# Makefile for GNU C compiler.
# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995
-# 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+# 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
#This file is part of GNU CC.
# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
# stage1, stage2, stage3, stage4.
+# This is the default target.
+all:
+
# Suppress smart makes who think they know how to automake Yacc files
.y.c:
# Languages should create dependencies of $(INTL_TARGETS) on generated
# sources in Make-lang.in. Example:
# $(INTL_TARGETS): $(srcdir)/cp/parse.c
-INTL_TARGETS = intl.all intl.install intl.distdir
+INTL_TARGETS = intl.all intl.install
# Selection of languages to be made during stage1 build.
# This is overridden by configure.
# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
-# BOOT_CFLAGS is the value of CFLAGS to pass
-# to the stage2 and stage3 compilations
-# WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
-# (And for stage 1 if the native compiler is GCC.) It is
-# separate from BOOT_CFLAGS because people tend to override optimization
-# flags and we'd like them to still have warnings turned on. They are free
-# to explicitly turn warnings off if they wish.
-# LOOSE_CFLAGS are the CFLAGS to use when compiling something which is only
-# compiled with gcc, such as libgcc and the frontends other than C.
+# BOOT_CFLAGS is the value of CFLAGS to pass to the stage2 and stage3
+# compilations.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
+# STAGE1_CFLAGS is set by configure on some targets.
XCFLAGS =
TCFLAGS =
-CFLAGS = -g @stage1_warn_cflags@
-BOOT_CFLAGS = -O2 $(CFLAGS)
-WARN_CFLAGS = @stage2_warn_cflags@
-LOOSE_CFLAGS = `echo $(CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'`
+BOOT_CFLAGS = -g -O2
+STAGE1_CFLAGS = -g @stage1_cflags@
+CFLAGS = $(STAGE1_CFLAGS)
+
+# The warning flags are separate from BOOT_CFLAGS because people tend to
+# override optimization flags and we'd like them to still have warnings
+# turned on. These flags are also used to pass other stage dependent
+# flags from configure. The user is free to explicitly turn these flags
+# off if they wish.
+# LOOSE_WARN are the warning flags to use when compiling something
+# which is only compiled with gcc, such as libgcc and the frontends
+# other than C.
+# STRICT_WARN and STRICT2_WARN are the additional warning flags to
+# apply to the back end and the C front end, which may be compiled
+# with other compilers. This is partially controlled by configure in
+# stage1, as not all versions of gcc understand -Wno-long-long.
+LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
+STRICT_WARN = -Wtraditional @strict1_warn@
+STRICT2_WARN = -Wtraditional -pedantic -Wno-long-long
+
+# This is how we control whether or not the additional warnings are applied.
+.-warn = $(STRICT_WARN)
+GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn)
+
+# All warnings have to be shut off in stage1 if the compiler used then
+# isn't gcc; configure determines that. WARN_CFLAGS will be either
+# $(GCC_WARN_CFLAGS), or nothing.
+WARN_CFLAGS = @warn_cflags@
+
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =
AWK = @AWK@
CC = @CC@
-# srcdir might be a relative pathname which won't be valid in a subdirectory,
-# so we must use objdir/srcdir instead to make it safe. objdir is always
-# a full pathname.
-BISON = `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
- /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
- *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
- esac; else echo bison ; fi`
+BISON = @BISON@
BISONFLAGS =
-LEX = `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
-LEXFLAGS =
+FLEX = @FLEX@
+FLEXFLAGS =
AR = ar
AR_FLAGS = rc
-LN = @symbolic_link@
DLLTOOL = dlltool
SHELL = /bin/sh
# on sysV, define this as cp.
MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
+TEXI2POD = $(srcdir)/../contrib/texi2pod.pl
+POD2MAN = pod2man --center="GNU" --release="gcc-$(version)" --section=1
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
@SET_MAKE@
+# Some compilers can't handle cc -c blah.c -o foo/blah.o.
+# In stage2 and beyond, we force this to "-o $@" since we know we're using gcc.
+OUTPUT_OPTION = @OUTPUT_OPTION@
-# Define this as & to perform parallel make on a Sequent.
-# Note that this has some bugs, and it seems currently necessary
-# to compile all the gen* files first by hand to avoid erroneous results.
-P =
+# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
+# -I../zlib, unless we were configured with --with-system-zlib, in which
+# case both are empty.
+ZLIB = @zlibdir@ -lz
+ZLIBINC = @zlibinc@
# How to invoke ranlib.
RANLIB = ranlib
# The GCC to use for compiling libgcc.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
-GCC_FOR_TARGET = ./xgcc -B$(build_tooldir)/bin/ -B./ -isystem $(build_tooldir)/include
+GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -isystem ./include to find, e.g., stddef.h.
-GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_CFLAGS) -isystem ./include $(TCFLAGS)
+GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -isystem ./include $(TCFLAGS)
# Specify the abi to use when building the c++ runtime
GXX_ABI_FLAG=@GXX_ABI_FLAG@
[ -f $(RANLIB_FOR_TARGET) ] \
|| ( [ "$(host_canonical)" = "$(target)" ] \
&& [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )
+NM_FOR_TARGET = ` \
+ if [ -f $(objdir)/../binutils/nm ] ; then \
+ echo $(objdir)/../binutils/nm ; \
+ else \
+ if [ "$(host_canonical)" = "$(target)" ] ; then \
+ echo nm; \
+ else \
+ t='$(program_transform_cross_name)'; echo nm | sed -e $$t ; \
+ fi; \
+ fi`
# Dir to search for system headers. Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include
gcc_tooldir = @gcc_tooldir@
# Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
build_tooldir = $(exec_prefix)/$(target_alias)
-# Directory in which the compiler finds g++ includes.
