# GCC build-, host- and target-specific configuration file.
-# Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
#This file is part of GCC.
#
# cpu_type The name of the cpu, if different from machine.
#
+# tm_defines List of target macros to define for all compilations.
+#
# tm_file A list of target macro files, if different from
# "$cpu_type/$cpu_type.h". Usually it's constructed
# per target in a way like this:
# makefile-fragments, if different from
# "$cpu_type/t-$cpu_type".
#
-# float_format Set to the symbolic name for the floating-point
-# formats used for this machine, if different from
-# "i64". Used to derive a header file name to
-# include, like "vax" for "float-vax.h". If no such
-# file is wanted, set to "none".
+# extra_modes The name of the file containing a list of extra
+# machine modes, if necessary and different from
+# "$cpu_type/$cpu_type-modes.def".
#
# extra_objs List of extra objects that should be linked into
# the compiler proper (cc1, cc1obj, cc1plus)
# cxx_target_objs List of extra target-dependent objects that be
# linked into the C++ compiler only.
#
+# target_gtfiles List of extra source files with type information.
+#
# build_xm_defines List of macros to define when compiling for the
# build machine.
#
#
# gas Set to yes or no depending on whether the target
# system normally uses GNU as.
+#
+# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
+# for this target. This is true iff
+# MAX_LONG_TYPE_SIZE is 64. (The code which
+# determines the underlying integral type for
+# HOST_WIDE_INT cannot see the definition of
+# MAX_LONG_TYPE_SIZE.)
# The following variables are used in each case-construct to build up the
# outgoing variables:
extra_gcc_objs=
c_target_objs=
cxx_target_objs=
+tm_defines=
xm_defines=
-float_format=
# Set this to force installation and use of collect2.
use_collect2=
# Set this to override the default target model.
gas="$gas_flag"
gnu_ld="$gnu_ld_flag"
enable_threads=$enable_threads_flag
+target_gtfiles=
+need_64bit_hwint=
# Obsolete configurations.
-# To avoid some tedious lists, we have a blacklist with a whitelist
-# embedded within it.
case $machine in
- 1750a-* \
- | a29k-* \
- | alpha*-*-osf[123]* \
- | arm-*-riscix* \
- | c*-convex-* \
- | clipper-* \
- | elxsi-* \
- | i860-* \
- | i?86-*-aix* \
- | i?86-*-bsd* \
- | i?86-*-chorusos* \
- | i?86-*-dgux* \
- | i?86-*-freebsd1.* \
- | i?86-*-isc* \
- | i?86-*-linux*oldld* \
- | i?86-*-osf1* \
- | i?86-*-osfrose* \
- | i?86-*-rtemscoff* \
- | i?86-*-sunos* \
- | i?86-go32-rtems* \
- | i?86-next-* \
- | i?86-sequent-bsd* \
- | i?86-sequent-ptx[12]* \
- | i?86-sequent-sysv3* \
- | m68[k0]*-*-lynxos* \
- | m68[k0]*-*-rtemscoff* \
- | m68[k0]*-*-sysv3* \
- | m68[k0]*-altos-* \
- | m68[k0]*-apollo-* \
- | m68[k0]*-apple-* \
- | m68[k0]*-bull-* \
- | m68[k0]*-convergent-* \
- | m68[k0]*-isi-* \
- | m68[k0]*-next-* \
- | m68[k0]*-sony-* \
- | m88k-* \
- | mips-*-bsd* \
- | mips-*-riscos* \
- | mips-*-sysv* \
- | mips-*-ultrix* \
- | mips-dec-* \
- | mips-sgi-irix[1234]* \
- | mips-sony-* \
- | mips-tandem-* \
- | ns32k-* \
- | pj-* \
- | pjl-* \
- | romp-* \
- | sparc-*-rtemsaout* \
- | we32k-* \
-)
- case $machine in
- mips-sni-sysv4 \
- | m88k-*-aout* | m88k-*-openbsd* | m88k-*-sysv4* \
- | ns32k-*-netbsd* | ns32k-*-openbsd* \
- | romp-*-openbsd* \
- )
- # Whitelisted.
- ;;
- *)
+ m88k-*-aout* \
+ | m88k-*-openbsd* \
+ | m88k-*-sysv4* \
+ | mips-sni-sysv4 \
+ | mn10200-*-* \
+ | ns32k-*-openbsd* \
+ | romp-*-openbsd* \
+ )
if test "x$enable_obsolete" != xyes; then
echo "*** Configuration $machine is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
echo "*** unless a maintainer comes forward." >&2
exit 1
fi;;
- esac
esac
# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
case $machine in
alpha*-*-*)
cpu_type=alpha
+ need_64bit_hwint=yes
;;
strongarm*-*-*)
cpu_type=arm
xscale-*-*)
cpu_type=arm
;;
-c*-convex-*)
- cpu_type=convex
- extra_headers=proto.h
- ;;
i[34567]86-*-*)
cpu_type=i386
extra_headers="mmintrin.h xmmintrin.h"
x86_64-*-*)
cpu_type=i386
extra_headers="mmintrin.h xmmintrin.h"
+ need_64bit_hwint=yes
;;
ia64-*-*)
extra_headers=ia64intrin.h
+ need_64bit_hwint=yes
;;
hppa*-*-* | parisc*-*-*)
cpu_type=pa
;;
mips*-*-*)
cpu_type=mips
- ;;
-pj*-*-*)
- cpu_type=pj
+ need_64bit_hwint=yes
;;
powerpc*-*-*)
cpu_type=rs6000
- extra_headers="ppc-asm.h altivec.h"
+ extra_headers="ppc-asm.h altivec.h spe.h"
+ need_64bit_hwint=yes
+ ;;
+rs6000*-*-*)
+ need_64bit_hwint=yes
+ ;;
+sparc64*-*-*)
+ cpu_type=sparc
+ need_64bit_hwint=yes
;;
sparc*-*-*)
cpu_type=sparc
;;
-sh64-*-*)
+s390*-*-*)
+ need_64bit_hwint=yes
+ ;;
+# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
+sh[123456789l]*-*-*)
cpu_type=sh
+ need_64bit_hwint=yes
;;
+tic4x-*-*)
+ cpu_type=c4x
+ ;;
esac
tm_file=${cpu_type}/${cpu_type}.h
then
tm_p_file=${cpu_type}/${cpu_type}-protos.h
fi
+extra_modes=
+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
+then
+ extra_modes=${cpu_type}/${cpu_type}-modes.def
+fi
case $machine in
x86_64-*-*)
;;
esac
-# Common parts for GNU/Linux, GNU/Hurd, OpenBSD, NetBSD, and FreeBSD systems.
+# Common parts for widely ported systems.
case $machine in
*-*-linux*)
xm_defines=POSIX
+ case $machine in
+ *-*-linux*ecoff* | *-*-linux*libc1* | *-*-linux*oldld* | *-*-linux*aout*)
+ ;;
+ *)
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ gas=yes gnu_ld=yes
+ case x${enable_threads} in
+ x | xyes | xposix) thread_file='posix'
+ ;;
+ esac
+ ;;
+ esac
;;
*-*-gnu*)
# On the Hurd, the setup is just about the same on
xm_defines=POSIX
gas=yes
gnu_ld=yes
+ case x${enable_threads} in
+ xyes | xposix)
+ thread_file='posix'
+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
+ ;;
+ esac
+
+ # NetBSD 1.7 and later are set up to use GCC's crtstuff for
+ # ELF configurations. We will clear extra_parts in the
+ # a.out configurations.
+ case $machine in
+ *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ ;;
+ esac
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
# This is the place-holder for the generic a.out configuration
esac
fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
;;
+*-*-darwin*)
+ tm_file="${tm_file} darwin.h"
+ tm_p_file="${tm_p_file} darwin-protos.h"
+ tmake_file="t-darwin"
+ target_gtfiles="\$(srcdir)/config/darwin.c"
+ c_target_objs="darwin-c.o"
+ cxx_target_objs="darwin-c.o"
+ extra_parts="crt2.o"
+ # Darwin linker does collect2 functionality
+ use_collect2=no
+ extra_objs="darwin.o"
+ ;;
+*-*-vxworks*)
+ tmake_file=t-vxworks
+ tm_file="${tm_file} elfos.h svr4.h vxworks.h"
+ thread_file='vxworks'
+ use_collect2=yes
+ xm_defines=POSIX
+ ;;
esac
case $machine in
then tmake_file=${cpu_type}/t-$rest
fi
;;
-1750a-*-*)
- # 1750a is only supported as a target.
