;;
esac
-# Common parts for GNU/Linux, GNU/Hurd and OpenBSD systems.
+# Common parts for GNU/Linux, GNU/Hurd, OpenBSD and FreeBSD systems.
case $machine in
*-*-linux*)
xm_defines=POSIX
# These details are the same as for Linux.
xmake_file=x-linux
# But here we need a little extra magic.
- tmake_file="t-linux t-gnu"
+ tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
case $machine in
i[34567]86-*-*)
tm_file="${cpu_type}/${cpu_type}.h i386/att.h linux.h i386/linux.h gnu.h ${tm_file}"
;;
*-*-openbsd*)
tm_file=${cpu_type}/openbsd.h
- tmake_file="t-libc-ok t-openbsd"
+ tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
xm_defines=POSIX
if test x$enable_threads = xyes; then
thread_file='posix'
tmake_file="${tmake_file} t-openbsd-thread"
fi
;;
+*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
+ # This is the place-holder for the generic a.out configuration
+ # of FreeBSD. No actual configuration resides here since
+ # there was only ever a bare-bones ix86 configuration for
+ # a.out and it exists solely in the machine-specific section.
+ # This place-holder must exist to avoid dropping into
+ # the generic ELF configuration of FreeBSD (i.e. it must be
+ # ordered before that section).
+ ;;
+*-*-freebsd*)
+ # This is the generic ELF configuration of FreeBSD. Later
+ # machine-specific sections may refine and add to this
+ # configuration.
+ #
+ # Due to tm_file entry ordering issues that vary between cpu
+ # architectures, we only define fbsd_tm_file to allow the
+ # machine-specific section to dictate the final order of all
+ # entries of tm_file with the minor exception that components
+ # of the tm_file set here will always be of the form:
+ #
+ # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd.h
+ #
+ # The machine-specific section should not tamper with this
+ # ordering but may order all other entries of tm_file as it
+ # pleases around the provided core setting.
+ gas=yes
+ gnu_ld=yes
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ case $machine in
+ *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
+ *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
+ *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
+ *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";;
+ *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;;
+ esac
+ tmake_file=t-freebsd
+ xm_defines=POSIX
+ case x${enable_threads} in
+ xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";;
+ x | xyes | xpthreads | xposix)
+ thread_file='posix'
+ tmake_file="${tmake_file} t-freebsd-thread"
+ ;;
+ *) echo 'Unknown thread configuration for FreeBSD'; exit 1;;
+ esac
+ fbsd_tm_file="${fbsd_tm_file} freebsd.h"
+ if test x${thread_file} = xposix; then
+ if test x${enable_libgcj} = xyes; then
+ echo 'FreeBSD does not currently handle --enable-threads (now'
+ echo 'the default to match system compiler) and --enable-libgcj.'
+ echo 'Please explicitly configure with --disable-threads or'
+ echo '--disable-libgcj'
+ exit 1
+ fi
+ fi
+ ;;
esac
case $machine in
alpha*-*-linux*libc1*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtbe alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtbe alpha/t-crtfm alpha/t-ieee"
gas=yes gnu_ld=yes
if test x$enable_threads = xyes; then
thread_file='posix'
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtbe alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
gas=yes gnu_ld=yes
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
alpha*-*-freebsd*)
- xm_defines=POSIX
- tm_file="${tm_file} freebsd.h alpha/elf.h alpha/freebsd.h"
+ tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-freebsd alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- gas=yes gnu_ld=yes
- stabs=yes
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- tmake_file="${tmake_file} t-freebsd-thread"
- ;;
- esac
+ tmake_file="${tmake_file} alpha/t-crtbe alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
;;
alpha*-*-netbsd*)
xm_defines=POSIX
tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ tmake_file="alpha/t-crtbe alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