-gcc_gxx_include_dir= @gcc_gxx_include_dir@
+# Directory in which the compiler finds target-independent g++ includes.
+gcc_gxx_include_dir = @gcc_gxx_include_dir@
+# Directory in which the compiler finds target-dependent g++ includes.
+gcc_gxx_target_include_dir = $(build_tooldir)/include/@libstdcxx_incdir@
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# assertdir is overridden in cross-make.
# Additional target-dependent options for compiling libgcc2.a.
TARGET_LIBGCC2_CFLAGS =
-# Addition sources to handle exceptions; overridden by some targets.
+# Additional sources to handle exceptions; overridden by some targets.
LIB2ADDEH = $(srcdir)/frame-dwarf2.c
# libgcc1-test target (must also be overridable for a target)
LIBGCC1_TEST = libgcc1-test
+# nm flags to list global symbols in libgcc object files.
+SHLIB_NM_FLAGS = -pg
+
# List of extra executables that should be compiled for this target machine
# that are used for compiling from source code to object code.
# The rules for compiling them should be in the t-* file for the machine.
# Control whether Info documentation is built and installed.
BUILD_INFO = @BUILD_INFO@
-INSTALL_INFO = @INSTALL_INFO@
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
-GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES)
+GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp0$(exeext) specs $(EXTRA_PASSES)
# List of things which should already be built whenever we try to use xgcc
# to link anything.
# Directory to link to, when using the target `maketest'.
DIR = ../gcc
-# Guaranteed to not exist when not passing md through cpp.
-# This value is overridden directly by configure.
-MD_FILE = md-cpp-not-used
-
# Flags to use when cross-building GCC.
# Prefix to apply to names of object files when using them
# to run on the machine we are compiling on.
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
-HOST_CFLAGS=$(ALL_CFLAGS)
+# If you change any of the following variables, check whether a
+# similar change is needed in build-make.
+HOST_CFLAGS=$(ALL_CFLAGS) -DGENERATOR_FILE
HOST_CLIB=$(CLIB)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
T =
+# Should T contain a `=', libgcc.mk will make T_TARGET, setting
+# $(T_TARGET) to the name of the actual target filename.
+T_TARGET =
+T_TARGET : $(T_TARGET)
+
# End of variables for you to override.
# Definition of `all' is here so that new rules inserted by sed
# This is the variable actually used when we compile.
# If you change this line, you probably also need to change the definition
# of HOST_CFLAGS in build-make to match.
-ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) \
- @DEFS@
+ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) \
+ $(CFLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@
# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
$(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) $(HOST_CLIB)
HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o \
- $(HOST_PREFIX)ggc-none.o gensupport.o
+ $(HOST_PREFIX)ggc-none.o gensupport.o hashtab.o safe-ctype.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
HOST_ERRORS = $(HOST_PREFIX)errors.o
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
-INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config -I$(srcdir)/../include
+# -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file
+# currently being compiled, in both source trees, to be examined as well.
+INCLUDES = -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \
+ -I$(srcdir)/config -I$(srcdir)/../include
# Always use -I$(srcdir)/config when compiling.
.c.o:
- $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
+ $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
# This tells GNU make version 3 not to export all the variables
# defined in this file into the environment.
LANG_MAKEFILES = @all_lang_makefiles@
LANG_STAGESTUFF = @all_stagestuff@
LANG_DIFF_EXCLUDES = @all_diff_excludes@
-LANG_LIB2FUNCS = @all_lib2funcs@
LANG_EXTRA_HEADERS = @all_headers@
# Flags to pass to recursive makes.
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"BISON=$(BISON)" \
"BISONFLAGS=$(BISONFLAGS)" \
- "CFLAGS=$(CFLAGS)" \
+ "CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
"CLIB=$(CLIB)" \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"LDFLAGS=$(LDFLAGS)" \
- "LEX=$(LEX)" \
- "LEXFLAGS=$(LEXFLAGS)" \
+ "FLEX=$(FLEX)" \
+ "FLEXFLAGS=$(FLEXFLAGS)" \
"LN=$(LN)" \
"LN_S=$(LN_S)" \
"MAKEINFO=$(MAKEINFO)" \
"bindir=$(bindir)" \
"libsubdir=$(libsubdir)" \
"datadir=$(datadir)" \
- "distdir=../tmp/\$$(subdir)" \
"localedir=$(localedir)"
FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) "CC=@cc_set_by_configure@"
PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \
-e 's|%||g'
SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \
"CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
-# Flags to pass when recursing into a frontend subdirectory.
-LANG_FLAGS_TO_PASS = $(SUBDIR_FLAGS_TO_PASS) \
- "CFLAGS=$(LOOSE_CFLAGS)"
#\f
# Lists of files for various purposes.
+# Target specific, C specific object file
+C_TARGET_OBJS=@c_target_objs@
+
+# Target specific, C++ specific object file
+CXX_TARGET_OBJS=@cxx_target_objs@
+
# Language-specific object files for C and Objective C.
C_AND_OBJC_OBJS = c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
- c-convert.o c-aux-info.o c-common.o c-iterate.o c-semantics.o @extra_c_objs@
+ c-convert.o c-aux-info.o c-common.o c-semantics.o c-dump.o libcpp.a \
+ $(C_TARGET_OBJS)