- case "$build,$host" in 1750a*,* | *,1750a* )
- echo "*** $machine is only supported as a target" >&2
- exit 1
- esac
- ;;
-a29k-*-bsd* | a29k-*-sym1*)
- tm_file="${tm_file} a29k/unix.h"
- xm_defines=POSIX
- use_collect2=yes
- ;;
-a29k-*-udi | a29k-*-coff)
- tm_file="${tm_file} dbxcoff.h"
- tmake_file=a29k/t-a29kbare
- ;;
-a29k*-*-rtems*)
- xm_defines=POSIX
- tm_file="a29k/a29k.h a29k/rtems.h rtems.h"
- tmake_file="a29k/t-a29kbare t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
-a29k-wrs-vxworks*)
- tm_file="${tm_file} dbxcoff.h a29k/vx29k.h"
- tmake_file=a29k/t-vx29k
- extra_parts="crtbegin.o crtend.o"
- thread_file='vxworks'
- ;;
-a29k-*-*) # Default a29k environment.
- use_collect2=yes
- ;;
alpha*-*-unicosmk*)
use_collect2=yes
tm_file="${tm_file} alpha/unicosmk.h"
target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
xm_defines=POSIX
- xm_file="alpha/xm-alpha-interix.h"
tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee"
if test x$enable_threads = xyes ; then
thread_file='posix'
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
alpha*-*-gnu*)
target_cpu_default="MASK_GAS"
tmake_file="alpha/t-alpha alpha/t-ieee"
;;
-alpha*-dec-osf*)
+alpha*-dec-osf[45]*)
xm_defines=POSIX
if test x$stabs = xyes
then
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm"
+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
+ tm_file="${tm_file} alpha/osf.h"
extra_headers=va_list.h
case $machine in
- *-*-osf1*)
- tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
- ;;
- *-*-osf[23]*)
- tm_file="${tm_file} alpha/osf.h alpha/osf2or3.h"
- ;;
*-*-osf4*)
- tm_file="${tm_file} alpha/osf.h"
- tmake_file="$tmake_file alpha/t-osf4"
# Some versions of OSF4 (specifically X4.0-9 296.7) have
# a broken tar, so we use cpio instead.
install_headers_dir=install-headers-cpio
+ # Set target_cpu_default except on 4.0a.
+ case $machine in
+ *-*-osf4.0a) ;;
+ *) target_cpu_default=MASK_SUPPORT_ARCH
+ esac
;;
*-*-osf5*)
- tm_file="${tm_file} alpha/osf.h alpha/osf5.h"
- tmake_file="$tmake_file alpha/t-osf4"
- float_format=i128
- ;;
- esac
- case $machine in
- *-*-osf4.0[b-z] | *-*-osf4.[1-9]* | *-*-osf5*)
+ tm_file="${tm_file} alpha/osf5.h"
target_cpu_default=MASK_SUPPORT_ARCH
;;
esac
;;
-alpha*-*-vxworks*)
- xm_defines=POSIX
- tm_file="${tm_file} dbx.h alpha/vxworks.h"
- tmake_file="alpha/t-alpha alpha/t-ieee"
- if [ x$gas != xyes ]
- then
- extra_passes="mips-tfile mips-tdump"
- fi
- use_collect2=yes
- thread_file='vxworks'
- ;;
alpha64-dec-*vms*)
xm_defines=POSIX
tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
- xm_file="alpha/xm-vms.h alpha/xm-vms64.h"
+ xm_file="alpha/xm-vms.h"
tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
xmake_file=alpha/x-vms
exeext=.exe
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h"
tmake_file=arm/t-arm-coff
;;
-arm-*-vxworks*)
- tm_file="arm/semi.h arm/aout.h arm/coff.h arm/vxarm.h arm/arm.h"
- tmake_file=arm/t-arm-coff
- thread_file='vxworks'
- ;;
-arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
- tm_file="arm/riscix1-1.h arm/arm.h"
- use_collect2=yes
- ;;
-arm-*-riscix*) # Acorn RISC machine
- if test x$gas = xyes
- then
- tm_file="arm/riscix.h arm/rix-gas.h arm/arm.h"
- else
- tm_file="arm/riscix.h arm/arm.h"
- fi
- tmake_file=arm/t-riscix
- use_collect2=yes
- ;;
arm-semi-aout | armel-semi-aout)
tm_file="arm/semi.h arm/aout.h arm/arm.h"
tmake_file=arm/t-semi
tmake_file="${tmake_file} arm/t-strongarm-elf"
;;
arm*-*-netbsdelf*)
- echo "GCC does not yet support the ${machine} target"; exit 1
+ tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
+ tmake_file="${tmake_file} arm/t-netbsd"
;;
arm*-*-netbsd*)
tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
tmake_file="t-netbsd arm/t-netbsd"
+ extra_parts=""
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
;;
avr-*-*)
;;
-c1-convex-*) # Convex C1
- target_cpu_default=1
- use_collect2=yes
- ;;
-c2-convex-*) # Convex C2
- target_cpu_default=2
- use_collect2=yes
- ;;
-c32-convex-*)
- target_cpu_default=4
- use_collect2=yes
- ;;
-c34-convex-*)
- target_cpu_default=8
- use_collect2=yes
- ;;
-c38-convex-*)
- target_cpu_default=16
- use_collect2=yes
- ;;
-c4x-*-rtems*)
+c4x-*-rtems* | tic4x-*-rtems*)
xm_defines=POSIX
tmake_file="c4x/t-c4x t-rtems"
tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
c_target_objs="c4x-c.o"
cxx_target_objs="c4x-c.o"
;;
-c4x-*)
- float_format=c4x
+c4x-* | tic4x-*)
tmake_file=c4x/t-c4x
c_target_objs="c4x-c.o"
cxx_target_objs="c4x-c.o"
;;
-clipper-intergraph-clix*)
- tm_file="${tm_file} svr3.h clipper/clix.h"
- xm_defines=POSIX
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
cris-*-aout)
tm_file="dbxelf.h ${tm_file} cris/aout.h"
gas=yes
cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
- thread_file=posix
- ;;
- esac
- gas=yes
;;
d30v-*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- float_format=i64
;;
dsp16xx-*)
;;
-elxsi-elxsi-*)
- use_collect2=yes
- ;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
tmake_file=fr30/t-fr30
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
+frv-*-elf)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
+ tmake_file=frv/t-frv
+ ;;
h8300-*-rtems*)
xm_defines=POSIX
tmake_file="h8300/t-h8300 t-rtems"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
- float_format=i32
;;
h8300-*-elf*)
tmake_file="h8300/t-h8300 h8300/t-elf"
tm_file="h8300/h8300.h h8300/elf.h"
- float_format=i32
;;
h8300-*-*)
- float_format=i32
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
- pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
+ pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
tmake_file=pa/t-linux64
gas=yes gnu_ld=yes
+ need_64bit_hwint=yes
;;
hppa*-*-linux* | parisc*-*-linux*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
hppa*-*-openbsd*)
target_cpu_default="MASK_PA_11"
xm_defines=POSIX
target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
- tmake_file="pa/t-bsd pa/t-pro"
+ tmake_file="pa/t-bsd pa/t-pro t-rtems"
xmake_file="pa/x-ada"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
;;
hppa1.0-*-osf*)
tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- float_format=i128
xm_defines=POSIX
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
xmake_file="pa/x-ada"
;;
hppa1.0-*-hpux10*)
tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- float_format=i128
xm_defines=POSIX
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
xmake_file="pa/x-ada"
;;
hppa*64*-*-hpux11*)
xm_defines=POSIX
- tm_file="pa/pa64-start.h ${tm_file} pa/pa64-regs.h pa/long_double.h pa/elf.h pa/pa-hpux.h pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
- float_format=i128
+ if test x$gas = xyes
+ then
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
+ pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ else
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
+ pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ fi
+ need_64bit_hwint=yes
tmake_file="pa/t-pa64 pa/t-pa-hpux"
xmake_file="pa/x-ada"
target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)"
-
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
+ fi
# if [ x$enable_threads = x ]; then
# enable_threads=$have_pthread_h
# fi
# tmake_file="${tmake_file} pa/t-dce-thr"
# fi
install_headers_dir=install-headers-cpio
- use_collect2=yes
;;
hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- float_format=i128
xm_defines=POSIX
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
xmake_file="pa/x-ada"
;;
hppa1.0-*-hpux11*)
tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- float_format=i128
xm_defines=POSIX
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
xmake_file="pa/x-ada"
tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h ${tm_file}"
tmake_file="t-slibgcc-elf-ver t-linux"
# broken_install=yes
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- # extra_parts="crtbegin.o crtend.o"
- gnu_ld=yes
- gas=yes
elf=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
-i[34567]86-*-chorusos*)
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h chorus.h"
- tmake_file="i386/t-i386elf t-svr4"
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
+i[34567]86-*-darwin*)
+ tm_file="${tm_file} i386/darwin.h"
;;
i[34567]86-*-elf*)
xm_defines=POSIX
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
