# Selection of languages to be made.
# This is overridden by configure.
CONFIG_LANGUAGES = @all_languages@
-LANGUAGES = c proto gcov$(exeext) $(CONFIG_LANGUAGES)
+LANGUAGES = c gcov$(exeext) $(CONFIG_LANGUAGES)
# Languages should create dependencies of $(INTL_TARGETS) on generated
# sources in Make-lang.in. Example:
ALLOCA_FLAGS =
ALLOCA_FINISH = true
-# Various ways of specifying flags for compilations:
+# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
-# WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
+# WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
# (And for stage 1 if the native compiler is GCC.) It is
# separate from BOOT_CFLAGS because people tend to override optimization
# flags and we'd like them to still have warnings turned on. They are free
@SET_MAKE@
# Define this as & to perform parallel make on a Sequent.
-# Note that this has some bugs, and it seems currently necessary
+# Note that this has some bugs, and it seems currently necessary
# to compile all the gen* files first by hand to avoid erroneous results.
P =
# Header files that are made available under the same name
# to programs compiled with GCC.
USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
- $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
- $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
- $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
- $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-mn10200.h \
- $(srcdir)/ginclude/va-mn10300.h $(srcdir)/ginclude/va-pa.h \
- $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
- $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
- $(srcdir)/ginclude/va-m32r.h $(srcdir)/ginclude/va-sh.h \
- $(srcdir)/ginclude/va-v850.h $(srcdir)/ginclude/va-arc.h \
- $(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
- $(srcdir)/ginclude/va-c4x.h $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS) \
- $(srcdir)/ginclude/proto.h $(srcdir)/ginclude/stdbool.h
+ $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/proto.h \
+ $(srcdir)/ginclude/stdbool.h $(srcdir)/ginclude/iso646.h \
+ $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS)
# Target to use whe installing assert.h. Some systems may
# want to set this empty.
# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
-GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/
+GCC_FOR_TARGET = ./xgcc -B$(build_tooldir)/bin/ -B./ -I$(build_tooldir)/include
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# Test to see whether <limits.h> exists in the system header files.
LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
-# There may be a premade insn-attrtab.c for this machine.
-# (You could rebuild it with genattrtab as usual, but it takes a long time.)
-# PREMADE_ATTRTAB is the file name of the file to use.
-# PREMADE_ATTRTAB_MD is the md file it corresponds to.
-PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md.
-PREMADE_ATTRTAB =
-
target=@target@
target_alias=@target_alias@
xmake_file=@dep_host_xmake_file@
lang_tree_files=@lang_tree_files@
GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
-JAVAGC=@JAVAGC@
GTHREAD_FLAGS=@gthread_flags@
# Be prepared for gcc2 merges.
gcc_version=@gcc_version@
# system library.
OBSTACK=obstack.o
+# The GC method to be used on this system.
+GGC=@GGC@.o
+
+# If a supplementary library is being used for the GC.
+GGC_LIB=
+
# Configure will set these if you need vfprintf and possibly _doprnt support.
VFPRINTF=@vfprintf@
DOPRINT=@doprint@
# so that -g1 will be tested.
#
LIBGCC2_DEBUG_CFLAGS = -g1
-LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
+LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
LIBGCC2_INCLUDES =
# Additional target-dependent options for compiling libgcc2.a.
-TARGET_LIBGCC2_CFLAGS =
+TARGET_LIBGCC2_CFLAGS =
# Things which must be built before building libgcc2.a.
# Some targets override this to stmp-int-hdrs
# Set this to `collect2' to enable use of collect2.
USE_COLLECT2 = @will_use_collect2@
+# If we might be using collect2, then this variable will be set to
+# -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
+# if we may be using collect2.
MAYBE_USE_COLLECT2 = @maybe_use_collect2@
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
# List of extra C and assembler files to add to libgcc1.a.
# Assembler files should have names ending in `.asm'.
-LIB1FUNCS_EXTRA =
+LIB1FUNCS_EXTRA =
# List of extra C and assembler files to add to libgcc2.a.
# Assembler files should have names ending in `.asm'.
-LIB2FUNCS_EXTRA =
+LIB2FUNCS_EXTRA =
# Handle cpp installation.
INSTALL_CPP=
FLOAT_H=@float_h_file@
# Program to convert libraries.
-LIBCONVERT =
+LIBCONVERT =
# Control whether header files are installed.
INSTALL_HEADERS=install-headers
-# Options for tar when copying trees. So HPUX can override it.
