/* Save and restore call-clobbered registers which are live across a call.
- Copyright (C) 1989, 1992, 94-95, 1997, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
+ 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 3, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "rtl.h"
+#include "regs.h"
#include "insn-config.h"
#include "flags.h"
-#include "regs.h"
#include "hard-reg-set.h"
#include "recog.h"
#include "basic-block.h"
+#include "df.h"
#include "reload.h"
+#include "function.h"
#include "expr.h"
#include "toplev.h"
+#include "tm_p.h"
+#include "addresses.h"
+#include "output.h"
+#include "ggc.h"
+
+/* True if caller-save has been initialized. */
+bool caller_save_initialized_p;
+
+/* Call used hard registers which can not be saved because there is no
+ insn for this. */
+HARD_REG_SET no_caller_save_reg_set;
#ifndef MAX_MOVE_MAX
#define MAX_MOVE_MAX MOVE_MAX
#define MIN_UNITS_PER_WORD UNITS_PER_WORD
#endif
+#define MOVE_MAX_WORDS (MOVE_MAX / UNITS_PER_WORD)
+
/* Modes for each hard register that we can save. The smallest mode is wide
enough to save the entire contents of the register. When saving the
register because it is live we first try to save in multi-register modes.
If that is not possible the save is done one register at a time. */
-static enum machine_mode
+static enum machine_mode
regno_save_mode[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
/* For each hard register, a place on the stack where it can be saved,
if needed. */
-static rtx
+static rtx
regno_save_mem[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
+/* The number of elements in the subsequent array. */
+static int save_slots_num;
+
+/* Allocated slots so far. */
+static rtx save_slots[FIRST_PSEUDO_REGISTER];
+
/* We will only make a register eligible for caller-save if it can be
saved in its widest mode with a simple SET insn as long as the memory
address is valid. We record the INSN_CODE is those insns here since
when we emit them, the addresses might not be valid, so they might not
be recognized. */
-static enum insn_code
- reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
-static enum insn_code
- reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
-
-/* Set of hard regs currently live (during scan of all insns). */
-
-static HARD_REG_SET hard_regs_live;
+static int
+ cached_reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
+static int
+ cached_reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
/* Set of hard regs currently residing in save area (during insn scan). */
static HARD_REG_SET hard_regs_saved;
-/* Set of hard regs which need to be restored before referenced. */
+/* Number of registers currently in hard_regs_saved. */
-static HARD_REG_SET hard_regs_need_restore;
+static int n_regs_saved;
-/* Number of registers currently in hard_regs_saved. */
+/* Computed by mark_referenced_regs, all regs referenced in a given
+ insn. */
+static HARD_REG_SET referenced_regs;
+
+
+typedef void refmarker_fn (rtx *loc, enum machine_mode mode, int hardregno,
+ void *mark_arg);
+
+static int reg_save_code (int, enum machine_mode);
+static int reg_restore_code (int, enum machine_mode);
+
+struct saved_hard_reg;
+static void initiate_saved_hard_regs (void);
+static struct saved_hard_reg *new_saved_hard_reg (int, int);
+static void finish_saved_hard_regs (void);
+static int saved_hard_reg_compare_func (const void *, const void *);
+
+static void mark_set_regs (rtx, const_rtx, void *);
+static void mark_referenced_regs (rtx *, refmarker_fn *mark, void *mark_arg);
+static refmarker_fn mark_reg_as_referenced;
+static refmarker_fn replace_reg_with_saved_mem;
+static int insert_save (struct insn_chain *, int, int, HARD_REG_SET *,
+ enum machine_mode *);
+static int insert_restore (struct insn_chain *, int, int, int,
+ enum machine_mode *);
+static struct insn_chain *insert_one_insn (struct insn_chain *, int, int,
+ rtx);
+static void add_stored_regs (rtx, const_rtx, void *);
-int n_regs_saved;
+\f
+
+static GTY(()) rtx savepat;
+static GTY(()) rtx restpat;
+static GTY(()) rtx test_reg;
+static GTY(()) rtx test_mem;
+static GTY(()) rtx saveinsn;
+static GTY(()) rtx restinsn;
+
+/* Return the INSN_CODE used to save register REG in mode MODE. */
+static int
+reg_save_code (int reg, enum machine_mode mode)
+{
+ bool ok;
+ if (cached_reg_save_code[reg][mode])
+ return cached_reg_save_code[reg][mode];
+ if (!HARD_REGNO_MODE_OK (reg, mode))
+ {
+ cached_reg_save_code[reg][mode] = -1;
+ cached_reg_restore_code[reg][mode] = -1;
+ return -1;
+ }
+
+ /* Update the register number and modes of the register
+ and memory operand. */
+ SET_REGNO (test_reg, reg);
+ PUT_MODE (test_reg, mode);
+ PUT_MODE (test_mem, mode);
+
+ /* Force re-recognition of the modified insns. */
+ INSN_CODE (saveinsn) = -1;
+ INSN_CODE (restinsn) = -1;
+
+ cached_reg_save_code[reg][mode] = recog_memoized (saveinsn);
+ cached_reg_restore_code[reg][mode] = recog_memoized (restinsn);
+
+ /* Now extract both insns and see if we can meet their
+ constraints. */
+ ok = (cached_reg_save_code[reg][mode] != -1
+ && cached_reg_restore_code[reg][mode] != -1);
+ if (ok)
+ {
+ extract_insn (saveinsn);
+ ok = constrain_operands (1);
+ extract_insn (restinsn);
+ ok &= constrain_operands (1);
+ }
+
+ if (! ok)
+ {
+ cached_reg_save_code[reg][mode] = -1;
+ cached_reg_restore_code[reg][mode] = -1;
+ }
+ gcc_assert (cached_reg_save_code[reg][mode]);
+ return cached_reg_save_code[reg][mode];
+}
-static void set_reg_live PROTO((rtx, rtx));
-static void clear_reg_live PROTO((rtx));
-static void restore_referenced_regs PROTO((rtx, rtx, int));
-static int insert_restore PROTO((rtx, int, int, int, int));
-static int insert_save PROTO((rtx, int, int, int));
-static void insert_one_insn PROTO((rtx, int, enum rtx_code,
- rtx, int));
+/* Return the INSN_CODE used to restore register REG in mode MODE. */
+static int
+reg_restore_code (int reg, enum machine_mode mode)
+{
+ if (cached_reg_restore_code[reg][mode])
+ return cached_reg_restore_code[reg][mode];
+ /* Populate our cache. */
+ reg_save_code (reg, mode);
+ return cached_reg_restore_code[reg][mode];
+}
\f
/* Initialize for caller-save.
Look at all the hard registers that are used by a call and for which
- regclass.c has not already excluded from being used across a call.
+ reginfo.c has not already excluded from being used across a call.
- Ensure that we can find a mode to save the register and that there is a
+ Ensure that we can find a mode to save the register and that there is a
simple insn to save and restore the register. This latter check avoids
problems that would occur if we tried to save the MQ register of some
machines directly into memory. */
void
-init_caller_save ()
+init_caller_save (void)
{
- char *first_obj = (char *) oballoc (0);
rtx addr_reg;
int offset;
rtx address;
int i, j;
+ if (caller_save_initialized_p)
+ return;
+
+ caller_save_initialized_p = true;
+
+ CLEAR_HARD_REG_SET (no_caller_save_reg_set);
/* First find all the registers that we need to deal with and all
the modes that they can have. If we can't find a mode to use,
we can't have the register live over calls. */
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
- if (call_used_regs[i] && ! call_fixed_regs[i])
+ if (call_used_regs[i]
+ && !TEST_HARD_REG_BIT (call_fixed_reg_set, i))
{
- for (j = 1; j <= MOVE_MAX / UNITS_PER_WORD; j++)
+ for (j = 1; j <= MOVE_MAX_WORDS; j++)
{
- regno_save_mode[i][j] = HARD_REGNO_CALLER_SAVE_MODE (i, j);
+ regno_save_mode[i][j] = HARD_REGNO_CALLER_SAVE_MODE (i, j,
+ VOIDmode);
if (regno_save_mode[i][j] == VOIDmode && j == 1)
{
- call_fixed_regs[i] = 1;
SET_HARD_REG_BIT (call_fixed_reg_set, i);
}
}
that register in every mode we will use to save registers. */
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (reg_class_contents[(int) BASE_REG_CLASS], i))
+ if (TEST_HARD_REG_BIT
+ (reg_class_contents
+ [(int) base_reg_class (regno_save_mode[i][1], PLUS, CONST_INT)], i))
break;
- if (i == FIRST_PSEUDO_REGISTER)
- abort ();
+ gcc_assert (i < FIRST_PSEUDO_REGISTER);
addr_reg = gen_rtx_REG (Pmode, i);
address = addr_reg;
/* Next we try to form an insn to save and restore the register. We
- see if such an insn is recognized and meets its constraints. */
+ see if such an insn is recognized and meets its constraints.
