembler
- operation to identify the following data as writable initialized
- data. Normally `"\t.data"' is right. */
-
-#define EXTRA_SECTIONS in_progmem
-/* A list of names for sections other than the standard two, which are
- `in_text' and `in_data'. You need not define this macro on a
- system with no other sections (that GCC needs to use). */
-
-#define EXTRA_SECTION_FUNCTIONS \
- \
-void \
-progmem_section (void) \
-{ \
- if (in_section != in_progmem) \
- { \
- fprintf (asm_out_file, \
- "\t.section .progmem.gcc_sw_table, \"%s\", @progbits\n", \
- AVR_MEGA ? "a" : "ax"); \
- /* Should already be aligned, this is just to be safe if it isn't. */ \
- fprintf (asm_out_file, "\t.p2align 1\n"); \
- in_section = in_progmem; \
- } \
-}
-/* `EXTRA_SECTION_FUNCTIONS'
- One or more functions to be defined in `varasm.c'. These
- functions should do jobs analogous to those of `text_section' and
- `data_section', for your additional sections. Do not define this
- macro if you do not define `EXTRA_SECTIONS'. */
-
-#define READONLY_DATA_SECTION data_section
-/* On most machines, read-only variables, constants, and jump tables
- are placed in the text section. If this is not the case on your
- machine, this macro should be defined to be the name of a function
- (either `data_section' or a function defined in `EXTRA_SECTIONS')
- that switches to the section to be used for read-only items.
-
- If these items should be placed in the text section, this macro
- should not be defined. */
-
-/* `SELECT_SECTION (EXP, RELOC, ALIGN)'
- A C statement or statements to switch to the appropriate section
- for output of EXP. You can assume that EXP is either a `VAR_DECL'
- node or a constant of some sort. RELOC indicates whether the
- initial value of EXP requires link-time relocations. Select the
- section by calling `text_section' or one of the alternatives for
- other sections.
-
- Do not define this macro if you put all read-only variables and
- constants in the read-only data section (usually the text section). */
-
-/* `SELECT_RTX_SECTION (MODE, RTX, ALIGN)'
- A C statement or statements to switch to the appropriate section
- for output of RTX in mode MODE. You can assume that RTX is some
- kind of constant in RTL. The argument MODE is redundant except in
- the case of a `const_int' rtx. Select the section by calling
- `text_section' or one of the alternatives for other sections.
-
- Do not define this macro if you put all constants in the read-only
- data section. */
-#define JUMP_TABLES_IN_TEXT_SECTION 0
-/* Define this macro if jump tables (for `tablejump' insns) should be
- output in the text section, along with the assembler instructions.
- Otherwise, the readonly data section is used.
-
- This macro is irrelevant if there is no separate readonly data
- section. */
-
-#define ENCODE_SECTION_INFO(DECL) encode_section_info(DECL)
-/* Define this macro if references to a symbol must be treated
- differently depending on something about the variable or function
- named by the symbol (such as what section it is in).
-
- The macro definition, if any, is executed immediately after the
- rtl for DECL has been created and stored in `DECL_RTL (DECL)'.
- The value of the rtl will be a `mem' whose address is a
- `symbol_ref'.
-
- The usual thing for this macro to do is to record a flag in the
- `symbol_ref' (such as `SYMBOL_REF_FLAG') or to store a modified
- name string in the `symbol_ref' (if one bit is not enough
- information). */
-
-#define STRIP_NAME_ENCODING(VAR,SYMBOL_NAME) \
- (VAR) = (SYMBOL_NAME) + ((SYMBOL_NAME)[0] == '*' || (SYMBOL_NAME)[0] == '@');
-/* `STRIP_NAME_ENCODING (VAR, SYM_NAME)'
- Decode SYM_NAME and store the real name part in VAR, sans the
- characters that encode section info. Define this macro if
- `ENCODE_SECTION_INFO' alters the symbol's name string. */
-
-#define UNIQUE_SECTION(DECL, RELOC) unique_section (DECL, RELOC)
-/* `UNIQUE_SECTION (DECL, RELOC)'
- A C statement to build up a unique section name, expressed as a
- STRING_CST node, and assign it to `DECL_SECTION_NAME (DECL)'.
- RELOC indicates whether the initial value of EXP requires
- link-time relocations. If you do not define this macro, GNU CC
- will use the symbol name prefixed by `.' as the section name. */
-
-#define ASM_FILE_START(STREAM) asm_file_start (STREAM)
-/* A C expression which outputs to the stdio stream STREAM some
- appropriate text to go at the start of an assembler file.
-
- Normally this macro is defined to output a line containing
- `#NO_APP', which is a comment that has no effect on most
- assemblers but tells the GNU assembler that it can save time by not
- checking for certain assembler constructs.
-
- On systems that use SDB, it is necessary to output certain
- commands; see `attasm.h'. */
-
-#define ASM_FILE_END(STREAM) asm_file_end (STREAM)
-/* A C expression which outputs to the stdio stream STREAM some
- appropriate text to go at the end of an assembler file.
-
- If this macro is not defined, the default is to output nothing
- special at the end of the file. Most systems don't require any
- definition.
-
- On systems that use SDB, it is necessary to output certain
- commands; see `attasm.h'. */
+#define BSS_SECTION_ASM_OP "\t.section .bss"
-#define ASM_COMMENT_START " ; "
-/* A C string constant describing how to begin a comment in the target
- assembler language. The compiler assumes that the comment will
- end at the end of the line. */
+/* Define the pseudo-ops used to switch to the .ctors and .dtors sections.
+ There are no shared libraries on this target, and these sections are
+ placed in the read-only program memory, so they are not writable. */
-#define ASM_APP_ON "/* #APP */\n"
-/* A C string constant for text to be output before each `asm'
- statement or group of consecutive ones. Normally this is
- `"#APP"', which is a comment that has no effect on most assemblers
- but tells the GNU assembler that it must check the lines that
- follow for all valid assembler constructs. */
+#undef CTORS_SECTION_ASM_OP
+#define CTORS_SECTION_ASM_OP "\t.section .ctors,\"a\",@progbits"
-#define ASM_APP_OFF "/* #NOAPP */\n"
-/* A C string constant for text to be output after each `asm'
- statement or group of consecutive ones. Normally this is
- `"#NO_APP"', which tells the GNU assembler to resume making the
- time-saving assumptions that are valid for ordinary compiler
- output. */
+#undef DTORS_SECTION_ASM_OP
+#define DTORS_SECTION_ASM_OP "\t.section .dtors,\"a\",@progbits"
-#define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE) fprintf (STREAM,"/* line: %d */\n",LINE)
-/* A C statement to output DBX or SDB debugging information before
- code for line number LINE of the current source file to the stdio
- stream STREAM.