-TAROUTOPTS = xpBf
-
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
-# *Do not* use this for directories that happen to contain
+# *Do not* use this for directories that happen to contain
# header files, but are not searched automatically by default.
# On most systems, this is empty.
OTHER_FIXINCLUDES_DIRS=
HOST_PREFIX=
# Prefix to apply to names of object files when compiling them
# to run on the machine we are compiling on.
-# The default for this variable is chosen to keep these rules
+# The default for this variable is chosen to keep these rules
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
RUNTESTFLAGS =
# Extra symbols for fixproto to define when parsing headers.
-FIXPROTO_DEFINES =
+FIXPROTO_DEFINES =
# Extra flags to use when compiling crt{begin,end}.o.
-CRTSTUFF_T_CFLAGS =
+CRTSTUFF_T_CFLAGS =
# Extra flags to use when compiling [m]crt0.o.
-CRT0STUFF_T_CFLAGS =
+CRT0STUFF_T_CFLAGS =
# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
T =
all.indirect: $(ALL)
# IN_GCC tells various files that system.h, toplev.c, etc are available.
-INTERNAL_CFLAGS = $(CROSS) -DIN_GCC $(SCHED_CFLAGS) @extra_c_flags@
+INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@
# This is the variable actually used when we compile.
# If you change this line, you probably also need to change the definition
$(HOST_INTLLIBS) $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) \
$(HOST_CLIB)
-HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o
+HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o $(HOST_PREFIX)ggc-none.o
HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
+HOST_ERRORS = $(HOST_PREFIX)errors.o
# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
-SCHED_PREFIX = @sched_prefix@
-SCHED_CFLAGS = @sched_cflags@
-
# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
- function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
- intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \
+ function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
+ builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
- insn-peep.o reorg.o $(SCHED_PREFIX)sched.o final.o recog.o reg-stack.o \
+ insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
- profile.o insn-attrtab.o $(out_object_file) getpwd.o $(EXTRA_OBJS) convert.o \
- mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o
+ profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
+ mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
+ lists.o ggc-common.o $(GGC)
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
- s-flags s-config s-codes s-mlib s-under\
+ s-flags s-config s-codes s-mlib s-unders s-genrtl \
s-output s-recog s-emit s-extract s-peep s-check \
s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
gcov$(exeext) *.bp \
*.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
- *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse *.flow2 \
+ *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse *.flow2 *.peephole2 \
*.[si] libcpp.a \
$(LANG_STAGESTUFF)
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
_lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
- _sf_to_df
+ _sf_to_df _thenan_sf
DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
_fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
_lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
- _df_to_sf
+ _df_to_sf _thenan_df
# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# If it is, rm *.o is an easy way to do it.
# CONFIG_H = $(host_xm_file) $(tm_file)
CONFIG_H =
-RTL_BASE_H = rtl.h rtl.def machmode.h machmode.def
+MACHMODE_H = machmode.h machmode.def
+RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
RTL_H = $(RTL_BASE_H) genrtl.h
-TREE_H = tree.h real.h tree.def machmode.h machmode.def tree-check.h
+TREE_H = tree.h real.h tree.def $(MACHMODE_H) tree-check.h
BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h
DEMANGLE_H = $(srcdir)/../include/demangle.h
RECOG_H = recog.h
EXPR_H = expr.h insn-codes.h
-REGS_H = regs.h varray.h machmode.h machmode.def
+REGS_H = regs.h varray.h $(MACHMODE_H)
#\f
# Language makefile fragments.
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# config.status does not exist before failing.
-config.status: configure version.c
+config.status: $(srcdir)/configure version.c
@if [ ! -f config.status ] ; then \
echo You must configure gcc. Look at the INSTALL file for details.; \
false; \
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
-all.cross: native gcc-cross specs stmp-headers $(STMP_FIXPROTO) $(LIBGCC) \
- $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc
+all.cross: native gcc-cross xcpp$(exeext) specs stmp-headers $(STMP_FIXPROTO) \
+ $(LIBGCC) $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc$(exeext) xcpp$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
# Create a list of the language-independent object files so the language
# subdirectories needn't mention their names explicitly.
-stamp-objlist: $(OBJS)
+stamp-objlist: $(OBJS)
echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
# We call this executable `xgcc' rather than `gcc'
rm -f dummy$(objext) dummy.c
# This is $(LIBGCC1) for a cross-compiler.
-# We have no automatic way of building libgcc1.a,
+# We have no automatic way of building libgcc1.a,
# so it's up to the installer to find a way to do that.
# This rule deliberately does not depend on libgcc1.a
# so that it will fail if the installer hasn't provided it.
LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \
- machmode.h longlong.h frame.h gbl-ctors.h config.status
+ $(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
-rm -f tmplibgcc2.a
do \
echo $${name}; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
- $(srcdir)/libgcc2.c -o $${name}$(objext); \
+ $(MAYBE_USE_COLLECT2) $(srcdir)/libgcc2.c -o $${name}$(objext); \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
$(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
rm -f $${name}$(objext); \
"$(MULTILIB_MATCHES)" \
"$(MULTILIB_EXCEPTIONS)" \
"$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
- $(srcdir)/move-if-change tmp-mlib.h multilib.h
+ $(SHELL) $(srcdir)/move-if-change tmp-mlib.h multilib.h
touch s-mlib
# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
frame.h \
- $(LIB2ADD) machmode.h longlong.h gbl-ctors.h config.status
+ $(LIB2ADD) $(MACHMODE_H) longlong.h gbl-ctors.h config.status
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
then (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC1)); \
else true; \
fi
+# Some versions of ar (specifically the one in RISC/os 5.x), create an
+# unwritable table of contents file, and then print an error message when
+# the second ar command tries to overwrite this file. To avoid the error
+# message from ar, we make sure all files are writable.
+ -(cd tmpcopy; chmod +w * > /dev/null 2>&1)
(cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC2))
(cd tmpcopy; $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) ../tmplibgcc.a *$(objext))
rm -rf libgcc2.a tmpcopy
defaults.h frame.h gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_BEGIN -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
- -fno-exceptions -g0 -c $(srcdir)/crtstuff.c
+ -fno-exceptions -g0 -c $(srcdir)/crtstuff.c
mv crtstuff$(objext) crtbeginS$(objext)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_END -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
# C language specific files.
-c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
- $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
+c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h ggc.h \
+ $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
-e "/^ifc$$/d" -e "/^end ifc$$/d" \
$(srcdir)/c-parse.in >>tmp-c-parse.y
- $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
+ $(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
$(srcdir)/c-gperf.h: c-parse.gperf
gperf -L C -F ', 0, 0' -p -j1 -i 1 -g -o -t -G -N is_reserved_word \
- -k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h
- $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
-
-c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h flags.h \
- output.h toplev.h
-c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
- intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
-c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h toplev.h \
- output.h
+ -k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h || ( \
+ echo "Please update your 'gperf' from the GCC infrastructure" >&2 ; \
+ echo " ftp://sourceware.cygnus.com/pub/egcs/infrastructure/gperf*" >&2 ; \
+ exit 1 )
+ $(SHELL) $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
+
+c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
+ c-lex.h flags.h function.h output.h toplev.h defaults.h
+c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
+ flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
+c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
+ c-lex.h toplev.h output.h function.h
c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
- $(srcdir)/c-parse.h input.h intl.h flags.h $(srcdir)/c-gperf.h c-pragma.h \
- toplev.h output.h mbchar.h
-c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
- toplev.h
+ c-common.h $(srcdir)/c-parse.h $(srcdir)/c-gperf.h c-pragma.h input.h \
+ intl.h flags.h toplev.h output.h mbchar.h ggc.h
+c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h \
+ c-common.h flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
-c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) except.h \
- function.h defaults.h c-pragma.h toplev.h
+c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) function.h \
+ defaults.h c-pragma.h toplev.h ggc.h
c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
- flags.h toplev.h $(EXPR_H)
+ c-common.h flags.h toplev.h $(EXPR_H)
mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h
graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \
- hard-reg-set.h $(BASIC_BLOCK_H)
+ function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H)
-COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o
+COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
-rm -f collect2$(exeext)
-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
-tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h toplev.h collect2.h
+tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h
hash.o: hash.c hash.h system.h toplev.h
vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h
else \
echo "int prepends_underscore = 0;" >>tmp-under.c; \
fi
- $(srcdir)/move-if-change tmp-under.c underscore.c
+ $(SHELL) $(srcdir)/move-if-change tmp-under.c underscore.c
-rm -f tmp-dum.c tmp-dum.s
touch s-under
# A file used by all variants of C.
c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
- flags.h toplev.h output.h c-pragma.h $(RTL_H)
