/* Optimize by combining instructions for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GCC.
#include "real.h"
#include "toplev.h"
#include "target.h"
+#include "optabs.h"
+#include "insn-codes.h"
+#include "rtlhooks-def.h"
+/* Include output.h for dump_file. */
+#include "output.h"
+#include "params.h"
/* Number of attempts to combine instructions in this function. */
#define UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD(val) \
(((unsigned HOST_WIDE_INT) (val) << (BITS_PER_WORD - 1)) << 1)
-#define nonzero_bits(X, M) \
- cached_nonzero_bits (X, M, NULL_RTX, VOIDmode, 0)
-
-#define num_sign_bit_copies(X, M) \
- cached_num_sign_bit_copies (X, M, NULL_RTX, VOIDmode, 0)
-
/* Maximum register number, which is the size of the tables below. */
static unsigned int combine_max_regno;
-/* Record last point of death of (hard or pseudo) register n. */
+struct reg_stat {
+ /* Record last point of death of (hard or pseudo) register n. */
+ rtx last_death;
+
+ /* Record last point of modification of (hard or pseudo) register n. */
+ rtx last_set;
+
+ /* The next group of fields allows the recording of the last value assigned
+ to (hard or pseudo) register n. We use this information to see if an
+ operation being processed is redundant given a prior operation performed
+ on the register. For example, an `and' with a constant is redundant if
+ all the zero bits are already known to be turned off.
+
+ We use an approach similar to that used by cse, but change it in the
+ following ways:
+
+ (1) We do not want to reinitialize at each label.
+ (2) It is useful, but not critical, to know the actual value assigned
+ to a register. Often just its form is helpful.
+
+ Therefore, we maintain the following fields:
+
+ last_set_value the last value assigned
+ last_set_label records the value of label_tick when the
+ register was assigned
+ last_set_table_tick records the value of label_tick when a
+ value using the register is assigned
+ last_set_invalid set to nonzero when it is not valid
+ to use the value of this register in some
+ register's value
+
+ To understand the usage of these tables, it is important to understand
+ the distinction between the value in last_set_value being valid and
+ the register being validly contained in some other expression in the
+ table.
+
+ (The next two parameters are out of date).
+
+ reg_stat[i].last_set_value is valid if it is nonzero, and either
+ reg_n_sets[i] is 1 or reg_stat[i].last_set_label == label_tick.
+
+ Register I may validly appear in any expression returned for the value
+ of another register if reg_n_sets[i] is 1. It may also appear in the
+ value for register J if reg_stat[j].last_set_invalid is zero, or
+ reg_stat[i].last_set_label < reg_stat[j].last_set_label.
-static rtx *reg_last_death;
+ If an expression is found in the table containing a register which may
+ not validly appear in an expression, the register is replaced by
+ something that won't match, (clobber (const_int 0)). */
-/* Record last point of modification of (hard or pseudo) register n. */
+ /* Record last value assigned to (hard or pseudo) register n. */
-static rtx *reg_last_set;
+ rtx last_set_value;
+
+ /* Record the value of label_tick when an expression involving register n
+ is placed in last_set_value. */
+
+ int last_set_table_tick;
+
+ /* Record the value of label_tick when the value for register n is placed in
+ last_set_value. */
+
+ int last_set_label;
+
+ /* These fields are maintained in parallel with last_set_value and are
+ used to store the mode in which the register was last set, the bits
+ that were known to be zero when it was last set, and the number of
+ sign bits copies it was known to have when it was last set. */
+
+ unsigned HOST_WIDE_INT last_set_nonzero_bits;
+ char last_set_sign_bit_copies;
+ ENUM_BITFIELD(machine_mode) last_set_mode : 8;
+
+ /* Set nonzero if references to register n in expressions should not be
+ used. last_set_invalid is set nonzero when this register is being
+ assigned to and last_set_table_tick == label_tick. */
+
+ char last_set_invalid;
+
+ /* Some registers that are set more than once and used in more than one
+ basic block are nevertheless always set in similar ways. For example,
+ a QImode register may be loaded from memory in two places on a machine
+ where byte loads zero extend.
+
+ We record in the following fields if a register has some leading bits
+ that are always equal to the sign bit, and what we know about the
+ nonzero bits of a register, specifically which bits are known to be
+ zero.
+
+ If an entry is zero, it means that we don't know anything special. */
+
+ unsigned char sign_bit_copies;
+
+ unsigned HOST_WIDE_INT nonzero_bits;
+};
+
+static struct reg_stat *reg_stat;
/* Record the cuid of the last insn that invalidated memory
(anything that writes memory, and subroutine calls, but not pushes). */
those blocks as starting points. */
static sbitmap refresh_blocks;
\f
-/* The next group of arrays allows the recording of the last value assigned
- to (hard or pseudo) register n. We use this information to see if an
- operation being processed is redundant given a prior operation performed
- on the register. For example, an `and' with a constant is redundant if
- all the zero bits are already known to be turned off.
-
- We use an approach similar to that used by cse, but change it in the
- following ways:
+/* The following array records the insn_rtx_cost for every insn
+ in the instruction stream. */
- (1) We do not want to reinitialize at each label.
- (2) It is useful, but not critical, to know the actual value assigned
- to a register. Often just its form is helpful.
+static int *uid_insn_cost;
- Therefore, we maintain the following arrays:
+/* Length of the currently allocated uid_insn_cost array. */
- reg_last_set_value the last value assigned
- reg_last_set_label records the value of label_tick when the
- register was assigned
- reg_last_set_table_tick records the value of label_tick when a
- value using the register is assigned
- reg_last_set_invalid set to nonzero when it is not valid
- to use the value of this register in some
- register's value
-
- To understand the usage of these tables, it is important to understand
- the distinction between the value in reg_last_set_value being valid
- and the register being validly contained in some other expression in the
- table.
-
- Entry I in reg_last_set_value is valid if it is nonzero, and either
- reg_n_sets[i] is 1 or reg_last_set_label[i] == label_tick.
-
- Register I may validly appear in any expression returned for the value
- of another register if reg_n_sets[i] is 1. It may also appear in the
- value for register J if reg_last_set_label[i] < reg_last_set_label[j] or
- reg_last_set_invalid[j] is zero.
-
- If an expression is found in the table containing a register which may
- not validly appear in an expression, the register is replaced by
- something that won't match, (clobber (const_int 0)).
-
- reg_last_set_invalid[i] is set nonzero when register I is being assigned
- to and reg_last_set_table_tick[i] == label_tick. */
-
-/* Record last value assigned to (hard or pseudo) register n. */
-
-static rtx *reg_last_set_value;
-
-/* Record the value of label_tick when the value for register n is placed in
- reg_last_set_value[n]. */
-
-static int *reg_last_set_label;
-
-/* Record the value of label_tick when an expression involving register n
- is placed in reg_last_set_value. */
-
-static int *reg_last_set_table_tick;
-
-/* Set nonzero if references to register n in expressions should not be
- used. */
-
-static char *reg_last_set_invalid;
+static int last_insn_cost;
/* Incremented for each label. */
static int label_tick;
-/* Some registers that are set more than once and used in more than one
- basic block are nevertheless always set in similar ways. For example,
- a QImode register may be loaded from memory in two places on a machine
- where byte loads zero extend.
-
- We record in the following array what we know about the nonzero
- bits of a register, specifically which bits are known to be zero.
-
- If an entry is zero, it means that we don't know anything special. */
-
-static unsigned HOST_WIDE_INT *reg_nonzero_bits;
-
-/* Mode used to compute significance in reg_nonzero_bits. It is the largest
- integer mode that can fit in HOST_BITS_PER_WIDE_INT. */
+/* Mode used to compute significance in reg_stat[].nonzero_bits. It is the
+ largest integer mode that can fit in HOST_BITS_PER_WIDE_INT. */
static enum machine_mode nonzero_bits_mode;
-/* Nonzero if we know that a register has some leading bits that are always
- equal to the sign bit. */
-
-static unsigned char *reg_sign_bit_copies;
-
-/* Nonzero when reg_nonzero_bits and reg_sign_bit_copies can be safely used.
- It is zero while computing them and after combine has completed. This
- former test prevents propagating values based on previously set values,
- which can be incorrect if a variable is modified in a loop. */
+/* Nonzero when reg_stat[].nonzero_bits and reg_stat[].sign_bit_copies can
+ be safely used. It is zero while computing them and after combine has
+ completed. This former test prevents propagating values based on
+ previously set values, which can be incorrect if a variable is modified
+ in a loop. */
static int nonzero_sign_valid;
-/* These arrays are maintained in parallel with reg_last_set_value
- and are used to store the mode in which the register was last set,
- the bits that were known to be zero when it was last set, and the
- number of sign bits copies it was known to have when it was last set. */
-
-static enum machine_mode *reg_last_set_mode;
-static unsigned HOST_WIDE_INT *reg_last_set_nonzero_bits;
-static char *reg_last_set_sign_bit_copies;
\f
/* Record one modification to rtl structure
to be undone by storing old_contents into *where.
static int n_occurrences;
+static rtx reg_nonzero_bits_for_combine (rtx, enum machine_mode, rtx,
+ enum machine_mode,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT *);
+static rtx reg_num_sign_bit_copies_for_combine (rtx, enum machine_mode, rtx,
+ enum machine_mode,
+ unsigned int, unsigned int *);
static void do_SUBST (rtx *, rtx);
static void do_SUBST_INT (int *, int);
-static void init_reg_last_arrays (void);
+static void init_reg_last (void);
static void setup_incoming_promotions (void);
static void set_nonzero_bits_and_sign_copies (rtx, rtx, void *);
static int cant_combine_insn_p (rtx);
static void undo_commit (void);
static rtx *find_split_point (rtx *, rtx);
static rtx subst (rtx, rtx, rtx, int, int);
-static rtx combine_simplify_rtx (rtx, enum machine_mode, int, int);
+static rtx combine_simplify_rtx (rtx, enum machine_mode, int);
static rtx simplify_if_then_else (rtx);
static rtx simplify_set (rtx);
-static rtx simplify_logical (rtx, int);
+static rtx simplify_logical (rtx);
static rtx expand_compound_operation (rtx);
static rtx expand_field_assignment (rtx);
static rtx make_extraction (enum machine_mode, rtx, HOST_WIDE_INT,
static int rtx_equal_for_field_assignment_p (rtx, rtx);
static rtx make_field_assignment (rtx);
static rtx apply_distributive_law (rtx);
+static rtx distribute_and_simplify_rtx (rtx, int);
static rtx simplify_and_const_int (rtx, enum machine_mode, rtx,
unsigned HOST_WIDE_INT);
-static unsigned HOST_WIDE_INT cached_nonzero_bits (rtx, enum machine_mode,
- rtx, enum machine_mode,
- unsigned HOST_WIDE_INT);
-static unsigned HOST_WIDE_INT nonzero_bits1 (rtx, enum machine_mode, rtx,
- enum machine_mode,
- unsigned HOST_WIDE_INT);
-static unsigned int cached_num_sign_bit_copies (rtx, enum machine_mode, rtx,
- enum machine_mode,
- unsigned int);
-static unsigned int num_sign_bit_copies1 (rtx, enum machine_mode, rtx,
- enum machine_mode, unsigned int);
static int merge_outer_ops (enum rtx_code *, HOST_WIDE_INT *, enum rtx_code,
HOST_WIDE_INT, enum machine_mode, int *);
static rtx simplify_shift_const (rtx, enum rtx_code, enum machine_mode, rtx,
int);
static int recog_for_combine (rtx *, rtx, rtx *);
static rtx gen_lowpart_for_combine (enum machine_mode, rtx);
-static rtx gen_binary (enum rtx_code, enum machine_mode, rtx, rtx);
static enum rtx_code simplify_comparison (enum rtx_code, rtx *, rtx *);
static void update_table_tick (rtx);
static void record_value_for_reg (rtx, rtx, rtx);
static void mark_used_regs_combine (rtx);
static int insn_cuid (rtx);
static void record_promoted_value (rtx, rtx);
-static rtx reversed_comparison (rtx, enum machine_mode, rtx, rtx);
-static enum rtx_code combine_reversed_comparison_code (rtx);
+static int unmentioned_reg_p_1 (rtx *, void *);
+static bool unmentioned_reg_p (rtx, rtx);
+\f
+
+/* It is not safe to use ordinary gen_lowpart in combine.
+ See comments in gen_lowpart_for_combine. */
+#undef RTL_HOOKS_GEN_LOWPART
+#define RTL_HOOKS_GEN_LOWPART gen_lowpart_for_combine
+
+#undef RTL_HOOKS_REG_NONZERO_REG_BITS
+#define RTL_HOOKS_REG_NONZERO_REG_BITS reg_nonzero_bits_for_combine
+
+#undef RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES
+#define RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES reg_num_sign_bit_copies_for_combine
+
+static const struct rtl_hooks combine_rtl_hooks = RTL_HOOKS_INITIALIZER;
+
\f
/* Substitute NEWVAL, an rtx expression, into INTO, a place in some
insn. The substitution can be undone by undo_all. If INTO is already
{
/* Sanity check that we're replacing oldval with a CONST_INT
that is a valid sign-extension for the original mode. */
- if (INTVAL (newval) != trunc_int_for_mode (INTVAL (newval),
- GET_MODE (oldval)))
- abort ();
+ gcc_assert (INTVAL (newval)
+ == trunc_int_for_mode (INTVAL (newval), GET_MODE (oldval)));
/* Replacing the operand of a SUBREG or a ZERO_EXTEND with a
CONST_INT is not valid, because after the replacement, the
when do_SUBST is called to replace the operand thereof, so we
perform this test on oldval instead, checking whether an
invalid replacement took place before we got here. */
- if ((GET_CODE (oldval) == SUBREG
- && GET_CODE (SUBREG_REG (oldval)) == CONST_INT)
- || (GET_CODE (oldval) == ZERO_EXTEND
- && GET_CODE (XEXP (oldval, 0)) == CONST_INT))
- abort ();
+ gcc_assert (!(GET_CODE (oldval) == SUBREG
+ && GET_CODE (SUBREG_REG (oldval)) == CONST_INT));
+ gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
+ && GET_CODE (XEXP (oldval, 0)) == CONST_INT));
}
if (undobuf.frees)
#define SUBST_INT(INTO, NEWVAL) do_SUBST_INT(&(INTO), (NEWVAL))
\f
+/* Subroutine of try_combine. Determine whether the combine replacement
+ patterns NEWPAT and NEWI2PAT are cheaper according to insn_rtx_cost
+ that the original instruction sequence I1, I2 and I3. Note that I1
+ and/or NEWI2PAT may be NULL_RTX. This function returns false, if the
+ costs of all instructions can be estimated, and the replacements are
+ more expensive than the original sequence. */
+
+static bool
+combine_validate_cost (rtx i1, rtx i2, rtx i3, rtx newpat, rtx newi2pat)
+{
+ int i1_cost, i2_cost, i3_cost;
+ int new_i2_cost, new_i3_cost;
+ int old_cost, new_cost;
+
+ /* Lookup the original insn_rtx_costs. */
+ i2_cost = INSN_UID (i2) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i2)] : 0;
+ i3_cost = INSN_UID (i3) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i3)] : 0;
+
+ if (i1)
+ {
+ i1_cost = INSN_UID (i1) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i1)] : 0;
+ old_cost = (i1_cost > 0 && i2_cost > 0 && i3_cost > 0)
+ ? i1_cost + i2_cost + i3_cost : 0;
+ }
+ else
+ {
+ old_cost = (i2_cost > 0 && i3_cost > 0) ? i2_cost + i3_cost : 0;
+ i1_cost = 0;
+ }
+
+ /* Calculate the replacement insn_rtx_costs. */
+ new_i3_cost = insn_rtx_cost (newpat);
+ if (newi2pat)
+ {
+ new_i2_cost = insn_rtx_cost (newi2pat);
+ new_cost = (new_i2_cost > 0 && new_i3_cost > 0)
+ ? new_i2_cost + new_i3_cost : 0;
+ }
+ else
+ {
+ new_cost = new_i3_cost;
+ new_i2_cost = 0;
+ }
+
+ if (undobuf.other_insn)
+ {
+ int old_other_cost, new_other_cost;
+
+ old_other_cost = (INSN_UID (undobuf.other_insn) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (undobuf.other_insn)] : 0);
+ new_other_cost = insn_rtx_cost (PATTERN (undobuf.other_insn));
+ if (old_other_cost > 0 && new_other_cost > 0)
+ {
+ old_cost += old_other_cost;
+ new_cost += new_other_cost;
+ }
+ else
+ old_cost = 0;
+ }
+
+ /* Disallow this recombination if both new_cost and old_cost are
+ greater than zero, and new_cost is greater than old cost. */
+ if (old_cost > 0
+ && new_cost > old_cost)
+ {
+ if (dump_file)
+ {
+ if (i1)
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d, %d and %d\n",
+ INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d + %d = %d\n",
+ i1_cost, i2_cost, i3_cost, old_cost);
+ }
+ else
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d and %d\n",
+ INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d = %d\n",
+ i2_cost, i3_cost, old_cost);
+ }
+
+ if (newi2pat)
+ {
+ fprintf (dump_file, "replacement costs %d + %d = %d\n",
+ new_i2_cost, new_i3_cost, new_cost);
+ }
+ else
+ fprintf (dump_file, "replacement cost %d\n", new_cost);
+ }
+
+ return false;
+ }
+
+ /* Update the uid_insn_cost array with the replacement costs. */
+ uid_insn_cost[INSN_UID (i2)] = new_i2_cost;
+ uid_insn_cost[INSN_UID (i3)] = new_i3_cost;
+ if (i1)
+ uid_insn_cost[INSN_UID (i1)] = 0;
+
+ return true;
+}
+\f
/* Main entry point for combiner. F is the first insn of the function.
NREGS is the first unused pseudo-reg number.
combine_max_regno = nregs;
- /* It is not safe to use ordinary gen_lowpart in combine.
- See comments in gen_lowpart_for_combine. */
- gen_lowpart = gen_lowpart_for_combine;
-
- reg_nonzero_bits = xcalloc (nregs, sizeof (unsigned HOST_WIDE_INT));
- reg_sign_bit_copies = xcalloc (nregs, sizeof (unsigned char));
+ rtl_hooks = combine_rtl_hooks;
- reg_last_death = xmalloc (nregs * sizeof (rtx));
- reg_last_set = xmalloc (nregs * sizeof (rtx));
- reg_last_set_value = xmalloc (nregs * sizeof (rtx));
- reg_last_set_table_tick = xmalloc (nregs * sizeof (int));
- reg_last_set_label = xmalloc (nregs * sizeof (int));
- reg_last_set_invalid = xmalloc (nregs * sizeof (char));
- reg_last_set_mode = xmalloc (nregs * sizeof (enum machine_mode));
- reg_last_set_nonzero_bits = xmalloc (nregs * sizeof (HOST_WIDE_INT));
- reg_last_set_sign_bit_copies = xmalloc (nregs * sizeof (char));
-
- init_reg_last_arrays ();
+ reg_stat = xcalloc (nregs, sizeof (struct reg_stat));
init_recog_no_volatile ();
nonzero_bits_mode = mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0);
- /* Don't use reg_nonzero_bits when computing it. This can cause problems
- when, for example, we have j <<= 1 in a loop. */
+ /* Don't use reg_stat[].nonzero_bits when computing it. This can cause
+ problems when, for example, we have j <<= 1 in a loop. */
nonzero_sign_valid = 0;
refresh_blocks = sbitmap_alloc (last_basic_block);
sbitmap_zero (refresh_blocks);
+ /* Allocate array of current insn_rtx_costs. */
+ uid_insn_cost = xcalloc (max_uid_cuid + 1, sizeof (int));
+ last_insn_cost = max_uid_cuid;
+
for (insn = f, i = 0; insn; insn = NEXT_INSN (insn))
{
uid_cuid[INSN_UID (insn)] = ++i;
set_nonzero_bits_and_sign_copies (XEXP (links, 0), NULL_RTX,
NULL);
#endif
+
+ /* Record the current insn_rtx_cost of this instruction. */
+ if (NONJUMP_INSN_P (insn))
+ uid_insn_cost[INSN_UID (insn)] = insn_rtx_cost (PATTERN (insn));
+ if (dump_file)
+ fprintf(dump_file, "insn_cost %d: %d\n",
+ INSN_UID (insn), uid_insn_cost[INSN_UID (insn)]);
}
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
}
label_tick = 1;
last_call_cuid = 0;
mem_last_set = 0;
- init_reg_last_arrays ();
+ init_reg_last ();
setup_incoming_promotions ();
FOR_EACH_BB (this_basic_block)
{
next = 0;
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
else if (INSN_P (insn))
/* If the linked insn has been replaced by a note, then there
is no point in pursuing this chain any further. */
- if (GET_CODE (link) == NOTE)
+ if (NOTE_P (link))
continue;
for (nextlinks = LOG_LINKS (link);
We need this special code because data flow connections
via CC0 do not get entered in LOG_LINKS. */
- if (GET_CODE (insn) == JUMP_INSN
+ if (JUMP_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev)))
{
if ((next = try_combine (insn, prev,
}
/* Do the same for an insn that explicitly references CC0. */
- if (GET_CODE (insn) == INSN
+ if (NONJUMP_INSN_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& GET_CODE (PATTERN (insn)) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (insn))))
explicitly references CC0. If so, try this insn, that insn,
and its predecessor if it sets CC0. */
for (links = LOG_LINKS (insn); links; links = XEXP (links, 1))
- if (GET_CODE (XEXP (links, 0)) == INSN
+ if (NONJUMP_INSN_P (XEXP (links, 0))
&& GET_CODE (PATTERN (XEXP (links, 0))) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (XEXP (links, 0))))
&& (prev = prev_nonnote_insn (XEXP (links, 0))) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& (next = try_combine (insn, XEXP (links, 0),
prev, &new_direct_jump_p)) != 0)
&new_direct_jump_p)) != 0)
goto retry;
- if (GET_CODE (insn) != NOTE)
+ /* Try this insn with each REG_EQUAL note it links back to. */
+ for (links = LOG_LINKS (insn); links; links = XEXP (links, 1))
+ {
+ rtx set, note;
+ rtx temp = XEXP (links, 0);
+ if ((set = single_set (temp)) != 0
+ && (note = find_reg_equal_equiv_note (temp)) != 0
+ && GET_CODE (XEXP (note, 0)) != EXPR_LIST
+ /* Avoid using a register that may already been marked
+ dead by an earlier instruction. */
+ && ! unmentioned_reg_p (XEXP (note, 0), SET_SRC (set)))
+ {
+ /* Temporarily replace the set's source with the
+ contents of the REG_EQUAL note. The insn will
+ be deleted or recognized by try_combine. */
+ rtx orig = SET_SRC (set);
+ SET_SRC (set) = XEXP (note, 0);
+ next = try_combine (insn, temp, NULL_RTX,
+ &new_direct_jump_p);
+ if (next)
+ goto retry;
+ SET_SRC (set) = orig;
+ }
+ }
+
+ if (!NOTE_P (insn))
record_dead_and_set_regs (insn);
retry:
EXECUTE_IF_SET_IN_SBITMAP (refresh_blocks, 0, i,
BASIC_BLOCK (i)->flags |= BB_DIRTY);
new_direct_jump_p |= purge_all_dead_edges (0);
- delete_noop_moves (f);
+ delete_noop_moves ();
update_life_info_in_dirty_blocks (UPDATE_LIFE_GLOBAL_RM_NOTES,
PROP_DEATH_NOTES | PROP_SCAN_DEAD_CODE
/* Clean up. */
sbitmap_free (refresh_blocks);
- free (reg_nonzero_bits);
- free (reg_sign_bit_copies);
- free (reg_last_death);
- free (reg_last_set);
- free (reg_last_set_value);
- free (reg_last_set_table_tick);
- free (reg_last_set_label);
- free (reg_last_set_invalid);
- free (reg_last_set_mode);
- free (reg_last_set_nonzero_bits);
- free (reg_last_set_sign_bit_copies);
+ free (uid_insn_cost);
+ free (reg_stat);
free (uid_cuid);
{
total_successes += combine_successes;
nonzero_sign_valid = 0;
- gen_lowpart = gen_lowpart_general;
+ rtl_hooks = general_rtl_hooks;
/* Make recognizer allow volatile MEMs again. */
init_recog ();
return new_direct_jump_p;
}
-/* Wipe the reg_last_xxx arrays in preparation for another pass. */
+/* Wipe the last_xxx fields of reg_stat in preparation for another pass. */
static void
-init_reg_last_arrays (void)
+init_reg_last (void)
{
- unsigned int nregs = combine_max_regno;
-
- memset (reg_last_death, 0, nregs * sizeof (rtx));
- memset (reg_last_set, 0, nregs * sizeof (rtx));
- memset (reg_last_set_value, 0, nregs * sizeof (rtx));
- memset (reg_last_set_table_tick, 0, nregs * sizeof (int));
- memset (reg_last_set_label, 0, nregs * sizeof (int));
- memset (reg_last_set_invalid, 0, nregs * sizeof (char));
- memset (reg_last_set_mode, 0, nregs * sizeof (enum machine_mode));
- memset (reg_last_set_nonzero_bits, 0, nregs * sizeof (HOST_WIDE_INT));
- memset (reg_last_set_sign_bit_copies, 0, nregs * sizeof (char));
+ unsigned int i;
+ for (i = 0; i < combine_max_regno; i++)
+ memset (reg_stat + i, 0, offsetof (struct reg_stat, sign_bit_copies));
}
\f
/* Set up any promoted values for incoming argument registers. */
{
unsigned int num;
- if (GET_CODE (x) == REG
+ if (REG_P (x)
&& REGNO (x) >= FIRST_PSEUDO_REGISTER
/* If this register is undefined at the start of the file, we can't
say what its contents were. */
{
if (set == 0 || GET_CODE (set) == CLOBBER)
{
- reg_nonzero_bits[REGNO (x)] = GET_MODE_MASK (GET_MODE (x));
- reg_sign_bit_copies[REGNO (x)] = 1;
+ reg_stat[REGNO (x)].nonzero_bits = GET_MODE_MASK (GET_MODE (x));
+ reg_stat[REGNO (x)].sign_bit_copies = 1;
return;
}
#ifdef SHORT_IMMEDIATES_SIGN_EXTEND
/* If X is narrower than a word and SRC is a non-negative
constant that would appear negative in the mode of X,
- sign-extend it for use in reg_nonzero_bits because some
+ sign-extend it for use in reg_stat[].nonzero_bits because some
machines (maybe most) will actually do the sign-extension
and this is the conservative approach.