+#define TARGET_ASM_CONSTRUCTOR avr_asm_out_ctor
- This macro need not be defined if the standard form of debugging
- information for the debugger in use is appropriate. */
+#define TARGET_ASM_DESTRUCTOR avr_asm_out_dtor
-/* Switch into a generic section. */
-#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
-
-#define OBJC_PROLOGUE {}
-/* A C statement to output any assembler statements which are
- required to precede any Objective C object definitions or message
- sending. The statement is executed only when compiling an
- Objective C program. */
-
-
-
-#define ASM_OUTPUT_DOUBLE(STREAM, VALUE) fprintf (STREAM, "no double float %.20e\n", VALUE)
-#define ASM_OUTPUT_FLOAT(STREAM, VALUE) asm_output_float (STREAM, VALUE)
-/* `ASM_OUTPUT_LONG_DOUBLE (STREAM, VALUE)'
- `ASM_OUTPUT_THREE_QUARTER_FLOAT (STREAM, VALUE)'
- `ASM_OUTPUT_SHORT_FLOAT (STREAM, VALUE)'
- `ASM_OUTPUT_BYTE_FLOAT (STREAM, VALUE)'
- A C statement to output to the stdio stream STREAM an assembler
- instruction to assemble a floating-point constant of `TFmode',
- `DFmode', `SFmode', `TQFmode', `HFmode', or `QFmode',
- respectively, whose value is VALUE. VALUE will be a C expression
- of type `REAL_VALUE_TYPE'. Macros such as
- `REAL_VALUE_TO_TARGET_DOUBLE' are useful for writing these
- definitions. */
-
-
-#define ASM_OUTPUT_INT(FILE, VALUE) \
- ( fprintf (FILE, "\t.long "), \
- output_addr_const (FILE, (VALUE)), \
- fputs ("\n", FILE))
-
- /* Likewise for `short' and `char' constants. */
-
-#define ASM_OUTPUT_SHORT(FILE,VALUE) asm_output_short(FILE,VALUE)
-#define ASM_OUTPUT_CHAR(FILE,VALUE) asm_output_char(FILE,VALUE)
-
-/* `ASM_OUTPUT_QUADRUPLE_INT (STREAM, EXP)'
- A C statement to output to the stdio stream STREAM an assembler
- instruction to assemble an integer of 16, 8, 4, 2 or 1 bytes,
- respectively, whose value is VALUE. The argument EXP will be an
- RTL expression which represents a constant value. Use
- `output_addr_const (STREAM, EXP)' to output this value as an
- assembler expression.
+#define JUMP_TABLES_IN_TEXT_SECTION 0
- For sizes larger than `UNITS_PER_WORD', if the action of a macro
- would be identical to repeatedly calling the macro corresponding to
- a size of `UNITS_PER_WORD', once for each word, you need not define
- the macro. */
+#define ASM_COMMENT_START " ; "
+#define ASM_APP_ON "/* #APP */\n"
-#define ASM_OUTPUT_BYTE(FILE,VALUE) asm_output_byte (FILE,VALUE)
-/* A C statement to output to the stdio stream STREAM an assembler
- instruction to assemble a single byte containing the number VALUE. */
+#define ASM_APP_OFF "/* #NOAPP */\n"
-#define ASM_BYTE_OP "\t.byte "
-/* A C string constant giving the pseudo-op to use for a sequence of
- single-byte constants. If this macro is not defined, the default
- is `"\t.byte\t"'. */
+/* Switch into a generic section. */
+#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
+#define TARGET_ASM_INIT_SECTIONS avr_asm_init_sections
#define ASM_OUTPUT_ASCII(FILE, P, SIZE) gas_output_ascii (FILE,P,SIZE)
-/* `ASM_OUTPUT_ASCII (STREAM, PTR, LEN)'
- output_ascii (FILE, P, SIZE)
- A C statement to output to the stdio stream STREAM an assembler
- instruction to assemble a string constant containing the LEN bytes
- at PTR. PTR will be a C expression of type `char *' and LEN a C
- expression of type `int'.
-
- If the assembler has a `.ascii' pseudo-op as found in the Berkeley
- Unix assembler, do not define the macro `ASM_OUTPUT_ASCII'. */
#define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == '\n' \
|| ((C) == '$'))
-/* Define this macro as a C expression which is nonzero if C is used
- as a logical line separator by the assembler.
-
- If you do not define this macro, the default is that only the
- character `;' is treated as a logical line separator. */
-
-/* These macros are provided by `real.h' for writing the definitions of
- `ASM_OUTPUT_DOUBLE' and the like: */
#define ASM_OUTPUT_COMMON(STREAM, NAME, SIZE, ROUNDED) \
do { \
fputs ("\t.comm ", (STREAM)); \
assemble_name ((STREAM), (NAME)); \
- fprintf ((STREAM), ",%d,1\n", (SIZE)); \
+ fprintf ((STREAM), ",%lu,1\n", (unsigned long)(SIZE)); \
} while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM the assembler definition of a common-label named NAME whose
- size is SIZE bytes. The variable ROUNDED is the size rounded up
- to whatever alignment the caller wants.
- Use the expression `assemble_name (STREAM, NAME)' to output the
- name itself; before and after that, output the additional
- assembler syntax for defining the name, and a newline.
-
- This macro controls how the assembler definitions of uninitialized
- common global variables are output. */
+#define ASM_OUTPUT_BSS(FILE, DECL, NAME, SIZE, ROUNDED) \
+ asm_output_bss ((FILE), (DECL), (NAME), (SIZE), (ROUNDED))
#define ASM_OUTPUT_LOCAL(STREAM, NAME, SIZE, ROUNDED) \
do { \
fputs ("\t.lcomm ", (STREAM)); \
assemble_name ((STREAM), (NAME)); \
- fprintf ((STREAM), ",%d\n", (SIZE)); \
+ fprintf ((STREAM), ",%d\n", (int)(SIZE)); \
} while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM the assembler definition of a local-common-label named NAME
- whose size is SIZE bytes. The variable ROUNDED is the size
- rounded up to whatever alignment the caller wants.
-
- Use the expression `assemble_name (STREAM, NAME)' to output the
- name itself; before and after that, output the additional
- assembler syntax for defining the name, and a newline.
-
- This macro controls how the assembler definitions of uninitialized
- static variables are output. */
-
-#define ASM_OUTPUT_LABEL(STREAM, NAME) \
-{ \
- assemble_name (STREAM, NAME); \
- fprintf (STREAM, ":\n"); \
-}
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM the assembler definition of a label named NAME. Use the
- expression `assemble_name (STREAM, NAME)' to output the name
- itself; before and after that, output the additional assembler
- syntax for defining the name, and a newline. */
#undef TYPE_ASM_OP
#undef SIZE_ASM_OP
is just a default. You may need to override it in your machine-
specific tm.h file (depending upon the particulars of your assembler). */
-
-#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
-do { \
- fprintf (FILE, "%s", TYPE_ASM_OP); \
- assemble_name (FILE, NAME); \
- putc (',', FILE); \
- fprintf (FILE, TYPE_OPERAND_FMT, "function"); \
- putc ('\n', FILE); \
- ASM_OUTPUT_LABEL (FILE, NAME); \
+#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
+do { \
+ ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "function"); \
+ ASM_OUTPUT_LABEL (FILE, NAME); \
} while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM any text necessary for declaring the name NAME of a
- function which is being defined. This macro is responsible for
- outputting the label definition (perhaps using
- `ASM_OUTPUT_LABEL'). The argument DECL is the `FUNCTION_DECL'
- tree node representing the function.
-
- If this macro is not defined, then the function name is defined in
- the usual manner as a label (by means of `ASM_OUTPUT_LABEL'). */
#define ASM_DECLARE_FUNCTION_SIZE(FILE, FNAME, DECL) \
do { \
if (!flag_inhibit_size_directive) \
- { \
- char label[256]; \
- static int labelno; \
- labelno++; \
- ASM_GENERATE_INTERNAL_LABEL (label, "Lfe", labelno); \
- ASM_OUTPUT_INTERNAL_LABEL (FILE, "Lfe", labelno); \
- fprintf (FILE, "%s", SIZE_ASM_OP); \
- assemble_name (FILE, (FNAME)); \
- fprintf (FILE, ","); \
- assemble_name (FILE, label); \
- fprintf (FILE, "-"); \
- assemble_name (FILE, (FNAME)); \
- putc ('\n', FILE); \
- } \
+ ASM_OUTPUT_MEASURED_SIZE (FILE, FNAME); \
} while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM any text necessary for declaring the size of a function
- which is being defined. The argument NAME is the name of the
- function. The argument DECL is the `FUNCTION_DECL' tree node
- representing the function.
