/* Save and restore call-clobbered registers which are live across a call.
Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998,
- 1999, 2000, 2001 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "rtl.h"
+#include "regs.h"
#include "insn-config.h"
#include "flags.h"
-#include "regs.h"
#include "hard-reg-set.h"
#include "recog.h"
#include "basic-block.h"
#include "reload.h"
#include "function.h"
#include "expr.h"
-#include "optabs.h"
#include "toplev.h"
#include "tm_p.h"
register because it is live we first try to save in multi-register modes.
If that is not possible the save is done one register at a time. */
-static enum machine_mode
+static enum machine_mode
regno_save_mode[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
/* For each hard register, a place on the stack where it can be saved,
if needed. */
-static rtx
+static rtx
regno_save_mem[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
/* We will only make a register eligible for caller-save if it can be
when we emit them, the addresses might not be valid, so they might not
be recognized. */
-static enum insn_code
+static int
reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
-static enum insn_code
+static int
reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
/* Set of hard regs currently residing in save area (during insn scan). */
insn. */
static HARD_REG_SET referenced_regs;
-/* Computed in mark_set_regs, holds all registers set by the current
- instruction. */
-static HARD_REG_SET this_insn_sets;
-
-
-static void mark_set_regs PARAMS ((rtx, rtx, void *));
-static void mark_referenced_regs PARAMS ((rtx));
-static int insert_save PARAMS ((struct insn_chain *, int, int,
- HARD_REG_SET *,
- enum machine_mode *));
-static int insert_restore PARAMS ((struct insn_chain *, int, int,
- int, enum machine_mode *));
-static struct insn_chain *insert_one_insn PARAMS ((struct insn_chain *, int,
- enum insn_code, rtx));
-static void add_stored_regs PARAMS ((rtx, rtx, void *));
+
+static void mark_set_regs (rtx, rtx, void *);
+static void mark_referenced_regs (rtx);
+static int insert_save (struct insn_chain *, int, int, HARD_REG_SET *,
+ enum machine_mode *);
+static int insert_restore (struct insn_chain *, int, int, int,
+ enum machine_mode *);
+static struct insn_chain *insert_one_insn (struct insn_chain *, int, int,
+ rtx);
+static void add_stored_regs (rtx, rtx, void *);
\f
/* Initialize for caller-save.
Look at all the hard registers that are used by a call and for which
regclass.c has not already excluded from being used across a call.
- Ensure that we can find a mode to save the register and that there is a
+ Ensure that we can find a mode to save the register and that there is a
simple insn to save and restore the register. This latter check avoids
problems that would occur if we tried to save the MQ register of some
machines directly into memory. */
void
-init_caller_save ()
+init_caller_save (void)
{
rtx addr_reg;
int offset;
rtx address;
int i, j;
enum machine_mode mode;
+ rtx savepat, restpat;
+ rtx test_reg, test_mem;
+ rtx saveinsn, restinsn;
/* First find all the registers that we need to deal with and all
the modes that they can have. If we can't find a mode to use,
that register in every mode we will use to save registers. */
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (reg_class_contents[(int) BASE_REG_CLASS], i))
+ if (TEST_HARD_REG_BIT
+ (reg_class_contents
+ [(int) MODE_BASE_REG_CLASS (regno_save_mode [i][1])], i))
break;
- if (i == FIRST_PSEUDO_REGISTER)
- abort ();
+ gcc_assert (i < FIRST_PSEUDO_REGISTER);
addr_reg = gen_rtx_REG (Pmode, i);
address = addr_reg;
/* Next we try to form an insn to save and restore the register. We
- see if such an insn is recognized and meets its constraints. */
+ see if such an insn is recognized and meets its constraints.