#endif
/* Don't call nonzero_bits if it cannot change anything. */
- if (reg_nonzero_bits[REGNO (x)] != ~(unsigned HOST_WIDE_INT) 0)
- reg_nonzero_bits[REGNO (x)]
+ if (reg_stat[REGNO (x)].nonzero_bits != ~(unsigned HOST_WIDE_INT) 0)
+ reg_stat[REGNO (x)].nonzero_bits
|= nonzero_bits (src, nonzero_bits_mode);
num = num_sign_bit_copies (SET_SRC (set), GET_MODE (x));
- if (reg_sign_bit_copies[REGNO (x)] == 0
- || reg_sign_bit_copies[REGNO (x)] > num)
- reg_sign_bit_copies[REGNO (x)] = num;
+ if (reg_stat[REGNO (x)].sign_bit_copies == 0
+ || reg_stat[REGNO (x)].sign_bit_copies > num)
+ reg_stat[REGNO (x)].sign_bit_copies = num;
}
else
{
- reg_nonzero_bits[REGNO (x)] = GET_MODE_MASK (GET_MODE (x));
- reg_sign_bit_copies[REGNO (x)] = 1;
+ reg_stat[REGNO (x)].nonzero_bits = GET_MODE_MASK (GET_MODE (x));
+ reg_stat[REGNO (x)].sign_bit_copies = 1;
}
}
}
something to tell them apart, e.g. different modes. For
now, we forgo such complicated tests and simply disallow
combining of USES of pseudo registers with any other USE. */
- if (GET_CODE (XEXP (elt, 0)) == REG
+ if (REG_P (XEXP (elt, 0))
&& GET_CODE (PATTERN (i3)) == PARALLEL)
{
rtx i3pat = PATTERN (i3);
rtx i3elt = XVECEXP (i3pat, 0, i);
if (GET_CODE (i3elt) == USE
- && GET_CODE (XEXP (i3elt, 0)) == REG
+ && REG_P (XEXP (i3elt, 0))
&& (REGNO (XEXP (i3elt, 0)) == regno
? reg_set_between_p (XEXP (elt, 0),
PREV_INSN (insn), i3)
/* Can't merge a function call. */
|| GET_CODE (src) == CALL
/* Don't eliminate a function call argument. */
- || (GET_CODE (i3) == CALL_INSN
+ || (CALL_P (i3)
&& (find_reg_fusage (i3, USE, dest)
- || (GET_CODE (dest) == REG
+ || (REG_P (dest)
&& REGNO (dest) < FIRST_PSEUDO_REGISTER
&& global_regs[REGNO (dest)])))
/* Don't substitute into an incremented register. */
|| FIND_REG_INC_NOTE (i3, dest)
|| (succ && FIND_REG_INC_NOTE (succ, dest))
+ /* Don't substitute into a non-local goto, this confuses CFG. */
+ || (JUMP_P (i3) && find_reg_note (i3, REG_NON_LOCAL_GOTO, NULL_RTX))
#if 0
/* Don't combine the end of a libcall into anything. */
/* ??? This gives worse code, and appears to be unnecessary, since no
does not use any registers whose values alter in between. However,
If the insns are adjacent, a use can't cross a set even though we
think it might (this can happen for a sequence of insns each setting
- the same destination; reg_last_set of that register might point to
+ the same destination; last_set of that register might point to
a NOTE). If INSN has a REG_EQUIV note, the register is always
equivalent to the memory so the substitution is valid even if there
are intervening stores. Also, don't move a volatile asm or
UNSPEC_VOLATILE across any other insns. */
|| (! all_adjacent
- && (((GET_CODE (src) != MEM
+ && (((!MEM_P (src)
|| ! find_reg_note (insn, REG_EQUIV, src))
&& use_crosses_set_p (src, INSN_CUID (insn)))
|| (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
return 0;
/* DEST must either be a REG or CC0. */
- if (GET_CODE (dest) == REG)
+ if (REG_P (dest))
{
/* If register alignment is being enforced for multi-word items in all
cases except for parameters, it is possible to have a register copy
Also, on some machines we don't want to extend the life of a hard
register. */
- if (GET_CODE (src) == REG
+ if (REG_P (src)
&& ((REGNO (dest) < FIRST_PSEUDO_REGISTER
&& ! HARD_REGNO_MODE_OK (REGNO (dest), GET_MODE (dest)))
/* Don't extend the life of a hard register unless it is
else if (GET_CODE (dest) != CC0)
return 0;
- /* Don't substitute for a register intended as a clobberable operand.
- Similarly, don't substitute an expression containing a register that
- will be clobbered in I3. */
+
if (GET_CODE (PATTERN (i3)) == PARALLEL)
for (i = XVECLEN (PATTERN (i3), 0) - 1; i >= 0; i--)
- if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER
- && (reg_overlap_mentioned_p (XEXP (XVECEXP (PATTERN (i3), 0, i), 0),
- src)
- || rtx_equal_p (XEXP (XVECEXP (PATTERN (i3), 0, i), 0), dest)))
- return 0;
+ if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER)
+ {
+ /* Don't substitute for a register intended as a clobberable
+ operand. */
+ rtx reg = XEXP (XVECEXP (PATTERN (i3), 0, i), 0);
+ if (rtx_equal_p (reg, dest))
+ return 0;
+
+ /* If the clobber represents an earlyclobber operand, we must not
+ substitute an expression containing the clobbered register.
+ As we do not analyze the constraint strings here, we have to
+ make the conservative assumption. However, if the register is
+ a fixed hard reg, the clobber cannot represent any operand;
+ we leave it up to the machine description to either accept or
+ reject use-and-clobber patterns. */
+ if (!REG_P (reg)
+ || REGNO (reg) >= FIRST_PSEUDO_REGISTER
+ || !fixed_regs[REGNO (reg)])
+ if (reg_overlap_mentioned_p (reg, src))
+ return 0;
+ }
/* If INSN contains anything volatile, or is an `asm' (whether volatile
or not), reject, unless nothing volatile comes between it and I3 */
to be an explicit register variable, and was chosen for a reason. */
if (GET_CODE (src) == ASM_OPERANDS
- && GET_CODE (dest) == REG && REGNO (dest) < FIRST_PSEUDO_REGISTER)
+ && REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER)
return 0;
/* If there are any volatile insns between INSN and I3, reject, because
if (INSN_P (p) && p != succ && volatile_insn_p (PATTERN (p)))
return 0;
- /* If INSN or I2 contains an autoincrement or autodecrement,
- make sure that register is not used between there and I3,
- and not already used in I3 either.
+ /* If INSN contains an autoincrement or autodecrement, make sure that
+ register is not used between there and I3, and not already used in
+ I3 either. Neither must it be used in PRED or SUCC, if they exist.
Also insist that I3 not be a jump; if it were one
and the incremented register were spilled, we would lose. */
#ifdef AUTO_INC_DEC
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_INC
- && (GET_CODE (i3) == JUMP_INSN
+ && (JUMP_P (i3)
|| reg_used_between_p (XEXP (link, 0), insn, i3)
+ || (pred != NULL_RTX
+ && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (pred)))
+ || (succ != NULL_RTX
+ && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (succ)))
|| reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i3))))
return 0;
#endif
but that would be much slower, and this ought to be equivalent. */
p = prev_nonnote_insn (insn);
- if (p && p != pred && GET_CODE (p) == INSN && sets_cc0_p (PATTERN (p))
+ if (p && p != pred && NONJUMP_INSN_P (p) && sets_cc0_p (PATTERN (p))
&& ! all_adjacent)
return 0;
#endif
into the address of a MEM, so only prevent the combination if
i1 or i2 set the same MEM. */
if ((inner_dest != dest &&
- (GET_CODE (inner_dest) != MEM
+ (!MEM_P (inner_dest)
|| rtx_equal_p (i2dest, inner_dest)
|| (i1dest && rtx_equal_p (i1dest, inner_dest)))
&& (reg_overlap_mentioned_p (i2dest, inner_dest)
function argument; the all_adjacent test in can_combine_p also
checks this; here, we do a more specific test for this case. */
- || (GET_CODE (inner_dest) == REG
+ || (REG_P (inner_dest)
&& REGNO (inner_dest) < FIRST_PSEUDO_REGISTER
&& (! HARD_REGNO_MODE_OK (REGNO (inner_dest),
GET_MODE (inner_dest))))
Never add REG_DEAD notes for the FRAME_POINTER_REGNUM or the
STACK_POINTER_REGNUM, since these are always considered to be
live. Similarly for ARG_POINTER_REGNUM if it is fixed. */
- if (pi3dest_killed && GET_CODE (dest) == REG
+ if (pi3dest_killed && REG_P (dest)
&& reg_referenced_p (dest, PATTERN (i3))
&& REGNO (dest) != FRAME_POINTER_REGNUM
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
{
/* New patterns for I3 and I2, respectively. */
rtx newpat, newi2pat = 0;
+ rtvec newpat_vec_with_clobbers = 0;
int substed_i2 = 0, substed_i1 = 0;
/* Indicates need to preserve SET in I1 or I2 in I3 if it is not dead. */
int added_sets_1, added_sets_2;
int i3_subst_into_i2 = 0;
/* Notes that I1, I2 or I3 is a MULT operation. */
int have_mult = 0;
+ int swap_i2i3 = 0;
int maxreg;
rtx temp;
where I2 and I3 are adjacent to avoid making difficult register
usage tests. */
- if (i1 == 0 && GET_CODE (i3) == INSN && GET_CODE (PATTERN (i3)) == SET
- && GET_CODE (SET_SRC (PATTERN (i3))) == REG
+ if (i1 == 0 && NONJUMP_INSN_P (i3) && GET_CODE (PATTERN (i3)) == SET
+ && REG_P (SET_SRC (PATTERN (i3)))
&& REGNO (SET_SRC (PATTERN (i3))) >= FIRST_PSEUDO_REGISTER
&& find_reg_note (i3, REG_DEAD, SET_SRC (PATTERN (i3)))
&& GET_CODE (PATTERN (i2)) == PARALLEL
&& (temp = single_set (i2)) != 0
&& (GET_CODE (SET_SRC (temp)) == CONST_INT
|| GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
- && GET_CODE (SET_DEST (temp)) == REG
+ && REG_P (SET_DEST (temp))
&& GET_MODE_CLASS (GET_MODE (SET_DEST (temp))) == MODE_INT
&& GET_MODE_SIZE (GET_MODE (SET_DEST (temp))) == 2 * UNITS_PER_WORD
&& GET_CODE (PATTERN (i3)) == SET
{
/* We don't handle the case of the target word being wider
than a host wide int. */
- if (HOST_BITS_PER_WIDE_INT < BITS_PER_WORD)
- abort ();
+ gcc_assert (HOST_BITS_PER_WIDE_INT >= BITS_PER_WORD);
lo &= ~(UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1);
lo |= (INTVAL (SET_SRC (PATTERN (i3)))
else
/* We don't handle the case of the higher word not fitting
entirely in either hi or lo. */
- abort ();
+ gcc_unreachable ();
combine_merges++;
subst_insn = i3;
&& GET_CODE (SET_SRC (XVECEXP (PATTERN (i2), 0, 0))) == COMPARE
&& XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 1) == const0_rtx
&& GET_CODE (XVECEXP (PATTERN (i2), 0, 1)) == SET
- && GET_CODE (SET_DEST (XVECEXP (PATTERN (i2), 0, 1))) == REG
+ && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, 1)))
&& rtx_equal_p (XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 0),
SET_SRC (XVECEXP (PATTERN (i2), 0, 1))))
{
#if 0
if (!(GET_CODE (PATTERN (i3)) == SET
- && GET_CODE (SET_SRC (PATTERN (i3))) == REG
- && GET_CODE (SET_DEST (PATTERN (i3))) == MEM
+ && REG_P (SET_SRC (PATTERN (i3)))
+ && MEM_P (SET_DEST (PATTERN (i3)))
&& (GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_INC
|| GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_DEC)))
/* It's not the exception. */
/* Note which hard regs this insn has as inputs. */
mark_used_regs_combine (newpat);
+ /* If recog_for_combine fails, it strips existing clobbers. If we'll
+ consider splitting this pattern, we might need these clobbers. */
+ if (i1 && GET_CODE (newpat) == PARALLEL
+ && GET_CODE (XVECEXP (newpat, 0, XVECLEN (newpat, 0) - 1)) == CLOBBER)
+ {
+ int len = XVECLEN (newpat, 0);
+
+ newpat_vec_with_clobbers = rtvec_alloc (len);
+ for (i = 0; i < len; i++)
+ RTVEC_ELT (newpat_vec_with_clobbers, i) = XVECEXP (newpat, 0, i);
+ }
+
/* Is the result of combination a valid instruction? */
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
rtx set1 = XVECEXP (newpat, 0, 1);
rtx note;
- if (((GET_CODE (SET_DEST (set1)) == REG
+ if (((REG_P (SET_DEST (set1))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set1)))
|| (GET_CODE (SET_DEST (set1)) == SUBREG
&& find_reg_note (i3, REG_UNUSED, SUBREG_REG (SET_DEST (set1)))))
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
}
- else if (((GET_CODE (SET_DEST (set0)) == REG
+ else if (((REG_P (SET_DEST (set0))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set0)))
|| (GET_CODE (SET_DEST (set0)) == SUBREG
&& find_reg_note (i3, REG_UNUSED,
we can change its mode. */
if (GET_MODE (SET_DEST (newpat)) != GET_MODE (i2dest)
&& GET_MODE (SET_DEST (newpat)) != VOIDmode
- && GET_CODE (i2dest) == REG
+ && REG_P (i2dest)
&& (REGNO (i2dest) < FIRST_PSEUDO_REGISTER
|| (REG_N_SETS (REGNO (i2dest)) == 1 && ! added_sets_2
&& ! REG_USERVAR_P (i2dest))))
}
}
+ /* If recog_for_combine has discarded clobbers, try to use them
+ again for the split. */
+ if (m_split == 0 && newpat_vec_with_clobbers)
+ m_split
+ = split_insns (gen_rtx_PARALLEL (VOIDmode,
+ newpat_vec_with_clobbers), i3);
+
if (m_split && NEXT_INSN (m_split) == NULL_RTX)
{
m_split = PATTERN (m_split);
|| GET_CODE (new_i2_dest) == SUBREG)
new_i2_dest = XEXP (new_i2_dest, 0);
- if (GET_CODE (new_i3_dest) == REG
- && GET_CODE (new_i2_dest) == REG
+ if (REG_P (new_i3_dest)
+ && REG_P (new_i2_dest)
&& REGNO (new_i3_dest) == REGNO (new_i2_dest))
REG_N_SETS (REGNO (new_i2_dest))++;
}
are set between I2 and I3. */
if (insn_code_number < 0 && (split = find_split_point (&newpat, i3)) != 0
#ifdef HAVE_cc0
- && GET_CODE (i2dest) == REG
+ && REG_P (i2dest)
#endif
/* We need I2DEST in the proper mode. If it is a hard register
- or the only use of a pseudo, we can change its mode. */
+ or the only use of a pseudo, we can change its mode.
+ Make sure we don't change a hard register to have a mode that
+ isn't valid for it, or change the number of registers. */
&& (GET_MODE (*split) == GET_MODE (i2dest)
|| GET_MODE (*split) == VOIDmode
- || REGNO (i2dest) < FIRST_PSEUDO_REGISTER
- || (REG_N_SETS (REGNO (i2dest)) == 1 && ! added_sets_2
+ || (REGNO (i2dest) < FIRST_PSEUDO_REGISTER
+ && HARD_REGNO_MODE_OK (REGNO (i2dest), GET_MODE (*split))
+ && (HARD_REGNO_NREGS (REGNO (i2dest), GET_MODE (i2dest))
+ == HARD_REGNO_NREGS (REGNO (i2dest), GET_MODE (*split))))
+ || (REGNO (i2dest) >= FIRST_PSEUDO_REGISTER
+ && REG_N_SETS (REGNO (i2dest)) == 1 && ! added_sets_2
&& ! REG_USERVAR_P (i2dest)))
&& (next_real_insn (i2) == i3
|| ! use_crosses_set_p (*split, INSN_CUID (i2)))
#ifdef INSN_SCHEDULING
/* If *SPLIT is a paradoxical SUBREG, when we split it, it should
be written as a ZERO_EXTEND. */
- if (split_code == SUBREG && GET_CODE (SUBREG_REG (*split)) == MEM)
+ if (split_code == SUBREG && MEM_P (SUBREG_REG (*split)))
{
#ifdef LOAD_EXTEND_OP
/* Or as a SIGN_EXTEND if LOAD_EXTEND_OP says that that's
SUBST (*split, newdest);
i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
+ /* recog_for_combine might have added CLOBBERs to newi2pat.
+ Make sure NEWPAT does not depend on the clobbered regs. */
+ if (GET_CODE (newi2pat) == PARALLEL)
+ for (i = XVECLEN (newi2pat, 0) - 1; i >= 0; i--)
+ if (GET_CODE (XVECEXP (newi2pat, 0, i)) == CLOBBER)
+ {
+ rtx reg = XEXP (XVECEXP (newi2pat, 0, i), 0);
+ if (reg_overlap_mentioned_p (reg, newpat))
+ {
+ undo_all ();
+ return 0;
+ }
+ }
+
/* If the split point was a MULT and we didn't have one before,
don't use one now. */
if (i2_code_number >= 0 && ! (split_code == MULT && ! have_mult))
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != ZERO_EXTRACT
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
&& ! (temp = SET_DEST (XVECEXP (newpat, 0, 1)),
- (GET_CODE (temp) == REG
- && reg_nonzero_bits[REGNO (temp)] != 0
+ (REG_P (temp)
+ && reg_stat[REGNO (temp)].nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
- && (reg_nonzero_bits[REGNO (temp)]
+ && (reg_stat[REGNO (temp)].nonzero_bits
!= GET_MODE_MASK (word_mode))))
&& ! (GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) == SUBREG
&& (temp = SUBREG_REG (SET_DEST (XVECEXP (newpat, 0, 1))),
- (GET_CODE (temp) == REG
- && reg_nonzero_bits[REGNO (temp)] != 0
+ (REG_P (temp)
+ && reg_stat[REGNO (temp)].nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
- && (reg_nonzero_bits[REGNO (temp)]
+ && (reg_stat[REGNO (temp)].nonzero_bits
!= GET_MODE_MASK (word_mode)))))
&& ! reg_overlap_mentioned_p (SET_DEST (XVECEXP (newpat, 0, 1)),
SET_SRC (XVECEXP (newpat, 0, 1)))
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
if (insn_code_number >= 0)
- {
- rtx insn;
- rtx link;
-
- /* If we will be able to accept this, we have made a change to the
- destination of I3. This requires us to do a few adjustments. */
- PATTERN (i3) = newpat;
- adjust_for_new_dest (i3);
-
- /* I3 now uses what used to be its destination and which is
- now I2's destination. That means we need a LOG_LINK from
- I3 to I2. But we used to have one, so we still will.
-
- However, some later insn might be using I2's dest and have
- a LOG_LINK pointing at I3. We must remove this link.
- The simplest way to remove the link is to point it at I1,
- which we know will be a NOTE. */
-
- for (insn = NEXT_INSN (i3);
- insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
- || insn != BB_HEAD (this_basic_block->next_bb));
- insn = NEXT_INSN (insn))
- {
- if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
- {
- for (link = LOG_LINKS (insn); link;
- link = XEXP (link, 1))
- if (XEXP (link, 0) == i3)
- XEXP (link, 0) = i1;
-
- break;
- }
- }
- }
+ swap_i2i3 = 1;
}
/* Similarly, check for a case where we have a PARALLEL of two independent
if (REG_NOTE_KIND (note) == REG_UNUSED
&& ! reg_set_p (XEXP (note, 0), PATTERN (undobuf.other_insn)))
{
- if (GET_CODE (XEXP (note, 0)) == REG)
+ if (REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))--;
remove_note (undobuf.other_insn, note);
}
for (note = new_other_notes; note; note = XEXP (note, 1))
- if (GET_CODE (XEXP (note, 0)) == REG)
+ if (REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))++;
distribute_notes (new_other_notes, undobuf.other_insn,
they are adjacent to each other or not. */
{
rtx p = prev_nonnote_insn (i3);
- if (p && p != i2 && GET_CODE (p) == INSN && newi2pat
+ if (p && p != i2 && NONJUMP_INSN_P (p) && newi2pat
&& sets_cc0_p (newi2pat))
{
undo_all ();
}
#endif
+ /* Only allow this combination if insn_rtx_costs reports that the
+ replacement instructions are cheaper than the originals. */
+ if (!combine_validate_cost (i1, i2, i3, newpat, newi2pat))
+ {
+ undo_all ();
+ return 0;
+ }
+
/* We now know that we can do this combination. Merge the insns and
update the status of registers and LOG_LINKS. */
+ if (swap_i2i3)
+ {
+ rtx insn;
+ rtx link;
+ rtx ni2dest;
+
+ /* I3 now uses what used to be its destination and which is now
+ I2's destination. This requires us to do a few adjustments. */
+ PATTERN (i3) = newpat;
+ adjust_for_new_dest (i3);
+
+ /* We need a LOG_LINK from I3 to I2. But we used to have one,
+ so we still will.
+
+ However, some later insn might be using I2's dest and have
+ a LOG_LINK pointing at I3. We must remove this link.
