/* Convert function calls to rtl insns, for GNU C compiler.
Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- 1999, 2000 Free Software Foundation, Inc.
+ 1999, 2000, 2001 Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+02111-1307, USA. */
#include "config.h"
#include "system.h"
#include "tree.h"
#include "flags.h"
#include "expr.h"
+#include "libfuncs.h"
#include "function.h"
#include "regs.h"
-#include "insn-flags.h"
#include "toplev.h"
#include "output.h"
#include "tm_p.h"
#include "timevar.h"
#include "sbitmap.h"
-#ifndef ACCUMULATE_OUTGOING_ARGS
-#define ACCUMULATE_OUTGOING_ARGS 0
-#endif
-
-/* Supply a default definition for PUSH_ARGS. */
-#ifndef PUSH_ARGS
-#ifdef PUSH_ROUNDING
-#define PUSH_ARGS !ACCUMULATE_OUTGOING_ARGS
-#else
-#define PUSH_ARGS 0
-#endif
-#endif
-
#if !defined FUNCTION_OK_FOR_SIBCALL
#define FUNCTION_OK_FOR_SIBCALL(DECL) 1
#endif
-#if !defined PREFERRED_STACK_BOUNDARY && defined STACK_BOUNDARY
-#define PREFERRED_STACK_BOUNDARY STACK_BOUNDARY
-#endif
-
/* Decide whether a function's arguments should be processed
from first to last or from last to first.
#define PUSH_ARGS_REVERSED 0
#endif
+#ifndef STACK_POINTER_OFFSET
+#define STACK_POINTER_OFFSET 0
+#endif
+
/* Like PREFERRED_STACK_BOUNDARY but in units of bytes, not bits. */
#define STACK_BYTES (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT)
static int calls_function PARAMS ((tree, int));
static int calls_function_1 PARAMS ((tree, int));
-/* Nonzero if this is a call to a `const' function. */
+/* Nonzero if this is a call to a `const' function. */
#define ECF_CONST 1
/* Nonzero if this is a call to a `volatile' function. */
#define ECF_NORETURN 2
-/* Nonzero if this is a call to malloc or a related function. */
+/* Nonzero if this is a call to malloc or a related function. */
#define ECF_MALLOC 4
/* Nonzero if it is plausible that this is a call to alloca. */
#define ECF_MAY_BE_ALLOCA 8
/* Nonzero if this is a call to a function that returns with the stack
pointer depressed. */
#define ECF_SP_DEPRESSED 1024
+/* Nonzero if this call is known to always return. */
+#define ECF_ALWAYS_RETURN 2048
+/* Create libcall block around the call. */
+#define ECF_LIBCALL_BLOCK 4096
static void emit_call_1 PARAMS ((rtx, tree, tree, HOST_WIDE_INT,
HOST_WIDE_INT, HOST_WIDE_INT, rtx,
struct args_size *));
static void precompute_arguments PARAMS ((int, int,
struct arg_data *));
-static int compute_argument_block_size PARAMS ((int,
+static int compute_argument_block_size PARAMS ((int,
struct args_size *,
int));
static void initialize_argument_information PARAMS ((int,
static rtx rtx_for_function_call PARAMS ((tree, tree));
static void load_register_parameters PARAMS ((struct arg_data *,
int, rtx *, int));
-static int libfunc_nothrow PARAMS ((rtx));
-static rtx emit_library_call_value_1 PARAMS ((int, rtx, rtx, int,
+static rtx emit_library_call_value_1 PARAMS ((int, rtx, rtx,
+ enum libcall_type,
enum machine_mode,
int, va_list));
static int special_function_p PARAMS ((tree, int));
tree exp;
int which;
{
- register int i;
+ int i;
enum tree_code code = TREE_CODE (exp);
int class = TREE_CODE_CLASS (code);
int length = first_rtl_op (code);
break;
+ case CONSTRUCTOR:
+ {
+ tree tem;
+
+ for (tem = CONSTRUCTOR_ELTS (exp); tem != 0; tem = TREE_CHAIN (tem))
+ if (calls_function_1 (TREE_VALUE (tem), which))
+ return 1;
+ }
+
+ return 0;
+
case SAVE_EXPR:
if (SAVE_EXPR_RTL (exp) != 0)
return 0;
case BLOCK:
{
- register tree local;
- register tree subblock;
+ tree local;
+ tree subblock;
for (local = BLOCK_VARS (exp); local; local = TREE_CHAIN (local))
if (DECL_INITIAL (local) != 0
CALL_INSN_FUNCTION_USAGE information. */
rtx
-prepare_call_address (funexp, fndecl, call_fusage, reg_parm_seen)
+prepare_call_address (funexp, fndecl, call_fusage, reg_parm_seen, sibcallp)
rtx funexp;
tree fndecl;
rtx *call_fusage;
int reg_parm_seen;
+ int sibcallp;
{
rtx static_chain_value = 0;
funexp = ((SMALL_REGISTER_CLASSES && reg_parm_seen)
? force_not_mem (memory_address (FUNCTION_MODE, funexp))
: memory_address (FUNCTION_MODE, funexp));
- else
+ else if (! sibcallp)
{
#ifndef NO_FUNCTION_CSE
if (optimize && ! flag_no_function_cse)
We restore `inhibit_defer_pop' to that value.
CALL_FUSAGE is either empty or an EXPR_LIST of USE expressions that
- denote registers used by the called function. */
-
+ denote registers used by the called function. */
+
static void
emit_call_1 (funexp, fndecl, funtype, stack_size, rounded_stack_size,
struct_value_size, next_arg_reg, valreg, old_inhibit_defer_pop,
HOST_WIDE_INT stack_size ATTRIBUTE_UNUSED;
HOST_WIDE_INT rounded_stack_size;
HOST_WIDE_INT struct_value_size ATTRIBUTE_UNUSED;
- rtx next_arg_reg;
+ rtx next_arg_reg ATTRIBUTE_UNUSED;
rtx valreg;
int old_inhibit_defer_pop;
rtx call_fusage;
#if defined (HAVE_sibcall_pop) && defined (HAVE_sibcall_value_pop)
if ((ecf_flags & ECF_SIBCALL)
&& HAVE_sibcall_pop && HAVE_sibcall_value_pop
- && (RETURN_POPS_ARGS (fndecl, funtype, stack_size) > 0
- || stack_size == 0))
+ && (n_popped > 0 || stack_size == 0))
{
- rtx n_pop = GEN_INT (RETURN_POPS_ARGS (fndecl, funtype, stack_size));
+ rtx n_pop = GEN_INT (n_popped);
rtx pat;
/* If this subroutine pops its own args, record that in the call insn
#endif
#if defined (HAVE_call_pop) && defined (HAVE_call_value_pop)
-/* If the target has "call" or "call_value" insns, then prefer them
- if no arguments are actually popped. If the target does not have
- "call" or "call_value" insns, then we must use the popping versions
- even if the call has no arguments to pop. */
+ /* If the target has "call" or "call_value" insns, then prefer them
+ if no arguments are actually popped. If the target does not have
+ "call" or "call_value" insns, then we must use the popping versions
+ even if the call has no arguments to pop. */
#if defined (HAVE_call) && defined (HAVE_call_value)
if (HAVE_call && HAVE_call_value && HAVE_call_pop && HAVE_call_value_pop
&& n_popped > 0 && ! (ecf_flags & ECF_SP_DEPRESSED))
/* Mark memory as used for "pure" function call. */
if (ecf_flags & ECF_PURE)
- {
- call_fusage = gen_rtx_EXPR_LIST (VOIDmode,
- gen_rtx_USE (VOIDmode,
- gen_rtx_MEM (BLKmode,
- gen_rtx_SCRATCH (VOIDmode))), call_fusage);
- }
+ call_fusage
+ = gen_rtx_EXPR_LIST
+ (VOIDmode,
+ gen_rtx_USE (VOIDmode,
+ gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (VOIDmode))),
+ call_fusage);
/* Put the register usage information on the CALL. If there is already
some usage information, put ours at the end. */
/* If this is a const call, then set the insn's unchanging bit. */
if (ecf_flags & (ECF_CONST | ECF_PURE))
- CONST_CALL_P (call_insn) = 1;
+ CONST_OR_PURE_CALL_P (call_insn) = 1;
/* If this call can't throw, attach a REG_EH_REGION reg note to that
effect. */
REG_NOTES (call_insn) = gen_rtx_EXPR_LIST (REG_EH_REGION, const0_rtx,
REG_NOTES (call_insn));
+ if (ecf_flags & ECF_NORETURN)
+ REG_NOTES (call_insn) = gen_rtx_EXPR_LIST (REG_NORETURN, const0_rtx,
+ REG_NOTES (call_insn));
+ if (ecf_flags & ECF_ALWAYS_RETURN)
+ REG_NOTES (call_insn) = gen_rtx_EXPR_LIST (REG_ALWAYS_RETURN, const0_rtx,
+ REG_NOTES (call_insn));
+
+ if (ecf_flags & ECF_RETURNS_TWICE)
+ {
+ REG_NOTES (call_insn) = gen_rtx_EXPR_LIST (REG_SETJMP, const0_rtx,
+ REG_NOTES (call_insn));
+ current_function_calls_setjmp = 1;
+ }
+
SIBLING_CALL_P (call_insn) = ((ecf_flags & ECF_SIBCALL) != 0);
/* Restore this now, so that we do defer pops for this call's args
If returning from the subroutine does pop the args, indicate that the
stack pointer will be changed. */
- if (rounded_stack_size != 0 && ! (ecf_flags & ECF_SP_DEPRESSED))
+ if (rounded_stack_size != 0)
{
- if (flag_defer_pop && inhibit_defer_pop == 0
+ if (ecf_flags & ECF_SP_DEPRESSED)
+ /* Just pretend we did the pop. */
+ stack_pointer_delta -= rounded_stack_size;
+ else if (flag_defer_pop && inhibit_defer_pop == 0
&& ! (ecf_flags & (ECF_CONST | ECF_PURE)))
pending_stack_adjust += rounded_stack_size;
else
??? We may optimize similar to defer_pop above, but it is
probably not worthwhile.
-
+
??? It will be worthwhile to enable combine_stack_adjustments even for
such machines. */
else if (n_popped)
think they are. */
&& DECL_CONTEXT (fndecl) == NULL_TREE && TREE_PUBLIC (fndecl))
{
- char *name = IDENTIFIER_POINTER (DECL_NAME (fndecl));
- char *tname = name;
+ const char *name = IDENTIFIER_POINTER (DECL_NAME (fndecl));
+ const char *tname = name;
/* We assume that alloca will always be called by name. It
makes no sense to pass it as a pointer-to-function to
it may return the same address across multiple calls.
