# GCC target-specific configuration file.
-# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+# 2008, 2009 Free Software Foundation, Inc.
#This file is part of GCC.
#GCC is free software; you can redistribute it and/or modify it under
#the terms of the GNU General Public License as published by the Free
-#Software Foundation; either version 2, or (at your option) any later
+#Software Foundation; either version 3, or (at your option) any later
#version.
#GCC is distributed in the hope that it will be useful, but WITHOUT
#for more details.
#You should have received a copy of the GNU General Public License
-#along with GCC; see the file COPYING. If not, write to the Free
-#Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-#02110-1301, USA.
+#along with GCC; see the file COPYING3. If not see
+#<http://www.gnu.org/licenses/>.
# This is the GCC target-specific configuration file
# where a configuration type is mapped to different system-specific
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
#
+# It is possible to include automatically-generated
+# build-directory files by prefixing them with "./".
+# All other files should relative to $srcdir/config.
+#
# tm_p_file Location of file with declarations for functions
# in $out_file.
#
# extra_headers List of used header files from the directory
# config/${cpu_type}.
#
+# use_gcc_tgmath If set, add tgmath.h to the list of used header
+# files.
+#
+# use_gcc_stdint If "wrap", install a version of stdint.h that
+# wraps the system's copy for hosted compilations;
+# if "provide", provide a version of systems without
+# such a system header; otherwise "none", do not
+# provide such a header at all.
+#
# extra_passes List of extra executables compiled for this target
# machine, used for compiling from source to object.
#
# cxx_target_objs List of extra target-dependent objects that be
# linked into the C++ compiler only.
#
+# fortran_target_objs List of extra target-dependent objects that be
+# linked into the fortran compiler only.
+#
# target_gtfiles List of extra source files with type information.
#
# xm_defines List of macros to define when compiling for the
# system normally uses GNU as.
#
# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
-# for this target. This is true iff this target
-# supports "long" or "wchar_t" wider than 32 bits.
+# for this target. This is true if this target
+# supports "long" or "wchar_t" wider than 32 bits,
+# or BITS_PER_WORD is wider than 32 bits.
+# The setting made here must match the one made in
+# other locations such as libcpp/configure.ac
#
# configure_default_options
# Set to an initializer for configure_default_options
# in configargs.h, based on --with-cpu et cetera.
-#
-# use_fixproto Set to "yes" if fixproto should be run normally,
-# "no" if fixproto should never be run.
# The following variables are used in each case-construct to build up the
# outgoing variables:
out_file=
tmake_file=
extra_headers=
+use_gcc_tgmath=yes
+use_gcc_stdint=none
extra_passes=
extra_parts=
extra_programs=
extra_options=
c_target_objs=
cxx_target_objs=
+fortran_target_objs=
tm_defines=
xm_defines=
# Set this to force installation and use of collect2.
target_gtfiles=
need_64bit_hwint=
-# Default to not using fixproto. Targets which need fixproto should
-# specifically set this to 'yes'.
-use_fixproto=no
-
# Don't carry these over build->host->target. Please.
xm_file=
md_file=
# Obsolete configurations.
-case ${target} in
- c4x-* \
- | tic4x-* \
- )
- if test "x$enable_obsolete" != xyes; then
- echo "*** Configuration ${target} is obsolete." >&2
- echo "*** Specify --enable-obsolete to build it anyway." >&2
- echo "*** Support will be REMOVED in the next major release of GCC," >&2
- echo "*** unless a maintainer comes forward." >&2
- exit 1
- fi;;
-esac
+#case ${target} in
+# )
+# if test "x$enable_obsolete" != xyes; then
+# echo "*** Configuration ${target} is obsolete." >&2
+# echo "*** Specify --enable-obsolete to build it anyway." >&2
+# echo "*** Support will be REMOVED in the next major release of GCC," >&2
+# echo "*** unless a maintainer comes forward." >&2
+# exit 1
+# fi;;
+#esac
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
# should be in alphabetical order.
case ${target} in
- alpha*-*-linux*libc1* \
- | i[34567]86-sequent-sysv \
- | i[34567]86-sequent-sysv[123]* \
- | i[34567]86-go32-* \
+ i[34567]86-go32-* \
| i[34567]86-*-go32* \
- | m68k-*-linux*aout* \
- | m68k-*-linux*libc1* \
| mips64orion*-*-rtems* \
- | powerpc-*-linux*libc1* \
- | sparc-*-linux*aout* \
- | sparc-*-linux*libc1* \
+ | pdp11-*-bsd \
| sparc-hal-solaris2* \
| thumb-*-* \
+ | *-*-linux*aout* \
| *-*-linux*coff* \
+ | *-*-linux*libc1* \
| *-*-linux*oldld* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
+ | *-*-solaris2.[0-6] \
+ | *-*-solaris2.[0-6].* \
+ | *-*-sysv* \
| vax-*-vms* \
)
echo "*** Configuration ${target} not supported" 1>&2
am33_2.0-*-linux*)
cpu_type=mn10300
;;
-strongarm*-*-*)
- cpu_type=arm
- ;;
arm*-*-*)
cpu_type=arm
- extra_headers="mmintrin.h"
+ extra_headers="mmintrin.h arm_neon.h"
+ c_target_objs="arm-c.o"
+ cxx_target_objs="arm-c.o"
;;
bfin*-*)
cpu_type=bfin
;;
-ep9312*-*-*)
- cpu_type=arm
+crisv32-*)
+ cpu_type=cris
;;
frv*) cpu_type=frv
;;
-xscale-*-*)
- cpu_type=arm
- extra_headers="mmintrin.h"
- ;;
+fido-*-*)
+ cpu_type=m68k
+ extra_headers=math-68881.h
+ ;;
i[34567]86-*-*)
cpu_type=i386
- extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
- pmmintrin.h tmmintrin.h ammintrin.h"
+ c_target_objs="i386-c.o"
+ cxx_target_objs="i386-c.o"
+ extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+ nmmintrin.h bmmintrin.h mmintrin-common.h
+ wmmintrin.h immintrin.h x86intrin.h avxintrin.h
+ cross-stdarg.h"
;;
x86_64-*-*)
cpu_type=i386
- extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
- pmmintrin.h tmmintrin.h ammintrin.h"
+ c_target_objs="i386-c.o"
+ cxx_target_objs="i386-c.o"
+ extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+ nmmintrin.h bmmintrin.h mmintrin-common.h
+ wmmintrin.h immintrin.h x86intrin.h avxintrin.h
+ cross-stdarg.h"
need_64bit_hwint=yes
;;
ia64-*-*)
extra_headers=ia64intrin.h
need_64bit_hwint=yes
;;
-hppa*-*-* | parisc*-*-*)
+hppa*-*-*)
cpu_type=pa
;;
m32r*-*-*)
cpu_type=m32r
;;
-m680[012]0-*-*)
- cpu_type=m68k
- extra_headers=math-68881.h
- ;;
m68k-*-*)
extra_headers=math-68881.h
;;
mips*-*-*)
cpu_type=mips
need_64bit_hwint=yes
+ extra_headers="loongson.h"
;;
+picochip-*-*)
+ cpu_type=picochip
+ ;;
powerpc*-*-*)
cpu_type=rs6000
- extra_headers="ppc-asm.h altivec.h spe.h"
+ extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
need_64bit_hwint=yes
case x$with_cpu in
- xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
+ xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell)
cpu_is_64bit=yes
;;
esac
score*-*-*)
cpu_type=score
;;
-sparc64*-*-*)
- cpu_type=sparc
- need_64bit_hwint=yes
- ;;
sparc*-*-*)
cpu_type=sparc
+ need_64bit_hwint=yes
;;
spu*-*-*)
cpu_type=spu
need_64bit_hwint=yes
;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
-sh[123456789lbe]*-*-*)
+sh[123456789lbe]*-*-* | sh-*-*)
cpu_type=sh
need_64bit_hwint=yes
;;
-tic4x-*-*)
- cpu_type=c4x
- ;;
esac
tm_file=${cpu_type}/${cpu_type}.h
fi
case ${target} in
+i[34567]86-w64-*)
+ tm_file="i386/biarch32.h ${tm_file}"
+ ;;
+esac
+
+case ${target} in
+i[34567]86-*-*)
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
+ tm_file="vxworks-dummy.h ${tm_file}"
+ ;;
x86_64-*-*)
tm_file="i386/biarch64.h ${tm_file}"
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
