#
# with_* Various variables as set by configure.
#
-# enable_threads_flag Either the name, yes or no depending on whether
+# enable_threads Either the name, yes or no depending on whether
# threads support was requested.
#
# default_use_cxa_atexit
# configure entries modify them.
gas="$gas_flag"
gnu_ld="$gnu_ld_flag"
-enable_threads=$enable_threads_flag
default_use_cxa_atexit=no
target_gtfiles=
need_64bit_hwint=
# Common parts for widely ported systems.
case ${target} in
*-*-darwin*)
+ case ${target} in
+ *-darwin[0-6]*) ;;
+ *) tm_file="${tm_file} darwin7.h" ;;
+ esac
tm_file="${tm_file} darwin.h"
tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file="t-darwin"
+ tmake_file="t-darwin t-slibgcc-darwin"
target_gtfiles="\$(srcdir)/config/darwin.c"
c_target_objs="darwin-c.o"
cxx_target_objs="darwin-c.o"
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
+ tmake_file="t-slibgcc-elf-ver t-linux"
;;
*-*-gnu*)
# On the Hurd, the setup is just about the same on
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
;;
alpha*-*-gnu*)
target_cpu_default="MASK_GAS"
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
- tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
+ tmake_file="${tmake_file} arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
;;
;;
cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
+ # We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
;;
fr30-*-elf)
frv-*-*linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
linux.h frv/linux.h frv/frv-abi.h"
- tmake_file="t-slibgcc-elf-ver t-linux frv/t-frv frv/t-linux"
+ tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
h8300-*-rtems*)
tmake_file="h8300/t-h8300 t-rtems"
target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_BIG_SWITCH)"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux64"
+ tmake_file="${tmake_file} pa/t-linux64"
gas=yes gnu_ld=yes
need_64bit_hwint=yes
;;
target_cpu_default="(MASK_PA_11 | MASK_NO_SPACE_REGS | MASK_BIG_SWITCH)"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
+ tmake_file="${tmake_file} pa/t-linux"
# if not configured with --enable-sjlj-exceptions, bump the
# libgcc version number
if test x$sjlj != x1; then
target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- case x${enable_threads} in
- xyes | xdce)
- tmake_file="${tmake_file} pa/t-dce-thr"
- ;;
+ case ${enable_threads} in
+ "")
+ if test x$have_pthread_h = xyes ; then
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ fi
+ ;;
+ yes | dce)
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
esac
use_collect2=yes
use_fixproto=yes
hppa1.0-*-hpux10*)
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- case x${enable_threads} in
- xyes | xdce)
- tmake_file="${tmake_file} pa/t-dce-thr"
- ;;
+ case ${enable_threads} in
+ "")
+ if test x$have_pthread_h = xyes ; then
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ fi
+ ;;
+ yes | dce)
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
esac
use_collect2=yes
use_fixproto=yes
# with ELF format using glibc 2
# aka GNU/Linux C library 6
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
+ tmake_file="${tmake_file} i386/t-crtstuff"
;;
x86_64-*-linux*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
i386/x86-64.h i386/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
+ tmake_file="${tmake_file} i386/t-linux64"
;;
i[34567]86-*-kfreebsd*-gnu) # must be before i[34567]86-*-gnu*
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h kfreebsdgnu.h i386/kfreebsdgnu.h"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
+ case ${target} in
+ *-*-solaris2.[789] | *-*-solaris2.1[0-9])
+ tm_file="$tm_file tm-dwarf2.h"
+ ;;
+ esac
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
+ no:*:*) ;;
+ *:yes:* ) thread_file=posix ;;
+ yes:*:* | *:*:yes ) thread_file=solaris ;;
+ esac
;;
i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
;;
ia64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
+ tmake_file="${tmake_file} ia64/t-ia64 ia64/t-glibc"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
if test x"$use_libunwind_exceptions" = xyes; then
m32r-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ # We override the tmake_file for linux -- why?
tmake_file="m32r/t-linux"
gnu_ld=yes
use_fixproto=yes
m32rle-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ # We override the tmake_file for linux -- why?