C++ operator new is not suitable because it is not required
to return a unique pointer; indeed, the standard placement new
- just returns its argument. */
+ just returns its argument. */
else if (TYPE_MODE (TREE_TYPE (TREE_TYPE (fndecl))) == Pmode
&& (! strcmp (tname, "malloc")
|| ! strcmp (tname, "calloc")
return special_function_p (fndecl, 0) & ECF_RETURNS_TWICE;
}
-/* Detect flags (function attributes) from the function type node. */
+/* Detect flags (function attributes) from the function decl or type node. */
static int
flags_from_decl_or_type (exp)
tree exp;
{
int flags = 0;
-
+ tree type = exp;
/* ??? We can't set IS_MALLOC for function types? */
if (DECL_P (exp))
{
+ type = TREE_TYPE (exp);
+
/* The function exp may have the `malloc' attribute. */
if (DECL_P (exp) && DECL_IS_MALLOC (exp))
flags |= ECF_MALLOC;
/* The function exp may have the `pure' attribute. */
if (DECL_P (exp) && DECL_IS_PURE (exp))
- flags |= ECF_PURE;
+ flags |= ECF_PURE | ECF_LIBCALL_BLOCK;
if (TREE_NOTHROW (exp))
flags |= ECF_NOTHROW;
}
if (TREE_READONLY (exp) && ! TREE_THIS_VOLATILE (exp))
- flags |= ECF_CONST;
+ flags |= ECF_CONST | ECF_LIBCALL_BLOCK;
if (TREE_THIS_VOLATILE (exp))
flags |= ECF_NORETURN;
+ /* Mark if the function returns with the stack pointer depressed. We
+ cannot consider it pure or constant in that case. */
+ if (TREE_CODE (type) == FUNCTION_TYPE && TYPE_RETURNS_STACK_DEPRESSED (type))
+ {
+ flags |= ECF_SP_DEPRESSED;
+ flags &= ~(ECF_PURE | ECF_CONST | ECF_LIBCALL_BLOCK);
+ }
+
return flags;
}
-
/* Precompute all register parameters as described by ARGS, storing values
into fields within the ARGS array.
TYPE_MODE (TREE_TYPE (args[i].tree_value)),
args[i].value, args[i].unsignedp);
- /* If the value is expensive, and we are inside an appropriately
+ /* If the value is expensive, and we are inside an appropriately
short loop, put the value into a pseudo and then put the pseudo
into the hard reg.
|| (GET_CODE (args[i].value) == SUBREG
&& GET_CODE (SUBREG_REG (args[i].value)) == REG)))
&& args[i].mode != BLKmode
- && rtx_cost (args[i].value, SET) > 2
+ && rtx_cost (args[i].value, SET) > COSTS_N_INSNS (1)
&& ((SMALL_REGISTER_CLASSES && *reg_parm_seen)
|| preserve_subexpressions_p ()))
args[i].value = copy_to_mode_reg (args[i].mode, args[i].value);
/* If we don't have the required alignment, must do this in BLKmode. */
if ((*low_to_save & (MIN (GET_MODE_SIZE (save_mode),
- BIGGEST_ALIGNMENT / UNITS_PER_WORD) - 1)))
+ BIGGEST_ALIGNMENT / UNITS_PER_WORD) - 1)))
save_mode = BLKmode;
#ifdef ARGS_GROW_DOWNWARD
plus_constant (argblock,
*low_to_save)));
#endif
+
+ set_mem_align (stack_area, PARM_BOUNDARY);
if (save_mode == BLKmode)
{
save_area = assign_stack_temp (BLKmode, num_to_save, 0);
emit_move_insn (save_area, stack_area);
}
}
+
return save_area;
}
move_by_pieces (stack_area, validize_mem (save_area),
high_to_save - low_to_save + 1, PARM_BOUNDARY);
}
-#endif
-
+#endif /* REG_PARM_STACK_SPACE */
+
/* If any elements in ARGS refer to parameters that are to be passed in
registers, but not in memory, and whose alignment does not permit a
direct copy into registers. Copy the values into a group of pseudos
- which we will later copy into the appropriate hard registers.
+ which we will later copy into the appropriate hard registers.
Pseudos for each unaligned argument will be stored into the array
args[argnum].aligned_regs. The caller is responsible for deallocating
int num_actuals;
{
int i, j;
-
+
for (i = 0; i < num_actuals; i++)
if (args[i].reg != 0 && ! args[i].pass_on_stack
&& args[i].mode == BLKmode
significant byte (to the right). On a BYTES_BIG_ENDIAN machine,
this means we must skip the empty high order bytes when
calculating the bit offset. */
- if (BYTES_BIG_ENDIAN && bytes < UNITS_PER_WORD)
+ if (BYTES_BIG_ENDIAN
+ && !FUNCTION_ARG_REG_LITTLE_ENDIAN
+ && bytes < UNITS_PER_WORD)
big_endian_correction = (BITS_PER_WORD - (bytes * BITS_PER_UNIT));
for (j = 0; j < args[i].n_aligned_regs; j++)
rtx reg = gen_reg_rtx (word_mode);
rtx word = operand_subword_force (args[i].value, j, BLKmode);
int bitsize = MIN (bytes * BITS_PER_UNIT, BITS_PER_WORD);
- int bitalign = TYPE_ALIGN (TREE_TYPE (args[i].tree_value));
args[i].aligned_regs[j] = reg;
bytes -= bitsize / BITS_PER_UNIT;
store_bit_field (reg, bitsize, big_endian_correction, word_mode,
extract_bit_field (word, bitsize, 0, 1, NULL_RTX,
- word_mode, word_mode, bitalign,
+ word_mode, word_mode,
BITS_PER_WORD),
- bitalign, BITS_PER_WORD);
+ BITS_PER_WORD);
}
}
}
/* Fill in ARGS_SIZE and ARGS array based on the parameters found in
- ACTPARMS.
+ ACTPARMS.
NUM_ACTUALS is the total number of parameters.
struct args_size alignment_pad;
int i;
tree p;
-
+
args_size->constant = 0;
args_size->var = 0;
but it is safe in the only case where this is a useful
optimization; namely, when the argument is a plain object.
In that case, the frontend is just asking the backend to
- make a bitwise copy of the argument. */
-
+ make a bitwise copy of the argument. */
+
if (TREE_CODE (args[i].tree_value) == TARGET_EXPR
&& (DECL_P (TREE_OPERAND (args[i].tree_value, 1)))
&& ! REG_P (DECL_RTL (TREE_OPERAND (args[i].tree_value, 1))))
args[i].tree_value);
type = build_pointer_type (type);
}
+ else if (TREE_CODE (args[i].tree_value) == TARGET_EXPR)
+ {
+ /* In the V3 C++ ABI, parameters are destroyed in the caller.
+ We implement this by passing the address of the temporary
+ rather than expanding it into another allocated slot. */
+ args[i].tree_value = build1 (ADDR_EXPR,
+ build_pointer_type (type),
+ args[i].tree_value);
+ type = build_pointer_type (type);
+ }
else
{
/* We make a copy of the object and pass the address to the
copy = assign_temp (type, 0, 1, 0);
store_expr (args[i].tree_value, copy, 0);
- *ecf_flags &= ~(ECF_CONST | ECF_PURE);
+ *ecf_flags &= ~(ECF_CONST | ECF_PURE | ECF_LIBCALL_BLOCK);
args[i].tree_value = build1 (ADDR_EXPR,
build_pointer_type (type),
register window has to be unwinded before calling the routine, so
arguments have to go into the incoming registers. */
args[i].tail_call_reg = FUNCTION_INCOMING_ARG (*args_so_far, mode, type,
- argpos < n_named_args);
+ argpos < n_named_args);
#else
args[i].tail_call_reg = args[i].reg;
#endif
/* If this is an addressable type, we cannot pre-evaluate it. Thus,
we cannot consider this function call constant. */
if (TREE_ADDRESSABLE (type))
- *ecf_flags &= ~(ECF_CONST | ECF_PURE);
+ *ecf_flags &= ~ECF_LIBCALL_BLOCK;
/* Compute the stack-size of this argument. */
if (args[i].reg == 0 || args[i].partial != 0
args[i].size.constant -= ((args[i].partial * UNITS_PER_WORD)
/ (PARM_BOUNDARY / BITS_PER_UNIT)
* (PARM_BOUNDARY / BITS_PER_UNIT));
-
+
/* Update ARGS_SIZE, the total stack space for args so far. */
args_size->constant += args[i].size.constant;
static int
compute_argument_block_size (reg_parm_stack_space, args_size,
- preferred_stack_boundary)
+ preferred_stack_boundary)
int reg_parm_stack_space;
struct args_size *args_size;
int preferred_stack_boundary ATTRIBUTE_UNUSED;
/* For accumulate outgoing args mode we don't need to align, since the frame
will be already aligned. Align to STACK_BOUNDARY in order to prevent
- backends from generating missaligned frame sizes. */
-#ifdef STACK_BOUNDARY
+ backends from generating misaligned frame sizes. */
if (ACCUMULATE_OUTGOING_ARGS && preferred_stack_boundary > STACK_BOUNDARY)
preferred_stack_boundary = STACK_BOUNDARY;
-#endif
/* Compute the actual size of the argument block required. The variable
and constant sizes must be combined, the size may have to be rounded,
args_size->var = ARGS_SIZE_TREE (*args_size);
args_size->constant = 0;
-#ifdef PREFERRED_STACK_BOUNDARY
preferred_stack_boundary /= BITS_PER_UNIT;
if (preferred_stack_boundary > 1)
{
/* We don't handle this case yet. To handle it correctly we have
- to add the delta, round and substract the delta.
+ to add the delta, round and subtract the delta.
Currently no machine description requires this support. */
if (stack_pointer_delta & (preferred_stack_boundary - 1))
- abort();
+ abort ();
args_size->var = round_up (args_size->var, preferred_stack_boundary);
}
-#endif
if (reg_parm_stack_space > 0)
{
}
else
{
-#ifdef PREFERRED_STACK_BOUNDARY
preferred_stack_boundary /= BITS_PER_UNIT;
if (preferred_stack_boundary < 1)
preferred_stack_boundary = 1;
/ preferred_stack_boundary
* preferred_stack_boundary)
- stack_pointer_delta);
-#endif
args_size->constant = MAX (args_size->constant,
reg_parm_stack_space);
NUM_ACTUALS is the number of arguments.