+
+ To avoid lots of unnecessary RTL allocation, we construct all the RTL
+ once, then modify the memory and register operands in-place. */
- start_sequence ();
+ test_reg = gen_rtx_REG (VOIDmode, 0);
+ test_mem = gen_rtx_MEM (VOIDmode, address);
+ savepat = gen_rtx_SET (VOIDmode, test_mem, test_reg);
+ restpat = gen_rtx_SET (VOIDmode, test_reg, test_mem);
+
+ saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, savepat, -1, 0, 0);
+ restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, restpat, -1, 0, 0);
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (mode = 0 ; mode < MAX_MACHINE_MODE; mode++)
if (HARD_REGNO_MODE_OK (i, mode))
{
- rtx mem = gen_rtx_MEM (mode, address);
- rtx reg = gen_rtx_REG (mode, i);
- rtx savepat = gen_rtx_SET (VOIDmode, mem, reg);
- rtx restpat = gen_rtx_SET (VOIDmode, reg, mem);
- rtx saveinsn = emit_insn (savepat);
- rtx restinsn = emit_insn (restpat);
int ok;
+ /* Update the register number and modes of the register
+ and memory operand. */
+ REGNO (test_reg) = i;
+ PUT_MODE (test_reg, mode);
+ PUT_MODE (test_mem, mode);
+
+ /* Force re-recognition of the modified insns. */
+ INSN_CODE (saveinsn) = -1;
+ INSN_CODE (restinsn) = -1;
+
reg_save_code[i][mode] = recog_memoized (saveinsn);
reg_restore_code[i][mode] = recog_memoized (restinsn);
/* Now extract both insns and see if we can meet their
constraints. */
- ok = (reg_save_code[i][mode] != (enum insn_code)-1
- && reg_restore_code[i][mode] != (enum insn_code)-1);
+ ok = (reg_save_code[i][mode] != -1
+ && reg_restore_code[i][mode] != -1);
if (ok)
{
extract_insn (saveinsn);
if (! ok)
{
- reg_save_code[i][mode] = (enum insn_code) -1;
- reg_restore_code[i][mode] = (enum insn_code) -1;
+ reg_save_code[i][mode] = -1;
+ reg_restore_code[i][mode] = -1;
}
}
else
{
- reg_save_code[i][mode] = (enum insn_code) -1;
- reg_restore_code[i][mode] = (enum insn_code) -1;
+ reg_save_code[i][mode] = -1;
+ reg_restore_code[i][mode] = -1;
}
+
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 1; j <= MOVE_MAX_WORDS; j++)
- if (reg_save_code [i][regno_save_mode[i][j]] == (enum insn_code) -1)
+ if (reg_save_code [i][regno_save_mode[i][j]] == -1)
{
regno_save_mode[i][j] = VOIDmode;
if (j == 1)
SET_HARD_REG_BIT (call_fixed_reg_set, i);
}
}
-
- end_sequence ();
}
\f
/* Initialize save areas by showing that we haven't allocated any yet. */
void
-init_save_areas ()
+init_save_areas (void)
{
int i, j;
Future work:
In the fallback case we should iterate backwards across all possible
- modes for the save, choosing the largest available one instead of
+ modes for the save, choosing the largest available one instead of
falling back to the smallest mode immediately. (eg TF -> DF -> SF).