-
- If this macro is not defined, then the function size is not
- defined. */
-
-#define ASM_DECLARE_OBJECT_NAME(FILE, NAME, DECL) \
-do { \
- fprintf (FILE, "%s", TYPE_ASM_OP); \
- assemble_name (FILE, NAME); \
- putc (',', FILE); \
- fprintf (FILE, TYPE_OPERAND_FMT, "object"); \
- putc ('\n', FILE); \
- size_directive_output = 0; \
- if (!flag_inhibit_size_directive && DECL_SIZE (DECL)) \
- { \
- size_directive_output = 1; \
- fprintf (FILE, "%s", SIZE_ASM_OP); \
- assemble_name (FILE, NAME); \
- fprintf (FILE, ",%d\n", int_size_in_bytes (TREE_TYPE (DECL))); \
- } \
- ASM_OUTPUT_LABEL(FILE, NAME); \
-} while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM any text necessary for declaring the name NAME of an
- initialized variable which is being defined. This macro must
- output the label definition (perhaps using `ASM_OUTPUT_LABEL').
- The argument DECL is the `VAR_DECL' tree node representing the
- variable.
- If this macro is not defined, then the variable name is defined in
- the usual manner as a label (by means of `ASM_OUTPUT_LABEL'). */
+#define ASM_DECLARE_OBJECT_NAME(FILE, NAME, DECL) \
+do { \
+ ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object"); \
+ size_directive_output = 0; \
+ if (!flag_inhibit_size_directive && DECL_SIZE (DECL)) \
+ { \
+ size_directive_output = 1; \
+ ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, \
+ int_size_in_bytes (TREE_TYPE (DECL))); \
+ } \
+ ASM_OUTPUT_LABEL(FILE, NAME); \
+} while (0)
+#undef ASM_FINISH_DECLARE_OBJECT
#define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP_LEVEL, AT_END) \
do { \
const char *name = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
+ HOST_WIDE_INT size; \
if (!flag_inhibit_size_directive && DECL_SIZE (DECL) \
&& ! AT_END && TOP_LEVEL \
&& DECL_INITIAL (DECL) == error_mark_node \
&& !size_directive_output) \
{ \
size_directive_output = 1; \
- fprintf (FILE, "%s", SIZE_ASM_OP); \
- assemble_name (FILE, name); \
- fprintf (FILE, ",%d\n", int_size_in_bytes (TREE_TYPE (DECL))); \
+ size = int_size_in_bytes (TREE_TYPE (DECL)); \
+ ASM_OUTPUT_SIZE_DIRECTIVE (FILE, name, size); \
} \
} while (0)
-/* A C statement (sans semicolon) to finish up declaring a variable
- name once the compiler has processed its initializer fully and
- thus has had a chance to determine the size of an array when
- controlled by an initializer. This is used on systems where it's
- necessary to declare something about the size of the object.
-
- If you don't define this macro, that is equivalent to defining it
- to do nothing. */
#define ESCAPES \
If your target assembler doesn't support the .string directive, you
should define this to zero. */
-#define ASM_GLOBALIZE_LABEL(STREAM, NAME) \
-do { \
- fprintf (STREAM, ".global\t"); \
- assemble_name (STREAM, NAME); \
- fprintf (STREAM, "\n"); \
-} \
-while (0)
-
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM some commands that will make the label NAME global; that
- is, available for reference from other files. Use the expression
- `assemble_name (STREAM, NAME)' to output the name itself; before
- and after that, output the additional assembler syntax for making
- that name global, and a newline. */
-
-#define ASM_WEAKEN_LABEL(FILE, NAME) \
+/* Globalizing directive for a label. */
+#define GLOBAL_ASM_OP ".global\t"
+
+#define SET_ASM_OP "\t.set\t"
+
+#define ASM_WEAKEN_LABEL(FILE, NAME) \
do \
{ \
fputs ("\t.weak\t", (FILE)); \
- assemble_name ((FILE), (NAME)); \
+ assemble_name ((FILE), (NAME)); \
fputc ('\n', (FILE)); \
} \
while (0)
-/* A C statement (sans semicolon) to output to the stdio stream
- STREAM some commands that will make the label NAME weak; that is,
- available for reference from other files but only used if no other
- definition is available. Use the expression `assemble_name
- (STREAM, NAME)' to output the name itself; before and after that,
- output the additional assembler syntax for making that name weak,
- and a newline.
-
- If you don't define this macro, GNU CC will not support weak
- symbols and you should not define the `SUPPORTS_WEAK' macro.
-*/
-
#define SUPPORTS_WEAK 1
-/* A C expression which evaluates to true if the target supports weak
- symbols.
-
- If you don't define this macro, `defaults.h' provides a default
- definition. If `ASM_WEAKEN_LABEL' is defined, the default
- definition is `1'; otherwise, it is `0'. Define this macro if you
- want to control weak symbol support with a compiler flag such as
- `-melf'.
-
- `MAKE_DECL_ONE_ONLY'
- A C statement (sans semicolon) to mark DECL to be emitted as a
- public symbol such that extra copies in multiple translation units
- will be discarded by the linker. Define this macro if your object
- file format provides support for this concept, such as the `COMDAT'
- section flags in the Microsoft Windows PE/COFF format, and this
- support requires changes to DECL, such as putting it in a separate
- section.
-
- `SUPPORTS_WEAK'
- A C expression which evaluates to true if the target supports
- one-only semantics.
-
- If you don't define this macro, `varasm.c' provides a default
- definition. If `MAKE_DECL_ONE_ONLY' is defined, the default
- definition is `1'; otherwise, it is `0'. Define this macro if you
- want to control weak symbol support with a compiler flag, or if
- setting the `DECL_ONE_ONLY' flag is enough to mark a declaration to
- be emitted as one-only. */
-
-#define ASM_OUTPUT_INTERNAL_LABEL(STREAM, PREFIX, NUM) \
-fprintf(STREAM, ".%s%d:\n", PREFIX, NUM)
-/* A C statement to output to the stdio stream STREAM a label whose
- name is made from the string PREFIX and the number NUM.
-
- It is absolutely essential that these labels be distinct from the
- labels used for user-level functions and variables. Otherwise,
- certain programs will have name conflicts with internal labels.
-
- It is desirable to exclude internal labels from the symbol table
- of the object file. Most assemblers have a naming convention for
- labels that should be excluded; on many systems, the letter `L' at
- the beginning of a label has this effect. You should find out what
- convention your system uses, and follow it.
-
- The usual definition of this macro is as follows:
-
- fprintf (STREAM, "L%s%d:\n", PREFIX, NUM) */
#define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM) \
-sprintf (STRING, "*.%s%d", PREFIX, NUM)
-/* A C statement to store into the string STRING a label whose name
- is made from the string PREFIX and the number NUM.
-
- This string, when output subsequently by `assemble_name', should
- produce the output that `ASM_OUTPUT_INTERNAL_LABEL' would produce
- with the same PREFIX and NUM.