- start_sequence ();
+ To avoid lots of unnecessary RTL allocation, we construct all the RTL
+ once, then modify the memory and register operands in-place. */
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- for (j = 1; j <= MOVE_MAX / UNITS_PER_WORD; j++)
- if (regno_save_mode[i][j] != VOIDmode)
- {
- rtx mem = gen_rtx_MEM (regno_save_mode[i][j], address);
- rtx reg = gen_rtx_REG (regno_save_mode[i][j], i);
- rtx savepat = gen_rtx_SET (VOIDmode, mem, reg);
- rtx restpat = gen_rtx_SET (VOIDmode, reg, mem);
- rtx saveinsn = emit_insn (savepat);
- rtx restinsn = emit_insn (restpat);
- int ok;
-
- reg_save_code[i][j] = recog_memoized (saveinsn);
- reg_restore_code[i][j] = recog_memoized (restinsn);
-
- /* Now extract both insns and see if we can meet their
- constraints. */
- ok = (reg_save_code[i][j] != -1 && reg_restore_code[i][j] != -1);
- if (ok)
- {
- insn_extract (saveinsn);
- ok = constrain_operands (reg_save_code[i][j], 1);
- insn_extract (restinsn);
- ok &= constrain_operands (reg_restore_code[i][j], 1);
- }
+ test_reg = gen_rtx_REG (VOIDmode, 0);
+ test_mem = gen_rtx_MEM (VOIDmode, address);
+ savepat = gen_rtx_SET (VOIDmode, test_mem, test_reg);
+ restpat = gen_rtx_SET (VOIDmode, test_reg, test_mem);
+
+ saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, savepat, -1, 0);
+ restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, restpat, -1, 0);
- if (! ok)
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ for (j = 1; j <= MOVE_MAX_WORDS; j++)
+ if (reg_save_code (i,regno_save_mode[i][j]) == -1)
+ {
+ regno_save_mode[i][j] = VOIDmode;
+ if (j == 1)
{
- regno_save_mode[i][j] = VOIDmode;
- if (j == 1)
- {
- call_fixed_regs[i] = 1;
- SET_HARD_REG_BIT (call_fixed_reg_set, i);
- }
+ SET_HARD_REG_BIT (call_fixed_reg_set, i);
+ if (call_used_regs[i])
+ SET_HARD_REG_BIT (no_caller_save_reg_set, i);
}
- }
-
- end_sequence ();
-
- obfree (first_obj);
+ }
}
+
\f
+
/* Initialize save areas by showing that we haven't allocated any yet. */
void
-init_save_areas ()
+init_save_areas (void)
{
int i, j;
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- for (j = 1; j <= MOVE_MAX / UNITS_PER_WORD; j++)
+ for (j = 1; j <= MOVE_MAX_WORDS; j++)
regno_save_mem[i][j] = 0;
+ save_slots_num = 0;
+
+}
+
+/* The structure represents a hard register which should be saved
+ through the call. It is used when the integrated register
+ allocator (IRA) is used and sharing save slots is on. */
+struct saved_hard_reg
+{
+ /* Order number starting with 0. */
+ int num;
+ /* The hard regno. */
+ int hard_regno;
+ /* Execution frequency of all calls through which given hard
+ register should be saved. */
+ int call_freq;
+ /* Stack slot reserved to save the hard register through calls. */
+ rtx slot;
+ /* True if it is first hard register in the chain of hard registers
+ sharing the same stack slot. */
+ int first_p;
+ /* Order number of the next hard register structure with the same
+ slot in the chain. -1 represents end of the chain. */
+ int next;
+};
+
+/* Map: hard register number to the corresponding structure. */
+static struct saved_hard_reg *hard_reg_map[FIRST_PSEUDO_REGISTER];
+
+/* The number of all structures representing hard registers should be
+ saved, in order words, the number of used elements in the following
+ array. */
+static int saved_regs_num;
+
+/* Pointers to all the structures. Index is the order number of the
+ corresponding structure. */
+static struct saved_hard_reg *all_saved_regs[FIRST_PSEUDO_REGISTER];
+
+/* First called function for work with saved hard registers. */
+static void
+initiate_saved_hard_regs (void)
+{
+ int i;
+
+ saved_regs_num = 0;
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ hard_reg_map[i] = NULL;
+}
+
+/* Allocate and return new saved hard register with given REGNO and
+ CALL_FREQ. */
+static struct saved_hard_reg *
+new_saved_hard_reg (int regno, int call_freq)
+{
+ struct saved_hard_reg *saved_reg;
+
+ saved_reg
+ = (struct saved_hard_reg *) xmalloc (sizeof (struct saved_hard_reg));
+ hard_reg_map[regno] = all_saved_regs[saved_regs_num] = saved_reg;
+ saved_reg->num = saved_regs_num++;
+ saved_reg->hard_regno = regno;
+ saved_reg->call_freq = call_freq;
+ saved_reg->first_p = FALSE;
+ saved_reg->next = -1;
+ return saved_reg;
+}
+
+/* Free memory allocated for the saved hard registers. */
+static void
+finish_saved_hard_regs (void)
+{
+ int i;
+
+ for (i = 0; i < saved_regs_num; i++)
+ free (all_saved_regs[i]);
+}
+
+/* The function is used to sort the saved hard register structures
+ according their frequency. */
+static int
+saved_hard_reg_compare_func (const void *v1p, const void *v2p)
+{
+ const struct saved_hard_reg *p1 = *(struct saved_hard_reg * const *) v1p;
+ const struct saved_hard_reg *p2 = *(struct saved_hard_reg * const *) v2p;
+
+ if (flag_omit_frame_pointer)
+ {
+ if (p1->call_freq - p2->call_freq != 0)
+ return p1->call_freq - p2->call_freq;
+ }
+ else if (p2->call_freq - p1->call_freq != 0)
+ return p2->call_freq - p1->call_freq;
+
+ return p1->num - p2->num;
}
/* Allocate save areas for any hard registers that might need saving.
overestimate slightly (especially if some of these registers are later
used as spill registers), but it should not be significant.
+ For IRA we use priority coloring to decrease stack slots needed for
+ saving hard registers through calls. We build conflicts for them
+ to do coloring.
+
Future work:
In the fallback case we should iterate backwards across all possible
- modes for the save, choosing the largest available one instead of
+ modes for the save, choosing the largest available one instead of
falling back to the smallest mode immediately. (eg TF -> DF -> SF).
