/* Definitions of target machine for GNU compiler, for ARM.
Copyright (C) 1991, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
- 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
Contributed by Pieter `Tiggr' Schoenmakers (rcpieter@win.tue.nl)
and Martin Simmons (@harleqn.co.uk).
More major hacks by Richard Earnshaw (rearnsha@arm.com)
#ifndef GCC_ARM_H
#define GCC_ARM_H
+#include "config/vxworks-dummy.h"
+
/* The architecture define. */
extern char arm_arch_name[];
builtin_define ("__APCS_32__"); \
if (TARGET_THUMB) \
builtin_define ("__thumb__"); \
+ if (TARGET_THUMB2) \
+ builtin_define ("__thumb2__"); \
\
if (TARGET_BIG_END) \
{ \
#define TARGET_MAVERICK (arm_fp_model == ARM_FP_MODEL_MAVERICK)
#define TARGET_VFP (arm_fp_model == ARM_FP_MODEL_VFP)
#define TARGET_IWMMXT (arm_arch_iwmmxt)
-#define TARGET_REALLY_IWMMXT (TARGET_IWMMXT && TARGET_ARM)
-#define TARGET_IWMMXT_ABI (TARGET_ARM && arm_abi == ARM_ABI_IWMMXT)
+#define TARGET_REALLY_IWMMXT (TARGET_IWMMXT && TARGET_32BIT)
+#define TARGET_IWMMXT_ABI (TARGET_32BIT && arm_abi == ARM_ABI_IWMMXT)
#define TARGET_ARM (! TARGET_THUMB)
#define TARGET_EITHER 1 /* (TARGET_ARM | TARGET_THUMB) */
#define TARGET_BACKTRACE (leaf_function_p () \
#define TARGET_HARD_TP (target_thread_pointer == TP_CP15)
#define TARGET_SOFT_TP (target_thread_pointer == TP_SOFT)
+/* Only 16-bit thumb code. */
+#define TARGET_THUMB1 (TARGET_THUMB && !arm_arch_thumb2)
+/* Arm or Thumb-2 32-bit code. */
+#define TARGET_32BIT (TARGET_ARM || arm_arch_thumb2)
+/* 32-bit Thumb-2 code. */
+#define TARGET_THUMB2 (TARGET_THUMB && arm_arch_thumb2)
+
+/* FPU is VFPv3 (with twice the number of D registers). Setting the FPU to
+ Neon automatically enables VFPv3 too. */
+#define TARGET_VFP3 (arm_fp_model == ARM_FP_MODEL_VFP \
+ && (arm_fpu_arch == FPUTYPE_VFP3))
+
+/* "DSP" multiply instructions, eg. SMULxy. */
+#define TARGET_DSP_MULTIPLY \
+ (TARGET_32BIT && arm_arch5e && arm_arch_notm)
+/* Integer SIMD instructions, and extend-accumulate instructions. */
+#define TARGET_INT_SIMD \
+ (TARGET_32BIT && arm_arch6 && arm_arch_notm)
+
+/* We could use unified syntax for arm mode, but for now we just use it
+ for Thumb-2. */
+#define TARGET_UNIFIED_ASM TARGET_THUMB2
+
+
/* True iff the full BPABI is being used. If TARGET_BPABI is true,
then TARGET_AAPCS_BASED must be true -- but the converse does not
hold. TARGET_BPABI implies the use of the BPABI runtime library,
/* Cirrus Maverick floating point co-processor. */
FPUTYPE_MAVERICK,
/* VFP. */
- FPUTYPE_VFP
+ FPUTYPE_VFP,
+ /* VFPv3. */
+ FPUTYPE_VFP3
};
/* Recast the floating point class to be the floating point attribute. */
/* Nonzero if this chip supports the ARM Architecture 6 extensions. */
extern int arm_arch6;
+/* Nonzero if instructions not present in the 'M' profile can be used. */
+extern int arm_arch_notm;
+
/* Nonzero if this chip can benefit from load scheduling. */
extern int arm_ld_sched;
interworking clean. */
extern int arm_cpp_interwork;
+/* Nonzero if chip supports Thumb 2. */
+extern int arm_arch_thumb2;
+
+/* Nonzero if chip supports integer division instruction. */
+extern int arm_arch_hwdiv;
+
#ifndef TARGET_DEFAULT
#define TARGET_DEFAULT (MASK_APCS_FRAME)
#endif
#define CONSTANT_ALIGNMENT(EXP, ALIGN) \
((TREE_CODE (EXP) == STRING_CST \
+ && !optimize_size \
&& (ALIGN) < BITS_PER_WORD * CONSTANT_ALIGNMENT_FACTOR) \
? BITS_PER_WORD * CONSTANT_ALIGNMENT_FACTOR : (ALIGN))
1,1,1,1,1,1,1,1, \
1,1,1,1,1,1,1,1, \
1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
1 \
}
1,1,1,1,1,1,1,1, \
1,1,1,1,1,1,1,1, \
1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
+ 1,1,1,1,1,1,1,1, \
1 \
}
{ \
int regno; \
\
- if (TARGET_SOFT_FLOAT || TARGET_THUMB || !TARGET_FPA) \
+ if (TARGET_SOFT_FLOAT || TARGET_THUMB1 || !TARGET_FPA) \
{ \
for (regno = FIRST_FPA_REGNUM; \
regno <= LAST_FPA_REGNUM; ++regno) \
/* When optimizing for size, it's better not to use \
the HI regs, because of the overhead of stacking \
them. */ \
+ /* ??? Is this still true for thumb2? */ \
for (regno = FIRST_HI_REGNUM; \
regno <= LAST_HI_REGNUM; ++regno) \
fixed_regs[regno] = call_used_regs[regno] = 1; \
/* The link register can be clobbered by any branch insn, \
but we have no way to track that at present, so mark \
it as unavailable. */ \
- if (TARGET_THUMB) \
+ if (TARGET_THUMB1) \
fixed_regs[LR_REGNUM] = call_used_regs[LR_REGNUM] = 1; \
\
- if (TARGET_ARM && TARGET_HARD_FLOAT) \
+ if (TARGET_32BIT && TARGET_HARD_FLOAT) \
{ \
if (TARGET_MAVERICK) \
{ \
} \
if (TARGET_VFP) \
{ \
+ /* VFPv3 registers are disabled when earlier VFP \
+ versions are selected due to the definition of \
+ LAST_VFP_REGNUM. */ \
for (regno = FIRST_VFP_REGNUM; \