-
- If the string begins with `*', then `assemble_name' will output
- the rest of the string unchanged. It is often convenient for
- `ASM_GENERATE_INTERNAL_LABEL' to use `*' in this way. If the
- string doesn't start with `*', then `ASM_OUTPUT_LABELREF' gets to
- output the string, and may change it. (Of course,
- `ASM_OUTPUT_LABELREF' is also part of your machine description, so
- you should know what it does on your machine.) */
-
-#define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
-( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
- sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
-
-/* A C expression to assign to OUTVAR (which is a variable of type
- `char *') a newly allocated string made from the string NAME and
- the number NUMBER, with some suitable punctuation added. Use
- `alloca' to get space for the string.
-
- The string will be used as an argument to `ASM_OUTPUT_LABELREF' to
- produce an assembler label for an internal static variable whose
- name is NAME. Therefore, the string must be such as to result in
- valid assembler code. The argument NUMBER is different each time
- this macro is executed; it prevents conflicts between
- similarly-named internal static variables in different scopes.
-
- Ideally this string should not be a valid C identifier, to prevent
- any conflict with the user's own symbols. Most assemblers allow
- periods or percent signs in assembler symbols; putting at least
- one of these between the name and the number will suffice. */
-
-/* `ASM_OUTPUT_WEAK_ALIAS (STREAM, NAME, VALUE)'
- A C statement to output to the stdio stream STREAM assembler code
- which defines (equates) the weak symbol NAME to have the value
- VALUE.
-
- Define this macro if the target only supports weak aliases; define
- ASM_OUTPUT_DEF instead if possible. */
+sprintf (STRING, "*.%s%lu", PREFIX, (unsigned long)(NUM))
#define HAS_INIT_SECTION 1
-/* If defined, `main' will not call `__main' as described above.
- This macro should be defined for systems that control the contents
- of the init section on a symbol-by-symbol basis, such as OSF/1,
- and should not be defined explicitly for systems that support
- `INIT_SECTION_ASM_OP'. */
#define REGISTER_NAMES { \
"r0","r1","r2","r3","r4","r5","r6","r7", \
"r16","r17","r18","r19","r20","r21","r22","r23", \
"r24","r25","r26","r27","r28","r29","r30","r31", \
"__SPL__","__SPH__","argL","argH"}
-/* A C initializer containing the assembler's names for the machine
- registers, each one as a C string constant. This is what
- translates register numbers in the compiler into assembler
- language. */
#define FINAL_PRESCAN_INSN(insn, operand, nop) final_prescan_insn (insn, operand,nop)
-/* If defined, a C statement to be executed just prior to the output
- of assembler code for INSN, to modify the extracted operands so
- they will be output differently.
-
- Here the argument OPVEC is the vector containing the operands
- extracted from INSN, and NOPERANDS is the number of elements of
- the vector which contain meaningful data for this insn. The
- contents of this vector are what will be used to convert the insn
- template into assembler code, so you can change the assembler
- output by changing the contents of the vector.
-
- This macro is useful when various assembler syntaxes share a single
- file of instruction patterns; by defining this macro differently,
- you can cause a large class of instructions to be output
- differently (such as with rearranged operands). Naturally,
- variations in assembler syntax affecting individual insn patterns
- ought to be handled by writing conditional output routines in
- those patterns.
-
- If this macro is not defined, it is equivalent to a null statement. */
#define PRINT_OPERAND(STREAM, X, CODE) print_operand (STREAM, X, CODE)
-/* A C compound statement to output to stdio stream STREAM the
- assembler syntax for an instruction operand X. X is an RTL
- expression.
-
- CODE is a value that can be used to specify one of several ways of
- printing the operand. It is used when identical operands must be
- printed differently depending on the context. CODE comes from the
- `%' specification that was used to request printing of the
- operand. If the specification was just `%DIGIT' then CODE is 0;
- if the specification was `%LTR DIGIT' then CODE is the ASCII code
- for LTR.
-
- If X is a register, this macro should print the register's name.
- The names can be found in an array `reg_names' whose type is `char
- *[]'. `reg_names' is initialized from `REGISTER_NAMES'.
-
- When the machine description has a specification `%PUNCT' (a `%'
- followed by a punctuation character), this macro is called with a
- null pointer for X and the punctuation character for CODE. */
#define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == '~')
-/* A C expression which evaluates to true if CODE is a valid
- punctuation character for use in the `PRINT_OPERAND' macro. If
- `PRINT_OPERAND_PUNCT_VALID_P' is not defined, it means that no
- punctuation characters (except for the standard one, `%') are used
- in this way. */
#define PRINT_OPERAND_ADDRESS(STREAM, X) print_operand_address(STREAM, X)
-/* A C compound statement to output to stdio stream STREAM the
- assembler syntax for an instruction operand that is a memory
- reference whose address is X. X is an RTL expression.
-
- On some machines, the syntax for a symbolic address depends on the
- section that the address refers to. On these machines, define the
- macro `ENCODE_SECTION_INFO' to store the information into the
- `symbol_ref', and then check for it here. *Note Assembler
- Format::. */
#define USER_LABEL_PREFIX ""
-/* `LOCAL_LABEL_PREFIX'
- `REGISTER_PREFIX'
- `IMMEDIATE_PREFIX'
- If defined, C string expressions to be used for the `%R', `%L',
- `%U', and `%I' options of `asm_fprintf' (see `final.c'). These
- are useful when a single `md' file must support multiple assembler
- formats. In that case, the various `tm.h' files can define these
- macros differently. */
#define ASSEMBLER_DIALECT AVR_ENHANCED
-/* If your target supports multiple dialects of assembler language
- (such as different opcodes), define this macro as a C expression
- that gives the numeric index of the assembler language dialect to
- use, with zero as the first variant.
-
- If this macro is defined, you may use constructs of the form
- `{option0|option1|option2...}' in the output templates of patterns
- (*note Output Template::.) or in the first argument of
- `asm_fprintf'. This construct outputs `option0', `option1' or
- `option2', etc., if the value of `ASSEMBLER_DIALECT' is zero, one
- or two, etc. Any special characters within these strings retain
- their usual meaning.
-
- If you do not define this macro, the characters `{', `|' and `}'
- do not have any special meaning when used in templates or operands
- to `asm_fprintf'.
-
- Define the macros `REGISTER_PREFIX', `LOCAL_LABEL_PREFIX',
- `USER_LABEL_PREFIX' and `IMMEDIATE_PREFIX' if you can express the
- variations in assembler language syntax with that mechanism.
- Define `ASSEMBLER_DIALECT' and use the `{option0|option1}' syntax
- if the syntax variant are larger and involve such things as
- different opcodes or operand order. */
#define ASM_OUTPUT_REG_PUSH(STREAM, REGNO) \
{ \
- if (REGNO > 31) \
- abort (); \
+ gcc_assert (REGNO < 32); \
fprintf (STREAM, "\tpush\tr%d", REGNO); \
}
-/* A C expression to output to STREAM some assembler code which will
- push hard register number REGNO onto the stack. The code need not
- be optimal, since this macro is used only when profiling. */
#define ASM_OUTPUT_REG_POP(STREAM, REGNO) \
{ \
- if (REGNO > 31) \
- abort (); \
+ gcc_assert (REGNO < 32); \
fprintf (STREAM, "\tpop\tr%d", REGNO); \
}
-/* A C expression to output to STREAM some assembler code which will
- pop hard register number REGNO off of the stack. The code need
- not be optimal, since this macro is used only when profiling. */
#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
avr_output_addr_vec_elt(STREAM, VALUE)
-/* This macro should be provided on machines where the addresses in a
- dispatch table are absolute.