tmake_file="i386/t-i386elf t-svr4"
;;
-i[34567]86-ibm-aix*) # IBM PS/2 running AIX
- if test x$gas = xyes
- then
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/aix386.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- else
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/aix386ng.h"
- use_collect2=yes
- fi
- xm_defines=POSIX
- ;;
i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
xm_defines="POSIX SMALL_ARG_MAX"
if test x$stabs = xyes -a x$gas = xyes
then
tm_file=i386/sysv4gdb.h
else
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
fi
extra_parts="crtbegin.o crtend.o"
tmake_file=i386/t-crtpic
;;
-i[34567]86-next-*)
- tm_p_file="${tm_p_file} nextstep-protos.h"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h nextstep.h i386/next.h"
- tmake_file=i386/t-next
- extra_objs=nextstep.o
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='mach'
- fi
- ;;
i[34567]86-*-netware) # Intel 80386's running netware
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
tmake_file=i386/t-netware
;;
-i[34567]86-sequent-bsd*) # 80386 from Sequent
- use_collect2=yes
- if test x$gas = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/sequent.h i386/seq-gas.h"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/sequent.h"
- fi
- ;;
-i[34567]86-sequent-ptx1*)
- xm_defines=POSIX
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h i386/seq-sysv3.h"
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
-i[34567]86-sequent-ptx2* | i[34567]86-sequent-sysv3*)
- xm_defines=POSIX
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h i386/seq-sysv3.h i386/seq2-sysv3.h"
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
if test x$gas = xyes
then
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
;;
-i386-sun-sunos*) # Sun i386 roadrunner
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/sun386.h i386/sun.h"
- use_collect2=yes
- ;;
-i[34567]86-wrs-vxworks*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h i386/vxi386.h"
- thread_file='vxworks'
+i[34567]86-sequent-sysv*) # would otherwise be caught by i?86-*-sysv*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
i[34567]86-*-aout*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
extra_parts='crtbegin.o crtend.o'
;;
-i[34567]86-*-bsdi* | i[34567]86-*-bsd386*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/386bsd.h i386/bsd386.h"
-# tmake_file=t-libc-ok
- ;;
-i[34567]86-*-bsd*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/386bsd.h"
-# tmake_file=t-libc-ok
-# Next line turned off because both 386BSD and BSD/386 use GNU ld.
-# use_collect2=yes
- ;;
-i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
+i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
tmake_file=t-freebsd
;;
;;
i[34567]86-*-netbsdelf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
- float_format=i386
;;
i[34567]86-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
tmake_file=t-netbsd
+ extra_parts=""
use_collect2=yes
;;
x86_64-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
- float_format=i386
;;
i[34567]86-*-openbsd*)
tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h ${tm_file}"
i[34567]86-*-coff*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
;;
-i[34567]86-*-isc*) # 80386 running ISC system
- xm_defines=POSIX
- if test x$gas = xyes -a x$stabs = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h i386/iscdbx.h"
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.ifile"
- else
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h i386/isc.h"
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- fi
- install_headers_dir=install-headers-cpio
- ;;
-i[34567]86-*-linux*oldld*) # Intel 80386's running GNU/Linux
- # with a.out format using
- # pre BFD linkers
- tmake_file="t-linux-aout i386/t-crtstuff"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-oldld.h"
- gnu_ld=yes
- float_format=i386
+i[34567]86-*-linux*oldld*) # would otherwise be caught by i?86-*-linux*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
# with a.out format
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
gnu_ld=yes
- float_format=i386
;;
i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
# with ELF format using the
tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
- float_format=i386
if test x$enable_threads = xyes; then
thread_file='single'
fi
# aka GNU/Linux C library 6
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gnu_ld=yes
- float_format=i386
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
x86_64-*-linux*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
i386/x86-64.h i386/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff i386/t-linux64"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gnu_ld=yes
- float_format=i386
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
;;
i[34567]86-*-gnu*)
- float_format=i386
;;
i[34567]86-go32-msdos | i[34567]86-*-go32*)
echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
gnu_ld=yes
gas=yes
exeext=.exe
- float_format=none
case $host in *pc-msdosdjgpp*)
target_alias=djgpp
;;
# tmake_file=t-libc-ok
use_collect2=yes
;;
-i[34567]86-*-osfrose*) # 386 using OSF/rose
- if test x$elf = xyes
- then
- tm_file="${tm_file} halfpic.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/osfrose.h i386/osfelf.h"
- use_collect2=
- else
- tm_file="${tm_file} halfpic.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/osfrose.h"
- use_collect2=yes
- fi
- tmake_file=i386/t-osf
- extra_objs=halfpic.o
- ;;
-i[34567]86-go32-rtems*)
- xm_defines=POSIX
- tm_file="dbxcoff.h ${tm_file} i386/djgpp.h i386/djgpp-rtems.h rtems.h"
- tmake_file=t-rtems
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
-i[34567]86-*-rtemscoff*)
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h i386/rtems.h rtems.h"
- tmake_file=t-rtems
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
+i[34567]86-go32-rtems* | i[34567]86-*-rtemscoff*)
+ # would otherwise be caught by i?86-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
-i[34567]86-*-rtems*|i[34567]86-*-rtemself*)
+i[34567]86-*-rtems*)
xm_defines=POSIX
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
extra_parts="crtbegin.o crtend.o crti.o crtn.o"
;;
i[34567]86-*-solaris2*)
xm_defines="POSIX SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sol2.h"
- if test x$gas = xyes; then
- tm_file="i386/sol2gas.h ${tm_file}"
- fi
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
tmake_file="i386/t-sol2 t-svr4"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
;;
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
xm_defines="POSIX SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
;;
-i[34567]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
- xm_defines='POSIX USE_C_ALLOCA SMALL_ARG_MAX'
- if test x$stabs = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/osf1elf.h i386/osf1elfgdb.h"
- else
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/osf1elf.h"
- fi
- tmake_file=i386/t-osf1elf
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- ;;
i[34567]86-*-sysv*) # Intel 80386's running system V
xm_defines=POSIX
if test x$gas = xyes
then
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.rfile"
+ extra_parts="svr3.ifile svr3z.ifile"
else
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
extra_parts="crtbegin.o crtend.o"
i[34567]86-*-win32)
xm_defines=POSIX
xm_file=i386/xm-cygwin.h
- float_format=i386
tmake_file=i386/t-cygwin
tm_file="${tm_file} i386/win32.h"
extra_objs=winnt.o
i[34567]86-*-pe | i[34567]86-*-cygwin*)
xm_defines=POSIX
xm_file=i386/xm-cygwin.h
- float_format=i386
tmake_file=i386/t-cygwin
tm_file=i386/cygwin.h
extra_objs=winnt.o
;;
i[34567]86-*-mingw32*)
tm_file=i386/mingw32.h
- float_format=i386
xm_defines=POSIX
xm_file=i386/xm-mingw32.h
tmake_file="i386/t-cygwin i386/t-mingw32"
;;
i[34567]86-*-interix3*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
- xm_file="i386/xm-i386-interix.h"
xm_defines=POSIX
tmake_file="t-interix i386/t-interix"
- extra_objs=interix.o
+ extra_objs=winnt.o
xmake_file="x-interix"
if test x$enable_threads = xyes ; then
thread_file='posix'
;;
i[34567]86-*-interix*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
- xm_file="i386/xm-i386-interix.h"
xm_defines=POSIX
tmake_file="t-interix i386/t-interix"