+ The simplest way to remove the link is to point it at I1,
+ which we know will be a NOTE. */
+
+ /* newi2pat is usually a SET here; however, recog_for_combine might
+ have added some clobbers. */
+ if (GET_CODE (newi2pat) == PARALLEL)
+ ni2dest = SET_DEST (XVECEXP (newi2pat, 0, 0));
+ else
+ ni2dest = SET_DEST (newi2pat);
+
+ for (insn = NEXT_INSN (i3);
+ insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
+ || insn != BB_HEAD (this_basic_block->next_bb));
+ insn = NEXT_INSN (insn))
+ {
+ if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
+ {
+ for (link = LOG_LINKS (insn); link;
+ link = XEXP (link, 1))
+ if (XEXP (link, 0) == i3)
+ XEXP (link, 0) = i1;
+
+ break;
+ }
+ }
+ }
+
{
rtx i3notes, i2notes, i1notes = 0;
rtx i3links, i2links, i1links = 0;
INSN_CODE (i3) = insn_code_number;
PATTERN (i3) = newpat;
- if (GET_CODE (i3) == CALL_INSN && CALL_INSN_FUNCTION_USAGE (i3))
+ if (CALL_P (i3) && CALL_INSN_FUNCTION_USAGE (i3))
{
rtx call_usage = CALL_INSN_FUNCTION_USAGE (i3);
{
for (i = 0; i < XVECLEN (PATTERN (i2), 0); i++)
if (GET_CODE (XVECEXP (PATTERN (i2), 0, i)) != USE
- && GET_CODE (SET_DEST (XVECEXP (PATTERN (i2), 0, i))) == REG
+ && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, i)))
&& SET_DEST (XVECEXP (PATTERN (i2), 0, i)) != i2dest
&& ! find_reg_note (i2, REG_UNUSED,
SET_DEST (XVECEXP (PATTERN (i2), 0, i))))
PATTERN (i2) = newi2pat;
}
else
- {
- PUT_CODE (i2, NOTE);
- NOTE_LINE_NUMBER (i2) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i2) = 0;
- }
+ SET_INSN_DELETED (i2);
if (i1)
{
LOG_LINKS (i1) = 0;
REG_NOTES (i1) = 0;
- PUT_CODE (i1, NOTE);
- NOTE_LINE_NUMBER (i1) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i1) = 0;
+ SET_INSN_DELETED (i1);
}
/* Get death notes for everything that is now used in either I3 or
if (newi2pat && new_i2_notes)
{
for (temp = new_i2_notes; temp; temp = XEXP (temp, 1))
- if (GET_CODE (XEXP (temp, 0)) == REG)
+ if (REG_P (XEXP (temp, 0)))
REG_N_DEATHS (REGNO (XEXP (temp, 0)))++;
distribute_notes (new_i2_notes, i2, i2, NULL_RTX);
if (new_i3_notes)
{
for (temp = new_i3_notes; temp; temp = XEXP (temp, 1))
- if (GET_CODE (XEXP (temp, 0)) == REG)
+ if (REG_P (XEXP (temp, 0)))
REG_N_DEATHS (REGNO (XEXP (temp, 0)))++;
distribute_notes (new_i3_notes, i3, i3, NULL_RTX);
if (i3dest_killed)
{
- if (GET_CODE (i3dest_killed) == REG)
+ if (REG_P (i3dest_killed))
REG_N_DEATHS (REGNO (i3dest_killed))++;
if (newi2pat && reg_set_p (i3dest_killed, newi2pat))
if (i2dest_in_i2src)
{
- if (GET_CODE (i2dest) == REG)
+ if (REG_P (i2dest))
REG_N_DEATHS (REGNO (i2dest))++;
if (newi2pat && reg_set_p (i2dest, newi2pat))
if (i1dest_in_i1src)
{
- if (GET_CODE (i1dest) == REG)
+ if (REG_P (i1dest))
REG_N_DEATHS (REGNO (i1dest))++;
if (newi2pat && reg_set_p (i1dest, newi2pat))
distribute_links (i2links);
distribute_links (i1links);
- if (GET_CODE (i2dest) == REG)
+ if (REG_P (i2dest))
{
rtx link;
rtx i2_insn = 0, i2_val = 0, set;
}
}
- if (i1 && GET_CODE (i1dest) == REG)
+ if (i1 && REG_P (i1dest))
{
rtx link;
rtx i1_insn = 0, i1_val = 0, set;
REG_N_SETS (regno)--;
}
- /* Update reg_nonzero_bits et al for any changes that may have been made
- to this insn. The order of set_nonzero_bits_and_sign_copies() is
- important. Because newi2pat can affect nonzero_bits of newpat */
+ /* Update reg_stat[].nonzero_bits et al for any changes that may have
+ been made to this insn. The order of
+ set_nonzero_bits_and_sign_copies() is important. Because newi2pat
+ can affect nonzero_bits of newpat */
if (newi2pat)
note_stores (newi2pat, set_nonzero_bits_and_sign_copies, NULL);
note_stores (newpat, set_nonzero_bits_and_sign_copies, NULL);
mark_jump_label (PATTERN (i3), i3, 0);
if ((temp = next_nonnote_insn (i3)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (i3);
}
*new_direct_jump_p = 1;
if ((temp = next_nonnote_insn (undobuf.other_insn)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (undobuf.other_insn);
}
#ifdef INSN_SCHEDULING
/* If we are making a paradoxical SUBREG invalid, it becomes a split
point. */
- if (GET_CODE (SUBREG_REG (x)) == MEM)
+ if (MEM_P (SUBREG_REG (x)))
return loc;
#endif
return find_split_point (&SUBREG_REG (x), insn);
if (seq
&& NEXT_INSN (seq) != NULL_RTX
&& NEXT_INSN (NEXT_INSN (seq)) == NULL_RTX
- && GET_CODE (seq) == INSN
+ && NONJUMP_INSN_P (seq)
&& GET_CODE (PATTERN (seq)) == SET
&& SET_DEST (PATTERN (seq)) == reg
&& ! reg_mentioned_p (reg,
SET_SRC (PATTERN (seq)))
- && GET_CODE (NEXT_INSN (seq)) == INSN
+ && NONJUMP_INSN_P (NEXT_INSN (seq))
&& GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
&& SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
&& memory_address_p (GET_MODE (x),
if (src == mask)
SUBST (SET_SRC (x),
- gen_binary (IOR, mode, dest, GEN_INT (src << pos)));
+ simplify_gen_binary (IOR, mode, dest, GEN_INT (src << pos)));
else
- SUBST (SET_SRC (x),
- gen_binary (IOR, mode,
- gen_binary (AND, mode, dest,
- gen_int_mode (~(mask << pos),
- mode)),
- GEN_INT (src << pos)));
+ {
+ rtx negmask = gen_int_mode (~(mask << pos), mode);
+ SUBST (SET_SRC (x),
+ simplify_gen_binary (IOR, mode,
+ simplify_gen_binary (AND, mode,
+ dest, negmask),
+ GEN_INT (src << pos)));
+ }
SUBST (SET_DEST (x), dest);
be better. */
if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_SRC (x), 0)) == REG
+ && REG_P (XEXP (SET_SRC (x), 0))
&& (pos = exact_log2 (INTVAL (XEXP (SET_SRC (x), 1)))) >= 7
- && GET_CODE (SET_DEST (x)) == REG
+ && REG_P (SET_DEST (x))
&& (split = find_single_use (SET_DEST (x), insn, (rtx*) 0)) != 0
&& (GET_CODE (*split) == EQ || GET_CODE (*split) == NE)
&& XEXP (*split, 0) == SET_DEST (x)
#define COMBINE_RTX_EQUAL_P(X,Y) \
((X) == (Y) \
- || (GET_CODE (X) == REG && GET_CODE (Y) == REG \
+ || (REG_P (X) && REG_P (Y) \
&& REGNO (X) == REGNO (Y) && GET_MODE (X) == GET_MODE (Y)))
if (! in_dest && COMBINE_RTX_EQUAL_P (x, from))
delete the feeding insn, which is incorrect.
So force this insn not to match in this (rare) case. */
- if (! in_dest && code == REG && GET_CODE (from) == REG
+ if (! in_dest && code == REG && REG_P (from)
&& REGNO (x) == REGNO (from))
return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
{
rtx dest = SET_DEST (XVECEXP (x, 0, i));
- if (GET_CODE (dest) != REG
+ if (!REG_P (dest)
&& GET_CODE (dest) != CC0
&& GET_CODE (dest) != PC)
{
where we want to suppress replacing something inside a
SET_SRC are handled via the IN_DEST operand. */
if (code == SET
- && (GET_CODE (SET_DEST (x)) == REG
+ && (REG_P (SET_DEST (x))
|| GET_CODE (SET_DEST (x)) == CC0
|| GET_CODE (SET_DEST (x)) == PC))
fmt = "ie";
/* If this is a register being set, ignore it. */
new = XEXP (x, i);
if (in_dest
- && (code == SUBREG || code == STRICT_LOW_PART
- || code == ZERO_EXTRACT)
&& i == 0
- && GET_CODE (new) == REG)
+ && (((code == SUBREG || code == ZERO_EXTRACT)
+ && REG_P (new))
+ || code == STRICT_LOW_PART))
;
else if (COMBINE_RTX_EQUAL_P (XEXP (x, i), from))
#ifdef CANNOT_CHANGE_MODE_CLASS
if (code == SUBREG
- && GET_CODE (to) == REG
+ && REG_P (to)
&& REGNO (to) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (to),
GET_MODE (to),
{
x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
new, GET_MODE (XEXP (x, 0)));
- if (! x)
- abort ();
+ gcc_assert (x);
}
else
SUBST (XEXP (x, i), new);
/* If X is sufficiently simple, don't bother trying to do anything
with it. */
if (code != CONST_INT && code != REG && code != CLOBBER)
- x = combine_simplify_rtx (x, op0_mode, i == 3, in_dest);
+ x = combine_simplify_rtx (x, op0_mode, in_dest);
if (GET_CODE (x) == code)
break;
outer level; call `subst' to simplify recursively. Return the new
expression.
- OP0_MODE is the original mode of XEXP (x, 0); LAST is nonzero if this
- will be the iteration even if an expression with a code different from
- X is returned; IN_DEST is nonzero if we are inside a SET_DEST. */
+ OP0_MODE is the original mode of XEXP (x, 0). IN_DEST is nonzero
+ if we are inside a SET_DEST. */
static rtx
-combine_simplify_rtx (rtx x, enum machine_mode op0_mode, int last,
- int in_dest)
+combine_simplify_rtx (rtx x, enum machine_mode op0_mode, int in_dest)
{
enum rtx_code code = GET_CODE (x);
enum machine_mode mode = GET_MODE (x);
new = simplify_shift_const (NULL_RTX, ASHIFTRT, mode, new,
INTVAL (XEXP (XEXP (x, 0), 1)));
- SUBST (XEXP (x, 0), gen_binary (PLUS, mode, new, temp));
+ SUBST (XEXP (x, 0), simplify_gen_binary (PLUS, mode, new, temp));
}
/* If this is a simple operation applied to an IF_THEN_ELSE, try
/* If the result values are STORE_FLAG_VALUE and zero, we can
just make the comparison operation. */
if (true_rtx == const_true_rtx && false_rtx == const0_rtx)
- x = gen_binary (cond_code, mode, cond, cop1);
+ x = simplify_gen_relational (cond_code, mode, VOIDmode,
+ cond, cop1);
else if (true_rtx == const0_rtx && false_rtx == const_true_rtx
&& ((reversed = reversed_comparison_code_parts
(cond_code, cond, cop1, NULL))
!= UNKNOWN))
- x = gen_binary (reversed, mode, cond, cop1);
+ x = simplify_gen_relational (reversed, mode, VOIDmode,
+ cond, cop1);
/* Likewise, we can make the negate of a comparison operation
if the result values are - STORE_FLAG_VALUE and zero. */
&& INTVAL (true_rtx) == - STORE_FLAG_VALUE
&& false_rtx == const0_rtx)
x = simplify_gen_unary (NEG, mode,
- gen_binary (cond_code, mode, cond,
- cop1),
+ simplify_gen_relational (cond_code,
+ mode, VOIDmode,
+ cond, cop1),
mode);
else if (GET_CODE (false_rtx) == CONST_INT
&& INTVAL (false_rtx) == - STORE_FLAG_VALUE
(cond_code, cond, cop1, NULL))
!= UNKNOWN))
x = simplify_gen_unary (NEG, mode,
- gen_binary (reversed, mode,
- cond, cop1),
+ simplify_gen_relational (reversed,
+ mode, VOIDmode,
+ cond, cop1),
mode);
else
return gen_rtx_IF_THEN_ELSE (mode,
- gen_binary (cond_code, VOIDmode,
- cond, cop1),
+ simplify_gen_relational (cond_code,
+ mode,
+ VOIDmode,
+ cond,
+ cop1),
true_rtx, false_rtx);
code = GET_CODE (x);
}
if (inner)
- return gen_binary (code, mode, other, inner);
+ return simplify_gen_binary (code, mode, other, inner);
}
}
/* Don't change the mode of the MEM if that would change the meaning
of the address. */
- if (GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (SUBREG_REG (x))
&& (MEM_VOLATILE_P (SUBREG_REG (x))
|| mode_dependent_address_p (XEXP (SUBREG_REG (x), 0))))
return gen_rtx_CLOBBER (mode, const0_rtx);
if (GET_CODE (XEXP (x, 0)) == XOR
&& XEXP (XEXP (x, 0), 1) == const1_rtx
&& nonzero_bits (XEXP (XEXP (x, 0), 0), mode) == 1)
- return gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0), constm1_rtx);
+ return simplify_gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0),
+ constm1_rtx);
temp = expand_compound_operation (XEXP (x, 0));
or a SUBREG of one since we'd be making the expression more
complex if it was just a register. */
- if (GET_CODE (temp) != REG
+ if (!REG_P (temp)
&& ! (GET_CODE (temp) == SUBREG
- && GET_CODE (SUBREG_REG (temp)) == REG)
+ && REG_P (SUBREG_REG (temp)))
&& (i = exact_log2 (nonzero_bits (temp, mode))) >= 0)
{
rtx temp1 = simplify_shift_const
in1 = XEXP (XEXP (XEXP (x, 0), 0), 0);
in2 = XEXP (XEXP (x, 0), 1);
- return gen_binary (MINUS, mode, XEXP (x, 1),
- gen_binary (MULT, mode, in1, in2));
+ return simplify_gen_binary (MINUS, mode, XEXP (x, 1),
+ simplify_gen_binary (MULT, mode,
+ in1, in2));
}
/* If we have (plus (plus (A const) B)), associate it so that CONST is
they are now checked elsewhere. */
if (GET_CODE (XEXP (x, 0)) == PLUS
&& CONSTANT_ADDRESS_P (XEXP (XEXP (x, 0), 1)))
- return gen_binary (PLUS, mode,
- gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0),
- XEXP (x, 1)),
- XEXP (XEXP (x, 0), 1));
+ return simplify_gen_binary (PLUS, mode,
+ simplify_gen_binary (PLUS, mode,
+ XEXP (XEXP (x, 0), 0),
+ XEXP (x, 1)),
+ XEXP (XEXP (x, 0), 1));
/* (plus (xor (and <foo> (const_int pow2 - 1)) <c>) <-c>)
when c is (const_int (pow2 + 1) / 2) is a sign extension of a
if (COMPARISON_P (XEXP (x, 0))
&& ((STORE_FLAG_VALUE == -1 && XEXP (x, 1) == const1_rtx)
|| (STORE_FLAG_VALUE == 1 && XEXP (x, 1) == constm1_rtx))
- && (reversed = reversed_comparison (XEXP (x, 0), mode,
- XEXP (XEXP (x, 0), 0),
- XEXP (XEXP (x, 0), 1))))
+ && (reversed = reversed_comparison (XEXP (x, 0), mode)))
return
simplify_gen_unary (NEG, mode, reversed, mode);
the bitsize of the mode - 1. This allows simplification of
"a = (b & 8) == 0;" */
if (XEXP (x, 1) == constm1_rtx
- && GET_CODE (XEXP (x, 0)) != REG
+ && !REG_P (XEXP (x, 0))
&& ! (GET_CODE (XEXP (x, 0)) == SUBREG
- && GET_CODE (SUBREG_REG (XEXP (x, 0))) == REG)
+ && REG_P (SUBREG_REG (XEXP (x, 0))))
&& nonzero_bits (XEXP (x, 0), mode) == 1)
return simplify_shift_const (NULL_RTX, ASHIFTRT, mode,
simplify_shift_const (NULL_RTX, ASHIFT, mode,
& nonzero_bits (XEXP (x, 1), mode)) == 0)
{
/* Try to simplify the expression further. */
- rtx tor = gen_binary (IOR, mode, XEXP (x, 0), XEXP (x, 1));
- temp = combine_simplify_rtx (tor, mode, last, in_dest);
+ rtx tor = simplify_gen_binary (IOR, mode, XEXP (x, 0), XEXP (x, 1));
+ temp = combine_simplify_rtx (tor, mode, in_dest);
/* If we could, great. If not, do not go ahead with the IOR
replacement, since PLUS appears in many special purpose
if (STORE_FLAG_VALUE == 1
&& XEXP (x, 0) == const1_rtx
&& COMPARISON_P (XEXP (x, 1))
- && (reversed = reversed_comparison (XEXP (x, 1), mode,
- XEXP (XEXP (x, 1), 0),
- XEXP (XEXP (x, 1), 1))))
+ && (reversed = reversed_comparison (XEXP (x, 1), mode)))
return reversed;
/* (minus <foo> (and <foo> (const_int -pow2))) becomes
in1 = XEXP (XEXP (XEXP (x, 1), 0), 0);
in2 = XEXP (XEXP (x, 1), 1);
- return gen_binary (PLUS, mode, gen_binary (MULT, mode, in1, in2),
- XEXP (x, 0));
+ return simplify_gen_binary (PLUS, mode,
+ simplify_gen_binary (MULT, mode,
+ in1, in2),
+ XEXP (x, 0));
}
/* Canonicalize (minus (neg A) (mult B C)) to
in1 = simplify_gen_unary (NEG, mode, XEXP (XEXP (x, 1), 0), mode);
in2 = XEXP (XEXP (x, 1), 1);
- return gen_binary (MINUS, mode, gen_binary (MULT, mode, in1, in2),
- XEXP (XEXP (x, 0), 0));
+ return simplify_gen_binary (MINUS, mode,
+ simplify_gen_binary (MULT, mode,
+ in1, in2),
+ XEXP (XEXP (x, 0), 0));
}
/* Canonicalize (minus A (plus B C)) to (minus (minus A B) C) for
integers. */
if (GET_CODE (XEXP (x, 1)) == PLUS && INTEGRAL_MODE_P (mode))
- return gen_binary (MINUS, mode,
- gen_binary (MINUS, mode, XEXP (x, 0),
- XEXP (XEXP (x, 1), 0)),
- XEXP (XEXP (x, 1), 1));
+ return simplify_gen_binary (MINUS, mode,
+ simplify_gen_binary (MINUS, mode,
+ XEXP (x, 0),
+ XEXP (XEXP (x, 1), 0)),
+ XEXP (XEXP (x, 1), 1));
break;
case MULT:
if (GET_CODE (XEXP (x, 0)) == PLUS)
{
- x = apply_distributive_law
- (gen_binary (PLUS, mode,
- gen_binary (MULT, mode,
- XEXP (XEXP (x, 0), 0), XEXP (x, 1)),
- gen_binary (MULT, mode,
- XEXP (XEXP (x, 0), 1),
- copy_rtx (XEXP (x, 1)))));
-
- if (GET_CODE (x) != MULT)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
+
/* Try simplify a*(b/c) as (a*b)/c. */
if (FLOAT_MODE_P (mode) && flag_unsafe_math_optimizations
&& GET_CODE (XEXP (x, 0)) == DIV)
XEXP (XEXP (x, 0), 0),
XEXP (x, 1));
if (tem)
- return gen_binary (DIV, mode, tem, XEXP (XEXP (x, 0), 1));
+ return simplify_gen_binary (DIV, mode, tem, XEXP (XEXP (x, 0), 1));
}
break;
&& nonzero_bits (op0, mode) == 1)
{
op0 = expand_compound_operation (op0);
- return gen_binary (XOR, mode,
- gen_lowpart (mode, op0),
- const1_rtx);
+ return simplify_gen_binary (XOR, mode,
+ gen_lowpart (mode, op0),
+ const1_rtx);
}
else if (STORE_FLAG_VALUE == 1
case AND:
case IOR:
case XOR:
- return simplify_logical (x, last);
+ return simplify_logical (x);
case ABS:
/* (abs (neg <foo>)) -> (abs <foo>) */
return simplify_shift_const (x, code, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
- else if (SHIFT_COUNT_TRUNCATED && GET_CODE (XEXP (x, 1)) != REG)
+ else if (SHIFT_COUNT_TRUNCATED && !REG_P (XEXP (x, 1)))
SUBST (XEXP (x, 1),
force_to_mode (XEXP (x, 1), GET_MODE (XEXP (x, 1)),
((HOST_WIDE_INT) 1
rtx op1 = XEXP (x, 1);
int len;
- if (GET_CODE (op1) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (op1) == PARALLEL);
len = XVECLEN (op1, 0);
if (len == 1
&& GET_CODE (XVECEXP (op1, 0, 0)) == CONST_INT
/* Simplify storing of the truth value. */
if (comparison_p && true_rtx == const_true_rtx && false_rtx == const0_rtx)
- return gen_binary (true_code, mode, XEXP (cond, 0), XEXP (cond, 1));
+ return simplify_gen_relational (true_code, mode, VOIDmode,
+ XEXP (cond, 0), XEXP (cond, 1));
/* Also when the truth value has to be reversed. */
if (comparison_p
&& true_rtx == const0_rtx && false_rtx == const_true_rtx
- && (reversed = reversed_comparison (cond, mode, XEXP (cond, 0),
- XEXP (cond, 1))))
+ && (reversed = reversed_comparison (cond, mode)))
return reversed;
/* Sometimes we can simplify the arm of an IF_THEN_ELSE if a register used
comparisons and see if that says anything about the value of each arm. */
if (comparison_p
- && ((false_code = combine_reversed_comparison_code (cond))
+ && ((false_code = reversed_comparison_code (cond, NULL))
!= UNKNOWN)
- && GET_CODE (XEXP (cond, 0)) == REG)
+ && REG_P (XEXP (cond, 0)))
{
HOST_WIDE_INT nzb;
rtx from = XEXP (cond, 0);
the false arm is more complicated than the true arm. */
if (comparison_p
- && combine_reversed_comparison_code (cond) != UNKNOWN
+ && reversed_comparison_code (cond, NULL) != UNKNOWN
&& (true_rtx == pc_rtx
|| (CONSTANT_P (true_rtx)
&& GET_CODE (false_rtx) != CONST_INT && false_rtx != pc_rtx)
|| rtx_equal_p (false_rtx, XEXP (cond, 0))))
{
true_code = reversed_comparison_code (cond, NULL);
- SUBST (XEXP (x, 0),
- reversed_comparison (cond, GET_MODE (cond), XEXP (cond, 0),
- XEXP (cond, 1)));
-
+ SUBST (XEXP (x, 0), reversed_comparison (cond, GET_MODE (cond)));
SUBST (XEXP (x, 1), false_rtx);
SUBST (XEXP (x, 2), true_rtx);
{
case GE:
case GT:
- return gen_binary (SMAX, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (SMAX, mode, true_rtx, false_rtx);
case LE:
case LT:
- return gen_binary (SMIN, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (SMIN, mode, true_rtx, false_rtx);
case GEU:
case GTU:
- return gen_binary (UMAX, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (UMAX, mode, true_rtx, false_rtx);
case LEU:
case LTU:
- return gen_binary (UMIN, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (UMIN, mode, true_rtx, false_rtx);
default:
break;
}
rtx f = make_compound_operation (false_rtx, SET);
rtx cond_op0 = XEXP (cond, 0);
rtx cond_op1 = XEXP (cond, 1);
- enum rtx_code op = NIL, extend_op = NIL;
+ enum rtx_code op = UNKNOWN, extend_op = UNKNOWN;
enum machine_mode m = mode;
rtx z = 0, c1 = NULL_RTX;
if (z)
{
- temp = subst (gen_binary (true_code, m, cond_op0, cond_op1),
+ temp = subst (simplify_gen_relational (true_code, m, VOIDmode,
+ cond_op0, cond_op1),
pc_rtx, pc_rtx, 0, 0);
- temp = gen_binary (MULT, m, temp,
- gen_binary (MULT, m, c1, const_true_rtx));
+ temp = simplify_gen_binary (MULT, m, temp,
+ simplify_gen_binary (MULT, m, c1,
+ const_true_rtx));
temp = subst (temp, pc_rtx, pc_rtx, 0, 0);
- temp = gen_binary (op, m, gen_lowpart (m, z), temp);
+ temp = simplify_gen_binary (op, m, gen_lowpart (m, z), temp);
- if (extend_op != NIL)
+ if (extend_op != UNKNOWN)
temp = simplify_gen_unary (extend_op, mode, temp, m);
return temp;
rtx op0, op1, tmp;
int other_changed = 0;
enum machine_mode compare_mode = GET_MODE (dest);
- enum machine_mode tmp_mode;
if (GET_CODE (src) == COMPARE)
op0 = XEXP (src, 0), op1 = XEXP (src, 1);
else
- op0 = src, op1 = const0_rtx;
-
- /* Check whether the comparison is known at compile time. */
- if (GET_MODE (op0) != VOIDmode)
- tmp_mode = GET_MODE (op0);
- else if (GET_MODE (op1) != VOIDmode)
- tmp_mode = GET_MODE (op1);
+ op0 = src, op1 = CONST0_RTX (GET_MODE (src));
+
+ tmp = simplify_relational_operation (old_code, compare_mode, VOIDmode,
+ op0, op1);
+ if (!tmp)
+ new_code = old_code;
+ else if (!CONSTANT_P (tmp))
+ {
+ new_code = GET_CODE (tmp);
+ op0 = XEXP (tmp, 0);
+ op1 = XEXP (tmp, 1);
+ }
else
- tmp_mode = compare_mode;
- tmp = simplify_const_relational_operation (old_code, tmp_mode,
- op0, op1);
- if (tmp != NULL_RTX)
{
rtx pat = PATTERN (other_insn);
undobuf.other_insn = other_insn;
}
/* Simplify our comparison, if possible. */
- new_code = simplify_comparison (old_code, &op0, &op1);
+ new_code = simplify_comparison (new_code, &op0, &op1);
#ifdef SELECT_CC_MODE
/* If this machine has CC modes other than CCmode, check to see if we
need to use a different CC mode here. */
- compare_mode = SELECT_CC_MODE (new_code, op0, op1);
+ if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC)
+ compare_mode = GET_MODE (op0);
+ else
+ compare_mode = SELECT_CC_MODE (new_code, op0, op1);
#ifndef HAVE_cc0
/* If the mode changed, we have to change SET_DEST, the mode in the
PUT_CODE (*cc_use, old_code);
other_changed = 0;
- op0 = gen_binary (XOR, GET_MODE (op0), op0, GEN_INT (mask));
+ op0 = simplify_gen_binary (XOR, GET_MODE (op0),
+ op0, GEN_INT (mask));
}
}
}
< GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
- && ! (GET_CODE (dest) == REG && REGNO (dest) < FIRST_PSEUDO_REGISTER
+ && ! (REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (dest),
GET_MODE (SUBREG_REG (src)),
GET_MODE (src)))
#endif
- && (GET_CODE (dest) == REG
+ && (REG_P (dest)
|| (GET_CODE (dest) == SUBREG
- && GET_CODE (SUBREG_REG (dest)) == REG)))
+ && REG_P (SUBREG_REG (dest)))))
{
SUBST (SET_DEST (x),
gen_lowpart (GET_MODE (SUBREG_REG (src)),
zero_extend to avoid the reload that would otherwise be required. */
if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
- && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != NIL
+ && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != UNKNOWN
&& SUBREG_BYTE (src) == 0
&& (GET_MODE_SIZE (GET_MODE (src))
> GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
- && GET_CODE (SUBREG_REG (src)) == MEM)
+ && MEM_P (SUBREG_REG (src)))
{
SUBST (SET_SRC (x),
gen_rtx_fmt_e (LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))),
&& rtx_equal_p (XEXP (false_rtx, 1), true_rtx))
term1 = true_rtx, false_rtx = XEXP (false_rtx, 0), true_rtx = const0_rtx;
- term2 = gen_binary (AND, GET_MODE (src),
- XEXP (XEXP (src, 0), 0), true_rtx);
- term3 = gen_binary (AND, GET_MODE (src),
- simplify_gen_unary (NOT, GET_MODE (src),
- XEXP (XEXP (src, 0), 0),
- GET_MODE (src)),
- false_rtx);
+ term2 = simplify_gen_binary (AND, GET_MODE (src),
+ XEXP (XEXP (src, 0), 0), true_rtx);
+ term3 = simplify_gen_binary (AND, GET_MODE (src),
+ simplify_gen_unary (NOT, GET_MODE (src),
+ XEXP (XEXP (src, 0), 0),
+ GET_MODE (src)),
+ false_rtx);
SUBST (SET_SRC (x),
- gen_binary (IOR, GET_MODE (src),
- gen_binary (IOR, GET_MODE (src), term1, term2),
- term3));
+ simplify_gen_binary (IOR, GET_MODE (src),
+ simplify_gen_binary (IOR, GET_MODE (src),
+ term1, term2),
+ term3));
src = SET_SRC (x);
}
}
\f
/* Simplify, X, and AND, IOR, or XOR operation, and return the simplified
- result. LAST is nonzero if this is the last retry. */
+ result. */
static rtx
-simplify_logical (rtx x, int last)
+simplify_logical (rtx x)
{
enum machine_mode mode = GET_MODE (x);
rtx op0 = XEXP (x, 0);
if (GET_CODE (op0) == XOR
&& rtx_equal_p (XEXP (op0, 0), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 1), mode),
- op1);
+ x = simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 1), mode),
+ op1);
if (GET_CODE (op0) == XOR
&& rtx_equal_p (XEXP (op0, 1), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 0), mode),
- op1);
+ x = simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 0), mode),
+ op1);
/* Similarly for (~(A ^ B)) & A. */
if (GET_CODE (op0) == NOT
&& GET_CODE (XEXP (op0, 0)) == XOR
&& rtx_equal_p (XEXP (XEXP (op0, 0), 0), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode, XEXP (XEXP (op0, 0), 1), op1);
+ x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 1), op1);
if (GET_CODE (op0) == NOT
&& GET_CODE (XEXP (op0, 0)) == XOR
&& rtx_equal_p (XEXP (XEXP (op0, 0), 1), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode, XEXP (XEXP (op0, 0), 0), op1);
+ x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 0), op1);
/* We can call simplify_and_const_int only if we don't lose
any (sign) bits when converting INTVAL (op1) to
/* If we have (ior (and (X C1) C2)) and the next restart would be
the last, simplify this by making C1 as small as possible
- and then exit. */
- if (last
- && GET_CODE (x) == IOR && GET_CODE (op0) == AND
+ and then exit. Only do this if C1 actually changes: for now
+ this only saves memory but, should this transformation be
+ moved to simplify-rtx.c, we'd risk unbounded recursion there. */
+ if (GET_CODE (x) == IOR && GET_CODE (op0) == AND
&& GET_CODE (XEXP (op0, 1)) == CONST_INT
- && GET_CODE (op1) == CONST_INT)
- return gen_binary (IOR, mode,
- gen_binary (AND, mode, XEXP (op0, 0),
+ && GET_CODE (op1) == CONST_INT
+ && (INTVAL (XEXP (op0, 1)) & INTVAL (op1)) != 0)
+ return simplify_gen_binary (IOR, mode,
+ simplify_gen_binary
+ (AND, mode, XEXP (op0, 0),
GEN_INT (INTVAL (XEXP (op0, 1))
& ~INTVAL (op1))), op1);
&& ! side_effects_p (XEXP (op0, 1)))
return op1;
- /* In the following group of tests (and those in case IOR below),
- we start with some combination of logical operations and apply
- the distributive law followed by the inverse distributive law.