+ tm_file="vxworks-dummy.h ${tm_file}"
;;
esac
*-*-darwin*)
tm_file="${tm_file} darwin.h"
case ${target} in
- *-*-darwin9*)
+ *-*-darwin[912]*)
tm_file="${tm_file} darwin9.h"
;;
esac
tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
target_gtfiles="\$(srcdir)/config/darwin.c"
extra_options="${extra_options} darwin.opt"
- c_target_objs="darwin-c.o"
- cxx_target_objs="darwin-c.o"
+ c_target_objs="${c_target_objs} darwin-c.o"
+ cxx_target_objs="${cxx_target_objs} darwin-c.o"
+ fortran_target_objs="darwin-f.o"
extra_objs="darwin.o"
+ extra_gcc_objs="darwin-driver.o"
default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
gas=yes
gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- case ${target} in
- *-*-freebsd3 | *-*-freebsd[3].*)
- tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
- *-*-freebsd4 | *-*-freebsd[4].*)
- tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
- *-*-freebsd5 | *-*-freebsd[5].*)
- tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
- *-*-freebsd6 | *-*-freebsd[6].*)
- tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
- *-*-freebsd7 | *-*-freebsd[7].*)
- tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
- *-*-freebsd8 | *-*-freebsd[8].*)
- tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
- *-*-freebsd9 | *-*-freebsd[9].*)
- tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
- *)
- echo 'Please update *-*-freebsd* in gcc/config.gcc'
- exit 1
- ;;
- esac
+ fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
+ tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
tmake_file="t-slibgcc-elf-ver t-freebsd"
case ${enable_threads} in
no)
exit 1
;;
esac
- fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
- ;;
-*-*-linux*libc1* | *-*-linux*aout*)
- # Avoid the generic linux case.
+ fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
+ use_gcc_stdint=wrap
;;
-*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
- # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
+*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- extra_options="${extra_options} linux.opt"
gas=yes
gnu_ld=yes
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
tmake_file="t-slibgcc-elf-ver t-linux"
+ case $target in
+ *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
+ :;;
+ *-*-gnu*)
+ tmake_file="$tmake_file t-gnu";;
+ esac
+ # glibc / uclibc switch. uclibc isn't usable for GNU/Hurd and neither for
+ # GNU/k*BSD.
+ case $target in
+ *linux*)
+ extra_options="$extra_options linux.opt";;
+ *)
+ tm_defines="$tm_defines OPTION_GLIBC=1";;
+ esac
case ${target} in
*-*-*uclibc*)
tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
esac
# Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
default_use_cxa_atexit=yes
- ;;
-*-*-gnu*)
- # On the Hurd, the setup is just about the same on
- # each different CPU. The specific machines that we
- # support are matched above and just set $cpu_type.
- tm_file="${cpu_type}/gnu.h"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- # GNU tools are the only tools.
- gas=yes
- gnu_ld=yes
- # These details are the same as for Linux.
- # But here we need a little extra magic.
- tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
- case ${target} in
- alpha*)
- tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
- ;;
- i[34567]86-*-*)
- tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
- ;;
- esac
- # Assume that glibc is being used and so __cxa_atexit is provided.
- default_use_cxa_atexit=yes
+ use_gcc_tgmath=no
+ use_gcc_stdint=wrap
;;
*-*-netbsd*)
tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
case ${enable_threads} in
yes) thread_file='rtems' ;;
esac
+ use_gcc_stdint=wrap
+ ;;
+*-*-uclinux*)
+ use_gcc_stdint=wrap
;;
*-*-vxworks*)
tmake_file=t-vxworks
- tm_file="${tm_file} elfos.h svr4.h"
xm_defines=POSIX
extra_options="${extra_options} vxworks.opt"
+ extra_objs=vxworks.o
case ${enable_threads} in
no) ;;
"" | yes | vxworks) thread_file='vxworks' ;;
*-*-elf)
# Assume that newlib is being used and so __cxa_atexit is provided.
default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
;;
esac
then tmake_file=${cpu_type}/t-$rest
fi
;;
-alpha*-*-unicosmk*)
- use_collect2=yes
- tm_file="${tm_file} alpha/unicosmk.h"
-
- # Don't include t-ieee for now because we don't support that yet
- # tmake_file="alpha/t-ieee"
- tmake_file="alpha/t-unicosmk"
- use_fixproto=yes
- ;;
alpha*-*-linux*)
- tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
+ tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
;;
alpha*-*-gnu*)
+ tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
;;
local_prefix=/gnu
;;
arc-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
extra_parts="crtinit.o crtfini.o"
- use_fixproto=yes
- ;;
-arm-*-coff* | armel-*-coff*)
- tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
- tmake_file="arm/t-arm arm/t-arm-coff"
- ;;
-arm-semi-aof | armel-semi-aof)
- tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-semi"
;;
arm-wrs-vxworks)
- tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
+ tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
;;
-arm*-*-freebsd*|strongarm*-*-freebsd*)
+arm*-*-freebsd*)
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
;;
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ case $target in
+ arm*b-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
tmake_file="${tmake_file} t-linux arm/t-arm"
case ${target} in
arm*-*-linux-*eabi)
;;
esac
tm_file="$tm_file arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-uclinux*) # ARM ucLinux
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
tmake_file="arm/t-arm arm/t-arm-elf"
case ${target} in
- arm*-*-uclinux-*eabi)
+ arm*-*-uclinux*eabi)
tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
tmake_file="$tmake_file arm/t-bpabi"
# The BPABI long long divmod functions return a 128-bit value in
default_use_cxa_atexit=yes
esac
tm_file="$tm_file arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-ecos-elf)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
tmake_file="arm/t-arm arm/t-arm-elf"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-eabi* | arm*-*-symbianelf* )
# The BPABI long long divmod functions return a 128-bit value in
tmake_file="arm/t-arm arm/t-arm-elf"
case ${target} in
arm*-*-eabi*)
+ tm_file="$tm_file arm/eabi.h newlib-stdint.h"
tmake_file="${tmake_file} arm/t-bpabi"
+ extra_options="${extra_options} arm/eabi.opt"
+ use_gcc_stdint=wrap
;;
arm*-*-symbianelf*)
tm_file="${tm_file} arm/symbian.h"
;;
esac
tm_file="${tm_file} arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-rtems*)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
-arm*-*-elf | ep9312-*-elf)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
+arm*-*-elf)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
tmake_file="arm/t-arm arm/t-arm-elf"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-wince-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
extra_objs="pe.o"
;;
arm-*-pe*)
- tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
tmake_file="arm/t-arm arm/t-pe"
+ use_gcc_stdint=wrap
extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
-arm*-*-kaos*)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
- tmake_file="arm/t-arm arm/t-arm-elf"
- ;;
avr-*-rtems*)
- tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
+ tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
tmake_file="avr/t-avr t-rtems avr/t-rtems"
;;
avr-*-*)
- tm_file="avr/avr.h dbxelf.h"
- use_fixproto=yes
+ tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
+ use_gcc_stdint=wrap
;;