We do not try to use "move multiple" instructions that exist
- on some machines (such as the 68k moveml). It could be a win to try
+ on some machines (such as the 68k moveml). It could be a win to try
and use them when possible. The hard part is doing it in a way that is
- machine independent since they might be saving non-consecutive
+ machine independent since they might be saving non-consecutive
registers. (imagine caller-saving d0,d1,a0,a1 on the 68k) */
void
-setup_save_areas ()
+setup_save_areas (void)
{
int i, j, k;
+ unsigned int r;
HARD_REG_SET hard_regs_used;
/* Allocate space in the save area for the largest multi-register
for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
if (reg_renumber[i] >= 0 && REG_N_CALLS_CROSSED (i) > 0)
{
- int regno = reg_renumber[i];
- int endregno
- = regno + HARD_REGNO_NREGS (regno, GET_MODE (regno_reg_rtx[i]));
- int nregs = endregno - regno;
-
- for (j = 0; j < nregs; j++)
- {
- if (call_used_regs[regno+j])
- SET_HARD_REG_BIT (hard_regs_used, regno+j);
- }
+ unsigned int regno = reg_renumber[i];
+ unsigned int endregno
+ = end_hard_regno (GET_MODE (regno_reg_rtx[i]), regno);
+ for (r = regno; r < endregno; r++)
+ if (call_used_regs[r])
+ SET_HARD_REG_BIT (hard_regs_used, r);
}
- /* Now run through all the call-used hard-registers and allocate
- space for them in the caller-save area. Try to allocate space
- in a manner which allows multi-register saves/restores to be done. */
-
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- for (j = MOVE_MAX / UNITS_PER_WORD; j > 0; j--)
- {
- int ok = 1;
- int do_save;
-
- /* If no mode exists for this size, try another. Also break out
- if we have already saved this hard register. */
- if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0)
- continue;
-
- /* See if any register in this group has been saved. */
- do_save = 1;
- for (k = 0; k < j; k++)
- if (regno_save_mem[i + k][1])
+ if (optimize && flag_ira_share_save_slots)
+ {
+ rtx insn, slot;
+ struct insn_chain *chain, *next;
+ char *saved_reg_conflicts;
+ unsigned int regno;
+ int next_k, freq;
+ struct saved_hard_reg *saved_reg, *saved_reg2, *saved_reg3;
+ int call_saved_regs_num;
+ struct saved_hard_reg *call_saved_regs[FIRST_PSEUDO_REGISTER];
+ HARD_REG_SET hard_regs_to_save, used_regs, this_insn_sets;
+ reg_set_iterator rsi;
+ int best_slot_num;
+ int prev_save_slots_num;
+ rtx prev_save_slots[FIRST_PSEUDO_REGISTER];
+
+ initiate_saved_hard_regs ();
+ /* Create hard reg saved regs. */
+ for (chain = reload_insn_chain; chain != 0; chain = next)
+ {
+ insn = chain->insn;
+ next = chain->next;
+ if (!CALL_P (insn)
+ || find_reg_note (insn, REG_NORETURN, NULL))
+ continue;
+ freq = REG_FREQ_FROM_BB (BLOCK_FOR_INSN (insn));
+ REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
+ &chain->live_throughout);
+ COPY_HARD_REG_SET (used_regs, call_used_reg_set);
+
+ /* Record all registers set in this call insn. These don't
+ need to be saved. N.B. the call insn might set a subreg
+ of a multi-hard-reg pseudo; then the pseudo is considered
+ live during the call, but the subreg that is set
+ isn't. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ /* Sibcalls are considered to set the return value. */
+ if (SIBLING_CALL_P (insn) && crtl->return_rtx)
+ mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets);
+
+ AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set);
+ AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets);
+ AND_HARD_REG_SET (hard_regs_to_save, used_regs);
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ {
+ if (hard_reg_map[regno] != NULL)
+ hard_reg_map[regno]->call_freq += freq;
+ else
+ saved_reg = new_saved_hard_reg (regno, freq);
+ }
+ /* Look through all live pseudos, mark their hard registers. */
+ EXECUTE_IF_SET_IN_REG_SET
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
{
- do_save = 0;
- break;
+ int r = reg_renumber[regno];
+ int bound;
+
+ if (r < 0)
+ continue;
+
+ bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ for (; r < bound; r++)
+ if (TEST_HARD_REG_BIT (used_regs, r))
+ {
+ if (hard_reg_map[r] != NULL)
+ hard_reg_map[r]->call_freq += freq;
+ else
+ saved_reg = new_saved_hard_reg (r, freq);
+ SET_HARD_REG_BIT (hard_regs_to_save, r);
+ }
}
- if (! do_save)
- continue;
+ }
+ /* Find saved hard register conflicts. */
+ saved_reg_conflicts = (char *) xmalloc (saved_regs_num * saved_regs_num);
+ memset (saved_reg_conflicts, 0, saved_regs_num * saved_regs_num);
+ for (chain = reload_insn_chain; chain != 0; chain = next)
+ {
+ call_saved_regs_num = 0;
+ insn = chain->insn;
+ next = chain->next;
+ if (!CALL_P (insn)
+ || find_reg_note (insn, REG_NORETURN, NULL))
+ continue;
+ REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
+ &chain->live_throughout);
+ COPY_HARD_REG_SET (used_regs, call_used_reg_set);
+
+ /* Record all registers set in this call insn. These don't
+ need to be saved. N.B. the call insn might set a subreg
+ of a multi-hard-reg pseudo; then the pseudo is considered
+ live during the call, but the subreg that is set
+ isn't. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ /* Sibcalls are considered to set the return value,
+ compare df-scan.c:df_get_call_refs. */
+ if (SIBLING_CALL_P (insn) && crtl->return_rtx)
+ mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets);
+
+ AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set);
+ AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets);
+ AND_HARD_REG_SET (hard_regs_to_save, used_regs);
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ {
+ gcc_assert (hard_reg_map[regno] != NULL);
+ call_saved_regs[call_saved_regs_num++] = hard_reg_map[regno];
+ }
+ /* Look through all live pseudos, mark their hard registers. */
+ EXECUTE_IF_SET_IN_REG_SET
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
+ {
+ int r = reg_renumber[regno];
+ int bound;
+
+ if (r < 0)
+ continue;
- for (k = 0; k < j; k++)
+ bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ for (; r < bound; r++)
+ if (TEST_HARD_REG_BIT (used_regs, r))
+ call_saved_regs[call_saved_regs_num++] = hard_reg_map[r];
+ }
+ for (i = 0; i < call_saved_regs_num; i++)
+ {
+ saved_reg = call_saved_regs[i];
+ for (j = 0; j < call_saved_regs_num; j++)
+ if (i != j)
+ {
+ saved_reg2 = call_saved_regs[j];
+ saved_reg_conflicts[saved_reg->num * saved_regs_num
+ + saved_reg2->num]
+ = saved_reg_conflicts[saved_reg2->num * saved_regs_num
+ + saved_reg->num]
+ = TRUE;
+ }
+ }
+ }
+ /* Sort saved hard regs. */
+ qsort (all_saved_regs, saved_regs_num, sizeof (struct saved_hard_reg *),
+ saved_hard_reg_compare_func);
+ /* Initiate slots available from the previous reload
+ iteration. */
+ prev_save_slots_num = save_slots_num;
+ memcpy (prev_save_slots, save_slots, save_slots_num * sizeof (rtx));
+ save_slots_num = 0;
+ /* Allocate stack slots for the saved hard registers. */
+ for (i = 0; i < saved_regs_num; i++)
+ {
+ saved_reg = all_saved_regs[i];
+ regno = saved_reg->hard_regno;
+ for (j = 0; j < i; j++)
{
- int regno = i + k;