- extra_objs=interix.o
+ extra_objs=winnt.o
if test x$enable_threads = xyes ; then
thread_file='posix'
fi
tm_file="${tm_file} dbxcoff.h"
fi
;;
-i[34567]86-dg-dgux*)
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/dgux.h"
- tmake_file=i386/t-dgux
- install_headers_dir=install-headers-cpio
- ;;
-i860-alliant-*) # Alliant FX/2800
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h i860/sysv4.h i860/fx2800.h"
- tmake_file=i860/t-fx2800
- extra_parts="crtbegin.o crtend.o"
- ;;
-i860-*-bsd*)
- tm_file="${tm_file} i860/bsd.h"
- if test x$gas = xyes
- then
- tm_file="${tm_file} i860/bsd-gas.h"
- fi
- use_collect2=yes
- ;;
-i860-*-mach*)
- tm_file="${tm_file} i860/mach.h"
- tmake_file=t-libc-ok
- ;;
-i860-*-osf*) # Intel Paragon XP/S, OSF/1AD
- tm_file="${tm_file} svr3.h i860/paragon.h"
- xm_defines=POSIX
- ;;
-i860-*-sysv3*)
- tm_file="${tm_file} svr3.h i860/sysv3.h"
- xm_defines=POSIX
- extra_parts="crtbegin.o crtend.o"
- ;;
-i860-*-sysv4*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h i860/sysv4.h"
- xm_defines=POSIX
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
-i960-wrs-vxworks5 | i960-wrs-vxworks5.0*)
- tm_file="${tm_file} i960/vx960.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-wrs-vxworks5* | i960-wrs-vxworks)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/vx960-coff.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-wrs-vxworks*)
- tm_file="${tm_file} i960/vx960.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
i960-*-coff*)
tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
tmake_file=i960/t-960bare
c_target_objs="i960-c.o"
cxx_target_objs="i960-c.o"
;;
-ia64*-*-aix*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/aix.h"
- tmake_file="ia64/t-ia64 ia64/t-aix"
- target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
- ;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
then
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
- float_format=i386
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
;;
ia64*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
tmake_file="${tmake_file} ia64/t-ia64"
- float_format=i386
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
;;
ia64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
- if test x$enable_threads = xyes; then
- thread_file='posix'
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
+ if test x"$use_libunwind_exceptions" = xyes; then
+ tmake_file="$tmake_file t-libunwind"
fi
- float_format=i386
;;
ia64*-*-hpux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
- float_format=i386
+ use_collect2=no
+ c_target_objs="ia64-c.o"
+ cxx_target_objs="ia64-c.o"
+ ;;
+ip2k-*-elf)
;;
m32r-*-elf*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
out_file="m68hc11/m68hc11.c"
tmake_file="m68hc11/t-m68hc11-gas"
;;
-m68000-convergent-sysv*)
- tm_file=m68k/ctix.h
- xm_defines=POSIX
- use_collect2=yes
- ;;
m68000-hp-bsd*) # HP 9000/200 running BSD
tm_file=m68k/hp2bsd.h
use_collect2=yes
fi
use_collect2=yes
;;
-m68k-apple-aux*) # Apple Macintosh running A/UX
- xm_defines=POSIX
- tmake_file=m68k/t-aux
- install_headers_dir=install-headers-cpio
- extra_parts="crt1.o mcrt1.o maccrt1.o crt2.o crtn.o"
- tm_file=
- if test "$gnu_ld" = yes
- then
- tm_file="${tm_file} m68k/auxgld.h"
- else
- tm_file="${tm_file} m68k/auxld.h"
- fi
- if test "$gas" = yes
- then
- tm_file="${tm_file} m68k/auxgas.h"
- else
- tm_file="${tm_file} m68k/auxas.h"
- fi
- tm_file="${tm_file} m68k/a-ux.h"
- float_format=m68k
- ;;
-m68k-apollo-*)
- tm_file=m68k/apollo68.h
- use_collect2=yes
- float_format=m68k
- ;;
-m68k-altos-sysv*) # Altos 3068
- if test x$gas = xyes
- then
- tm_file=m68k/altos3068.h
- xm_defines=POSIX
- else
- echo "The Altos is supported only with the GNU assembler" 1>&2
- exit 1
- fi
- ;;
-m68k-bull-sysv*) # Bull DPX/2
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file=m68k/dpx2cdbx.h
- else
- tm_file=m68k/dpx2g.h
- fi
- else
- tm_file=m68k/dpx2.h
- fi
- xm_defines=POSIX
- use_collect2=yes
- ;;
m68k-atari-sysv4*) # Atari variant of V.4.
tm_file=m68k/atari.h
xm_defines=POSIX
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
- float_format=m68k
+ ;;
+m68k-apollo-sysv* | m68k-bull-sysv*)
+ # can otherwise be caught by m68k-*-sysv4*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
m68k-motorola-sysv*)
tm_file=m68k/mot3300.h
fi
gdb_needs_out_file_path=yes
extra_parts="crt0.o mcrt0.o"
- float_format=m68k
;;
m68k-ncr-sysv*) # NCR Tower 32 SVR3
tm_file=m68k/tower-as.h
xm_defines=POSIX
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
- float_format=m68k
;;
m68k-ccur-rtu)
tm_file=m68k/ccur-GAS.h
use_collect2=yes
- float_format=m68k
;;
m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd
tm_file=m68k/hp3bsd44.h
use_collect2=yes
- float_format=m68k
;;
m68k-hp-bsd*) # HP 9000/3xx running Berkeley Unix
tm_file=m68k/hp3bsd.h
use_collect2=yes
- float_format=m68k
- ;;
-m68k-isi-bsd*)
- if test x$with_fp = xno
- then
- tm_file=m68k/isi-nfp.h
- else
- tm_file=m68k/isi.h
- float_format=m68k
- fi
- use_collect2=yes
;;
m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
xm_defines=POSIX
fi
install_headers_dir=install-headers-cpio
use_collect2=yes
- float_format=m68k
;;
m68k-hp-hpux*) # HP 9000 series 300
xm_defines=POSIX
fi
install_headers_dir=install-headers-cpio
use_collect2=yes
- float_format=m68k
;;
m68k-sun-mach*)
tm_file=m68k/sun3mach.h
use_collect2=yes
- float_format=m68k
- ;;
-m68k-sony-newsos3*)
- if test x$gas = xyes
- then
- tm_file=m68k/news3gas.h
- else
- tm_file=m68k/news3.h
- fi
- use_collect2=yes
- float_format=m68k
- ;;
-m68k-sony-bsd* | m68k-sony-newsos*)
- if test x$gas = xyes
- then
- tm_file=m68k/newsgas.h
- else
- tm_file=m68k/news.h
- fi
- use_collect2=yes
- float_format=m68k
- ;;
-m68k-next-nextstep2*)
- tm_p_file="${tm_p_file} nextstep-protos.h"
- tm_file=m68k/next21.h
- tmake_file=m68k/t-next
- xmake_file=m68k/x-next
- extra_objs=nextstep.o
- use_collect2=yes
- float_format=m68k
- ;;
-m68k-next-nextstep[34]*)
- tm_p_file="${tm_p_file} nextstep-protos.h"
- tm_file=m68k/next.h
- tmake_file=m68k/t-next
- xmake_file=m68k/x-next
- extra_objs=nextstep.o
- extra_parts="crtbegin.o crtend.o"
- float_format=m68k
- if test x$enable_threads = xyes; then
- thread_file='mach'
- fi
;;
m68k-sun-sunos3*)
if test x$with_fp = xno
tm_file=m68k/sun3n3.h
else
tm_file=m68k/sun3o3.h
- float_format=m68k
fi
use_collect2=yes
;;
tm_file=m68k/sun3n.h
else
tm_file=m68k/sun3.h
- float_format=m68k
fi
use_collect2=yes
;;
-m68k-wrs-vxworks*)
- tm_file=m68k/vxm68k.h
- tmake_file=m68k/t-vxworks68
- thread_file='vxworks'
- float_format=m68k
- ;;
m68k-*-aout*)
tmake_file=m68k/t-m68kbare
tm_file="m68k/m68k-aout.h libgloss.h"
- float_format=m68k
;;
m68k-*-coff*)
tmake_file=m68k/t-m68kbare
tm_file="m68k/m68k-coff.h dbx.h"
- float_format=m68k
;;
m68020-*-elf* | m68k-*-elf*)
tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
tmake_file=m68k/t-m68kelf
extra_parts="crtbegin.o crtend.o"
;;
-m68k-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file=m68k/lynx.h
- else
- tm_file=m68k/lynx-ng.h
- fi
- tmake_file=m68k/t-lynx
- float_format=m68k
- ;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
case $machine in
target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
;;
esac
- float_format=m68k
;;
m68k*-*-netbsd*)
tm_file=m68k/netbsd.h
tmake_file=t-netbsd
- float_format=m68k
+ extra_parts=""
use_collect2=yes
;;
m68k*-*-openbsd*)
# needed to unconfuse gdb
tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
- float_format=m68k
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
-m68k-*-sysv3*) # Motorola m68k's running system V.3
- xm_defines=POSIX
- extra_parts="crtbegin.o crtend.o"
- float_format=m68k
- ;;
m68k-*-sysv4*) # Motorola m68k's running system V.4
tm_file=m68k/m68kv4.h
xm_defines=POSIX
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
- float_format=m68k
;;
m68k-*-linux*aout*) # Motorola m68k's running GNU/Linux
# with a.out format
tm_file=m68k/linux-aout.h
tmake_file="t-linux-aout m68k/t-linux-aout"
- float_format=m68k
gnu_ld=yes
;;
m68k-*-linux*libc1) # Motorola m68k's running GNU/Linux
tm_file=m68k/linux.h
tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 m68k/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- float_format=m68k