- Most of the time, this results in no change. However, if some of
- the operands are the same or inverses of each other, simplifications
- will result.
-
- For example, (and (ior A B) (not B)) can occur as the result of
- expanding a bit field assignment. When we apply the distributive
- law to this, we get (ior (and (A (not B))) (and (B (not B)))),
- which then simplifies to (and (A (not B))).
-
- If we have (and (ior A B) C), apply the distributive law and then
- the inverse distributive law to see if things simplify. */
-
+ /* If we have any of (and (ior A B) C) or (and (xor A B) C),
+ apply the distributive law and then the inverse distributive
+ law to see if things simplify. */
if (GET_CODE (op0) == IOR || GET_CODE (op0) == XOR)
{
- x = apply_distributive_law
- (gen_binary (GET_CODE (op0), mode,
- gen_binary (AND, mode, XEXP (op0, 0), op1),
- gen_binary (AND, mode, XEXP (op0, 1),
- copy_rtx (op1))));
- if (GET_CODE (x) != AND)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
-
if (GET_CODE (op1) == IOR || GET_CODE (op1) == XOR)
- return apply_distributive_law
- (gen_binary (GET_CODE (op1), mode,
- gen_binary (AND, mode, XEXP (op1, 0), op0),
- gen_binary (AND, mode, XEXP (op1, 1),
- copy_rtx (op0))));
-
- /* Similarly, taking advantage of the fact that
- (and (not A) (xor B C)) == (xor (ior A B) (ior A C)) */
-
- if (GET_CODE (op0) == NOT && GET_CODE (op1) == XOR)
- return apply_distributive_law
- (gen_binary (XOR, mode,
- gen_binary (IOR, mode, XEXP (op0, 0), XEXP (op1, 0)),
- gen_binary (IOR, mode, copy_rtx (XEXP (op0, 0)),
- XEXP (op1, 1))));
-
- else if (GET_CODE (op1) == NOT && GET_CODE (op0) == XOR)
- return apply_distributive_law
- (gen_binary (XOR, mode,
- gen_binary (IOR, mode, XEXP (op1, 0), XEXP (op0, 0)),
- gen_binary (IOR, mode, copy_rtx (XEXP (op1, 0)), XEXP (op0, 1))));
+ {
+ rtx result = distribute_and_simplify_rtx (x, 1);
+ if (result)
+ return result;
+ }
break;
case IOR:
if (GET_CODE (op0) == AND)
{
- x = apply_distributive_law
- (gen_binary (AND, mode,
- gen_binary (IOR, mode, XEXP (op0, 0), op1),
- gen_binary (IOR, mode, XEXP (op0, 1),
- copy_rtx (op1))));
-
- if (GET_CODE (x) != IOR)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
if (GET_CODE (op1) == AND)
{
- x = apply_distributive_law
- (gen_binary (AND, mode,
- gen_binary (IOR, mode, XEXP (op1, 0), op0),
- gen_binary (IOR, mode, XEXP (op1, 1),
- copy_rtx (op0))));
-
- if (GET_CODE (x) != IOR)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 1);
+ if (result)
+ return result;
}
/* Convert (ior (ashift A CX) (lshiftrt A CY)) where CX+CY equals the
if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& (nonzero_bits (op0, mode)
& nonzero_bits (op1, mode)) == 0)
- return (gen_binary (IOR, mode, op0, op1));
+ return (simplify_gen_binary (IOR, mode, op0, op1));
/* Convert (XOR (NOT x) (NOT y)) to (XOR x y).
Also convert (XOR (NOT x) y) to (NOT (XOR x y)), similarly for
}
else if (num_negated == 1)
return
- simplify_gen_unary (NOT, mode, gen_binary (XOR, mode, op0, op1),
+ simplify_gen_unary (NOT, mode,
+ simplify_gen_binary (XOR, mode, op0, op1),
mode);
}
if (GET_CODE (op0) == AND
&& rtx_equal_p (XEXP (op0, 1), op1)
&& ! side_effects_p (op1))
- return gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 0), mode),
- op1);
+ return simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 0), mode),
+ op1);
else if (GET_CODE (op0) == AND
&& rtx_equal_p (XEXP (op0, 0), op1)
&& ! side_effects_p (op1))
- return gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 1), mode),
- op1);
+ return simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 1), mode),
+ op1);
/* (xor (comparison foo bar) (const_int 1)) can become the reversed
comparison if STORE_FLAG_VALUE is 1. */
if (STORE_FLAG_VALUE == 1
&& op1 == const1_rtx
&& COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode, XEXP (op0, 0),
- XEXP (op0, 1))))
+ && (reversed = reversed_comparison (op0, mode)))
return reversed;
/* (lshiftrt foo C) where C is the number of bits in FOO minus 1
== (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1))
&& op1 == const_true_rtx
&& COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode, XEXP (op0, 0),
- XEXP (op0, 1))))
+ && (reversed = reversed_comparison (op0, mode)))
return reversed;
break;
default:
- abort ();
+ gcc_unreachable ();
}
return x;
case ZERO_EXTRACT:
unsignedp = 1;
+
+ /* ... fall through ... */
+
case SIGN_EXTRACT:
/* If the operand is a CLOBBER, just return it. */
if (GET_CODE (XEXP (x, 0)) == CLOBBER)
rtx inner;
rtx pos; /* Always counts from low bit. */
int len;
- rtx mask;
+ rtx mask, cleared, masked;
enum machine_mode compute_mode;
/* Loop until we find something we can't simplify. */
/* If position is ADJUST - X, new position is X. */
pos = XEXP (pos, 0);
else
- pos = gen_binary (MINUS, GET_MODE (pos),
- GEN_INT (GET_MODE_BITSIZE (GET_MODE (inner))
- - len),
- pos);
+ pos = simplify_gen_binary (MINUS, GET_MODE (pos),
+ GEN_INT (GET_MODE_BITSIZE (
+ GET_MODE (inner))
+ - len),
+ pos);
}
}
}
/* Compute a mask of LEN bits, if we can do this on the host machine. */
- if (len < HOST_BITS_PER_WIDE_INT)
- mask = GEN_INT (((HOST_WIDE_INT) 1 << len) - 1);
- else
+ if (len >= HOST_BITS_PER_WIDE_INT)
break;
/* Now compute the equivalent expression. Make a copy of INNER
for the SET_DEST in case it is a MEM into which we will substitute;
we don't want shared RTL in that case. */
- x = gen_rtx_SET
- (VOIDmode, copy_rtx (inner),
- gen_binary (IOR, compute_mode,
- gen_binary (AND, compute_mode,
- simplify_gen_unary (NOT, compute_mode,
- gen_binary (ASHIFT,
- compute_mode,
- mask, pos),
- compute_mode),
- inner),
- gen_binary (ASHIFT, compute_mode,
- gen_binary (AND, compute_mode,
- gen_lowpart
- (compute_mode, SET_SRC (x)),
- mask),
- pos)));
+ mask = GEN_INT (((HOST_WIDE_INT) 1 << len) - 1);
+ cleared = simplify_gen_binary (AND, compute_mode,
+ simplify_gen_unary (NOT, compute_mode,
+ simplify_gen_binary (ASHIFT,
+ compute_mode,
+ mask, pos),
+ compute_mode),
+ inner);
+ masked = simplify_gen_binary (ASHIFT, compute_mode,
+ simplify_gen_binary (
+ AND, compute_mode,
+ gen_lowpart (compute_mode, SET_SRC (x)),
+ mask),
+ pos);
+
+ x = gen_rtx_SET (VOIDmode, copy_rtx (inner),
+ simplify_gen_binary (IOR, compute_mode,
+ cleared, masked));
}
return x;
The subreg adds or removes high bits; its mode is
irrelevant to the meaning of this extraction,
since POS and LEN count from the lsb. */
- if (GET_CODE (SUBREG_REG (inner)) == MEM)
+ if (MEM_P (SUBREG_REG (inner)))
is_mode = GET_MODE (SUBREG_REG (inner));
inner = SUBREG_REG (inner);
}
if (tmode != BLKmode
&& ! (spans_byte && inner_mode != tmode)
&& ((pos_rtx == 0 && (pos % BITS_PER_WORD) == 0
- && GET_CODE (inner) != MEM
+ && !MEM_P (inner)
&& (! in_dest
- || (GET_CODE (inner) == REG
+ || (REG_P (inner)
&& have_insn_for (STRICT_LOW_PART, tmode))))
- || (GET_CODE (inner) == MEM && pos_rtx == 0
+ || (MEM_P (inner) && pos_rtx == 0
&& (pos
% (STRICT_ALIGNMENT ? GET_MODE_ALIGNMENT (tmode)
: BITS_PER_UNIT)) == 0
If INNER is not a MEM, get a piece consisting of just the field
of interest (in this case POS % BITS_PER_WORD must be 0). */
- if (GET_CODE (inner) == MEM)
+ if (MEM_P (inner))
{
HOST_WIDE_INT offset;
new = adjust_address_nv (inner, tmode, offset);
}
- else if (GET_CODE (inner) == REG)
+ else if (REG_P (inner))
{
if (tmode != inner_mode)
{
make a STRICT_LOW_PART unless we made a MEM. */
if (in_dest)
- return (GET_CODE (new) == MEM ? new
+ return (MEM_P (new) ? new
: (GET_CODE (new) != SUBREG
? gen_rtx_CLOBBER (tmode, const0_rtx)
: gen_rtx_STRICT_LOW_PART (VOIDmode, new)));
length is not 1. In all other cases, we would only be going outside
our object in cases when an original shift would have been
undefined. */
- if (! spans_byte && GET_CODE (inner) == MEM
+ if (! spans_byte && MEM_P (inner)
&& ((pos_rtx == 0 && pos + len > GET_MODE_BITSIZE (is_mode))
|| (pos_rtx != 0 && len != 1)))
return 0;
/* If this is not from memory, the desired mode is wanted_inner_reg_mode;
if we have to change the mode of memory and cannot, the desired mode is
EXTRACTION_MODE. */
- if (GET_CODE (inner) != MEM)
+ if (!MEM_P (inner))
wanted_inner_mode = wanted_inner_reg_mode;
else if (inner_mode != wanted_inner_mode
&& (mode_dependent_address_p (XEXP (inner, 0))
If it's a MEM we need to recompute POS relative to that.
However, if we're extracting from (or inserting into) a register,
we want to recompute POS relative to wanted_inner_mode. */
- int width = (GET_CODE (inner) == MEM
+ int width = (MEM_P (inner)
? GET_MODE_BITSIZE (is_mode)
: GET_MODE_BITSIZE (wanted_inner_mode));
pos_rtx
= gen_rtx_MINUS (GET_MODE (pos_rtx), GEN_INT (width - len), pos_rtx);
/* POS may be less than 0 now, but we check for that below.
- Note that it can only be less than 0 if GET_CODE (inner) != MEM. */
+ Note that it can only be less than 0 if !MEM_P (inner). */
}
/* If INNER has a wider mode, make it smaller. If this is a constant
the value. */
if (wanted_inner_mode != VOIDmode
&& GET_MODE_SIZE (wanted_inner_mode) < GET_MODE_SIZE (is_mode)
- && ((GET_CODE (inner) == MEM
+ && ((MEM_P (inner)
&& (inner_mode == wanted_inner_mode
|| (! mode_dependent_address_p (XEXP (inner, 0))
&& ! MEM_VOLATILE_P (inner))))))
/* If INNER is not memory, we can always get it into the proper mode. If we
are changing its mode, POS must be a constant and smaller than the size
of the new mode. */
- else if (GET_CODE (inner) != MEM)
+ else if (!MEM_P (inner))
{
if (GET_MODE (inner) != wanted_inner_mode
&& (pos_rtx != 0
if (GET_CODE (XEXP (x, 1)) == CONST_INT
&& (INTVAL (XEXP (x, 1)) & ((((HOST_WIDE_INT) 1 << count)) - 1)) == 0
&& (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
- return gen_binary (code, mode, tem,
- GEN_INT (INTVAL (XEXP (x, 1)) >> count));
+ return simplify_gen_binary (code, mode, tem,
+ GEN_INT (INTVAL (XEXP (x, 1)) >> count));
break;
{
/* Get the bit number of the first 1 bit from the right, -1 if none. */
int pos = exact_log2 (m & -m);
- int len;
-
- if (pos < 0)
- return -1;
+ int len = 0;
- /* Now shift off the low-order zero bits and see if we have a power of
- two minus 1. */
- len = exact_log2 ((m >> pos) + 1);
+ if (pos >= 0)
+ /* Now shift off the low-order zero bits and see if we have a
+ power of two minus 1. */
+ len = exact_log2 ((m >> pos) + 1);
if (len <= 0)
- return -1;
+ pos = -1;
*plen = len;
return pos;
&& (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
return gen_lowpart (mode, x);
- /* If we aren't changing the mode, X is not a SUBREG, and all zero bits in
- MASK are already known to be zero in X, we need not do anything. */
- if (GET_MODE (x) == mode && code != SUBREG && (~mask & nonzero) == 0)
- return x;
-
switch (code)
{
case CLOBBER:
&& (cval & ((HOST_WIDE_INT) 1 << (width - 1))) != 0)
cval |= (HOST_WIDE_INT) -1 << width;
- y = gen_binary (AND, GET_MODE (x), XEXP (x, 0), GEN_INT (cval));
+ y = simplify_gen_binary (AND, GET_MODE (x),
+ XEXP (x, 0), GEN_INT (cval));
if (rtx_cost (y, SET) < rtx_cost (x, SET))
x = y;
}
{
temp = GEN_INT ((INTVAL (XEXP (x, 1)) & mask)
<< INTVAL (XEXP (XEXP (x, 0), 1)));
- temp = gen_binary (GET_CODE (x), GET_MODE (x),
- XEXP (XEXP (x, 0), 0), temp);
- x = gen_binary (LSHIFTRT, GET_MODE (x), temp,
- XEXP (XEXP (x, 0), 1));
+ temp = simplify_gen_binary (GET_CODE (x), GET_MODE (x),
+ XEXP (XEXP (x, 0), 0), temp);
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), temp,
+ XEXP (XEXP (x, 0), 1));
return force_to_mode (x, mode, mask, reg, next_select);
}
reg, next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
- x = gen_binary (code, op_mode, op0, op1);
+ x = simplify_gen_binary (code, op_mode, op0, op1);
break;
case ASHIFT:
mask, reg, next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
- x = gen_binary (code, op_mode, op0, XEXP (x, 1));
+ x = simplify_gen_binary (code, op_mode, op0, XEXP (x, 1));
break;
case LSHIFTRT:
/* We can only change the mode of the shift if we can do arithmetic
in the mode of the shift and INNER_MASK is no wider than the
- width of OP_MODE. */
- if (GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT
- || (inner_mask & ~GET_MODE_MASK (op_mode)) != 0)
+ width of X's mode. */
+ if ((inner_mask & ~GET_MODE_MASK (GET_MODE (x))) != 0)
op_mode = GET_MODE (x);
inner = force_to_mode (inner, op_mode, inner_mask, reg, next_select);
if (GET_MODE (x) != op_mode || inner != XEXP (x, 0))
- x = gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
+ x = simplify_gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
}
/* If we have (and (lshiftrt FOO C1) C2) where the combination of the
/* Must be more sign bit copies than the mask needs. */
&& ((int) num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
>= exact_log2 (mask + 1)))
- x = gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
- GEN_INT (GET_MODE_BITSIZE (GET_MODE (x))
- - exact_log2 (mask + 1)));
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
+ GEN_INT (GET_MODE_BITSIZE (GET_MODE (x))
+ - exact_log2 (mask + 1)));
goto shiftrt;
/* If MASK is 1, convert this to an LSHIFTRT. This can be done
even if the shift count isn't a constant. */
if (mask == 1)
- x = gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0), XEXP (x, 1));
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
+ XEXP (x, 0), XEXP (x, 1));
shiftrt:
{
temp = gen_int_mode (mask << INTVAL (XEXP (XEXP (x, 0), 1)),
GET_MODE (x));
- temp = gen_binary (XOR, GET_MODE (x), XEXP (XEXP (x, 0), 0), temp);
- x = gen_binary (LSHIFTRT, GET_MODE (x), temp, XEXP (XEXP (x, 0), 1));
+ temp = simplify_gen_binary (XOR, GET_MODE (x),
+ XEXP (XEXP (x, 0), 0), temp);
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
+ temp, XEXP (XEXP (x, 0), 1));
return force_to_mode (x, mode, mask, reg, next_select);
}
in STORE_FLAG_VALUE and FOO has a single bit that might be nonzero,
which is equal to STORE_FLAG_VALUE. */
if ((mask & ~STORE_FLAG_VALUE) == 0 && XEXP (x, 1) == const0_rtx
+ && GET_MODE (XEXP (x, 0)) == mode
&& exact_log2 (nonzero_bits (XEXP (x, 0), mode)) >= 0
&& (nonzero_bits (XEXP (x, 0), mode)
== (unsigned HOST_WIDE_INT) STORE_FLAG_VALUE))
else if (cond1 == 0)
true1 = copy_rtx (true1);
- *ptrue = gen_binary (code, mode, true0, true1);
- *pfalse = gen_binary (code, mode, false0, false1);
+ if (COMPARISON_P (x))
+ {
+ *ptrue = simplify_gen_relational (code, mode, VOIDmode,
+ true0, true1);
+ *pfalse = simplify_gen_relational (code, mode, VOIDmode,
+ false0, false1);
+ }
+ else
+ {
+ *ptrue = simplify_gen_binary (code, mode, true0, true1);
+ *pfalse = simplify_gen_binary (code, mode, false0, false1);
+ }
+
return cond0 ? cond0 : cond1;
}
if (COMPARISON_P (cond0)
&& COMPARISON_P (cond1)
- && ((GET_CODE (cond0) == combine_reversed_comparison_code (cond1)
+ && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
|| ((swap_condition (GET_CODE (cond0))
- == combine_reversed_comparison_code (cond1))
+ == reversed_comparison_code (cond1, NULL))
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
&& ! side_effects_p (x))
{
- *ptrue = gen_binary (MULT, mode, op0, const_true_rtx);
- *pfalse = gen_binary (MULT, mode,
- (code == MINUS
- ? simplify_gen_unary (NEG, mode, op1,
- mode)
- : op1),
- const_true_rtx);
+ *ptrue = simplify_gen_binary (MULT, mode, op0, const_true_rtx);
+ *pfalse = simplify_gen_binary (MULT, mode,
+ (code == MINUS
+ ? simplify_gen_unary (NEG, mode,
+ op1, mode)
+ : op1),
+ const_true_rtx);
return cond0;
}
}
if (COMPARISON_P (cond0)
&& COMPARISON_P (cond1)
- && ((GET_CODE (cond0) == combine_reversed_comparison_code (cond1)
+ && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
|| ((swap_condition (GET_CODE (cond0))
- == combine_reversed_comparison_code (cond1))
+ == reversed_comparison_code (cond1, NULL))
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
&& ! side_effects_p (x))
&& 0 != (cond0 = if_then_else_cond (SUBREG_REG (x),
&true0, &false0)))
{
- *ptrue = simplify_gen_subreg (mode, true0,
+ true0 = simplify_gen_subreg (mode, true0,
+ GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x));
+ false0 = simplify_gen_subreg (mode, false0,
GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x));
- *pfalse = simplify_gen_subreg (mode, false0,
- GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x));
-
- return cond0;
+ if (true0 && false0)
+ {
+ *ptrue = true0;
+ *pfalse = false0;
+ return cond0;
+ }
}
/* If X is a constant, this isn't special and will cause confusions
if (comparison_dominates_p (cond, code))
return const_true_rtx;
- code = combine_reversed_comparison_code (x);
+ code = reversed_comparison_code (x, NULL);
if (code != UNKNOWN
&& comparison_dominates_p (cond, code))
return const0_rtx;
/* Check for a paradoxical SUBREG of a MEM compared with the MEM.