- ok &= (TEST_HARD_REG_BIT (hard_regs_used, regno) != 0);
+ saved_reg2 = all_saved_regs[j];
+ if (! saved_reg2->first_p)
+ continue;
+ slot = saved_reg2->slot;
+ for (k = j; k >= 0; k = next_k)
+ {
+ saved_reg3 = all_saved_regs[k];
+ next_k = saved_reg3->next;
+ if (saved_reg_conflicts[saved_reg->num * saved_regs_num
+ + saved_reg3->num])
+ break;
+ }
+ if (k < 0
+ && (GET_MODE_SIZE (regno_save_mode[regno][1])
+ <= GET_MODE_SIZE (regno_save_mode
+ [saved_reg2->hard_regno][1])))
+ {
+ saved_reg->slot
+ = adjust_address_nv
+ (slot, regno_save_mode[saved_reg->hard_regno][1], 0);
+ regno_save_mem[regno][1] = saved_reg->slot;
+ saved_reg->next = saved_reg2->next;
+ saved_reg2->next = i;
+ if (dump_file != NULL)
+ fprintf (dump_file, "%d uses slot of %d\n",
+ regno, saved_reg2->hard_regno);
+ break;
+ }
}
+ if (j == i)
+ {
+ saved_reg->first_p = TRUE;
+ for (best_slot_num = -1, j = 0; j < prev_save_slots_num; j++)
+ {
+ slot = prev_save_slots[j];
+ if (slot == NULL_RTX)
+ continue;
+ if (GET_MODE_SIZE (regno_save_mode[regno][1])
+ <= GET_MODE_SIZE (GET_MODE (slot))
+ && best_slot_num < 0)
+ best_slot_num = j;
+ if (GET_MODE (slot) == regno_save_mode[regno][1])
+ break;
+ }
+ if (best_slot_num >= 0)
+ {
+ saved_reg->slot = prev_save_slots[best_slot_num];
+ saved_reg->slot
+ = adjust_address_nv
+ (saved_reg->slot,
+ regno_save_mode[saved_reg->hard_regno][1], 0);
+ if (dump_file != NULL)
+ fprintf (dump_file,
+ "%d uses a slot from prev iteration\n", regno);
+ prev_save_slots[best_slot_num] = NULL_RTX;
+ if (best_slot_num + 1 == prev_save_slots_num)
+ prev_save_slots_num--;
+ }
+ else
+ {
+ saved_reg->slot
+ = assign_stack_local_1
+ (regno_save_mode[regno][1],
+ GET_MODE_SIZE (regno_save_mode[regno][1]), 0, true);
+ if (dump_file != NULL)
+ fprintf (dump_file, "%d uses a new slot\n", regno);
+ }
+ regno_save_mem[regno][1] = saved_reg->slot;
+ save_slots[save_slots_num++] = saved_reg->slot;
+ }
+ }
+ free (saved_reg_conflicts);
+ finish_saved_hard_regs ();
+ }
+ else
+ {
+ /* Now run through all the call-used hard-registers and allocate
+ space for them in the caller-save area. Try to allocate space
+ in a manner which allows multi-register saves/restores to be done. */
- /* We have found an acceptable mode to store in. */
- if (ok)
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ for (j = MOVE_MAX_WORDS; j > 0; j--)
{
+ int do_save = 1;
+ /* If no mode exists for this size, try another. Also break out
+ if we have already saved this hard register. */
+ if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0)
+ continue;
+
+ /* See if any register in this group has been saved. */
+ for (k = 0; k < j; k++)
+ if (regno_save_mem[i + k][1])
+ {
+ do_save = 0;
+ break;
+ }
+ if (! do_save)
+ continue;
+
+ for (k = 0; k < j; k++)
+ if (! TEST_HARD_REG_BIT (hard_regs_used, i + k))
+ {
+ do_save = 0;
+ break;
+ }
+ if (! do_save)
+ continue;
+
+ /* We have found an acceptable mode to store in. Since
+ hard register is always saved in the widest mode
+ available, the mode may be wider than necessary, it is
+ OK to reduce the alignment of spill space. We will
+ verify that it is equal to or greater than required
+ when we restore and save the hard register in
+ insert_restore and insert_save. */
regno_save_mem[i][j]
- = assign_stack_local (regno_save_mode[i][j],
- GET_MODE_SIZE (regno_save_mode[i][j]), 0);
+ = assign_stack_local_1 (regno_save_mode[i][j],
+ GET_MODE_SIZE (regno_save_mode[i][j]),
+ 0, true);
/* Setup single word save area just in case... */
for (k = 0; k < j; k++)
- {
- /* This should not depend on WORDS_BIG_ENDIAN.
- The order of words in regs is the same as in memory. */
- rtx temp = gen_rtx_MEM (regno_save_mode[i+k][1],
- XEXP (regno_save_mem[i][j], 0));
-
- regno_save_mem[i+k][1]
- = adj_offsettable_operand (temp, k * UNITS_PER_WORD);
- }
+ /* This should not depend on WORDS_BIG_ENDIAN.
+ The order of words in regs is the same as in memory. */
+ regno_save_mem[i + k][1]
+ = adjust_address_nv (regno_save_mem[i][j],
+ regno_save_mode[i + k][1],
+ k * UNITS_PER_WORD);
}
- }
+ }
- return;
+ /* Now loop again and set the alias set of any save areas we made to
+ the alias set used to represent frame objects. */
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ for (j = MOVE_MAX_WORDS; j > 0; j--)
+ if (regno_save_mem[i][j] != 0)
+ set_mem_alias_set (regno_save_mem[i][j], get_frame_alias_set ());
}
+
\f
+
/* Find the places where hard regs are live across calls and save them. */
void
-save_call_clobbered_regs ()
+save_call_clobbered_regs (void)
{
- rtx insn;
- int b;
+ struct insn_chain *chain, *next, *last = NULL;
+ enum machine_mode save_mode [FIRST_PSEUDO_REGISTER];
+
+ /* Computed in mark_set_regs, holds all registers set by the current
+ instruction. */
+ HARD_REG_SET this_insn_sets;
- for (b = 0; b < n_basic_blocks; b++)
+ CLEAR_HARD_REG_SET (hard_regs_saved);
+ n_regs_saved = 0;
+
+ for (chain = reload_insn_chain; chain != 0; chain = next)
{
- regset regs_live = basic_block_live_at_start[b];
- int i, j;
- int regno;
-
- /* Compute hard regs live at start of block -- this is the
- real hard regs marked live, plus live pseudo regs that
- have been renumbered to hard regs. No registers have yet been
- saved because we restore all of them before the end of the basic
- block. */
-
- REG_SET_TO_HARD_REG_SET (hard_regs_live, regs_live);
- CLEAR_HARD_REG_SET (hard_regs_saved);
- CLEAR_HARD_REG_SET (hard_regs_need_restore);
- n_regs_saved = 0;
-
- EXECUTE_IF_SET_IN_REG_SET (regs_live, 0, i,
- {
- if ((regno = reg_renumber[i]) >= 0)
- for (j = regno;
- j < regno + HARD_REGNO_NREGS (regno,
- PSEUDO_REGNO_MODE (i));
- j++)
- SET_HARD_REG_BIT (hard_regs_live, j);
- });
-
- /* Now scan the insns in the block, keeping track of what hard
- regs are live as we go. When we see a call, save the live
- call-clobbered hard regs. */
-
- for (insn = basic_block_head[b]; ; insn = NEXT_INSN (insn))
- {
- RTX_CODE code = GET_CODE (insn);
+ rtx insn = chain->insn;
+ enum rtx_code code = GET_CODE (insn);
- if (GET_RTX_CLASS (code) == 'i')
- {
- rtx link;
-
- /* If some registers have been saved, see if INSN references
- any of them. We must restore them before the insn if so. */
-
- if (n_regs_saved)
- restore_referenced_regs (PATTERN (insn), insn, b);
-
- /* NB: the normal procedure is to first enliven any
- registers set by insn, then deaden any registers that
- had their last use at insn. This is incorrect now,
- since multiple pseudos may have been mapped to the
- same hard reg, and the death notes are ambiguous. So
- it must be done in the other, safe, order. */
-
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- if (REG_NOTE_KIND (link) == REG_DEAD)
- clear_reg_live (XEXP (link, 0));
-
- /* When we reach a call, we need to save all registers that are
- live, call-used, not fixed, and not already saved. We must
- test at this point because registers that die in a CALL_INSN
- are not live across the call and likewise for registers that
- are born in the CALL_INSN.