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
# Language-independent object files.
-OBJS = diagnostic.o \
- toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
+
+OBJS = diagnostic.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
- integrate.o jump.o cse.o loop.o unroll.o flow.o combine.o varray.o \
+ integrate.o jump.o cse.o loop.o doloop.o unroll.o flow.o combine.o varray.o \
regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o regrename.o \
insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
mbchar.o splay-tree.o graph.o sbitmap.o resource.o hash.o predict.o \
- lists.o ggc-common.o $(GGC) simplify-rtx.o ssa.o bb-reorder.o \
- sibcall.o conflict.o timevar.o ifcvt.o
+ lists.o ggc-common.o $(GGC) stringpool.o simplify-rtx.o ssa.o bb-reorder.o \
+ sibcall.o conflict.o timevar.o ifcvt.o dominance.o dependence.o dce.o \
+ sched-vis.o sched-deps.o sched-rgn.o sched-ebb.o hashtab.o
+
+BACKEND = toplev.o libbackend.a
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
# them before rtl.o is compiled.
-GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \
- genpeep gengenrtl gencheck
+GEN= genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
+ genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
+ genconfig$(build_exeext) genpeep$(build_exeext) gengenrtl$(build_exeext) \
+ gencheck$(build_exeext)
# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
gencheck$(build_exeext) genrtl.c genrtl.h \
- xgcc$(exeext) xcpp$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \
+ xgcc$(exeext) cpp$(exeext) cc1$(exeext) cpp0$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) cc1obj$(exeext) \
enquire$(exeext) protoize$(exeext) unprotoize$(exeext) \
- specs collect2$(exeext) $(USE_COLLECT2) underscore.c tradcpp$(exeext) \
- gcov$(exeext) *.[0-9][0-9].* *.[si] libcpp.a libgcc libgcc.mk \
+ specs collect2$(exeext) $(USE_COLLECT2) underscore.c tradcpp0$(exeext) \
+ gcov$(exeext) *.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk \
$(LANG_STAGESTUFF)
# Members of libgcc1.a.
# Library members defined in libgcc2.c.
LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
- _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
+ _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _clz \
_udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
_fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
_fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
_fixtfdi _fixunstfdi _floatditf \
__gcc_bcmp _varargs __dummy _eprintf \
- _bb _shtab _clear_cache _trampoline __main _exit \
- _ctors _pure
+ _bb _clear_cache _trampoline __main _exit \
+ _absvsi2 _absvdi2 _addvsi3 _addvdi3 _subvsi3 _subvdi3 \
+ _mulvsi3 _mulvdi3 _negvsi2 _negvdi2 \
+ _ctors
LIB2FUNCS_EH = _eh
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
_lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
- _sf_to_df _thenan_sf _sf_to_usi
+ _sf_to_df _thenan_sf _sf_to_usi _usi_to_sf
DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
_fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
_lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
- _df_to_sf _thenan_df _df_to_usi
+ _df_to_sf _thenan_df _df_to_usi _usi_to_df
-# The files that "belong" in CONFIG_H are deliberately omitted
+# GCONFIG_H lists the config files that the generator files depend on, while
+# CONFIG_H lists the the ones ordinary gcc files depend on, which includes
+# a file generated by gencodes.
+# The files that "belong" in GCONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# All they would do is cause complete recompilation every time
# one of the machine description files is edited.
# That may or may not be what one wants to do.
# If it is, rm *.o is an easy way to do it.
-# CONFIG_H = $(host_xm_file) $(tm_file)
-CONFIG_H =
+# GCONFIG_H = $(host_xm_file) $(tm_file)
+GCONFIG_H =
+CONFIG_H = $(GCONFIG_H) insn-codes.h
MACHMODE_H = machmode.h machmode.def
RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
RTL_H = $(RTL_BASE_H) genrtl.h
GCC_H = gcc.h version.h
GGC_H = ggc.h varray.h
TIMEVAR_H = timevar.h timevar.def
+INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
+C_COMMON_H = c-common.h $(SPLAY_TREE_H)
+C_TREE_H = c-tree.h $(C_COMMON_H)
+
#\f
# Language makefile fragments.
# all.build, all.cross, start.encap, rest.encap,
# info, dvi,
# install-normal, install-common, install-info, install-man,
-# uninstall, distdir,
+# uninstall,
# mostlyclean, clean, distclean, extraclean, maintainer-clean,
# stage1, stage2, stage3, stage4
#
rm -f config.run
$(srcdir)/configure: $(srcdir)/configure.in
- cd $(srcdir); autoconf
+ (cd $(srcdir) && autoconf)
gccbug: $(srcdir)/gccbug.in
CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
# ??? Newer versions have a maintainer mode that may be useful here.
$(srcdir)/config.in: $(srcdir)/cstamp-h.in
$(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
- cd $(srcdir) && autoheader
+ (cd $(srcdir) && autoheader)
@rm -f $(srcdir)/cstamp-h.in
echo timestamp > $(srcdir)/cstamp-h.in
auto-host.h: cstamp-h ; @true
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# config.status does not exist before failing.
-config.status: $(srcdir)/configure version.c
+config.status: $(srcdir)/configure $(srcdir)/config.gcc version.c
@if [ ! -f config.status ] ; then \
- echo You must configure gcc. Look at the INSTALL file for details.; \
+ echo You must configure gcc. Look at http://gcc.gnu.org/install/ for details.; \
false; \
else \
LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status --recheck; \
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
-all.cross: native gcc-cross xcpp$(exeext) specs \
+all.cross: native gcc-cross cpp$(exeext) specs \
$(LIBGCC) $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc
# This is what to compile if making gcc with a cross-compiler.
-all.build: native xgcc$(exeext) xcpp$(exeext) $(EXTRA_PARTS) lang.all.build
+all.build: native xgcc$(exeext) cpp$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
-start.encap: native xgcc$(exeext) xcpp$(exeext) specs \
+start.encap: native xgcc$(exeext) cpp$(exeext) specs \
xlimits.h lang.start.encap
# These can't be made until after GCC can run.
rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
-native: config.status auto-host.h cpp$(exeext) intl.all $(LANGUAGES) \
+native: config.status auto-host.h intl.all $(LANGUAGES) \
$(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
# Define the names for selecting languages in LANGUAGES.
-C c: cc1$(exeext) tradcpp$(exeext)
+C c: cc1$(exeext) tradcpp0$(exeext)
PROTO: proto
# Tell GNU make these are phony targets.
# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
-compilations: ${OBJS}
+compilations: $(BACKEND)
-# Create a list of the language-independent object files so the language
-# subdirectories needn't mention their names explicitly.
