+2010-01-28 Robert Dewar <dewar@adacore.com>
+
+ * gnat_rm.texi: Minor correction
+
+2010-01-27 Pascal Obry <obry@adacore.com>
+
+ * g-awk.adb: ensure that an AWK session is reusable.
+
+2010-01-27 Vasiliy Fofanov <fofanov@adacore.com>
+
+ * g-regist.adb (For_Every_Key): Fix previous change.
+ Minor reformatting.
+
+2010-01-27 Thomas Quinot <quinot@adacore.com>
+
+ * lib-writ.ads: Current version of spec for new N (note) ALI lines
+
+2010-01-27 Yannick Moy <moy@adacore.com>
+
+ * a-cdlili.adb (Insert): Correct exception message when cursor
+ designates wrong list.
+
+2010-01-27 Vincent Celier <celier@adacore.com>
+
+ * gnatcmd.adb: When there is only one main specified, the package
+ support Switches (<main>) and attribute Switches is specified for the
+ main, use these switches, instead of Default_Switches ("Ada").
+
+2010-01-27 Robert Dewar <dewar@adacore.com>
+
+ * sem_prag.adb, par-prag.adb, snames.ads-tmpl: pragma Dimension initial
+ implementation.
+ * exp_disp.adb: Minor reformatting
+
+2010-01-27 Tristan Gingold <gingold@adacore.com>
+
+ * seh_init.c: Use __ImageBase instead of _ImageBase.
+
+2010-01-27 Javier Miranda <miranda@adacore.com>
+
+ * exp_disp.ads, exp_disp.adb (Expand_Interface_Thunk): Modify the
+ profile of interface thunks. The type of the controlling formal is now
+ the covered interface type (instead of the target tagged type).
+
+2010-01-27 Sergey Rybin <rybin@adacore.com>
+
+ * gnat_rm.texi, gnat_ugn.texi: Update gnatcheck doc.
+
+2010-01-27 Robert Dewar <dewar@adacore.com>
+
+ * sinput.ads, sinput.adb (Sloc_Range): Applies to all nodes, formal
+ changed from Expr to N.
+
+2010-01-26 Thomas Quinot <quinot@adacore.com>
+
+ * gnat_ugn.texi: Adjust documentation of -gnatz switches.
+ * usage.adb: Replace line for -gnatz with two lines for -gnatzc and
+ -gnatzr.
+
+2010-01-26 Vincent Celier <celier@adacore.com>
+
+ * prj-attr.adb: Add new attribute Library_Install_Name_Option
+ Replace attribute Run_Path_Origin_Supported with Run_Path_Origin
+ * prj-nmsc.adb (Process_Project_Level_Simple_Attributes): Process
+ attributes Run_Path_Option and Library_Install_Name_Option.
+ * prj.ads (Project_Configuration): Replace component
+ Run_Path_Origin_Supported with component Run_Path_Origin. Add new
+ component Library_Install_Name_Option.
+ * snames.ads-tmpl: Add new standard name Library_Install_Name_Option
+ Replace Run_Path_Origin_Supported with Run_Path_Origin
+
+2010-01-26 Ed Schonberg <schonberg@adacore.com>
+
+ * sem_ch8.adb (Use_One_Package): Within an instance, an actual package
+ is not hidden by a homograph declared in another actual package.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.adb (Traverse_Declarations_Or_Statements): Only generate
+ decisions for pragmas Assert, Check, Precondition, Postcondition if
+ -gnata set.
+ * scos.ads: Update comments.
+ * get_scos.adb, put_scos.adb: Minor fix to code reading statement SCOs.
+ Also remove obsolete code for CT (exit point) SCOs.
+
+2010-01-26 Thomas Quinot <quinot@adacore.com>
+
+ * switch-c.adb: Fix handling of -gnatz*
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.adb (Traverse_Declarations_Or_Statements): Separate F/W
+ qualifiers for FOR/WHILE loops
+ * scos.ads: Use separate type letters F/W for for/while loops
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * get_scos.adb (Get_SCOs): Implement new form of CS entries (multiple
+ entries per line, one for each statement in the sequence).
+ * par_sco.adb (Traverse_Declarations_Or_Statements): Increase array
+ size from 100 to 10_000 for SC_Array to avoid any real possibility of
+ overflow. Output decisions in for loops.
+ Exclude labels from CS lines.
+ * scos.ads: Clarify that label is not included in the entry point
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.adb (Traverse_Declarations_Or_Statments): Implement new
+ format of statement sequence SCO entries (one location/statement).
+ * put_scos.adb (Put_SCOs): Implement new format of CS lines
+ * scos.ads: Update comments.
+ * sem_eval.adb: Minor reformatting.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.ads, par_sco.adb (Set_Statement_Entry): New handling of exits
+ (Extend_Statement_Sequence): New procedures
+ (Traverse_Declarations_Or_Statements): New handling for exits.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.adb (Traverse_Declarations_Or_Statements): Add processing for
+ Case.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * par_sco.adb (Is_Logical_Operator): Exclude AND/OR/XOR
+ * scos.ads: Clarify handling of logical operators
+
+2010-01-26 Arnaud Charlet <charlet@adacore.com>
+
+ * s-tpoben.adb: Update comments.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * freeze.adb (Set_Small_Size): Don't set size if alignment clause
+ present.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * scos.ads: Clean up documentation, remove obsolete XOR references
+2010-01-26 Vincent Celier <celier@adacore.com>
+
+ * gnat_ugn.texi: Complete documentation on the restrictions for
+ combined options in -gnatxxx switches.
+ Fix typo.