bfin*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
- tmake_file=bfin/t-bfin-elf
- use_collect2=no
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ tmake_file=bfin/t-bfin-elf
+ use_collect2=no
+ ;;
bfin*-uclinux*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
- tmake_file=bfin/t-bfin-elf
- use_collect2=no
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
+ tmake_file=bfin/t-bfin-uclinux
+ tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
+ extra_options="${extra_options} linux.opt"
+ use_collect2=no
+ ;;
+bfin*-linux-uclibc*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
+ tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ use_collect2=no
+ ;;
bfin*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
- ;;
+ ;;
bfin*-*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
- tmake_file=bfin/t-bfin
- use_collect2=no
- ;;
-c4x-*-rtems* | tic4x-*-rtems*)
- tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
- tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
-c4x-* | tic4x-*)
- tmake_file=c4x/t-c4x
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
-cris-*-aout)
- tm_file="dbxelf.h ${tm_file} cris/aout.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ tmake_file=bfin/t-bfin
+ use_collect2=no
+ use_gcc_stdint=wrap
+ ;;
+crisv32-*-elf | crisv32-*-none)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="cris/t-cris"
+ target_cpu_default=32
gas=yes
- tmake_file="cris/t-cris cris/t-aout"
- extra_options="${extra_options} cris/aout.opt"
+ extra_options="${extra_options} cris/elf.opt"
+ use_gcc_stdint=wrap
;;
cris-*-elf | cris-*-none)
- tm_file="dbxelf.h elfos.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
tmake_file="cris/t-cris cris/t-elfmulti"
gas=yes
extra_options="${extra_options} cris/elf.opt"
+ use_gcc_stdint=wrap
;;
-cris-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
+crisv32-*-linux* | cris-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
# We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
extra_options="${extra_options} cris/linux.opt"
+ case $target in
+ cris-*-*)
+ target_cpu_default=10
+ ;;
+ crisv32-*-*)
+ target_cpu_default=32
+ ;;
+ esac
;;
crx-*-elf)
- tm_file="elfos.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
extra_parts="crtbegin.o crtend.o"
use_collect2=no
;;
fr30-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
tmake_file=fr30/t-fr30
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- use_fixproto=yes
;;
frv-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
tmake_file=frv/t-frv
- use_fixproto=yes
;;
frv-*-*linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
- linux.h frv/linux.h frv/frv-abi.h"
+ linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
-h8300-*-rtemscoff*)
- tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
- tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
- ;;
h8300-*-rtems*)
tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
- tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
+ tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
;;
h8300-*-elf*)
tmake_file="h8300/t-h8300 h8300/t-elf"
- tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
- use_fixproto=yes
+ tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
;;
-h8300-*-*)
- tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
- use_fixproto=yes
- ;;
-hppa*64*-*-linux* | parisc*64*-*-linux*)
+hppa*64*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
- pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
+ glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
+ pa/pa64-linux.h"
tmake_file="${tmake_file} pa/t-linux64"
gas=yes gnu_ld=yes
need_64bit_hwint=yes
;;
-hppa*-*-linux* | parisc*-*-linux*)
+hppa*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-linux"
# Set the libgcc version number
#hppa*-*-openbsd*)
# target_cpu_default="MASK_PA_11"
# ;;
-hppa1.1-*-pro*)
- target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
- pa/pa-pro-end.h libgloss.h"
- tmake_file="pa/t-pro"
- ;;
-hppa1.1-*-osf*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
- tmake_file="pa/t-pa"
- use_collect2=yes
- ;;
-hppa1.1-*-bsd*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
- tmake_file="pa/t-pa"
- use_collect2=yes
- ;;
hppa[12]*-*-hpux10*)
case ${target} in
hppa1.1-*-* | hppa2*-*-*)
tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
fi
use_collect2=yes
- use_fixproto=yes
gas=yes
;;
hppa*64*-*-hpux11*)
;;
esac
gas=yes
+ case ${target} in
+ *-*-hpux11.[01]*)
+ use_gcc_stdint=provide
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ *-*-hpux11.[23]*)
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ esac
;;
hppa[12]*-*-hpux11*)
case ${target} in
esac
use_collect2=yes
gas=yes
+ case ${target} in
+ *-*-hpux11.[01]*)
+ use_gcc_stdint=provide
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ *-*-hpux11.[23]*)
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ esac
;;
i[34567]86-*-darwin*)
need_64bit_hwint=yes
# config.guess deciding that the configuration is i386-*-darwin* and
# then this file using that to set --with-cpu=i386 which has no -m64
# support.
- with_arch=${with_arch:-nocona}
with_cpu=${with_cpu:-generic}
+ tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
;;
x86_64-*-darwin*)
- with_arch=${with_arch:-nocona}
with_cpu=${with_cpu:-generic}
- tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
+ tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
tm_file="${tm_file} ${cpu_type}/darwin64.h"
;;
i[34567]86-*-elf*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
- tmake_file="i386/t-i386elf t-svr4"
- use_fixproto=yes
- ;;
-i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} usegas.h"
- fi
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
-i[34567]86-*-aout*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
- use_fixproto=yes
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
+ tmake_file="${tmake_file} i386/t-i386elf t-svr4"
;;
-i[34567]86-*-beoself* | i[34567]86-*-beos*)
- tmake_file='i386/t-beos i386/t-crtpic'
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
- extra_parts='crtbegin.o crtend.o'
+x86_64-*-elf*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
+ tmake_file="${tmake_file} i386/t-i386elf t-svr4"
;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
x86_64-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
+ tmake_file="${tmake_file} i386/t-crtstuff"
;;
i[34567]86-*-netbsdelf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
;;
i[34567]86-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
- tmake_file=t-netbsd
+ tmake_file="${tmake_file} t-netbsd"
extra_parts=""
use_collect2=yes
;;
x86_64-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
+ tmake_file="${tmake_file} i386/t-crtstuff"
;;
i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
# needed to unconfuse gdb
- tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
+ tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
gas=yes
gnu_ld=yes
;;
-i[34567]86-*-coff*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
- use_fixproto=yes
- ;;
-i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
+i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
# Intel 80386's running GNU/*
# with ELF format using glibc 2
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
case ${target} in
i[34567]86-*-linux*)
if test x$enable_targets = xall; then
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="${tmake_file} i386/t-linux64"
need_64bit_hwint=yes
- # FIXME: -m64 for i[34567]86-*-* should be allowed just
- # like -m32 for x86_64-*-*.