gas=yes gnu_ld=yes
;;
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-osf"
+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-osf alpha/t-crtfm"
case $machine in
*-*-osf1*)
tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
- extra_parts="crtinit.o crtfini.o"
;;
arc-*-elf*)
extra_parts="crtinit.o crtfini.o"
;;
arm-semi-aof | armel-semi-aof)
tm_file=arm/semiaof.h
- tmake_file=arm/t-semiaof
+ tmake_file=arm/t-semi
;;
arm*-*-netbsd*)
tm_file=arm/netbsd.h
arm*-*-linux*) # ARM GNU/Linux with ELF
xmake_file=x-linux
tm_file="arm/linux-elf.h"
- tmake_file="t-linux arm/t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
case x${enable_threads} in
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
- tmake_file=pa/t-linux
+ tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gas=yes gnu_ld=yes
if test x$enable_threads = xyes; then
xm_defines='POSIX FATAL_EXIT_CODE=12'
tm_file=i370/oe.h
xmake_file=i370/x-oe
- tmake_file=i370/t-oe
;;
i370-*-mvs*)
xm_defines='POSIX FATAL_EXIT_CODE=12'
tm_file=i370/mvs.h
- tmake_file=i370/t-mvs
;;
i370-*-linux*)
xmake_file=x-linux
tm_file="i370/linux.h ${tm_file}"
- tmake_file="t-linux i370/t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux"
# broken_install=yes
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
# extra_parts="crtbegin.o crtend.o"
;;
i[34567]86-*-chorusos*)
xm_defines=POSIX
- tm_file="i386/i386.h i386/att.h elfos.h i386/i386elf.h i386/chorus.h"
+ tm_file="i386/i386.h i386/att.h elfos.h i386/i386elf.h chorus.h"
tmake_file=i386/t-i386elf
xmake_file=x-svr4
case x${enable_threads} in
;;
i[34567]86-wrs-vxworks*)
tm_file=i386/vxi386.h
- tmake_file=i386/t-i386bare
thread_file='vxworks'
;;
i[34567]86-*-aout*)
tm_file=i386/i386-aout.h
- tmake_file=i386/t-i386bare
;;
i[34567]86-*-beoself* | i[34567]86-*-beos*)
xm_defines=POSIX
extra_parts='crtbegin.o crtend.o'
;;
i[34567]86-*-bsdi* | i[34567]86-*-bsd386*)
- tm_file=i386/bsd386.h
+ tm_file="i386/386bsd.h i386/bsd386.h"
# tmake_file=t-libc-ok
;;
i[34567]86-*-bsd*)
# use_collect2=yes
;;
i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
- tm_file="i386/freebsd-aout.h i386/perform.h"
+ tm_file=i386/freebsd-aout.h
tmake_file=t-freebsd
;;
i[34567]86-*-freebsd*)
- tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd.h i386/perform.h"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- tmake_file=t-freebsd
- gas=yes
+ tm_file="${tm_file} i386/att.h svr4.h ${fbsd_tm_file} i386/freebsd.h"
+ ;;
+i[34567]86-*-netbsdelf*)
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/att.h svr4.h i386/netbsd-elf.h"
+ tmake_file=t-netbsd
gnu_ld=yes
- stabs=yes
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- tmake_file="${tmake_file} t-freebsd-thread"
- ;;
- esac
+ float_format=i386
;;
i[34567]86-*-netbsd*)
tm_file=i386/netbsd.h
use_collect2=yes
;;
i[34567]86-*-openbsd*)
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
i[34567]86-*-coff*)
tm_file=i386/i386-coff.h
- tmake_file=i386/t-i386bare
;;
i[34567]86-*-isc*) # 80386 running ISC system
xm_defines=POSIX
tmake_file=i386/t-crtstuff
extra_parts="crtbegin.o crtend.o"
fi
- tmake_file="$tmake_file i386/t-i386bare"
install_headers_dir=install-headers-cpio
;;
i[34567]86-*-linux*oldld*) # Intel 80386's running GNU/Linux
# GNU/Linux C library 5
xmake_file=x-linux
tm_file="i386/i386.h i386/att.h linux.h i386/linux.h"
- tmake_file="t-linux t-linux-gnulibc1 i386/t-crtstuff"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
float_format=i386
# aka GNU/Linux C library 6
xmake_file=x-linux
tm_file="i386/i386.h i386/att.h linux.h i386/linux.h"
- tmake_file="t-linux i386/t-crtstuff"
+ tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
float_format=i386
i[34567]86-pc-msdosdjgpp*)
xm_file=i386/xm-djgpp.h
tm_file=i386/djgpp.h
- tmake_file=i386/t-djgpp
xmake_file=i386/x-djgpp
gnu_ld=yes
gas=yes
else
tm_file=i386/lynx-ng.h
fi
- tmake_file=i386/t-i386bare
;;
i[34567]86-*-mach*)
tm_file=i386/mach.h
i[34567]86-*-rtemscoff*)
cpu_type=i386
tm_file=i386/rtems.h
- tmake_file="i386/t-i386bare t-rtems"
+ tmake_file=t-rtems