-stamp-objlist: $(OBJS)
- echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
+# Like libcpp.a, this archive is strictly for the host.
+libbackend.a: $(OBJS)
+ -rm -rf libbackend.a
+ $(AR) $(AR_FLAGS) libbackend.a $(OBJS)
+ if $(RANLIB_TEST) ; then $(RANLIB) libbackend.a ; else true ; fi
# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o gccspec.o intl.o \
prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
-# We call this executable `xcpp' rather than `cpp'
-# since the real preprocessor is named `cpp'. It too is renamed
-# when it is installed.
+# cpp is to cpp0 as gcc is to cc1.
# The only difference from xgcc is that it's linked with cppspec.o
# instead of gccspec.o.
-xcpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \
+cpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \
version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o cppspec.o intl.o \
prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
gcc-cross: xgcc$(exeext)
cp xgcc$(exeext) gcc-cross$(exeext)
-cc1$(exeext): $(P) $(OBJS) $(C_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(C_OBJS) $(LIBS)
+cc1$(exeext): $(C_OBJS) $(BACKEND) $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1$(exeext) \
+ $(C_OBJS) $(BACKEND) $(LIBS)
# Build the version of limits.h that we will install.
xlimits.h: glimits.h limitx.h limity.h
#\f
# Build libgcc.a.
-LIB2ADD = $(LIB2ADDEH) $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
+LIB2ADD = $(LIB2ADDEH) $(LIB2FUNCS_EXTRA)
libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) xgcc$(exeext)
objext='$(objext)' \
DPBIT_FUNCS='$(DPBIT_FUNCS)' \
MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
+ SHLIB_LINK='$(SHLIB_LINK)' \
+ SHLIB_EXT='$(SHLIB_EXT)' \
+ SHLIB_MULTILIB='$(SHLIB_MULTILIB)' \
+ SHLIB_MKMAP='$(SHLIB_MKMAP)' \
+ SHLIB_MAPFILES='$(SHLIB_MAPFILES)' \
+ SHLIB_NM_FLAGS='$(SHLIB_NM_FLAGS)' \
$(SHELL) mklibgcc > tmp-libgcc.mk
mv tmp-libgcc.mk libgcc.mk
LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \
libgcc.mk $(srcdir)/libgcc1.c $(srcdir)/libgcc2.c $(CONFIG_H) \
$(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status \
- stmp-int-hdrs tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD)
+ stmp-int-hdrs tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD) $(EXTRA_PARTS)
libgcc.a: $(LIBGCC_DEPS)
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" CFLAGS="$(CFLAGS)" \
+ OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" \
+ CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" CFLAGS="$(CFLAGS)" \
+ OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" \
+ CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
# C language specific files.
-c-errors.o: c-errors.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
+c-errors.o: c-errors.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) flags.h \
diagnostic.h
-c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) \
- $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h \
- toplev.h output.h
+c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) intl.h \
+ $(C_TREE_H) input.h flags.h system.h toplev.h output.h cpplib.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
-$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
+
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
- cd $(srcdir); $(BISON) $(BISONFLAGS) -d -o c-parse.c c-parse.y
+ (cd $(srcdir) && $(BISON) $(BISONFLAGS) -o c-p$$$$.c c-parse.y && \
+ mv -f c-p$$$$.c c-parse.c)
$(srcdir)/c-parse.y: c-parse.in
echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
$(srcdir)/c-parse.in >>tmp-c-parse.y
$(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
-$(srcdir)/c-gperf.h: c-parse.gperf
- gperf -L C -F ', 0, 0' -p -j1 -i 1 -g -o -t -G -N is_reserved_word \
- -k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h || ( \
- echo "See $(website)/cvs.html#generated_files" >&2 ; \
- exit 1 )
- $(SHELL) $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
-
-c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
- c-common.h $(GGC_H) c-lex.h flags.h function.h output.h $(EXPR_H) \
+c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) $(C_TREE_H) \
+ $(GGC_H) c-lex.h flags.h function.h output.h $(EXPR_H) \
toplev.h defaults.h intl.h
-c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
+c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
-c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
- $(GGC_H) c-lex.h toplev.h output.h function.h
-c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
- c-common.h $(srcdir)/c-parse.h $(srcdir)/c-gperf.h c-pragma.h input.h \
- intl.h flags.h toplev.h output.h mbchar.h $(GGC_H)
-c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h \
- c-common.h flags.h toplev.h
+c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ $(GGC_H) c-lex.h toplev.h diagnostic.h output.h function.h \
+ $(RTL_H) $(EXPR_H)
+c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h $(C_TREE_H) \
+ c-pragma.h input.h intl.h flags.h toplev.h output.h \
+ mbchar.h cpplib.h $(EXPR_H)
+c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) function.h \
defaults.h c-pragma.h toplev.h $(GGC_H)
-c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
- c-common.h flags.h toplev.h $(EXPR_H)
mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h
graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \
function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
$(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
- -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
+ -c $(srcdir)/collect2.c
tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h intl.h
hash.o: hash.c hash.h system.h toplev.h
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h
+vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(GCONFIG_H) system.h
rm -f vfprintf.c
$(LN_S) $(srcdir)/../libiberty/vfprintf.c vfprintf.c
- $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) vfprintf.c
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ vfprintf.c $(OUTPUT_OPTION)
splay-tree.o: $(srcdir)/../libiberty/splay-tree.c \
$(srcdir)/../include/splay-tree.h $(srcdir)/../include/libiberty.h
rm -f splay-tree.c
$(LN_S) $(srcdir)/../libiberty/splay-tree.c splay-tree.c
- $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) splay-tree.c
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ splay-tree.c $(OUTPUT_OPTION)