case X"${with_cpu}" in
- Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xk8|Xopteron|Xathlon64|Xathlon-fx)
+ Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
;;
X)
- with_cpu=generic
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=generic
+ fi
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic core2 nocona x86-64 amdfam10 k8 opteron athlon64 athlon-fx" 1>&2
+ echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
exit 1
;;
esac
;;
i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
+ i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
+ i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
esac
- tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
+ tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
i386/x86-64.h i386/linux64.h"
case ${target} in
x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
esac
- tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
- ;;
-i[34567]86-*-gnu*)
+ tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
;;
i[34567]86-pc-msdosdjgpp*)
xm_file=i386/xm-djgpp.h
tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
- tmake_file=i386/t-djgpp
+ tmake_file="${tmake_file} i386/t-djgpp"
extra_options="${extra_options} i386/djgpp.opt"
gnu_ld=yes
gas=yes
i[34567]86-*-lynxos*)
xm_defines=POSIX
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
- tmake_file="i386/t-crtstuff t-lynx"
+ tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_options="${extra_options} lynx.opt"
thread_file=lynx
;;
i[3456x]86-*-netware*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
- tmake_file=i386/t-netware
+ tmake_file="${tmake_file} i386/t-netware"
extra_objs=netware.o
case /${with_ld} in
*/nwld)
;;
i[34567]86-*-nto-qnx*)
tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
- tmake_file=i386/t-nto
+ tmake_file="${tmake_file} i386/t-nto"
gnu_ld=yes
gas=yes
;;
i[34567]86-*-rtems*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
extra_parts="crtbegin.o crtend.o crti.o crtn.o"
- tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
- ;;
-i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
- if test x$gas = xyes
- then
- tm_file="usegas.h ${tm_file}"
- fi
- tmake_file=i386/t-sco5
- extra_parts="crtbegin.o crtend.o"
- extra_options="${extra_options} i386/sco5.opt"
- use_fixproto=yes
+ tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
;;
i[34567]86-*-solaris2*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- tm_file="${tm_file} sol2-6.h"
- ;;
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
;;
esac
tm_file="${tm_file} i386/sol2.h"
- tmake_file="t-sol2 i386/t-sol2 t-svr4"
- c_target_objs="sol2-c.o"
- cxx_target_objs="sol2-c.o"
+ tmake_file="${tmake_file} t-sol2 t-svr4"
+ c_target_objs="${c_target_objs} sol2-c.o"
+ cxx_target_objs="${cxx_target_objs} sol2-c.o"
extra_objs="sol2.o"
tm_p_file="${tm_p_file} sol2-protos.h"
if test x$gnu_ld = xyes; then
if test x$gas = xyes; then
tm_file="usegas.h ${tm_file}"
fi
- case ${target} in
- *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
- tm_file="$tm_file tm-dwarf2.h"
- ;;
- esac
+ tm_file="$tm_file tm-dwarf2.h"
case ${target} in
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="$tmake_file i386/t-sol2-10"
+ # i386/t-crtstuff only affects libgcc. Its inclusion
+ # depends on a runtime test and is thus performed in
+ # libgcc/configure.ac instead.
need_64bit_hwint=yes
- # FIXME: -m64 for i[34567]86-*-* should be allowed just
- # like -m32 for x86_64-*-*.
+ use_gcc_stdint=wrap
case X"${with_cpu}" in
- Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xk8|Xopteron|Xathlon64|Xathlon-fx)
+ Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
;;
X)
- with_cpu=generic
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=generic
+ fi
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic core2 nocona x86-64 amdfam10 k8 opteron athlon64 athlon-fx" 1>&2
+ echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
exit 1
;;
esac
- # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
- # part of the base system.
- extra_parts="gmon.o crtbegin.o crtend.o"
;;
*)
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
+ use_gcc_stdint=provide
;;
esac
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
"":yes:* | yes:yes:* )
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- thread_file=posix95
- ;;
- *)
- thread_file=posix
- ;;
- esac
+ thread_file=posix
;;
"":*:yes | yes:*:yes )
thread_file=solaris
;;
esac
;;
-i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-crtpic t-svr4"
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- use_fixproto=yes
- ;;
-i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-crtpic t-svr4"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
- tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
case ${target} in
*-vxworksae*)
- tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
+ tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
;;
*)
- tm_file="${tm_file} vxworks.h i386/vxworks.h"
+ tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
tmake_file="${tmake_file} i386/t-vxworks"
;;
esac
;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
- tmake_file="i386/t-cygwin i386/t-cygming"
+ # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
+ if test x$sjlj = x0; then
+ tmake_eh_file="i386/t-dw2-eh"
+ else
+ tmake_eh_file="i386/t-sjlj-eh"
+ fi
+ tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
extra_objs="winnt.o winnt-stubs.o"
- c_target_objs=cygwin2.o
- cxx_target_objs="cygwin2.o winnt-cxx.o"
+ c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
+ cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
extra_gcc_objs=cygwin1.o
if test x$enable_threads = xyes; then
thread_file='posix'
fi
+ use_gcc_stdint=wrap
;;
-i[34567]86-*-mingw32*)
+i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
xm_file=i386/xm-mingw32.h
- tmake_file="i386/t-cygming i386/t-mingw32"
+ # This makes the logic if mingw's or the w64 feature set has to be used
+ case ${target} in
+ *-w64-*)
+ tm_file="${tm_file} i386/mingw-w64.h"
+ tmake_file="${tmake_file} i386/t-mingw-w64"
+ ;;
+ *)
+ tmake_file="${tmake_file} i386/t-mingw32"
+ ;;
+ esac
+ tm_file="${tm_file} i386/mingw-stdint.h"
+ # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
+ if test x$sjlj = x0; then
+ tmake_eh_file="i386/t-dw2-eh"
+ else
+ tmake_eh_file="i386/t-sjlj-eh"
+ fi
+ tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
- extra_options="${extra_options} i386/cygming.opt"
+ extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
+ case ${target} in
+ *-w64-*)
+ extra_options="${extra_options} i386/mingw-w64.opt"
+ ;;
+ *)
+ ;;
+ esac
extra_objs="winnt.o winnt-stubs.o"
- cxx_target_objs=winnt-cxx.o
+ c_target_objs="${c_target_objs} msformat-c.o"
+ cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
case ${enable_threads} in
- "" | yes | win32)
- thread_file='win32'
+ "" | yes | win32) thread_file='win32'
tmake_file="${tmake_file} i386/t-gthr-win32"
;;
esac
case ${target} in
- *mingw32crt*)
- tm_file="${tm_file} i386/crtdll.h"
+ x86_64-*-mingw*)
+ tmake_file="${tmake_file} i386/t-crtfm"
;;
- *mingw32msv* | *mingw32*)
+ *)
+ ;;
+ esac
+ case ${target} in
+ *mingw32crt*)
+ tm_file="${tm_file} i386/crtdll.h"
+ ;;
+ *mingw32msv* | *mingw*)
;;
esac
- ;;
-i[34567]86-*-uwin*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
- tmake_file="i386/t-cygwin i386/t-uwin"
- extra_objs=winnt.o
- extra_options="${extra_options} i386/cygming.opt"
- target_gtfiles="\$(srcdir)/config/i386/winnt.c"
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- use_fixproto=yes
;;
i[34567]86-*-interix3*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
- tmake_file="i386/t-interix"
+ tmake_file="${tmake_file} i386/t-interix"
extra_objs=winnt.o
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
if test x$enable_threads = xyes ; then
tm_file="${tm_file} dbxcoff.h"
fi
;;
-i[34567]86-*-kaos*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
- tmake_file="i386/t-i386elf t-svr4"
- ;;
ia64*-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
target_cpu_default="0"
if test x$gas = xyes
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
- use_fixproto=yes
;;
ia64*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
;;
ia64*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
if test x$with_system_libunwind != xyes ; then
tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
c_target_objs="ia64-c.o"
cxx_target_objs="ia64-c.o"
extra_options="${extra_options} ia64/ilp32.opt"
- # If we decide to run fixproto we should define FIXPROTO_DEFINES
- # in ia64/t-hpux, and also fix the definition of putenv in
- # sys-protos.h (const char not char).