We do not try to use "move multiple" instructions that exist
- on some machines (such as the 68k moveml). It could be a win to try
+ on some machines (such as the 68k moveml). It could be a win to try
and use them when possible. The hard part is doing it in a way that is
- machine independent since they might be saving non-consecutive
+ machine independent since they might be saving non-consecutive
registers. (imagine caller-saving d0,d1,a0,a1 on the 68k) */
void
-setup_save_areas ()
+setup_save_areas (void)
{
int i, j, k;
unsigned int r;
if (reg_renumber[i] >= 0 && REG_N_CALLS_CROSSED (i) > 0)
{
unsigned int regno = reg_renumber[i];
- unsigned int endregno
- = regno + HARD_REGNO_NREGS (regno, GET_MODE (regno_reg_rtx[i]));
+ unsigned int endregno
+ = regno + hard_regno_nregs[regno][GET_MODE (regno_reg_rtx[i])];
for (r = regno; r < endregno; r++)
if (call_used_regs[r])
/* Find the places where hard regs are live across calls and save them. */
void
-save_call_clobbered_regs ()
+save_call_clobbered_regs (void)
{
struct insn_chain *chain, *next;
enum machine_mode save_mode [FIRST_PSEUDO_REGISTER];
+ /* Computed in mark_set_regs, holds all registers set by the current
+ instruction. */
+ HARD_REG_SET this_insn_sets;
+
CLEAR_HARD_REG_SET (hard_regs_saved);
n_regs_saved = 0;
next = chain->next;
- if (chain->is_caller_save_insn)
- abort ();
+ gcc_assert (!chain->is_caller_save_insn);
- if (GET_RTX_CLASS (code) == 'i')
+ if (INSN_P (insn))
{
/* If some registers have been saved, see if INSN references
any of them. We must restore them before the insn if so. */
regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS, save_mode);
}
- if (code == CALL_INSN)
+ if (code == CALL_INSN && ! find_reg_note (insn, REG_NORETURN, NULL))
{
- int regno;
+ unsigned regno;
HARD_REG_SET hard_regs_to_save;
+ reg_set_iterator rsi;
/* Use the register life information in CHAIN to compute which
regs are live during the call. */
REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
&chain->live_throughout);
- /* Save hard registers always in the widest mode availble. */
+ /* Save hard registers always in the widest mode available. */
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
save_mode [regno] = regno_save_mode [regno][1];
else
save_mode [regno] = VOIDmode;
- /* Look trought all live pseudos, mark their hard registers
+ /* Look through all live pseudos, mark their hard registers
and choose proper mode for saving. */
EXECUTE_IF_SET_IN_REG_SET
- (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno,
- {
- int r = reg_renumber[regno];
- int nregs;
-
- if (r >= 0)
- {
- enum machine_mode mode;
-
- nregs = HARD_REGNO_NREGS (r, PSEUDO_REGNO_MODE (regno));
- mode = HARD_REGNO_CALLER_SAVE_MODE
- (r, nregs, PSEUDO_REGNO_MODE (regno));
- if (GET_MODE_BITSIZE (mode)
- > GET_MODE_BITSIZE (save_mode[r]))
- save_mode[r] = mode;
- while (nregs-- > 0)
- SET_HARD_REG_BIT (hard_regs_to_save, r + nregs);
- }
- else
- abort ();
- });
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
+ {
+ int r = reg_renumber[regno];
+ int nregs;
+ enum machine_mode mode;
+
+ gcc_assert (r >= 0);
+ nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ mode = HARD_REGNO_CALLER_SAVE_MODE
+ (r, nregs, PSEUDO_REGNO_MODE (regno));
+ if (GET_MODE_BITSIZE (mode)
+ > GET_MODE_BITSIZE (save_mode[r]))
+ save_mode[r] = mode;
+ while (nregs-- > 0)
+ SET_HARD_REG_BIT (hard_regs_to_save, r + nregs);
+ }
/* Record all registers set in this call insn. These don't need
to be saved. N.B. the call insn might set a subreg of a
multi-hard-reg pseudo; then the pseudo is considered live
during the call, but the subreg that is set isn't. */
CLEAR_HARD_REG_SET (this_insn_sets);
- note_stores (PATTERN (insn), mark_set_regs, NULL);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ /* Sibcalls are considered to set the return value,
+ compare flow.c:propagate_one_insn. */
+ if (SIBLING_CALL_P (insn) && current_function_return_rtx)
+ mark_set_regs (current_function_return_rtx, NULL_RTX,
+ &this_insn_sets);
/* Compute which hard regs must be saved before this call. */
AND_COMPL_HARD_REG_SET (hard_regs_to_save, call_fixed_reg_set);
if (n_regs_saved)
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
- regno += insert_restore (chain, GET_CODE (insn) == JUMP_INSN,
+ regno += insert_restore (chain, JUMP_P (insn),
regno, MOVE_MAX_WORDS, save_mode);
}
- }
+ }
}
-/* Here from note_stores when an insn stores a value in a register.