underscore.c: s-under ; @true
# A file used by all variants of C.
-c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) \
- c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
- $(EXPR_H)
+c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) $(OBSTACK_H) \
+ $(C_COMMON_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
+ $(EXPR_H) diagnostic.h
-c-semantics.o : c-semantics.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
- c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
+c-semantics.o : c-semantics.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ c-lex.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
$(EXPR_H)
+c-dump.o: c-dump.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ c-lex.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
+ $(EXPR_H) $(SPLAY_TREE_H) c-dump.h
+
# Language-independent files.
DRIVER_DEFINES = \
Makefile $(lang_specs_files) prefix.h $(GCC_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) \
- -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
+ -c $(srcdir)/gcc.c
gccspec.o: gccspec.c $(CONFIG_H) system.h $(GCC_H)
cppspec.o: cppspec.c $(CONFIG_H) system.h $(GCC_H)
tree-check.h: s-check ; @true
-s-check : gencheck $(srcdir)/move-if-change
- ./gencheck > tmp-check.h
+s-check : gencheck$(build_exeext) $(srcdir)/move-if-change
+ ./gencheck$(build_exeext) > tmp-check.h
$(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h
touch s-check
-gencheck : gencheck.o $(HOST_LIBDEPS)
+gencheck$(build_exeext) : gencheck.o $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencheck.o $(HOST_LIBS)
ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h toplev.h \
$(GGC_H) varray.h $(TIMEVAR_H)
-ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) $(GGC_H)
+stringpool.o: stringpool.c $(CONFIG_H) system.h $(TREE_H) $(OBSTACK_H) \
+ flags.h toplev.h
-ggc-callbacks.o: ggc-callbacks.c $(CONFIG_H) $(RTL_H) $(TREE_H) $(GGC_H)
+ggc-none.o: ggc-none.c $(GCONFIG_H) $(RTL_H) $(GGC_H)
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H)
+obstack.o: $(srcdir)/../libiberty/obstack.c $(GCONFIG_H)
rm -f obstack.c
$(LN_S) $(srcdir)/../libiberty/obstack.c obstack.c
- $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) obstack.c
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ obstack.c $(OUTPUT_OPTION)
prefix.o: prefix.c $(CONFIG_H) system.h Makefile prefix.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DPREFIX=\"$(prefix)\" \
- -c `echo $(srcdir)/prefix.c | sed 's,^\./,,'`
+ -c $(srcdir)/prefix.c
convert.o: convert.c $(CONFIG_H) system.h $(TREE_H) flags.h convert.h toplev.h
tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h \
- $(GGC_H) $(HASHTAB_H) output.h
+ $(GGC_H) $(HASHTAB_H) output.h defaults.h
print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) $(GGC_H)
stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H)
fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \
- $(RTL_H) ggc.h
+ $(EXPR_H) $(RTL_H) $(GGC_H)
diagnostic.o : diagnostic.c diagnostic.h \
$(CONFIG_H) system.h $(TREE_H) $(RTL_H) tm_p.h flags.h \
- $(GGC_H) input.h insn-attr.h insn-codes.h insn-config.h toplev.h intl.h
+ $(GGC_H) input.h $(INSN_ATTR_H) insn-codes.h insn-config.h toplev.h intl.h
toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) function.h \
- flags.h input.h insn-attr.h xcoffout.h defaults.h output.h diagnostic.h \
+ flags.h input.h $(INSN_ATTR_H) xcoffout.h defaults.h output.h diagnostic.h \
insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
- graph.h loop.h except.h regs.h $(TIMEVAR_H) $(lang_options_files)
+ graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) $(lang_options_files) ssa.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
-DTARGET_NAME=\"$(target_alias)\" \
- -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
+ -c $(srcdir)/toplev.c
-rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h $(GGC_H) toplev.h
+rtl.o : rtl.c $(GCONFIG_H) system.h $(RTL_H) bitmap.h $(GGC_H) toplev.h
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+print-rtl.o : print-rtl.c $(GCONFIG_H) system.h $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H)
-rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
-errors.o : errors.c $(CONFIG_H) system.h errors.h
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
+rtlanal.o : rtlanal.c $(CONFIG_H) system.h toplev.h $(RTL_H)
+errors.o : errors.c $(GCONFIG_H) system.h errors.h
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
insn-codes.h toplev.h function.h
optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h \
- toplev.h $(GGC_H) real.h
+ toplev.h $(GGC_H) real.h defaults.h
dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
toplev.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \
$(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h \
- $(HASHTAB_H)
+ $(HASHTAB_H) defaults.h
real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
$(INTEGRATE_H) insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \
intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H)
jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
- toplev.h insn-attr.h
+ toplev.h $(INSN_ATTR_H)
simplify-rtx.o : simplify-rtx.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
- output.h function.h cselib.h ggc.h $(OBSTACK_H)
+ output.h function.h cselib.h $(GGC_H) $(OBSTACK_H)
cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h $(GGC_H)
+ real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h \
+ $(BASIC_BLOCK_H) $(GGC_H)
gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
function.h output.h toplev.h
hard-reg-set.h flags.h insn-config.h $(RECOG_H) $(BASIC_BLOCK_H)
resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \
$(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h \
- insn-attr.h except.h
+ $(INSN_ATTR_H) except.h
lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h insn-attr.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
-ssa.o : ssa.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) $(BASIC_BLOCK_H) \