-
- The definition should be a C statement to output to the stdio
- stream STREAM an assembler pseudo-instruction to generate a
- reference to a label. VALUE is the number of an internal label
- whose definition is output using `ASM_OUTPUT_INTERNAL_LABEL'. For
- example,
-
- fprintf (STREAM, "\t.word L%d\n", VALUE) */
#define ASM_OUTPUT_CASE_LABEL(STREAM, PREFIX, NUM, TABLE) \
- progmem_section (), ASM_OUTPUT_INTERNAL_LABEL (STREAM, PREFIX, NUM)
-
-/* `ASM_OUTPUT_CASE_LABEL (STREAM, PREFIX, NUM, TABLE)'
- Define this if the label before a jump-table needs to be output
- specially. The first three arguments are the same as for
- `ASM_OUTPUT_INTERNAL_LABEL'; the fourth argument is the jump-table
- which follows (a `jump_insn' containing an `addr_vec' or
- `addr_diff_vec').
-
- This feature is used on system V to output a `swbeg' statement for
- the table.
-
- If this macro is not defined, these labels are output with
- `ASM_OUTPUT_INTERNAL_LABEL'. */
-
-/* `ASM_OUTPUT_CASE_END (STREAM, NUM, TABLE)'
- Define this if something special must be output at the end of a
- jump-table. The definition should be a C statement to be executed
- after the assembler code for the table is written. It should write
- the appropriate code to stdio stream STREAM. The argument TABLE
- is the jump-table insn, and NUM is the label-number of the
- preceding label.
-
- If this macro is not defined, nothing special is output at the end
- of the jump-table. */
+ (switch_to_section (progmem_section), \
+ (*targetm.asm_out.internal_label) (STREAM, PREFIX, NUM))
#define ASM_OUTPUT_SKIP(STREAM, N) \
-fprintf (STREAM, "\t.skip %d,0\n", N)
-/* A C statement to output to the stdio stream STREAM an assembler
- instruction to advance the location counter by NBYTES bytes.
- Those bytes should be zero when loaded. NBYTES will be a C
- expression of type `int'. */
+fprintf (STREAM, "\t.skip %lu,0\n", (unsigned long)(N))
#define ASM_OUTPUT_ALIGN(STREAM, POWER)
-/* A C statement to output to the stdio stream STREAM an assembler
- command to advance the location counter to a multiple of 2 to the
- POWER bytes. POWER will be a C expression of type `int'. */
#define CASE_VECTOR_MODE HImode
-/* An alias for a machine mode name. This is the machine mode that
- elements of a jump-table should have. */
extern int avr_case_values_threshold;
#define CASE_VALUES_THRESHOLD avr_case_values_threshold
-/* `CASE_VALUES_THRESHOLD'
- Define this to be the smallest number of different values for
- which it is best to use a jump-table instead of a tree of
- conditional branches. The default is four for machines with a
- `casesi' instruction and five otherwise. This is best for most
- machines. */
#undef WORD_REGISTER_OPERATIONS
-/* Define this macro if operations between registers with integral
- mode smaller than a word are always performed on the entire
- register. Most RISC machines have this property and most CISC
- machines do not. */
-
-#define EASY_DIV_EXPR TRUNC_DIV_EXPR
-/* An alias for a tree code that is the easiest kind of division to
- compile code for in the general case. It may be `TRUNC_DIV_EXPR',
- `FLOOR_DIV_EXPR', `CEIL_DIV_EXPR' or `ROUND_DIV_EXPR'. These four
- division operators differ in how they round the result to an
- integer. `EASY_DIV_EXPR' is used when it is permissible to use
- any of those kinds of division and the choice should be made on
- the basis of efficiency. */
#define MOVE_MAX 4
-/* The maximum number of bytes that a single instruction can move
- quickly between memory and registers or between two memory
- locations. */
#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
-/* A C expression which is nonzero if on this machine it is safe to
- "convert" an integer of INPREC bits to one of OUTPREC bits (where
- OUTPREC is smaller than INPREC) by merely operating on it as if it
- had only OUTPREC bits.
-
- On many machines, this expression can be 1.
-
- When `TRULY_NOOP_TRUNCATION' returns 1 for a pair of sizes for
- modes for which `MODES_TIEABLE_P' is 0, suboptimal code can result.
- If this is the case, making `TRULY_NOOP_TRUNCATION' return 0 in
- such cases may improve things. */
#define Pmode HImode
-/* An alias for the machine mode for pointers. On most machines,
- define this to be the integer mode corresponding to the width of a
- hardware pointer; `SImode' on 32-bit machine or `DImode' on 64-bit
- machines. On some machines you must define this to be one of the
- partial integer modes, such as `PSImode'.
-
- The width of `Pmode' must be at least as large as the value of
- `POINTER_SIZE'. If it is not equal, you must define the macro
- `POINTERS_EXTEND_UNSIGNED' to specify how pointers are extended to
- `Pmode'. */
#define FUNCTION_MODE HImode
-/* An alias for the machine mode used for memory references to
- functions being called, in `call' RTL expressions. On most
- machines this should be `QImode'. */
- /* 1 3 */
-#define INTEGRATE_THRESHOLD(DECL) (1 + (3 * list_length (DECL_ARGUMENTS (DECL)) / 2))
-
-/* A C expression for the maximum number of instructions above which
- the function DECL should not be inlined. DECL is a
- `FUNCTION_DECL' node.
-
- The default definition of this macro is 64 plus 8 times the number
- of arguments that the function accepts. Some people think a larger
- threshold should be used on RISC machines. */
#define DOLLARS_IN_IDENTIFIERS 0
-/* Define this macro to control use of the character `$' in identifier
- names. 0 means `$' is not allowed by default; 1 means it is
- allowed. 1 is the default; there is no need to define this macro
- in that case. This macro controls the compiler proper; it does
- not affect the preprocessor. */
#define NO_DOLLAR_IN_LABEL 1
-/* Define this macro if the assembler does not accept the character
- `$' in label names. By default constructors and destructors in
- G++ have `$' in the identifiers. If this macro is defined, `.' is
- used instead. */
-
-#define MACHINE_DEPENDENT_REORG(INSN) machine_dependent_reorg (INSN)
-/* In rare cases, correct code generation requires extra machine
- dependent processing between the second jump optimization pass and
- delayed branch scheduling. On those machines, define this macro
- as a C statement to act on the code starting at INSN. */
-
-#define GIV_SORT_CRITERION(X, Y) \
- if (GET_CODE ((X)->add_val) == CONST_INT \
- && GET_CODE ((Y)->add_val) == CONST_INT) \
- return INTVAL ((X)->add_val) - INTVAL ((Y)->add_val);
-
-/* `GIV_SORT_CRITERION(GIV1, GIV2)'
- In some cases, the strength reduction optimization pass can
- produce better code if this is defined. This macro controls the
- order that induction variables are combined. This macro is
- particularly useful if the target has limited addressing modes.
- For instance, the SH target has only positive offsets in
- addresses. Thus sorting to put the smallest address first allows
- the most combinations to be found. */
#define TRAMPOLINE_TEMPLATE(FILE) \
internal_error ("trampolines not supported")
-/* Length in units of the trampoline for entering a nested function. */
-
#define TRAMPOLINE_SIZE 4
-/* Emit RTL insns to initialize the variable parts of a trampoline.
- FNADDR is an RTX for the address of the function's pure code.