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
;;
iq2000*-*-elf*)
- tm_file="svr4.h elfos.h iq2000/iq2000.h"
+ tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
tmake_file=iq2000/t-iq2000
out_file=iq2000/iq2000.c
md_file=iq2000/iq2000.md
- use_fixproto=yes
;;
m32r-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
extra_parts="crtinit.o crtfini.o"
- use_fixproto=yes
;;
m32rle-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
- use_fixproto=yes
;;
+m32r-*-rtems*)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="m32r/t-m32r t-rtems"
+ extra_parts="crtinit.o crtfini.o"
+ ;;
m32r-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
+ tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
- use_fixproto=yes
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
m32rle-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
+ tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
- use_fixproto=yes
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
- tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
tm_p_file="m68hc11/m68hc11-protos.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
- use_fixproto=yes
+ tmake_file="m68hc11/t-m68hc11"
+ use_gcc_stdint=wrap
;;
m68hc12-*-*|m6812-*-*)
- tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
tm_p_file="m68hc11/m68hc11-protos.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
+ tmake_file="m68hc11/t-m68hc11"
extra_options="${extra_options} m68hc11/m68hc11.opt"
- use_fixproto=yes
+ use_gcc_stdint=wrap
;;
-m68k-*-aout*)
- default_m68k_cpu=68020
- default_cf_cpu=5206
- tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
- ;;
-m68k-*-coff*)
- default_m68k_cpu=68020
- default_cf_cpu=5206
- tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
- use_fixproto=yes
- ;;
-m68020-*-elf* | m68k-*-elf*)
- default_m68k_cpu=68020
- default_cf_cpu=5206
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
- tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf m68k/t-mlibs"
+m68k-*-elf* | fido-*-elf*)
+ case ${target} in
+ fido-*-elf*)
+ # Check that $with_cpu makes sense.
+ case $with_cpu in
+ "" | "fidoa")
+ ;;
+ *)
+ echo "Cannot accept --with-cpu=$with_cpu"
+ exit 1
+ ;;
+ esac
+ with_cpu=fidoa
+ ;;
+ *)
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ ;;
+ esac
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
+ # Add multilibs for targets other than fido.
+ case ${target} in
+ fido-*-elf*)
+ ;;
+ *)
+ tmake_file="$tmake_file m68k/t-mlibs"
+ ;;
+ esac
extra_parts="crtbegin.o crtend.o"
;;
-m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
+m68k*-*-netbsdelf*)
default_m68k_cpu=68020
default_cf_cpu=5475
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tm_defines="${tm_defines} MOTOROLA=1"
;;
m68k*-*-openbsd*)
default_m68k_cpu=68020
# m68k-elf-based ABI
default_m68k_cpu=68020
default_cf_cpu=5206
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
+ tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-uclinux"
- use_fixproto=no
;;
m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
# with uClibc, using the new GNU/Linux-style
# ABI.
default_m68k_cpu=68020
default_cf_cpu=5206
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+ tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
extra_options="${extra_options} linux.opt"
tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
- use_fixproto=no
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
default_m68k_cpu=68020
default_cf_cpu=5475
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
+ with_arch=${with_arch:-m68k}
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/ieee.opt"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
# if not configured with --enable-sjlj-exceptions, bump the
# libgcc version number
if test x$sjlj != x1; then
default_m68k_cpu=68020
default_cf_cpu=5206
tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
- tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
+ tm_defines="${tm_defines} MOTOROLA=1"
extra_parts="crtbegin.o crtend.o"
;;
mcore-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
tmake_file=mcore/t-mcore
- use_fixproto=yes
+ inhibit_libc=true
;;
mcore-*-pe*)
- tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
+ tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
tmake_file=mcore/t-mcore-pe
- use_fixproto=yes
+ inhibit_libc=true
+ use_gcc_stdint=wrap
;;
mips-sgi-irix[56]*)
tm_file="elfos.h ${tm_file} mips/iris.h"
then
tm_defines="${tm_defines} IRIX_USING_GNU_LD"
fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- use_fixproto=yes
+ case ${enable_threads}:${have_pthread_h} in
+ "":yes | yes:yes ) thread_file=posix ;;
+ esac
;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
target_cpu_default="MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
;;
-mips64*-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
- tmake_file="${tmake_file} mips/t-linux64"
+mips64*-*-linux* | mipsisa64*-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
+ tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
+ case ${target} in
+ mips64el-st-linux-gnu)
+ tm_file="${tm_file} mips/st.h"
+ tmake_file="${tmake_file} mips/t-st"
+ ;;
+ mips64octeon*-*-linux*)
+ tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
+ target_cpu_default=MASK_SOFT_FLOAT_ABI
+ ;;
+ mipsisa64r2*-*-linux*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
+ ;;
+ esac
gnu_ld=yes
gas=yes
+ test x$with_llsc != x || with_llsc=yes
;;
mips*-*-linux*) # Linux MIPS, either endian.
- tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
+ tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
+ tmake_file="${tmake_file} mips/t-libgcc-mips16"
case ${target} in
- mipsisa32*-*)
- target_cpu_default="MASK_SOFT_FLOAT"
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
+ mipsisa32r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
;;
+ mipsisa32*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
esac
+ test x$with_llsc != x || with_llsc=yes
;;
mips*-*-openbsd*)
tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
*) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
esac
;;
-mipsisa32-*-elf* | mipsisa32el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
- ;;
-mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
- ;;
-mipsisa64-*-elf* | mipsisa64el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- target_cpu_default="MASK_64BIT|MASK_FLOAT64"
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
+mips*-sde-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
+ tmake_file="mips/t-sde mips/t-libgcc-mips16"
+ case "${with_newlib}" in
+ yes)
+ # newlib / libgloss.
+ ;;
+ *)
+ # MIPS toolkit libraries.
+ tm_file="$tm_file mips/sdemtk.h"
+ tmake_file="$tmake_file mips/t-sdemtk"
+ extra_options="$extra_options mips/sdemtk.opt"
+ case ${enable_threads} in
+ "" | yes | mipssde)
+ thread_file='mipssde'
+ ;;
+ esac
+ ;;
+ esac
+ case ${target} in
+ mipsisa32r2*)
+ tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa32*)
+ tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa64r2*)
+ tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ mipsisa64*)
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ esac
+ ;;
+mipsisa32-*-elf* | mipsisa32el-*-elf* | \
+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
+mipsisa64-*-elf* | mipsisa64el-*-elf* | \
+mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
+ case ${target} in
+ mipsisa32r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
+ ;;
+ mipsisa32*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
+ ;;
+ mipsisa64r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
+ ;;
+ mipsisa64*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
+ ;;
+ esac
+ case ${target} in
+ mipsisa32*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ mipsisa64*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ *-*-elf*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
+ esac
;;
mipsisa64sr71k-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file=mips/t-sr71k
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file="mips/t-elf mips/t-sb1"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
- use_fixproto=yes
;;
mips-*-elf* | mipsel-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
- use_fixproto=yes
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
;;
mips64-*-elf* | mips64el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
- use_fixproto=yes
;;
mips64vr-*-elf* | mips64vrel-*-elf*)
- tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
tmake_file=mips/t-vr
- use_fixproto=yes
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
- tmake_file=mips/t-elf
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
- use_fixproto=yes
;;
mips*-*-rtems*)
- tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
- tmake_file="mips/t-elf t-rtems mips/t-rtems"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
;;
mips-wrs-vxworks)
- # We want vxworks.h after mips/elf.h, which unfortunately means we
- # have to redo the tm_file list from scratch.
- tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
+ tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
tmake_file="${tmake_file} mips/t-vxworks"
;;
-mips-wrs-windiss) # Instruction-level simulator for VxWorks.