regno <= LAST_VFP_REGNUM; ++ regno) \
{ \
fixed_regs[regno] = 0; \
- call_used_regs[regno] = regno < FIRST_VFP_REGNUM + 16; \
+ call_used_regs[regno] = regno < FIRST_VFP_REGNUM + 16 \
+ || regno >= FIRST_VFP_REGNUM + 32; \
} \
} \
} \
/* The native (Norcroft) Pascal compiler for the ARM passes the static chain
as an invisible last argument (possible since varargs don't exist in
Pascal), so the following is not true. */
-#define STATIC_CHAIN_REGNUM (TARGET_ARM ? 12 : 9)
+#define STATIC_CHAIN_REGNUM 12
/* Define this to be where the real frame pointer is if it is not possible to
work out the offset between the frame pointer and the automatic variables
(((REGNUM) >= FIRST_CIRRUS_FP_REGNUM) && ((REGNUM) <= LAST_CIRRUS_FP_REGNUM))
#define FIRST_VFP_REGNUM 63
-#define LAST_VFP_REGNUM 94
+#define D7_VFP_REGNUM 78 /* Registers 77 and 78 == VFP reg D7. */
+#define LAST_VFP_REGNUM \
+ (TARGET_VFP3 ? LAST_HI_VFP_REGNUM : LAST_LO_VFP_REGNUM)
+
#define IS_VFP_REGNUM(REGNUM) \
(((REGNUM) >= FIRST_VFP_REGNUM) && ((REGNUM) <= LAST_VFP_REGNUM))
+/* VFP registers are split into two types: those defined by VFP versions < 3
+ have D registers overlaid on consecutive pairs of S registers. VFP version 3
+ defines 16 new D registers (d16-d31) which, for simplicity and correctness
+ in various parts of the backend, we implement as "fake" single-precision
+ registers (which would be S32-S63, but cannot be used in that way). The
+ following macros define these ranges of registers. */
+#define LAST_LO_VFP_REGNUM 94
+#define FIRST_HI_VFP_REGNUM 95
+#define LAST_HI_VFP_REGNUM 126
+
+#define VFP_REGNO_OK_FOR_SINGLE(REGNUM) \
+ ((REGNUM) <= LAST_LO_VFP_REGNUM)
+
+/* DFmode values are only valid in even register pairs. */
+#define VFP_REGNO_OK_FOR_DOUBLE(REGNUM) \
+ ((((REGNUM) - FIRST_VFP_REGNUM) & 1) == 0)
+
/* The number of hard registers is 16 ARM + 8 FPA + 1 CC + 1 SFP + 1 AFP. */
/* + 16 Cirrus registers take us up to 43. */
/* Intel Wireless MMX Technology registers add 16 + 4 more. */
-/* VFP adds 32 + 1 more. */
-#define FIRST_PSEUDO_REGISTER 96
+/* VFP (VFP3) adds 32 (64) + 1 more. */
+#define FIRST_PSEUDO_REGISTER 128
#define DBX_REGISTER_NUMBER(REGNO) arm_dbx_register_number (REGNO)
On the ARM regs are UNITS_PER_WORD bits wide; FPA regs can hold any FP
mode. */
#define HARD_REGNO_NREGS(REGNO, MODE) \
- ((TARGET_ARM \
+ ((TARGET_32BIT \
&& REGNO >= FIRST_FPA_REGNUM \
&& REGNO != FRAME_POINTER_REGNUM \
&& REGNO != ARG_POINTER_REGNUM) \
function parameters. It is quite good to use lr since other calls may
clobber it anyway. Allocate r0 through r3 in reverse order since r3 is
least likely to contain a function parameter; in addition results are
- returned in r0. */
-
-#define REG_ALLOC_ORDER \
-{ \
- 3, 2, 1, 0, 12, 14, 4, 5, \
- 6, 7, 8, 10, 9, 11, 13, 15, \
- 16, 17, 18, 19, 20, 21, 22, 23, \
- 27, 28, 29, 30, 31, 32, 33, 34, \
- 35, 36, 37, 38, 39, 40, 41, 42, \
- 43, 44, 45, 46, 47, 48, 49, 50, \
- 51, 52, 53, 54, 55, 56, 57, 58, \
- 59, 60, 61, 62, \
- 24, 25, 26, \
- 78, 77, 76, 75, 74, 73, 72, 71, \
- 70, 69, 68, 67, 66, 65, 64, 63, \
- 79, 80, 81, 82, 83, 84, 85, 86, \
- 87, 88, 89, 90, 91, 92, 93, 94, \
- 95 \
+ returned in r0.
+ For VFP/VFPv3, allocate D16-D31 first, then caller-saved registers (D0-D7),
+ then D8-D15. The reason for doing this is to attempt to reduce register
+ pressure when both single- and double-precision registers are used in a
+ function. */
+
+#define REG_ALLOC_ORDER \
+{ \
+ 3, 2, 1, 0, 12, 14, 4, 5, \
+ 6, 7, 8, 10, 9, 11, 13, 15, \
+ 16, 17, 18, 19, 20, 21, 22, 23, \
+ 27, 28, 29, 30, 31, 32, 33, 34, \
+ 35, 36, 37, 38, 39, 40, 41, 42, \
+ 43, 44, 45, 46, 47, 48, 49, 50, \
+ 51, 52, 53, 54, 55, 56, 57, 58, \
+ 59, 60, 61, 62, \
+ 24, 25, 26, \
+ 95, 96, 97, 98, 99, 100, 101, 102, \
+ 103, 104, 105, 106, 107, 108, 109, 110, \
+ 111, 112, 113, 114, 115, 116, 117, 118, \
+ 119, 120, 121, 122, 123, 124, 125, 126, \
+ 78, 77, 76, 75, 74, 73, 72, 71, \
+ 70, 69, 68, 67, 66, 65, 64, 63, \
+ 79, 80, 81, 82, 83, 84, 85, 86, \
+ 87, 88, 89, 90, 91, 92, 93, 94, \
+ 127 \
}
/* Interrupt functions can only use registers that have already been
call-clobbered. */
#define HARD_REGNO_RENAME_OK(SRC, DST) \
(! IS_INTERRUPT (cfun->machine->func_type) || \
- regs_ever_live[DST])
+ df_regs_ever_live_p (DST))
\f
/* Register and constant classes. */
NO_REGS,
FPA_REGS,
CIRRUS_REGS,
+ VFP_D0_D7_REGS,
+ VFP_LO_REGS,
+ VFP_HI_REGS,
VFP_REGS,
IWMMXT_GR_REGS,
IWMMXT_REGS,
"NO_REGS", \
"FPA_REGS", \
"CIRRUS_REGS", \
+ "VFP_D0_D7_REGS", \
+ "VFP_LO_REGS", \
+ "VFP_HI_REGS", \
"VFP_REGS", \
"IWMMXT_GR_REGS", \
"IWMMXT_REGS", \
/* Define which registers fit in which classes.