Note that all SUBREGs of MEM are paradoxical; otherwise they
would have been rewritten. */
- if (GET_CODE (x) == MEM && GET_CODE (y) == SUBREG
- && GET_CODE (SUBREG_REG (y)) == MEM
+ if (MEM_P (x) && GET_CODE (y) == SUBREG
+ && MEM_P (SUBREG_REG (y))
&& rtx_equal_p (SUBREG_REG (y),
gen_lowpart (GET_MODE (SUBREG_REG (y)), x)))
return 1;
- if (GET_CODE (y) == MEM && GET_CODE (x) == SUBREG
- && GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (y) && GET_CODE (x) == SUBREG
+ && MEM_P (SUBREG_REG (x))
&& rtx_equal_p (SUBREG_REG (x),
gen_lowpart (GET_MODE (SUBREG_REG (x)), y)))
return 1;
return x;
}
- else if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == SUBREG
- && subreg_lowpart_p (XEXP (src, 0))
- && (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
- && GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
- && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
- && INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
- && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
+ if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == SUBREG
+ && subreg_lowpart_p (XEXP (src, 0))
+ && (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
+ < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
+ && GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
+ && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
+ && INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
+ && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
assign = make_extraction (VOIDmode, dest, 0,
XEXP (SUBREG_REG (XEXP (src, 0)), 1),
/* If SRC is (ior (ashift (const_int 1) POS) DEST), this is a set of a
one-bit field. */
- else if (GET_CODE (src) == IOR && GET_CODE (XEXP (src, 0)) == ASHIFT
- && XEXP (XEXP (src, 0), 0) == const1_rtx
- && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
+ if (GET_CODE (src) == IOR && GET_CODE (XEXP (src, 0)) == ASHIFT
+ && XEXP (XEXP (src, 0), 0) == const1_rtx
+ && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
assign = make_extraction (VOIDmode, dest, 0, XEXP (XEXP (src, 0), 1),
1, 1, 1, 0);
return x;
}
+ /* If DEST is already a field assignment, i.e. ZERO_EXTRACT, and the
+ SRC is an AND with all bits of that field set, then we can discard
+ the AND. */
+ if (GET_CODE (dest) == ZERO_EXTRACT
+ && GET_CODE (XEXP (dest, 1)) == CONST_INT
+ && GET_CODE (src) == AND
+ && GET_CODE (XEXP (src, 1)) == CONST_INT)
+ {
+ HOST_WIDE_INT width = INTVAL (XEXP (dest, 1));
+ unsigned HOST_WIDE_INT and_mask = INTVAL (XEXP (src, 1));
+ unsigned HOST_WIDE_INT ze_mask;
+
+ if (width >= HOST_BITS_PER_WIDE_INT)
+ ze_mask = -1;
+ else
+ ze_mask = ((unsigned HOST_WIDE_INT)1 << width) - 1;
+
+ /* Complete overlap. We can remove the source AND. */
+ if ((and_mask & ze_mask) == ze_mask)
+ return gen_rtx_SET (VOIDmode, dest, XEXP (src, 0));
+
+ /* Partial overlap. We can reduce the source AND. */
+ if ((and_mask & ze_mask) != and_mask)
+ {
+ mode = GET_MODE (src);
+ src = gen_rtx_AND (mode, XEXP (src, 0),
+ gen_int_mode (and_mask & ze_mask, mode));
+ return gen_rtx_SET (VOIDmode, dest, src);
+ }
+ }
+
/* The other case we handle is assignments into a constant-position
field. They look like (ior/xor (and DEST C1) OTHER). If C1 represents
a mask that has all one bits except for a group of zero bits and
|| GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))) > UNITS_PER_WORD)
return x;
- tem = gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
- SUBREG_REG (lhs), SUBREG_REG (rhs));
+ tem = simplify_gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
+ SUBREG_REG (lhs), SUBREG_REG (rhs));
return gen_lowpart (GET_MODE (x), tem);
default:
return x;
/* Form the new inner operation, seeing if it simplifies first. */
- tem = gen_binary (code, GET_MODE (x), lhs, rhs);
+ tem = simplify_gen_binary (code, GET_MODE (x), lhs, rhs);
/* There is one exception to the general way of distributing:
(a | c) ^ (b | c) -> (a ^ b) & ~c */
/* We may be able to continuing distributing the result, so call
ourselves recursively on the inner operation before forming the
outer operation, which we return. */
- return gen_binary (inner_code, GET_MODE (x),
- apply_distributive_law (tem), other);
+ return simplify_gen_binary (inner_code, GET_MODE (x),
+ apply_distributive_law (tem), other);
+}
+
+/* See if X is of the form (* (+ A B) C), and if so convert to
+ (+ (* A C) (* B C)) and try to simplify.
+
+ Most of the time, this results in no change. However, if some of
+ the operands are the same or inverses of each other, simplifications
+ will result.
+
+ For example, (and (ior A B) (not B)) can occur as the result of
+ expanding a bit field assignment. When we apply the distributive
+ law to this, we get (ior (and (A (not B))) (and (B (not B)))),
+ which then simplifies to (and (A (not B))).
+
+ Note that no checks happen on the validity of applying the inverse
+ distributive law. This is pointless since we can do it in the
+ few places where this routine is called.
+
+ N is the index of the term that is decomposed (the arithmetic operation,
+ i.e. (+ A B) in the first example above). !N is the index of the term that
+ is distributed, i.e. of C in the first example above. */
+static rtx
+distribute_and_simplify_rtx (rtx x, int n)
+{
+ enum machine_mode mode;
+ enum rtx_code outer_code, inner_code;
+ rtx decomposed, distributed, inner_op0, inner_op1, new_op0, new_op1, tmp;
+
+ decomposed = XEXP (x, n);
+ if (!ARITHMETIC_P (decomposed))
+ return NULL_RTX;
+
+ mode = GET_MODE (x);
+ outer_code = GET_CODE (x);
+ distributed = XEXP (x, !n);
+
+ inner_code = GET_CODE (decomposed);
+ inner_op0 = XEXP (decomposed, 0);
+ inner_op1 = XEXP (decomposed, 1);
+
+ /* Special case (and (xor B C) (not A)), which is equivalent to
+ (xor (ior A B) (ior A C)) */
+ if (outer_code == AND && inner_code == XOR && GET_CODE (distributed) == NOT)
+ {
+ distributed = XEXP (distributed, 0);
+ outer_code = IOR;
+ }
+
+ if (n == 0)
+ {
+ /* Distribute the second term. */
+ new_op0 = simplify_gen_binary (outer_code, mode, inner_op0, distributed);
+ new_op1 = simplify_gen_binary (outer_code, mode, inner_op1, distributed);
+ }
+ else
+ {
+ /* Distribute the first term. */
+ new_op0 = simplify_gen_binary (outer_code, mode, distributed, inner_op0);
+ new_op1 = simplify_gen_binary (outer_code, mode, distributed, inner_op1);
+ }
+
+ tmp = apply_distributive_law (simplify_gen_binary (inner_code, mode,
+ new_op0, new_op1));
+ if (GET_CODE (tmp) != outer_code
+ && rtx_cost (tmp, SET) < rtx_cost (x, SET))
+ return tmp;
+
+ return NULL_RTX;
}
\f
/* We have X, a logical `and' of VAROP with the constant CONSTOP, to be done
/* If VAROP is a CONST_INT, then we need to apply the mask in CONSTOP
to VAROP and return the new constant. */
if (GET_CODE (varop) == CONST_INT)
- return GEN_INT (trunc_int_for_mode (INTVAL (varop) & constop, mode));
+ return gen_int_mode (INTVAL (varop) & constop, mode);
/* See what bits may be nonzero in VAROP. Unlike the general case of
a call to nonzero_bits, here we don't care about bits outside
gen_lowpart
(mode,
apply_distributive_law
- (gen_binary (GET_CODE (varop), GET_MODE (varop),
- simplify_and_const_int (NULL_RTX, GET_MODE (varop),
- XEXP (varop, 0), constop),
- simplify_and_const_int (NULL_RTX, GET_MODE (varop),
- XEXP (varop, 1), constop))));
+ (simplify_gen_binary (GET_CODE (varop), GET_MODE (varop),
+ simplify_and_const_int (NULL_RTX,
+ GET_MODE (varop),
+ XEXP (varop, 0),
+ constop),
+ simplify_and_const_int (NULL_RTX,
+ GET_MODE (varop),
+ XEXP (varop, 1),
+ constop))));
/* If VAROP is PLUS, and the constant is a mask of low bite, distribute
the AND and see if one of the operands simplifies to zero. If so, we
constop = trunc_int_for_mode (constop, mode);
/* See how much, if any, of X we can use. */
if (x == 0 || GET_CODE (x) != AND || GET_MODE (x) != mode)
- x = gen_binary (AND, mode, varop, GEN_INT (constop));
+ x = simplify_gen_binary (AND, mode, varop, GEN_INT (constop));
else
{
return x;
}
\f
-#define nonzero_bits_with_known(X, MODE) \
- cached_nonzero_bits (X, MODE, known_x, known_mode, known_ret)
+/* Given a REG, X, compute which bits in X can be nonzero.
+ We don't care about bits outside of those defined in MODE.
-/* The function cached_nonzero_bits is a wrapper around nonzero_bits1.
- It avoids exponential behavior in nonzero_bits1 when X has
- identical subexpressions on the first or the second level. */
+ For most X this is simply GET_MODE_MASK (GET_MODE (MODE)), but if X is
+ a shift, AND, or zero_extract, we can do better. */
-static unsigned HOST_WIDE_INT
-cached_nonzero_bits (rtx x, enum machine_mode mode, rtx known_x,
- enum machine_mode known_mode,
- unsigned HOST_WIDE_INT known_ret)
+static rtx
+reg_nonzero_bits_for_combine (rtx x, enum machine_mode mode,
+ rtx known_x ATTRIBUTE_UNUSED,
+ enum machine_mode known_mode ATTRIBUTE_UNUSED,
+ unsigned HOST_WIDE_INT known_ret ATTRIBUTE_UNUSED,
+ unsigned HOST_WIDE_INT *nonzero)
{
- if (x == known_x && mode == known_mode)
- return known_ret;
+ rtx tem;
- /* Try to find identical subexpressions. If found call
- nonzero_bits1 on X with the subexpressions as KNOWN_X and the
- precomputed value for the subexpression as KNOWN_RET. */
+ /* If X is a register whose nonzero bits value is current, use it.
+ Otherwise, if X is a register whose value we can find, use that
+ value. Otherwise, use the previously-computed global nonzero bits
+ for this register. */
- if (ARITHMETIC_P (x))
+ if (reg_stat[REGNO (x)].last_set_value != 0
+ && (reg_stat[REGNO (x)].last_set_mode == mode
+ || (GET_MODE_CLASS (reg_stat[REGNO (x)].last_set_mode) == MODE_INT
+ && GET_MODE_CLASS (mode) == MODE_INT))
+ && (reg_stat[REGNO (x)].last_set_label == label_tick
+ || (REGNO (x) >= FIRST_PSEUDO_REGISTER
+ && REG_N_SETS (REGNO (x)) == 1
+ && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
+ REGNO (x))))
+ && INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
- rtx x0 = XEXP (x, 0);
- rtx x1 = XEXP (x, 1);
+ *nonzero &= reg_stat[REGNO (x)].last_set_nonzero_bits;
+ return NULL;
+ }
- /* Check the first level. */
- if (x0 == x1)
- return nonzero_bits1 (x, mode, x0, mode,
- nonzero_bits_with_known (x0, mode));
+ tem = get_last_value (x);
- /* Check the second level. */
- if (ARITHMETIC_P (x0)
- && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
- return nonzero_bits1 (x, mode, x1, mode,
- nonzero_bits_with_known (x1, mode));
-
- if (ARITHMETIC_P (x1)
- && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
- return nonzero_bits1 (x, mode, x0, mode,
- nonzero_bits_with_known (x0, mode));
- }
-
- return nonzero_bits1 (x, mode, known_x, known_mode, known_ret);
-}
-
-/* We let num_sign_bit_copies recur into nonzero_bits as that is useful.
- We don't let nonzero_bits recur into num_sign_bit_copies, because that
- is less useful. We can't allow both, because that results in exponential
- run time recursion. There is a nullstone testcase that triggered
- this. This macro avoids accidental uses of num_sign_bit_copies. */
-#define cached_num_sign_bit_copies()
-
-/* Given an expression, X, compute which bits in X can be nonzero.
- We don't care about bits outside of those defined in MODE.
-
- For most X this is simply GET_MODE_MASK (GET_MODE (MODE)), but if X is
- a shift, AND, or zero_extract, we can do better. */
-
-static unsigned HOST_WIDE_INT
-nonzero_bits1 (rtx x, enum machine_mode mode, rtx known_x,
- enum machine_mode known_mode,
- unsigned HOST_WIDE_INT known_ret)
-{
- unsigned HOST_WIDE_INT nonzero = GET_MODE_MASK (mode);
- unsigned HOST_WIDE_INT inner_nz;
- enum rtx_code code;
- unsigned int mode_width = GET_MODE_BITSIZE (mode);
- rtx tem;
-
- /* For floating-point values, assume all bits are needed. */
- if (FLOAT_MODE_P (GET_MODE (x)) || FLOAT_MODE_P (mode))
- return nonzero;
-
- /* If X is wider than MODE, use its mode instead. */
- if (GET_MODE_BITSIZE (GET_MODE (x)) > mode_width)
+ if (tem)
{
- mode = GET_MODE (x);
- nonzero = GET_MODE_MASK (mode);
- mode_width = GET_MODE_BITSIZE (mode);
- }
-
- if (mode_width > HOST_BITS_PER_WIDE_INT)
- /* Our only callers in this case look for single bit values. So
- just return the mode mask. Those tests will then be false. */
- return nonzero;
-
-#ifndef WORD_REGISTER_OPERATIONS
- /* If MODE is wider than X, but both are a single word for both the host
- and target machines, we can compute this from which bits of the
- object might be nonzero in its own mode, taking into account the fact
- that on many CISC machines, accessing an object in a wider mode
- causes the high-order bits to become undefined. So they are
- not known to be zero. */
-
- if (GET_MODE (x) != VOIDmode && GET_MODE (x) != mode
- && GET_MODE_BITSIZE (GET_MODE (x)) <= BITS_PER_WORD
- && GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT
- && GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (GET_MODE (x)))
- {
- nonzero &= nonzero_bits_with_known (x, GET_MODE (x));
- nonzero |= GET_MODE_MASK (mode) & ~GET_MODE_MASK (GET_MODE (x));
- return nonzero;
- }
-#endif
-
- code = GET_CODE (x);
- switch (code)
- {
- case REG:
-#if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend)
- /* If pointers extend unsigned and this is a pointer in Pmode, say that
- all the bits above ptr_mode are known to be zero. */
- if (POINTERS_EXTEND_UNSIGNED && GET_MODE (x) == Pmode
- && REG_POINTER (x))
- nonzero &= GET_MODE_MASK (ptr_mode);
-#endif
-
- /* Include declared information about alignment of pointers. */
- /* ??? We don't properly preserve REG_POINTER changes across
- pointer-to-integer casts, so we can't trust it except for
- things that we know must be pointers. See execute/960116-1.c. */
- if ((x == stack_pointer_rtx
- || x == frame_pointer_rtx
- || x == arg_pointer_rtx)
- && REGNO_POINTER_ALIGN (REGNO (x)))
- {
- unsigned HOST_WIDE_INT alignment
- = REGNO_POINTER_ALIGN (REGNO (x)) / BITS_PER_UNIT;
-
-#ifdef PUSH_ROUNDING
- /* If PUSH_ROUNDING is defined, it is possible for the
- stack to be momentarily aligned only to that amount,
- so we pick the least alignment. */
- if (x == stack_pointer_rtx && PUSH_ARGS)
- alignment = MIN ((unsigned HOST_WIDE_INT) PUSH_ROUNDING (1),
- alignment);
-#endif
-
- nonzero &= ~(alignment - 1);
- }
-
- /* If X is a register whose nonzero bits value is current, use it.
- Otherwise, if X is a register whose value we can find, use that
- value. Otherwise, use the previously-computed global nonzero bits
- for this register. */
-
- if (reg_last_set_value[REGNO (x)] != 0
- && (reg_last_set_mode[REGNO (x)] == mode
- || (GET_MODE_CLASS (reg_last_set_mode[REGNO (x)]) == MODE_INT
- && GET_MODE_CLASS (mode) == MODE_INT))
- && (reg_last_set_label[REGNO (x)] == label_tick
- || (REGNO (x) >= FIRST_PSEUDO_REGISTER
- && REG_N_SETS (REGNO (x)) == 1
- && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
- REGNO (x))))
- && INSN_CUID (reg_last_set[REGNO (x)]) < subst_low_cuid)
- return reg_last_set_nonzero_bits[REGNO (x)] & nonzero;
-
- tem = get_last_value (x);
-
- if (tem)
- {
-#ifdef SHORT_IMMEDIATES_SIGN_EXTEND
- /* If X is narrower than MODE and TEM is a non-negative
- constant that would appear negative in the mode of X,
- sign-extend it for use in reg_nonzero_bits because some
- machines (maybe most) will actually do the sign-extension
- and this is the conservative approach.
-
- ??? For 2.5, try to tighten up the MD files in this regard
- instead of this kludge. */
-
- if (GET_MODE_BITSIZE (GET_MODE (x)) < mode_width
- && GET_CODE (tem) == CONST_INT
- && INTVAL (tem) > 0
- && 0 != (INTVAL (tem)
- & ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (x)) - 1))))
- tem = GEN_INT (INTVAL (tem)
- | ((HOST_WIDE_INT) (-1)
- << GET_MODE_BITSIZE (GET_MODE (x))));
-#endif
- return nonzero_bits_with_known (tem, mode) & nonzero;
- }
- else if (nonzero_sign_valid && reg_nonzero_bits[REGNO (x)])
- {
- unsigned HOST_WIDE_INT mask = reg_nonzero_bits[REGNO (x)];
-
- if (GET_MODE_BITSIZE (GET_MODE (x)) < mode_width)
- /* We don't know anything about the upper bits. */
- mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
- return nonzero & mask;
- }
- else
- return nonzero;
-
- case CONST_INT:
#ifdef SHORT_IMMEDIATES_SIGN_EXTEND
- /* If X is negative in MODE, sign-extend the value. */
- if (INTVAL (x) > 0 && mode_width < BITS_PER_WORD
- && 0 != (INTVAL (x) & ((HOST_WIDE_INT) 1 << (mode_width - 1))))
- return (INTVAL (x) | ((HOST_WIDE_INT) (-1) << mode_width));
-#endif
-
- return INTVAL (x);
-
- case MEM:
-#ifdef LOAD_EXTEND_OP
- /* In many, if not most, RISC machines, reading a byte from memory
- zeros the rest of the register. Noticing that fact saves a lot
- of extra zero-extends. */
- if (LOAD_EXTEND_OP (GET_MODE (x)) == ZERO_EXTEND)
- nonzero &= GET_MODE_MASK (GET_MODE (x));
-#endif
- break;
-
- case EQ: case NE:
- case UNEQ: case LTGT:
- case GT: case GTU: case UNGT:
- case LT: case LTU: case UNLT:
- case GE: case GEU: case UNGE:
- case LE: case LEU: case UNLE:
- case UNORDERED: case ORDERED:
-
- /* If this produces an integer result, we know which bits are set.
- Code here used to clear bits outside the mode of X, but that is
- now done above. */
-
- if (GET_MODE_CLASS (mode) == MODE_INT
- && mode_width <= HOST_BITS_PER_WIDE_INT)
- nonzero = STORE_FLAG_VALUE;
- break;
-
- case NEG:
-#if 0
- /* Disabled to avoid exponential mutual recursion between nonzero_bits
- and num_sign_bit_copies. */
- if (num_sign_bit_copies (XEXP (x, 0), GET_MODE (x))
- == GET_MODE_BITSIZE (GET_MODE (x)))
- nonzero = 1;
-#endif
-
- if (GET_MODE_SIZE (GET_MODE (x)) < mode_width)
- nonzero |= (GET_MODE_MASK (mode) & ~GET_MODE_MASK (GET_MODE (x)));
- break;
-
- case ABS:
-#if 0
- /* Disabled to avoid exponential mutual recursion between nonzero_bits
- and num_sign_bit_copies. */
- if (num_sign_bit_copies (XEXP (x, 0), GET_MODE (x))
- == GET_MODE_BITSIZE (GET_MODE (x)))
- nonzero = 1;
-#endif
- break;
-
- case TRUNCATE:
- nonzero &= (nonzero_bits_with_known (XEXP (x, 0), mode)
- & GET_MODE_MASK (mode));
- break;
-
- case ZERO_EXTEND:
- nonzero &= nonzero_bits_with_known (XEXP (x, 0), mode);
- if (GET_MODE (XEXP (x, 0)) != VOIDmode)
- nonzero &= GET_MODE_MASK (GET_MODE (XEXP (x, 0)));
- break;
-
- case SIGN_EXTEND:
- /* If the sign bit is known clear, this is the same as ZERO_EXTEND.