- xm_defines=POSIX
- tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
- tmake_file="${tmake_file} mips/t-elf"
- thread_file=
- ;;
mipstx39-*-elf* | mipstx39el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
- tmake_file=mips/t-r3900
- use_fixproto=yes
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
+ tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
;;
mmix-knuth-mmixware)
+ tm_file="${tm_file} newlib-stdint.h"
need_64bit_hwint=yes
+ use_gcc_stdint=wrap
;;
mn10300-*-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
use_collect2=no
- use_fixproto=yes
- ;;
-mt-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- tmake_file="${tmake_file} mt/t-mt"
- ;;
-ns32k-*-netbsdelf*)
- echo "GCC does not yet support the ${target} target"; exit 1
+ use_gcc_stdint=wrap
;;
-ns32k-*-netbsd*)
- tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file="t-netbsd ns32k/t-ns32k"
- extra_parts=""
- use_collect2=yes
- ;;
-pdp11-*-bsd)
- tm_file="${tm_file} pdp11/2bsd.h"
- use_fixproto=yes
- ;;
pdp11-*-*)
- use_fixproto=yes
+ tm_file="${tm_file} newlib-stdint.h"
+ use_gcc_stdint=wrap
;;
+picochip-*)
+ tm_file="${tm_file} newlib-stdint.h"
+ use_gcc_stdint=wrap
+ ;;
# port not yet contributed
#powerpc-*-openbsd*)
# tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
# extra_headers=
# ;;
-powerpc64-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- test x$with_cpu != x || cpu_is_64bit=yes
- test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
- tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
- if test x${enable_secureplt} = xyes; then
- tm_file="rs6000/secureplt.h ${tm_file}"
- fi
- extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
- tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
- ;;
-powerpc64-*-gnu*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
- extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
- tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
- ;;
-powerpc-*-beos*)
- tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
- extra_headers=
- use_fixproto=yes
- ;;
powerpc-*-darwin*)
extra_options="${extra_options} rs6000/darwin.opt"
extra_parts="crt2.o"
tmake_file="${tmake_file} rs6000/t-netbsd"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
-powerpc-*-chorusos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- case ${enable_threads} in
- yes | posix)
- thread_file='posix'
- ;;
- esac
- use_fixproto=yes
- ;;
powerpc-*-eabispe*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-spe rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
;;
powerpc-*-eabisimaltivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
;;
powerpc-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
;;
powerpc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- use_fixproto=yes
;;
powerpc-*-eabialtivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
+ ;;
+powerpc-xilinx-eabi*)
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
+ use_gcc_stdint=wrap
;;
powerpc-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
;;
powerpc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
-powerpc-*-linux*altivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
- extra_options="${extra_options} rs6000/sysv4.opt"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
- ;;
-powerpc-*-linux*spe*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
- extra_options="${extra_options} rs6000/sysv4.opt"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
- ;;
-powerpc-*-linux*)
+powerpc-*-linux* | powerpc64-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
- tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
- case ${enable_targets}:${cpu_is_64bit} in
- *powerpc64* | all:* | *:yes)
+ tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ maybe_biarch=yes
+ case ${target} in
+ powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
+ echo "*** Configuration ${target} not supported" 1>&2
+ exit 1
+ ;;
+ powerpc-*-linux*spe* | powerpc-*-linux*paired*)
+ maybe_biarch=
+ ;;
+ powerpc64-*-linux*)
+ test x$with_cpu != x || cpu_is_64bit=yes
+ maybe_biarch=always
+ ;;
+ esac
+ case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
+ always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
if test x$cpu_is_64bit = xyes; then
tm_file="${tm_file} rs6000/default64.h"
fi
- tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
tmake_file="$tmake_file rs6000/t-linux64"
extra_options="${extra_options} rs6000/linux64.opt"
;;
*)
- tm_file="${tm_file} rs6000/linux.h"
+ tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
;;
esac
+ tmake_file="${tmake_file} rs6000/t-fprules-softfp soft-fp/t-softfp"
+ case ${target} in
+ powerpc*-*-linux*altivec*)
+ tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
+ powerpc*-*-linux*spe*)
+ tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
+ powerpc*-*-linux*paired*)
+ tm_file="${tm_file} rs6000/750cl.h" ;;
+ esac
if test x${enable_secureplt} = xyes; then
tm_file="rs6000/secureplt.h ${tm_file}"
fi
;;
+powerpc64-*-gnu*)
+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
+ tmake_file="t-slibgcc-elf-ver t-gnu"
+ ;;
powerpc-*-gnu-gnualtivec*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
fi
;;
powerpc-*-gnu*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
if test x$enable_threads = xyes; then
fi
;;
powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
- # We want vxworks.h after rs6000/sysv4.h, which unfortunately
- # means we have to redo the tm_file list from scratch.
- tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
extra_options="${extra_options} rs6000/sysv4.opt"
extra_headers=ppc-asm.h
;;
esac
;;
-powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
- tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- thread_file=""
- use_fixproto=yes
- ;;
powerpc-*-lynxos*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
gnu_ld=yes
gas=yes
;;
-powerpcle-*-sysv*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- use_fixproto=yes
- ;;
powerpcle-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
- use_fixproto=yes
;;
powerpcle-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
+ use_gcc_stdint=wrap
;;
powerpcle-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- ;;
-powerpc-*-kaos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- ;;
-powerpcle-*-kaos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
- ;;
-rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
- tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
- extra_options="${extra_options} rs6000/aix41.opt"
- use_collect2=yes
- extra_headers=
- use_fixproto=yes
+ use_gcc_stdint=wrap
;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
- tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
tmake_file=rs6000/t-aix43
extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
+ use_gcc_stdint=provide
extra_headers=
;;
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
- tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
extra_options="${extra_options} rs6000/aix64.opt"
tmake_file=rs6000/t-aix43
use_collect2=yes
thread_file='aix'
+ use_gcc_stdint=wrap
extra_headers=
;;
-rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
- tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
+rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
tmake_file=rs6000/t-aix52
extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
+ use_gcc_stdint=wrap
extra_headers=
;;
+rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
+ tmake_file=rs6000/t-aix52
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ use_gcc_stdint=wrap
+ extra_headers=altivec.h
+ ;;
+rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
+ tmake_file=rs6000/t-aix52
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ use_gcc_stdint=wrap
+ extra_headers=altivec.h
+ ;;
s390-*-linux*)
- tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
+ tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
;;
s390x-*-linux*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
tm_p_file=s390/s390-protos.h
md_file=s390/s390.md
extra_modes=s390/s390-modes.def
extra_options="${extra_options} s390/tpf.opt"
;;
score-*-elf)
- tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
+ tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
tmake_file=score/t-score-elf
- extra_objs="score-mdaux.o"
+ extra_objs="score7.o score3.o"
;;
-sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
+sh-*-elf* | sh[12346l]*-*-elf* | \
sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
- sh-*-linux* | sh[346lbe]*-*-linux* | \
+ sh-*-linux* | sh[2346lbe]*-*-linux* | \
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
sh64-*-netbsd* | sh64l*-*-netbsd*)
tmake_file="${tmake_file} sh/t-sh sh/t-elf"
*) with_endian=big,little ;;
esac
fi
+ # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
+ # First word : the default endian.
+ # Second word: the secondary endian (optional).
case ${with_endian} in
- big|little) tmake_file="${tmake_file} sh/t-1e" ;;
- big,little|little,big) ;;
+ big) TM_ENDIAN_CONFIG=mb ;;
+ little) TM_ENDIAN_CONFIG=ml ;;
+ big,little) TM_ENDIAN_CONFIG="mb ml" ;;
+ little,big) TM_ENDIAN_CONFIG="ml mb" ;;
*) echo "with_endian=${with_endian} not supported."; exit 1 ;;
esac
case ${with_endian} in
tm_file="${tm_file} sh/elf.h"
case ${target} in
sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
- tm_file="${tm_file} linux.h sh/linux.h" ;;
- sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
- ;;
+ tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
sh*-superh-elf) if test x$with_libgloss != xno; then
with_libgloss=yes
extra_objs="symbian.o"
extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
;;
+ *-*-elf*)
+ tm_file="${tm_file} newlib-stdint.h"
+ ;;
esac
# sed el/eb endian suffixes away to avoid confusion with sh[23]e
case `echo ${target} | sed 's/e[lb]-/-/'` in
sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
- sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
+ sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
sh3e | sh3 | sh2e | sh2 | sh1) ;;
"") sh_cpu_default=${sh_cpu_target} ;;
*) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
esac
sh_multilibs=${with_multilib_list}
- if test x${sh_multilibs} = x ; then
+ if test "$sh_multilibs" = "default" ; then
case ${target} in
sh64-superh-linux* | \
sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
fi
target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
- sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
+ tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
+ sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^sh/m/i' -e 's/ sh/ m/gi' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
for sh_multilib in ${sh_multilibs}; do
case ${sh_multilib} in
- sh1 | sh2 | sh2e | sh3 | sh3e | \
- sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
- sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
- sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
- sh5-64media | sh5-64media-nofpu | \
- sh5-32media | sh5-32media-nofpu | \
- sh5-compact | sh5-compact-nofpu)
- tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
- tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
+ m1 | m2 | m2e | m3 | m3e | \
+ m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
+ m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
+ m2a | m2a-single | m2a-single-only | m2a-nofpu | \
+ m5-64media | m5-64media-nofpu | \
+ m5-32media | m5-32media-nofpu | \
+ m5-compact | m5-compact-nofpu)
+ # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
+ # It is passed to MULTIILIB_OPTIONS verbatim.