+ c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) ggc.h
# Language-independent files.
-DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
-DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\"
gcc.o: gcc.c $(CONFIG_H) system.h intl.h multilib.h \
- Makefile $(lang_specs_files) prefix.h
+ Makefile $(lang_specs_files) prefix.h gcc.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) \
-c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
-gccspec.o: gccspec.c $(CONFIG_H) system.h
-cppspec.o: cppspec.c $(CONFIG_H) system.h
+gccspec.o: gccspec.c $(CONFIG_H) system.h gcc.h
+cppspec.o: cppspec.c $(CONFIG_H) system.h gcc.h
tree-check.h: s-check ; @true
s-check : gencheck $(srcdir)/move-if-change
./gencheck > tmp-check.h
- $(srcdir)/move-if-change tmp-check.h tree-check.h
+ $(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h
touch s-check
gencheck : gencheck.o $(lang_tree_files) $(HOST_LIBDEPS)
dumpvers: dumpvers.c
version.o: version.c
+
+ggc-common.o: ggc-common.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
+ flags.h ggc.h varray.h hash.h
+
+ggc-simple.o: ggc-simple.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
+ ggc.h varray.h hash.h
+
+ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
+ ggc.h varray.h hash.h
+
+ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) ggc.h
+
+ggc-callbacks.o: ggc-callbacks.c $(CONFIG_H) $(RTL_H) $(TREE_H) ggc.h
+
obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H)
rm -f obstack.c
$(LN_S) $(srcdir)/../libiberty/obstack.c obstack.c
-DPREFIX=\"$(prefix)\" \
-c `echo $(srcdir)/prefix.c | sed 's,^\./,,'`
-convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h toplev.h
+convert.o: convert.c $(CONFIG_H) system.h $(TREE_H) flags.h convert.h toplev.h
-tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h except.h
-print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H)
+tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h \
+ ggc.h
+print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) ggc.h
stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
- function.h $(EXPR_H) $(RTL_H) toplev.h except.h
+ function.h $(EXPR_H) $(RTL_H) toplev.h ggc.h
fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \
- $(RTL_H)
-toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) \
+ $(RTL_H) ggc.h
+toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) function.h \
flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
- dwarf2out.h sdbout.h dbxout.h $(EXPR_H) $(BASIC_BLOCK_H) \
+ dwarf2out.h sdbout.h dbxout.h $(EXPR_H) $(BASIC_BLOCK_H) graph.h \
$(lang_options_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
-DTARGET_NAME=\"$(target_alias)\" \
-c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
-rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
+rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h ggc.h
print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h basic-block.h
rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
+errors.o : errors.c $(CONFIG_H) system.h errors.h
varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
- xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
+ xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h
+ insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h ggc.h
stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \
- loop.h $(RECOG_H) toplev.h output.h varray.h
+ loop.h $(RECOG_H) toplev.h output.h varray.h ggc.h
except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h except.h toplev.h
+ insn-config.h $(RECOG_H) output.h except.h toplev.h intl.h ggc.h
expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
$(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) \
- output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
+ output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
+ ggc.h
+builtins.o : builtins.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ function.h $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h \
+ $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
+ except.h
calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
insn-flags.h $(REGS_H) toplev.h output.h
expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-codes.h toplev.h
optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h \
- toplev.h
+ toplev.h ggc.h
dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
toplev.h
xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
flags.h toplev.h output.h dbxout.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- except.h function.h $(REGS_H) insn-config.h $(RECOG_H) real.h \
+ function.h $(REGS_H) insn-config.h $(RECOG_H) real.h ggc.h \
$(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h
real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
-getpwd.o : getpwd.c $(CONFIG_H) system.h
-
integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
integrate.h insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \
- intl.h function.h output.h $(RECOG_H) except.h toplev.h
-
+ intl.h function.h output.h $(RECOG_H) except.h toplev.h loop.h
jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
- insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h \
+ insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
toplev.h insn-attr.h
stupid.o : stupid.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
- $(BASIC_BLOCK_H) insn-config.h reload.h flags.h toplev.h
+ $(BASIC_BLOCK_H) insn-config.h reload.h flags.h function.h toplev.h
cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h \
+ real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h \
$(srcdir)/../include/splay-tree.h
gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
- output.h toplev.h
+ function.h output.h toplev.h
resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \
- $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h toplev.h
+ $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h
lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \
- gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h insn-config.h
+ gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h function.h insn-config.h \
+ ggc.h
loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h loop.h insn-config.h \
insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
- toplev.h varray.h
-unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
+ function.h toplev.h varray.h
+unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h function.h \
integrate.h $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) loop.h toplev.h varray.h
-flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-config.h \
+flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h recog.h \
- insn-flags.h
-combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h \
+ insn-flags.h function.h
+combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h function.h \
insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \
$(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
- $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h toplev.h \
- output.h
+ $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h \
+ toplev.h function.h output.h ggc.h
local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
- $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) output.h \
- insn-attr.h toplev.h
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
+ output.h function.h insn-attr.h toplev.h
bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
$(REGS_H)
-global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h \
+global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h function.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h
varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h
-
reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h $(EXPR_H) \
reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h $(REGS_H) \
- real.h toplev.h
+ function.h real.h toplev.h
reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h $(EXPR_H) \
reload.h $(REGS_H) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
- $(BASIC_BLOCK_H) $(RECOG_H) output.h toplev.h
+ $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h
caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \
- $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) \
+ $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
$(RECOG_H) reload.h $(EXPR_H) toplev.h
reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
$(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h insn-flags.h \
- $(RECOG_H) flags.h output.h $(EXPR_H) toplev.h
+ $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h
alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
- $(REGS_H) toplev.h output.h $(EXPR_H)
+ $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h
regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
- $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h \
+ $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h function.h \
$(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
-$(SCHED_PREFIX)sched.o : $(SCHED_PREFIX)sched.c $(CONFIG_H) system.h $(RTL_H) \
- $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h \
+haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
insn-attr.h toplev.h recog.h
final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \
- $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h except.h real.h \
- output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \
- defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
-recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) \
+ $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h function.h \
+ real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
+ xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
+ dbxout.h
+recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) function.h \
$(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
- insn-flags.h insn-codes.h real.h toplev.h
+ insn-flags.h insn-codes.h real.h toplev.h output.h resource.h basic-block.h
reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) recog.h \
- $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
+ $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
+ varray.h function.h
dyn-string.o: dyn-string.c dyn-string.h $(CONFIG_H) system.h
+lists.o: lists.c $(CONFIG_H) system.h toplev.h $(RTL_H) ggc.h
-$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
+$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) ggc.h \
$(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
- insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
+ insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
-mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h machmode.h
+mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h
mips-tdump: mips-tdump.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
-c `echo alloca.c | sed 's,^\./,,'`
$(ALLOCA_FINISH)
#\f
-# Generate header and source files from the machine description,
+# Generate header and source files from the machine description,
# and compile them.
.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
insn-config.h: s-config ; @true
s-config : $(md_file) genconfig $(srcdir)/move-if-change
./genconfig $(md_file) > tmp-config.h
- $(srcdir)/move-if-change tmp-config.h insn-config.h
+ $(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h
touch s-config
insn-flags.h: s-flags ; @true
s-flags : $(md_file) genflags $(srcdir)/move-if-change
./genflags $(md_file) > tmp-flags.h
- $(srcdir)/move-if-change tmp-flags.h insn-flags.h
+ $(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
touch s-flags
insn-codes.h: s-codes ; @true
s-codes : $(md_file) gencodes $(srcdir)/move-if-change
./gencodes $(md_file) > tmp-codes.h
- $(srcdir)/move-if-change tmp-codes.h insn-codes.h
+ $(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
touch s-codes
insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \
- insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h
+ insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h function.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
insn-emit.c: s-emit ; @true