- Otherwise, show all the bits in the outer mode but not the inner
- may be nonzero. */
- inner_nz = nonzero_bits_with_known (XEXP (x, 0), mode);
- if (GET_MODE (XEXP (x, 0)) != VOIDmode)
- {
- inner_nz &= GET_MODE_MASK (GET_MODE (XEXP (x, 0)));
- if (inner_nz
- & (((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))) - 1))))
- inner_nz |= (GET_MODE_MASK (mode)
- & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0))));
- }
-
- nonzero &= inner_nz;
- break;
-
- case AND:
- nonzero &= (nonzero_bits_with_known (XEXP (x, 0), mode)
- & nonzero_bits_with_known (XEXP (x, 1), mode));
- break;
-
- case XOR: case IOR:
- case UMIN: case UMAX: case SMIN: case SMAX:
- {
- unsigned HOST_WIDE_INT nonzero0 =
- nonzero_bits_with_known (XEXP (x, 0), mode);
-
- /* Don't call nonzero_bits for the second time if it cannot change
- anything. */
- if ((nonzero & nonzero0) != nonzero)
- nonzero &= (nonzero0
- | nonzero_bits_with_known (XEXP (x, 1), mode));
- }
- break;
-
- case PLUS: case MINUS:
- case MULT:
- case DIV: case UDIV:
- case MOD: case UMOD:
- /* We can apply the rules of arithmetic to compute the number of
- high- and low-order zero bits of these operations. We start by
- computing the width (position of the highest-order nonzero bit)
- and the number of low-order zero bits for each value. */
- {
- unsigned HOST_WIDE_INT nz0 =
- nonzero_bits_with_known (XEXP (x, 0), mode);
- unsigned HOST_WIDE_INT nz1 =
- nonzero_bits_with_known (XEXP (x, 1), mode);
- int sign_index = GET_MODE_BITSIZE (GET_MODE (x)) - 1;
- int width0 = floor_log2 (nz0) + 1;
- int width1 = floor_log2 (nz1) + 1;
- int low0 = floor_log2 (nz0 & -nz0);
- int low1 = floor_log2 (nz1 & -nz1);
- HOST_WIDE_INT op0_maybe_minusp
- = (nz0 & ((HOST_WIDE_INT) 1 << sign_index));
- HOST_WIDE_INT op1_maybe_minusp
- = (nz1 & ((HOST_WIDE_INT) 1 << sign_index));
- unsigned int result_width = mode_width;
- int result_low = 0;
-
- switch (code)
- {
- case PLUS:
- result_width = MAX (width0, width1) + 1;
- result_low = MIN (low0, low1);
- break;
- case MINUS:
- result_low = MIN (low0, low1);
- break;
- case MULT:
- result_width = width0 + width1;
- result_low = low0 + low1;
- break;
- case DIV:
- if (width1 == 0)
- break;
- if (! op0_maybe_minusp && ! op1_maybe_minusp)
- result_width = width0;
- break;
- case UDIV:
- if (width1 == 0)
- break;
- result_width = width0;
- break;
- case MOD:
- if (width1 == 0)
- break;
- if (! op0_maybe_minusp && ! op1_maybe_minusp)
- result_width = MIN (width0, width1);
- result_low = MIN (low0, low1);
- break;
- case UMOD:
- if (width1 == 0)
- break;
- result_width = MIN (width0, width1);
- result_low = MIN (low0, low1);
- break;
- default:
- abort ();
- }
-
- if (result_width < mode_width)
- nonzero &= ((HOST_WIDE_INT) 1 << result_width) - 1;
-
- if (result_low > 0)
- nonzero &= ~(((HOST_WIDE_INT) 1 << result_low) - 1);
-
-#ifdef POINTERS_EXTEND_UNSIGNED
- /* If pointers extend unsigned and this is an addition or subtraction
- to a pointer in Pmode, all the bits above ptr_mode are known to be
- zero. */
- if (POINTERS_EXTEND_UNSIGNED > 0 && GET_MODE (x) == Pmode
- && (code == PLUS || code == MINUS)
- && GET_CODE (XEXP (x, 0)) == REG && REG_POINTER (XEXP (x, 0)))
- nonzero &= GET_MODE_MASK (ptr_mode);
-#endif
- }
- break;
-
- case ZERO_EXTRACT:
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
- && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
- nonzero &= ((HOST_WIDE_INT) 1 << INTVAL (XEXP (x, 1))) - 1;
- break;
-
- case SUBREG:
- /* If this is a SUBREG formed for a promoted variable that has
- been zero-extended, we know that at least the high-order bits
- are zero, though others might be too. */
-
- if (SUBREG_PROMOTED_VAR_P (x) && SUBREG_PROMOTED_UNSIGNED_P (x) > 0)
- nonzero = (GET_MODE_MASK (GET_MODE (x))
- & nonzero_bits_with_known (SUBREG_REG (x), GET_MODE (x)));
-
- /* If the inner mode is a single word for both the host and target
- machines, we can compute this from which bits of the inner
- object might be nonzero. */
- if (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x))) <= BITS_PER_WORD
- && (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x)))
- <= HOST_BITS_PER_WIDE_INT))
- {
- nonzero &= nonzero_bits_with_known (SUBREG_REG (x), mode);
-
-#if defined (WORD_REGISTER_OPERATIONS) && defined (LOAD_EXTEND_OP)
- /* If this is a typical RISC machine, we only have to worry
- about the way loads are extended. */
- if ((LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (x))) == SIGN_EXTEND
- ? (((nonzero
- & (((unsigned HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x))) - 1))))
- != 0))
- : LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (x))) != ZERO_EXTEND)
- || GET_CODE (SUBREG_REG (x)) != MEM)
+ /* If X is narrower than MODE and TEM is a non-negative
+ constant that would appear negative in the mode of X,
+ sign-extend it for use in reg_nonzero_bits because some
+ machines (maybe most) will actually do the sign-extension
+ and this is the conservative approach.
+
+ ??? For 2.5, try to tighten up the MD files in this regard
+ instead of this kludge. */
+
+ if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode)
+ && GET_CODE (tem) == CONST_INT
+ && INTVAL (tem) > 0
+ && 0 != (INTVAL (tem)
+ & ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (GET_MODE (x)) - 1))))
+ tem = GEN_INT (INTVAL (tem)
+ | ((HOST_WIDE_INT) (-1)
+ << GET_MODE_BITSIZE (GET_MODE (x))));
#endif
- {
- /* On many CISC machines, accessing an object in a wider mode
- causes the high-order bits to become undefined. So they are
- not known to be zero. */
- if (GET_MODE_SIZE (GET_MODE (x))
- > GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
- nonzero |= (GET_MODE_MASK (GET_MODE (x))
- & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x))));
- }
- }
- break;
-
- case ASHIFTRT:
- case LSHIFTRT:
- case ASHIFT:
- case ROTATE:
- /* The nonzero bits are in two classes: any bits within MODE
- that aren't in GET_MODE (x) are always significant. The rest of the
- nonzero bits are those that are significant in the operand of
- the shift when shifted the appropriate number of bits. This
- shows that high-order bits are cleared by the right shift and
- low-order bits by left shifts. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
- && INTVAL (XEXP (x, 1)) >= 0
- && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
- {
- enum machine_mode inner_mode = GET_MODE (x);
- unsigned int width = GET_MODE_BITSIZE (inner_mode);
- int count = INTVAL (XEXP (x, 1));
- unsigned HOST_WIDE_INT mode_mask = GET_MODE_MASK (inner_mode);
- unsigned HOST_WIDE_INT op_nonzero =
- nonzero_bits_with_known (XEXP (x, 0), mode);
- unsigned HOST_WIDE_INT inner = op_nonzero & mode_mask;
- unsigned HOST_WIDE_INT outer = 0;
-
- if (mode_width > width)
- outer = (op_nonzero & nonzero & ~mode_mask);
-
- if (code == LSHIFTRT)
- inner >>= count;
- else if (code == ASHIFTRT)
- {
- inner >>= count;
-
- /* If the sign bit may have been nonzero before the shift, we
- need to mark all the places it could have been copied to
- by the shift as possibly nonzero. */
- if (inner & ((HOST_WIDE_INT) 1 << (width - 1 - count)))
- inner |= (((HOST_WIDE_INT) 1 << count) - 1) << (width - count);
- }
- else if (code == ASHIFT)
- inner <<= count;
- else
- inner = ((inner << (count % width)
- | (inner >> (width - (count % width)))) & mode_mask);
-
- nonzero &= (outer | inner);
- }
- break;
-
- case FFS:
- case POPCOUNT:
- /* This is at most the number of bits in the mode. */
- nonzero = ((HOST_WIDE_INT) 2 << (floor_log2 (mode_width))) - 1;
- break;
-
- case CLZ:
- /* If CLZ has a known value at zero, then the nonzero bits are
- that value, plus the number of bits in the mode minus one. */
- if (CLZ_DEFINED_VALUE_AT_ZERO (mode, nonzero))
- nonzero |= ((HOST_WIDE_INT) 1 << (floor_log2 (mode_width))) - 1;
- else
- nonzero = -1;
- break;
-
- case CTZ:
- /* If CTZ has a known value at zero, then the nonzero bits are
- that value, plus the number of bits in the mode minus one. */
- if (CTZ_DEFINED_VALUE_AT_ZERO (mode, nonzero))
- nonzero |= ((HOST_WIDE_INT) 1 << (floor_log2 (mode_width))) - 1;
- else
- nonzero = -1;
- break;
-
- case PARITY:
- nonzero = 1;
- break;
-
- case IF_THEN_ELSE:
- nonzero &= (nonzero_bits_with_known (XEXP (x, 1), mode)
- | nonzero_bits_with_known (XEXP (x, 2), mode));
- break;
-
- default:
- break;
+ return tem;
}
-
- return nonzero;
-}
-
-/* See the macro definition above. */
-#undef cached_num_sign_bit_copies
-\f
-#define num_sign_bit_copies_with_known(X, M) \
- cached_num_sign_bit_copies (X, M, known_x, known_mode, known_ret)
-
-/* The function cached_num_sign_bit_copies is a wrapper around
- num_sign_bit_copies1. It avoids exponential behavior in
- num_sign_bit_copies1 when X has identical subexpressions on the
- first or the second level. */
-
-static unsigned int
-cached_num_sign_bit_copies (rtx x, enum machine_mode mode, rtx known_x,
- enum machine_mode known_mode,
- unsigned int known_ret)
-{
- if (x == known_x && mode == known_mode)
- return known_ret;
-
- /* Try to find identical subexpressions. If found call
- num_sign_bit_copies1 on X with the subexpressions as KNOWN_X and
- the precomputed value for the subexpression as KNOWN_RET. */
-
- if (ARITHMETIC_P (x))
+ else if (nonzero_sign_valid && reg_stat[REGNO (x)].nonzero_bits)
{
- rtx x0 = XEXP (x, 0);
- rtx x1 = XEXP (x, 1);
-
- /* Check the first level. */
- if (x0 == x1)
- return
- num_sign_bit_copies1 (x, mode, x0, mode,
- num_sign_bit_copies_with_known (x0, mode));
-
- /* Check the second level. */
- if (ARITHMETIC_P (x0)
- && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
- return
- num_sign_bit_copies1 (x, mode, x1, mode,
- num_sign_bit_copies_with_known (x1, mode));
+ unsigned HOST_WIDE_INT mask = reg_stat[REGNO (x)].nonzero_bits;
- if (ARITHMETIC_P (x1)
- && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
- return
- num_sign_bit_copies1 (x, mode, x0, mode,
- num_sign_bit_copies_with_known (x0, mode));
+ if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode))
+ /* We don't know anything about the upper bits. */
+ mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
+ *nonzero &= mask;
}
- return num_sign_bit_copies1 (x, mode, known_x, known_mode, known_ret);
+ return NULL;
}
/* Return the number of bits at the high-order end of X that are known to
VOIDmode, X will be used in its own mode. The returned value will always
be between 1 and the number of bits in MODE. */
-static unsigned int
-num_sign_bit_copies1 (rtx x, enum machine_mode mode, rtx known_x,
- enum machine_mode known_mode,
- unsigned int known_ret)
+static rtx
+reg_num_sign_bit_copies_for_combine (rtx x, enum machine_mode mode,
+ rtx known_x ATTRIBUTE_UNUSED,
+ enum machine_mode known_mode
+ ATTRIBUTE_UNUSED,
+ unsigned int known_ret ATTRIBUTE_UNUSED,
+ unsigned int *result)
{
- enum rtx_code code = GET_CODE (x);
- unsigned int bitwidth;
- int num0, num1, result;
- unsigned HOST_WIDE_INT nonzero;
rtx tem;
- /* If we weren't given a mode, use the mode of X. If the mode is still
- VOIDmode, we don't know anything. Likewise if one of the modes is
- floating-point. */
-
- if (mode == VOIDmode)
- mode = GET_MODE (x);
-
- if (mode == VOIDmode || FLOAT_MODE_P (mode) || FLOAT_MODE_P (GET_MODE (x)))
- return 1;
-
- bitwidth = GET_MODE_BITSIZE (mode);
-
- /* For a smaller object, just ignore the high bits. */
- if (bitwidth < GET_MODE_BITSIZE (GET_MODE (x)))
- {
- num0 = num_sign_bit_copies_with_known (x, GET_MODE (x));
- return MAX (1,
- num0 - (int) (GET_MODE_BITSIZE (GET_MODE (x)) - bitwidth));
- }
-
- if (GET_MODE (x) != VOIDmode && bitwidth > GET_MODE_BITSIZE (GET_MODE (x)))
+ if (reg_stat[REGNO (x)].last_set_value != 0
+ && reg_stat[REGNO (x)].last_set_mode == mode
+ && (reg_stat[REGNO (x)].last_set_label == label_tick
+ || (REGNO (x) >= FIRST_PSEUDO_REGISTER
+ && REG_N_SETS (REGNO (x)) == 1
+ && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
+ REGNO (x))))
+ && INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
-#ifndef WORD_REGISTER_OPERATIONS
- /* If this machine does not do all register operations on the entire
- register and MODE is wider than the mode of X, we can say nothing
- at all about the high-order bits. */
- return 1;
-#else
- /* Likewise on machines that do, if the mode of the object is smaller
- than a word and loads of that size don't sign extend, we can say
- nothing about the high order bits. */
- if (GET_MODE_BITSIZE (GET_MODE (x)) < BITS_PER_WORD
-#ifdef LOAD_EXTEND_OP
- && LOAD_EXTEND_OP (GET_MODE (x)) != SIGN_EXTEND
-#endif
- )
- return 1;
-#endif
- }
-
- switch (code)
- {
- case REG:
-
-#if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend)
- /* If pointers extend signed and this is a pointer in Pmode, say that
- all the bits above ptr_mode are known to be sign bit copies. */
- if (! POINTERS_EXTEND_UNSIGNED && GET_MODE (x) == Pmode && mode == Pmode
- && REG_POINTER (x))
- return GET_MODE_BITSIZE (Pmode) - GET_MODE_BITSIZE (ptr_mode) + 1;
-#endif
-
- if (reg_last_set_value[REGNO (x)] != 0
- && reg_last_set_mode[REGNO (x)] == mode
- && (reg_last_set_label[REGNO (x)] == label_tick
- || (REGNO (x) >= FIRST_PSEUDO_REGISTER
- && REG_N_SETS (REGNO (x)) == 1
- && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
- REGNO (x))))
- && INSN_CUID (reg_last_set[REGNO (x)]) < subst_low_cuid)
- return reg_last_set_sign_bit_copies[REGNO (x)];
-
- tem = get_last_value (x);
- if (tem != 0)
- return num_sign_bit_copies_with_known (tem, mode);
-
- if (nonzero_sign_valid && reg_sign_bit_copies[REGNO (x)] != 0
- && GET_MODE_BITSIZE (GET_MODE (x)) == bitwidth)
- return reg_sign_bit_copies[REGNO (x)];
- break;
-
- case MEM:
-#ifdef LOAD_EXTEND_OP
- /* Some RISC machines sign-extend all loads of smaller than a word. */
- if (LOAD_EXTEND_OP (GET_MODE (x)) == SIGN_EXTEND)
- return MAX (1, ((int) bitwidth
- - (int) GET_MODE_BITSIZE (GET_MODE (x)) + 1));
-#endif
- break;
-
- case CONST_INT:
- /* If the constant is negative, take its 1's complement and remask.
- Then see how many zero bits we have. */
- nonzero = INTVAL (x) & GET_MODE_MASK (mode);
- if (bitwidth <= HOST_BITS_PER_WIDE_INT
- && (nonzero & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0)
- nonzero = (~nonzero) & GET_MODE_MASK (mode);
-
- return (nonzero == 0 ? bitwidth : bitwidth - floor_log2 (nonzero) - 1);
-
- case SUBREG:
- /* If this is a SUBREG for a promoted object that is sign-extended
- and we are looking at it in a wider mode, we know that at least the
- high-order bits are known to be sign bit copies. */
-
- if (SUBREG_PROMOTED_VAR_P (x) && ! SUBREG_PROMOTED_UNSIGNED_P (x))
- {
- num0 = num_sign_bit_copies_with_known (SUBREG_REG (x), mode);
- return MAX ((int) bitwidth
- - (int) GET_MODE_BITSIZE (GET_MODE (x)) + 1,
- num0);
- }
-
- /* For a smaller object, just ignore the high bits. */
- if (bitwidth <= GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x))))
- {
- num0 = num_sign_bit_copies_with_known (SUBREG_REG (x), VOIDmode);
- return MAX (1, (num0
- - (int) (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x)))
- - bitwidth)));
- }
-
-#ifdef WORD_REGISTER_OPERATIONS
-#ifdef LOAD_EXTEND_OP
- /* For paradoxical SUBREGs on machines where all register operations
- affect the entire register, just look inside. Note that we are
- passing MODE to the recursive call, so the number of sign bit copies
- will remain relative to that mode, not the inner mode. */
-
- /* This works only if loads sign extend. Otherwise, if we get a
- reload for the inner part, it may be loaded from the stack, and
- then we lose all sign bit copies that existed before the store
- to the stack. */
-
- if ((GET_MODE_SIZE (GET_MODE (x))
- > GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
- && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (x))) == SIGN_EXTEND
- && GET_CODE (SUBREG_REG (x)) == MEM)
- return num_sign_bit_copies_with_known (SUBREG_REG (x), mode);
-#endif
-#endif
- break;
-
- case SIGN_EXTRACT:
- if (GET_CODE (XEXP (x, 1)) == CONST_INT)
- return MAX (1, (int) bitwidth - INTVAL (XEXP (x, 1)));
- break;
-
- case SIGN_EXTEND:
- return (bitwidth - GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
- + num_sign_bit_copies_with_known (XEXP (x, 0), VOIDmode));
-
- case TRUNCATE:
- /* For a smaller object, just ignore the high bits. */
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), VOIDmode);
- return MAX (1, (num0 - (int) (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
- - bitwidth)));
-
- case NOT:
- return num_sign_bit_copies_with_known (XEXP (x, 0), mode);
-
- case ROTATE: case ROTATERT:
- /* If we are rotating left by a number of bits less than the number
- of sign bit copies, we can just subtract that amount from the
- number. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
- && INTVAL (XEXP (x, 1)) >= 0
- && INTVAL (XEXP (x, 1)) < (int) bitwidth)
- {
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- return MAX (1, num0 - (code == ROTATE ? INTVAL (XEXP (x, 1))
- : (int) bitwidth - INTVAL (XEXP (x, 1))));
- }
- break;
-
- case NEG:
- /* In general, this subtracts one sign bit copy. But if the value
- is known to be positive, the number of sign bit copies is the
- same as that of the input. Finally, if the input has just one bit
- that might be nonzero, all the bits are copies of the sign bit. */
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- if (bitwidth > HOST_BITS_PER_WIDE_INT)
- return num0 > 1 ? num0 - 1 : 1;
-
- nonzero = nonzero_bits (XEXP (x, 0), mode);
- if (nonzero == 1)
- return bitwidth;
-
- if (num0 > 1
- && (((HOST_WIDE_INT) 1 << (bitwidth - 1)) & nonzero))
- num0--;
-
- return num0;
-
- case IOR: case AND: case XOR:
- case SMIN: case SMAX: case UMIN: case UMAX:
- /* Logical operations will preserve the number of sign-bit copies.
- MIN and MAX operations always return one of the operands. */
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- num1 = num_sign_bit_copies_with_known (XEXP (x, 1), mode);
- return MIN (num0, num1);
-
- case PLUS: case MINUS:
- /* For addition and subtraction, we can have a 1-bit carry. However,
- if we are subtracting 1 from a positive number, there will not
- be such a carry. Furthermore, if the positive number is known to
- be 0 or 1, we know the result is either -1 or 0. */
-
- if (code == PLUS && XEXP (x, 1) == constm1_rtx
- && bitwidth <= HOST_BITS_PER_WIDE_INT)
- {
- nonzero = nonzero_bits (XEXP (x, 0), mode);
- if ((((HOST_WIDE_INT) 1 << (bitwidth - 1)) & nonzero) == 0)
- return (nonzero == 1 || nonzero == 0 ? bitwidth
- : bitwidth - floor_log2 (nonzero) - 1);
- }
-
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- num1 = num_sign_bit_copies_with_known (XEXP (x, 1), mode);
- result = MAX (1, MIN (num0, num1) - 1);
-
-#ifdef POINTERS_EXTEND_UNSIGNED
- /* If pointers extend signed and this is an addition or subtraction
- to a pointer in Pmode, all the bits above ptr_mode are known to be
- sign bit copies. */
- if (! POINTERS_EXTEND_UNSIGNED && GET_MODE (x) == Pmode
- && (code == PLUS || code == MINUS)
- && GET_CODE (XEXP (x, 0)) == REG && REG_POINTER (XEXP (x, 0)))
- result = MAX ((int) (GET_MODE_BITSIZE (Pmode)
- - GET_MODE_BITSIZE (ptr_mode) + 1),
- result);
-#endif
- return result;
-
- case MULT:
- /* The number of bits of the product is the sum of the number of
- bits of both terms. However, unless one of the terms if known
- to be positive, we must allow for an additional bit since negating
- a negative number can remove one sign bit copy. */
-
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- num1 = num_sign_bit_copies_with_known (XEXP (x, 1), mode);
-
- result = bitwidth - (bitwidth - num0) - (bitwidth - num1);
- if (result > 0
- && (bitwidth > HOST_BITS_PER_WIDE_INT
- || (((nonzero_bits (XEXP (x, 0), mode)
- & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0)
- && ((nonzero_bits (XEXP (x, 1), mode)
- & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0))))
- result--;
-
- return MAX (1, result);
-
- case UDIV:
- /* The result must be <= the first operand. If the first operand
- has the high bit set, we know nothing about the number of sign
- bit copies. */
- if (bitwidth > HOST_BITS_PER_WIDE_INT)
- return 1;
- else if ((nonzero_bits (XEXP (x, 0), mode)
- & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0)
- return 1;
- else
- return num_sign_bit_copies_with_known (XEXP (x, 0), mode);
-
- case UMOD:
- /* The result must be <= the second operand. */
- return num_sign_bit_copies_with_known (XEXP (x, 1), mode);
-
- case DIV:
- /* Similar to unsigned division, except that we have to worry about
- the case where the divisor is negative, in which case we have
- to add 1. */
- result = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- if (result > 1
- && (bitwidth > HOST_BITS_PER_WIDE_INT
- || (nonzero_bits (XEXP (x, 1), mode)
- & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0))
- result--;
-
- return result;
-
- case MOD:
- result = num_sign_bit_copies_with_known (XEXP (x, 1), mode);
- if (result > 1
- && (bitwidth > HOST_BITS_PER_WIDE_INT
- || (nonzero_bits (XEXP (x, 1), mode)
- & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0))
- result--;
-
- return result;
-
- case ASHIFTRT:
- /* Shifts by a constant add to the number of bits equal to the
- sign bit. */
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
- && INTVAL (XEXP (x, 1)) > 0)
- num0 = MIN ((int) bitwidth, num0 + INTVAL (XEXP (x, 1)));
-
- return num0;
-
- case ASHIFT:
- /* Left shifts destroy copies. */
- if (GET_CODE (XEXP (x, 1)) != CONST_INT
- || INTVAL (XEXP (x, 1)) < 0
- || INTVAL (XEXP (x, 1)) >= (int) bitwidth)
- return 1;
-
- num0 = num_sign_bit_copies_with_known (XEXP (x, 0), mode);
- return MAX (1, num0 - INTVAL (XEXP (x, 1)));
-
- case IF_THEN_ELSE:
- num0 = num_sign_bit_copies_with_known (XEXP (x, 1), mode);
- num1 = num_sign_bit_copies_with_known (XEXP (x, 2), mode);
- return MIN (num0, num1);
-
- case EQ: case NE: case GE: case GT: case LE: case LT:
- case UNEQ: case LTGT: case UNGE: case UNGT: case UNLE: case UNLT:
- case GEU: case GTU: case LEU: case LTU:
- case UNORDERED: case ORDERED:
- /* If the constant is negative, take its 1's complement and remask.