- ARGS is an array containing information for each argument; this routine
- fills in the INITIAL_VALUE and VALUE fields for each precomputed argument.
- */
+ ARGS is an array containing information for each argument; this
+ routine fills in the INITIAL_VALUE and VALUE fields for each
+ precomputed argument. */
static void
precompute_arguments (flags, num_actuals, args)
function call which will store arguments on the stack.
Otherwise, evaluating the parameter may clobber previous parameters
which have already been stored into the stack. (we have code to avoid
- such case by saving the ougoing stack arguments, but it results in
+ such case by saving the outgoing stack arguments, but it results in
worse code) */
for (i = 0; i < num_actuals; i++)
- if ((flags & (ECF_CONST | ECF_PURE))
+ if ((flags & ECF_LIBCALL_BLOCK)
|| calls_function (args[i].tree_value, !ACCUMULATE_OUTGOING_ARGS))
{
+ enum machine_mode mode;
+
/* If this is an addressable type, we cannot pre-evaluate it. */
if (TREE_ADDRESSABLE (TREE_TYPE (args[i].tree_value)))
abort ();
args[i].initial_value = args[i].value
= protect_from_queue (args[i].value, 0);
- if (TYPE_MODE (TREE_TYPE (args[i].tree_value)) != args[i].mode)
+ mode = TYPE_MODE (TREE_TYPE (args[i].tree_value));
+ if (mode != args[i].mode)
{
args[i].value
- = convert_modes (args[i].mode,
- TYPE_MODE (TREE_TYPE (args[i].tree_value)),
+ = convert_modes (args[i].mode, mode,
args[i].value, args[i].unsignedp);
#ifdef PROMOTE_FOR_CALL_ONLY
/* CSE will replace this only if it contains args[i].value
&& GET_MODE_CLASS (args[i].mode) == MODE_INT)
{
args[i].initial_value
- = gen_rtx_SUBREG (TYPE_MODE (TREE_TYPE (args[i].tree_value)),
- args[i].value, 0);
+ = gen_lowpart_SUBREG (mode, args[i].value);
SUBREG_PROMOTED_VAR_P (args[i].initial_value) = 1;
SUBREG_PROMOTED_UNSIGNED_P (args[i].initial_value)
= args[i].unsignedp;
/* If we preallocated stack space, compute the address of each argument
and store it into the ARGS array.
- We need not ensure it is a valid memory address here; it will be
+ We need not ensure it is a valid memory address here; it will be
validized when it is used.
ARGBLOCK is an rtx for the address of the outgoing arguments. */
outgoing arguments and we cannot allow reordering of reads
from function arguments with stores to outgoing arguments
of sibling calls. */
- MEM_ALIAS_SET (args[i].stack) = 0;
- MEM_ALIAS_SET (args[i].stack_slot) = 0;
+ set_mem_alias_set (args[i].stack, 0);
+ set_mem_alias_set (args[i].stack_slot, 0);
}
}
}
-
+
/* Given a FNDECL and EXP, return an rtx suitable for use as a target address
in a call instruction.
{
rtx funaddr;
push_temp_slots ();
- funaddr = funexp =
- expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, VOIDmode, 0);
- pop_temp_slots (); /* FUNEXP can't be BLKmode */
-
- /* Check the function is executable. */
- if (current_function_check_memory_usage)
- {
-#ifdef POINTERS_EXTEND_UNSIGNED
- /* It might be OK to convert funexp in place, but there's
- a lot going on between here and when it happens naturally
- that this seems safer. */
- funaddr = convert_memory_address (Pmode, funexp);
-#endif
- emit_library_call (chkr_check_exec_libfunc, 1,
- VOIDmode, 1,
- funaddr, Pmode);
- }
+ funaddr = funexp
+ = expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, VOIDmode, 0);
+ pop_temp_slots (); /* FUNEXP can't be BLKmode. */
emit_queue ();
}
return funexp;
/* Do the register loads required for any wholly-register parms or any
parms which are passed both on the stack and in a register. Their
- expressions were already evaluated.
+ expressions were already evaluated.
Mark all register-parms as living through the call, putting these USE
insns in the CALL_INSN_FUNCTION_USAGE field. */
if (GET_CODE (reg) == PARALLEL)
emit_group_load (reg, args[i].value,
- int_size_in_bytes (TREE_TYPE (args[i].tree_value)),
- TYPE_ALIGN (TREE_TYPE (args[i].tree_value)));
+ int_size_in_bytes (TREE_TYPE (args[i].tree_value)));
/* If simple case, just do move. If normal partial, store_one_arg
has already loaded the register for us. In all other cases,
outgoing argument list in addition to the requested
space, but there is no way to ask for stack space such
that an argument list of a certain length can be
- safely constructed.
+ safely constructed.
Add the stack space reserved for register arguments, if
any, in the inline function. What is really needed is the
just pushed the arguments without adjust the stack here. */
HOST_WIDE_INT unadjusted_alignment;
- unadjusted_alignment
+ unadjusted_alignment
= ((stack_pointer_delta + unadjusted_args_size)
% preferred_unit_stack_boundary);
-UNADJUSTED_ALIGNMENT modulo the PREFERRED_UNIT_STACK_BOUNDARY. */
/* Begin by trying to pop all the bytes. */
- unadjusted_alignment
- = (unadjusted_alignment
+ unadjusted_alignment
+ = (unadjusted_alignment
- (pending_stack_adjust % preferred_unit_stack_boundary));
adjustment = pending_stack_adjust;
/* Push enough additional bytes that the stack will be aligned
after the arguments are pushed. */
if (preferred_unit_stack_boundary > 1)
{
- if (unadjusted_alignment >= 0)
- adjustment -= preferred_unit_stack_boundary - unadjusted_alignment;
+ if (unadjusted_alignment > 0)
+ adjustment -= preferred_unit_stack_boundary - unadjusted_alignment;
else
- adjustment += unadjusted_alignment;
+ adjustment += unadjusted_alignment;
}
-
+
/* Now, sets ARGS_SIZE->CONSTANT so that we pop the right number of
bytes after the call. The right number is the entire
PENDING_STACK_ADJUST less our ADJUSTMENT plus the amount required
by the arguments in the first place. */
- args_size->constant
+ args_size->constant
= pending_stack_adjust - adjustment + unadjusted_args_size;
return adjustment;
else
return 0;
+#ifdef ARGS_GROW_DOWNWARD
+ i = -i - GET_MODE_SIZE (GET_MODE (x));
+#endif
+
for (k = 0; k < GET_MODE_SIZE (GET_MODE (x)); k++)
if (i + k < stored_args_map->n_bits
&& TEST_BIT (stored_args_map, i + k))
return 0;
}
- /* Scan all subexpressions. */
+ /* Scan all subexpressions. */
fmt = GET_RTX_FORMAT (code);
for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
{
if (*fmt == 'e')
- {
- if (check_sibcall_argument_overlap_1 (XEXP (x, i)))
- return 1;
- }
+ {
+ if (check_sibcall_argument_overlap_1 (XEXP (x, i)))
+ return 1;
+ }
else if (*fmt == 'E')
- {
- for (j = 0; j < XVECLEN (x, i); j++)
- if (check_sibcall_argument_overlap_1 (XVECEXP (x, i, j)))
- return 1;
- }
+ {
+ for (j = 0; j < XVECLEN (x, i); j++)
+ if (check_sibcall_argument_overlap_1 (XVECEXP (x, i, j)))
+ return 1;
+ }
}
return 0;
-
}
/* Scan sequence after INSN if it does not dereference any argument slots
check_sibcall_argument_overlap (insn, arg)
rtx insn;
struct arg_data *arg;
-{
+{
int low, high;
if (insn == NULL_RTX)
insn = NEXT_INSN (insn);
for (; insn; insn = NEXT_INSN (insn))
- if (INSN_P (insn) &&
- check_sibcall_argument_overlap_1 (PATTERN (insn)))
+ if (INSN_P (insn)
+ && check_sibcall_argument_overlap_1 (PATTERN (insn)))
break;
- low = arg->offset.constant;
+#ifdef ARGS_GROW_DOWNWARD
+ low = -arg->slot_offset.constant - arg->size.constant;
+#else
+ low = arg->slot_offset.constant;
+#endif
+
for (high = low + arg->size.constant; low < high; low++)
SET_BIT (stored_args_map, low);
return insn != NULL_RTX;
/* Declaration of the function being called,
or 0 if the function is computed (not known by name). */
tree fndecl = 0;
- char *name = 0;
rtx insn;
int try_tail_call = 1;
int try_tail_recursion = 1;
int reg_parm_seen;
/* Nonzero if this is an indirect function call. */
- /* Nonzero if we must avoid push-insns in the args for this call.
+ /* Nonzero if we must avoid push-insns in the args for this call.
If stack space is allocated for register parameters, but not by the
caller, then it is preallocated in the fixed part of the stack frame.
So the entire argument block must then be preallocated (i.e., we
int old_inhibit_defer_pop = inhibit_defer_pop;
int old_stack_allocated;
rtx call_fusage;
- register tree p = TREE_OPERAND (exp, 0);
- register int i;
+ tree p = TREE_OPERAND (exp, 0);
+ int i;
/* The alignment of the stack, in bits. */
HOST_WIDE_INT preferred_stack_boundary;
/* The alignment of the stack, in bytes. */
HOST_WIDE_INT preferred_unit_stack_boundary;
- /* The value of the function call can be put in a hard register. But
- if -fcheck-memory-usage, code which invokes functions (and thus
- damages some hard registers) can be inserted before using the value.