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
+ tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
;;
+ \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
+ # It is passed the MULTILIB_EXCEPTIONS verbatim.
+ TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
*)
echo "with_multilib_list=${sh_multilib} not supported."
exit 1
;;
esac
done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
if test x${enable_incomplete_targets} = xyes ; then
tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
fi
- use_fixproto=yes
- ;;
-sh-*-rtemscoff*)
- tmake_file="sh/t-sh t-rtems sh/t-rtems"
- tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
+ tm_file="$tm_file ./sysroot-suffix.h"
+ tmake_file="$tmake_file t-sysroot-suffix"
;;
sh-*-rtems*)
tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
;;
sh-wrs-vxworks)
tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
- ;;
-sh-*-*)
- tm_file="${tm_file} dbxcoff.h sh/coff.h"
- use_fixproto=yes
+ tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
;;
sparc-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
with_cpu=ultrasparc
;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
tmake_file="sparc/t-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- use_fixproto=yes
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
- tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-linux"
+ if test x$enable_targets = xall; then
+ tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
+ tmake_file="${tmake_file} sparc/t-linux64"
+ else
+ tm_file="${tm_file} sparc/linux.h"
+ fi
+ tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
case ${target} in
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
+ use_gcc_stdint=wrap
+ ;;
+ *)
+ use_gcc_stdint=provide
;;
esac
tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
"":yes:* | yes:yes:* ) thread_file=posix ;;
"":*:yes | yes:*:yes ) thread_file=solaris ;;
esac
- need_64bit_hwint=yes
;;
sparc-*-solaris2*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- tm_file="${tm_file} sol2-6.h"
- ;;
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
+ use_gcc_stdint=wrap
+ ;;
+ *)
+ use_gcc_stdint=provide
;;
esac
tm_file="${tm_file} sparc/sol2.h"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- if test x$gnu_ld = xno; then
- tm_file="${tm_file} sparc/sol26-sld.h"
- fi
- ;;
- *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld-bi.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
- fi
- tm_file="${tm_file} tm-dwarf2.h"
- tmake_file="$tmake_file sparc/t-sol2-64"
- need_64bit_hwint=yes
- test x$with_cpu != x || with_cpu=v9
- ;;
- esac
+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld-bi.h"
+ fi
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ fi
+ tm_file="${tm_file} tm-dwarf2.h"
+ tmake_file="$tmake_file sparc/t-sol2-64"
+ test x$with_cpu != x || with_cpu=v9
c_target_objs="sol2-c.o"
cxx_target_objs="sol2-c.o"
extra_objs="sol2.o"
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
"":yes:* | yes:yes:* )
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- thread_file=posix95
- ;;
- *)
- thread_file=posix
- ;;
- esac
+ thread_file=posix
;;
"":*:yes | yes:*:yes )
thread_file=solaris
;;
esac
;;
-sparc-*-sysv4*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
+sparc-wrs-vxworks)
+ tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+ tmake_file="${tmake_file} sparc/t-vxworks"
;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
extra_options="${extra_options} sparc/little-endian.opt"
tmake_file="${tmake_file} sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
x) with_cpu=ultrasparc ;;
*) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
esac
- need_64bit_hwint=yes
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
;;
tmake_file="${tmake_file} sparc/t-netbsd64"
;;
spu-*-elf*)
- tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
+ tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
tmake_file="spu/t-spu-elf"
extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
extra_modes=spu/spu-modes.def
c_target_objs="${c_target_objs} spu-c.o"
cxx_target_objs="${cxx_target_objs} spu-c.o"
;;
-strongarm-*-elf*)
- tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-strongarm-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
-strongarm-*-pe)
- tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
- tmake_file="arm/t-arm arm/t-strongarm-pe"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- extra_options="${extra_options} arm/pe.opt"
- extra_objs=pe.o
- use_fixproto=yes
- ;;
-strongarm-*-kaos*)
- tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
- tmake_file="arm/t-arm arm/t-strongarm-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
v850e1-*-*)
target_cpu_default="TARGET_CPU_v850e1"
- tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
tm_p_file=v850/v850-protos.h
tmake_file=v850/t-v850e
md_file=v850/v850.md
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
- use_fixproto=yes
+ use_gcc_stdint=wrap
;;
v850e-*-*)
target_cpu_default="TARGET_CPU_v850e"
- tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
tm_p_file=v850/v850-protos.h
tmake_file=v850/t-v850e
md_file=v850/v850.md
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
- use_fixproto=yes
+ use_gcc_stdint=wrap
;;
v850-*-*)
target_cpu_default="TARGET_CPU_generic"
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
tmake_file=v850/t-v850
if test x$stabs = xyes
then
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
- use_fixproto=yes
- ;;
-vax-*-bsd*) # VAXen running BSD
- tm_file="${tm_file} vax/bsd.h"
- tmake_file=vax/t-memfuncs
- use_collect2=yes
- use_fixproto=yes
+ use_gcc_stdint=wrap
;;
-vax-*-sysv*) # VAXen running system V
- tm_file="${tm_file} vax/vaxv.h"
- tmake_file=vax/t-memfuncs
- use_fixproto=yes
+vax-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
;;
vax-*-netbsdelf*)
tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
use_collect2=yes
;;
-vax-*-ultrix*) # VAXen running ultrix
- tm_file="${tm_file} vax/ultrix.h"
- tmake_file=vax/t-memfuncs
- use_fixproto=yes
- ;;
-xscale-*-elf)
- tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-xscale-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
-xscale-*-coff)
- tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-xscale-coff"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
- tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
tm_p_file=stormy16/stormy16-protos.h
md_file=stormy16/stormy16.md
out_file=stormy16/stormy16.c
extra_options=stormy16/stormy16.opt
tmake_file="stormy16/t-stormy16"
extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
;;
-xtensa-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
+xtensa*-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
tmake_file="xtensa/t-xtensa xtensa/t-elf"
;;
-xtensa-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
+xtensa*-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
;;
am33_2.0-*-linux*)
- tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
+ tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
tmake_file="${tmake_file} mn10300/t-linux"
gas=yes gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
;;
+m32c-*-rtems*)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} t-rtems"
+ c_target_objs="m32c-pragma.o"
+ cxx_target_objs="m32c-pragma.o"
+ ;;
m32c-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
c_target_objs="m32c-pragma.o"
cxx_target_objs="m32c-pragma.o"
- use_fixproto=yes
;;
*)
echo "*** Configuration ${target} not supported" 1>&2
esac
case ${target} in
-i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
- tmake_file="${tmake_file} i386/t-gmm_malloc"
- ;;
i[34567]86-*-linux* | x86_64-*-linux*)
- tmake_file="${tmake_file} i386/t-pmm_malloc"
+ tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
;;
i[34567]86-*-* | x86_64-*-*)
- tmake_file="${tmake_file} i386/t-gmm_malloc"
+ tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
;;
+powerpc*-*-* | rs6000-*-*)
+ tm_file="${tm_file} rs6000/option-defaults.h"
esac
# Support for --with-cpu and related options (and a few unrelated options,
# This block sets nothing except for with_cpu.
if test x$with_cpu = x ; then
case ${target} in
- ep9312-*-*)
- # A Cirrus ARM variant.