- Then see how many zero bits we have. */
- nonzero = STORE_FLAG_VALUE;
- if (bitwidth <= HOST_BITS_PER_WIDE_INT
- && (nonzero & ((HOST_WIDE_INT) 1 << (bitwidth - 1))) != 0)
- nonzero = (~nonzero) & GET_MODE_MASK (mode);
-
- return (nonzero == 0 ? bitwidth : bitwidth - floor_log2 (nonzero) - 1);
- break;
-
- default:
- break;
+ *result = reg_stat[REGNO (x)].last_set_sign_bit_copies;
+ return NULL;
}
- /* If we haven't been able to figure it out by one of the above rules,
- see if some of the high-order bits are known to be zero. If so,
- count those bits and return one less than that amount. If we can't
- safely compute the mask for this mode, always return BITWIDTH. */
+ tem = get_last_value (x);
+ if (tem != 0)
+ return tem;
- if (bitwidth > HOST_BITS_PER_WIDE_INT)
- return 1;
-
- nonzero = nonzero_bits (x, mode);
- return (nonzero & ((HOST_WIDE_INT) 1 << (bitwidth - 1))
- ? 1 : bitwidth - floor_log2 (nonzero) - 1);
+ if (nonzero_sign_valid && reg_stat[REGNO (x)].sign_bit_copies != 0
+ && GET_MODE_BITSIZE (GET_MODE (x)) == GET_MODE_BITSIZE (mode))
+ *result = reg_stat[REGNO (x)].sign_bit_copies;
+
+ return NULL;
}
\f
/* Return the number of "extended" bits there are in X, when interpreted
the width of this mode matter. It is assumed that the width of this mode
is smaller than or equal to HOST_BITS_PER_WIDE_INT.
- If *POP0 or OP1 are NIL, it means no operation is required. Only NEG, PLUS,
+ If *POP0 or OP1 are UNKNOWN, it means no operation is required. Only NEG, PLUS,
IOR, XOR, and AND are supported. We may set *POP0 to SET if the proper
result is simply *PCONST0.
if (op0 == AND)
const1 &= const0;
- /* If OP0 or OP1 is NIL, this is easy. Similarly if they are the same or
+ /* If OP0 or OP1 is UNKNOWN, this is easy. Similarly if they are the same or
if OP0 is SET. */
- if (op1 == NIL || op0 == SET)
+ if (op1 == UNKNOWN || op0 == SET)
return 1;
- else if (op0 == NIL)
+ else if (op0 == UNKNOWN)
op0 = op1, const0 = const1;
else if (op0 == op1)
const0 += const1;
break;
case NEG:
- op0 = NIL;
+ op0 = UNKNOWN;
break;
default:
break;
const0 &= GET_MODE_MASK (mode);
if (const0 == 0
&& (op0 == IOR || op0 == XOR || op0 == PLUS))
- op0 = NIL;
+ op0 = UNKNOWN;
else if (const0 == 0 && op0 == AND)
op0 = SET;
else if ((unsigned HOST_WIDE_INT) const0 == GET_MODE_MASK (mode)
&& op0 == AND)
- op0 = NIL;
+ op0 = UNKNOWN;
/* ??? Slightly redundant with the above mask, but not entirely.
Moving this above means we'd have to sign-extend the mode mask
unsigned int mode_words
= (GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD;
/* We form (outer_op (code varop count) (outer_const)). */
- enum rtx_code outer_op = NIL;
+ enum rtx_code outer_op = UNKNOWN;
HOST_WIDE_INT outer_const = 0;
rtx const_rtx;
int complement_p = 0;
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
- = gen_binary (ASHIFT, GET_MODE (varop), XEXP (varop, 0),
- GEN_INT (exact_log2 (INTVAL (XEXP (varop, 1)))));
+ = simplify_gen_binary (ASHIFT, GET_MODE (varop),
+ XEXP (varop, 0),
+ GEN_INT (exact_log2 (
+ INTVAL (XEXP (varop, 1)))));
continue;
}
break;
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
- = gen_binary (LSHIFTRT, GET_MODE (varop), XEXP (varop, 0),
- GEN_INT (exact_log2 (INTVAL (XEXP (varop, 1)))));
+ = simplify_gen_binary (LSHIFTRT, GET_MODE (varop),
+ XEXP (varop, 0),
+ GEN_INT (exact_log2 (
+ INTVAL (XEXP (varop, 1)))));
continue;
}
break;
logical expression, make a new logical expression, and apply
the inverse distributive law. This also can't be done
for some (ashiftrt (xor)). */
- if (code != ASHIFTRT || GET_CODE (varop)!= XOR
- || 0 <= trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
- shift_mode))
+ if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && !(code == ASHIFTRT && GET_CODE (varop) == XOR
+ && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
+ shift_mode)))
{
rtx lhs = simplify_shift_const (NULL_RTX, code, shift_mode,
XEXP (varop, 0), count);
rtx rhs = simplify_shift_const (NULL_RTX, code, shift_mode,
XEXP (varop, 1), count);
- varop = gen_binary (GET_CODE (varop), shift_mode, lhs, rhs);
+ varop = simplify_gen_binary (GET_CODE (varop), shift_mode,
+ lhs, rhs);
varop = apply_distributive_law (varop);
count = 0;
+ continue;
}
break;
varop = XEXP (varop, 0);
continue;
}
+
+ /* Check for 'PLUS signbit', which is the canonical form of 'XOR
+ signbit', and attempt to change the PLUS to an XOR and move it to
+ the outer operation as is done above in the AND/IOR/XOR case
+ leg for shift(logical). See details in logical handling above
+ for reasoning in doing so. */
+ if (code == LSHIFTRT
+ && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && mode_signbit_p (result_mode, XEXP (varop, 1))
+ && (new = simplify_binary_operation (code, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
+ && GET_CODE (new) == CONST_INT
+ && merge_outer_ops (&outer_op, &outer_const, XOR,
+ INTVAL (new), result_mode, &complement_p))
+ {
+ varop = XEXP (varop, 0);
+ continue;
+ }
+
break;
case MINUS:
/* We have now finished analyzing the shift. The result should be
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
- OUTER_OP is non-NIL, it is an operation that needs to be applied
+ OUTER_OP is non-UNKNOWN, it is an operation that needs to be applied
to the result of the shift. OUTER_CONST is the relevant constant,
but we must turn off all bits turned off in the shift.
for the outer operation. So try to do the simplification
recursively. */
- if (outer_op != NIL && GET_CODE (x) == code
+ if (outer_op != UNKNOWN && GET_CODE (x) == code
&& GET_CODE (XEXP (x, 1)) == CONST_INT)
x = simplify_shift_const (x, code, shift_mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
if (complement_p)
x = simplify_gen_unary (NOT, result_mode, x, result_mode);
- if (outer_op != NIL)
+ if (outer_op != UNKNOWN)
{
if (GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
outer_const = trunc_int_for_mode (outer_const, result_mode);
else if (GET_RTX_CLASS (outer_op) == RTX_UNARY)
x = simplify_gen_unary (outer_op, result_mode, x, result_mode);
else
- x = gen_binary (outer_op, result_mode, x, GEN_INT (outer_const));
+ x = simplify_gen_binary (outer_op, result_mode, x,
+ GEN_INT (outer_const));
}
return x;
for (i = XVECLEN (newpat, 0) - num_clobbers_to_add;
i < XVECLEN (newpat, 0); i++)
{
- if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) == REG
+ if (REG_P (XEXP (XVECEXP (newpat, 0, i), 0))
&& ! reg_dead_at_p (XEXP (XVECEXP (newpat, 0, i), 0), insn))
return -1;
notes = gen_rtx_EXPR_LIST (REG_UNUSED,
An insn containing that will not be recognized. */
static rtx
-gen_lowpart_for_combine (enum machine_mode mode, rtx x)
+gen_lowpart_for_combine (enum machine_mode omode, rtx x)
{
+ enum machine_mode imode = GET_MODE (x);
+ unsigned int osize = GET_MODE_SIZE (omode);
+ unsigned int isize = GET_MODE_SIZE (imode);
rtx result;
- if (GET_MODE (x) == mode)
+ if (omode == imode)
return x;
- /* Return identity if this is a CONST or symbolic
- reference. */
- if (mode == Pmode
+ /* Return identity if this is a CONST or symbolic reference. */
+ if (omode == Pmode
&& (GET_CODE (x) == CONST
|| GET_CODE (x) == SYMBOL_REF
|| GET_CODE (x) == LABEL_REF))
/* We can only support MODE being wider than a word if X is a
constant integer or has a mode the same size. */
-
- if (GET_MODE_SIZE (mode) > UNITS_PER_WORD
- && ! ((GET_MODE (x) == VOIDmode
+ if (GET_MODE_SIZE (omode) > UNITS_PER_WORD
+ && ! ((imode == VOIDmode
&& (GET_CODE (x) == CONST_INT
|| GET_CODE (x) == CONST_DOUBLE))
- || GET_MODE_SIZE (GET_MODE (x)) == GET_MODE_SIZE (mode)))
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ || isize == osize))
+ goto fail;
/* X might be a paradoxical (subreg (mem)). In that case, gen_lowpart
won't know what to do. So we will strip off the SUBREG here and
process normally. */
- if (GET_CODE (x) == SUBREG && GET_CODE (SUBREG_REG (x)) == MEM)
+ if (GET_CODE (x) == SUBREG && MEM_P (SUBREG_REG (x)))
{
x = SUBREG_REG (x);
- if (GET_MODE (x) == mode)
+
+ /* For use in case we fall down into the address adjustments
+ further below, we need to adjust the known mode and size of
+ x; imode and isize, since we just adjusted x. */
+ imode = GET_MODE (x);
+
+ if (imode == omode)
return x;
+
+ isize = GET_MODE_SIZE (imode);
}
- result = gen_lowpart_common (mode, x);
+ result = gen_lowpart_common (omode, x);
+
#ifdef CANNOT_CHANGE_MODE_CLASS
- if (result != 0
- && GET_CODE (result) == SUBREG
- && GET_CODE (SUBREG_REG (result)) == REG
- && REGNO (SUBREG_REG (result)) >= FIRST_PSEUDO_REGISTER)
- bitmap_set_bit (&subregs_of_mode, REGNO (SUBREG_REG (result))
- * MAX_MACHINE_MODE
- + GET_MODE (result));
+ if (result != 0 && GET_CODE (result) == SUBREG)
+ record_subregs_of_mode (result);
#endif
if (result)
return result;
- if (GET_CODE (x) == MEM)
+ if (MEM_P (x))
{
int offset = 0;
/* Refuse to work on a volatile memory ref or one with a mode-dependent
address. */
if (MEM_VOLATILE_P (x) || mode_dependent_address_p (XEXP (x, 0)))
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ goto fail;
/* If we want to refer to something bigger than the original memref,
generate a paradoxical subreg instead. That will force a reload
of the original memref X. */
- if (GET_MODE_SIZE (GET_MODE (x)) < GET_MODE_SIZE (mode))
- return gen_rtx_SUBREG (mode, x, 0);
+ if (isize < osize)
+ return gen_rtx_SUBREG (omode, x, 0);
if (WORDS_BIG_ENDIAN)
- offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD)
- - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
+ offset = MAX (isize, UNITS_PER_WORD) - MAX (osize, UNITS_PER_WORD);
+ /* Adjust the address so that the address-after-the-data is
+ unchanged. */
if (BYTES_BIG_ENDIAN)
- {
- /* Adjust the address so that the address-after-the-data is
- unchanged. */
- offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))
- - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x))));
- }
+ offset -= MIN (UNITS_PER_WORD, osize) - MIN (UNITS_PER_WORD, isize);
- return adjust_address_nv (x, mode, offset);
+ return adjust_address_nv (x, omode, offset);
}
/* If X is a comparison operator, rewrite it in a new mode. This
probably won't match, but may allow further simplifications. */
else if (COMPARISON_P (x))
- return gen_rtx_fmt_ee (GET_CODE (x), mode, XEXP (x, 0), XEXP (x, 1));
+ return gen_rtx_fmt_ee (GET_CODE (x), omode, XEXP (x, 0), XEXP (x, 1));
/* If we couldn't simplify X any other way, just enclose it in a
SUBREG. Normally, this SUBREG won't match, but some patterns may
{
int offset = 0;
rtx res;
- enum machine_mode sub_mode = GET_MODE (x);
- offset = subreg_lowpart_offset (mode, sub_mode);
- if (sub_mode == VOIDmode)
+ offset = subreg_lowpart_offset (omode, imode);
+ if (imode == VOIDmode)
{
- sub_mode = int_mode_for_mode (mode);
- x = gen_lowpart_common (sub_mode, x);
- if (x == 0)
- return gen_rtx_CLOBBER (VOIDmode, const0_rtx);
+ imode = int_mode_for_mode (omode);
+ x = gen_lowpart_common (imode, x);
+ if (x == NULL)
+ goto fail;
}
- res = simplify_gen_subreg (mode, x, sub_mode, offset);
+ res = simplify_gen_subreg (omode, x, imode, offset);
if (res)
return res;
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
- }
-}
-\f
-/* These routines make binary and unary operations by first seeing if they
- fold; if not, a new expression is allocated. */
-
-static rtx
-gen_binary (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1)
-{
- rtx result;
- rtx tem;
-
- if (GET_CODE (op0) == CLOBBER)
- return op0;
- else if (GET_CODE (op1) == CLOBBER)
- return op1;
-
- if (GET_RTX_CLASS (code) == RTX_COMM_ARITH
- && swap_commutative_operands_p (op0, op1))
- tem = op0, op0 = op1, op1 = tem;
-
- if (GET_RTX_CLASS (code) == RTX_COMPARE
- || GET_RTX_CLASS (code) == RTX_COMM_COMPARE)
- {
- enum machine_mode op_mode = GET_MODE (op0);
-
- /* Strip the COMPARE from (REL_OP (compare X Y) 0) to get
- just (REL_OP X Y). */
- if (GET_CODE (op0) == COMPARE && op1 == const0_rtx)
- {
- op1 = XEXP (op0, 1);
- op0 = XEXP (op0, 0);
- op_mode = GET_MODE (op0);
- }
-
- if (op_mode == VOIDmode)
- op_mode = GET_MODE (op1);
- result = simplify_relational_operation (code, mode, op_mode, op0, op1);
}
- else
- result = simplify_binary_operation (code, mode, op0, op1);
- if (result)
- return result;
-
- /* Put complex operands first and constants second. */
- if (GET_RTX_CLASS (code) == RTX_COMM_ARITH
- && swap_commutative_operands_p (op0, op1))
- return gen_rtx_fmt_ee (code, mode, op1, op0);
-
- /* If we are turning off bits already known off in OP0, we need not do
- an AND. */
- else if (code == AND && GET_CODE (op1) == CONST_INT
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && (nonzero_bits (op0, mode) & ~INTVAL (op1)) == 0)
- return op0;
-
- return gen_rtx_fmt_ee (code, mode, op0, op1);
+ fail:
+ return gen_rtx_CLOBBER (imode, const0_rtx);
}
\f
/* Simplify a comparison between *POP0 and *POP1 where CODE is the
break;
case GEU:
- /* >= C is equivalent to < (C - 1). */
+ /* >= C is equivalent to > (C - 1). */
if (const_op > 1)
{
const_op -= 1;
break;
case SIGN_EXTEND:
- /* Can simplify (compare (zero/sign_extend FOO) CONST)
- to (compare FOO CONST) if CONST fits in FOO's mode and we
- are either testing inequality or have an unsigned comparison
- with ZERO_EXTEND or a signed comparison with SIGN_EXTEND. */
- if (! unsigned_comparison_p
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0)))
- <= HOST_BITS_PER_WIDE_INT)
+ /* Can simplify (compare (zero/sign_extend FOO) CONST) to
+ (compare FOO CONST) if CONST fits in FOO's mode and we
+ are either testing inequality or have an unsigned
+ comparison with ZERO_EXTEND or a signed comparison with
+ SIGN_EXTEND. But don't do it if we don't have a compare
+ insn of the given mode, since we'd have to revert it
+ later on, and then we wouldn't know whether to sign- or
+ zero-extend. */
+ mode = GET_MODE (XEXP (op0, 0));
+ if (mode != VOIDmode && GET_MODE_CLASS (mode) == MODE_INT
+ && ! unsigned_comparison_p
+ && (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
&& ((unsigned HOST_WIDE_INT) const_op
- < (((unsigned HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0))) - 1)))))
+ < (((unsigned HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode) - 1))))
+ && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
{
op0 = XEXP (op0, 0);
continue;
break;
case SUBREG:
- /* Check for the case where we are comparing A - C1 with C2,
- both constants are smaller than 1/2 the maximum positive
- value in MODE, and the comparison is equality or unsigned.
- In that case, if A is either zero-extended to MODE or has
- sufficient sign bits so that the high-order bit in MODE
- is a copy of the sign in the inner mode, we can prove that it is
- safe to do the operation in the wider mode. This simplifies
- many range checks. */
+ /* Check for the case where we are comparing A - C1 with C2, that is
+
+ (subreg:MODE (plus (A) (-C1))) op (C2)
+
+ with C1 a constant, and try to lift the SUBREG, i.e. to do the
+ comparison in the wider mode. One of the following two conditions
+ must be true in order for this to be valid:
+
+ 1. The mode extension results in the same bit pattern being added
+ on both sides and the comparison is equality or unsigned. As
+ C2 has been truncated to fit in MODE, the pattern can only be
+ all 0s or all 1s.
+
+ 2. The mode extension results in the sign bit being copied on
+ each side.
+
+ The difficulty here is that we have predicates for A but not for
+ (A - C1) so we need to check that C1 is within proper bounds so
+ as to perturbate A as little as possible. */
if (mode_width <= HOST_BITS_PER_WIDE_INT
&& subreg_lowpart_p (op0)
+ && GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) > mode_width
&& GET_CODE (SUBREG_REG (op0)) == PLUS
- && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT
- && INTVAL (XEXP (SUBREG_REG (op0), 1)) < 0
- && (-INTVAL (XEXP (SUBREG_REG (op0), 1))
- < (HOST_WIDE_INT) (GET_MODE_MASK (mode) / 2))
- && (unsigned HOST_WIDE_INT) const_op < GET_MODE_MASK (mode) / 2
- && (0 == (nonzero_bits (XEXP (SUBREG_REG (op0), 0),
- GET_MODE (SUBREG_REG (op0)))
- & ~GET_MODE_MASK (mode))
- || (num_sign_bit_copies (XEXP (SUBREG_REG (op0), 0),
- GET_MODE (SUBREG_REG (op0)))
- > (unsigned int)
- (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0)))
- - GET_MODE_BITSIZE (mode)))))
- {
- op0 = SUBREG_REG (op0);
- continue;
+ && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT)
+ {
+ enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0));
+ rtx a = XEXP (SUBREG_REG (op0), 0);
+ HOST_WIDE_INT c1 = -INTVAL (XEXP (SUBREG_REG (op0), 1));
+
+ if ((c1 > 0
+ && (unsigned HOST_WIDE_INT) c1
+ < (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)
+ && (equality_comparison_p || unsigned_comparison_p)
+ /* (A - C1) zero-extends if it is positive and sign-extends
+ if it is negative, C2 both zero- and sign-extends. */
+ && ((0 == (nonzero_bits (a, inner_mode)
+ & ~GET_MODE_MASK (mode))
+ && const_op >= 0)
+ /* (A - C1) sign-extends if it is positive and 1-extends
+ if it is negative, C2 both sign- and 1-extends. */
+ || (num_sign_bit_copies (a, inner_mode)
+ > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ - mode_width)
+ && const_op < 0)))
+ || ((unsigned HOST_WIDE_INT) c1
+ < (unsigned HOST_WIDE_INT) 1 << (mode_width - 2)
+ /* (A - C1) always sign-extends, like C2. */
+ && num_sign_bit_copies (a, inner_mode)
+ > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ - mode_width - 1)))
+ {
+ op0 = SUBREG_REG (op0);
+ continue;
+ }
}
/* If the inner mode is narrower and we are extracting the low part,
/* ... fall through ... */
case ZERO_EXTEND:
- if ((unsigned_comparison_p || equality_comparison_p)
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0)))
- <= HOST_BITS_PER_WIDE_INT)
- && ((unsigned HOST_WIDE_INT) const_op
- < GET_MODE_MASK (GET_MODE (XEXP (op0, 0)))))
+ mode = GET_MODE (XEXP (op0, 0));
+ if (mode != VOIDmode && GET_MODE_CLASS (mode) == MODE_INT
+ && (unsigned_comparison_p || equality_comparison_p)
+ && (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+ && ((unsigned HOST_WIDE_INT) const_op < GET_MODE_MASK (mode))
+ && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
{
op0 = XEXP (op0, 0);
continue;
if (code == LT || code == NE)
new_code = GET_CODE (op0);
else
- new_code = combine_reversed_comparison_code (op0);
+ new_code = reversed_comparison_code (op0, NULL);
if (new_code != UNKNOWN)
{
&& c1 != mask
&& c1 != GET_MODE_MASK (tmode))
{
- op0 = gen_binary (AND, tmode,
- SUBREG_REG (XEXP (op0, 0)),
- gen_int_mode (c1, tmode));
+ op0 = simplify_gen_binary (AND, tmode,
+ SUBREG_REG (XEXP (op0, 0)),
+ gen_int_mode (c1, tmode));
op0 = gen_lowpart (mode, op0);
continue;
}
{
rtx inner = XEXP (XEXP (XEXP (op0, 0), 0), 0);
rtx add_const = XEXP (XEXP (op0, 0), 1);
- rtx new_const = gen_binary (ASHIFTRT, GET_MODE (op0), add_const,
- XEXP (op0, 1));
+ rtx new_const = simplify_gen_binary (ASHIFTRT, GET_MODE (op0),
+ add_const, XEXP (op0, 1));
- op0 = gen_binary (PLUS, tmode,
- gen_lowpart (tmode, inner),
- new_const);
+ op0 = simplify_gen_binary (PLUS, tmode,
+ gen_lowpart (tmode, inner),
+ new_const);
continue;
}
those bits.
3. SUBREG_REG (op0) is a memory and LOAD_EXTEND_OP is defined and not
- NIL. In that case we know those bits are zeros or ones. We must
+ UNKNOWN. In that case we know those bits are zeros or ones. We must
also be sure that they are the same as the upper bits of op1.
We can never remove a SUBREG for a non-equality comparison because
{
/* For paradoxical subregs, allow case 1 as above. Case 3 isn't
implemented. */
- if (GET_CODE (SUBREG_REG (op0)) == REG)
+ if (REG_P (SUBREG_REG (op0)))
{
op0 = SUBREG_REG (op0);
op1 = gen_lowpart (GET_MODE (op0), op1);
make a new AND in the proper mode. */
if (GET_CODE (op0) == AND
&& !have_insn_for (AND, mode))
- op0 = gen_binary (AND, tmode,
- gen_lowpart (tmode,
- XEXP (op0, 0)),
- gen_lowpart (tmode,
- XEXP (op0, 1)));
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode,
+ XEXP (op0, 0)),
+ gen_lowpart (tmode,
+ XEXP (op0, 1)));
op0 = gen_lowpart (tmode, op0);
if (zero_extended && GET_CODE (op1) == CONST_INT)
if (op1 == const0_rtx && (code == LT || code == GE)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
{
- op0 = gen_binary (AND, tmode,
- gen_lowpart (tmode, op0),
- GEN_INT ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (mode) - 1)));
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode, op0),
+ GEN_INT ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode)
+ - 1)));
code = (code == LT) ? NE : EQ;
break;
}
return code;
}
\f
-/* Like jump.c' reversed_comparison_code, but use combine infrastructure for
- searching backward. */
-static enum rtx_code
-combine_reversed_comparison_code (rtx exp)
+/* Utility function for record_value_for_reg. Count number of
+ rtxs in X. */
+static int
+count_rtxs (rtx x)
{
- enum rtx_code code1 = reversed_comparison_code (exp, NULL);
- rtx x;
-
- if (code1 != UNKNOWN
- || GET_MODE_CLASS (GET_MODE (XEXP (exp, 0))) != MODE_CC)
- return code1;
- /* Otherwise try and find where the condition codes were last set and
- use that. */
- x = get_last_value (XEXP (exp, 0));
- if (!x || GET_CODE (x) != COMPARE)
- return UNKNOWN;
- return reversed_comparison_code_parts (GET_CODE (exp),
- XEXP (x, 0), XEXP (x, 1), NULL);
-}
+ enum rtx_code code = GET_CODE (x);
+ const char *fmt;
+ int i, ret = 1;
-/* Return comparison with reversed code of EXP and operands OP0 and OP1.