+/* Here from note_stores, or directly from save_call_clobbered_regs, when
+ an insn stores a value in a register.
Set the proper bit or bits in this_insn_sets. All pseudos that have
been assigned hard regs have had their register number changed already,
so we can ignore pseudos. */
static void
-mark_set_regs (reg, setter, data)
- rtx reg;
- rtx setter ATTRIBUTE_UNUSED;
- void *data ATTRIBUTE_UNUSED;
+mark_set_regs (rtx reg, rtx setter ATTRIBUTE_UNUSED, void *data)
{
- register int regno, endregno, i;
+ int regno, endregno, i;
enum machine_mode mode = GET_MODE (reg);
+ HARD_REG_SET *this_insn_sets = data;
if (GET_CODE (reg) == SUBREG)
{
rtx inner = SUBREG_REG (reg);
- if (GET_CODE (inner) != REG || REGNO (inner) >= FIRST_PSEUDO_REGISTER)
+ if (!REG_P (inner) || REGNO (inner) >= FIRST_PSEUDO_REGISTER)
return;
-
- regno = subreg_hard_regno (reg, 1);
+ regno = subreg_regno (reg);
}
- else if (GET_CODE (reg) == REG
+ else if (REG_P (reg)
&& REGNO (reg) < FIRST_PSEUDO_REGISTER)
regno = REGNO (reg);
else
return;
- endregno = regno + HARD_REGNO_NREGS (regno, mode);
+ endregno = regno + hard_regno_nregs[regno][mode];
for (i = regno; i < endregno; i++)
- SET_HARD_REG_BIT (this_insn_sets, i);
+ SET_HARD_REG_BIT (*this_insn_sets, i);
}
/* Here from note_stores when an insn stores a value in a register.
been assigned hard regs have had their register number changed already,
so we can ignore pseudos. */
static void
-add_stored_regs (reg, setter, data)
- rtx reg;
- rtx setter;
- void *data;
+add_stored_regs (rtx reg, rtx setter, void *data)
{
- register int regno, endregno, i;
+ int regno, endregno, i;
enum machine_mode mode = GET_MODE (reg);
int offset = 0;
if (GET_CODE (setter) == CLOBBER)
return;
- if (GET_CODE (reg) == SUBREG && GET_CODE (SUBREG_REG (reg)) == REG)
+ if (GET_CODE (reg) == SUBREG && REG_P (SUBREG_REG (reg)))
{
offset = subreg_regno_offset (REGNO (SUBREG_REG (reg)),
GET_MODE (SUBREG_REG (reg)),
reg = SUBREG_REG (reg);
}
- if (GET_CODE (reg) != REG || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
+ if (!REG_P (reg) || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
return;
regno = REGNO (reg) + offset;
- endregno = regno + HARD_REGNO_NREGS (regno, mode);
+ endregno = regno + hard_regno_nregs[regno][mode];
for (i = regno; i < endregno; i++)
SET_REGNO_REG_SET ((regset) data, i);
/* Walk X and record all referenced registers in REFERENCED_REGS. */
static void
-mark_referenced_regs (x)
- rtx x;
+mark_referenced_regs (rtx x)
{
enum rtx_code code = GET_CODE (x);
const char *fmt;
{
x = SET_DEST (x);
code = GET_CODE (x);
- if (code == REG || code == PC || code == CC0
- || (code == SUBREG && GET_CODE (SUBREG_REG (x)) == REG
+ if ((code == REG && REGNO (x) < FIRST_PSEUDO_REGISTER)
+ || code == PC || code == CC0
+ || (code == SUBREG && REG_P (SUBREG_REG (x))
+ && REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER
/* If we're setting only part of a multi-word register,
we shall mark it as referenced, because the words
that are not being set should be restored. */
if (hardregno >= 0)
{
- int nregs = HARD_REGNO_NREGS (hardregno, GET_MODE (x));
+ int nregs = hard_regno_nregs[hardregno][GET_MODE (x)];
while (nregs-- > 0)
SET_HARD_REG_BIT (referenced_regs, hardregno + nregs);
}
Return the extra number of registers saved. */
static int
-insert_restore (chain, before_p, regno, maxrestore, save_mode)
- struct insn_chain *chain;
- int before_p;