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
else
tmake_file=i386/t-sco5
fi
- tmake_file="$tmake_file i386/t-i386bare"
extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
;;
i[34567]86-*-solaris2*)
# Only needed if gas does not support -s
tm_file="i386/sol2gas.h ${tm_file}"
fi
- tmake_file="i386/t-i386bare i386/t-sol2"
+ tmake_file=i386/t-sol2
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
+ else
+ tmake_file="$tmake_file t-slibgcc-sld"
+ fi
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
xmake_file=x-svr4
if test x${enable_threads} = x; then
then
tm_file="${tm_file} dbx.h"
fi
- tmake_file="i386/t-i386bare i386/t-crtpic"
+ tmake_file=i386/t-crtpic
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
if test x$enable_threads = xyes; then
then
tm_file="${tm_file} dbx.h"
fi
- tmake_file="i386/t-i386bare i386/t-crtpic"
+ tmake_file=i386/t-crtpic
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
;;
i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
xm_defines=POSIX
tm_file=i386/udk.h
- tmake_file="i386/t-i386bare i386/t-crtpic i386/t-udk"
+ tmake_file="i386/t-crtpic i386/t-udk"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
i386-*-vsta) # Intel 80386's running VSTa kernel
xm_file=i386/xm-vsta.h
tm_file=i386/vsta.h
- tmake_file=i386/t-vsta
;;
i[34567]86-*-win32)
xm_defines=POSIX
i960-*-coff*)
tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
tmake_file=i960/t-960bare
- use_collect2=yes
c_target_objs="i960-c.o"
cxx_target_objs="i960-c.o"
;;
i960-*-rtems)
tmake_file="i960/t-960bare t-rtems"
tm_file="${tm_file} dbxcoff.h i960/rtems.h"
- use_collect2=yes
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
c_target_objs="i960-c.o"
cxx_target_objs="i960-c.o"
;;
+ia64*-*-aix*)
+ tm_file="${tm_file} svr4.h ia64/sysv4.h ia64/aix.h"
+ tmake_file="ia64/t-ia64 ia64/t-aix"
+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
+ ;;
ia64*-*-elf*)
tm_file=ia64/elf.h
tmake_file="ia64/t-ia64"
;;
ia64*-*-linux*)
tm_file=ia64/linux.h
- tmake_file="t-linux ia64/t-ia64 ia64/t-glibc"
+ tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
if test x$enable_threads = xyes; then
thread_file='posix'
float_format=i386
;;
ia64*-*-hpux*)
- tm_file="ia64/ia64.h svr4.h ia64/sysv4.h ia64/hpux.h"
+ tm_file="ia64/ia64.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
tmake_file="ia64/t-ia64 ia64/t-hpux"
target_cpu_default="MASK_GNU_AS"
if test x$enable_threads = xyes; then
xm_defines=POSIX
tmake_file=m68k/t-m68kelf
header_files=math-68881.h
+ extra_parts="crtbegin.o crtend.o"
;;
m68k-*-lynxos*)
if test x$gas = xyes
use_collect2=yes
;;
m68k*-*-openbsd*)
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
float_format=m68k
# we need collect2 until our bug is fixed...
use_collect2=yes
# GNU/Linux C library 5
xmake_file=x-linux
tm_file=m68k/linux.h
- tmake_file="t-linux t-linux-gnulibc1 m68k/t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 m68k/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=math-68881.h
float_format=m68k
# aka the GNU/Linux C library 6.
xmake_file=x-linux
tm_file=m68k/linux.h
- tmake_file="t-linux m68k/t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux m68k/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=math-68881.h
float_format=m68k
tm_file=m68k/rtemself.h
extra_headers=math-68881.h
float_format=m68k
+ extra_parts="crtbegin.o crtend.o"
if test x$enable_threads = xyes; then
thread_file='rtems'
fi
tm_file=mips/sni-svr4.h
fi
xm_defines=POSIX
- tmake_file=mips/t-mips-gas
if test x$gnu_ld != xyes
then
use_collect2=yes
xm_file=mips/xm-iris5.h
xmake_file=mips/x-iris
# mips-tfile doesn't work yet
- tmake_file=mips/t-mips-gas
# See comment in mips/iris5.h file.
use_collect2=yes
# if test x$enable_threads = xyes; then
xm_defines=POSIX
xmake_file=mips/x-iris
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
xm_defines=POSIX
xmake_file=mips/x-iris
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
fi
xm_defines=POSIX
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
;;
mips-dec-osfrose*) # Decstation running OSF/1 reference port with OSF/rose.