s-emit : $(md_file) genemit $(srcdir)/move-if-change
./genemit $(md_file) > tmp-emit.c
- $(srcdir)/move-if-change tmp-emit.c insn-emit.c
+ $(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
touch s-emit
insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \
- real.h output.h flags.h system.h
+ real.h output.h flags.h system.h function.h hard-reg-set.h resource.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
insn-recog.c: s-recog ; @true
s-recog : $(md_file) genrecog $(srcdir)/move-if-change
./genrecog $(md_file) > tmp-recog.c
- $(srcdir)/move-if-change tmp-recog.c insn-recog.c
+ $(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
touch s-recog
insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
insn-opinit.c: s-opinit ; @true
s-opinit : $(md_file) genopinit $(srcdir)/move-if-change
./genopinit $(md_file) > tmp-opinit.c
- $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
+ $(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
touch s-opinit
insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h toplev.h \
insn-extract.c: s-extract ; @true
s-extract : $(md_file) genextract $(srcdir)/move-if-change
./genextract $(md_file) > tmp-extract.c
- $(srcdir)/move-if-change tmp-extract.c insn-extract.c
+ $(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
touch s-extract
insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) $(REGS_H) output.h real.h \
insn-peep.c: s-peep ; @true
s-peep : $(md_file) genpeep $(srcdir)/move-if-change
./genpeep $(md_file) > tmp-peep.c
- $(srcdir)/move-if-change tmp-peep.c insn-peep.c
+ $(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
touch s-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \
insn-attr.h: s-attr ; @true
s-attr : $(md_file) genattr $(srcdir)/move-if-change
./genattr $(md_file) > tmp-attr.h
- $(srcdir)/move-if-change tmp-attr.h insn-attr.h
+ $(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
touch s-attr
insn-attrtab.c: s-attrtab ; @true
s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
- if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \
- then \
- echo Using $(PREMADE_ATTRTAB); \
- cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \
- else \
- ./genattrtab $(md_file) > tmp-attrtab.c; \
- fi
- $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
+ ./genattrtab $(md_file) > tmp-attrtab.c
+ $(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
touch s-attrtab
insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h conditions.h \
hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h $(RECOG_H) \
- insn-codes.h system.h
+ function.h insn-codes.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
insn-output.c: s-output ; @true
s-output : $(md_file) genoutput $(srcdir)/move-if-change
./genoutput $(md_file) > tmp-output.c
- $(srcdir)/move-if-change tmp-output.c insn-output.c
+ $(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
touch s-output
-genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h
+genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h ggc.h
genrtl.c genrtl.h : s-genrtl
@true # force gnu make to recheck modification times.
s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H)
- ./gengenrtl tmp-genrtl.h tmp-genrtl.c
- $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
- $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
+ ./gengenrtl -h >tmp-genrtl.h
+ $(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
+ ./gengenrtl >tmp-genrtl.c
+ $(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
touch s-genrtl
-
#\f
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
# even if GCC is being compiled to run on some other machine.
# $(CONFIG_H) is omitted from the deps of the gen*.o
-# because these programs don't really depend on anything
+# because these programs don't really depend on anything
# about the target machine. They do depend on config.h itself,
# since that describes the host machine.
$(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
mv tmp-$@ $@
-genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h
+genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
-genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h
+genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
-gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h
+gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
-genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h
+genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
-genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h
+genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
-genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h
+genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
-genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h
+genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
-genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h
+genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
-genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h
+genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
-genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
+genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_RTLANAL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
+ genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_RTLANAL) $(HOST_LIBS)
-genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h insn-config.h
+genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h errors.h ggc.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
-genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
+genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
+ genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h
+genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h errors.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
-
#\f
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
+$(HOST_PREFIX_1)errors.o: errors.c
+ rm -f $(HOST_PREFIX)errors.c
+ sed -e 's/config[.]h/hconfig.h/' $(srcdir)/errors.c > $(HOST_PREFIX)errors.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)errors.c
