-- --
-- B o d y --
-- --
--- Copyright (C) 1992-2003 Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
--- ware Foundation; either version 2, or (at your option) any later ver- --
+-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
--- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
--- MA 02111-1307, USA. --
+-- Public License distributed with GNAT; see file COPYING3. If not, go to --
+-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
with Errout; use Errout;
with Fname; use Fname;
with Fname.UF; use Fname.UF;
-with Namet; use Namet;
with Nlists; use Nlists;
with Nmake; use Nmake;
with Opt; use Opt;
with Osint.C; use Osint.C;
with Output; use Output;
with Par;
+with Restrict; use Restrict;
with Scn; use Scn;
with Sinfo; use Sinfo;
with Sinput; use Sinput;
with Sinput.L; use Sinput.L;
with Stand; use Stand;
-with Targparm; use Targparm;
with Tbuild; use Tbuild;
with Uname; use Uname;
-- Local Subprograms --
-----------------------
+ function From_Limited_With_Chain return Boolean;
+ -- Check whether a possible circular dependence includes units that
+ -- have been loaded through limited_with clauses, in which case there
+ -- is no real circularity.
+
function Spec_Is_Irrelevant
(Spec_Unit : Unit_Number_Type;
- Body_Unit : Unit_Number_Type)
- return Boolean;
+ Body_Unit : Unit_Number_Type) return Boolean;
-- The Spec_Unit and Body_Unit parameters are the unit numbers of the
-- spec file that corresponds to the main unit which is a body. This
-- function determines if the spec file is irrelevant and will be
-- This procedure is used to generate error message info lines that
-- trace the current dependency chain when a load error occurs.
+ ------------------------------
+ -- Change_Main_Unit_To_Spec --
+ ------------------------------
+
+ procedure Change_Main_Unit_To_Spec is
+ U : Unit_Record renames Units.Table (Main_Unit);
+ N : File_Name_Type;
+ X : Source_File_Index;
+
+ begin
+ -- Get name of unit body
+
+ Get_Name_String (U.Unit_File_Name);
+
+ -- Note: for the following we should really generalize and consult the
+ -- file name pattern data, but for now we just deal with the common
+ -- naming cases, which is probably good enough in practice ???
+
+ -- Change .adb to .ads
+
+ if Name_Len >= 5
+ and then Name_Buffer (Name_Len - 3 .. Name_Len) = ".adb"
+ then
+ Name_Buffer (Name_Len) := 's';
+
+ -- Change .2.ada to .1.ada (Rational convention)
+
+ elsif Name_Len >= 7
+ and then Name_Buffer (Name_Len - 5 .. Name_Len) = ".2.ada"
+ then
+ Name_Buffer (Name_Len - 4) := '1';
+
+ -- Change .ada to _.ada (DEC convention)
+
+ elsif Name_Len >= 5
+ and then Name_Buffer (Name_Len - 3 .. Name_Len) = ".ada"
+ then
+ Name_Buffer (Name_Len - 3 .. Name_Len + 1) := "_.ada";
+ Name_Len := Name_Len + 1;
+
+ -- No match, don't make the change
+
+ else
+ return;
+ end if;
+
+ -- Try loading the spec
+
+ N := Name_Find;
+ X := Load_Source_File (N);
+
+ -- No change if we did not find the spec
+
+ if X = No_Source_File then
+ return;
+ end if;
+
+ -- Otherwise modify Main_Unit entry to point to spec
+
+ U.Unit_File_Name := N;
+ U.Source_Index := X;
+ end Change_Main_Unit_To_Spec;
+
-------------------------------
-- Create_Dummy_Package_Unit --
-------------------------------
function Create_Dummy_Package_Unit
(With_Node : Node_Id;
- Spec_Name : Unit_Name_Type)
- return Unit_Number_Type
+ Spec_Name : Unit_Name_Type) return Unit_Number_Type
is
Unum : Unit_Number_Type;
Cunit_Entity : Entity_Id;
-- Child package
else
-
- -- Nkind (Name (With_Node)) = N_Expanded_Name
-
Cunit_Entity :=
Make_Defining_Identifier (No_Location,
Chars => Chars (Selector_Name (Name (With_Node))));
Make_Designator (No_Location,
Name => New_Copy_Tree (Prefix (Name (With_Node))),
Identifier => New_Occurrence_Of (Cunit_Entity, No_Location));