tm_file="mips/osfrose.h ${tm_file}"
- tmake_file=mips/t-osfrose
extra_objs=halfpic.o
use_collect2=yes
;;
tm_file="${tm_file} dbx.h"
fi
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
mips-dec-bsd*) # Decstation running 4.4 BSD
tm_file=mips/dec-bsd.h
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
;;
mips*-*-linux*) # Linux MIPS, either endian.
xmake_file=x-linux
+ tm_file="linux.h mips/linux.h"
case $machine in
- mips*el-*) tm_file="elfos.h mips/elfl.h mips/linux.h" ;;
- *) tm_file="elfos.h mips/elf.h mips/linux.h" ;;
+ mips*el-*) tm_file="mips/little.h $tm_file" ;;
esac
- tmake_file=t-linux
+ tmake_file="t-slibgcc-elf-ver t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
gas=yes
tm_file="${tm_file} dbx.h"
fi
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
fi
xm_defines=POSIX
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
xm_defines=POSIX
if test x$gas = xyes
then
- tmake_file=mips/t-mips-gas
extra_parts="crtbegin.o crtend.o"
else
- tmake_file=mips/t-mips
extra_passes="mips-tfile mips-tdump"
fi
if test x$gnu_ld != xyes
tm_file="${tm_file} dbx.h"
fi
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
tm_file="${tm_file} dbx.h"
fi
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
tm_file="${tm_file} dbx.h"
fi
if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
+ then :
else
extra_passes="mips-tfile mips-tdump"
fi
powerpc-*-openbsd*)
tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
;;
+powerpc64-*-linux*)
+ tm_file="${tm_file} svr4.h rs6000/sysv4.h rs6000/linux64.h"
+ out_file=rs6000/rs6000.c
+ tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ xmake_file=x-linux
+ extra_headers=ppc-asm.h
+ ;;
powerpc-*-beos*)
cpu_type=rs6000
- tm_file="${tm_file} rs6000/aix.h rs6000/beos.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
xm_defines=POSIX
xm_file=rs6000/xm-beos.h
tmake_file=rs6000/t-beos
# fixed and we can get rid of this silliness.
xm_defines="HAVE_DESIGNATED_INITIALIZERS=0"
extra_objs="darwin.o"
+ c_target_objs="darwin-c.o"
+ cxx_target_objs="darwin-c.o"
# Darwin linker does collect2 functionality
use_collect2=no
;;
extra_headers=ppc-asm.h
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
;;
+powerpc-*-netbsd*)
+ xm_defines=POSIX
+ tm_file="${tm_file} svr4.h rs6000/sysv4.h rs6000/netbsd.h"
+ tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
+ extra_headers=ppc-asm.h
+ ;;
powerpc-*-chorusos*)
xm_defines=POSIX
- tm_file="${tm_file} svr4.h rs6000/sysv4.h rs6000/chorus.h"
+ tm_file="${tm_file} svr4.h rs6000/sysv4.h chorus.h"
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
extra_headers=ppc-asm.h
case x${enable_threads} in
powerpc-*-linux*libc1)
tm_file="${tm_file} svr4.h rs6000/sysv4.h rs6000/linux.h"
out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
+ tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
xmake_file=x-linux
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
powerpc-*-linux*)
tm_file="${tm_file} svr4.h rs6000/sysv4.h rs6000/linux.h"
out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
xmake_file=x-linux
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
;;
rs6000-ibm-aix3.[01]*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h"
float_format=none
use_collect2=yes
;;
rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h"
tmake_file=rs6000/t-newas
float_format=none
use_collect2=yes
;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
tmake_file=rs6000/t-newas
float_format=none
use_collect2=yes
;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
float_format=none
use_collect2=yes
;;
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
float_format=none
use_collect2=yes
;;
rs6000-ibm-aix*)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
float_format=none
use_collect2=yes
;;
rs6000-bull-bosx)
xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h"
+ tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
float_format=none
use_collect2=yes
;;
tmake_file=rs6000/t-rs6000
use_collect2=yes
;;
+s390-*-linux*)
+ xmake_file=x-linux
+ tm_file=s390/linux.h
+ tmake_file="t-linux s390/t-linux"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
+s390x-*-linux*)
+ xmake_file=x-linux
+ tm_file=s390/linux64.h
+ tmake_file="t-linux s390/t-linux"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
sh-*-elf*)
tmake_file="sh/t-sh sh/t-elf"
tm_file="sh/sh.h sh/elf.h"
use_collect2=yes
;;
sparc-*-openbsd*)
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
sparc-*-bsd*)
- tm_file=sparc/bsd.h
+ tm_file="${tm_file} sparc/bsd.h"
;;
sparc-*-chorusos*)
- tm_file="sparc/sol2.h sparc/elf.h sparc/chorus.h"
+ tm_file="sparc/sol2.h sparc/elf.h chorus.h"
tmake_file=sparc/t-chorus-elf
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
float_format=i64
sparc-*-linux*libc1*) # Sparc's running GNU/Linux, libc5
xmake_file=x-linux
tm_file=sparc/linux.h
- tmake_file="t-linux t-linux-gnulibc1"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
float_format=sparc
sparc-*-linux*) # Sparc's running GNU/Linux, libc6
xmake_file=x-linux
tm_file=sparc/linux.h
- tmake_file="t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
if test x$enable_threads = xyes; then
xm_defines=POSIX
tmake_file="sparc/t-sol2 sparc/t-sol2-64"
if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file sparc/t-slibgcc"
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
else
- tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
float_format=none
tm_file="sparc/sol2.h sparc/hal.h"
tmake_file="sparc/t-halos sparc/t-sol2"
if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file sparc/t-slibgcc"
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
else
- tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
case $machine in
xm_defines=POSIX
tmake_file=sparc/t-sol2
if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file sparc/t-slibgcc"
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
else
- tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ tmake_file="$tmake_file t-slibgcc-sld"
fi
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
-# At the moment, 32-to-64 cross compilation doesn't work.