This is an initializer for a vector of HARD_REG_SET
of length N_REG_CLASSES. */
-#define REG_CLASS_CONTENTS \
-{ \
- { 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
- { 0x00FF0000, 0x00000000, 0x00000000 }, /* FPA_REGS */ \
- { 0xF8000000, 0x000007FF, 0x00000000 }, /* CIRRUS_REGS */ \
- { 0x00000000, 0x80000000, 0x7FFFFFFF }, /* VFP_REGS */ \
- { 0x00000000, 0x00007800, 0x00000000 }, /* IWMMXT_GR_REGS */ \
- { 0x00000000, 0x7FFF8000, 0x00000000 }, /* IWMMXT_REGS */ \
- { 0x000000FF, 0x00000000, 0x00000000 }, /* LO_REGS */ \
- { 0x00002000, 0x00000000, 0x00000000 }, /* STACK_REG */ \
- { 0x000020FF, 0x00000000, 0x00000000 }, /* BASE_REGS */ \
- { 0x0000FF00, 0x00000000, 0x00000000 }, /* HI_REGS */ \
- { 0x01000000, 0x00000000, 0x00000000 }, /* CC_REG */ \
- { 0x00000000, 0x00000000, 0x80000000 }, /* VFPCC_REG */ \
- { 0x0200FFFF, 0x00000000, 0x00000000 }, /* GENERAL_REGS */ \
- { 0xFAFFFFFF, 0xFFFFFFFF, 0x7FFFFFFF } /* ALL_REGS */ \
+#define REG_CLASS_CONTENTS \
+{ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
+ { 0x00FF0000, 0x00000000, 0x00000000, 0x00000000 }, /* FPA_REGS */ \
+ { 0xF8000000, 0x000007FF, 0x00000000, 0x00000000 }, /* CIRRUS_REGS */ \
+ { 0x00000000, 0x80000000, 0x00007FFF, 0x00000000 }, /* VFP_D0_D7_REGS */ \
+ { 0x00000000, 0x80000000, 0x7FFFFFFF, 0x00000000 }, /* VFP_LO_REGS */ \
+ { 0x00000000, 0x00000000, 0x80000000, 0x7FFFFFFF }, /* VFP_HI_REGS */ \
+ { 0x00000000, 0x80000000, 0xFFFFFFFF, 0x7FFFFFFF }, /* VFP_REGS */ \
+ { 0x00000000, 0x00007800, 0x00000000, 0x00000000 }, /* IWMMXT_GR_REGS */ \
+ { 0x00000000, 0x7FFF8000, 0x00000000, 0x00000000 }, /* IWMMXT_REGS */ \
+ { 0x000000FF, 0x00000000, 0x00000000, 0x00000000 }, /* LO_REGS */ \
+ { 0x00002000, 0x00000000, 0x00000000, 0x00000000 }, /* STACK_REG */ \
+ { 0x000020FF, 0x00000000, 0x00000000, 0x00000000 }, /* BASE_REGS */ \
+ { 0x0000FF00, 0x00000000, 0x00000000, 0x00000000 }, /* HI_REGS */ \
+ { 0x01000000, 0x00000000, 0x00000000, 0x00000000 }, /* CC_REG */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x80000000 }, /* VFPCC_REG */ \
+ { 0x0200FFFF, 0x00000000, 0x00000000, 0x00000000 }, /* GENERAL_REGS */ \
+ { 0xFAFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x7FFFFFFF } /* ALL_REGS */ \
}
+/* Any of the VFP register classes. */
+#define IS_VFP_CLASS(X) \
+ ((X) == VFP_D0_D7_REGS || (X) == VFP_LO_REGS \
+ || (X) == VFP_HI_REGS || (X) == VFP_REGS)
+
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
|| (CLASS) == CC_REG)
/* The class value for index registers, and the one for base regs. */
-#define INDEX_REG_CLASS (TARGET_THUMB ? LO_REGS : GENERAL_REGS)
-#define BASE_REG_CLASS (TARGET_THUMB ? LO_REGS : GENERAL_REGS)
+#define INDEX_REG_CLASS (TARGET_THUMB1 ? LO_REGS : GENERAL_REGS)
+#define BASE_REG_CLASS (TARGET_THUMB1 ? LO_REGS : GENERAL_REGS)
/* For the Thumb the high registers cannot be used as base registers
when addressing quantities in QI or HI mode; if we don't know the
mode, then we must be conservative. */
#define MODE_BASE_REG_CLASS(MODE) \
- (TARGET_ARM ? GENERAL_REGS : \
+ (TARGET_32BIT ? GENERAL_REGS : \
(((MODE) == SImode) ? BASE_REGS : LO_REGS))
/* For Thumb we can not support SP+reg addressing, so we return LO_REGS
registers explicitly used in the rtl to be used as spill registers
but prevents the compiler from extending the lifetime of these
registers. */
-#define SMALL_REGISTER_CLASSES TARGET_THUMB
+#define SMALL_REGISTER_CLASSES TARGET_THUMB1
/* Given an rtx X being reloaded into a reg required to be
in class CLASS, return the class of reg to actually use.