- output.h insn-config.h
+ real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
+ssa.o : ssa.c $(CONFIG_H) system.h $(REGS_H) varray.h \
+ hard-reg-set.h flags.h function.h real.h insn-config.h $(RECOG_H) \
+ $(BASIC_BLOCK_H) output.h ssa.h
+dce.o : dce.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H) \
+ ssa.h insn-config.h $(RECOG_H) output.h
conflict.o : conflict.c $(CONFIG_H) system.h $(OBSTACK_H) $(HASHTAB_H) \
$(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h output.h $(REGS_H) $(EXPR_H) function.h \
- gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H)
+ gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H) defaults.h
loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h $(LOOP_H) insn-config.h \
insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
$(BASIC_BLOCK_H) function.h toplev.h varray.h except.h cselib.h
+doloop.o : doloop.c $(CONFIG_H) system.h $(RTL_H) flags.h $(LOOP_H) \
+ insn-flags.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H)
unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h function.h \
$(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \
hard-reg-set.h varray.h $(BASIC_BLOCK_H)
flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
- insn-flags.h function.h except.h $(EXPR_H)
+ insn-flags.h function.h except.h $(EXPR_H) ssa.h $(GGC_H)
+dominance.o : dominance.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+ $(BASIC_BLOCK_H)
combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h function.h \
- insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \
+ insn-config.h insn-flags.h insn-codes.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
$(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
$(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h \
toplev.h function.h output.h $(GGC_H)
local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
- output.h function.h insn-attr.h toplev.h
-bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
+ output.h function.h $(INSN_ATTR_H) toplev.h
+bitmap.o : bitmap.c $(GCONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
$(REGS_H)
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h function.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h
varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h
$(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
$(RECOG_H) reload.h $(EXPR_H) toplev.h
reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
- $(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h insn-flags.h \
+ $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) insn-flags.h \
$(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h
alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
- $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h $(GGC_H) function.h \
- cselib.h $(TREE_H)
+ $(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h \
+ $(GGC_H) function.h cselib.h $(TREE_H)
regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
- $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h function.h \
+ $(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \
$(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
-haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) \
+haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
+ $(INSN_ATTR_H) insn-flags.h toplev.h $(RECOG_H) except.h
+sched-deps.o : sched-deps.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
+sched-rgn.o : sched-rgn.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- insn-attr.h toplev.h $(RECOG_H) except.h
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
+sched-ebb.o : sched-ebb.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
+sched-vis.o : sched-vis.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H)
final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \
- $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h function.h \
+ $(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) function.h \
real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
dbxout.h $(BASIC_BLOCK_H)
recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) function.h $(BASIC_BLOCK_H) \
- $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
- insn-flags.h insn-codes.h real.h toplev.h output.h
+ $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h $(INSN_ATTR_H) \
+ insn-flags.h insn-codes.h real.h toplev.h output.h reload.h
reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) $(RECOG_H) \
$(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
varray.h function.h
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
$(RECOG_H) insn-flags.h function.h except.h $(EXPR_H)
timevar.o : timevar.c $(CONFIG_H) system.h $(TIMEVAR_H) flags.h intl.h
-regrename.o : regrename.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h \
- $(RECOG_H) function.h resource.h
+regrename.o : regrename.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
+ resource.h $(OBSTACK_H) flags.h
ifcvt.o : ifcvt.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
flags.h insn-config.h function.h $(RECOG_H) $(BASIC_BLOCK_H) $(EXPR_H) \
output.h
+dependence.o : dependence.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) \
+ $(C_COMMON_H) flags.h varray.h $(EXPR_H)
+
$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) $(GGC_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
- insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
- $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
+ insn-flags.h output.h $(INSN_ATTR_H) insn-codes.h system.h toplev.h \
+ function.h sched-int.h
+ $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+ $(out_file) $(OUTPUT_OPTION)
# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
alloca.o: $(srcdir)/../libiberty/alloca.c
rm -f alloca.c
$(LN_S) $(srcdir)/../libiberty/alloca.c alloca.c
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
- -c `echo alloca.c | sed 's,^\./,,'`
+ $(CC) $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ $(ALLOCA_FLAGS) -c alloca.c
$(ALLOCA_FINISH)