- So, target is always a pseudo-register in that case. */
- if (current_function_check_memory_usage)
- target = 0;
-
/* See if this is "nothrow" function call. */
if (TREE_NOTHROW (exp))
flags |= ECF_NOTHROW;
flags |= flags_from_decl_or_type (fndecl);
}
- /* If we don't have specific function to call, see if we have a
+ /* If we don't have specific function to call, see if we have a
attributes set in the type. */
else
flags |= flags_from_decl_or_type (TREE_TYPE (TREE_TYPE (p)));
- /* Mark if the function returns with the stack pointer depressed. */
- if (TREE_CODE (TREE_TYPE (TREE_TYPE (p))) == FUNCTION_TYPE
- && TYPE_RETURNS_STACK_DEPRESSED (TREE_TYPE (TREE_TYPE (p))))
- {
- flags |= ECF_SP_DEPRESSED;
- flags &= ~ (ECF_PURE | ECF_CONST);
- }
-
#ifdef REG_PARM_STACK_SPACE
#ifdef MAYBE_REG_PARM_STACK_SPACE
reg_parm_stack_space = MAYBE_REG_PARM_STACK_SPACE;
if (aggregate_value_p (exp))
{
/* This call returns a big structure. */
- flags &= ~(ECF_CONST | ECF_PURE);
+ flags &= ~(ECF_CONST | ECF_PURE | ECF_LIBCALL_BLOCK);
#ifdef PCC_STATIC_STRUCT_RETURN
{
structure_value_addr = XEXP (target, 0);
else
{
- /* Assign a temporary to hold the value. */
- tree d;
-
/* For variable-sized objects, we must be called with a target
specified. If we were to allocate space on the stack here,
we would have no way of knowing when to free it. */
+ rtx d = assign_temp (TREE_TYPE (exp), 1, 1, 1);
- if (struct_value_size < 0)
- abort ();
-
- /* This DECL is just something to feed to mark_addressable;
- it doesn't get pushed. */
- d = build_decl (VAR_DECL, NULL_TREE, TREE_TYPE (exp));
- DECL_RTL (d) = assign_temp (TREE_TYPE (exp), 1, 0, 1);
- mark_addressable (d);
- mark_temp_addr_taken (DECL_RTL (d));
- structure_value_addr = XEXP (DECL_RTL (d), 0);
- TREE_USED (d) = 1;
+ mark_temp_addr_taken (d);
+ structure_value_addr = XEXP (d, 0);
target = 0;
}
}
return temp;
}
- if (fndecl && DECL_NAME (fndecl))
- name = IDENTIFIER_POINTER (DECL_NAME (fndecl));
-
/* Figure out the amount to which the stack should be aligned. */
-#ifdef PREFERRED_STACK_BOUNDARY
preferred_stack_boundary = PREFERRED_STACK_BOUNDARY;
-#else
- preferred_stack_boundary = STACK_BOUNDARY;
-#endif
/* Operand 0 is a pointer-to-function; get the type of the function. */
funtype = TREE_TYPE (TREE_OPERAND (exp, 0));
or not. */
INIT_CUMULATIVE_ARGS (args_so_far, funtype, NULL_RTX, (fndecl == 0));
-
/* Make a vector to hold all the information about each arg. */
- args = (struct arg_data *) alloca (num_actuals
- * sizeof (struct arg_data));
- bzero ((char *) args, num_actuals * sizeof (struct arg_data));
+ args = (struct arg_data *) alloca (num_actuals * sizeof (struct arg_data));
+ memset ((char *) args, 0, num_actuals * sizeof (struct arg_data));
- /* Build up entries inthe ARGS array, compute the size of the arguments
- into ARGS_SIZE, etc. */
+ /* Build up entries in the ARGS array, compute the size of the
+ arguments into ARGS_SIZE, etc. */
initialize_argument_information (num_actuals, args, &args_size,
n_named_args, actparms, fndecl,
&args_so_far, reg_parm_stack_space,
/* If this function requires a variable-sized argument list, don't
try to make a cse'able block for this call. We may be able to
do this eventually, but it is too complicated to keep track of
- what insns go in the cse'able block and which don't. */
+ what insns go in the cse'able block and which don't. */
- flags &= ~(ECF_CONST | ECF_PURE);
+ flags &= ~ECF_LIBCALL_BLOCK;
must_preallocate = 1;
}
/* Tail calls can make things harder to debug, and we're traditionally
pushed these optimizations into -O2. Don't try if we're already
- expanding a call, as that means we're an argument. Similarly, if
- there's pending loops or cleanups we know there's code to follow
- the call.
+ expanding a call, as that means we're an argument. Don't try if
+ there's cleanups, as we know there's code to follow the call.
- If rtx_equal_function_value_matters is false, that means we've
+ If rtx_equal_function_value_matters is false, that means we've
finished with regular parsing. Which means that some of the
machinery we use to generate tail-calls is no longer in place.
This is most often true of sjlj-exceptions, which we couldn't
if (currently_expanding_call++ != 0
|| !flag_optimize_sibling_calls
|| !rtx_equal_function_value_matters
- || !stmt_loop_nest_empty ()
|| any_pending_cleanups (1)
|| args_size.var)
try_tail_call = try_tail_recursion = 0;
before the sibcall_epilogue. */
|| fndecl == NULL_TREE
|| (flags & (ECF_RETURNS_TWICE | ECF_LONGJMP))
+ || TREE_THIS_VOLATILE (fndecl)
|| !FUNCTION_OK_FOR_SIBCALL (fndecl)
/* If this function requires more stack slots than the current
function, we cannot change it into a sibling call. */
(See unsafe_for_reeval commentary for details.)
Generate a new argument list. Pass safe arguments through
- unchanged. For the easy badness wrap them in UNSAVE_EXPRs.
+ unchanged. For the easy badness wrap them in UNSAVE_EXPRs.
For hard badness, evaluate them now and put their resulting
rtx in a temporary VAR_DECL.
initialize_argument_information has ordered the array for the
order to be pushed, and we must remember this when reconstructing
- the original argument orde. */
+ the original argument order. */
if (PUSH_ARGS_REVERSED)
{
end = num_actuals;
}
else
- {
+ {
inc = -1;
i = num_actuals - 1;
end = -1;
{
switch (unsafe_for_reeval (args[i].tree_value))
{
- case 0: /* Safe. */
- break;
+ case 0: /* Safe. */
+ break;
- case 1: /* Mildly unsafe. */
- args[i].tree_value = unsave_expr (args[i].tree_value);
- break;
+ case 1: /* Mildly unsafe. */
+ args[i].tree_value = unsave_expr (args[i].tree_value);
+ break;
- case 2: /* Wildly unsafe. */
- {
- tree var = build_decl (VAR_DECL, NULL_TREE,
+ case 2: /* Wildly unsafe. */
+ {
+ tree var = build_decl (VAR_DECL, NULL_TREE,
TREE_TYPE (args[i].tree_value));
- DECL_RTL (var) = expand_expr (args[i].tree_value, NULL_RTX,
- VOIDmode, EXPAND_NORMAL);
+ SET_DECL_RTL (var,
+ expand_expr (args[i].tree_value, NULL_RTX,
+ VOIDmode, EXPAND_NORMAL));
args[i].tree_value = var;
- }
- break;
+ }
+ break;
- default:
- abort ();
- }
+ default:
+ abort ();
+ }
/* We need to build actparms for optimize_tail_recursion. We can
safely trash away TREE_PURPOSE, since it is unused by this
function. */
int save_pending_stack_adjust = pending_stack_adjust;
int save_stack_pointer_delta = stack_pointer_delta;
+ /* Emit any queued insns now; otherwise they would end up in
+ only one of the alternates. */
+ emit_queue ();
+
/* Use a new sequence to hold any RTL we generate. We do not even
know if we will use this RTL yet. The final decision can not be
made until after RTL generation for the entire function is
is subject to race conditions, just as with multithreaded
programs. */
- emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__bb_fork_func"), 0,
+ emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__bb_fork_func"),
+ LCT_ALWAYS_RETURN,
VOIDmode, 0);
}
for (pass = 0; pass < 2; pass++)
{
int sibcall_failure = 0;
- /* We want to emit ay pending stack adjustments before the tail
+ /* We want to emit any pending stack adjustments before the tail
recursion "call". That way we know any adjustment after the tail
recursion call can be ignored if we indeed use the tail recursion
call expansion. */
argblock = 0;
call_fusage = 0;
- /* Start a new sequence for the normal call case.
+ /* Start a new sequence for the normal call case.
From this point on, if the sibling call fails, we want to set
sibcall_failure instead of continuing the loop. */
expand_start_target_temps ();
}
- /* When calling a const function, we must pop the stack args right away,
- so that the pop is deleted or moved with the call. */
- if (flags & (ECF_CONST | ECF_PURE))
- NO_DEFER_POP;
-
/* Don't let pending stack adjusts add up to too much.
Also, do all pending adjustments now if there is any chance
this might be a call to alloca or if we are expanding a sibling
- call sequence. */
+ call sequence or if we are calling a function that is to return
+ with stack pointer depressed. */
if (pending_stack_adjust >= 32
- || (pending_stack_adjust > 0 && (flags & ECF_MAY_BE_ALLOCA))
+ || (pending_stack_adjust > 0
+ && (flags & (ECF_MAY_BE_ALLOCA | ECF_SP_DEPRESSED)))
|| pass == 0)
do_pending_stack_adjust ();
+ /* When calling a const function, we must pop the stack args right away,
+ so that the pop is deleted or moved with the call. */
+ if (pass && (flags & ECF_LIBCALL_BLOCK))
+ NO_DEFER_POP;
+
/* Push the temporary stack slot level so that we can free any
temporaries we make. */
push_temp_slots ();
-
#ifdef FINAL_REG_PARM_STACK_SPACE
reg_parm_stack_space = FINAL_REG_PARM_STACK_SPACE (args_size.constant,
args_size.var);
/* Now we are about to start emitting insns that can be deleted
if a libcall is deleted. */
- if (flags & (ECF_CONST | ECF_PURE | ECF_MALLOC))
+ if (pass && (flags & (ECF_LIBCALL_BLOCK | ECF_MALLOC)))
start_sequence ();
adjusted_args_size = args_size;
pattern, do not round up, since we'll be re-using whatever space our
caller provided. */
unadjusted_args_size
- = compute_argument_block_size (reg_parm_stack_space, &adjusted_args_size,
+ = compute_argument_block_size (reg_parm_stack_space,
+ &adjusted_args_size,
(pass == 0 ? 0
: preferred_stack_boundary));
- old_stack_allocated = stack_pointer_delta - pending_stack_adjust;
+ old_stack_allocated = stack_pointer_delta - pending_stack_adjust;
/* The argument block when performing a sibling call is the
incoming argument block. */
Therefore, we save any area of the stack that was already
written and that we are using. Here we set up to do this
by making a new stack usage map from the old one. The
- actual save will be done by store_one_arg.
+ actual save will be done by store_one_arg.