gnu_ld=yes
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
# aka the GNU/Linux C library 6.
tm_file=m68k/linux.h
tmake_file="t-slibgcc-elf-ver t-linux m68k/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- float_format=m68k
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
m68k-*-psos*)
tmake_file=m68k/t-m68kbare
tm_file=m68k/m68k-psos.h
- float_format=m68k
;;
-m68k-*-rtemscoff*)
- xm_defines=POSIX
- tmake_file="m68k/t-m68kbare t-rtems"
- tm_file="m68k/m68k-coff.h m68k/rtems.h rtems.h"
- float_format=m68k
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
+m68k-*-rtemscoff*) # would otherwise be caught by m68k-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
-m68k-*-rtemself*|m68k-*-rtems*)
+m68k-*-rtems*)
xm_defines=POSIX
tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
- float_format=m68k
extra_parts="crtbegin.o crtend.o"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
-m88k-dg-dgux*)
- xm_defines=POSIX
- case $machine in
- m88k-dg-dguxbcs*)
- tm_file="dbxelf.h elfos.h svr4.h m88k/dgux.h m88k/dguxbcs.h"
- tmake_file="m88k/t-dgux m88k/t-dguxbcs"
- ;;
- *)
- tm_file="dbxelf.h elfos.h svr4.h m88k/dgux.h"
- tmake_file=m88k/t-dgux
- ;;
- esac
- extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
- if test x$gas = xyes
- then
- tmake_file=m88k/t-dgux-gas
- fi
- ;;
-m88k-dolphin-sysv3*)
- xm_defines=POSIX
- tm_file=m88k/dolph.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=m88k/t-dolph
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
-m88k-tektronix-sysv3)
- xm_defines=POSIX
- tm_file=m88k/tekXD88.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=m88k/t-tekXD88
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
m88k-*-aout*)
xm_defines=POSIX
tm_file=m88k/m88k-aout.h
;;
-m88k-*-coff*)
- xm_defines=POSIX
- tm_file=m88k/m88k-coff.h
- tmake_file=m88k/t-bug
- ;;
-m88k-*-luna*)
- tm_file=m88k/luna.h
- extra_parts="crtbegin.o crtend.o"
- if test x$gas = xyes
- then
- tmake_file=m88k/t-luna-gas
- else
- tmake_file=m88k/t-luna
- fi
- ;;
m88k-*-openbsd*)
tmake_file="${tmake_file} m88k/t-luna-gas"
tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}"
;;
-m88k-*-sysv3*)
- xm_defines=POSIX
- tm_file=m88k/sysv3.h
- extra_parts="crtbegin.o crtend.o"
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
m88k-*-sysv4*)
xm_defines=POSIX
tm_file="dbxelf.h elfos.h svr4.h m88k/sysv4.h"
tm_file=mcore/mcore-pe.h
tmake_file=mcore/t-mcore-pe
;;
+mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
+ if test x$gas = xyes
+ then
+ tm_file="mips/iris5.h mips/iris5gas.h mips/iris6-o32-gas.h"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ tmake_file=mips/t-iris5-gas
+ else
+ tm_file="mips/iris5.h mips/iris6-o32-as.h"
+ tmake_file=mips/t-iris5-as
+ fi
+ tm_file="${tm_file} mips/iris6-o32.h"
+ tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
+ xm_defines=POSIX
+ xm_file=mips/xm-iris5.h
+ # mips-tfile doesn't work yet
+ # See comment in mips/iris5.h file.
+ use_collect2=yes
+# if test x$enable_threads = xyes; then
+# thread_file='irix'
+# fi
+ ;;
mips-sgi-irix6*) # SGI System V.4., IRIX 6
if test "x$gnu_ld" = xyes
then
else
tm_file=mips/iris6.h
fi
- tmake_file="mips/t-iris mips/t-iris6"
+ tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
xm_defines=POSIX
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
;;
-mips-wrs-vxworks)
- tm_file="mips/elf.h mips/vxworks.h"
- tmake_file=mips/t-ecoff
- gas=yes
- gnu_ld=yes
- extra_parts="crtbegin.o crtend.o"
- thread_file='vxworks'
- ;;
mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
tm_file="mips/iris6.h mips/cross64.h"
xm_defines=POSIX
then
tm_file="${tm_file} dbx.h"
fi
+ tmake_file=mips/t-iris5-gas
else
tm_file=mips/iris5.h
+ tmake_file=mips/t-iris5-as
fi
- tmake_file=mips/t-iris
+ tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
xm_defines=POSIX
xm_file=mips/xm-iris5.h
# mips-tfile doesn't work yet
# thread_file='irix'
# fi
;;
-mips-sgi-irix4loser*) # Mostly like a MIPS.
- tm_file="mips/iris4loser.h mips/iris3.h ${tm_file} mips/iris4.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-iris
- xm_defines=POSIX
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-irix4*) # Mostly like a MIPS.
- tm_file="mips/iris3.h ${tm_file} mips/iris4.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-iris
- xm_defines=POSIX
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-*) # Mostly like a MIPS.
- tm_file="mips/iris3.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-dec-osfrose*) # Decstation running OSF/1 reference port with OSF/rose.
- tm_file="mips/osfrose.h ${tm_file}"
- extra_objs=halfpic.o
- use_collect2=yes
- ;;
-mips-dec-osf*) # Decstation running OSF/1 as shipped by DIGITAL
- tm_file=mips/dec-osf1.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then :
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
+mips-sgi-*) # would otherwise be caught by mips-*-elf*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
-mips-dec-bsd*) # Decstation running 4.4 BSD
- tm_file=mips/dec-bsd.h
- if test x$gas = xyes
- then :
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
- tm_file="elfos.h mips/netbsd.h"
- case $machine in
- mips*el-*)
- tm_file="mips/little.h $tm_file"
- ;;
- esac
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file="elfos.h ${tm_file} mips/netbsd.h"
+ tmake_file="${tmake_file}"
;;
-mips*-*-linux*) # Linux MIPS, either endian.
- tm_file="dbxelf.h elfos.h svr4.h linux.h mips/linux.h"
- case $machine in
- mipsisa32*-*)
- tm_file="$tm_file mips/isa32-linux.h"
- target_cpu_default="MASK_SOFT_FLOAT"
- ;;
- esac
- case $machine in
- mips*el-*)
- tm_file="mips/little.h $tm_file"
- ;;
- esac
- tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux"
+mips64*-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
+ tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux mips/t-linux64"
+
+ # This default ABI is a partial lie: t-linux64 overrides the
+ # DRIVER_SELF_SPEC that sets the default abi, in the spec file
+ # that is installed. What GCC thinks of as the default must
+ # remain as ABI_32 such that the SONAMEs of the libgcc shared
+ # libraries remain compatible with those of mips-linux-gnu.
+ tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
+ target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
gnu_ld=yes
gas=yes
if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
-mips*el-*-openbsd*) # mips little endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- ;;
-mips*-*-openbsd*) # mips big endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- tm_file="mips/openbsd-be.h ${tm_file}"
- ;;
-mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
- tm_file="mips/news4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-sony-sysv*) # Sony NEWS 3800 with NEWSOS5.0.
- # That is based on svr4.
- # t-svr4 is not right because this system doesn't use ELF.
- tm_file="mips/news5.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-tandem-sysv4*) # Tandem S2 running NonStop UX
- tm_file="mips/svr4-5.h mips/svr4-t.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then
- extra_parts="crtbegin.o crtend.o"
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-ultrix* | mips-dec-mach3) # Decstation.