tmake_file="m32r/t-linux"
gnu_ld=yes
use_fixproto=yes
# aka the GNU/Linux C library 6.
tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
tm_defines="MOTOROLA USE_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux"
# if not configured with --enable-sjlj-exceptions, bump the
# libgcc version number
if test x$sjlj != x1; then
;;
mips64*-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux64"
+ tmake_file="${tmake_file} mips/t-linux64"
# This default ABI is a partial lie: t-linux64 overrides the
# DRIVER_SELF_SPEC that sets the default abi, in the spec file
tm_defines="MIPS_ISA_DEFAULT=32"
;;
esac
- tmake_file="t-slibgcc-elf-ver t-linux"
;;
mips*-*-openbsd*)
tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
;;
mips64vr-*-elf* | mips64vrel-*-elf*)
tm_file="mips/vr.h ${tm_file} mips/elf64.h"
- tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1"
tmake_file=mips/t-vr
use_fixproto=yes
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
tm_file="${tm_file} mips/elforion.h mips/elf64.h"
tmake_file=mips/t-elf
- tmake_file=mips/t-elf
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";;
esac
tm_file="${tm_file} rs6000/linux64.h"
- tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-ppccomm rs6000/t-linux64"
+ tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
;;
powerpc64-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
;;
powerpc-*-darwin*)
tm_file="${tm_file} rs6000/darwin.h"
- tmake_file="t-darwin t-slibgcc-darwin rs6000/t-darwin"
+ tmake_file="${tmake_file} rs6000/t-darwin"
extra_headers=altivec.h
;;
powerpc*-*-freebsd*)
;;
powerpc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
- tmake_file="rs6000/t-fprules t-rtems rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
powerpc-*-linux*altivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*spe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-gnu-gnualtivec*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff"
+ tmake_file="${tmake_file} s390/t-crtstuff"
;;
s390x-*-linux*)
tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
md_file=s390/s390.md
extra_modes=s390/s390-modes.def
out_file=s390/s390.c
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
+ tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
;;
s390x-ibm-tpf*)
tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
esac
use_fixproto=yes
;;
-sh-*-rtemself*)
- tmake_file="sh/t-sh sh/t-elf t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
- ;;
-sh-*-rtems*)
+sh-*-rtemscoff*)
tmake_file="sh/t-sh t-rtems"
tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
;;
+sh-*-rtems*)
+ tmake_file="sh/t-sh sh/t-elf t-rtems"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
+ ;;
sh-*-linux* | sh[2346lbe]*-*-linux*)
- tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux"
+ tmake_file="sh/t-sh sh/t-elf ${tmake_file}"
case ${target} in
sh*be-*-* | sh*eb-*-*) ;;
*)
tm_file="${tm_file} dbxcoff.h sh/coff.h"
use_fixproto=yes
;;
-sparc-tti-*)
- tm_file="${tm_file} sparc/pbd.h"
- use_fixproto=yes
- ;;
sparc-*-netbsdelf*)
tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
;;
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h tm-dwarf2.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
fi
tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- if test x${enable_threads} = x ; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x ; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes ; then
- if test x${have_pthread_h} = xyes ; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
+ no:*:*) ;;
+ *:yes:* ) thread_file=posix ;;
+ yes:*:* | *:*:yes ) thread_file=solaris ;;
+ esac
need_64bit_hwint=yes
;;
sparc-*-solaris2*)
fi
;;
*-*-solaris2.[789] | *-*-solaris2.1[0-9])
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld-bi.h"
fi
;;
esac
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
+ no:*:*) ;;
+ *:yes:* ) thread_file=posix ;;
+ yes:*:* | *:*:yes ) thread_file=solaris ;;
+ esac
;;
sparc-*-sysv4*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
need_64bit_hwint=yes
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
;;
sparc64-*-netbsd*)
;;
xtensa-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa xtensa/t-linux"
+ tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
;;
am33_2.0-*-linux*)
tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux mn10300/t-linux"
+ tmake_file="${tmake_file} mn10300/t-linux"
gas=yes gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
pentium2-*)
with_cpu=pentium2
;;
- pentium3-*)
+ pentium3-*|pentium3m-*)
with_cpu=pentium3
;;
- pentium4-*)
+ pentium4-*|pentium4m-*)
with_cpu=pentium4
;;
+ prescott-*)
+ with_cpu=prescott
+ ;;
+ nocona-*)
+ with_cpu=nocona
+ ;;
+ pentium_m-*)
+ with_cpu=pentium-m
+ ;;
*)
with_cpu=pentiumpro
;;
esac
fi
+# Similarly for --with-float
+if test x$with_float = x; then
+ case ${target} in
+ ep9312-*-*)
+ with_float=hard
+ ;;