-
- If registers are filled with parameters for this function,
- and some of these are also being set by this function, then
- they will not appear to die (no REG_DEAD note for them),
- to check if in fact they do, collect the set registers in
- hard_regs_live first. */
-
- if (code == CALL_INSN)
- {
- HARD_REG_SET this_call_sets;
- {
- HARD_REG_SET old_hard_regs_live;
+ next = chain->next;
- /* Save the hard_regs_live information. */
- COPY_HARD_REG_SET (old_hard_regs_live, hard_regs_live);
+ gcc_assert (!chain->is_caller_save_insn);
- /* Now calculate hard_regs_live for this CALL_INSN
- only. */
- CLEAR_HARD_REG_SET (hard_regs_live);
- note_stores (PATTERN (insn), set_reg_live);
- COPY_HARD_REG_SET (this_call_sets, hard_regs_live);
+ if (NONDEBUG_INSN_P (insn))
+ {
+ /* If some registers have been saved, see if INSN references
+ any of them. We must restore them before the insn if so. */
- /* Restore the hard_regs_live information. */
- COPY_HARD_REG_SET (hard_regs_live, old_hard_regs_live);
- }
+ if (n_regs_saved)
+ {
+ int regno;
- for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
- if (call_used_regs[regno] && ! call_fixed_regs[regno]
- && TEST_HARD_REG_BIT (hard_regs_live, regno)
- /* It must not be set by this instruction. */
- && ! TEST_HARD_REG_BIT (this_call_sets, regno)
- && ! TEST_HARD_REG_BIT (hard_regs_saved, regno))
- regno += insert_save (insn, 1, regno, b);
-
- /* Put the information for this CALL_INSN on top of what
- we already had. */
- IOR_HARD_REG_SET (hard_regs_live, this_call_sets);
- COPY_HARD_REG_SET (hard_regs_need_restore, hard_regs_saved);
-
- /* Must recompute n_regs_saved. */
- n_regs_saved = 0;
- for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
- if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
- n_regs_saved++;
- }
+ if (code == JUMP_INSN)
+ /* Restore all registers if this is a JUMP_INSN. */
+ COPY_HARD_REG_SET (referenced_regs, hard_regs_saved);
else
{
- note_stores (PATTERN (insn), set_reg_live);
-#ifdef AUTO_INC_DEC
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- if (REG_NOTE_KIND (link) == REG_INC)
- set_reg_live (XEXP (link, 0), NULL_RTX);
-#endif
+ CLEAR_HARD_REG_SET (referenced_regs);
+ mark_referenced_regs (&PATTERN (insn),
+ mark_reg_as_referenced, NULL);
+ AND_HARD_REG_SET (referenced_regs, hard_regs_saved);
}
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- if (REG_NOTE_KIND (link) == REG_UNUSED)
- clear_reg_live (XEXP (link, 0));
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (referenced_regs, regno))
+ regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS, save_mode);
}
- if (insn == basic_block_end[b])
- break;
+ if (code == CALL_INSN
+ && ! SIBLING_CALL_P (insn)
+ && ! find_reg_note (insn, REG_NORETURN, NULL))
+ {
+ unsigned regno;
+ HARD_REG_SET hard_regs_to_save;
+ reg_set_iterator rsi;
+
+ /* Use the register life information in CHAIN to compute which
+ regs are live during the call. */
+ REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
+ &chain->live_throughout);
+ /* Save hard registers always in the widest mode available. */
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ save_mode [regno] = regno_save_mode [regno][1];
+ else
+ save_mode [regno] = VOIDmode;
+
+ /* Look through all live pseudos, mark their hard registers
+ and choose proper mode for saving. */
+ EXECUTE_IF_SET_IN_REG_SET
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
+ {
+ int r = reg_renumber[regno];
+ int nregs;
+ enum machine_mode mode;
+
+ if (r < 0)
+ continue;
+ nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ mode = HARD_REGNO_CALLER_SAVE_MODE
+ (r, nregs, PSEUDO_REGNO_MODE (regno));
+ if (GET_MODE_BITSIZE (mode)
+ > GET_MODE_BITSIZE (save_mode[r]))
+ save_mode[r] = mode;
+ while (nregs-- > 0)
+ SET_HARD_REG_BIT (hard_regs_to_save, r + nregs);
+ }
+
+ /* Record all registers set in this call insn. These don't need
+ to be saved. N.B. the call insn might set a subreg of a
+ multi-hard-reg pseudo; then the pseudo is considered live
+ during the call, but the subreg that is set isn't. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+
+ /* Compute which hard regs must be saved before this call. */
+ AND_COMPL_HARD_REG_SET (hard_regs_to_save, call_fixed_reg_set);
+ AND_COMPL_HARD_REG_SET (hard_regs_to_save, this_insn_sets);
+ AND_COMPL_HARD_REG_SET (hard_regs_to_save, hard_regs_saved);
+ AND_HARD_REG_SET (hard_regs_to_save, call_used_reg_set);
+
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ regno += insert_save (chain, 1, regno, &hard_regs_to_save, save_mode);
+
+ /* Must recompute n_regs_saved. */
+ n_regs_saved = 0;
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
+ n_regs_saved++;
+ }
+ last = chain;
}
+ else if (DEBUG_INSN_P (insn) && n_regs_saved)
+ mark_referenced_regs (&PATTERN (insn),
+ replace_reg_with_saved_mem,
+ save_mode);
- /* At the end of the basic block, we must restore any registers that
- remain saved. If the last insn in the block is a JUMP_INSN, put
- the restore before the insn, otherwise, put it after the insn. */
+ if (chain->next == 0 || chain->next->block != chain->block)
+ {
+ int regno;
+ /* At the end of the basic block, we must restore any registers that
+ remain saved. If the last insn in the block is a JUMP_INSN, put
+ the restore before the insn, otherwise, put it after the insn. */
- if (n_regs_saved)
- for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
- if (TEST_HARD_REG_BIT (hard_regs_need_restore, regno))
- regno += insert_restore (insn, GET_CODE (insn) == JUMP_INSN,
- regno,
- MOVE_MAX / UNITS_PER_WORD, b);
+ if (DEBUG_INSN_P (insn) && last && last->block == chain->block)
+ {
+ rtx ins, prev;
+ basic_block bb = BLOCK_FOR_INSN (insn);
+
+ /* When adding hard reg restores after a DEBUG_INSN, move
+ all notes between last real insn and this DEBUG_INSN after
+ the DEBUG_INSN, otherwise we could get code
+ -g/-g0 differences. */
+ for (ins = PREV_INSN (insn); ins != last->insn; ins = prev)
+ {
+ prev = PREV_INSN (ins);
+ if (NOTE_P (ins))
+ {
+ NEXT_INSN (prev) = NEXT_INSN (ins);
+ PREV_INSN (NEXT_INSN (ins)) = prev;
+ PREV_INSN (ins) = insn;
+ NEXT_INSN (ins) = NEXT_INSN (insn);
+ NEXT_INSN (insn) = ins;
+ if (NEXT_INSN (ins))
+ PREV_INSN (NEXT_INSN (ins)) = ins;
+ if (BB_END (bb) == insn)
+ BB_END (bb) = ins;
+ }
+ else
+ gcc_assert (DEBUG_INSN_P (ins));
+ }
+ }
+ last = NULL;
+
+ if (n_regs_saved)
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
+ regno += insert_restore (chain, JUMP_P (insn),
+ regno, MOVE_MAX_WORDS, save_mode);
+ }
}
}
-/* Here from note_stores when an insn stores a value in a register.
- Set the proper bit or bits in hard_regs_live. All pseudos that have
+/* Here from note_stores, or directly from save_call_clobbered_regs, when
+ an insn stores a value in a register.