- int regno;
- int maxrestore;
- enum machine_mode *save_mode;
+insert_restore (struct insn_chain *chain, int before_p, int regno,
+ int maxrestore, enum machine_mode *save_mode)
{
int i, k;
rtx pat = NULL_RTX;
- enum insn_code code = CODE_FOR_nothing;
+ int code;
unsigned int numregs = 0;
struct insn_chain *new;
rtx mem;
- /* A common failure mode if register status is not correct in the RTL
- is for this routine to be called with a REGNO we didn't expect to
- save. That will cause us to write an insn with a (nil) SET_DEST
- or SET_SRC. Instead of doing so and causing a crash later, check
- for this common case and abort here instead. This will remove one
- step in debugging such problems. */
-
- if (regno_save_mem[regno][1] == 0)
- abort ();
+ /* A common failure mode if register status is not correct in the
+ RTL is for this routine to be called with a REGNO we didn't
+ expect to save. That will cause us to write an insn with a (nil)
+ SET_DEST or SET_SRC. Instead of doing so and causing a crash
+ later, check for this common case here instead. This will remove
+ one step in debugging such problems. */
+ gcc_assert (regno_save_mem[regno][1]);
/* Get the pattern to emit and update our status.
ok = 0;
break;
}
- /* Must do this one restore at a time */
+ /* Must do this one restore at a time. */
if (! ok)
continue;
mem = regno_save_mem [regno][numregs];
if (save_mode [regno] != VOIDmode
&& save_mode [regno] != GET_MODE (mem)
- && numregs == HARD_REGNO_NREGS (regno, save_mode [regno]))
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]])
mem = adjust_address (mem, save_mode[regno], 0);
+ else
+ mem = copy_rtx (mem);
pat = gen_rtx_SET (VOIDmode,
- gen_rtx_REG (GET_MODE (mem),
+ gen_rtx_REG (GET_MODE (mem),
regno), mem);
code = reg_restore_code[regno][GET_MODE (mem)];
new = insert_one_insn (chain, before_p, code, pat);
n_regs_saved--;
}
-
-
- /* Tell our callers how many extra registers we saved/restored */
+ /* Tell our callers how many extra registers we saved/restored. */
return numregs - 1;
}
/* Like insert_restore above, but save registers instead. */
+
static int
-insert_save (chain, before_p, regno, to_save, save_mode)
- struct insn_chain *chain;
- int before_p;
- int regno;
- HARD_REG_SET *to_save;
- enum machine_mode *save_mode;
+insert_save (struct insn_chain *chain, int before_p, int regno,
+ HARD_REG_SET (*to_save), enum machine_mode *save_mode)
{
int i;
unsigned int k;
rtx pat = NULL_RTX;
- enum insn_code code = CODE_FOR_nothing;
+ int code;
unsigned int numregs = 0;
struct insn_chain *new;
rtx mem;
- /* A common failure mode if register status is not correct in the RTL
- is for this routine to be called with a REGNO we didn't expect to
- save. That will cause us to write an insn with a (nil) SET_DEST
- or SET_SRC. Instead of doing so and causing a crash later, check
- for this common case and abort here instead. This will remove one
+ /* A common failure mode if register status is not correct in the
+ RTL is for this routine to be called with a REGNO we didn't
+ expect to save. That will cause us to write an insn with a (nil)
+ SET_DEST or SET_SRC. Instead of doing so and causing a crash
+ later, check for this common case here. This will remove one
step in debugging such problems. */
-
- if (regno_save_mem[regno][1] == 0)
- abort ();
+ gcc_assert (regno_save_mem[regno][1]);
/* Get the pattern to emit and update our status.