- CXT is an RTX for the static chain value for the function. */
-
#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
{ \
- emit_move_insn (gen_rtx (MEM, HImode, plus_constant ((TRAMP), 2)), CXT); \
- emit_move_insn (gen_rtx (MEM, HImode, plus_constant ((TRAMP), 6)), FNADDR); \
+ emit_move_insn (gen_rtx_MEM (HImode, plus_constant ((TRAMP), 2)), CXT); \
+ emit_move_insn (gen_rtx_MEM (HImode, plus_constant ((TRAMP), 6)), FNADDR); \
}
/* Store in cc_status the expressions
that the condition codes will describe
#define FUNCTION_PROFILER(FILE, LABELNO) \
fprintf (FILE, "/* profiler %d */", (LABELNO))
-/* `FIRST_INSN_ADDRESS'
- When the `length' insn attribute is used, this macro specifies the
- value to be assigned to the address of the first insn in a
- function. If not specified, 0 is used. */
-
#define ADJUST_INSN_LENGTH(INSN, LENGTH) (LENGTH =\
adjust_insn_length (INSN, LENGTH))
-/* If defined, modifies the length assigned to instruction INSN as a
- function of the context in which it is used. LENGTH is an lvalue
- that contains the initially computed length of the insn and should
- be updated with the correct length of the insn. If updating is
- required, INSN must not be a varying-length insn.
-
- This macro will normally not be required. A case in which it is
- required is the ROMP. On this machine, the size of an `addr_vec'
- insn must be increased by two to compensate for the fact that
- alignment may be required. */
-
-#define TARGET_MEM_FUNCTIONS
-/* Define this macro if GNU CC should generate calls to the System V
- (and ANSI C) library functions `memcpy' and `memset' rather than
- the BSD functions `bcopy' and `bzero'. */
-
-#define CPP_SPEC "\
-%{!mmcu*|mmcu=avr2:%(cpp_avr2)} \
-%{mmcu=at90s2313:%(cpp_avr2) -D__AVR_AT90S2313__} \
-%{mmcu=at90s2323:%(cpp_avr2) -D__AVR_AT90S2323__} \
-%{mmcu=at90s2333:%(cpp_avr2) -D__AVR_AT90S2333__} \
-%{mmcu=at90s2343:%(cpp_avr2) -D__AVR_AT90S2343__} \
-%{mmcu=attiny22: %(cpp_avr2) -D__AVR_ATtiny22__} \
-%{mmcu=at90s4433:%(cpp_avr2) -D__AVR_AT90S4433__} \
-%{mmcu=at90s4414:%(cpp_avr2) -D__AVR_AT90S4414__} \
-%{mmcu=at90s4434:%(cpp_avr2) -D__AVR_AT90S4434__} \
-%{mmcu=at90s8515:%(cpp_avr2) -D__AVR_AT90S8515__} \
-%{mmcu=at90s8535:%(cpp_avr2) -D__AVR_AT90S8535__} \
-%{mmcu=at90c8534:%(cpp_avr2) -D__AVR_AT90C8534__} \
-%{mmcu=avr3:%(cpp_avr3)} \
-%{mmcu=atmega603:%(cpp_avr3) -D__AVR_ATmega603__} \
-%{mmcu=atmega103:%(cpp_avr3) -D__AVR_ATmega103__} \
-%{mmcu=avr4:%(cpp_avr4)} \
-%{mmcu=atmega83: %(cpp_avr4) -D__AVR_ATmega83__} \
-%{mmcu=atmega85: %(cpp_avr4) -D__AVR_ATmega85__} \
-%{mmcu=avr5:%(cpp_avr5)} \
-%{mmcu=atmega161:%(cpp_avr5) -D__AVR_ATmega161__} \
-%{mmcu=atmega163:%(cpp_avr5) -D__AVR_ATmega163__} \
-%{mmcu=atmega32: %(cpp_avr5) -D__AVR_ATmega32__} \
-%{mmcu=at94k: %(cpp_avr5) -D__AVR_AT94K__} \
-%{mmcu=avr1:%(cpp_avr1)} \
-%{mmcu=at90s1200:%(cpp_avr1) -D__AVR_AT90S1200__} \
-%{mmcu=attiny10|mmcu=attiny11: %(cpp_avr1) -D__AVR_ATtiny11__} \
-%{mmcu=attiny12: %(cpp_avr1) -D__AVR_ATtiny12__} \
-%{mmcu=attiny15: %(cpp_avr1) -D__AVR_ATtiny15__} \
-%{mmcu=attiny28: %(cpp_avr1) -D__AVR_ATtiny28__} \
-%{mno-interrupts:-D__NO_INTERRUPTS__} \
-%{mint8:-D__SIZE_TYPE__=long\\ unsigned\\ int -D__PTRDIFF_TYPE__=long -D__INT_MAX__=127} \
-%{!mint*:-D__SIZE_TYPE__=unsigned\\ int -D__PTRDIFF_TYPE__=int -D__INT_MAX__=32767} \
-%{posix:-D_POSIX_SOURCE}"
-/* A C string constant that tells the GNU CC driver program options to
- pass to CPP. It can also specify how to translate options you
- give to GNU CC into options for GNU CC to pass to the CPP.
-
- Do not define this macro if it does not need to do anything. */
-
-#define NO_BUILTIN_SIZE_TYPE
-/* If this macro is defined, the preprocessor will not define the
- builtin macro `__SIZE_TYPE__'. The macro `__SIZE_TYPE__' must
- then be defined by `CPP_SPEC' instead.
-
- This should be defined if `SIZE_TYPE' depends on target dependent
- flags which are not accessible to the preprocessor. Otherwise, it
- should not be defined. */
-
-#define NO_BUILTIN_PTRDIFF_TYPE
-/* If this macro is defined, the preprocessor will not define the
- builtin macro `__PTRDIFF_TYPE__'. The macro `__PTRDIFF_TYPE__'
- must then be defined by `CPP_SPEC' instead.
-
- This should be defined if `PTRDIFF_TYPE' depends on target
- dependent flags which are not accessible to the preprocessor.
- Otherwise, it should not be defined.
-
- `SIGNED_CHAR_SPEC'
- A C string constant that tells the GNU CC driver program options to
- pass to CPP. By default, this macro is defined to pass the option
- `-D__CHAR_UNSIGNED__' to CPP if `char' will be treated as
- `unsigned char' by `cc1'.
-
- Do not define this macro unless you need to override the default
- definition. */
+
+#define CPP_SPEC "%{posix:-D_POSIX_SOURCE}"
#define CC1_SPEC "%{profile:-p}"
-/* A C string constant that tells the GNU CC driver program options to
- pass to `cc1'. It can also specify how to translate options you
- give to GNU CC into options for GNU CC to pass to the `cc1'.
- Do not define this macro if it does not need to do anything. */
+#define CC1PLUS_SPEC "%{!frtti:-fno-rtti} \
+ %{!fenforce-eh-specs:-fno-enforce-eh-specs} \
+ %{!fexceptions:-fno-exceptions}"
+/* A C string constant that tells the GCC drvier program options to
+ pass to `cc1plus'. */
#define ASM_SPEC "%{mmcu=*:-mmcu=%*}"
-/* A C string constant that tells the GNU CC driver program options to
- pass to the assembler. It can also specify how to translate
- options you give to GNU CC into options for GNU CC to pass to the
- assembler. See the file `sun3.h' for an example of this.
-
- Do not define this macro if it does not need to do anything. */
-
-#define ASM_FINAL_SPEC ""
-/* A C string constant that tells the GNU CC driver program how to
- run any programs which cleanup after the normal assembler.