+
+
# This satisfies the dependency that we get if you cross-compile a compiler
# that does not need to compile alloca, malloc or whatever.
-$(HOST_PREFIX_1):
+$(HOST_PREFIX_1):
touch $(HOST_PREFIX_1)
cpp$(exeext): $(CCCP)$(exeext)
-rm -f cpp$(exeext)
$(LN) $(CCCP)$(exeext) cpp$(exeext)
-CCCP_OBJS = cccp.o cexp.o intl.o prefix.o version.o @extra_cpp_objs@ mbchar.o
+CCCP_OBJS = cccp.o cexp.o intl.o prefix.o version.o @extra_cpp_objs@ mbchar.o
cccp$(exeext): $(CCCP_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CCCP_OBJS) $(LIBS)
-cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h
+cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h mbchar.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
cd $(srcdir); $(BISON) -o cexp.c cexp.y
+PREPROCESSOR_DEFINES = \
+ -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
+ -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
+ -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
+ -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
+ -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
# We use $(libsubdir)/$(unlibsubdir) to match the
# -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
cccp.o: cccp.c $(CONFIG_H) intl.h pcp.h version.c config.status system.h \
mbchar.h prefix.h Makefile.in
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
- -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
- -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
+ $(PREPROCESSOR_DEFINES) \
-c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
LIBCPP_OBJS = cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
cpphash.o: cpphash.c $(CONFIG_H) cpplib.h intl.h system.h cpphash.h
cppalloc.o: cppalloc.c $(CONFIG_H) cpplib.h intl.h system.h
cpperror.o: cpperror.c $(CONFIG_H) cpplib.h intl.h system.h
-cppexp.o: cppexp.c $(CONFIG_H) cpplib.h intl.h system.h
+cppexp.o: cppexp.c $(CONFIG_H) cpplib.h intl.h system.h cpphash.h
cppfiles.o: cppfiles.c $(CONFIG_H) cpplib.h intl.h system.h
cppinit.o: cppinit.c $(CONFIG_H) cpplib.h intl.h system.h \
cpphash.h prefix.h output.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
- -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
- -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
+ $(PREPROCESSOR_DEFINES) \
-c `echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
# Note for the stamp targets, we run the program `true' instead of
proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X
-PROTO_OBJS = getpwd.o intl.o version.o
+PROTO_OBJS = intl.o version.o
protoize$(exeext): protoize.o $(PROTO_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ protoize.o $(PROTO_OBJS) $(LIBS)
protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) system.h \
Makefile
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
- -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
- -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
- -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DSTD_PROTO_DIR=\"$(libsubdir)\" \
+ $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
$(srcdir)/protoize.c
unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \
$(CONFIG_H) system.h Makefile
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
- -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
- -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
- -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DSTD_PROTO_DIR=\"$(libsubdir)\" \
+ $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
$(srcdir)/unprotoize.c
# This info describes the target machine, so compile with GCC just built.
cp $(srcdir)/protoize.c tmp-proto.c
chmod u+w tmp-proto.c
./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
- $(CFLAGS) $(INCLUDES) \
+ $(GCC_CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
- -DSTD_PROTO_DIR=0" tmp-proto.c
+ -DSTANDARD_EXEC_PREFIX=0 \
+ -DDEFAULT_TARGET_MACHINE=0 \
+ -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
@echo '**********' Expect 400 lines of differences.
-diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff
-wc -l tmp-proto.diff
./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
- $(CFLAGS) $(INCLUDES) \
+ $(GCC_CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
- -DSTD_PROTO_DIR=0" tmp-proto.c
+ -DSTANDARD_EXEC_PREFIX=0 \
+ -DDEFAULT_TARGET_MACHINE=0 \
+ -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
@echo Expect zero differences.
diff $(srcdir)/protoize.c tmp-proto.c | cat
-rm -f tmp-proto.[cs] tmp-proto$(objext)
fixinc.sh: $(FIXINCSRCDIR)/mkfixinc.sh $(FIXINCSRCDIR)/fixincl.c \
$(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/gnu-regex.c \
$(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \
- $(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def
+ $(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def
MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
export MAKE srcdir ; \
cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target)
# Build fixed copies of system files.
stmp-fixinc: fixinc.sh gsyslimits.h
rm -rf include; mkdir include
+ -chmod a+rx include
TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \
INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); SHELL=$(SHELL) ;\
export TARGET_MACHINE srcdir INSTALL_ASSERT_H SHELL ; \
if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; fi; \
if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version) ; fi; \
else true; fi
-
touch stmp-fixinc
# Files related to the fixproto script.
# if it has already been run on the files in `include'.
stmp-fixproto: fixhdr.ready fixproto stmp-headers
@echo "Various warnings and error messages from fixproto are normal"
- -if [ -d include ] ; then true; else mkdir include; fi
+ -if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
-if [ -f include/fixed ] ; then true; \
else \
: This line works around a 'make' bug in BSDI 1.1.; \
INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \
- --no-split -o INSTALL install1.texi
+ --no-split -o INSTALL install1.texi
#\f
# Deletion of files made during compilation.
# There are four levels of this:
# We remove as much from the language subdirectories as we can
# (less duplicated code).
-
-mostlyclean: intl.mostlyclean lang.mostlyclean
+INTL_MOSTLYCLEAN = intl.mostlyclean
+mostlyclean: $(INTL_MOSTLYCLEAN) lang.mostlyclean
-rm -f $(STAGESTUFF)