+ esac
+fi
+
# Similarly for --with-schedule.
if test x$with_schedule = x; then
case ${target} in
;;
arm*-*-*)
- supported_defaults="arch cpu float tune fpu"
+ supported_defaults="arch cpu float tune fpu abi"
for which in cpu tune; do
+ # See if it matches any of the entries in arm-cores.def
eval "val=\$with_$which"
- case "$val" in
- "" \
- | arm[236789] | arm250 | arm[67][01]0 \
- | arm60 | arm620 | arm7d | arm7di \
- | arm7m | arm7dm | arm7dmi | arm[79]tdmi \
- | arm70 | arm700i | arm710t | arm720 \
- | arm720t | arm740t | arm710c | arm920 \
- | arm920t | arm926ejs | arm940t | arm9e | arm10tdmi \
- | arm7100 | arm7500 | arm7500fe | arm810 \
- | arm1026ejs | arm1020t | arm1136js | arm1136jfs \
- | xscale | iwmmxt \
- | ep9312 \
- | strongarm | strongarm110 | strongarm11[01]0)
- # OK
- ;;
- *)
- echo "Unknown CPU used in --with-$which=$val" 1>&2
- exit 1
- ;;
- esac
+ if [ x"$val" = x ] \
+ || grep "^ARM_CORE($val," \
+ ${srcdir}/config/arm/arm-cores.def \
+ > /dev/null; then
+ # Ok
+ true
+ else
+ echo "Unknown CPU used in --with-$which=$val" 1>&2
+ exit 1
+ fi
done
case "$with_arch" in
"" \
| armv[23456] | armv2a | armv3m | armv4t | armv5t \
- | armv5te | armv6j | ep9312)
+ | armv5te | armv6j | iwmmxt | ep9312)
# OK
;;
*)
# OK
;;
*)
- echo "Unknown fpu used in --with-fpu=$fpu" 2>&1
+ echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
+ exit 1
+ ;;
+ esac
+
+ case "$with_abi" in
+ "" \
+ | apcs-gnu | atpcs | aapcs | iwmmxt )
+ #OK
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi"
exit 1
;;
esac
if test "x$with_arch" != x && test "x$with_cpu" != x; then
- echo "Warning: --with-arch overrides --with-cpu" 1>&2
+ echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
fi
;;
esac
;;
+ m68k*-linux*)
+ supported_defaults="cpu"
+ case "$with_cpu" in
+ "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
+ # OK
+ ;;
+ *)
+ echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
+ echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
hppa*-*-* | parisc*-*-*)
supported_defaults="arch schedule"
| c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
| pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
| athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
- | athlon64 | athlon-fx)
+ | athlon64 | athlon-fx | prescott | pentium-m \
+ | pentium4m | pentium3m| nocona)
# OK
;;
*)
esac
;;
+ m68k*-linux*)
+ case "x$with_cpu" in
+ x)
+ # The most generic
+ target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68020)
+ target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68030)
+ target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68040)
+ target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68060)
+ target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68020-40)
+ target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
+ ;;
+ xm68020-60)
+ target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
+ ;;
+ *)
+ echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
hppa*-*-* | parisc*-*-*)
if test x$gas = xyes
then
;;
powerpc*-*-* | rs6000-*-*)
- if test x$enable_altivec = xyes
- then
- tm_file="$tm_file rs6000/altivec-defs.h"
- fi
# FIXME: The PowerPC port uses the value set at compile time,
# although it's only cosmetic.
if test "x$with_cpu" != x
OSDN Git Service