#\f
# Generate header and source files from the machine description,
# trailing `;'), we call true for each.
insn-config.h: s-config ; @true
-s-config : $(md_file) genconfig $(srcdir)/move-if-change
- ./genconfig $(md_file) > tmp-config.h
+s-config : $(md_file) genconfig$(build_exeext) $(srcdir)/move-if-change
+ ./genconfig$(build_exeext) $(md_file) > tmp-config.h
$(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h
touch s-config
insn-flags.h: s-flags ; @true
-s-flags : $(md_file) genflags $(srcdir)/move-if-change
- ./genflags $(md_file) > tmp-flags.h
+s-flags : $(md_file) genflags$(build_exeext) $(srcdir)/move-if-change
+ ./genflags$(build_exeext) $(md_file) > tmp-flags.h
$(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
touch s-flags
insn-codes.h: s-codes ; @true
-s-codes : $(md_file) gencodes $(srcdir)/move-if-change
- ./gencodes $(md_file) > tmp-codes.h
+s-codes : $(md_file) gencodes$(build_exeext) $(srcdir)/move-if-change
+ ./gencodes$(build_exeext) $(md_file) > tmp-codes.h
$(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
touch s-codes
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
insn-emit.c: s-emit ; @true
-s-emit : $(md_file) genemit $(srcdir)/move-if-change
- ./genemit $(md_file) > tmp-emit.c
+s-emit : $(md_file) genemit$(build_exeext) $(srcdir)/move-if-change
+ ./genemit$(build_exeext) $(md_file) > tmp-emit.c
$(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
touch s-emit
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
insn-recog.c: s-recog ; @true
-s-recog : $(md_file) genrecog $(srcdir)/move-if-change
- ./genrecog $(md_file) > tmp-recog.c
+s-recog : $(md_file) genrecog$(build_exeext) $(srcdir)/move-if-change
+ ./genrecog$(build_exeext) $(md_file) > tmp-recog.c
$(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
touch s-recog
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
insn-opinit.c: s-opinit ; @true
-s-opinit : $(md_file) genopinit $(srcdir)/move-if-change
- ./genopinit $(md_file) > tmp-opinit.c
+s-opinit : $(md_file) genopinit$(build_exeext) $(srcdir)/move-if-change
+ ./genopinit$(build_exeext) $(md_file) > tmp-opinit.c
$(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
touch s-opinit
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
insn-extract.c: s-extract ; @true
-s-extract : $(md_file) genextract $(srcdir)/move-if-change
- ./genextract $(md_file) > tmp-extract.c
+s-extract : $(md_file) genextract$(build_exeext) $(srcdir)/move-if-change
+ ./genextract$(build_exeext) $(md_file) > tmp-extract.c
$(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
touch s-extract
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
insn-peep.c: s-peep ; @true
-s-peep : $(md_file) genpeep $(srcdir)/move-if-change
- ./genpeep $(md_file) > tmp-peep.c
+s-peep : $(md_file) genpeep$(build_exeext) $(srcdir)/move-if-change
+ ./genpeep$(build_exeext) $(md_file) > tmp-peep.c
$(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
touch s-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \
- output.h insn-attr.h insn-config.h system.h toplev.h $(RECOG_H)
+ output.h $(INSN_ATTR_H) insn-config.h system.h toplev.h $(RECOG_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
insn-attr.h: s-attr ; @true
-s-attr : $(md_file) genattr $(srcdir)/move-if-change
- ./genattr $(md_file) > tmp-attr.h
+s-attr : $(md_file) genattr$(build_exeext) $(srcdir)/move-if-change
+ ./genattr$(build_exeext) $(md_file) > tmp-attr.h
$(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
touch s-attr
insn-attrtab.c: s-attrtab ; @true
-s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
- ./genattrtab $(md_file) > tmp-attrtab.c
+s-attrtab : $(md_file) genattrtab$(build_exeext) $(srcdir)/move-if-change
+ ./genattrtab$(build_exeext) $(md_file) > tmp-attrtab.c
$(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
touch s-attrtab
insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(GGC_H) $(REGS_H) real.h \
- conditions.h hard-reg-set.h insn-config.h insn-flags.h insn-attr.h \
+ conditions.h hard-reg-set.h insn-config.h insn-flags.h $(INSN_ATTR_H) \
output.h $(RECOG_H) function.h insn-codes.h system.h toplev.h flags.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
insn-output.c: s-output ; @true
-s-output : $(md_file) genoutput $(srcdir)/move-if-change
- ./genoutput $(md_file) > tmp-output.c
+s-output : $(md_file) genoutput$(build_exeext) $(srcdir)/move-if-change
+ ./genoutput$(build_exeext) $(md_file) > tmp-output.c
$(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
touch s-output
genrtl.c genrtl.h : s-genrtl
@true # force gnu make to recheck modification times.
-s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H)
- ./gengenrtl -h >tmp-genrtl.h
+s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change $(RTL_BASE_H)
+ ./gengenrtl$(build_exeext) -h >tmp-genrtl.h
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
- ./gengenrtl >tmp-genrtl.c
+ ./gengenrtl$(build_exeext) >tmp-genrtl.c
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
touch s-genrtl
#\f
# about the target machine. They do depend on config.h itself,
# since that describes the host machine.
-# Pass the md file through cpp if the target requests it.
-$(MD_FILE): $(MD_DEPS)
- rm -f $@
- $(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
- mv tmp-$@ $@
-
gensupport.o: gensupport.c $(RTL_H) $(OBSTACK_H) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gensupport.c
-genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+hashtab.o: $(srcdir)/../libiberty/hashtab.c $(GCONFIG_H)
+ rm -f hashtab.c
+ $(LN_S) $(srcdir)/../libiberty/hashtab.c hashtab.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) hashtab.c
+
+safe-ctype.o: $(srcdir)/../libiberty/safe-ctype.c $(GCONFIG_H)
+ rm -f safe-ctype.c
+ $(LN_S) $(srcdir)/../libiberty/safe-ctype.c safe-ctype.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) safe-ctype.c
+
+genconfig$(build_exeext) : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
-genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genflags$(build_exeext) : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
-gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+gencodes$(build_exeext) : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
-genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genemit$(build_exeext) : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
-genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genopinit$(build_exeext) : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
-genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genrecog$(build_exeext) : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) \
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
-genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+
+genextract$(build_exeext) : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h insn-config.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
-genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genpeep$(build_exeext) : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
-genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genattr$(build_exeext) : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
-genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genattrtab$(build_exeext) : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h $(GGC_H) gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
-genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
+genoutput$(build_exeext) : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
-gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
+gengenrtl$(build_exeext) : gengenrtl.o $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gengenrtl.o $(HOST_LIBS)
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
-$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) \
- bitmap.h $(GGC_H) toplev.h
+$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(GCONFIG_H) system.h $(RTL_H) \
+ bitmap.h $(GGC_H) toplev.h $(HASHTAB_H)
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
$(LN_S) $(srcdir)/../libiberty/alloca.c $(HOST_PREFIX)alloca.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
-$(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H)
+$(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c $(GCONFIG_H)
rm -f $(HOST_PREFIX)obstack.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/obstack.c > $(HOST_PREFIX)obstack.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
intl.o: intl.c intl.h gansidecl.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DLOCALEDIR=\"$(localedir)\" \