# Delete the temporary source copies for cross compilation.
-rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
-rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
- -rm -f $(HOST_PREFIX_1)obstack.c
+ -rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
-rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test
for name in $(LIB1FUNCS); do rm -f $${name}.c; done
# Delete debugging dump files.
-rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
-rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.addressof
- -rm -f *.regmove *.mach *.bp *.gcse *.flow2
+ -rm -f *.regmove *.mach *.bp *.gcse *.flow2 *.peephole2
-rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
-rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
-rm -f */*.sched2 */*.stack */*.regmove */*.gcse */*.flow2
+ -rm -f */*.peephole2
# Delete some files made during installation.
-rm -f specs float.h-* enquire SYSCALLS.c.X SYSCALLS.c
-rm -f collect collect2 mips-tfile mips-tdump alloca.s
# Delete all files made by compilation
# that don't exist in the distribution.
-clean: mostlyclean intl.clean lang.clean
-# It may not be quite desirable to delete unprotoize.c here,
-# but the spec for `make clean' requires it.
-# Using unprotoize.c is not quite right in the first place,
-# but what better way is there?
+INTL_CLEAN = intl.clean
+clean: mostlyclean $(INTL_CLEAN) lang.clean
-rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
-rm -f libgcc1.null
-rm -f *.dvi
# while building and installing GCC.
INTL_DISTCLEAN = intl.distclean
distclean: clean $(INTL_DISTCLEAN) lang.distclean
- -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
+ -rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
-rm -f md cstamp-h
-rm -f config.status config.run config.cache config.bak
-rm -f Make-lang Make-hooks Make-host Make-target
# Get rid of every file that's generated from some other file, except for `configure'.
# Most of these files ARE PRESENT in the GCC distribution.
-# We define INTL_DISTCLEAN to be empty in the submake, so that
-# we don't descend into intl after its makefile has been removed.
+# We define INTL_DISTCLEAN, INTL_CLEAN & INTL_MOSTLYCLEAN to be empty in the
+# submake, so that we don't descend into intl after its makefile has been
+# removed.
maintainer-clean:
@echo 'This command is intended for maintainers to use; it'
@echo 'deletes files that may need special tools to rebuild.'
- $(MAKE) INTL_DISTCLEAN= distclean \
- intl.maintainer-clean lang.maintainer-clean
+ $(MAKE) INTL_DISTCLEAN= INTL_CLEAN= INTL_MOSTLYCLEAN= \
+ intl.maintainer-clean lang.maintainer-clean distclean
-rm -f c-parse.y c-gperf.h
-rm -f c-parse.c c-parse.h c-parse.output
- -rm -f cexp.c cexp.output TAGS
+ -rm -f cexp.c cexp.output TAGS
-rm -f cpp.info* cpp.??s cpp.*aux
-rm -f gcc.info* gcc.??s gcc.*aux
#\f
install-multilib: stmp-multilib installdirs
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
- if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \
+ if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; chmod a+rx $(libsubdir)/$${dir}; fi; \
for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \
rm -f $(libsubdir)/$${dir}/$${f}; \
$(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \
# found in CDPATH, corrupting the output. We could just redirect the
# output of `cd', but some shells lose on redirection within `()'s
(cd `pwd`/include ; \
- tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - )
+ tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar xpf - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.
-rm -rf $(man1dir)/unprotoize$(manext)
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
#\f
-# These targets are for the dejagnu testsuites. The file site.exp
+# These targets are for the dejagnu testsuites. The file site.exp
# contains global variables that all the testsuites will use.
# Set to $(target_alias)/ for cross.
$$1 " " $$2 " " $$3 != "This directory contains"' \
version=$(version) $(srcdir)/README > tmp.README
mv tmp.README README
- -rm -rf gcc-$(version) tmp
+ -rm -rf gcc-$(version) tmp
# Put all the files in a temporary subdirectory
# which has the name that we want to have in the tar file.
mkdir tmp
distdir: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
lang.distdir distdir-finish
-# make diff oldversion=M.N
+# make diff oldversion=M.N
# creates a diff file between an older distribution and this one.
# The -P option assumes this is GNU diff.
diff:
echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
echo "#endif" >> t-float.h-cross
mv t-float.h-cross float.h-cross
-
OSDN Git Service