- In general this is just CLASS, but for the Thumb we prefer
- a LO_REGS class or a subset. */
-#define PREFERRED_RELOAD_CLASS(X, CLASS) \
- (TARGET_ARM ? (CLASS) : \
- ((CLASS) == BASE_REGS ? (CLASS) : LO_REGS))
+ In general this is just CLASS, but for the Thumb core registers and
+ immediate constants we prefer a LO_REGS class or a subset. */
+#define PREFERRED_RELOAD_CLASS(X, CLASS) \
+ (TARGET_ARM ? (CLASS) : \
+ ((CLASS) == GENERAL_REGS || (CLASS) == HI_REGS \
+ || (CLASS) == NO_REGS ? LO_REGS : (CLASS)))
/* Must leave BASE_REGS reloads alone */
#define THUMB_SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
or out of a register in CLASS in MODE. If it can be done directly,
NO_REGS is returned. */
#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
- /* Restrict which direct reloads are allowed for VFP regs. */ \
+ /* Restrict which direct reloads are allowed for VFP/iWMMXt regs. */ \
((TARGET_VFP && TARGET_HARD_FLOAT \
- && (CLASS) == VFP_REGS) \
- ? vfp_secondary_reload_class (MODE, X) \
- : TARGET_ARM \
+ && IS_VFP_CLASS (CLASS)) \
+ ? coproc_secondary_reload_class (MODE, X, FALSE) \
+ : (TARGET_IWMMXT && (CLASS) == IWMMXT_REGS) \
+ ? coproc_secondary_reload_class (MODE, X, TRUE) \
+ : TARGET_32BIT \
? (((MODE) == HImode && ! arm_arch4 && true_regnum (X) == -1) \
? GENERAL_REGS : NO_REGS) \
: THUMB_SECONDARY_OUTPUT_RELOAD_CLASS (CLASS, MODE, X))
/* If we need to load shorts byte-at-a-time, then we need a scratch. */
#define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
- /* Restrict which direct reloads are allowed for VFP regs. */ \
+ /* Restrict which direct reloads are allowed for VFP/iWMMXt regs. */ \
((TARGET_VFP && TARGET_HARD_FLOAT \
- && (CLASS) == VFP_REGS) \
- ? vfp_secondary_reload_class (MODE, X) : \
+ && IS_VFP_CLASS (CLASS)) \
+ ? coproc_secondary_reload_class (MODE, X, FALSE) : \
+ (TARGET_IWMMXT && (CLASS) == IWMMXT_REGS) ? \
+ coproc_secondary_reload_class (MODE, X, TRUE) : \
/* Cannot load constants into Cirrus registers. */ \
(TARGET_MAVERICK && TARGET_HARD_FLOAT \
&& (CLASS) == CIRRUS_REGS \
&& (CONSTANT_P (X) || GET_CODE (X) == SYMBOL_REF)) \
? GENERAL_REGS : \
- (TARGET_ARM ? \
+ (TARGET_32BIT ? \
(((CLASS) == IWMMXT_REGS || (CLASS) == IWMMXT_GR_REGS) \
&& CONSTANT_P (X)) \
? GENERAL_REGS : \
/* We could probably achieve better results by defining PROMOTE_MODE to help
cope with the variances between the Thumb's signed and unsigned byte and
halfword load instructions. */
+/* ??? This should be safe for thumb2, but we may be able to do better. */
#define THUMB_LEGITIMIZE_RELOAD_ADDRESS(X, MODE, OPNUM, TYPE, IND_L, WIN) \
do { \
rtx new_x = thumb_legitimize_reload_address (&X, MODE, OPNUM, TYPE, IND_L); \
/* Moves between FPA_REGS and GENERAL_REGS are two memory insns. */
#define REGISTER_MOVE_COST(MODE, FROM, TO) \
- (TARGET_ARM ? \
+ (TARGET_32BIT ? \
((FROM) == FPA_REGS && (TO) != FPA_REGS ? 20 : \
(FROM) != FPA_REGS && (TO) == FPA_REGS ? 20 : \
- (FROM) == VFP_REGS && (TO) != VFP_REGS ? 10 : \
- (FROM) != VFP_REGS && (TO) == VFP_REGS ? 10 : \
+ IS_VFP_CLASS (FROM) && !IS_VFP_CLASS (TO) ? 10 : \
+ !IS_VFP_CLASS (FROM) && IS_VFP_CLASS (TO) ? 10 : \
(FROM) == IWMMXT_REGS && (TO) != IWMMXT_REGS ? 4 : \
(FROM) != IWMMXT_REGS && (TO) == IWMMXT_REGS ? 4 : \
(FROM) == IWMMXT_GR_REGS || (TO) == IWMMXT_GR_REGS ? 20 : \
/* Define how to find the value returned by a library function
assuming the value has mode MODE. */
#define LIBCALL_VALUE(MODE) \
- (TARGET_ARM && TARGET_HARD_FLOAT_ABI && TARGET_FPA \
+ (TARGET_32BIT && TARGET_HARD_FLOAT_ABI && TARGET_FPA \
&& GET_MODE_CLASS (MODE) == MODE_FLOAT \
? gen_rtx_REG (MODE, FIRST_FPA_REGNUM) \
- : TARGET_ARM && TARGET_HARD_FLOAT_ABI && TARGET_MAVERICK \
+ : TARGET_32BIT && TARGET_HARD_FLOAT_ABI && TARGET_MAVERICK \
&& GET_MODE_CLASS (MODE) == MODE_FLOAT \
? gen_rtx_REG (MODE, FIRST_CIRRUS_FP_REGNUM) \
: TARGET_IWMMXT_ABI && arm_vector_mode_supported_p (MODE) \
/* On a Cirrus chip, mvf0 can return results. */
#define FUNCTION_VALUE_REGNO_P(REGNO) \
((REGNO) == ARG_REGISTER (1) \
- || (TARGET_ARM && ((REGNO) == FIRST_CIRRUS_FP_REGNUM) \
+ || (TARGET_32BIT && ((REGNO) == FIRST_CIRRUS_FP_REGNUM) \
&& TARGET_HARD_FLOAT_ABI && TARGET_MAVERICK) \
|| ((REGNO) == FIRST_IWMMXT_REGNUM && TARGET_IWMMXT_ABI) \
- || (TARGET_ARM && ((REGNO) == FIRST_FPA_REGNUM) \
+ || (TARGET_32BIT && ((REGNO) == FIRST_FPA_REGNUM) \