- tm_file="mips/ultrix.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then :
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-riscos[56789]bsd*)
- tm_file=mips/bsd-5.h # MIPS BSD 4.3, RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-bsd-gas
- else
- tmake_file=mips/t-bsd
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd*)
- tm_file="mips/bsd-4.h ${tm_file}" # MIPS BSD 4.3, RISC-OS 4.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-bsd-gas
- else
- tmake_file=mips/t-bsd
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-riscos[56789]sysv4*)
- tm_file=mips/svr4-5.h # MIPS System V.4., RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr4-gas
- else
- tmake_file=mips/t-svr4
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4*)
- tm_file="mips/svr4-4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr4-gas
- else
- tmake_file=mips/t-svr4
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
-mips-*-riscos[56789]sysv*)
- tm_file=mips/svr3-5.h # MIPS System V.3, RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr3-gas
- else
- tmake_file=mips/t-svr3
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
+ thread_file='posix'
fi
;;
-mips-*-sysv* | mips-*-riscos*sysv*)
- tm_file="mips/svr3-4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr3-gas
- else
- tmake_file=mips/t-svr3
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
+mips*-*-linux*) # Linux MIPS, either endian.
+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
+ case $machine in
+ mipsisa32*-*)
+ target_cpu_default="MASK_SOFT_FLOAT"
+ tm_defines="MIPS_ISA_DEFAULT=32"
+ ;;
+ esac
+ tmake_file="t-slibgcc-elf-ver t-linux"
;;
-mips-*-riscos[56789]*) # Default MIPS RISC-OS 5.0.
- tm_file=mips/mips-5.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
+mips*el-*-openbsd*) # mips little endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
;;
-mipsel-*-ecoff*)
- tm_file=mips/ecoffl.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-ecoff
+mips*-*-openbsd*) # mips big endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file="mips/openbsd-be.h ${tm_file}"
;;
-mips-*-ecoff*)
- tm_file="gofast.h mips/ecoff.h"
+mips-*-ecoff* | mipsel-*-ecoff*)
if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-ecoff
;;
-mipsisa32-*-elf*)
- tm_file="mips/isa3264.h mips/abi64.h"
+mipsisa32-*-elf* | mipsisa32el-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
- target_cpu_default="MASK_SOFT_FLOAT"
+ tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
;;
-mipsel-*-elf*)
- tm_file="mips/elfl.h"
- tmake_file=mips/t-elf
+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-isa3264
+ tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
;;
-mips-*-elf*)
- tm_file="mips/elf.h"
+mipsisa64-*-elf* | mipsisa64el-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-isa3264
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_MEABI"
+ ;;
+mipsisa64sr71k-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-sr71k
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_MEABI"
+ ;;
+mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
;;
-mips64el-*-elf*)
- tm_file="mips/elfl64.h"
+mips-*-elf* | mipsel-*-elf*)
+ tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-elf
;;
-mips64orionel-*-elf*)
- tm_file="mips/elforion.h mips/elfl64.h"
+mips64-*-elf* | mips64el-*-elf*)
+ tm_file="${tm_file} mips/elf64.h"
tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
;;
-mips64-*-elf*)
- tm_file="mips/elf64.h"
+mips64vr-*-elf* | mips64vrel-*-elf*)
+ tm_file="mips/vr.h ${tm_file} mips/elf64.h"
+ tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1"
+ tmake_file=mips/t-vr
+ ;;
+mips64orion-*-elf* | mips64orionel-*-elf*)
+ tm_file="${tm_file} mips/elforion.h mips/elf64.h"
tmake_file=mips/t-elf
- ;;
-mips64orion-*-elf*)
- tm_file="mips/elforion.h mips/elf64.h"
tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
;;
mips64orion-*-rtems*)
xm_defines=POSIX
- tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h"
+ tm_file="${tm_file} mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h"
tmake_file="mips/t-elf t-rtems"
+ tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
mips*-*-rtems*)
xm_defines=POSIX
- tm_file="mips/elf.h mips/rtems.h rtems.h"
+ tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
tmake_file="mips/t-elf t-rtems"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
-mipstx39el-*-elf*)
- tm_file="mips/r3900.h mips/elfl.h mips/abi64.h"
+mipstx39-*-elf* | mipstx39el-*-elf*)
+ tm_file="${tm_file} mips/r3900.h mips/elf.h"
tmake_file=mips/t-r3900
- target_cpu_default="MASK_SOFT_FLOAT"
- ;;
-mipstx39-*-elf*)
- tm_file="mips/r3900.h mips/elf.h mips/abi64.h"
- tmake_file=mips/t-r3900
- ;;
-mips-*-*) # Default MIPS RISC-OS 4.0.
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then :
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
;;
mmix-knuth-mmixware)
+ need_64bit_hwint=yes
;;
mn10200-*-*)
- float_format=i32
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
if test x$stabs = xyes
then
fi
use_collect2=no
;;
-ns32k-encore-bsd*)
- tm_file=ns32k/encore.h
- use_collect2=yes
- ;;
-ns32k-sequent-bsd*)
- tm_file=ns32k/sequent.h
- use_collect2=yes
- ;;
-ns32k-tek6100-bsd*)
- tm_file=ns32k/tek6100.h
- use_collect2=yes
- ;;
-ns32k-tek6200-bsd*)
- tm_file=ns32k/tek6200.h
- use_collect2=yes
- ;;
-ns32k-merlin-*)
- tm_file=ns32k/merlin.h
- use_collect2=yes
- ;;
-ns32k-pc532-mach*)
- tm_file=ns32k/pc532-mach.h
- use_collect2=yes
- ;;
-ns32k-pc532-minix*)
- tm_file=ns32k/pc532-min.h
- xm_defines='POSIX HZ=60'
- use_collect2=yes
- ;;
ns32k-*-netbsdelf*)
echo "GCC does not yet support the ${machine} target"; exit 1
;;
ns32k-*-netbsd*)
- tm_file=ns32k/netbsd.h
+ tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
# On NetBSD, the headers are already okay, except for math.h.
- tmake_file=t-netbsd
+ tmake_file="t-netbsd ns32k/t-ns32k"
+ extra_parts=""
use_collect2=yes
;;
pdp11-*-bsd)
ns32k-*-openbsd*)
# Nothing special
;;
-pj*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h pj/linux.h ${tm_file}"
- ;;
-pj-*)
- ;;
-pjl-*)
- tm_file="dbxelf.h elfos.h svr4.h pj/pjl.h ${tm_file}"
- ;;
-
-romp-*-aos*)
- use_collect2=yes
- ;;
-romp-*-mach*)
- use_collect2=yes
- ;;
romp-*-openbsd*)
# Nothing special
;;
powerpc-*-openbsd*)
- tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-openbsd"
extra_headers=
;;
powerpc64-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux64.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-linux rs6000/t-linux64"
+ tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-linux64"
;;
powerpc64-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
+ tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
;;
powerpc-*-beos*)
tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
xm_defines=POSIX
- tmake_file=rs6000/t-beos
+ tmake_file="rs6000/t-fprules rs6000/t-beos"
extra_headers=
;;
powerpc-*-darwin*)
- tm_file="${tm_file} darwin.h rs6000/darwin.h"
- tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file=rs6000/t-darwin
- extra_objs="darwin.o"
- c_target_objs="darwin-c.o"
- cxx_target_objs="darwin-c.o"
- # Darwin linker does collect2 functionality
- use_collect2=no
+ tm_file="${tm_file} rs6000/darwin.h"
+ tmake_file="rs6000/t-fprules t-darwin rs6000/t-darwin"
extra_headers=altivec.h
+ # override ppc default
+ need_64bit_hwint=
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
- xm_file=rs6000/xm-sysv4.h
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-sysv*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
xm_defines=POSIX
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
;;
powerpc-*-netbsd*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
+ tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+ tmake_file="${tmake_file} rs6000/t-netbsd"
;;
powerpc-*-chorusos*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
case x${enable_threads} in
xyes | xpthreads | xposix)
thread_file='posix'
powerpc-*-eabiaix*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
+powerpc-*-eabispe*)
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabisimaltivec*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
- tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabisim*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-elf*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-eabialtivec*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
- tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabi*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-rtems*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
- tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
powerpc-*-linux*libc1)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
powerpc-*-linux-gnualtivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
;;
powerpc-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
;;
powerpc-*-gnu-gnualtivec*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
powerpc-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
powerpc-wrs-vxworks*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/vxppc.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- thread_file='vxworks'
- ;;
-powerpcle-wrs-vxworks*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/vxppc.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- thread_file='vxworks'
+ # We want vxworks.h after rs6000/sysv4.h, which unfortunately
+ # means we have to redo the tm_file list from scratch.
+ tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
+ extra_headers=ppc-asm.h
+ ;;
+powerpc-wrs-windiss*)
+ xm_defines=POSIX
+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ thread_file=""
;;
powerpcle-*-sysv*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
xm_defines=POSIX
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
;;
powerpcle-*-elf*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpcle-*-eabisim*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpcle-*-eabi*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
rs6000-ibm-aix3.[01]*)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h"
- float_format=none
use_collect2=yes
;;
rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h"
- tmake_file=rs6000/t-newas
- float_format=none
+ tmake_file="rs6000/t-fprules rs6000/t-newas"
use_collect2=yes
extra_headers=
;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
- tmake_file=rs6000/t-newas
- float_format=none
+ tmake_file="rs6000/t-fprules rs6000/t-newas"
use_collect2=yes
extra_headers=
;;
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
- float_format=none
use_collect2=yes
thread_file='aix'
extra_headers=
;;
-rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
- float_format=none
+ use_collect2=yes
+ thread_file='aix'
+ extra_headers=
+ ;;
+rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
+ tmake_file=rs6000/t-aix52
use_collect2=yes
thread_file='aix'
extra_headers=
rs6000-ibm-aix*)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
- float_format=none
use_collect2=yes
;;
rs6000-bull-bosx)
xm_defines=POSIX
tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
- float_format=none
use_collect2=yes
;;
rs6000-*-mach*)
;;
rs6000-*-lynxos*)
tm_file="lynx.h rs6000/lynx.h"
- tmake_file=rs6000/t-rs6000
+ tmake_file=rs6000/t-fprules
use_collect2=yes
;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-linux"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff"
;;
s390x-*-linux*)
tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
tm_p_file=s390/s390-protos.h
md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
out_file=s390/s390.c
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-linux s390/t-linux64"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
;;
-sh-*-elf*)
+sh-*-elf* | sh[2346l]*-*-elf*)
tmake_file="sh/t-sh sh/t-elf"
- tm_file="${tm_file} sh/embed-elf.h"
- float_format=sh
- ;;
-sh64-*-elf*)
- tmake_file="sh/t-sh sh/t-elf sh/t-sh64"
- tm_file="${tm_file} sh/sh.h sh/embed-elf.h sh/sh64.h"
- float_format=sh
- extra_headers="../../config/sh/shmedia.h ../../config/sh/ushmedia.h ../../config/sh/sshmedia.h"
- # Not strictly necessary to check this, but a good idea anyway.
- if test $machine = $target; then
- target_requires_64bit_host_wide_int=yes
- fi
+ case $machine in
+ shl* | sh64l*)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h"
+ case $machine in
+ sh64*)
+ tmake_file="${tmake_file} sh/t-sh64"
+ tm_file="${tm_file} sh/sh64.h"
+ extra_headers="shmedia.h ushmedia.h sshmedia.h"
+ ;;
+ sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
+ sh4*) target_cpu_default="SELECT_SH4" ;;
+ sh3e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3*) target_cpu_default="SELECT_SH3" ;;
+ sh2e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2*) target_cpu_default="SELECT_SH2" ;;
+ esac
+ case $machine in
+ sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
+ esac
;;
sh-*-rtemself*)
xm_defines=POSIX
tmake_file="sh/t-sh sh/t-elf t-rtems"
- tm_file="${tm_file} sh/embed-elf.h sh/rtemself.h rtems.h"
- float_format=sh
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/rtemself.h rtems.h"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
sh-*-rtems*)
xm_defines=POSIX
tmake_file="sh/t-sh t-rtems"
- tm_file="${tm_file} sh/rtems.h rtems.h"
- float_format=sh
+ tm_file="${tm_file} sh/coff.h sh/rtems.h rtems.h"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
-sh-*-linux*)
- tm_file="${tm_file} sh/elf.h sh/linux.h"
- tmake_file="sh/t-sh sh/t-elf sh/t-linux"
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- float_format=sh
+sh-*-linux* | sh[2346lbe]*-*-linux*)
+ tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux sh/t-linux"
+ case $machine in
+ sh*be-*-* | sh*eb-*-*) ;;
+ *)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
+ case $machine in
+ sh64*)
+ tmake_file="${tmake_file} sh/t-sh64"
+ tm_file="${tm_file} sh/sh64.h"
+ extra_headers="shmedia.h ushmedia.h sshmedia.h"
+ ;;
+ sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
+ sh4*) target_cpu_default="SELECT_SH4" ;;
+ sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3e[lb]*) target_cpu_default="SELECT_SH3" ;;
+ sh3e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3*) target_cpu_default="SELECT_SH3" ;;
+ sh2e[lb]e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2e[lb]*) target_cpu_default="SELECT_SH2" ;;
+ sh2e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2*) target_cpu_default="SELECT_SH2" ;;
+ esac
+ case $machine in
+ sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
+ esac
+ ;;
+sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
+ sh64-*-netbsd* | sh64l*-*-netbsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
+ tmake_file="${tmake_file} sh/t-sh sh/t-elf"
+ case $machine in
+ sh*l*-*)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ *)
+ tmake_file="${tmake_file} sh/t-be"
+ ;;
+ esac
+ case $machine in
+ sh5*-*)
+ # SHmedia, 32-bit ABI
+ target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5"
+ ;;
+ sh64*-*)
+ # SHmedia, 64-bit ABI
+ target_cpu_default="SH5_BIT|SH4_BIT"
+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64"
+ ;;
+ *)
+ # SH3, software floating point
+ target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT"
+ tmake_file="${tmake_file} sh/t-netbsd"
+ ;;
+ esac
;;
sh-*-*)
- float_format=sh
+ tm_file="${tm_file} sh/coff.h"
;;
sparc-tti-*)
tm_file="${tm_file} sparc/pbd.h"
xm_defines=POSIX
;;
-sparc64-wrs-vxworks*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h sparc/biarch64.h gofast.h sparc/vxsparc64.h"
- tmake_file="sparc/t-vxsparc64 sparc/t-crtfm"
- use_collect2=yes
- ;;
-sparc-wrs-vxworks* | sparclite-wrs-vxworks*)
- tm_file="${tm_file} aoutos.h sparc/aout.h gofast.h sparc/vxsparc.h"
- tmake_file=sparc/t-vxsparc
- use_collect2=yes
- thread_file='vxworks'
- ;;
sparc-*-aout*)
tmake_file=sparc/t-sparcbare
tm_file="sparc/sparc.h aoutos.h sparc/aout.h libgloss.h"
sparc-*-netbsd*)
tm_file="${tm_file} sparc/aout.h netbsd.h netbsd-aout.h sparc/netbsd.h"
tmake_file=t-netbsd
+ extra_parts=""
use_collect2=yes
;;
sparc-*-openbsd*)
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
+sparc64-*-openbsd*)
+ tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ gas=yes gnu_ld=yes
+ with_cpu=ultrasparc
+ ;;
sparc-*-bsd*)
tm_file="${tm_file} sparc/bsd.h"
;;
sparc-*-chorusos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h chorus.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h chorus.h"
tmake_file="sparc/t-chorus-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- float_format=i64
case x${enable_threads} in
xyes | xpthreads | xposix)
thread_file='posix'
esac
;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
tmake_file="sparc/t-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- #float_format=i128
- float_format=i64
;;
-sparc-*-linux*aout*) # Sparc's running GNU/Linux, a.out
+sparc-*-linux*aout*) # SPARC's running GNU/Linux, a.out
tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
gnu_ld=yes
;;
-sparc-*-linux*libc1*) # Sparc's running GNU/Linux, libc5
+sparc-*-linux*libc1*) # SPARC's running GNU/Linux, libc5
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
- float_format=sparc
;;
-sparc-*-linux*) # Sparc's running GNU/Linux, libc6
+sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- float_format=sparc
;;
sparc-*-lynxos*)
if test x$gas = xyes
fi
tmake_file=sparc/t-sunos41
;;
-sparc-*-rtemsaout*)
- xm_defines=POSIX
- tmake_file="sparc/t-sparcbare t-rtems"
- tm_file="${tm_file} aoutos.h sparc/aout.h sparc/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
+sparc-*-rtemsaout*) # would otherwise be caught by sparc-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
