* gcc.dg/vect/vect-116.c: Add vect_int target requirement.

[pf3gnuchains/gcc-fork.git] / gcc / config.gcc

diff --git a/gcc/config.gcc b/gcc/config.gcc
index 7cf3299..38ba1df 100644 (file)
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -265,6 +265,10 @@ ep9312*-*-*)
        ;;
 frv*)  cpu_type=frv
        ;;
+fido-*-*)
+       cpu_type=m68k
+       extra_headers=math-68881.h
+        ;;
 xscale-*-*)
        cpu_type=arm
        extra_headers="mmintrin.h"
@@ -272,12 +276,14 @@ xscale-*-*)
 i[34567]86-*-*)
        cpu_type=i386
        extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
-                      pmmintrin.h tmmintrin.h ammintrin.h"
+                      pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+                      nmmintrin.h"
        ;;
 x86_64-*-*)
        cpu_type=i386
        extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
-                      pmmintrin.h tmmintrin.h ammintrin.h"
+                      pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+                      nmmintrin.h"
        need_64bit_hwint=yes
        ;;
 ia64-*-*)
@@ -387,6 +393,7 @@ case ${target} in
   c_target_objs="darwin-c.o"
   cxx_target_objs="darwin-c.o"
   extra_objs="darwin.o"
+  extra_gcc_objs="darwin-driver.o"
   default_use_cxa_atexit=yes
   case ${enable_threads} in
     "" | yes | posix) thread_file='posix' ;;
@@ -569,7 +576,6 @@ case ${target} in
   ;;
 *-*-vxworks*)
   tmake_file=t-vxworks
-  tm_file="${tm_file} elfos.h svr4.h"
   xm_defines=POSIX
   extra_options="${extra_options} vxworks.opt"
   extra_objs=vxworks.o
@@ -694,7 +700,7 @@ arm-semi-aof | armel-semi-aof)
        tmake_file="arm/t-arm arm/t-semi"
        ;;
 arm-wrs-vxworks)
-       tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
+       tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
        tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
        ;;
 arm*-*-freebsd*|strongarm*-*-freebsd*)
@@ -1047,13 +1053,12 @@ i[34567]86-*-darwin*)
        # config.guess deciding that the configuration is i386-*-darwin* and
        # then this file using that to set --with-cpu=i386 which has no -m64
        # support.
-       with_arch=${with_arch:-nocona}
        with_cpu=${with_cpu:-generic}
+       tmake_file="${tmake_file} i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
        ;;
 x86_64-*-darwin*)
-       with_arch=${with_arch:-nocona}
        with_cpu=${with_cpu:-generic}
-       tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
+       tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
        tm_file="${tm_file} ${cpu_type}/darwin64.h"
        ;;
 i[34567]86-*-elf*)
@@ -1124,7 +1129,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
                if test x$enable_targets = xall; then
                        tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
                        tm_defines="${tm_defines} TARGET_BI_ARCH=1"
-                       tmake_file="${tmake_file} i386/t-linux64"
+                       tmake_file="${tmake_file} i386/t-linux64 i386/t-fprules-softfp64 soft-fp/t-softfp"
                        need_64bit_hwint=yes
                        # FIXME: -m64 for i[34567]86-*-* should be allowed just
                        # like -m32 for x86_64-*-*.
@@ -1147,7 +1152,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
        i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
        i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
        esac
-       tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
+       tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
        ;;
 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
@@ -1156,7 +1161,7 @@ x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
        x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
        x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
        esac
-       tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
+       tmake_file="${tmake_file} i386/t-linux64 i386/t-crtpc i386/t-crtfm i386/t-fprules-softfp64 soft-fp/t-softfp t-dfprules"
        ;;
 i[34567]86-*-gnu*)
        ;;
@@ -1317,14 +1322,14 @@ i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
        use_fixproto=yes
        ;;
 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
-       tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h elfos.h vx-common.h"
+       tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
        case ${target} in
          *-vxworksae*)
-           tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
+           tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
            tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
            ;;
          *)
-           tm_file="${tm_file} vxworks.h i386/vxworks.h"
+           tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
            tmake_file="${tmake_file} i386/t-vxworks"
            ;;
        esac
@@ -1509,12 +1514,36 @@ m68k-*-coff*)
        tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
        use_fixproto=yes
        ;;
-m68020-*-elf* | m68k-*-elf*)
-       default_m68k_cpu=68020
-       default_cf_cpu=5206
+m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
+       case ${target} in
+       fido-*-elf*)
+               # Check that $with_cpu makes sense.
+               case $with_cpu in
+               "" | "fidoa")
+                       ;;
+               *)
+                       echo "Cannot accept --with-cpu=$with_cpu"
+                       exit 1