+
+2010-01-26 Arnaud Charlet <charlet@adacore.com>
+
+ * s-tpoben.adb (Initialize_Protection_Entries): If a PO is created from
+ a controlled operation, abort is already deferred at this point, so we
+ need to use Defer_Abort_Nestable.
+
+2010-01-26 Vincent Celier <celier@adacore.com>
+
+ * prj-conf.adb (Get_Config_Switches): Check for a default language for
+ a project extending a project with no languages.
+
+2010-01-26 Vincent Celier <celier@adacore.com>
+
+ * switch-c.adb (Scan_Front_End_Switches): Take into account options
+ that follow -gnatef.
+ Allow -gnateG to be followed by other options.
+
+2010-01-26 Robert Dewar <dewar@adacore.com>
+
+ * s-commun.ads, s-osprim-mingw.adb, s-stchop-vxworks.adb, sem_aggr.adb,
+ s-vxwext.adb, sem_ch10.adb, sem_eval.adb, sem_prag.adb: Minor
+ reformatting.
+
+2010-01-26 Vasiliy Fofanov <fofanov@adacore.com>
+
+ * g-regist.adb, g-regist.ads (For_Every_Key): New generic procedure
+ that allows to iterate over all subkeys of a key.
+
+2010-01-26 Ed Falis <falis@adacore.com>
+
+ * sysdep.c: enable NFS for VxWorks MILS
+ * env.c: enable __gnat_environ for VxWorks MILS
+ * gcc-interface/Makefile.in: Add VxWorks MILS target pairs.
+
+2010-01-25 Bob Duff <duff@adacore.com>
+
+ * sem_aggr.adb (Resolve_Array_Aggregate): Check for the case where this
+ is an internally-generated positional aggregate, and the bounds are
+ already correctly set. We don't want to overwrite those bounds with
+ bounds determined by context.
+
+2010-01-25 Robert Dewar <dewar@adacore.com>
+
+ * g-sercom.ads, gnatcmd.adb, gnatlink.adb, a-ststio.adb, exp_ch6.adb,
+ exp_ch9.adb, g-sechas.ads: Minor reformatting.
+
+2010-01-25 Thomas Quinot <quinot@adacore.com>
+
+ * s-commun.adb (Last_Index): Count must be converted to SEO (a signed
+ integer type) before subtracting 1, otherwise the computation may wrap
+ (because size_t is modular) and cause the conversion to fail.
+
+2010-01-25 Ed Falis <falis@adacore.com>
+
+ * sysdep.c, init.c: Adapt to support full run-time on VxWorks MILS.
+
+2010-01-25 Vincent Celier <celier@adacore.com>
+
+ * prj-attr.adb: New attribute Run_Path_Origin_Required
+ * prj-nmsc.adb (Process_Project_Level_Simple_Attributes): Process new
+ attribute Run_Path_Origin_Required.
+ * prj.ads (Project_Configuration): New component
+ Run_Path_Origin_Supported.
+ * snames.ads-tmpl: New standard name Run_Path_Origin_Required
+
+2010-01-25 Ed Schonberg <schonberg@adacore.com>
+
+ * sem_aggr.adb (Resolve_Array_Aggregate): If the bounds in a choice
+ have errors, do not continue resolution of the aggregate.
+ * sem_eval.adb (Eval_Indexed_Component): Do not attempt to evaluate if
+ the array type indicates an error.
+
+2010-01-25 Bob Duff <duff@adacore.com>
+
+ * sinfo.ads: Minor comment fixes.
+
+2010-01-25 Bob Duff <duff@adacore.com>
+
+ * exp_ch4.adb, exp_aggr.adb: Minor comment fixes and code clean up.
+
+2010-01-25 Arnaud Charlet <charlet@adacore.com>
+
+ * gnatvsn.ads (Current_Year): Update.
+
+2010-01-25 Florian Villoing <villoing@adacore.com>
+
+ * gnat_ugn.texi: Fix typo.
+
+2010-01-25 Thomas Quinot <quinot@adacore.com>
+
+ * scos.ads: Update specification.
+
+2010-01-25 Ed Schonberg <schonberg@adacore.com>
+
+ * sem_ch6.adb (Process_PPCs): If a postcondition is present and the
+ enclosing subprogram has no previous spec, attach postcondition
+ procedure to the defining entity for the body.
+
+2010-01-25 Ed Schonberg <schonberg@adacore.com>
+
+ * exp_aggr.adb (Build_Record_Aggr_Code); Do not generate call to
+ initialization procedure of the ancestor part of an extension aggregate
+ if it is an interface type.
+
+2010-01-25 Vincent Celier <celier@adacore.com>
+
+ * gnatlink.adb (Process_Binder_File): The directory for the shared
+ version of libgcc in the run path options is found in the subdirectory
+ indicated by __gnat_default_libgcc_subdir.
+ * link.c: Declare new const char * __gnat_default_libgcc_subdir for
+ each platform.
+
+2010-01-25 Ed Schonberg <schonberg@adacore.com>
+
+ * sem_prag.adb: More flexible pragma Annotate.
+
+2010-01-22 Eric Botcazou <ebotcazou@adacore.com>
+
+ * system-linux-armel.ads (Stack_Check_Probes): Set to True.
+ * system-linux-armeb.ads (Stack_Check_Probes): Likewise.
+
+2010-01-18 Eric Botcazou <ebotcazou@adacore.com>
+
+ * gcc-interface/utils.c (create_var_decl_1): Fix formatting nits.
+
2010-01-18 Jan Hubicka <jh@suse.cz>
PR middle-end/42068
OSDN Git Service