- with_cpu="ep9312"
- ;;
i386-*-*)
with_cpu=i386
;;
;;
i686-*-* | i786-*-*)
case ${target_noncanonical} in
- amdfam10-*)
+ amdfam10-*|barcelona-*)
with_cpu=amdfam10
;;
k8-*|opteron-*|athlon_64-*)
;;
x86_64-*-*)
case ${target_noncanonical} in
- amdfam10-*)
+ amdfam10-*|barcelona-*)
with_cpu=amdfam10
;;
k8-*|opteron-*|athlon_64-*)
frv550-*-*linux*)
with_cpu=fr550
;;
- m680[012]0-*-*)
- with_cpu=`echo ${target} | sed 's/-.*$//'`
- ;;
m68k*-*-*)
case "$with_arch" in
"cf")
;;
esac
;;
+ mips*-*-vxworks)
+ with_arch=mips2
+ ;;
sparc*-*-*)
with_cpu="`echo ${target} | sed 's/-.*$//'`"
;;
esac
-fi
-# Similarly for --with-float
-if test x$with_float = x; then
- case ${target} in
- ep9312-*-*)
- with_float=hard
- ;;
- esac
+ # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
+ case ${target} in
+ i[34567]86-*-*|x86_64-*-*)
+ if test x$with_cpu != x; then
+ if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
+ if test x$with_cpu_32 = x; then
+ with_cpu_32=$with_cpu
+ fi
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=$with_cpu
+ fi
+ with_cpu=
+ fi
+ fi
+ ;;
+ esac
fi
# Similarly for --with-schedule.
if test x$with_schedule = x; then
case ${target} in
- hppa1* | parisc1*)
+ hppa1*)
# Override default PA8000 scheduling model.
with_schedule=7100LC
;;
case "$with_arch" in
"" \
| armv[23456] | armv2a | armv3m | armv4t | armv5t \
- | armv5te | armv6j |armv6k | armv6z | armv6zk \
+ | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
+ | armv7 | armv7-a | armv7-r | armv7-m \
| iwmmxt | ep9312)
# OK
;;
case "$with_fpu" in
"" \
- | fpa | fpe2 | fpe3 | maverick | vfp )
+ | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
# OK
;;
*)
case "$with_abi" in
"" \
- | apcs-gnu | atpcs | aapcs | iwmmxt )
+ | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
#OK
;;
*)
esac
;;
- m680[012]0-*-* | m68k*-*-*)
+ fido-*-* | m68k*-*-*)
supported_defaults="arch cpu"
case "$with_arch" in
"" | "m68k"| "cf")
esac
;;
- hppa*-*-* | parisc*-*-*)
+ hppa*-*-*)
supported_defaults="arch schedule"
case "$with_arch" in
;;
i[34567]86-*-* | x86_64-*-*)
- supported_defaults="arch cpu tune"
- for which in arch cpu tune; do
+ supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
+ for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
eval "val=\$with_$which"
case ${val} in
i386 | i486 \
| prescott | pentium-m | pentium4m | pentium3m)
case "${target}" in
x86_64-*-*)
- echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
- exit 1
+ case "x$which" in
+ *_32)
+ ;;
+ *)
+ echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
+ exit 1
+ ;;
+ esac
;;
esac
# OK
;;
- "" | amdfam10 | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
+ "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | atom | generic)
# OK
;;
*)
;;
mips*-*-*)
- supported_defaults="abi arch float tune divide"
+ supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt"
case ${with_float} in
"" | soft | hard)
*)
echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
exit 1
+ ;;
esac
- ;;
-
- mt-*-*)
- supported_defaults="arch"
- case "$with_arch" in
- "" \
- | ms1-64-001 \
- | ms1-16-002 \
- | ms1-16-003 \
- | ms2 \
- | "")
+ case ${with_llsc} in
+ yes)
+ with_llsc=llsc
+ ;;
+ no)
+ with_llsc="no-llsc"
+ ;;
+ "")
# OK
;;
*)
- echo "Unknown arch used in --with-arch=$with_arch" 1>&2
+ echo "Unknown llsc type used in --with-llsc" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_mips_plt} in
+ yes)
+ with_mips_plt=plt
+ ;;
+ no)
+ with_mips_plt=no-plt
+ ;;
+ "")
+ ;;
+ *)
+ echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
exit 1
;;
esac
;;
powerpc*-*-* | rs6000-*-*)
- supported_defaults="cpu float tune"
+ supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
- for which in cpu tune; do
+ for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
eval "val=\$with_$which"
case ${val} in
default32 | default64)
+ case $which in
+ cpu | tune)
+ ;;
+ *)
+ echo "$val only valid for --with-cpu and --with-tune." 1>&2
+ exit 1
+ ;;
+ esac
with_which="with_$which"
eval $with_which=
;;
eval "with_$which=405"
;;
"" | common \
- | power | power[23456] | power6x | powerpc | powerpc64 \
+ | power | power[234567] | power6x | powerpc | powerpc64 \
| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
- | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
- | 601 | 602 | 603 | 603e | ec603e | 604 \
+ | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
+ | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \
| 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
- | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
+ | e300c[23] | 854[08] | e500mc \
+ | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
# OK
;;
*)
for which in arch tune; do
eval "val=\$with_$which"
case ${val} in
- "" | g5 | g6 | z900 | z990 | z9-109)
+ "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
# OK
;;
*)
"" | sparc | sparcv9 | sparc64 | sparc86x \
| v7 | cypress | v8 | supersparc | sparclite | f930 \
| f934 | hypersparc | sparclite86x | sparclet | tsc701 \
- | v9 | ultrasparc | ultrasparc3 | niagara)
+ | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
# OK
;;
*)
esac
;;
+ spu-*-*)
+ supported_defaults="arch tune"
+
+ for which in arch tune; do
+ eval "val=\$with_$which"
+ case ${val} in
+ "" | cell | celledp)
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+
v850*-*-*)
supported_defaults=cpu
case ${with_cpu} in
fi
;;
- hppa*-*-* | parisc*-*-*)
+ hppa*-*-*)
target_cpu_default2="MASK_BIG_SWITCH"
if test x$gas = xyes
then
fi
;;
- m680[012]0-*-* | m68k*-*-*)
+ fido*-*-* | m68k*-*-*)
target_cpu_default2=$m68k_cpu_ident
if [ x"$m68k_arch_family" != x ]; then
tmake_file="m68k/t-$m68k_arch_family $tmake_file"
fi
;;
+ i[34567]86-*-darwin* | x86_64-*-darwin*)
+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
+ ;;
+ i[34567]86-*-linux* | x86_64-*-linux* | i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
+ ;;
+ i[34567]86-*-cygwin*)
+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
+ ;;
+ ia64*-*-linux*)
+ tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
+ ;;
+
mips*-*-*)
if test x$gnu_ld = xyes
then
esac
t=
-all_defaults="abi cpu arch tune schedule float mode fpu divide"
+all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt"
for option in $all_defaults
do
- eval "val=\$with_$option"
+ eval "val=\$with_"`echo $option | sed s/-/_/g`
if test -n "$val"; then
case " $supported_defaults " in
*" $option "*)