Another approach might be to try to reorder the argument
evaluations to avoid this conflicting stack usage. */
= (char *) alloca (highest_outgoing_arg_in_use);
if (initial_highest_arg_in_use)
- bcopy (initial_stack_usage_map, stack_usage_map,
- initial_highest_arg_in_use);
+ memcpy (stack_usage_map, initial_stack_usage_map,
+ initial_highest_arg_in_use);
if (initial_highest_arg_in_use != highest_outgoing_arg_in_use)
- bzero (&stack_usage_map[initial_highest_arg_in_use],
+ memset (&stack_usage_map[initial_highest_arg_in_use], 0,
(highest_outgoing_arg_in_use
- initial_highest_arg_in_use));
needed = 0;
/* The address of the outgoing argument list must not be
copied to a register here, because argblock would be left
pointing to the wrong place after the call to
- allocate_dynamic_stack_space below. */
+ allocate_dynamic_stack_space below. */
argblock = virtual_outgoing_args_rtx;
- }
+ }
else
{
if (inhibit_defer_pop == 0)
/* Try to reuse some or all of the pending_stack_adjust
to get this space. */
needed
- = (combine_pending_stack_adjustment_and_call
+ = (combine_pending_stack_adjustment_and_call
(unadjusted_args_size,
&adjusted_args_size,
preferred_unit_stack_boundary));
do_pending_stack_adjust ();
needed = 0;
}
- else
+ else
/* We need to allocate space. We'll do that in
push_block below. */
pending_stack_adjust = 0;
/* Make a new map for the new argument list. */
stack_usage_map = (char *)
alloca (highest_outgoing_arg_in_use);
- bzero (stack_usage_map, highest_outgoing_arg_in_use);
+ memset (stack_usage_map, 0, highest_outgoing_arg_in_use);
highest_outgoing_arg_in_use = 0;
}
allocate_dynamic_stack_space (push_size, NULL_RTX,
compute_argument_addresses (args, argblock, num_actuals);
-#ifdef PREFERRED_STACK_BOUNDARY
/* If we push args individually in reverse order, perform stack alignment
before the first push (the last arg). */
if (PUSH_ARGS_REVERSED && argblock == 0
{
/* When the stack adjustment is pending, we get better code
by combining the adjustments. */
- if (pending_stack_adjust
- && ! (flags & (ECF_CONST | ECF_PURE))
+ if (pending_stack_adjust
+ && ! (flags & ECF_LIBCALL_BLOCK)
&& ! inhibit_defer_pop)
{
pending_stack_adjust
- = (combine_pending_stack_adjustment_and_call
+ = (combine_pending_stack_adjustment_and_call
(unadjusted_args_size,
&adjusted_args_size,
preferred_unit_stack_boundary));
/* Now that the stack is properly aligned, pops can't safely
be deferred during the evaluation of the arguments. */
NO_DEFER_POP;
-#endif
-
- /* Don't try to defer pops if preallocating, not even from the first arg,
- since ARGBLOCK probably refers to the SP. */
- if (argblock)
- NO_DEFER_POP;
funexp = rtx_for_function_call (fndecl, exp);
sibcall_failure = 1;
}
-#ifdef PREFERRED_STACK_BOUNDARY
/* If we pushed args in forward order, perform stack alignment
after pushing the last arg. */
if (!PUSH_ARGS_REVERSED && argblock == 0)
anti_adjust_stack (GEN_INT (adjusted_args_size.constant
- unadjusted_args_size));
-#endif
/* If register arguments require space on the stack and stack space
was not preallocated, allocate stack space here for arguments
passed in registers. */
#ifdef OUTGOING_REG_PARM_STACK_SPACE
if (!ACCUMULATE_OUTGOING_ARGS
- && must_preallocate == 0 && reg_parm_stack_space > 0)
+ && must_preallocate == 0 && reg_parm_stack_space > 0)
anti_adjust_stack (GEN_INT (reg_parm_stack_space));
#endif
force_operand (structure_value_addr,
NULL_RTX)));
- /* Mark the memory for the aggregate as write-only. */
- if (current_function_check_memory_usage)
- emit_library_call (chkr_set_right_libfunc, 1,
- VOIDmode, 3,
- structure_value_addr, ptr_mode,
- GEN_INT (struct_value_size),
- TYPE_MODE (sizetype),
- GEN_INT (MEMORY_USE_WO),
- TYPE_MODE (integer_type_node));
-
if (GET_CODE (struct_value_rtx) == REG)
use_reg (&call_fusage, struct_value_rtx);
}
funexp = prepare_call_address (funexp, fndecl, &call_fusage,
- reg_parm_seen);
+ reg_parm_seen, pass == 0);
load_register_parameters (args, num_actuals, &call_fusage, flags);
-
+
/* Perform postincrements before actually calling the function. */
emit_queue ();
/* All arguments and registers used for the call must be set up by
now! */
-#ifdef PREFERRED_STACK_BOUNDARY
/* Stack must be properly aligned now. */
if (pass && stack_pointer_delta % preferred_unit_stack_boundary)
abort ();
-#endif
/* Generate the actual call instruction. */
emit_call_1 (funexp, fndecl, funtype, unadjusted_args_size,
/* Verify that we've deallocated all the stack we used. */
if (pass
- && old_stack_allocated != stack_pointer_delta - pending_stack_adjust)
- abort();
+ && old_stack_allocated != stack_pointer_delta - pending_stack_adjust)
+ abort ();
/* If call is cse'able, make appropriate pair of reg-notes around it.
Test valreg so we don't crash; may safely ignore `const'
if return type is void. Disable for PARALLEL return values, because
we have no way to move such values into a pseudo register. */
- if (pass
- && (flags & (ECF_CONST | ECF_PURE))
- && valreg != 0 && GET_CODE (valreg) != PARALLEL)
+ if (pass && (flags & ECF_LIBCALL_BLOCK))
{
- rtx note = 0;
- rtx temp = gen_reg_rtx (GET_MODE (valreg));
rtx insns;
- /* Mark the return value as a pointer if needed. */
- if (TREE_CODE (TREE_TYPE (exp)) == POINTER_TYPE)
- mark_reg_pointer (temp, TYPE_ALIGN (TREE_TYPE (TREE_TYPE (exp))));
-
- /* Construct an "equal form" for the value which mentions all the
- arguments in order as well as the function name. */
- for (i = 0; i < num_actuals; i++)
- note = gen_rtx_EXPR_LIST (VOIDmode, args[i].initial_value, note);
- note = gen_rtx_EXPR_LIST (VOIDmode, funexp, note);
-
- insns = get_insns ();
- end_sequence ();
-
- if (flags & ECF_PURE)
- note = gen_rtx_EXPR_LIST (VOIDmode,
- gen_rtx_USE (VOIDmode,
- gen_rtx_MEM (BLKmode,
- gen_rtx_SCRATCH (VOIDmode))), note);
-
- emit_libcall_block (insns, temp, valreg, note);
-
- valreg = temp;
- }
- else if (flags & (ECF_CONST | ECF_PURE))
- {
- /* Otherwise, just write out the sequence without a note. */
- rtx insns = get_insns ();
-
- end_sequence ();
- emit_insns (insns);
+ if (valreg == 0 || GET_CODE (valreg) == PARALLEL)
+ {
+ insns = get_insns ();
+ end_sequence ();
+ emit_insns (insns);
+ }
+ else
+ {
+ rtx note = 0;
+ rtx temp = gen_reg_rtx (GET_MODE (valreg));
+
+ /* Mark the return value as a pointer if needed. */
+ if (TREE_CODE (TREE_TYPE (exp)) == POINTER_TYPE)
+ mark_reg_pointer (temp,
+ TYPE_ALIGN (TREE_TYPE (TREE_TYPE (exp))));
+
+ /* Construct an "equal form" for the value which mentions all the
+ arguments in order as well as the function name. */
+ for (i = 0; i < num_actuals; i++)
+ note = gen_rtx_EXPR_LIST (VOIDmode,
+ args[i].initial_value, note);
+ note = gen_rtx_EXPR_LIST (VOIDmode, funexp, note);
+
+ insns = get_insns ();
+ end_sequence ();
+
+ if (flags & ECF_PURE)
+ note = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_USE (VOIDmode,
+ gen_rtx_MEM (BLKmode,
+ gen_rtx_SCRATCH (VOIDmode))),
+ note);
+
+ emit_libcall_block (insns, temp, valreg, note);
+
+ valreg = temp;
+ }
}
- else if (flags & ECF_MALLOC)
+ else if (pass && (flags & ECF_MALLOC))
{
rtx temp = gen_reg_rtx (GET_MODE (valreg));
rtx last, insns;
- /* The return value from a malloc-like function is a pointer. */
+ /* The return value from a malloc-like function is a pointer. */
if (TREE_CODE (TREE_TYPE (exp)) == POINTER_TYPE)
mark_reg_pointer (temp, BIGGEST_ALIGNMENT);
/* The return value from a malloc-like function can not alias
anything else. */
last = get_last_insn ();
- REG_NOTES (last) =
+ REG_NOTES (last) =
gen_rtx_EXPR_LIST (REG_NOALIAS, temp, REG_NOTES (last));
/* Write out the sequence. */
if nonvolatile values are live. For functions that cannot return,
inform flow that control does not fall through. */
- if ((flags & (ECF_RETURNS_TWICE | ECF_NORETURN | ECF_LONGJMP)) || pass == 0)
+ if ((flags & (ECF_NORETURN | ECF_LONGJMP)) || pass == 0)
{
- /* The barrier or NOTE_INSN_SETJMP note must be emitted
+ /* The barrier must be emitted
immediately after the CALL_INSN. Some ports emit more
than just a CALL_INSN above, so we must search for it here. */
abort ();
}
- if (flags & ECF_RETURNS_TWICE)
- {
- emit_note_after (NOTE_INSN_SETJMP, last);
- current_function_calls_setjmp = 1;
- }
- else
- emit_barrier_after (last);
+ emit_barrier_after (last);
}
if (flags & ECF_LONGJMP)
if (TYPE_MODE (TREE_TYPE (exp)) == VOIDmode
|| ignore)
- {
- target = const0_rtx;
- }
+ target = const0_rtx;
else if (structure_value_addr)
{
if (target == 0 || GET_CODE (target) != MEM)
The Irix 6 ABI has examples of this. */
else if (GET_CODE (valreg) == PARALLEL)
{
- int bytes = int_size_in_bytes (TREE_TYPE (exp));
-
if (target == 0)
{
- target = assign_stack_temp (TYPE_MODE (TREE_TYPE (exp)),
- bytes, 0);
- MEM_SET_IN_STRUCT_P (target, AGGREGATE_TYPE_P (TREE_TYPE (exp)));
+ /* This will only be assigned once, so it can be readonly. */
+ tree nt = build_qualified_type (TREE_TYPE (exp),
+ (TYPE_QUALS (TREE_TYPE (exp))
+ | TYPE_QUAL_CONST));
+
+ target = assign_temp (nt, 0, 1, 1);
preserve_temp_slots (target);
}
if (! rtx_equal_p (target, valreg))
- emit_group_store (target, valreg, bytes,
- TYPE_ALIGN (TREE_TYPE (exp)));
+ emit_group_store (target, valreg,
+ int_size_in_bytes (TREE_TYPE (exp)));
/* We can not support sibling calls for this case. */
sibcall_failure = 1;
emit_move_insn (target, valreg);
}
else if (TYPE_MODE (TREE_TYPE (exp)) == BLKmode)
- target = copy_blkmode_from_reg (target, valreg, TREE_TYPE (exp));
+ {
+ target = copy_blkmode_from_reg (target, valreg, TREE_TYPE (exp));
+
+ /* We can not support sibling calls for this case. */
+ sibcall_failure = 1;
+ }
else
target = copy_to_reg (valreg);
{
tree type = TREE_TYPE (exp);
int unsignedp = TREE_UNSIGNED (type);
+ int offset = 0;
/* If we don't promote as expected, something is wrong. */
if (GET_MODE (target)
!= promote_mode (type, TYPE_MODE (type), &unsignedp, 1))
abort ();
- target = gen_rtx_SUBREG (TYPE_MODE (type), target, 0);
+ if ((WORDS_BIG_ENDIAN || BYTES_BIG_ENDIAN)
+ && GET_MODE_SIZE (GET_MODE (target))
+ > GET_MODE_SIZE (TYPE_MODE (type)))
+ {
+ offset = GET_MODE_SIZE (GET_MODE (target))
+ - GET_MODE_SIZE (TYPE_MODE (type));
+ if (! BYTES_BIG_ENDIAN)
+ offset = (offset / UNITS_PER_WORD) * UNITS_PER_WORD;
+ else if (! WORDS_BIG_ENDIAN)
+ offset %= UNITS_PER_WORD;
+ }
+ target = gen_rtx_SUBREG (TYPE_MODE (type), target, offset);
SUBREG_PROMOTED_VAR_P (target) = 1;
SUBREG_PROMOTED_UNSIGNED_P (target) = unsignedp;
}
else
emit_block_move (stack_area,
validize_mem (args[i].save_area),
- GEN_INT (args[i].size.constant),
- PARM_BOUNDARY);
+ GEN_INT (args[i].size.constant));
}
highest_outgoing_arg_in_use = initial_highest_arg_in_use;
stack_usage_map = initial_stack_usage_map;
}
- /* If this was alloca, record the new stack level for nonlocal gotos.