- Return NULL_RTX in case we fail to do the reversal. */
-static rtx
-reversed_comparison (rtx exp, enum machine_mode mode, rtx op0, rtx op1)
-{
- enum rtx_code reversed_code = combine_reversed_comparison_code (exp);
- if (reversed_code == UNKNOWN)
- return NULL_RTX;
- else
- return gen_binary (reversed_code, mode, op0, op1);
+ if (GET_RTX_CLASS (code) == '2'
+ || GET_RTX_CLASS (code) == 'c')
+ {
+ rtx x0 = XEXP (x, 0);
+ rtx x1 = XEXP (x, 1);
+
+ if (x0 == x1)
+ return 1 + 2 * count_rtxs (x0);
+
+ if ((GET_RTX_CLASS (GET_CODE (x1)) == '2'
+ || GET_RTX_CLASS (GET_CODE (x1)) == 'c')
+ && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
+ return 2 + 2 * count_rtxs (x0)
+ + count_rtxs (x == XEXP (x1, 0)
+ ? XEXP (x1, 1) : XEXP (x1, 0));
+
+ if ((GET_RTX_CLASS (GET_CODE (x0)) == '2'
+ || GET_RTX_CLASS (GET_CODE (x0)) == 'c')
+ && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
+ return 2 + 2 * count_rtxs (x1)
+ + count_rtxs (x == XEXP (x0, 0)
+ ? XEXP (x0, 1) : XEXP (x0, 0));
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ ret += count_rtxs (XEXP (x, i));
+
+ return ret;
}
\f
/* Utility function for following routine. Called when X is part of a value
- being stored into reg_last_set_value. Sets reg_last_set_table_tick
+ being stored into last_set_value. Sets last_set_table_tick
for each register mentioned. Similar to mention_regs in cse.c */
static void
unsigned int r;
for (r = regno; r < endregno; r++)
- reg_last_set_table_tick[r] = label_tick;
+ reg_stat[r].last_set_table_tick = label_tick;
return;
}
/* Record that REG is set to VALUE in insn INSN. If VALUE is zero, we
are saying that the register is clobbered and we no longer know its
- value. If INSN is zero, don't update reg_last_set; this is only permitted
- with VALUE also zero and is used to invalidate the register. */
+ value. If INSN is zero, don't update reg_stat[].last_set; this is
+ only permitted with VALUE also zero and is used to invalidate the
+ register. */
static void
record_value_for_reg (rtx reg, rtx insn, rtx value)
&& GET_CODE (XEXP (tem, 0)) == CLOBBER
&& GET_CODE (XEXP (tem, 1)) == CLOBBER)
tem = XEXP (tem, 0);
+ else if (count_occurrences (value, reg, 1) >= 2)
+ {
+ /* If there are two or more occurrences of REG in VALUE,
+ prevent the value from growing too much. */
+ if (count_rtxs (tem) > MAX_LAST_VALUE_RTL)
+ tem = gen_rtx_CLOBBER (GET_MODE (tem), const0_rtx);
+ }
value = replace_rtx (copy_rtx (value), reg, tem);
}
for (i = regno; i < endregno; i++)
{
if (insn)
- reg_last_set[i] = insn;
+ reg_stat[i].last_set = insn;
- reg_last_set_value[i] = 0;
- reg_last_set_mode[i] = 0;
- reg_last_set_nonzero_bits[i] = 0;
- reg_last_set_sign_bit_copies[i] = 0;
- reg_last_death[i] = 0;
+ reg_stat[i].last_set_value = 0;
+ reg_stat[i].last_set_mode = 0;
+ reg_stat[i].last_set_nonzero_bits = 0;
+ reg_stat[i].last_set_sign_bit_copies = 0;
+ reg_stat[i].last_death = 0;
}
/* Mark registers that are being referenced in this value. */
for (i = regno; i < endregno; i++)
{
- reg_last_set_label[i] = label_tick;
- if (value && reg_last_set_table_tick[i] == label_tick)
- reg_last_set_invalid[i] = 1;
+ reg_stat[i].last_set_label = label_tick;
+ if (value && reg_stat[i].last_set_table_tick == label_tick)
+ reg_stat[i].last_set_invalid = 1;
else
- reg_last_set_invalid[i] = 0;
+ reg_stat[i].last_set_invalid = 0;
}
/* The value being assigned might refer to X (like in "x++;"). In that
case, we must replace it with (clobber (const_int 0)) to prevent
infinite loops. */
if (value && ! get_last_value_validate (&value, insn,
- reg_last_set_label[regno], 0))
+ reg_stat[regno].last_set_label, 0))
{
value = copy_rtx (value);
if (! get_last_value_validate (&value, insn,
- reg_last_set_label[regno], 1))
+ reg_stat[regno].last_set_label, 1))
value = 0;
}
/* For the main register being modified, update the value, the mode, the
nonzero bits, and the number of sign bit copies. */
- reg_last_set_value[regno] = value;
+ reg_stat[regno].last_set_value = value;
if (value)
{
enum machine_mode mode = GET_MODE (reg);
subst_low_cuid = INSN_CUID (insn);
- reg_last_set_mode[regno] = mode;
+ reg_stat[regno].last_set_mode = mode;
if (GET_MODE_CLASS (mode) == MODE_INT
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
mode = nonzero_bits_mode;
- reg_last_set_nonzero_bits[regno] = nonzero_bits (value, mode);
- reg_last_set_sign_bit_copies[regno]
+ reg_stat[regno].last_set_nonzero_bits = nonzero_bits (value, mode);
+ reg_stat[regno].last_set_sign_bit_copies
= num_sign_bit_copies (value, GET_MODE (reg));
}
}
if (GET_CODE (dest) == SUBREG)
dest = SUBREG_REG (dest);
- if (GET_CODE (dest) == REG)
+ if (REG_P (dest))
{
/* If we are setting the whole register, we know its value. Otherwise
show that we don't know the value. We can handle SUBREG in
else
record_value_for_reg (dest, record_dead_insn, NULL_RTX);
}
- else if (GET_CODE (dest) == MEM
+ else if (MEM_P (dest)
/* Ignore pushes, they clobber nothing. */
&& ! push_operand (dest, GET_MODE (dest)))
mem_last_set = INSN_CUID (record_dead_insn);
for the things done by INSN. This is the last thing done in processing
INSN in the combiner loop.
- We update reg_last_set, reg_last_set_value, reg_last_set_mode,
- reg_last_set_nonzero_bits, reg_last_set_sign_bit_copies, reg_last_death,
- and also the similar information mem_last_set (which insn most recently
- modified memory) and last_call_cuid (which insn was the most recent
- subroutine call). */
+ We update reg_stat[], in particular fields last_set, last_set_value,
+ last_set_mode, last_set_nonzero_bits, last_set_sign_bit_copies,
+ last_death, and also the similar information mem_last_set (which insn
+ most recently modified memory) and last_call_cuid (which insn was the
+ most recent subroutine call). */
static void
record_dead_and_set_regs (rtx insn)
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
{
if (REG_NOTE_KIND (link) == REG_DEAD
- && GET_CODE (XEXP (link, 0)) == REG)
+ && REG_P (XEXP (link, 0)))
{
unsigned int regno = REGNO (XEXP (link, 0));
unsigned int endregno
: 1);
for (i = regno; i < endregno; i++)
- reg_last_death[i] = insn;
+ reg_stat[i].last_death = insn;
}
else if (REG_NOTE_KIND (link) == REG_INC)
record_value_for_reg (XEXP (link, 0), insn, NULL_RTX);
}
- if (GET_CODE (insn) == CALL_INSN)
+ if (CALL_P (insn))
{
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
{
- reg_last_set_value[i] = 0;
- reg_last_set_mode[i] = 0;
- reg_last_set_nonzero_bits[i] = 0;
- reg_last_set_sign_bit_copies[i] = 0;
- reg_last_death[i] = 0;
+ reg_stat[i].last_set_value = 0;
+ reg_stat[i].last_set_mode = 0;
+ reg_stat[i].last_set_nonzero_bits = 0;
+ reg_stat[i].last_set_sign_bit_copies = 0;
+ reg_stat[i].last_death = 0;
}
last_call_cuid = mem_last_set = INSN_CUID (insn);
insn = XEXP (links, 0);
set = single_set (insn);
- if (! set || GET_CODE (SET_DEST (set)) != REG
+ if (! set || !REG_P (SET_DEST (set))
|| REGNO (SET_DEST (set)) != regno
|| GET_MODE (SET_DEST (set)) != GET_MODE (SUBREG_REG (subreg)))
{
continue;
}
- if (reg_last_set[regno] == insn)
+ if (reg_stat[regno].last_set == insn)
{
if (SUBREG_PROMOTED_UNSIGNED_P (subreg) > 0)
- reg_last_set_nonzero_bits[regno] &= GET_MODE_MASK (mode);
+ reg_stat[regno].last_set_nonzero_bits &= GET_MODE_MASK (mode);
}
- if (GET_CODE (SET_SRC (set)) == REG)
+ if (REG_P (SET_SRC (set)))
{
regno = REGNO (SET_SRC (set));
links = LOG_LINKS (insn);
check_promoted_subreg (rtx insn, rtx x)
{
if (GET_CODE (x) == SUBREG && SUBREG_PROMOTED_VAR_P (x)
- && GET_CODE (SUBREG_REG (x)) == REG)
+ && REG_P (SUBREG_REG (x)))
record_promoted_value (insn, x);
else
{
int len = GET_RTX_LENGTH (GET_CODE (x));
int i;
- if (GET_CODE (x) == REG)
+ if (REG_P (x))
{
unsigned int regno = REGNO (x);
unsigned int endregno
unsigned int j;
for (j = regno; j < endregno; j++)
- if (reg_last_set_invalid[j]
+ if (reg_stat[j].last_set_invalid
/* If this is a pseudo-register that was only set once and not
live at the beginning of the function, it is always valid. */
|| (! (regno >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (regno) == 1
&& (! REGNO_REG_SET_P
(ENTRY_BLOCK_PTR->next_bb->global_live_at_start, regno)))
- && reg_last_set_label[j] > tick))
+ && reg_stat[j].last_set_label > tick))
{
if (replace)
*loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
/* If this is a memory reference, make sure that there were
no stores after it that might have clobbered the value. We don't
have alias info, so we assume any store invalidates it. */
- else if (GET_CODE (x) == MEM && ! RTX_UNCHANGING_P (x)
+ else if (MEM_P (x) && !MEM_READONLY_P (x)
&& INSN_CUID (insn) <= mem_last_set)
{
if (replace)
&& (value = get_last_value (SUBREG_REG (x))) != 0)
return gen_lowpart (GET_MODE (x), value);
- if (GET_CODE (x) != REG)
+ if (!REG_P (x))
return 0;
regno = REGNO (x);
- value = reg_last_set_value[regno];
+ value = reg_stat[regno].last_set_value;
/* If we don't have a value, or if it isn't for this basic block and
it's either a hard register, set more than once, or it's a live
block. */
if (value == 0
- || (reg_last_set_label[regno] != label_tick
+ || (reg_stat[regno].last_set_label != label_tick
&& (regno < FIRST_PSEUDO_REGISTER
|| REG_N_SETS (regno) != 1
|| (REGNO_REG_SET_P
/* If the value was set in a later insn than the ones we are processing,
we can't use it even if the register was only set once. */
- if (INSN_CUID (reg_last_set[regno]) >= subst_low_cuid)
+ if (INSN_CUID (reg_stat[regno].last_set) >= subst_low_cuid)
return 0;
/* If the value has all its registers valid, return it. */
- if (get_last_value_validate (&value, reg_last_set[regno],
- reg_last_set_label[regno], 0))
+ if (get_last_value_validate (&value, reg_stat[regno].last_set,
+ reg_stat[regno].last_set_label, 0))
return value;
/* Otherwise, make a copy and replace any invalid register with
(clobber (const_int 0)). If that fails for some reason, return 0. */
value = copy_rtx (value);
- if (get_last_value_validate (&value, reg_last_set[regno],
- reg_last_set_label[regno], 1))
+ if (get_last_value_validate (&value, reg_stat[regno].last_set,
+ reg_stat[regno].last_set_label, 1))
return value;
return 0;
return 1;
#endif
for (; regno < endreg; regno++)
- if (reg_last_set[regno]
- && INSN_CUID (reg_last_set[regno]) > from_cuid)
+ if (reg_stat[regno].last_set
+ && INSN_CUID (reg_stat[regno].last_set) > from_cuid)
return 1;
return 0;
}
{
unsigned int regno, endregno;
- if (GET_CODE (dest) != REG)
+ if (!REG_P (dest))
return;
regno = REGNO (dest);
reg_dead_flag = 0;
- /* Check that reg isn't mentioned in NEWPAT_USED_REGS. */
+ /* Check that reg isn't mentioned in NEWPAT_USED_REGS. For fixed registers
+ we allow the machine description to decide whether use-and-clobber
+ patterns are OK. */
if (reg_dead_regno < FIRST_PSEUDO_REGISTER)
{
for (i = reg_dead_regno; i < reg_dead_endregno; i++)
- if (TEST_HARD_REG_BIT (newpat_used_regs, i))
+ if (!fixed_regs[i] && TEST_HARD_REG_BIT (newpat_used_regs, i))
return 0;
}
/* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, label, or
beginning of function. */
- for (; insn && GET_CODE (insn) != CODE_LABEL && GET_CODE (insn) != BARRIER;
+ for (; insn && !LABEL_P (insn) && !BARRIER_P (insn);
insn = prev_nonnote_insn (insn))
{
note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
case CLOBBER:
/* If we are clobbering a MEM, mark any hard registers inside the
address as used. */
- if (GET_CODE (XEXP (x, 0)) == MEM)
+ if (MEM_P (XEXP (x, 0)))
mark_used_regs_combine (XEXP (XEXP (x, 0), 0));
return;
while (GET_CODE (testreg) == SUBREG
|| GET_CODE (testreg) == ZERO_EXTRACT
- || GET_CODE (testreg) == SIGN_EXTRACT
|| GET_CODE (testreg) == STRICT_LOW_PART)
testreg = XEXP (testreg, 0);
- if (GET_CODE (testreg) == MEM)
+ if (MEM_P (testreg))
mark_used_regs_combine (XEXP (testreg, 0));
mark_used_regs_combine (SET_SRC (x));
if (code == REG)
{
unsigned int regno = REGNO (x);
- rtx where_dead = reg_last_death[regno];
+ rtx where_dead = reg_stat[regno].last_death;
rtx before_dead, after_dead;
/* Don't move the register if it gets killed in between from and to. */
rtx note = remove_death (regno, where_dead);
/* It is possible for the call above to return 0. This can occur
- when reg_last_death points to I2 or I1 that we combined with.
+ when last_death points to I2 or I1 that we combined with.
In that case make a new note.
We must also check for the case where X is a hard register
For a REG (the only other possibility), the entire value is
being replaced so the old value is not used in this insn. */
- if (GET_CODE (dest) == MEM)
+ if (MEM_P (dest))
move_deaths (XEXP (dest, 0), maybe_kill_insn, from_cuid,
to_insn, pnotes);
return;
if (GET_CODE (target) == SUBREG)
target = SUBREG_REG (target);
- if (GET_CODE (target) != REG)
+ if (!REG_P (target))
return 0;
tregno = REGNO (target), regno = REGNO (x);
/* If this NOTE references a pseudo register, ensure it references
the latest copy of that register. */
- if (XEXP (note, 0) && GET_CODE (XEXP (note, 0)) == REG
+ if (XEXP (note, 0) && REG_P (XEXP (note, 0))
&& REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER)
XEXP (note, 0) = regno_reg_rtx[REGNO (XEXP (note, 0))];
/* Just get rid of this note, as it is unused later anyway. */
break;
- case REG_VTABLE_REF:
- /* ??? Should remain with *a particular* memory load. Given the
- nature of vtable data, the last insn seems relatively safe. */
- place = i3;
- break;
-
case REG_NON_LOCAL_GOTO:
- if (GET_CODE (i3) == JUMP_INSN)
+ if (JUMP_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == JUMP_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && JUMP_P (i2));
+ place = i2;
+ }
break;
case REG_EH_REGION:
/* These notes must remain with the call or trapping instruction. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
+ else if (i2 && CALL_P (i2))
place = i2;
- else if (flag_non_call_exceptions)
+ else
{
+ gcc_assert (flag_non_call_exceptions);
if (may_trap_p (i3))
place = i3;
else if (i2 && may_trap_p (i2))
can now prove that the instructions can't trap. Drop the
note in this case. */
}
- else
- abort ();
break;
- case REG_ALWAYS_RETURN:
case REG_NORETURN:
case REG_SETJMP:
/* These notes must remain with the call. It should not be
possible for both I2 and I3 to be a call. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && CALL_P (i2));
+ place = i2;
+ }
break;
case REG_UNUSED:
if (from_insn != i3)
break;
- if (! (GET_CODE (XEXP (note, 0)) == REG
+ if (! (REG_P (XEXP (note, 0))
? find_regno_note (i3, REG_UNUSED, REGNO (XEXP (note, 0)))
: find_reg_note (i3, REG_UNUSED, XEXP (note, 0))))
place = i3;
now dies here, so we must put a REG_DEAD note here unless there
is one already. */
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3))
- && ! (GET_CODE (XEXP (note, 0)) == REG
+ && ! (REG_P (XEXP (note, 0))
? find_regno_note (i3, REG_DEAD,
REGNO (XEXP (note, 0)))
: find_reg_note (i3, REG_DEAD, XEXP (note, 0))))
place = i2;
}
- /* Don't attach REG_LABEL note to a JUMP_INSN which has
- JUMP_LABEL already. Instead, decrement LABEL_NUSES. */
- if (place && GET_CODE (place) == JUMP_INSN && JUMP_LABEL (place))
+ /* Don't attach REG_LABEL note to a JUMP_INSN. Add
+ a JUMP_LABEL instead or decrement LABEL_NUSES. */
+ if (place && JUMP_P (place))
{
- if (JUMP_LABEL (place) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place))--;
+ rtx label = JUMP_LABEL (place);
+
+ if (!label)
+ JUMP_LABEL (place) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place = 0;
}
- if (place2 && GET_CODE (place2) == JUMP_INSN && JUMP_LABEL (place2))
+ if (place2 && JUMP_P (place2))
{
- if (JUMP_LABEL (place2) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place2)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place2))--;
+ rtx label = JUMP_LABEL (place2);
+
+ if (!label)
+ JUMP_LABEL (place2) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place2 = 0;
}
break;
/* If the insn previously containing this note still exists,
put it back where it was. Otherwise move it to the previous
insn. Adjust the corresponding REG_LIBCALL note. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
libcall sequence, don't add the notes. */
else if (XEXP (note, 0) == from_insn)
tem = place = 0;
+ /* Don't add the dangling REG_RETVAL note. */
+ else if (! tem)
+ place = 0;
}
break;
case REG_LIBCALL:
/* This is handled similarly to REG_RETVAL. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
libcall sequence, don't add the notes. */
else if (XEXP (note, 0) == from_insn)
tem = place = 0;
+ /* Don't add the dangling REG_LIBCALL note. */
+ else if (! tem)
+ place = 0;
}
break;
use of A and put the death note there. */
if (from_insn
- && GET_CODE (from_insn) == CALL_INSN
+ && CALL_P (from_insn)
&& find_reg_fusage (from_insn, USE, XEXP (note, 0)))
place = from_insn;
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
/* If the register is being set at TEM, see if that is all
TEM is doing. If so, delete TEM. Otherwise, make this
- into a REG_UNUSED note instead. */
- if (reg_set_p (XEXP (note, 0), PATTERN (tem)))
+ into a REG_UNUSED note instead. Don't delete sets to
+ global register vars. */
+ if ((REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER
+ || !global_regs[REGNO (XEXP (note, 0))])
+ && reg_set_p (XEXP (note, 0), PATTERN (tem)))
{
rtx set = single_set (tem);
rtx inner_dest = 0;
distribute_notes (old_notes, tem, tem, NULL_RTX);
distribute_links (LOG_LINKS (tem));
- PUT_CODE (tem, NOTE);
- NOTE_LINE_NUMBER (tem) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (tem) = 0;
+ SET_INSN_DELETED (tem);
#ifdef HAVE_cc0
/* Delete the setter too. */
cc0_setter, NULL_RTX);
distribute_links (LOG_LINKS (cc0_setter));
- PUT_CODE (cc0_setter, NOTE);
- NOTE_LINE_NUMBER (cc0_setter)
- = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (cc0_setter) = 0;
+ SET_INSN_DELETED (cc0_setter);
}
#endif
}
}
}
else if (reg_referenced_p (XEXP (note, 0), PATTERN (tem))
- || (GET_CODE (tem) == CALL_INSN
+ || (CALL_P (tem)
&& find_reg_fusage (tem, USE, XEXP (note, 0))))
{
place = tem;
/* If the register is set or already dead at PLACE, we needn't do
anything with this note if it is still a REG_DEAD note.
- We can here if it is set at all, not if is it totally replace,
+ We check here if it is set at all, not if is it totally replaced,
which is what `dead_or_set_p' checks, so also check for it being
set partially. */
|| reg_bitfield_target_p (XEXP (note, 0), PATTERN (place)))
{
/* Unless the register previously died in PLACE, clear
- reg_last_death. [I no longer understand why this is
+ last_death. [I no longer understand why this is
being done.] */
- if (reg_last_death[regno] != place)
- reg_last_death[regno] = 0;
+ if (reg_stat[regno].last_death != place)
+ reg_stat[regno].last_death = 0;
place = 0;
}
else
- reg_last_death[regno] = place;
+ reg_stat[regno].last_death = place;
/* If this is a death note for a hard reg that is occupying
multiple registers, ensure that we are still using all
default:
/* Any other notes should not be present at this point in the
compilation. */
- abort ();
+ gcc_unreachable ();
}
if (place)
}
else if ((REG_NOTE_KIND (note) == REG_DEAD
|| REG_NOTE_KIND (note) == REG_UNUSED)
- && GET_CODE (XEXP (note, 0)) == REG)
+ && REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))--;
if (place2)
{
if ((REG_NOTE_KIND (note) == REG_DEAD
|| REG_NOTE_KIND (note) == REG_UNUSED)
- && GET_CODE (XEXP (note, 0)) == REG)
+ && REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))++;
REG_NOTES (place2) = gen_rtx_fmt_ee (GET_CODE (note),
replace I3, I2, and I1 by I3 and I2. But in that case the
destination of I2 also remains unchanged. */
- if (GET_CODE (XEXP (link, 0)) == NOTE
+ if (NOTE_P (XEXP (link, 0))
|| (set = single_set (XEXP (link, 0))) == 0)
continue;
reg = SET_DEST (set);
while (GET_CODE (reg) == SUBREG || GET_CODE (reg) == ZERO_EXTRACT
- || GET_CODE (reg) == SIGN_EXTRACT
|| GET_CODE (reg) == STRICT_LOW_PART)
reg = XEXP (reg, 0);
place = insn;
break;
}
- else if (GET_CODE (insn) == CALL_INSN
+ else if (CALL_P (insn)
&& find_reg_fusage (insn, USE, reg))
{
place = insn;
}
}
\f
+/* Subroutine of unmentioned_reg_p and callback from for_each_rtx.
+ Check whether the expression pointer to by LOC is a register or
+ memory, and if so return 1 if it isn't mentioned in the rtx EXPR.
+ Otherwise return zero. */
+
+static int
+unmentioned_reg_p_1 (rtx *loc, void *expr)
+{
+ rtx x = *loc;
+
+ if (x != NULL_RTX
+ && (REG_P (x) || MEM_P (x))
+ && ! reg_mentioned_p (x, (rtx) expr))
+ return 1;
+ return 0;
+}
+
+/* Check for any register or memory mentioned in EQUIV that is not
+ mentioned in EXPR. This is used to restrict EQUIV to "specializations"
+ of EXPR where some registers may have been replaced by constants. */
+
+static bool
+unmentioned_reg_p (rtx equiv, rtx expr)
+{
+ return for_each_rtx (&equiv, unmentioned_reg_p_1, expr);
+}
+\f
/* Compute INSN_CUID for INSN, which is an insn made by combine. */
static int
insn_cuid (rtx insn)
{
while (insn != 0 && INSN_UID (insn) > max_uid_cuid
- && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == USE)
+ && NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) == USE)
insn = NEXT_INSN (insn);
- if (INSN_UID (insn) > max_uid_cuid)
- abort ();
+ gcc_assert (INSN_UID (insn) <= max_uid_cuid);
return INSN_CUID (insn);
}
OSDN Git Service