&& TARGET_HARD_FLOAT_ABI && TARGET_FPA))
/* Amount of memory needed for an untyped call to save all possible return
than a word, or if they contain elements offset from zero in the struct. */
#define DEFAULT_PCC_STRUCT_RETURN 0
-/* Flags for the call/call_value rtl operations set up by function_arg. */
-#define CALL_NORMAL 0x00000000 /* No special processing. */
-#define CALL_LONG 0x00000001 /* Always call indirect. */
-#define CALL_SHORT 0x00000002 /* Never call indirect. */
-
/* These bits describe the different types of function supported
by the ARM backend. They are exclusive. i.e. a function cannot be both a
normal function and an interworked function, for example. Knowing the
#define ARM_FT_NAKED (1 << 3) /* No prologue or epilogue. */
#define ARM_FT_VOLATILE (1 << 4) /* Does not return. */
#define ARM_FT_NESTED (1 << 5) /* Embedded inside another func. */
+#define ARM_FT_STACKALIGN (1 << 6) /* Called with misaligned stack. */
/* Some macros to test these flags. */
#define ARM_FUNC_TYPE(t) (t & ARM_FT_TYPE_MASK)
#define IS_VOLATILE(t) (t & ARM_FT_VOLATILE)
#define IS_NAKED(t) (t & ARM_FT_NAKED)
#define IS_NESTED(t) (t & ARM_FT_NESTED)
+#define IS_STACKALIGN(t) (t & ARM_FT_STACKALIGN)
/* Structure used to hold the function stack frame layout. Offsets are
int iwmmxt_nregs;
int named_count;
int nargs;
- /* One of CALL_NORMAL, CALL_LONG or CALL_SHORT. */
- int call_cookie;
int can_split;
} CUMULATIVE_ARGS;
(TYPE is null for libcalls where that information may not be available.) */
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
(CUM).nargs += 1; \
- if (arm_vector_mode_supported_p (MODE) \
- && (CUM).named_count > (CUM).nargs) \
+ if (arm_vector_mode_supported_p (MODE) \
+ && (CUM).named_count > (CUM).nargs \
+ && TARGET_IWMMXT_ABI) \
(CUM).iwmmxt_nregs += 1; \
else \
(CUM).nregs += ARM_NUM_REGS2 (MODE, TYPE)
frame. */
#define EXIT_IGNORE_STACK 1
-#define EPILOGUE_USES(REGNO) (reload_completed && (REGNO) == LR_REGNUM)
+#define EPILOGUE_USES(REGNO) ((REGNO) == LR_REGNUM)
/* Determine if the epilogue should be output as RTL.
You should override this if you define FUNCTION_EXTRA_EPILOGUE. */
+/* This is disabled for Thumb-2 because it will confuse the
+ conditional insn counter. */
#define USE_RETURN_INSN(ISCOND) \
(TARGET_ARM ? use_return_insn (ISCOND, NULL) : 0)
assemble_aligned_integer (UNITS_PER_WORD, const0_rtx); \
}
-/* On the Thumb we always switch into ARM mode to execute the trampoline.
- Why - because it is easier. This code will always be branched to via
- a BX instruction and since the compiler magically generates the address
- of the function the linker has no opportunity to ensure that the
- bottom bit is set. Thus the processor will be in ARM mode when it
- reaches this code. So we duplicate the ARM trampoline code and add
- a switch into Thumb mode as well. */
-#define THUMB_TRAMPOLINE_TEMPLATE(FILE) \
+/* The Thumb-2 trampoline is similar to the arm implementation.
+ Unlike 16-bit Thumb, we enter the stub in thumb mode. */
+#define THUMB2_TRAMPOLINE_TEMPLATE(FILE) \
+{ \
+ asm_fprintf (FILE, "\tldr.w\t%r, [%r, #4]\n", \
+ STATIC_CHAIN_REGNUM, PC_REGNUM); \
+ asm_fprintf (FILE, "\tldr.w\t%r, [%r, #4]\n", \
+ PC_REGNUM, PC_REGNUM); \
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx); \
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx); \
+}
+
+#define THUMB1_TRAMPOLINE_TEMPLATE(FILE) \
{ \
- fprintf (FILE, "\t.code 32\n"); \
+ ASM_OUTPUT_ALIGN(FILE, 2); \
+ fprintf (FILE, "\t.code\t16\n"); \
fprintf (FILE, ".Ltrampoline_start:\n"); \
- asm_fprintf (FILE, "\tldr\t%r, [%r, #8]\n", \
- STATIC_CHAIN_REGNUM, PC_REGNUM); \
- asm_fprintf (FILE, "\tldr\t%r, [%r, #8]\n", \
- IP_REGNUM, PC_REGNUM); \
- asm_fprintf (FILE, "\torr\t%r, %r, #1\n", \
- IP_REGNUM, IP_REGNUM); \
- asm_fprintf (FILE, "\tbx\t%r\n", IP_REGNUM); \
- fprintf (FILE, "\t.word\t0\n"); \
- fprintf (FILE, "\t.word\t0\n"); \
- fprintf (FILE, "\t.code 16\n"); \
+ asm_fprintf (FILE, "\tpush\t{r0, r1}\n"); \
+ asm_fprintf (FILE, "\tldr\tr0, [%r, #8]\n", \
+ PC_REGNUM); \
+ asm_fprintf (FILE, "\tmov\t%r, r0\n", \
+ STATIC_CHAIN_REGNUM); \
+ asm_fprintf (FILE, "\tldr\tr0, [%r, #8]\n", \
+ PC_REGNUM); \
+ asm_fprintf (FILE, "\tstr\tr0, [%r, #4]\n", \
+ SP_REGNUM); \
+ asm_fprintf (FILE, "\tpop\t{r0, %r}\n", \
+ PC_REGNUM); \
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx); \
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx); \