+ /* If this was alloca, record the new stack level for nonlocal gotos.
Check for the handler slots since we might not have a save area
for non-local gotos. */
{
tail_call_insns = insns;
- /* If something prevents making this a sibling call,
- zero out the sequence. */
- if (sibcall_failure)
- tail_call_insns = NULL_RTX;
/* Restore the pending stack adjustment now that we have
finished generating the sibling call sequence. */
stack_pointer_delta = save_stack_pointer_delta;
/* Prepare arg structure for next iteration. */
- for (i = 0 ; i < num_actuals ; i++)
+ for (i = 0; i < num_actuals; i++)
{
args[i].value = 0;
args[i].aligned_regs = 0;
}
else
normal_call_insns = insns;
+
+ /* If something prevents making this a sibling call,
+ zero out the sequence. */
+ if (sibcall_failure)
+ tail_call_insns = NULL_RTX;
}
/* The function optimize_sibling_and_tail_recursive_calls doesn't
function who's expansion contains another CALL_PLACEHOLDER.
If there are any C_Ps in any of these sequences, replace them
- with their normal call. */
+ with their normal call. */
for (insn = normal_call_insns; insn; insn = NEXT_INSN (insn))
if (GET_CODE (insn) == CALL_INSN
return target;
}
\f
-/* Returns nonzero if FUN is the symbol for a library function which can
- not throw. */
-
-static int
-libfunc_nothrow (fun)
- rtx fun;
-{
- if (fun == throw_libfunc
- || fun == rethrow_libfunc
- || fun == sjthrow_libfunc
- || fun == sjpopnthrow_libfunc)
- return 0;
-
- return 1;
-}
-\f
/* Output a library call to function FUN (a SYMBOL_REF rtx).
- The RETVAL parameter specifies whether return value needs to be saved, other
- parameters are documented in the emit_library_call function bellow. */
+ The RETVAL parameter specifies whether return value needs to be saved, other
+ parameters are documented in the emit_library_call function below. */
+
static rtx
emit_library_call_value_1 (retval, orgfun, value, fn_type, outmode, nargs, p)
int retval;
rtx orgfun;
rtx value;
- int fn_type;
+ enum libcall_type fn_type;
enum machine_mode outmode;
int nargs;
va_list p;
struct args_size args_size;
/* Size of arguments before any adjustments (such as rounding). */
struct args_size original_args_size;
- register int argnum;
+ int argnum;
rtx fun;
int inc;
int count;
struct args_size alignment_pad;
rtx argblock = 0;
CUMULATIVE_ARGS args_so_far;
- struct arg { rtx value; enum machine_mode mode; rtx reg; int partial;
- struct args_size offset; struct args_size size; rtx save_area; };
+ struct arg
+ {
+ rtx value;
+ enum machine_mode mode;
+ rtx reg;
+ int partial;
+ struct args_size offset;
+ struct args_size size;
+ rtx save_area;
+ };
struct arg *argvec;
int old_inhibit_defer_pop = inhibit_defer_pop;
rtx call_fusage = 0;
rtx valreg;
int pcc_struct_value = 0;
int struct_value_size = 0;
- int flags = 0;
+ int flags;
int reg_parm_stack_space = 0;
int needed;
+ rtx before_call;
#ifdef REG_PARM_STACK_SPACE
/* Define the boundary of the register parm stack space that needs to be
save, if any. */
int low_to_save = -1, high_to_save = 0;
- rtx save_area = 0; /* Place that it is saved */
+ rtx save_area = 0; /* Place that it is saved. */
#endif
/* Size of the stack reserved for parameter registers. */
#endif
#endif
- if (fn_type == 1)
- flags |= ECF_CONST;
- else if (fn_type == 2)
- flags |= ECF_PURE;
- fun = orgfun;
+ /* By default, library functions can not throw. */
+ flags = ECF_NOTHROW;
- if (libfunc_nothrow (fun))
- flags |= ECF_NOTHROW;
+ switch (fn_type)
+ {
+ case LCT_NORMAL:
+ break;
+ case LCT_CONST:
+ flags |= ECF_CONST;
+ break;
+ case LCT_PURE:
+ flags |= ECF_PURE;
+ break;
+ case LCT_CONST_MAKE_BLOCK:
+ flags |= ECF_CONST | ECF_LIBCALL_BLOCK;
+ break;
+ case LCT_PURE_MAKE_BLOCK:
+ flags |= ECF_PURE | ECF_LIBCALL_BLOCK;
+ break;
+ case LCT_NORETURN:
+ flags |= ECF_NORETURN;
+ break;
+ case LCT_THROW:
+ flags = ECF_NORETURN;
+ break;
+ case LCT_ALWAYS_RETURN:
+ flags = ECF_ALWAYS_RETURN;
+ break;
+ case LCT_RETURNS_TWICE:
+ flags = ECF_RETURNS_TWICE;
+ break;
+ }
+ fun = orgfun;
-#ifdef PREFERRED_STACK_BOUNDARY
/* Ensure current function's preferred stack boundary is at least
what we need. */
if (cfun->preferred_stack_boundary < PREFERRED_STACK_BOUNDARY)
cfun->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY;
-#endif
/* If this kind of value comes back in memory,
decide where in memory it should come back. */
if (value != 0 && GET_CODE (value) == MEM)
mem_value = value;
else
- mem_value = assign_stack_temp (outmode, GET_MODE_SIZE (outmode), 0);
+ mem_value = assign_temp (type_for_mode (outmode, 0), 0, 1, 1);
#endif
/* This call returns a big structure. */
- flags &= ~(ECF_CONST | ECF_PURE);
+ flags &= ~(ECF_CONST | ECF_PURE | ECF_LIBCALL_BLOCK);
}
/* ??? Unfinished: must pass the memory address as an argument. */
library functions shouldn't have many args. */
argvec = (struct arg *) alloca ((nargs + 1) * sizeof (struct arg));
- bzero ((char *) argvec, (nargs + 1) * sizeof (struct arg));
+ memset ((char *) argvec, 0, (nargs + 1) * sizeof (struct arg));
+#ifdef INIT_CUMULATIVE_LIBCALL_ARGS
+ INIT_CUMULATIVE_LIBCALL_ARGS (args_so_far, outmode, fun);
+#else
INIT_CUMULATIVE_ARGS (args_so_far, NULL_TREE, fun, 0);
+#endif
args_size.constant = 0;
args_size.var = 0;
/* Now we are about to start emitting insns that can be deleted
if a libcall is deleted. */
- if (flags & (ECF_CONST | ECF_PURE))
+ if (flags & ECF_LIBCALL_BLOCK)
start_sequence ();
push_temp_slots ();
NULL_TREE, &args_size, &argvec[count].offset,
&argvec[count].size, &alignment_pad);
-
if (argvec[count].reg == 0 || argvec[count].partial != 0
|| reg_parm_stack_space > 0)
args_size.constant += argvec[count].size.constant;
#ifdef FUNCTION_ARG_PASS_BY_REFERENCE
if (FUNCTION_ARG_PASS_BY_REFERENCE (args_so_far, mode, NULL_TREE, 1))
{
- /* We do not support FUNCTION_ARG_CALLEE_COPIES here since it can
- be viewed as just an efficiency improvement. */
- rtx slot = assign_stack_temp (mode, GET_MODE_SIZE (mode), 0);
- emit_move_insn (slot, val);
- val = force_operand (XEXP (slot, 0), NULL_RTX);
+ rtx slot;
+ int must_copy = 1
+#ifdef FUNCTION_ARG_CALLEE_COPIES
+ && ! FUNCTION_ARG_CALLEE_COPIES (args_so_far, mode,
+ NULL_TREE, 1)
+#endif
+ ;
+
+ if (GET_MODE (val) == MEM && ! must_copy)
+ slot = val;
+ else if (must_copy)
+ {
+ slot = assign_temp (type_for_mode (mode, 0), 0, 1, 1);
+ emit_move_insn (slot, val);
+ }
+ else
+ {
+ tree type = type_for_mode (mode, 0);
+
+ slot = gen_rtx_MEM (mode,
+ expand_expr (build1 (ADDR_EXPR,
+ build_pointer_type
+ (type),
+ make_tree (type, val)),
+ NULL_RTX, VOIDmode, 0));
+ }
+
+ call_fusage = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_USE (VOIDmode, slot),
+ call_fusage);
+ if (must_copy)
+ call_fusage = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_CLOBBER (VOIDmode,
+ slot),
+ call_fusage);
+
mode = Pmode;
+ val = force_operand (XEXP (slot, 0), NULL_RTX);
}
#endif
locate_and_pad_parm (mode, NULL_TREE,
#ifdef STACK_PARMS_IN_REG_PARM_AREA
- 1,
+ 1,
#else
argvec[count].reg != 0,
#endif
assemble_external_libcall (fun);
original_args_size = args_size;
-#ifdef PREFERRED_STACK_BOUNDARY
args_size.constant = (((args_size.constant
+ stack_pointer_delta
+ STACK_BYTES - 1)
/ STACK_BYTES
* STACK_BYTES)
- stack_pointer_delta);
-#endif
args_size.constant = MAX (args_size.constant,
reg_parm_stack_space);
stack_usage_map = (char *) alloca (highest_outgoing_arg_in_use);
if (initial_highest_arg_in_use)
- bcopy (initial_stack_usage_map, stack_usage_map,
- initial_highest_arg_in_use);
+ memcpy (stack_usage_map, initial_stack_usage_map,
+ initial_highest_arg_in_use);
if (initial_highest_arg_in_use != highest_outgoing_arg_in_use)
- bzero (&stack_usage_map[initial_highest_arg_in_use],
+ memset (&stack_usage_map[initial_highest_arg_in_use], 0,
highest_outgoing_arg_in_use - initial_highest_arg_in_use);
needed = 0;
- /* The address of the outgoing argument list must not be copied to a
- register here, because argblock would be left pointing to the
- wrong place after the call to allocate_dynamic_stack_space below.