-
end if;
Set_Scope (Cunit_Entity, Standard_Standard);
Unum := Units.Last;
Units.Table (Unum) := (
- Cunit => Cunit,
- Cunit_Entity => Cunit_Entity,
- Dependency_Num => 0,
- Dependent_Unit => False,
- Dynamic_Elab => False,
- Error_Location => Sloc (With_Node),
- Expected_Unit => Spec_Name,
- Fatal_Error => True,
- Generate_Code => False,
- Has_RACW => False,
- Ident_String => Empty,
- Loading => False,
- Main_Priority => Default_Main_Priority,
- Serial_Number => 0,
- Source_Index => No_Source_File,
- Unit_File_Name => Get_File_Name (Spec_Name, Subunit => False),
- Unit_Name => Spec_Name,
- Version => 0);
+ Cunit => Cunit,
+ Cunit_Entity => Cunit_Entity,
+ Dependency_Num => 0,
+ Dynamic_Elab => False,
+ Error_Location => Sloc (With_Node),
+ Expected_Unit => Spec_Name,
+ Fatal_Error => True,
+ Generate_Code => False,
+ Has_RACW => False,
+ Is_Compiler_Unit => False,
+ Ident_String => Empty,
+ Loading => False,
+ Main_Priority => Default_Main_Priority,
+ Munit_Index => 0,
+ Serial_Number => 0,
+ Source_Index => No_Source_File,
+ Unit_File_Name => Get_File_Name (Spec_Name, Subunit => False),
+ Unit_Name => Spec_Name,
+ Version => 0);
Set_Comes_From_Source_Default (Save_CS);
Set_Error_Posted (Cunit_Entity);
return Unum;
end Create_Dummy_Package_Unit;
+ -----------------------------
+ -- From_Limited_With_Chain --
+ -----------------------------
+
+ function From_Limited_With_Chain return Boolean is
+ Curr_Num : constant Unit_Number_Type :=
+ Load_Stack.Table (Load_Stack.Last).Unit_Number;
+
+ begin
+ -- True if the current load operation is through a limited_with clause
+ -- and we are not within a loop of regular with_clauses.
+
+ for U in reverse Load_Stack.First .. Load_Stack.Last - 1 loop
+ if Load_Stack.Table (U).Unit_Number = Curr_Num then
+ return False;
+
+ elsif Present (Load_Stack.Table (U).With_Node)
+ and then Limited_Present (Load_Stack.Table (U).With_Node)
+ then
+ return True;
+ end if;
+ end loop;
+
+ return False;
+ end From_Limited_With_Chain;
+
----------------
-- Initialize --
----------------
----------------------
procedure Load_Main_Source is
- Fname : File_Name_Type;
+ Fname : File_Name_Type;
+ Version : Word := 0;
begin
Load_Stack.Increment_Last;
- Load_Stack.Table (Load_Stack.Last) := Main_Unit;
+ Load_Stack.Table (Load_Stack.Last) := (Main_Unit, Empty);
-- Initialize unit table entry for Main_Unit. Note that we don't know
-- the unit name yet, that gets filled in when the parser parses the
Units.Table (Main_Unit).Unit_File_Name := Fname;
if Fname /= No_File then
-
Main_Source_File := Load_Source_File (Fname);
Current_Error_Source_File := Main_Source_File;
+ if Main_Source_File /= No_Source_File then
+ Version := Source_Checksum (Main_Source_File);
+ end if;
+
Units.Table (Main_Unit) := (
- Cunit => Empty,
- Cunit_Entity => Empty,
- Dependency_Num => 0,
- Dependent_Unit => True,
- Dynamic_Elab => False,
- Error_Location => No_Location,
- Expected_Unit => No_Name,
- Fatal_Error => False,
- Generate_Code => False,
- Has_RACW => False,
- Loading => True,
- Ident_String => Empty,
- Main_Priority => Default_Main_Priority,
- Serial_Number => 0,
- Source_Index => Main_Source_File,
- Unit_File_Name => Fname,
- Unit_Name => No_Name,
- Version => Source_Checksum (Main_Source_File));
+ Cunit => Empty,
+ Cunit_Entity => Empty,
+ Dependency_Num => 0,
+ Dynamic_Elab => False,
+ Error_Location => No_Location,
+ Expected_Unit => No_Unit_Name,
+ Fatal_Error => False,
+ Generate_Code => False,
+ Has_RACW => False,
+ Is_Compiler_Unit => False,
+ Ident_String => Empty,
+ Loading => True,
+ Main_Priority => Default_Main_Priority,
+ Munit_Index => 0,
+ Serial_Number => 0,
+ Source_Index => Main_Source_File,
+ Unit_File_Name => Fname,
+ Unit_Name => No_Unit_Name,
+ Version => Version);
end if;
end Load_Main_Source;