-# case $machine in
-# *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
-# *-*-solaris2*)
-# if test x$gnu_ld = xyes
-# then
-# tm_file=sparc/sol2-64.h
-# else
-# tm_file=sparc/sol2-sld-64.h
-# fi
-# tmake_file="$tmake_file sparc/t-sol2-64"
-# ;;
-# esac
+ case $machine in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
+ *-*-solaris2*)
+ if test x$gnu_ld = xyes
+ then
+ tm_file=sparc/sol2-64.h
+ else
+ tm_file=sparc/sol2-sld-64.h
+ fi
+ tmake_file="$tmake_file sparc/t-sol2-64"
+ ;;
+ esac
case $machine in
*-*-solaris2.[0-4])
float_format=i128
;;
sparc-*-sunos4.0*)
tm_file=sparc/sunos4.h
- tmake_file=sparc/t-sunos40
use_collect2=yes
;;
sparc-*-sunos4*)
extra_parts="crtbegin.o crtend.o"
;;
sparc64-*-aout*)
- tmake_file=sparc/t-sp64
tm_file=sparc/sp64-aout.h
;;
sparc64-*-elf*)
- tmake_file=sparc/t-sp64
tm_file=sparc/sp64-elf.h
extra_parts="crtbegin.o crtend.o"
;;
sparc64-*-linux*) # 64-bit Sparc's running GNU/Linux
- tmake_file="t-linux sparc/t-linux64"
+ tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64"
tm_file=sparc/linux64.h
xmake_file=x-linux
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
;;
-vax-*-bsd*) # vaxen running BSD
+vax-*-bsd*) # VAXen running BSD
use_collect2=yes
float_format=vax
;;
-vax-*-sysv*) # vaxen running system V
+vax-*-sysv*) # VAXen running system V
tm_file="${tm_file} vax/vaxv.h"
xm_defines=POSIX
float_format=vax
use_collect2=yes
;;
vax-*-openbsd*)
- tmake_file="${tmake_file} vax/t-openbsd"
tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
float_format=vax
use_collect2=yes
;;
-vax-*-ultrix*) # vaxen running ultrix
+vax-*-ultrix*) # VAXen running ultrix
tm_file="${tm_file} vax/ultrix.h"
float_format=vax
;;
-vax-*-vms*) # vaxen running VMS
+vax-*-vms*) # VAXen running VMS
xm_file=vax/xm-vms.h
tm_file=vax/vms.h
float_format=vax
;;
-vax-*-*) # vax default entry
+vax-*-*) # VAX default entry
float_format=vax
;;
we32k-att-sysv*)
esac
;;
i686-*-* | i786-*-*)
- target_cpu_default2=3
+ case $target_alias in
+ athlon-*)
+ target_cpu_default2=5
+ ;;
+ *)
+ target_cpu_default2=3
+ ;;
+ esac
;;
alpha*-*-*)
case $machine in
| x601 | x602 | x603 | x603e | x604 | x604e | x620 \
| xec603e | x740 | x750 | x401 \
| x403 | x505 | x801 | x821 | x823 | x860)
- target_cpu_default2="\"$with_cpu\""
+ target_cpu_default2="\\\"$with_cpu\\\""
;;
xyes | xno)
OSDN Git Service