+ Set the proper bit or bits in this_insn_sets. All pseudos that have
been assigned hard regs have had their register number changed already,
so we can ignore pseudos. */
-
static void
-set_reg_live (reg, setter)
- rtx reg;
- rtx setter ATTRIBUTE_UNUSED;
+mark_set_regs (rtx reg, const_rtx setter ATTRIBUTE_UNUSED, void *data)
{
- register int regno, endregno, i;
- enum machine_mode mode = GET_MODE (reg);
- int word = 0;
+ int regno, endregno, i;
+ HARD_REG_SET *this_insn_sets = (HARD_REG_SET *) data;
if (GET_CODE (reg) == SUBREG)
{
- word = SUBREG_WORD (reg);
- reg = SUBREG_REG (reg);
+ rtx inner = SUBREG_REG (reg);
+ if (!REG_P (inner) || REGNO (inner) >= FIRST_PSEUDO_REGISTER)
+ return;
+ regno = subreg_regno (reg);
+ endregno = regno + subreg_nregs (reg);
}
-
- if (GET_CODE (reg) != REG || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
+ else if (REG_P (reg)
+ && REGNO (reg) < FIRST_PSEUDO_REGISTER)
+ {
+ regno = REGNO (reg);
+ endregno = END_HARD_REGNO (reg);
+ }
+ else
return;
- regno = REGNO (reg) + word;
- endregno = regno + HARD_REGNO_NREGS (regno, mode);
-
for (i = regno; i < endregno; i++)
- {
- SET_HARD_REG_BIT (hard_regs_live, i);
- CLEAR_HARD_REG_BIT (hard_regs_saved, i);
- CLEAR_HARD_REG_BIT (hard_regs_need_restore, i);
- }
+ SET_HARD_REG_BIT (*this_insn_sets, i);
}
-/* Here when a REG_DEAD note records the last use of a reg. Clear
- the appropriate bit or bits in hard_regs_live. Again we can ignore
- pseudos. */
-
+/* Here from note_stores when an insn stores a value in a register.
+ Set the proper bit or bits in the passed regset. All pseudos that have
+ been assigned hard regs have had their register number changed already,
+ so we can ignore pseudos. */
static void
-clear_reg_live (reg)
- rtx reg;
+add_stored_regs (rtx reg, const_rtx setter, void *data)
{
- register int regno, endregno, i;
+ int regno, endregno, i;
+ enum machine_mode mode = GET_MODE (reg);
+ int offset = 0;
- if (GET_CODE (reg) != REG || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
+ if (GET_CODE (setter) == CLOBBER)
return;
- regno = REGNO (reg);
- endregno= regno + HARD_REGNO_NREGS (regno, GET_MODE (reg));
-
- for (i = regno; i < endregno; i++)
+ if (GET_CODE (reg) == SUBREG
+ && REG_P (SUBREG_REG (reg))
+ && REGNO (SUBREG_REG (reg)) < FIRST_PSEUDO_REGISTER)
{
- CLEAR_HARD_REG_BIT (hard_regs_live, i);
- CLEAR_HARD_REG_BIT (hard_regs_need_restore, i);
- CLEAR_HARD_REG_BIT (hard_regs_saved, i);
+ offset = subreg_regno_offset (REGNO (SUBREG_REG (reg)),
+ GET_MODE (SUBREG_REG (reg)),
+ SUBREG_BYTE (reg),
+ GET_MODE (reg));
+ regno = REGNO (SUBREG_REG (reg)) + offset;
+ endregno = regno + subreg_nregs (reg);
+ }
+ else
+ {
+ if (!REG_P (reg) || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
+ return;
+
+ regno = REGNO (reg) + offset;
+ endregno = end_hard_regno (mode, regno);
}
-}
-\f
-/* If any register currently residing in the save area is referenced in X,
- which is part of INSN, emit code to restore the register in front of
- INSN. */
+ for (i = regno; i < endregno; i++)
+ SET_REGNO_REG_SET ((regset) data, i);
+}
+
+/* Walk X and record all referenced registers in REFERENCED_REGS. */
static void
-restore_referenced_regs (x, insn, block)
- rtx x;
- rtx insn;
- int block;
+mark_referenced_regs (rtx *loc, refmarker_fn *mark, void *arg)
{
- enum rtx_code code = GET_CODE (x);
- char *fmt;
+ enum rtx_code code = GET_CODE (*loc);
+ const char *fmt;
int i, j;
- if (code == CLOBBER)
- return;
+ if (code == SET)
+ mark_referenced_regs (&SET_SRC (*loc), mark, arg);
+ if (code == SET || code == CLOBBER)
+ {
+ loc = &SET_DEST (*loc);
+ code = GET_CODE (*loc);
+ if ((code == REG && REGNO (*loc) < FIRST_PSEUDO_REGISTER)
+ || code == PC || code == CC0
+ || (code == SUBREG && REG_P (SUBREG_REG (*loc))
+ && REGNO (SUBREG_REG (*loc)) < FIRST_PSEUDO_REGISTER
+ /* If we're setting only part of a multi-word register,
+ we shall mark it as referenced, because the words
+ that are not being set should be restored. */
+ && ((GET_MODE_SIZE (GET_MODE (*loc))
+ >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (*loc))))
+ || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (*loc)))
+ <= UNITS_PER_WORD))))
+ return;
+ }
+ if (code == MEM || code == SUBREG)
+ {
+ loc = &XEXP (*loc, 0);
+ code = GET_CODE (*loc);
+ }
if (code == REG)
{
- int regno = REGNO (x);
+ int regno = REGNO (*loc);
+ int hardregno = (regno < FIRST_PSEUDO_REGISTER ? regno
+ : reg_renumber[regno]);
+
+ if (hardregno >= 0)
+ mark (loc, GET_MODE (*loc), hardregno, arg);
+ else if (arg)
+ /* ??? Will we ever end up with an equiv expression in a debug
+ insn, that would have required restoring a reg, or will
+ reload take care of it for us? */
+ return;
+ /* If this is a pseudo that did not get a hard register, scan its
+ memory location, since it might involve the use of another
+ register, which might be saved. */
+ else if (reg_equiv_mem[regno] != 0)
+ mark_referenced_regs (&XEXP (reg_equiv_mem[regno], 0), mark, arg);
+ else if (reg_equiv_address[regno] != 0)
+ mark_referenced_regs (®_equiv_address[regno], mark, arg);
+ return;
+ }
- /* If this is a pseudo, scan its memory location, since it might
- involve the use of another register, which might be saved. */
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ mark_referenced_regs (&XEXP (*loc, i), mark, arg);
+ else if (fmt[i] == 'E')
+ for (j = XVECLEN (*loc, i) - 1; j >= 0; j--)
+ mark_referenced_regs (&XVECEXP (*loc, i, j), mark, arg);
+ }
+}
+
+/* Parameter function for mark_referenced_regs() that adds registers
+ present in the insn and in equivalent mems and addresses to
+ referenced_regs. */
+
+static void
+mark_reg_as_referenced (rtx *loc ATTRIBUTE_UNUSED,
+ enum machine_mode mode,
+ int hardregno,
+ void *arg ATTRIBUTE_UNUSED)
+{
+ add_to_hard_reg_set (&referenced_regs, mode, hardregno);
+}
+
+/* Parameter function for mark_referenced_regs() that replaces
+ registers referenced in a debug_insn that would have been restored,
+ should it be a non-debug_insn, with their save locations. */
+
+static void
+replace_reg_with_saved_mem (rtx *loc,
+ enum machine_mode mode,
+ int regno,
+ void *arg)
+{
+ unsigned int i, nregs = hard_regno_nregs [regno][mode];
+ rtx mem;
+ enum machine_mode *save_mode = (enum machine_mode *)arg;
+
+ for (i = 0; i < nregs; i++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ break;
+
+ /* If none of the registers in the range would need restoring, we're
+ all set. */
+ if (i == nregs)
+ return;
+
+ while (++i < nregs)
+ if (!TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ break;
- if (regno >= FIRST_PSEUDO_REGISTER
- && reg_equiv_mem[regno] != 0)
- restore_referenced_regs (XEXP (reg_equiv_mem[regno], 0),
- insn, block);
- else if (regno >= FIRST_PSEUDO_REGISTER
- && reg_equiv_address[regno] != 0)
- restore_referenced_regs (reg_equiv_address[regno],
- insn, block);
+ if (i == nregs
+ && regno_save_mem[regno][nregs])
+ {
+ mem = copy_rtx (regno_save_mem[regno][nregs]);
- /* Otherwise if this is a hard register, restore any piece of it that
- is currently saved. */
+ if (nregs == (unsigned int) hard_regno_nregs[regno][save_mode[regno]])
+ mem = adjust_address_nv (mem, save_mode[regno], 0);
- else if (regno < FIRST_PSEUDO_REGISTER)
+ if (GET_MODE (mem) != mode)
{
- int numregs = HARD_REGNO_NREGS (regno, GET_MODE (x));
- /* Save at most SAVEREGS at a time. This can not be larger than
- MOVE_MAX, because that causes insert_restore to fail. */
- int saveregs = MIN (numregs, MOVE_MAX / UNITS_PER_WORD);
- int endregno = regno + numregs;
-
- for (i = regno; i < endregno; i++)
- if (TEST_HARD_REG_BIT (hard_regs_need_restore, i))
- i += insert_restore (insn, 1, i, saveregs, block);
+ /* This is gen_lowpart_if_possible(), but without validating
+ the newly-formed address. */
+ int offset = 0;
+
+ if (WORDS_BIG_ENDIAN)
+ offset = (MAX (GET_MODE_SIZE (GET_MODE (mem)), UNITS_PER_WORD)
+ - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
+ if (BYTES_BIG_ENDIAN)
+ /* Adjust the address so that the address-after-the-data is
+ unchanged. */
+ offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))
+ - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (mem))));
+
+ mem = adjust_address_nv (mem, mode, offset);
}
-
- return;
}
-
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ else
{
- if (fmt[i] == 'e')
- restore_referenced_regs (XEXP (x, i), insn, block);
- else if (fmt[i] == 'E')
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- restore_referenced_regs (XVECEXP (x, i, j), insn, block);
+ mem = gen_rtx_CONCATN (mode, rtvec_alloc (nregs));
+ for (i = 0; i < nregs; i++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ {
+ gcc_assert (regno_save_mem[regno + i][1]);
+ XVECEXP (mem, 0, i) = copy_rtx (regno_save_mem[regno + i][1]);
+ }
+ else
+ {
+ gcc_assert (save_mode[regno] != VOIDmode);
+ XVECEXP (mem, 0, i) = gen_rtx_REG (save_mode [regno],
+ regno + i);
+ }
}
+
+ gcc_assert (GET_MODE (mem) == mode);
+ *loc = mem;
}
+
\f
-/* Insert a sequence of insns to restore REGNO. Place these insns in front
- of or after INSN (determined by BEFORE_P). MAXRESTORE is the maximum
- number of registers which should be restored during this call. It should
- never be less than 1 since we only work with entire registers.