---------------
function Load_Unit
- (Load_Name : Unit_Name_Type;
- Required : Boolean;
- Error_Node : Node_Id;
- Subunit : Boolean;
- Corr_Body : Unit_Number_Type := No_Unit;
- Renamings : Boolean := False)
- return Unit_Number_Type
+ (Load_Name : Unit_Name_Type;
+ Required : Boolean;
+ Error_Node : Node_Id;
+ Subunit : Boolean;
+ Corr_Body : Unit_Number_Type := No_Unit;
+ Renamings : Boolean := False;
+ With_Node : Node_Id := Empty) return Unit_Number_Type
is
Calling_Unit : Unit_Number_Type;
Uname_Actual : Unit_Name_Type;
Fname : File_Name_Type;
Src_Ind : Source_File_Index;
- procedure Set_Load_Unit_Dependency (U : Unit_Number_Type);
- -- Sets the Dependent_Unit flag unless we have a predefined unit
- -- being loaded in High_Integrity_Mode. In this case we do not want
- -- to create a dependency, since we have loaded the unit only
- -- to inline stuff from it. If this is not the case, an error
- -- message will be issued in Rtsfind in any case.
-
- ------------------------------
- -- Set_Load_Unit_Dependency --
- ------------------------------
-
- procedure Set_Load_Unit_Dependency (U : Unit_Number_Type) is
- begin
- -- Differentiate between pragma No_Run_Time mode (that can be
- -- used with a standard installation), and HI-E mode which comes
- -- with a special installation.
-
- -- For Configurable_Run_Time_Mode set by a pragma, we do not want to
- -- create a dependency since the binder would generate references to
- -- these units. In the case of configurable run-time, we do want to
- -- establish this dependency.
-
- if Configurable_Run_Time_Mode
- and then not Configurable_Run_Time_On_Target
- and then not Debug_Flag_YY
- and then Is_Internal_File_Name (Unit_File_Name (U))
- then
- null;
- else
- Units.Table (U).Dependent_Unit := True;
- end if;
- end Set_Load_Unit_Dependency;
-
-- Start of processing for Load_Unit
begin
-- If parent is a renaming, then we use the renamed package as
-- the actual parent for the subsequent load operation.
- if Nkind (Parent (Cunit_Entity (Unump))) =
- N_Package_Renaming_Declaration
- then
+ if Nkind (Unit (Cunit (Unump))) = N_Package_Renaming_Declaration then
Uname_Actual :=
New_Child
- (Load_Name,
- Get_Unit_Name (Name (Parent (Cunit_Entity (Unump)))));
+ (Load_Name, Get_Unit_Name (Name (Unit (Cunit (Unump)))));
-- Save the renaming entity, to establish its visibility when
-- installing the context. The implicit with is on this entity,
Par := Prefix (Par);
end loop;
- if Nkind (Par) = N_Selected_Component then
- -- some intermediate parent is a renaming.
+ -- Case of some intermediate parent is a renaming
+ if Nkind (Par) = N_Selected_Component then
Set_Entity (Selector_Name (Par), Cunit_Entity (Unump));
- else
- -- the ultimate parent is a renaming.
+ -- Case where the ultimate parent is a renaming
+ else
Set_Entity (Par, Cunit_Entity (Unump));
end if;
end;
-- Note: Unit_Name (Main_Unit) is not set if we are parsing gnat.adc.
if Present (Error_Node)
- and then Unit_Name (Main_Unit) /= No_Name
+ and then Unit_Name (Main_Unit) /= No_Unit_Name
then
-- It seems like In_Extended_Main_Source_Unit (Error_Node) would
-- do the trick here, but that's wrong, it is much too early to
-- If the load is called from a with_type clause, the error
-- node is correct.
- elsif Nkind (Parent (Error_Node)) = N_With_Type_Clause then
- Load_Msg_Sloc := Sloc (Error_Node);
-
-- Otherwise, check for the subunit case, and if so, consider
-- we have a match if one name is a prefix of the other name.
-- then we have the problem that the file does not contain the unit that
-- is needed. We simply treat this as a file not found condition.
- if Unum > Units.Last then
+ -- We skip this test in multiple unit per file mode since in this
+ -- case we can have multiple units from the same source file.