- See if we can save several registers with a single instruction.
+ See if we can save several registers with a single instruction.
Work backwards to the single register case. */
for (i = MOVE_MAX_WORDS; i > 0; i--)
{
ok = 0;
break;
}
- /* Must do this one save at a time */
+ /* Must do this one save at a time. */
if (! ok)
continue;
mem = regno_save_mem [regno][numregs];
if (save_mode [regno] != VOIDmode
&& save_mode [regno] != GET_MODE (mem)
- && numregs == HARD_REGNO_NREGS (regno, save_mode [regno]))
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]])
mem = adjust_address (mem, save_mode[regno], 0);
+ else
+ mem = copy_rtx (mem);
pat = gen_rtx_SET (VOIDmode, mem,
gen_rtx_REG (GET_MODE (mem),
regno));
n_regs_saved++;
}
- /* Tell our callers how many extra registers we saved/restored */
+ /* Tell our callers how many extra registers we saved/restored. */
return numregs - 1;
}
/* Emit a new caller-save insn and set the code. */
static struct insn_chain *
-insert_one_insn (chain, before_p, code, pat)
- struct insn_chain *chain;
- int before_p;
- enum insn_code code;
- rtx pat;
+insert_one_insn (struct insn_chain *chain, int before_p, int code, rtx pat)
{
rtx insn = chain->insn;
struct insn_chain *new;
-
+
#ifdef HAVE_cc0
/* If INSN references CC0, put our insns in front of the insn that sets
CC0. This is always safe, since the only way we could be passed an
isn't a problem. We do, however, assume here that CALL_INSNs don't
reference CC0. Guard against non-INSN's like CODE_LABEL. */
- if ((GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN)
+ if ((NONJUMP_INSN_P (insn) || JUMP_P (insn))
&& before_p
&& reg_referenced_p (cc0_rtx, PATTERN (insn)))
chain = chain->prev, insn = chain->insn;
rtx reg = XEXP (link, 0);
int regno, i;
- if (GET_CODE (reg) != REG)
- abort ();
-
+ gcc_assert (REG_P (reg));
regno = REGNO (reg);
if (regno >= FIRST_PSEUDO_REGISTER)
regno = reg_renumber[regno];
if (regno < 0)
continue;
- for (i = HARD_REGNO_NREGS (regno, GET_MODE (reg)) - 1;
+ for (i = hard_regno_nregs[regno][GET_MODE (reg)] - 1;
i >= 0; i--)
SET_REGNO_REG_SET (&new->live_throughout, regno + i);
}
}
CLEAR_REG_SET (&new->dead_or_set);
- if (chain->insn == BLOCK_HEAD (chain->block))
- BLOCK_HEAD (chain->block) = new->insn;
+ if (chain->insn == BB_HEAD (BASIC_BLOCK (chain->block)))
+ BB_HEAD (BASIC_BLOCK (chain->block)) = new->insn;
}
else
{
note_stores (PATTERN (chain->insn), add_stored_regs,
&new->live_throughout);
CLEAR_REG_SET (&new->dead_or_set);
- if (chain->insn == BLOCK_END (chain->block))
- BLOCK_END (chain->block) = new->insn;
+ if (chain->insn == BB_END (BASIC_BLOCK (chain->block)))
+ BB_END (BASIC_BLOCK (chain->block)) = new->insn;
}
new->block = chain->block;
new->is_caller_save_insn = 1;
OSDN Git Service