- */
+ /* We must be careful to use virtual regs before they're instantiated,
+ and real regs afterwards. Loop optimization, for example, can create
+ new libcalls after we've instantiated the virtual regs, and if we
+ use virtuals anyway, they won't match the rtl patterns. */
- argblock = virtual_outgoing_args_rtx;
+ if (virtuals_instantiated)
+ argblock = plus_constant (stack_pointer_rtx, STACK_POINTER_OFFSET);
+ else
+ argblock = virtual_outgoing_args_rtx;
}
else
{
argblock = push_block (GEN_INT (args_size.constant), 0, 0);
}
-#ifdef PREFERRED_STACK_BOUNDARY
/* If we push args individually in reverse order, perform stack alignment
before the first push (the last arg). */
if (argblock == 0 && PUSH_ARGS_REVERSED)
anti_adjust_stack (GEN_INT (args_size.constant
- original_args_size.constant));
-#endif
if (PUSH_ARGS_REVERSED)
{
for (count = 0; count < reg_parm_stack_space; count++)
#endif
{
- if (count >= highest_outgoing_arg_in_use
+ if (count >= highest_outgoing_arg_in_use
|| stack_usage_map[count] == 0)
continue;
stack_area = gen_rtx_MEM (save_mode,
memory_address (save_mode,
plus_constant (argblock,
- - high_to_save)));
+ -high_to_save)));
#else
stack_area = gen_rtx_MEM (save_mode,
memory_address (save_mode,
if (save_mode == BLKmode)
{
save_area = assign_stack_temp (BLKmode, num_to_save, 0);
+ set_mem_align (save_area, PARM_BOUNDARY);
emit_block_move (validize_mem (save_area), stack_area,
- GEN_INT (num_to_save), PARM_BOUNDARY);
+ GEN_INT (num_to_save));
}
else
{
}
}
#endif
-
+
/* Push the args that need to be pushed. */
/* ARGNUM indexes the ARGVEC array in the order in which the arguments
are to be pushed. */
for (count = 0; count < nargs; count++, argnum += inc)
{
- register enum machine_mode mode = argvec[argnum].mode;
- register rtx val = argvec[argnum].value;
+ enum machine_mode mode = argvec[argnum].mode;
+ rtx val = argvec[argnum].value;
rtx reg = argvec[argnum].reg;
int partial = argvec[argnum].partial;
int lower_bound = 0, upper_bound = 0, i;
if (i != upper_bound)
{
/* We need to make a save area. See what mode we can make
- it. */
+ it. */
enum machine_mode save_mode
= mode_for_size (argvec[argnum].size.constant
* BITS_PER_UNIT,
}
}
-#ifdef PREFERRED_STACK_BOUNDARY
/* If we pushed args in forward order, perform stack alignment
after pushing the last arg. */
if (argblock == 0 && !PUSH_ARGS_REVERSED)
anti_adjust_stack (GEN_INT (args_size.constant
- original_args_size.constant));
-#endif
if (PUSH_ARGS_REVERSED)
argnum = nargs - 1;
else
argnum = 0;
- fun = prepare_call_address (fun, NULL_TREE, &call_fusage, 0);
+ fun = prepare_call_address (fun, NULL_TREE, &call_fusage, 0, 0);
/* Now load any reg parms into their regs. */
are to be pushed. */
for (count = 0; count < nargs; count++, argnum += inc)
{
- register rtx val = argvec[argnum].value;
+ rtx val = argvec[argnum].value;
rtx reg = argvec[argnum].reg;
int partial = argvec[argnum].partial;
/* Handle calls that pass values in multiple non-contiguous
locations. The PA64 has examples of this for library calls. */
if (reg != 0 && GET_CODE (reg) == PARALLEL)
- emit_group_load (reg, val,
- GET_MODE_SIZE (GET_MODE (val)),
- GET_MODE_ALIGNMENT (GET_MODE (val)));
+ emit_group_load (reg, val, GET_MODE_SIZE (GET_MODE (val)));
else if (reg != 0 && partial == 0)
emit_move_insn (reg, val);
force_operand (XEXP (mem_value, 0),
NULL_RTX)));
if (GET_CODE (struct_value_rtx) == REG)
- use_reg (&call_fusage, struct_value_rtx);
+ use_reg (&call_fusage, struct_value_rtx);
}
/* Don't allow popping to be deferred, since then
valreg = (mem_value == 0 && outmode != VOIDmode
? hard_libcall_value (outmode) : NULL_RTX);
-#ifdef PREFERRED_STACK_BOUNDARY
/* Stack must be properly aligned now. */
if (stack_pointer_delta & (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT - 1))
- abort();
-#endif
+ abort ();
+
+ before_call = get_last_insn ();
/* We pass the old value of inhibit_defer_pop + 1 to emit_call_1, which
will set inhibit_defer_pop to that value. */
always signed. We also assume that the list of arguments passed has
no impact, so we pretend it is unknown. */
- emit_call_1 (fun,
- get_identifier (XSTR (orgfun, 0)),
+ emit_call_1 (fun,
+ get_identifier (XSTR (orgfun, 0)),
build_function_type (outmode == VOIDmode ? void_type_node
: type_for_mode (outmode, 0), NULL_TREE),
- original_args_size.constant, args_size.constant,
+ original_args_size.constant, args_size.constant,
struct_value_size,
FUNCTION_ARG (args_so_far, VOIDmode, void_type_node, 1),
valreg,
old_inhibit_defer_pop + 1, call_fusage, flags);
+ /* For calls to `setjmp', etc., inform flow.c it should complain
+ if nonvolatile values are live. For functions that cannot return,
+ inform flow that control does not fall through. */
+
+ if (flags & (ECF_NORETURN | ECF_LONGJMP))
+ {
+ /* The barrier note must be emitted
+ immediately after the CALL_INSN. Some ports emit more than
+ just a CALL_INSN above, so we must search for it here. */
+
+ rtx last = get_last_insn ();
+ while (GET_CODE (last) != CALL_INSN)
+ {
+ last = PREV_INSN (last);
+ /* There was no CALL_INSN? */
+ if (last == before_call)
+ abort ();
+ }
+
+ emit_barrier_after (last);
+ }
+
/* Now restore inhibit_defer_pop to its actual original value. */
OK_DEFER_POP;
Test valreg so we don't crash; may safely ignore `const'
if return type is void. Disable for PARALLEL return values, because
we have no way to move such values into a pseudo register. */
- if ((flags & (ECF_CONST | ECF_PURE))
- && valreg != 0 && GET_CODE (valreg) != PARALLEL)
+ if (flags & ECF_LIBCALL_BLOCK)
{
- rtx note = 0;
- rtx temp = gen_reg_rtx (GET_MODE (valreg));
rtx insns;
- int i;
- /* Construct an "equal form" for the value which mentions all the
- arguments in order as well as the function name. */
- for (i = 0; i < nargs; i++)
- note = gen_rtx_EXPR_LIST (VOIDmode, argvec[i].value, note);
- note = gen_rtx_EXPR_LIST (VOIDmode, fun, note);
+ if (valreg == 0 || GET_CODE (valreg) == PARALLEL)
+ {
+ insns = get_insns ();
+ end_sequence ();
+ emit_insns (insns);
+ }
+ else
+ {
+ rtx note = 0;
+ rtx temp = gen_reg_rtx (GET_MODE (valreg));
+ int i;
- insns = get_insns ();
- end_sequence ();
+ /* Construct an "equal form" for the value which mentions all the
+ arguments in order as well as the function name. */
+ for (i = 0; i < nargs; i++)
+ note = gen_rtx_EXPR_LIST (VOIDmode, argvec[i].value, note);
+ note = gen_rtx_EXPR_LIST (VOIDmode, fun, note);
- if (flags & ECF_PURE)
- note = gen_rtx_EXPR_LIST (VOIDmode,
- gen_rtx_USE (VOIDmode,
- gen_rtx_MEM (BLKmode,
- gen_rtx_SCRATCH (VOIDmode))), note);
+ insns = get_insns ();
+ end_sequence ();
- emit_libcall_block (insns, temp, valreg, note);
+ if (flags & ECF_PURE)
+ note = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_USE (VOIDmode,
+ gen_rtx_MEM (BLKmode,
+ gen_rtx_SCRATCH (VOIDmode))),
+ note);
- valreg = temp;
- }
- else if (flags & (ECF_CONST | ECF_PURE))
- {
- /* Otherwise, just write out the sequence without a note. */
- rtx insns = get_insns ();
+ emit_libcall_block (insns, temp, valreg, note);
- end_sequence ();
- emit_insns (insns);
+ valreg = temp;
+ }
}
pop_temp_slots ();
memory_address (save_mode,
plus_constant (argblock, low_to_save)));
#endif
+
+ set_mem_align (stack_area, PARM_BOUNDARY);
if (save_mode != BLKmode)
emit_move_insn (stack_area, save_area);
else
emit_block_move (stack_area, validize_mem (save_area),
- GEN_INT (high_to_save - low_to_save + 1),
- PARM_BOUNDARY);
+ GEN_INT (high_to_save - low_to_save + 1));
}
#endif
-
+
/* If we saved any argument areas, restore them. */
for (count = 0; count < nargs; count++)
if (argvec[count].save_area)
and machine_modes to convert them to.