+
+ if Unum > Units.Last and then Get_Unit_Index (Uname_Actual) = 0 then
for J in Units.First .. Units.Last loop
if Fname = Units.Table (J).Unit_File_Name then
if Debug_Flag_L then
end if;
if Present (Error_Node) then
-
if Is_Predefined_File_Name (Fname) then
- Error_Msg_Name_1 := Uname_Actual;
+ Error_Msg_Unit_1 := Uname_Actual;
Error_Msg
- ("% is not a language defined unit", Load_Msg_Sloc);
+ ("$$ is not a language defined unit", Load_Msg_Sloc);
else
- Error_Msg_Name_1 := Fname;
+ Error_Msg_File_1 := Fname;
Error_Msg_Unit_1 := Uname_Actual;
- Error_Msg
- ("File{ does not contain unit$", Load_Msg_Sloc);
+ Error_Msg ("File{ does not contain unit$", Load_Msg_Sloc);
end if;
Write_Dependency_Chain;
end loop;
end if;
- -- If we are proceeding with load, then make load stack entry
+ -- If we are proceeding with load, then make load stack entry,
+ -- and indicate the kind of with_clause responsible for the load.
Load_Stack.Increment_Last;
- Load_Stack.Table (Load_Stack.Last) := Unum;
+ Load_Stack.Table (Load_Stack.Last) := (Unum, With_Node);
-- Case of entry already in table
-- legitimately occurs (e.g. two package bodies that contain
-- inlined subprogram referenced by the other).
- -- We also ignore limited_with clauses, because their purpose is
- -- precisely to create legal circular structures.
+ -- Ada 2005 (AI-50217): We also ignore limited_with clauses, because
+ -- their purpose is precisely to create legal circular structures.
if Loading (Unum)
and then (Is_Spec_Name (Units.Table (Unum).Unit_Name)
or else Acts_As_Spec (Units.Table (Unum).Cunit))
and then (Nkind (Error_Node) /= N_With_Clause
or else not Limited_Present (Error_Node))
-
+ and then not From_Limited_With_Chain
then
if Debug_Flag_L then
Write_Str (" circular dependency encountered");
end if;
Load_Stack.Decrement_Last;
- Set_Load_Unit_Dependency (Unum);
return Unum;
- -- File is not already in table, so try to open it
+ -- Unit is not already in table, so try to open the file
else
if Debug_Flag_L then
if Src_Ind /= No_Source_File then
Units.Table (Unum) := (
- Cunit => Empty,
- Cunit_Entity => Empty,
- Dependency_Num => 0,
- Dependent_Unit => False,
- Dynamic_Elab => False,
- Error_Location => Sloc (Error_Node),
- Expected_Unit => Uname_Actual,
- Fatal_Error => False,
- Generate_Code => False,
- Has_RACW => False,
- Ident_String => Empty,
- Loading => True,
- Main_Priority => Default_Main_Priority,
- Serial_Number => 0,
- Source_Index => Src_Ind,
- Unit_File_Name => Fname,
- Unit_Name => Uname_Actual,
- Version => Source_Checksum (Src_Ind));
+ Cunit => Empty,
+ Cunit_Entity => Empty,
+ Dependency_Num => 0,
+ Dynamic_Elab => False,
+ Error_Location => Sloc (Error_Node),
+ Expected_Unit => Uname_Actual,
+ Fatal_Error => False,
+ Generate_Code => False,
+ Has_RACW => False,
+ Is_Compiler_Unit => False,
+ Ident_String => Empty,
+ Loading => True,
+ Main_Priority => Default_Main_Priority,
+ Munit_Index => 0,
+ Serial_Number => 0,
+ Source_Index => Src_Ind,
+ Unit_File_Name => Fname,
+ Unit_Name => Uname_Actual,
+ Version => Source_Checksum (Src_Ind));
-- Parse the new unit
- Initialize_Scanner (Unum, Source_Index (Unum));
- Discard_List (Par (Configuration_Pragmas => False));
- Set_Loading (Unum, False);
+ declare
+ Save_Index : constant Nat := Multiple_Unit_Index;
+ begin
+ Multiple_Unit_Index := Get_Unit_Index (Uname_Actual);
+ Units.Table (Unum).Munit_Index := Multiple_Unit_Index;
+ Initialize_Scanner (Unum, Source_Index (Unum));
+ Discard_List (Par (Configuration_Pragmas => False));
+ Multiple_Unit_Index := Save_Index;
+ Set_Loading (Unum, False);