;;
-sparc-*-rtems*|sparc-*-rtemself*)
+sparc-*-rtems*)
xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- #float_format=i128
- float_format=i64
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
fi
tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- float_format=i128
if test x${enable_threads} = x ; then
enable_threads=$have_pthread_h
if test x${enable_threads} = x ; then
thread_file='solaris'
fi
fi
+ need_64bit_hwint=yes
;;
sparc-hal-solaris2*)
xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/hal.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/hal.h"
tmake_file="sparc/t-halos sparc/t-sol2 sparc/t-crtfm"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h"
tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
- float_format=i128
thread_file='solaris'
;;
sparc-*-solaris2*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h"
fi
tm_file="${tm_file} sparc/sol2-gas-bi.h"
fi
tmake_file="$tmake_file sparc/t-sol2-64"
+ need_64bit_hwint=yes
;;
esac
xm_defines=POSIX
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- float_format=i128
if test x${enable_threads} = x; then
enable_threads=$have_pthread_h
if test x${enable_threads} = x; then
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
;;
-sparc-*-vxsim*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/vxsim.h"
- tmake_file=sparc/t-vxsparc
- ;;
sparclet-*-aout*)
tm_file="${tm_file} aoutos.h sparc/aout.h sparc/splet.h libgloss.h"
tmake_file=sparc/t-splet
tmake_file=sparc/t-sparclite
;;
sparclite-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
tmake_file="sparc/t-sparclite sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
;;
tmake_file=sparc/t-sp86x
;;
sparc86x-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
tmake_file="sparc/t-sp86x sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
;;
tm_file="sparc/sparc.h aoutos.h sparc/aout.h sparc/sp64-aout.h"
;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
tmake_file="${tmake_file} sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
;;
x) with_cpu=ultrasparc ;;
*) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
esac
+ need_64bit_hwint=yes
;;
-sparc64-*-linux*) # 64-bit Sparc's running GNU/Linux
+sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- float_format=sparc
;;
sparc64-*-netbsd*)
tmake_file="${tmake_file} sparc/t-netbsd64"
tm_file="sparc/biarch64.h ${tm_file}"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
- float_format=sparc
;;
strongarm-*-elf*)
tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
tmake_file=arm/t-strongarm-elf
out_file=arm/arm.c
md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
;;
strongarm-*-coff*)
tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h"
tmake_file=arm/t-strongarm-coff
out_file=arm/arm.c
md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
;;
strongarm-*-pe)
tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
tmake_file=arm/t-strongarm-pe
out_file=arm/arm.c
md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
extra_objs=pe.o
;;
thumb*-*-*)
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
;;
+v850e-*-*)
+ target_cpu_default="TARGET_CPU_v850e"
+ tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
+ tm_p_file=v850/v850-protos.h
+ tmake_file=v850/t-v850
+ md_file=v850/v850.md
+ out_file=v850/v850.c
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ ;;
v850-*-*)
target_cpu_default="TARGET_CPU_generic"
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
cxx_target_objs="v850-c.o"
;;
vax-*-bsd*) # VAXen running BSD
+ tm_file="${tm_file} vax/bsd.h"
use_collect2=yes
- float_format=vax
;;
vax-*-sysv*) # VAXen running system V
tm_file="${tm_file} vax/vaxv.h"
xm_defines=POSIX
- float_format=vax
;;
vax-*-netbsdelf*)
- echo "GCC does not yet support the ${machine} target"; exit 1
+ tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
+ float_format=vax
;;
vax-*-netbsd*)
tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
tmake_file=t-netbsd
- float_format=vax
+ extra_parts=""
use_collect2=yes
;;
vax-*-openbsd*)
tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
- float_format=vax
use_collect2=yes
;;
vax-*-ultrix*) # VAXen running ultrix
tm_file="${tm_file} vax/ultrix.h"
- float_format=vax
;;
vax-*-vms*) # VAXen running VMS
- xm_file=vax/xm-vms.h
- tm_file=vax/vms.h
- float_format=vax
+ echo "Configuration $machine no longer supported" 1>&2
+ exit 1
;;
vax-*-*) # VAX default entry
- float_format=vax
- ;;
-we32k-att-sysv*)
- xm_defines=POSIX
- use_collect2=yes
;;
xscale-*-elf)
tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
tmake_file=arm/t-xscale-elf
out_file=arm/arm.c
md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
;;
xscale-*-coff)
tm_file="arm/semi.h arm/aout.h arm/coff.h arm/xscale-coff.h arm/arm.h"
tmake_file=arm/t-xscale-coff
out_file=arm/arm.c
md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
;;
xtensa-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
- with_newlib=yes
- tmake_file=xtensa/t-xtensa
- extra_parts="crtbegin.o crtend.o"
- fixincludes=Makefile.in # newlib headers should be OK
+ tmake_file="xtensa/t-xtensa xtensa/t-elf"
;;
xtensa-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
- tmake_file="t-linux xtensa/t-xtensa"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ tmake_file="t-linux xtensa/t-xtensa xtensa/t-linux"
;;
*)
- echo "Configuration $machine not supported" 1>&2
+ echo "*** Configuration $machine not supported" 1>&2
exit 1
;;
esac
k6-*)
target_cpu_default2=TARGET_CPU_DEFAULT_k6
;;
- pentium_mmx-*)
+ pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx
;;
*)
;;
i686-*-* | i786-*-*)
case $target_alias in
+ k8-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_k8
+ ;;
athlon_xp-*|athlon_mp-*|athlon_4-*)
target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
;;
# We should have hammer chip here, but it does not exist yet and
# thus it is not supported. Athlon_SSE is probably equivalent feature
# wise to hammer from our point of view except for 64bit mode.
- target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
+ target_cpu_default2=TARGET_CPU_DEFAULT_k8
;;
alpha*-*-*)
case $machine in
then
target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
fi
+ case $machine in
+ hppa1* | parisc1*)
+ tm_defines="TARGET_SCHED_DEFAULT=\\\"7100LC\\\""
+ ;;
+ esac
;;
-
-mips*-*-ecoff* | mips*-*-elf*)
- if test x$gas = xyes
- then
- if test x$gnu_ld = xyes
+mips*-*-*)
+ case $machine in
+ mips*-*-ecoff* | mips*-*-elf*)
+ if test x$gas = xyes
+ then
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
+ else
+ target_cpu_default2="MASK_GAS"
+ fi
+ fi
+ ;;
+ mips*-*-*)
+ if test x$gas = xyes
then
- target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
- else
target_cpu_default2="MASK_GAS"
fi
- fi
- ;;
-mips*-*-*)
- if test x$gas = xyes
+ ;;
+ esac
+ case $machine in
+ mips*el-*-*)
+ tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
+ ;;
+ esac
+ case $tm_file in
+ *mips/elf.h* | *mips/elf64.h*)
+ tm_defines="OBJECT_FORMAT_ELF $tm_defines"
+ ;;
+ esac
+ if test "x$enable_gofast" = xyes
then
- target_cpu_default2="MASK_GAS"
+ tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
+ tm_file="gofast.h $tm_file"
+ tmake_file="mips/t-gofast $tmake_file"
+ else
+ tmake_file="mips/t-mips $tmake_file"
fi
;;
powerpc*-*-* | rs6000-*-*)
x401 | x403 | x405 | xec603e | x801 | x821 | x823 | x860)
target_cpu_default2="\\\"$with_cpu\\\""
- tm_file="$tm_file rs6000/softfloat.h"
;;
xyes | xno)
fi
;;
esac
- case $machine in
- *-*-darwin*)
- ;;
- *)
- c_target_objs="rs6000-c.o"
- cxx_target_objs="rs6000-c.o"
- tmake_file="${tmake_file} rs6000/t-rs6000-c-rule"
- ;;
- esac
+ out_file=rs6000/rs6000.c
+ c_target_objs="${c_target_objs} rs6000-c.o"
+ cxx_target_objs="${cxx_target_objs} rs6000-c.o"
+ tmake_file="rs6000/t-rs6000 ${tmake_file}"
;;
sparc*-*-*)
case ".$with_cpu" in
;;
esac
;;
+v850*-*-*)
+ case "x$with_cpu" in
+ x)
+ ;;
+ xv850e)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+ *)
+ if test x$pass2done = xyes
+ then
+ echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+ ;;
esac
if test "$target_cpu_default2" != ""
OSDN Git Service