}
#define TRAMPOLINE_TEMPLATE(FILE) \
if (TARGET_ARM) \
ARM_TRAMPOLINE_TEMPLATE (FILE) \
+ else if (TARGET_THUMB2) \
+ THUMB2_TRAMPOLINE_TEMPLATE (FILE) \
else \
- THUMB_TRAMPOLINE_TEMPLATE (FILE)
+ THUMB1_TRAMPOLINE_TEMPLATE (FILE)
+
+/* Thumb trampolines should be entered in thumb mode, so set the bottom bit
+ of the address. */
+#define TRAMPOLINE_ADJUST_ADDRESS(ADDR) do \
+{ \
+ if (TARGET_THUMB) \
+ (ADDR) = expand_simple_binop (Pmode, IOR, (ADDR), GEN_INT(1), \
+ gen_reg_rtx (Pmode), 0, OPTAB_LIB_WIDEN); \
+} while(0)
/* Length in units of the trampoline for entering a nested function. */
-#define TRAMPOLINE_SIZE (TARGET_ARM ? 16 : 24)
+#define TRAMPOLINE_SIZE (TARGET_32BIT ? 16 : 20)
/* Alignment required for a trampoline in bits. */
#define TRAMPOLINE_ALIGNMENT 32
{ \
emit_move_insn (gen_rtx_MEM (SImode, \
plus_constant (TRAMP, \
- TARGET_ARM ? 8 : 16)), \
+ TARGET_32BIT ? 8 : 12)), \
CXT); \
emit_move_insn (gen_rtx_MEM (SImode, \
plus_constant (TRAMP, \
- TARGET_ARM ? 12 : 20)), \
+ TARGET_32BIT ? 12 : 16)), \
FNADDR); \
emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__clear_cache"), \
0, VOIDmode, 2, TRAMP, Pmode, \
\f
/* Addressing modes, and classification of registers for them. */
#define HAVE_POST_INCREMENT 1
-#define HAVE_PRE_INCREMENT TARGET_ARM
-#define HAVE_POST_DECREMENT TARGET_ARM
-#define HAVE_PRE_DECREMENT TARGET_ARM
-#define HAVE_PRE_MODIFY_DISP TARGET_ARM
-#define HAVE_POST_MODIFY_DISP TARGET_ARM
-#define HAVE_PRE_MODIFY_REG TARGET_ARM
-#define HAVE_POST_MODIFY_REG TARGET_ARM
+#define HAVE_PRE_INCREMENT TARGET_32BIT
+#define HAVE_POST_DECREMENT TARGET_32BIT
+#define HAVE_PRE_DECREMENT TARGET_32BIT
+#define HAVE_PRE_MODIFY_DISP TARGET_32BIT
+#define HAVE_POST_MODIFY_DISP TARGET_32BIT
+#define HAVE_PRE_MODIFY_REG TARGET_32BIT
+#define HAVE_POST_MODIFY_REG TARGET_32BIT
/* Macros to check register numbers against specific register classes. */
#define TEST_REGNO(R, TEST, VALUE) \
((R TEST VALUE) || ((unsigned) reg_renumber[R] TEST VALUE))
-/* On the ARM, don't allow the pc to be used. */
+/* Don't allow the pc to be used. */
#define ARM_REGNO_OK_FOR_BASE_P(REGNO) \
(TEST_REGNO (REGNO, <, PC_REGNUM) \
|| TEST_REGNO (REGNO, ==, FRAME_POINTER_REGNUM) \
|| TEST_REGNO (REGNO, ==, ARG_POINTER_REGNUM))
-#define THUMB_REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) \
+#define THUMB1_REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) \
(TEST_REGNO (REGNO, <=, LAST_LO_REGNUM) \
|| (GET_MODE_SIZE (MODE) >= 4 \
&& TEST_REGNO (REGNO, ==, STACK_POINTER_REGNUM)))
#define REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) \
- (TARGET_THUMB \
- ? THUMB_REGNO_MODE_OK_FOR_BASE_P (REGNO, MODE) \
+ (TARGET_THUMB1 \
+ ? THUMB1_REGNO_MODE_OK_FOR_BASE_P (REGNO, MODE) \
: ARM_REGNO_OK_FOR_BASE_P (REGNO))
/* Nonzero if X can be the base register in a reg+reg addressing mode.
#else
+/* ??? Should the TARGET_ARM here also apply to thumb2? */
#define CONSTANT_ADDRESS_P(X) \
(GET_CODE (X) == SYMBOL_REF \
&& (CONSTANT_POOL_ADDRESS_P (X) \
#define LEGITIMATE_CONSTANT_P(X) \
(!arm_tls_referenced_p (X) \
- && (TARGET_ARM ? ARM_LEGITIMATE_CONSTANT_P (X) \
- : THUMB_LEGITIMATE_CONSTANT_P (X)))
-
-/* Special characters prefixed to function names
- in order to encode attribute like information.
- Note, '@' and '*' have already been taken. */
-#define SHORT_CALL_FLAG_CHAR '^'
-#define LONG_CALL_FLAG_CHAR '#'
-
-#define ENCODED_SHORT_CALL_ATTR_P(SYMBOL_NAME) \
- (*(SYMBOL_NAME) == SHORT_CALL_FLAG_CHAR)
-
-#define ENCODED_LONG_CALL_ATTR_P(SYMBOL_NAME) \
- (*(SYMBOL_NAME) == LONG_CALL_FLAG_CHAR)
+ && (TARGET_32BIT ? ARM_LEGITIMATE_CONSTANT_P (X) \
+ : THUMB_LEGITIMATE_CONSTANT_P (X)))
#ifndef SUBTARGET_NAME_ENCODING_LENGTHS
#define SUBTARGET_NAME_ENCODING_LENGTHS
be stripped from the start of a function's name, if that
name starts with the indicated character. */
#define ARM_NAME_ENCODING_LENGTHS \
- case SHORT_CALL_FLAG_CHAR: return 1; \
- case LONG_CALL_FLAG_CHAR: return 1; \
case '*': return 1; \
SUBTARGET_NAME_ENCODING_LENGTHS
#define ASM_OUTPUT_LABELREF(FILE, NAME) \
arm_asm_output_labelref (FILE, NAME)
+/* Output IT instructions for conditionally executed Thumb-2 instructions. */
+#define ASM_OUTPUT_OPCODE(STREAM, PTR) \
+ if (TARGET_THUMB2) \
+ thumb2_asm_output_opcode (STREAM);
+
/* The EABI specifies that constructors should go in .init_array.