+/* Insert a sequence of insns to restore. Place these insns in front of
+ CHAIN if BEFORE_P is nonzero, behind the insn otherwise. MAXRESTORE is
+ the maximum number of registers which should be restored during this call.
+ It should never be less than 1 since we only work with entire registers.
Note that we have verified in init_caller_save that we can do this
with a simple SET, so use it. Set INSN_CODE to what we save there
Return the extra number of registers saved. */
static int
-insert_restore (insn, before_p, regno, maxrestore, block)
- rtx insn;
- int before_p;
- int regno;
- int maxrestore;
- int block;
+insert_restore (struct insn_chain *chain, int before_p, int regno,
+ int maxrestore, enum machine_mode *save_mode)
{
+ int i, k;
rtx pat = NULL_RTX;
- enum insn_code code = CODE_FOR_nothing;
- int numregs = 0;
- int i, j, k;
- int ok;
-
- /* A common failure mode if register status is not correct in the RTL
- is for this routine to be called with a REGNO we didn't expect to
- save. That will cause us to write an insn with a (nil) SET_DEST
- or SET_SRC. Instead of doing so and causing a crash later, check
- for this common case and abort here instead. This will remove one
- step in debugging such problems. */
-
- if (regno_save_mem[regno][1] == 0)
- abort ();
-
- /* Get the pattern to emit and update our status. */
-
- /* See if we can restore `maxrestore' registers at once. Work
+ int code;
+ unsigned int numregs = 0;
+ struct insn_chain *new_chain;
+ rtx mem;
+
+ /* A common failure mode if register status is not correct in the
+ RTL is for this routine to be called with a REGNO we didn't
+ expect to save. That will cause us to write an insn with a (nil)
+ SET_DEST or SET_SRC. Instead of doing so and causing a crash
+ later, check for this common case here instead. This will remove
+ one step in debugging such problems. */
+ gcc_assert (regno_save_mem[regno][1]);
+
+ /* Get the pattern to emit and update our status.
+
+ See if we can restore `maxrestore' registers at once. Work
backwards to the single register case. */
for (i = maxrestore; i > 0; i--)
{
- ok = 1;
- if (regno_save_mem[regno][i])
- for (j = 0; j < i; j++)
- {
- if (! TEST_HARD_REG_BIT (hard_regs_need_restore, regno + j))
- ok = 0;
- }
- else
+ int j;
+ int ok = 1;
+
+ if (regno_save_mem[regno][i] == 0)
continue;
- /* Must do this one restore at a time */
+ for (j = 0; j < i; j++)
+ if (! TEST_HARD_REG_BIT (hard_regs_saved, regno + j))
+ {
+ ok = 0;
+ break;
+ }
+ /* Must do this one restore at a time. */
if (! ok)
continue;
-
- pat = gen_rtx_SET (VOIDmode,
- gen_rtx_REG (GET_MODE (regno_save_mem[regno][i]),
- regno),
- regno_save_mem[regno][i]);
- code = reg_restore_code[regno][i];
-
-
- /* Clear status for all registers we restored. */
- for (k = 0; k < i; k++)
- {
- CLEAR_HARD_REG_BIT (hard_regs_need_restore, regno + k);
- n_regs_saved--;
- }
numregs = i;
break;
}
- insert_one_insn (insn, before_p, code, pat, block);
+ mem = regno_save_mem [regno][numregs];
+ if (save_mode [regno] != VOIDmode
+ && save_mode [regno] != GET_MODE (mem)
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]
+ /* Check that insn to restore REGNO in save_mode[regno] is
+ correct. */
+ && reg_save_code (regno, save_mode[regno]) >= 0)
+ mem = adjust_address (mem, save_mode[regno], 0);
+ else
+ mem = copy_rtx (mem);
- /* Tell our callers how many extra registers we saved/restored */
+ /* Verify that the alignment of spill space is equal to or greater
+ than required. */
+ gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT,
+ GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem));
+
+ pat = gen_rtx_SET (VOIDmode,
+ gen_rtx_REG (GET_MODE (mem),
+ regno), mem);
+ code = reg_restore_code (regno, GET_MODE (mem));
+ new_chain = insert_one_insn (chain, before_p, code, pat);
+
+ /* Clear status for all registers we restored. */
+ for (k = 0; k < i; k++)
+ {
+ CLEAR_HARD_REG_BIT (hard_regs_saved, regno + k);
+ SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k);
+ n_regs_saved--;
+ }
+
+ /* Tell our callers how many extra registers we saved/restored. */
return numregs - 1;
}
-/* Like insert_restore, but emit code to save REGNO. */
+/* Like insert_restore above, but save registers instead. */
+
static int
-insert_save (insn, before_p, regno, block)
- rtx insn;
- int before_p;
- int regno;
- int block;
+insert_save (struct insn_chain *chain, int before_p, int regno,
+ HARD_REG_SET (*to_save), enum machine_mode *save_mode)
{
+ int i;
+ unsigned int k;
rtx pat = NULL_RTX;
- enum insn_code code = CODE_FOR_nothing;
- int numregs = 0;
- int i, j, k;
- int ok;
-
- /* A common failure mode if register status is not correct in the RTL
- is for this routine to be called with a REGNO we didn't expect to
- save. That will cause us to write an insn with a (nil) SET_DEST
- or SET_SRC. Instead of doing so and causing a crash later, check
- for this common case and abort here instead. This will remove one
+ int code;
+ unsigned int numregs = 0;
+ struct insn_chain *new_chain;
+ rtx mem;
+
+ /* A common failure mode if register status is not correct in the
+ RTL is for this routine to be called with a REGNO we didn't
+ expect to save. That will cause us to write an insn with a (nil)
+ SET_DEST or SET_SRC. Instead of doing so and causing a crash
+ later, check for this common case here. This will remove one
step in debugging such problems. */
+ gcc_assert (regno_save_mem[regno][1]);
- if (regno_save_mem[regno][1] == 0)
- abort ();
-
- /* Get the pattern to emit and update our status. */
+ /* Get the pattern to emit and update our status.