+                       ;;
+               esac
+               with_cpu=fidoa
+               ;;
+       *)
+               default_m68k_cpu=68020
+               default_cf_cpu=5206
+               ;;
+       esac
        tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
        tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
-       tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf m68k/t-mlibs"
+       tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
+       # Add multilibs for targets other than fido.
+       case ${target} in
+       fido-*-elf*)
+               ;;
+       *)
+               tmake_file="$tmake_file m68k/t-mlibs"
+               ;;
+       esac
        extra_parts="crtbegin.o crtend.o"
        ;;
 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
@@ -1644,24 +1673,35 @@ mips*-*-openbsd*)
        *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
         esac
        ;;
-mipsisa32-*-elf* | mipsisa32el-*-elf*)
-       tm_file="elfos.h ${tm_file} mips/elf.h"
-       tmake_file=mips/t-isa3264
-       tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
-       use_fixproto=yes
-       ;;
-mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
-       tm_file="elfos.h ${tm_file} mips/elf.h"
-       tmake_file=mips/t-isa3264
-       tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
-       use_fixproto=yes
-       ;;
+mipsisa32-*-elf* | mipsisa32el-*-elf* | \
+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
 mipsisa64-*-elf* | mipsisa64el-*-elf*)
        tm_file="elfos.h ${tm_file} mips/elf.h"
        tmake_file=mips/t-isa3264
-       target_cpu_default="MASK_64BIT|MASK_FLOAT64"
-       tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
-       use_fixproto=yes
+       case ${target} in
+         mipsisa32r2*)
+           tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
+           ;;
+         mipsisa32*)
+           tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
+           ;;
+         mipsisa64*)
+           tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
+           ;;
+       esac
+       case ${target} in
+         mipsisa32*-*-elfoabi*)
+           tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
+           tm_file="${tm_file} mips/elfoabi.h"
+           ;;
+         mipsisa64*-*-elfoabi*)
+           tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
+           tm_file="${tm_file} mips/elfoabi.h"
+           ;;
+         *-*-elf*)
+           tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
+           ;;
+       esac
        ;;
 mipsisa64sr71k-*-elf*)
         tm_file="elfos.h ${tm_file} mips/elf.h"
@@ -1706,9 +1746,7 @@ mips*-*-rtems*)
        tmake_file="mips/t-elf t-rtems mips/t-rtems"
        ;;
 mips-wrs-vxworks)
-       # We want vxworks.h after mips/elf.h, which unfortunately means we
-       # have to redo the tm_file list from scratch.
-       tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
+       tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
        tmake_file="${tmake_file} mips/t-vxworks"
        ;;
 mips-wrs-windiss)      # Instruction-level simulator for VxWorks.
@@ -1909,9 +1947,7 @@ powerpc-*-gnu*)
        fi
        ;;
 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
-       # We want vxworks.h after rs6000/sysv4.h, which unfortunately
-       # means we have to redo the tm_file list from scratch.
-       tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+       tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
        tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
        extra_options="${extra_options} rs6000/sysv4.opt"
        extra_headers=ppc-asm.h
@@ -2213,7 +2249,7 @@ sh-*-rtems*)
        ;;
 sh-wrs-vxworks)
        tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
+       tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
        ;;
 sh-*-*)
        tm_file="${tm_file} dbxcoff.h sh/coff.h"
@@ -2347,6 +2383,10 @@ sparc-*-sysv4*)
        extra_parts="crtbegin.o crtend.o"
        use_fixproto=yes
        ;;
+sparc-wrs-vxworks)
+       tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+       tmake_file="${tmake_file} sparc/t-vxworks"
+       ;;
 sparc64-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
        extra_options="${extra_options} sparc/little-endian.opt"
@@ -2692,6 +2732,9 @@ if test x$with_cpu = x ; then
          ;;
       esac
       ;;
+    mips*-*-vxworks)
+      with_arch=mips2
+      ;;
     sparc*-*-*)
       with_cpu="`echo ${target} | sed 's/-.*$//'`"
       ;;
@@ -2792,7 +2835,7 @@ case "${target}" in
 
                case "$with_fpu" in
                "" \
-               | fpa | fpe2 | fpe3 | maverick | vfp )
+               | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 )
                        # OK
                        ;;
                *)
@@ -2840,7 +2883,7 @@ case "${target}" in
                esac
                ;;
 
-       m680[012]0-*-* | m68k*-*-*)
+       fido-*-* | m680[012]0-*-* | m68k*-*-*)
                supported_defaults="arch cpu"
                case "$with_arch" in
                "" | "m68k"| "cf")
@@ -3134,7 +3177,7 @@ case ${target} in
                fi
                ;;
 
-       m680[012]0-*-* | m68k*-*-*)
+       fido*-*-* | m680[012]0-*-* | m68k*-*-*)
                target_cpu_default2=$m68k_cpu_ident
                if [ x"$m68k_arch_family" != x ]; then
                        tmake_file="m68k/t-$m68k_arch_family $tmake_file"