Other targets use .ctors for compatibility. */
#ifndef ARM_EABI_CTORS_SECTION_OP
#define TARGET_ARM_DYNAMIC_VAGUE_LINKAGE_P true
#endif
-/* Set the short-call flag for any function compiled in the current
- compilation unit. We skip this for functions with the section
- attribute when long-calls are in effect as this tells the compiler
- that the section might be placed a long way from the caller.
- See arm_is_longcall_p() for more information. */
-#define ARM_DECLARE_FUNCTION_SIZE(STREAM, NAME, DECL) \
- if (!TARGET_LONG_CALLS || ! DECL_SECTION_NAME (DECL)) \
- arm_encode_call_attribute (DECL, SHORT_CALL_FLAG_CHAR)
-
#define ARM_OUTPUT_FN_UNWIND(F, PROLOGUE) arm_output_fn_unwind (F, PROLOGUE)
#ifdef TARGET_UNWIND_INFO
We have two alternate definitions for each of them.
The usual definition accepts all pseudo regs; the other rejects
them unless they have been allocated suitable hard regs.
- The symbol REG_OK_STRICT causes the latter definition to be used. */
+ The symbol REG_OK_STRICT causes the latter definition to be used.
+ Thumb-2 has the same restrictions as arm. */
#ifndef REG_OK_STRICT
#define ARM_REG_OK_FOR_BASE_P(X) \
|| REGNO (X) == FRAME_POINTER_REGNUM \
|| REGNO (X) == ARG_POINTER_REGNUM)
-#define THUMB_REG_MODE_OK_FOR_BASE_P(X, MODE) \
+#define THUMB1_REG_MODE_OK_FOR_BASE_P(X, MODE) \
(REGNO (X) <= LAST_LO_REGNUM \
|| REGNO (X) >= FIRST_PSEUDO_REGISTER \
|| (GET_MODE_SIZE (MODE) >= 4 \
#define ARM_REG_OK_FOR_BASE_P(X) \
ARM_REGNO_OK_FOR_BASE_P (REGNO (X))
-#define THUMB_REG_MODE_OK_FOR_BASE_P(X, MODE) \
- THUMB_REGNO_MODE_OK_FOR_BASE_P (REGNO (X), MODE)
+#define THUMB1_REG_MODE_OK_FOR_BASE_P(X, MODE) \
+ THUMB1_REGNO_MODE_OK_FOR_BASE_P (REGNO (X), MODE)
#define REG_STRICT_P 1
/* Now define some helpers in terms of the above. */
#define REG_MODE_OK_FOR_BASE_P(X, MODE) \
- (TARGET_THUMB \
- ? THUMB_REG_MODE_OK_FOR_BASE_P (X, MODE) \
+ (TARGET_THUMB1 \
+ ? THUMB1_REG_MODE_OK_FOR_BASE_P (X, MODE) \
: ARM_REG_OK_FOR_BASE_P (X))
#define ARM_REG_OK_FOR_INDEX_P(X) ARM_REG_OK_FOR_BASE_P (X)
-/* For Thumb, a valid index register is anything that can be used in
+/* For 16-bit Thumb, a valid index register is anything that can be used in
a byte load instruction. */
-#define THUMB_REG_OK_FOR_INDEX_P(X) THUMB_REG_MODE_OK_FOR_BASE_P (X, QImode)
+#define THUMB1_REG_OK_FOR_INDEX_P(X) \
+ THUMB1_REG_MODE_OK_FOR_BASE_P (X, QImode)
/* Nonzero if X is a hard reg that can be used as an index
or if it is a pseudo reg. On the Thumb, the stack pointer
is not suitable. */
#define REG_OK_FOR_INDEX_P(X) \
- (TARGET_THUMB \
- ? THUMB_REG_OK_FOR_INDEX_P (X) \
+ (TARGET_THUMB1 \
+ ? THUMB1_REG_OK_FOR_INDEX_P (X) \
: ARM_REG_OK_FOR_INDEX_P (X))
/* Nonzero if X can be the base register in a reg+reg addressing mode.
goto WIN; \
}
-#define THUMB_GO_IF_LEGITIMATE_ADDRESS(MODE,X,WIN) \
+#define THUMB2_GO_IF_LEGITIMATE_ADDRESS(MODE,X,WIN) \
+ { \
+ if (thumb2_legitimate_address_p (MODE, X, REG_STRICT_P)) \
+ goto WIN; \
+ }
+
+#define THUMB1_GO_IF_LEGITIMATE_ADDRESS(MODE,X,WIN) \
{ \
- if (thumb_legitimate_address_p (MODE, X, REG_STRICT_P)) \
+ if (thumb1_legitimate_address_p (MODE, X, REG_STRICT_P)) \
goto WIN; \
}
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN) \
if (TARGET_ARM) \
ARM_GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN) \
- else /* if (TARGET_THUMB) */ \
- THUMB_GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN)
+ else if (TARGET_THUMB2) \
+ THUMB2_GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN) \
+ else /* if (TARGET_THUMB1) */ \
+ THUMB1_GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN)
\f
/* Try machine-dependent ways of modifying an illegitimate address
X = arm_legitimize_address (X, OLDX, MODE); \
} while (0)
-#define THUMB_LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
+/* ??? Implement LEGITIMIZE_ADDRESS for thumb2. */
+#define THUMB2_LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
+do { \
+} while (0)
+
+#define THUMB1_LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
do { \
X = thumb_legitimize_address (X, OLDX, MODE); \
} while (0)
do { \
if (TARGET_ARM) \
ARM_LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN); \
+ else if (TARGET_THUMB2) \
+ THUMB2_LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN); \
else \
- THUMB_LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN); \
+ THUMB1_LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN); \
\
if (memory_address_p (MODE, X)) \
goto WIN; \
/* Nothing helpful to do for the Thumb */
#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL) \
- if (TARGET_ARM) \
+ if (TARGET_32BIT) \
ARM_GO_IF_MODE_DEPENDENT_ADDRESS (ADDR, LABEL)
\f
for the index in the tablejump instruction. */
#define CASE_VECTOR_MODE Pmode
+#define CASE_VECTOR_PC_RELATIVE TARGET_THUMB2
+
+#define CASE_VECTOR_SHORTEN_MODE(min, max, body) \
+ ((min < 0 || max >= 0x2000 || !TARGET_THUMB2) ? SImode \
+ : (max >= 0x200) ? HImode \
+ : QImode)
+
/* signed 'char' is most compatible, but RISC OS wants it unsigned.