- /* See if we can save several registers with a single instruction.
+ See if we can save several registers with a single instruction.
Work backwards to the single register case. */
- for (i = MOVE_MAX / UNITS_PER_WORD; i > 0; i--)
+ for (i = MOVE_MAX_WORDS; i > 0; i--)
{
- ok = 1;
- if (regno_save_mem[regno][i] != 0)
- for (j = 0; j < i; j++)
- {
- if (! call_used_regs[regno + j] || call_fixed_regs[regno + j]
- || ! TEST_HARD_REG_BIT (hard_regs_live, regno + j)
- || TEST_HARD_REG_BIT (hard_regs_saved, regno + j))
- ok = 0;
- }
- else
+ int j;
+ int ok = 1;
+ if (regno_save_mem[regno][i] == 0)
continue;
- /* Must do this one save at a time */
+ for (j = 0; j < i; j++)
+ if (! TEST_HARD_REG_BIT (*to_save, regno + j))
+ {
+ ok = 0;
+ break;
+ }
+ /* Must do this one save at a time. */
if (! ok)
continue;
- pat = gen_rtx_SET (VOIDmode, regno_save_mem[regno][i],
- gen_rtx_REG (GET_MODE (regno_save_mem[regno][i]),
- regno));
- code = reg_save_code[regno][i];
-
- /* Set hard_regs_saved for all the registers we saved. */
- for (k = 0; k < i; k++)
- {
- SET_HARD_REG_BIT (hard_regs_saved, regno + k);
- SET_HARD_REG_BIT (hard_regs_need_restore, regno + k);
- n_regs_saved++;
- }
-
numregs = i;
break;
}
- insert_one_insn (insn, before_p, code, pat, block);
+ mem = regno_save_mem [regno][numregs];
+ if (save_mode [regno] != VOIDmode
+ && save_mode [regno] != GET_MODE (mem)
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]
+ /* Check that insn to save REGNO in save_mode[regno] is
+ correct. */
+ && reg_save_code (regno, save_mode[regno]) >= 0)
+ mem = adjust_address (mem, save_mode[regno], 0);
+ else
+ mem = copy_rtx (mem);
+
+ /* Verify that the alignment of spill space is equal to or greater
+ than required. */
+ gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT,
+ GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem));
- /* Tell our callers how many extra registers we saved/restored */
+ pat = gen_rtx_SET (VOIDmode, mem,
+ gen_rtx_REG (GET_MODE (mem),
+ regno));
+ code = reg_save_code (regno, GET_MODE (mem));
+ new_chain = insert_one_insn (chain, before_p, code, pat);
+
+ /* Set hard_regs_saved and dead_or_set for all the registers we saved. */
+ for (k = 0; k < numregs; k++)
+ {
+ SET_HARD_REG_BIT (hard_regs_saved, regno + k);
+ SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k);
+ n_regs_saved++;
+ }
+
+ /* Tell our callers how many extra registers we saved/restored. */
return numregs - 1;
}
-/* Emit one insn, set the code, and update basic block boundaries. */
+/* A for_each_rtx callback used by add_used_regs. Add the hard-register
+ equivalent of each REG to regset DATA. */
+
+static int
+add_used_regs_1 (rtx *loc, void *data)
+{
+ int regno, i;
+ regset live;
+ rtx x;
+
+ x = *loc;
+ live = (regset) data;
+ if (REG_P (x))
+ {
+ regno = REGNO (x);
+ if (!HARD_REGISTER_NUM_P (regno))
+ regno = reg_renumber[regno];
+ if (regno >= 0)
+ for (i = hard_regno_nregs[regno][GET_MODE (x)] - 1; i >= 0; i--)
+ SET_REGNO_REG_SET (live, regno + i);
+ }
+ return 0;
+}
+
+/* A note_uses callback used by insert_one_insn. Add the hard-register
+ equivalent of each REG to regset DATA. */
+
static void
-insert_one_insn (insn, before_p, code, pat, block)
- rtx insn;
- int before_p;
- enum rtx_code code;
- rtx pat;
- int block;
+add_used_regs (rtx *loc, void *data)
+{
+ for_each_rtx (loc, add_used_regs_1, data);
+}
+
+/* Emit a new caller-save insn and set the code. */
+static struct insn_chain *
+insert_one_insn (struct insn_chain *chain, int before_p, int code, rtx pat)
{
- rtx insert_point = insn;
- rtx new;
+ rtx insn = chain->insn;
+ struct insn_chain *new_chain;
+
#ifdef HAVE_cc0
/* If INSN references CC0, put our insns in front of the insn that sets
CC0. This is always safe, since the only way we could be passed an
isn't a problem. We do, however, assume here that CALL_INSNs don't
reference CC0. Guard against non-INSN's like CODE_LABEL. */
- if ((GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN)
+ if ((NONJUMP_INSN_P (insn) || JUMP_P (insn))
&& before_p
&& reg_referenced_p (cc0_rtx, PATTERN (insn)))
- insert_point = prev_nonnote_insn (insn);
+ chain = chain->prev, insn = chain->insn;
#endif
+ new_chain = new_insn_chain ();
if (before_p)
{
- new = emit_insn_before (pat, insert_point);
- if (insert_point == basic_block_head[block])
- basic_block_head[block] = new;
+ rtx link;
+
+ new_chain->prev = chain->prev;
+ if (new_chain->prev != 0)
+ new_chain->prev->next = new_chain;
+ else
+ reload_insn_chain = new_chain;
+
+ chain->prev = new_chain;
+ new_chain->next = chain;
+ new_chain->insn = emit_insn_before (pat, insn);
+ /* ??? It would be nice if we could exclude the already / still saved
+ registers from the live sets. */
+ COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout);
+ note_uses (&PATTERN (chain->insn), add_used_regs,
+ &new_chain->live_throughout);
+ /* If CHAIN->INSN is a call, then the registers which contain
+ the arguments to the function are live in the new insn. */
+ if (CALL_P (chain->insn))
+ for (link = CALL_INSN_FUNCTION_USAGE (chain->insn);
+ link != NULL_RTX;
+ link = XEXP (link, 1))
+ note_uses (&XEXP (link, 0), add_used_regs,
+ &new_chain->live_throughout);
+
+ CLEAR_REG_SET (&new_chain->dead_or_set);
+ if (chain->insn == BB_HEAD (BASIC_BLOCK (chain->block)))
+ BB_HEAD (BASIC_BLOCK (chain->block)) = new_chain->insn;
}
else
{
- new = emit_insn_after (pat, insert_point);
- if (insert_point == basic_block_end[block])
- basic_block_end[block] = new;
+ new_chain->next = chain->next;
+ if (new_chain->next != 0)
+ new_chain->next->prev = new_chain;
+ chain->next = new_chain;
+ new_chain->prev = chain;
+ new_chain->insn = emit_insn_after (pat, insn);
+ /* ??? It would be nice if we could exclude the already / still saved
+ registers from the live sets, and observe REG_UNUSED notes. */
+ COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout);
+ /* Registers that are set in CHAIN->INSN live in the new insn.
+ (Unless there is a REG_UNUSED note for them, but we don't
+ look for them here.) */
+ note_stores (PATTERN (chain->insn), add_stored_regs,
+ &new_chain->live_throughout);
+ CLEAR_REG_SET (&new_chain->dead_or_set);
+ if (chain->insn == BB_END (BASIC_BLOCK (chain->block)))
+ BB_END (BASIC_BLOCK (chain->block)) = new_chain->insn;
}
+ new_chain->block = chain->block;
+ new_chain->is_caller_save_insn = 1;
- INSN_CODE (new) = code;
+ INSN_CODE (new_chain->insn) = code;
+ return new_chain;
}
+#include "gt-caller-save.h"
OSDN Git Service
