OSDN Git Service

2010-04-26 Jack Howarth <howarth@bromo.med.uc.edu>
[pf3gnuchains/gcc-fork.git] / gcc / caller-save.c
index 377ffad..6bcfd4b 100644 (file)
@@ -1,6 +1,6 @@
 /* Save and restore call-clobbered registers which are live across a call.
    Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
-   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
    Free Software Foundation, Inc.
 
 This file is part of GCC.
@@ -30,6 +30,7 @@ along with GCC; see the file COPYING3.  If not see
 #include "hard-reg-set.h"
 #include "recog.h"
 #include "basic-block.h"
+#include "df.h"
 #include "reload.h"
 #include "function.h"
 #include "expr.h"
@@ -37,9 +38,11 @@ along with GCC; see the file COPYING3.  If not see
 #include "tm_p.h"
 #include "addresses.h"
 #include "output.h"
-#include "df.h"
 #include "ggc.h"
 
+/* True if caller-save has been initialized.  */
+bool caller_save_initialized_p;
+
 /* Call used hard registers which can not be saved because there is no
    insn for this.  */
 HARD_REG_SET no_caller_save_reg_set;
@@ -208,6 +211,11 @@ init_caller_save (void)
   rtx address;
   int i, j;
 
+  if (caller_save_initialized_p)
+    return;
+
+  caller_save_initialized_p = true;
+
   CLEAR_HARD_REG_SET (no_caller_save_reg_set);
   /* First find all the registers that we need to deal with and all
      the modes that they can have.  If we can't find a mode to use,
@@ -311,7 +319,7 @@ init_save_areas (void)
     for (j = 1; j <= MOVE_MAX_WORDS; j++)
       regno_save_mem[i][j] = 0;
   save_slots_num = 0;
-    
+
 }
 
 /* The structure represents a hard register which should be saved
@@ -394,7 +402,7 @@ saved_hard_reg_compare_func (const void *v1p, const void *v2p)
 {
   const struct saved_hard_reg *p1 = *(struct saved_hard_reg * const *) v1p;
   const struct saved_hard_reg *p2 = *(struct saved_hard_reg * const *) v2p;
-  
+
   if (flag_omit_frame_pointer)
     {
       if (p1->call_freq - p2->call_freq != 0)
@@ -467,7 +475,7 @@ setup_save_areas (void)
       int best_slot_num;
       int prev_save_slots_num;
       rtx prev_save_slots[FIRST_PSEUDO_REGISTER];
-      
+
       initiate_saved_hard_regs ();
       /* Create hard reg saved regs.  */
       for (chain = reload_insn_chain; chain != 0; chain = next)
@@ -510,10 +518,10 @@ setup_save_areas (void)
            {
              int r = reg_renumber[regno];
              int bound;
-             
+
              if (r < 0)
                continue;
-             
+
              bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
              for (; r < bound; r++)
                if (TEST_HARD_REG_BIT (used_regs, r))
@@ -549,7 +557,7 @@ setup_save_areas (void)
          CLEAR_HARD_REG_SET (this_insn_sets);
          note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
          /* Sibcalls are considered to set the return value,
-            compare flow.c:propagate_one_insn.  */
+            compare df-scan.c:df_get_call_refs.  */
          if (SIBLING_CALL_P (insn) && crtl->return_rtx)
            mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets);
 
@@ -568,7 +576,7 @@ setup_save_areas (void)
            {
              int r = reg_renumber[regno];
              int bound;
-             
+
              if (r < 0)
                continue;
 
@@ -686,17 +694,17 @@ setup_save_areas (void)
       /* Now run through all the call-used hard-registers and allocate
         space for them in the caller-save area.  Try to allocate space
         in a manner which allows multi-register saves/restores to be done.  */
-      
+
       for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
        for (j = MOVE_MAX_WORDS; j > 0; j--)
          {
            int do_save = 1;
-           
+
            /* If no mode exists for this size, try another.  Also break out
               if we have already saved this hard register.  */
            if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0)
              continue;
-           
+
            /* See if any register in this group has been saved.  */
            for (k = 0; k < j; k++)
              if (regno_save_mem[i + k][1])
@@ -706,7 +714,7 @@ setup_save_areas (void)
                }
            if (! do_save)
              continue;
-           
+
            for (k = 0; k < j; k++)
              if (! TEST_HARD_REG_BIT (hard_regs_used, i + k))
                {
@@ -715,7 +723,7 @@ setup_save_areas (void)
                }
            if (! do_save)
              continue;
-           
+
            /* We have found an acceptable mode to store in.  Since
               hard register is always saved in the widest mode
               available, the mode may be wider than necessary, it is
@@ -727,7 +735,7 @@ setup_save_areas (void)
              = assign_stack_local_1 (regno_save_mode[i][j],
                                      GET_MODE_SIZE (regno_save_mode[i][j]),
                                      0, true);
-           
+
            /* Setup single word save area just in case...  */
            for (k = 0; k < j; k++)
              /* This should not depend on WORDS_BIG_ENDIAN.
@@ -754,7 +762,7 @@ setup_save_areas (void)
 void
 save_call_clobbered_regs (void)
 {
-  struct insn_chain *chain, *next;
+  struct insn_chain *chain, *next, *last = NULL;
   enum machine_mode save_mode [FIRST_PSEUDO_REGISTER];
 
   /* Computed in mark_set_regs, holds all registers set by the current
@@ -861,6 +869,7 @@ save_call_clobbered_regs (void)
                if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
                  n_regs_saved++;
            }
+          last = chain;
        }
       else if (DEBUG_INSN_P (insn) && n_regs_saved)
        mark_referenced_regs (&PATTERN (insn),
@@ -874,6 +883,36 @@ save_call_clobbered_regs (void)
             remain saved.  If the last insn in the block is a JUMP_INSN, put
             the restore before the insn, otherwise, put it after the insn.  */
 
+         if (DEBUG_INSN_P (insn) && last && last->block == chain->block)
+           {
+             rtx ins, prev;
+             basic_block bb = BLOCK_FOR_INSN (insn);
+
+             /* When adding hard reg restores after a DEBUG_INSN, move
+                all notes between last real insn and this DEBUG_INSN after
+                the DEBUG_INSN, otherwise we could get code
+                -g/-g0 differences.  */
+             for (ins = PREV_INSN (insn); ins != last->insn; ins = prev)
+               {
+                 prev = PREV_INSN (ins);
+                 if (NOTE_P (ins))
+                   {
+                     NEXT_INSN (prev) = NEXT_INSN (ins);
+                     PREV_INSN (NEXT_INSN (ins)) = prev;
+                     PREV_INSN (ins) = insn;
+                     NEXT_INSN (ins) = NEXT_INSN (insn);
+                     NEXT_INSN (insn) = ins;
+                     if (NEXT_INSN (ins))
+                       PREV_INSN (NEXT_INSN (ins)) = ins;
+                      if (BB_END (bb) == insn)
+                       BB_END (bb) = ins;
+                   }
+                 else
+                   gcc_assert (DEBUG_INSN_P (ins));
+               }
+           }
+         last = NULL;
+
          if (n_regs_saved)
            for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
              if (TEST_HARD_REG_BIT (hard_regs_saved, regno))