- Normally, this is not needed. See the file `mips.h' for an
- example of this.
-
- Do not define this macro if it does not need to do anything. */
-
-#define LINK_SPEC "\
-%{!mmcu*:-m avr85xx} \
-%{mmcu=atmega603:-m avrmega603} \
-%{mmcu=atmega103:-m avrmega103} \
-%{mmcu=atmega161:-m avrmega161} \
-%{mmcu=atmega163:-m avrmega161} \
-%{mmcu=atmega32:-m avr5} \
-%{mmcu=at94k:-m avr5} \
-%{mmcu=atmega83:-m avr4} \
-%{mmcu=atmega85:-m avr4} \
-%{mmcu=at90s1200|mmcu=attiny1*:-m avr1200} \
-%{mmcu=attiny28:-m avr1} \
-%{mmcu=at90s2313:-m avr23xx} \
-%{mmcu=at90s2323:-m avr23xx} \
-%{mmcu=attiny22:-m avr23xx} \
-%{mmcu=at90s2333:-m avr23xx} \
-%{mmcu=at90s2343:-m avr23xx} \
-%{mmcu=at90s4433:-m avr4433} \
-%{mmcu=at90s4414:-m avr44x4} \
-%{mmcu=at90s4434:-m avr44x4} \
-%{mmcu=at90c8534:-m avr85xx} \
-%{mmcu=at90s8535:-m avr85xx} \
-%{mmcu=at90s8515:-m avr85xx}"
-
-/* A C string constant that tells the GNU CC driver program options to
- pass to the linker. It can also specify how to translate options
- you give to GNU CC into options for GNU CC to pass to the linker.
-
- Do not define this macro if it does not need to do anything. */
+
+#define LINK_SPEC " %{!mmcu*:-m avr2}\
+%{mmcu=at90s1200|\
+ mmcu=attiny11|\
+ mmcu=attiny12|\
+ mmcu=attiny15|\
+ mmcu=attiny28:-m avr1}\
+%{mmcu=attiny22|\
+ mmcu=attiny26|\
+ mmcu=at90s2*|\
+ mmcu=at90s4*|\
+ mmcu=at90s8*|\
+ mmcu=at90c8*|\
+ mmcu=at86rf401|\
+ mmcu=attiny13|\
+ mmcu=attiny2313|\
+ mmcu=attiny24|\
+ mmcu=attiny25|\
+ mmcu=attiny261|\
+ mmcu=attiny4*|\
+ mmcu=attiny8*:-m avr2}\
+%{mmcu=atmega103|\
+ mmcu=atmega603|\
+ mmcu=at43*|\
+ mmcu=at76*:-m avr3}\
+%{mmcu=atmega8*|\
+ mmcu=atmega48|\
+ mmcu=at90pwm2|\
+ mmcu=at90pwm3:-m avr4}\
+%{mmcu=atmega16*|\
+ mmcu=atmega32*|\
+ mmcu=atmega406|\
+ mmcu=atmega64*|\
+ mmcu=atmega128*|\
+ mmcu=at90can*|\
+ mmcu=at90usb*|\
+ mmcu=at94k:-m avr5}\
+%{mmcu=atmega324*|\
+ mmcu=atmega325|\
+ mmcu=atmega3250|\
+ mmcu=atmega329|\
+ mmcu=atmega3290|\
+ mmcu=atmega406|\
+ mmcu=atmega48|\
+ mmcu=atmega88|\
+ mmcu=atmega64|\
+ mmcu=atmega644*|\
+ mmcu=atmega645|\
+ mmcu=atmega6450|\
+ mmcu=atmega649|\
+ mmcu=atmega6490|\
+ mmcu=atmega128|\
+ mmcu=atmega162|\
+ mmcu=atmega164*|\
+ mmcu=atmega165*|\
+ mmcu=atmega168|\
+ mmcu=atmega169*|\
+ mmcu=at90can*|\
+ mmcu=at90pwm*|\
+ mmcu=at90usb*: -Tdata 0x800100}\
+%{mmcu=atmega640|\
+ mmcu=atmega1280|\
+ mmcu=atmega1281: -Tdata 0x800200} "
#define LIB_SPEC \
- "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lc }}}"
-/* Another C string constant used much like `LINK_SPEC'. The
- difference between the two is that `LIB_SPEC' is used at the end
- of the command given to the linker.
+ "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}"
- If this macro is not defined, a default is provided that loads the
- standard C library from the usual place. See `gcc.c'. */
+#define LIBSTDCXX "-lgcc"
+/* No libstdc++ for now. Empty string doesn't work. */
#define LIBGCC_SPEC \
- "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lgcc }}}"
-/* Another C string constant that tells the GNU CC driver program how
- and when to place a reference to `libgcc.a' into the linker
- command line. This constant is placed both before and after the
- value of `LIB_SPEC'.
-
- If this macro is not defined, the GNU CC driver provides a default
- that passes the string `-lgcc' to the linker unless the `-shared'
- option is specified. */
+ "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}"
#define STARTFILE_SPEC "%(crt_binutils)"
-/* Another C string constant used much like `LINK_SPEC'. The
- difference between the two is that `STARTFILE_SPEC' is used at the
- very beginning of the command given to the linker.
-
- If this macro is not defined, a default is provided that loads the
- standard C startup file from the usual place. See `gcc.c'. */
#define ENDFILE_SPEC ""
-/* Another C string constant used much like `LINK_SPEC'. The
- difference between the two is that `ENDFILE_SPEC' is used at the
- very end of the command given to the linker.