unsigned is probably best, but may break some code. */
#ifndef DEFAULT_SIGNED_CHAR
/* Moves to and from memory are quite expensive */
#define MEMORY_MOVE_COST(M, CLASS, IN) \
- (TARGET_ARM ? 10 : \
+ (TARGET_32BIT ? 10 : \
((GET_MODE_SIZE (M) < 4 ? 8 : 2 * GET_MODE_SIZE (M)) \
* (CLASS == LO_REGS ? 1 : 2)))
/* Try to generate sequences that don't involve branches, we can then use
conditional instructions */
#define BRANCH_COST \
- (TARGET_ARM ? 4 : (optimize > 1 ? 1 : 0))
+ (TARGET_32BIT ? 4 : (optimize > 0 ? 2 : 0))
\f
/* Position Independent Code. */
/* We decide which register to use based on the compilation options and
#define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 32, 1)
\f
#undef ASM_APP_OFF
-#define ASM_APP_OFF (TARGET_THUMB ? "\t.code\t16\n" : "")
+#define ASM_APP_OFF (TARGET_THUMB1 ? "\t.code\t16\n" : \
+ TARGET_THUMB2 ? "\t.thumb\n" : "")
/* Output a push or a pop instruction (only used when profiling). */
#define ASM_OUTPUT_REG_PUSH(STREAM, REGNO) \
asm_fprintf (STREAM, "\tpop {%r}\n", REGNO); \
} while (0)
+/* Jump table alignment is explicit in ASM_OUTPUT_CASE_LABEL. */
+#define ADDR_VEC_ALIGN(JUMPTABLE) 0
+
/* This is how to output a label which precedes a jumptable. Since
Thumb instructions are 2 bytes, we may need explicit alignment here. */
#undef ASM_OUTPUT_CASE_LABEL
-#define ASM_OUTPUT_CASE_LABEL(FILE, PREFIX, NUM, JUMPTABLE) \
- do \
- { \
- if (TARGET_THUMB) \
- ASM_OUTPUT_ALIGN (FILE, 2); \
- (*targetm.asm_out.internal_label) (FILE, PREFIX, NUM); \
- } \
+#define ASM_OUTPUT_CASE_LABEL(FILE, PREFIX, NUM, JUMPTABLE) \
+ do \
+ { \
+ if (TARGET_THUMB && GET_MODE (PATTERN (JUMPTABLE)) == SImode) \
+ ASM_OUTPUT_ALIGN (FILE, 2); \
+ (*targetm.asm_out.internal_label) (FILE, PREFIX, NUM); \
+ } \
+ while (0)
+
+/* Make sure subsequent insns are aligned after a TBB. */
+#define ASM_OUTPUT_CASE_END(FILE, NUM, JUMPTABLE) \
+ do \
+ { \
+ if (GET_MODE (PATTERN (JUMPTABLE)) == QImode) \
+ ASM_OUTPUT_ALIGN (FILE, 1); \
+ } \
while (0)
#define ARM_DECLARE_FUNCTION_NAME(STREAM, NAME, DECL) \
{ \
if (TARGET_THUMB) \
{ \
- if (is_called_in_ARM_mode (DECL) \
- || current_function_is_thunk) \
+ if (is_called_in_ARM_mode (DECL) \
+ || (TARGET_THUMB1 && current_function_is_thunk)) \
fprintf (STREAM, "\t.code 32\n") ; \
+ else if (TARGET_THUMB1) \
+ fprintf (STREAM, "\t.code\t16\n\t.thumb_func\n") ; \
else \
- fprintf (STREAM, "\t.code 16\n\t.thumb_func\n") ; \
+ fprintf (STREAM, "\t.thumb\n\t.thumb_func\n") ; \
} \
if (TARGET_POKE_FUNCTION_NAME) \
arm_poke_function_name (STREAM, (char *) NAME); \
}
#endif
\f
+/* Add two bytes to the length of conditionally executed Thumb-2
+ instructions for the IT instruction. */
+#define ADJUST_INSN_LENGTH(insn, length) \
+ if (TARGET_THUMB2 && GET_CODE (PATTERN (insn)) == COND_EXEC) \
+ length += 2;
+
/* Only perform branch elimination (by making instructions conditional) if
- we're optimizing. Otherwise it's of no use anyway. */
+ we're optimizing. For Thumb-2 check if any IT instructions need
+ outputting. */
#define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
if (TARGET_ARM && optimize) \
arm_final_prescan_insn (INSN); \
- else if (TARGET_THUMB) \
- thumb_final_prescan_insn (INSN)
+ else if (TARGET_THUMB2) \
+ thumb2_final_prescan_insn (INSN); \
+ else if (TARGET_THUMB1) \
+ thumb1_final_prescan_insn (INSN)
#define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
- (CODE == '@' || CODE == '|' \
- || (TARGET_ARM && (CODE == '?')) \
+ (CODE == '@' || CODE == '|' || CODE == '.' \
+ || CODE == '(' || CODE == ')' \
+ || (TARGET_32BIT && (CODE == '?')) \
+ || (TARGET_THUMB2 && (CODE == '!')) \
|| (TARGET_THUMB && (CODE == '_')))
/* Output an operand of an instruction. */
}
#define PRINT_OPERAND_ADDRESS(STREAM, X) \
- if (TARGET_ARM) \
+ if (TARGET_32BIT) \
ARM_PRINT_OPERAND_ADDRESS (STREAM, X) \
else \
THUMB_PRINT_OPERAND_ADDRESS (STREAM, X)
OSDN Git Service