+ end;
-- If spec is irrelevant, then post errors and quit
if Corr_Body /= No_Unit
and then Spec_Is_Irrelevant (Unum, Corr_Body)
then
- Error_Msg_Name_1 := Unit_File_Name (Corr_Body);
+ Error_Msg_File_1 := Unit_File_Name (Corr_Body);
Error_Msg
- ("cannot compile subprogram in file {!",
- Load_Msg_Sloc);
- Error_Msg_Name_1 := Unit_File_Name (Unum);
+ ("cannot compile subprogram in file {!", Load_Msg_Sloc);
+ Error_Msg_File_1 := Unit_File_Name (Unum);
Error_Msg
- ("incorrect spec in file { must be removed first!",
+ ("\incorrect spec in file { must be removed first!",
Load_Msg_Sloc);
return No_Unit;
end if;
-- Remove load stack entry and return the entry in the file table
Load_Stack.Decrement_Last;
- Set_Load_Unit_Dependency (Unum);
return Unum;
-- Case of file not found
-- Generate message if unit required
if Required and then Present (Error_Node) then
-
if Is_Predefined_File_Name (Fname) then
- Error_Msg_Name_1 := Uname_Actual;
+
+ -- This is a predefined library unit which is not present
+ -- in the run time. If a predefined unit is not available
+ -- it may very likely be the case that there is also pragma
+ -- Restriction forbidding its usage. This is typically the
+ -- case when building a configurable run time, where the
+ -- usage of certain run-time units units is restricted by
+ -- means of both the corresponding pragma Restriction (such
+ -- as No_Calendar), and by not including the unit. Hence,
+ -- we check whether this predefined unit is forbidden, so
+ -- that the message about the restriction violation is
+ -- generated, if needed.
+
+ Check_Restricted_Unit (Load_Name, Error_Node);
+
+ Error_Msg_Unit_1 := Uname_Actual;
Error_Msg
- ("% is not a predefined library unit", Load_Msg_Sloc);
+ ("$$ is not a predefined library unit", Load_Msg_Sloc);
else
- Error_Msg_Name_1 := Fname;
+ Error_Msg_File_1 := Fname;
Error_Msg ("file{ not found", Load_Msg_Sloc);
end if;
procedure Make_Instance_Unit (N : Node_Id) is
Sind : constant Source_File_Index := Source_Index (Main_Unit);
-
begin
Units.Increment_Last;
-
Units.Table (Units.Last) := Units.Table (Main_Unit);
Units.Table (Units.Last).Cunit := Library_Unit (N);
Units.Table (Units.Last).Generate_Code := True;
-
Units.Table (Main_Unit).Cunit := N;
Units.Table (Main_Unit).Unit_Name :=
Get_Body_Name (Unit_Name (Get_Cunit_Unit_Number (Library_Unit (N))));
function Spec_Is_Irrelevant
(Spec_Unit : Unit_Number_Type;
- Body_Unit : Unit_Number_Type)
- return Boolean
+ Body_Unit : Unit_Number_Type) return Boolean
is
Sunit : constant Node_Id := Cunit (Spec_Unit);
Bunit : constant Node_Id := Cunit (Body_Unit);
Nkind (Unit (Bunit)) = N_Subprogram_Body
and then Nkind (Unit (Sunit)) /= N_Subprogram_Declaration
and then Nkind (Unit (Sunit)) /= N_Generic_Subprogram_Declaration;
-
end Spec_Is_Irrelevant;
--------------------
procedure Version_Update (U : Node_Id; From : Node_Id) is
Unum : constant Unit_Number_Type := Get_Cunit_Unit_Number (U);
Fnum : constant Unit_Number_Type := Get_Cunit_Unit_Number (From);
-
begin
-
if Source_Index (Fnum) /= No_Source_File then
Units.Table (Unum).Version :=
Units.Table (Unum).Version
if Load_Stack.Last - 1 > Load_Stack.First then
for U in Load_Stack.First .. Load_Stack.Last - 1 loop
- Error_Msg_Unit_1 := Unit_Name (Load_Stack.Table (U));
- Error_Msg_Unit_2 := Unit_Name (Load_Stack.Table (U + 1));
+ Error_Msg_Unit_1 :=
+ Unit_Name (Load_Stack.Table (U).Unit_Number);
+ Error_Msg_Unit_2 :=
+ Unit_Name (Load_Stack.Table (U + 1).Unit_Number);
Error_Msg ("$ depends on $!", Load_Msg_Sloc);
end loop;
end if;
OSDN Git Service