The rtx values should have been passed through protect_from_queue already.
- FN_TYPE will is zero for `normal' calls, one for `const' calls, wich
- which will be enclosed in REG_LIBCALL/REG_RETVAL notes and two for `pure'
- calls, that are handled like `const' calls with extra
- (use (memory (scratch)). */
+ FN_TYPE should be LCT_NORMAL for `normal' calls, LCT_CONST for `const'
+ calls, LCT_PURE for `pure' calls, LCT_CONST_MAKE_BLOCK for `const' calls
+ which should be enclosed in REG_LIBCALL/REG_RETVAL notes,
+ LCT_PURE_MAKE_BLOCK for `purep' calls which should be enclosed in
+ REG_LIBCALL/REG_RETVAL notes with extra (use (memory (scratch)),
+ or other LCT_ value for other types of library calls. */
void
-emit_library_call VPARAMS((rtx orgfun, int fn_type, enum machine_mode outmode,
- int nargs, ...))
+emit_library_call VPARAMS((rtx orgfun, enum libcall_type fn_type,
+ enum machine_mode outmode, int nargs, ...))
{
-#ifndef ANSI_PROTOTYPES
- rtx orgfun;
- int fn_type;
- enum machine_mode outmode;
- int nargs;
-#endif
- va_list p;
-
- VA_START (p, nargs);
-
-#ifndef ANSI_PROTOTYPES
- orgfun = va_arg (p, rtx);
- fn_type = va_arg (p, int);
- outmode = va_arg (p, enum machine_mode);
- nargs = va_arg (p, int);
-#endif
+ VA_OPEN (p, nargs);
+ VA_FIXEDARG (p, rtx, orgfun);
+ VA_FIXEDARG (p, int, fn_type);
+ VA_FIXEDARG (p, enum machine_mode, outmode);
+ VA_FIXEDARG (p, int, nargs);
emit_library_call_value_1 (0, orgfun, NULL_RTX, fn_type, outmode, nargs, p);
- va_end (p);
+ VA_CLOSE (p);
}
\f
/* Like emit_library_call except that an extra argument, VALUE,
If VALUE is nonzero, VALUE is returned. */
rtx
-emit_library_call_value VPARAMS((rtx orgfun, rtx value, int fn_type,
+emit_library_call_value VPARAMS((rtx orgfun, rtx value,
+ enum libcall_type fn_type,
enum machine_mode outmode, int nargs, ...))
{
-#ifndef ANSI_PROTOTYPES
- rtx orgfun;
- rtx value;
- int fn_type;
- enum machine_mode outmode;
- int nargs;
-#endif
- va_list p;
-
- VA_START (p, nargs);
-
-#ifndef ANSI_PROTOTYPES
- orgfun = va_arg (p, rtx);
- value = va_arg (p, rtx);
- fn_type = va_arg (p, int);
- outmode = va_arg (p, enum machine_mode);
- nargs = va_arg (p, int);
-#endif
-
- value = emit_library_call_value_1 (1, orgfun, value, fn_type, outmode, nargs, p);
-
- va_end (p);
-
- return value;
-}
-\f
-#if 0
-/* Return an rtx which represents a suitable home on the stack
- given TYPE, the type of the argument looking for a home.
- This is called only for BLKmode arguments.
+ rtx result;
+
+ VA_OPEN (p, nargs);
+ VA_FIXEDARG (p, rtx, orgfun);
+ VA_FIXEDARG (p, rtx, value);
+ VA_FIXEDARG (p, int, fn_type);
+ VA_FIXEDARG (p, enum machine_mode, outmode);
+ VA_FIXEDARG (p, int, nargs);
- SIZE is the size needed for this target.
- ARGS_ADDR is the address of the bottom of the argument block for this call.
- OFFSET describes this parameter's offset into ARGS_ADDR. It is meaningless
- if this machine uses push insns. */
+ result = emit_library_call_value_1 (1, orgfun, value, fn_type, outmode,
+ nargs, p);
-static rtx
-target_for_arg (type, size, args_addr, offset)
- tree type;
- rtx size;
- rtx args_addr;
- struct args_size offset;
-{
- rtx target;
- rtx offset_rtx = ARGS_SIZE_RTX (offset);
-
- /* We do not call memory_address if possible,
- because we want to address as close to the stack
- as possible. For non-variable sized arguments,
- this will be stack-pointer relative addressing. */
- if (GET_CODE (offset_rtx) == CONST_INT)
- target = plus_constant (args_addr, INTVAL (offset_rtx));
- else
- {
- /* I have no idea how to guarantee that this
- will work in the presence of register parameters. */
- target = gen_rtx_PLUS (Pmode, args_addr, offset_rtx);
- target = memory_address (QImode, target);
- }
+ VA_CLOSE (p);
- return gen_rtx_MEM (BLKmode, target);
+ return result;
}
-#endif
\f
/* Store a single argument for a function call
into the register or memory area where it must be passed.
or 0 on a machine where arguments are pushed individually.
MAY_BE_ALLOCA nonzero says this could be a call to `alloca'
- so must be careful about how the stack is used.
+ so must be careful about how the stack is used.
VARIABLE_SIZE nonzero says that this was a variable-sized outgoing
argument stack. This is used if ACCUMULATE_OUTGOING_ARGS to indicate
that we need not worry about saving and restoring the stack.
FNDECL is the declaration of the function we are calling.
-
+
Return non-zero if this arg should cause sibcall failure,
zero otherwise. */
static int
-store_one_arg (arg, argblock, flags, variable_size,
- reg_parm_stack_space)
+store_one_arg (arg, argblock, flags, variable_size, reg_parm_stack_space)
struct arg_data *arg;
rtx argblock;
int flags;
int variable_size ATTRIBUTE_UNUSED;
int reg_parm_stack_space;
{
- register tree pval = arg->tree_value;
+ tree pval = arg->tree_value;
rtx reg = 0;
int partial = 0;
int used = 0;
if (save_mode == BLKmode)
{
- arg->save_area = assign_stack_temp (BLKmode,
- arg->size.constant, 0);
- MEM_SET_IN_STRUCT_P (arg->save_area,
- AGGREGATE_TYPE_P (TREE_TYPE
- (arg->tree_value)));
+ tree ot = TREE_TYPE (arg->tree_value);
+ tree nt = build_qualified_type (ot, (TYPE_QUALS (ot)
+ | TYPE_QUAL_CONST));
+
+ arg->save_area = assign_temp (nt, 0, 1, 1);
preserve_temp_slots (arg->save_area);
emit_block_move (validize_mem (arg->save_area), stack_area,
- GEN_INT (arg->size.constant),
- PARM_BOUNDARY);
+ expr_size (arg->tree_value));
}
else
{
if (reg != 0 && partial == 0)
/* Being passed entirely in a register. We shouldn't be called in
- this case. */
+ this case. */
abort ();
/* If this arg needs special alignment, don't load the registers
here. */
if (arg->n_aligned_regs != 0)
reg = 0;
-
+
/* If this is being passed partially in a register, we can't evaluate
it directly into its stack slot. Otherwise, we can. */
if (arg->value == 0)
do_pending_stack_adjust ();
if (arg->value == arg->stack)
- {
- /* If the value is already in the stack slot, we are done. */
- if (current_function_check_memory_usage && GET_CODE (arg->stack) == MEM)
- {
- emit_library_call (chkr_set_right_libfunc, 1, VOIDmode, 3,
- XEXP (arg->stack, 0), Pmode,
- ARGS_SIZE_RTX (arg->size),
- TYPE_MODE (sizetype),
- GEN_INT (MEMORY_USE_RW),
- TYPE_MODE (integer_type_node));
- }
- }
+ /* If the value is already in the stack slot, we are done. */
+ ;
else if (arg->mode != BLKmode)
{
- register int size;
+ int size;
/* Argument is a scalar, not entirely passed in registers.
(If part is passed in registers, arg->partial says how much
and emit_push_insn will take care of putting it there.)
-
+
Push it, and if its size is less than the
amount of space allocated to it,
also bump stack pointer by the additional space.
{
/* BLKmode, at least partly to be pushed. */
- register int excess;
+ int excess;
rtx size_rtx;
/* Pushing a nonscalar.
}
}
+ /* Special handling is required if part of the parameter lies in the
+ register parameter area. The argument may be copied into the stack
+ slot using memcpy(), but the original contents of the register
+ parameter area will be restored after the memcpy() call.
+
+ To ensure that the part that lies in the register parameter area
+ is copied correctly, we emit a separate push for that part. This
+ push should be small enough to avoid a call to memcpy(). */
+#ifndef STACK_PARMS_IN_REG_PARM_AREA
+ if (arg->reg && arg->pass_on_stack)
+#else
+ if (1)
+#endif
+ {
+ if (arg->offset.constant < reg_parm_stack_space && arg->offset.var)
+ error ("variable offset is passed partially in stack and in reg");
+ else if (arg->offset.constant < reg_parm_stack_space && arg->size.var)
+ error ("variable size is passed partially in stack and in reg");
+ else if (arg->offset.constant < reg_parm_stack_space
+ && ((arg->offset.constant + arg->size.constant)
+ > reg_parm_stack_space))
+ {
+ rtx size_rtx1 = GEN_INT (reg_parm_stack_space - arg->offset.constant);
+ emit_push_insn (arg->value, arg->mode, TREE_TYPE (pval), size_rtx1,
+ TYPE_ALIGN (TREE_TYPE (pval)), partial, reg,
+ excess, argblock, ARGS_SIZE_RTX (arg->offset),
+ reg_parm_stack_space,
+ ARGS_SIZE_RTX (arg->alignment_pad));
+ }
+ }
+
+
emit_push_insn (arg->value, arg->mode, TREE_TYPE (pval), size_rtx,
TYPE_ALIGN (TREE_TYPE (pval)), partial, reg, excess,
argblock, ARGS_SIZE_RTX (arg->offset),
ARGS_SIZE_RTX (arg->alignment_pad));
}
-
/* Unless this is a partially-in-register argument, the argument is now
- in the stack.
+ in the stack.
??? Note that this can change arg->value from arg->stack to
arg->stack_slot and it matters when they are not the same.
OSDN Git Service