-
- Do not define this macro if it does not need to do anything. */
#define CRT_BINUTILS_SPECS "\
%{mmcu=at90s1200|mmcu=avr1:crts1200.o%s} \
-%{mmcu=attiny10|mmcu=attiny11:crttn11.o%s} \
+%{mmcu=attiny11:crttn11.o%s} \
%{mmcu=attiny12:crttn12.o%s} \
%{mmcu=attiny15:crttn15.o%s} \
%{mmcu=attiny28:crttn28.o%s} \
%{!mmcu*|mmcu=at90s8515|mmcu=avr2:crts8515.o%s} \
%{mmcu=at90s2313:crts2313.o%s} \
%{mmcu=at90s2323:crts2323.o%s} \
-%{mmcu=attiny22:crttn22.o%s} \
%{mmcu=at90s2333:crts2333.o%s} \
%{mmcu=at90s2343:crts2343.o%s} \
+%{mmcu=attiny22:crttn22.o%s} \
+%{mmcu=attiny26:crttn26.o%s} \
%{mmcu=at90s4433:crts4433.o%s} \
%{mmcu=at90s4414:crts4414.o%s} \
%{mmcu=at90s4434:crts4434.o%s} \
%{mmcu=at90c8534:crtc8534.o%s} \
%{mmcu=at90s8535:crts8535.o%s} \
+%{mmcu=at86rf401:crt86401.o%s} \
+%{mmcu=attiny13:crttn13.o%s} \
+%{mmcu=attiny2313:crttn2313.o%s} \
+%{mmcu=attiny24:crttn24.o%s} \
+%{mmcu=attiny44:crttn44.o%s} \
+%{mmcu=attiny84:crttn84.o%s} \
+%{mmcu=attiny25:crttn25.o%s} \
+%{mmcu=attiny45:crttn45.o%s} \
+%{mmcu=attiny85:crttn85.o%s} \
+%{mmcu=attiny261:crttn261.o%s} \
+%{mmcu=attiny461:crttn461.o%s} \
+%{mmcu=attiny861:crttn861.o%s} \
%{mmcu=atmega103|mmcu=avr3:crtm103.o%s} \
%{mmcu=atmega603:crtm603.o%s} \
-%{mmcu=atmega83|mmcu=avr4:crtm83.o%s} \
-%{mmcu=atmega85:crtm85.o%s} \
+%{mmcu=at43usb320:crt43320.o%s} \
+%{mmcu=at43usb355:crt43355.o%s} \
+%{mmcu=at76c711:crt76711.o%s} \
+%{mmcu=atmega8|mmcu=avr4:crtm8.o%s} \
+%{mmcu=atmega48:crtm48.o%s} \
+%{mmcu=atmega88:crtm88.o%s} \
+%{mmcu=atmega8515:crtm8515.o%s} \
+%{mmcu=atmega8535:crtm8535.o%s} \
+%{mmcu=at90pwm2:crt90pwm2.o%s} \
+%{mmcu=at90pwm3:crt90pwm3.o%s} \
+%{mmcu=atmega16:crtm16.o%s} \
%{mmcu=atmega161|mmcu=avr5:crtm161.o%s} \
+%{mmcu=atmega162:crtm162.o%s} \
%{mmcu=atmega163:crtm163.o%s} \
+%{mmcu=atmega164p:crtm164p.o%s} \
+%{mmcu=atmega165:crtm165.o%s} \
+%{mmcu=atmega165p:crtm165p.o%s} \
+%{mmcu=atmega168:crtm168.o%s} \
+%{mmcu=atmega169:crtm169.o%s} \
+%{mmcu=atmega169p:crtm169p.o%s} \
%{mmcu=atmega32:crtm32.o%s} \
+%{mmcu=atmega323:crtm323.o%s} \
+%{mmcu=atmega324p:crtm324p.o%s} \
+%{mmcu=atmega325:crtm325.o%s} \
+%{mmcu=atmega3250:crtm3250.o%s} \
+%{mmcu=atmega329:crtm329.o%s} \
+%{mmcu=atmega3290:crtm3290.o%s} \
+%{mmcu=atmega406:crtm406.o%s} \
+%{mmcu=atmega64:crtm64.o%s} \
+%{mmcu=atmega640:crtm640.o%s} \
+%{mmcu=atmega644:crtm644.o%s} \
+%{mmcu=atmega644p:crtm644p.o%s} \
+%{mmcu=atmega645:crtm645.o%s} \
+%{mmcu=atmega6450:crtm6450.o%s} \
+%{mmcu=atmega649:crtm649.o%s} \
+%{mmcu=atmega6490:crtm6490.o%s} \
+%{mmcu=atmega128:crtm128.o%s} \
+%{mmcu=atmega1280:crtm1280.o%s} \
+%{mmcu=atmega1281:crtm1281.o%s} \
+%{mmcu=at90can32:crtcan32.o%s} \
+%{mmcu=at90can64:crtcan64.o%s} \
+%{mmcu=at90can128:crtcan128.o%s} \
+%{mmcu=at90usb646:crtusb646.o%s} \
+%{mmcu=at90usb647:crtusb647.o%s} \
+%{mmcu=at90usb1286:crtusb1286.o%s} \
+%{mmcu=at90usb1287:crtusb1287.o%s} \
%{mmcu=at94k:crtat94k.o%s}"
-#define CPP_AVR1_SPEC "-D__AVR_ARCH__=1 -D__AVR_ASM_ONLY__ "
-#define CPP_AVR2_SPEC "-D__AVR_ARCH__=2 "
-#define CPP_AVR3_SPEC "-D__AVR_ARCH__=3 -D__AVR_MEGA__ "
-#define CPP_AVR4_SPEC "-D__AVR_ARCH__=4 -D__AVR_ENHANCED__ "
-#define CPP_AVR5_SPEC "-D__AVR_ARCH__=5 -D__AVR_ENHANCED__ -D__AVR_MEGA__ "
-
-#define EXTRA_SPECS \
-{"cpp_avr1", CPP_AVR1_SPEC}, \
-{"cpp_avr2", CPP_AVR2_SPEC}, \
-{"cpp_avr3", CPP_AVR3_SPEC}, \
-{"cpp_avr4", CPP_AVR4_SPEC}, \
-{"cpp_avr5", CPP_AVR5_SPEC}, \
-{"crt_binutils", CRT_BINUTILS_SPECS},
-/* Define this macro to provide additional specifications to put in
- the `specs' file that can be used in various specifications like
- `CC1_SPEC'.
-
- The definition should be an initializer for an array of structures,
- containing a string constant, that defines the specification name,
- and a string constant that provides the specification.
-
- Do not define this macro if it does not need to do anything.
-
- `EXTRA_SPECS' is useful when an architecture contains several
- related targets, which have various `..._SPECS' which are similar
- to each other, and the maintainer would like one central place to
- keep these definitions.
-
- For example, the PowerPC System V.4 targets use `EXTRA_SPECS' to
- define either `_CALL_SYSV' when the System V calling sequence is
- used or `_CALL_AIX' when the older AIX-based calling sequence is
- used.
-
- The `config/rs6000/rs6000.h' target file defines:
-
- #define EXTRA_SPECS \
- { "cpp_sysv_default", CPP_SYSV_DEFAULT },
-
- #define CPP_SYS_DEFAULT ""
-
- The `config/rs6000/sysv.h' target file defines:
- #undef CPP_SPEC
- #define CPP_SPEC \
- "%{posix: -D_POSIX_SOURCE } \
- %{mcall-sysv: -D_CALL_SYSV } %{mcall-aix: -D_CALL_AIX } \
- %{!mcall-sysv: %{!mcall-aix: %(cpp_sysv_default) }} \
- %{msoft-float: -D_SOFT_FLOAT} %{mcpu=403: -D_SOFT_FLOAT}"
-
- #undef CPP_SYSV_DEFAULT
- #define CPP_SYSV_DEFAULT "-D_CALL_SYSV"
-
- while the `config/rs6000/eabiaix.h' target file defines
- `CPP_SYSV_DEFAULT' as:
-
- #undef CPP_SYSV_DEFAULT
- #define CPP_SYSV_DEFAULT "-D_CALL_AIX" */
+#define EXTRA_SPECS {"crt_binutils", CRT_BINUTILS_SPECS},
/* This is the default without any -mmcu=* option (AT90S*). */
#define MULTILIB_DEFAULTS { "mmcu=avr2" }
#define OUT_AS2(a,b,c) output_asm_insn (AS2(a,b,c), operands)
#define CR_TAB "\n\t"
-/* Define this macro as a C statement that declares additional library
- routines renames existing ones. `init_optabs' calls this macro
- after initializing all the normal library routines. */
-
-#define INIT_TARGET_OPTABS \
-{ \
- avr_init_once (); \
-}
-
-/* Temporary register r0 */
-#define TMP_REGNO 0
-
-/* zero register r1 */
-#define ZERO_REGNO 1
-
-/* Temporary register which used for load immediate values to r0-r15 */
-#define LDI_REG_REGNO 31
-
-extern struct rtx_def *tmp_reg_rtx;
-extern struct rtx_def *zero_reg_rtx;
-extern struct rtx_def *ldi_reg_rtx;
-
-#define TARGET_FLOAT_FORMAT IEEE_FLOAT_FORMAT
-
-/* Define to use software floating point emulator for REAL_ARITHMETIC and
- decimal <-> binary conversion. */
-#define REAL_ARITHMETIC
-
#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-
-/* Get the standard ELF stabs definitions. */
-#include "dbxelf.h"