- -c `echo $(srcdir)/intl.c | sed 's,^\./,,'`
+ -c $(srcdir)/intl.c
$(top_builddir)/intl/libintl.a: intl.all
# Make sure all the headers are there for xgettext to scan.
-$(INTL_TARGETS): $(srcdir)/c-gperf.h \
- $(srcdir)/c-parse.c $(srcdir)/c-parse.h
+$(INTL_TARGETS): $(CONFIG_H) $(srcdir)/c-parse.c
-intl.all intl.install intl.uninstall intl.distdir \
+intl.all intl.install intl.uninstall \
intl.mostlyclean intl.clean intl.distclean intl.maintainer-clean:
@for d in $(INTL_SUBDIRS); do \
target=`expr $@ : 'intl.\(.*\)'` && \
if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
done
-# intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
-# but we need them for the `make extraclean' in distdir-finish.
-intl.distdir-fixup:
- for d in $(INTL_SUBDIRS); do \
- ln $$d/Makefile tmp/$$d || cp $$d/Makefile tmp/$$d || exit; \
- done
#\f
# Remake cpp and protoize.
PREPROCESSOR_DEFINES = \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
+ -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_target_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o \
- cpphash.o cpperror.o cppinit.o cppulp.o cppdefault.o \
- mkdeps.o prefix.o version.o mbchar.o @extra_cpp_objs@
+ cpphash.o cpperror.o cppinit.o cppdefault.o \
+ mkdeps.o prefix.o version.o mbchar.o
LIBCPP_DEPS = cpplib.h cpphash.h intl.h system.h
-# All the other archives built/used by this makefile are for targets. This
-# one is strictly for the host.
-#
+# Most of the other archives built/used by this makefile are for
+# targets. This one is strictly for the host.
libcpp.a: $(LIBCPP_OBJS)
-rm -rf libcpp.a
$(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS)
if $(RANLIB_TEST) ; then $(RANLIB) libcpp.a ; else true ; fi
-cpp$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cpp$(exeext) cppmain.o \
+cpp0$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cpp0$(exeext) cppmain.o \
intl.o libcpp.a $(LIBS)
cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h system.h
-cppulp.o: cppulp.c $(CONFIG_H) system.h output.h
cpperror.o: cpperror.c $(CONFIG_H) $(LIBCPP_DEPS)
-cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS)
+cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS) defaults.h
cpplex.o: cpplex.c $(CONFIG_H) $(LIBCPP_DEPS)
cppmacro.o: cppmacro.c $(CONFIG_H) $(LIBCPP_DEPS)
cpplib.o: cpplib.c $(CONFIG_H) $(LIBCPP_DEPS) $(OBSTACK_H)
cppdefault.o: cppdefault.c $(CONFIG_H) system.h cppdefault.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(PREPROCESSOR_DEFINES) \
- -c `echo $(srcdir)/cppdefault.c | sed 's,^\./,,'`
+ -c $(srcdir)/cppdefault.c
mkdeps.o: mkdeps.c $(CONFIG_H) system.h mkdeps.h
# The traditional mode preprocessor, a separate program for ease of
# maintenance. Some code is shared with the ISO-C cpp.
-tradcpp$(exeext): tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o tradcpp$(exeext) \
+tradcpp0$(exeext): tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o tradcpp0$(exeext) \
tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBS)
-tradcpp.o: tradcpp.c $(CONFIG_H) system.h version.h cppdefault.h
-tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) system.h
+tradcpp.o: tradcpp.c $(CONFIG_H) system.h version.h cppdefault.h tradcpp.h
+tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) system.h defaults.h tradcpp.h
$(srcdir)/tradcif.c: $(srcdir)/tradcif.y
- cd $(srcdir); $(BISON) $(BISONFLAGS) -o tradcif.c tradcif.y
+ (cd $(srcdir) && $(BISON) $(BISONFLAGS) -o tr$$$$.c tradcif.y && \
+ mv -f tr$$$$.c tradcif.c)
# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).
Makefile version.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
- $(srcdir)/protoize.c
+ $(srcdir)/protoize.c $(OUTPUT_OPTION)
unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \
$(CONFIG_H) system.h Makefile version.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
- $(srcdir)/unprotoize.c
+ $(srcdir)/unprotoize.c $(OUTPUT_OPTION)
# This info describes the target machine, so compile with GCC just built.
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
diff $(srcdir)/protoize.c tmp-proto.c | cat
-rm -f tmp-proto.[cs] tmp-proto$(objext)
-gcov.o: gcov.c gcov-io.h intl.h system.h
+gcov.o: gcov.c gcov-io.h intl.h system.h $(CONFIG_H)
# Only one of 'gcov' or 'gcov.exe' is actually built, depending
# upon whether $(exeext) is empty or not.
$(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/gnu-regex.c \
$(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \
$(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready
- MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
- export MAKE srcdir ; \
- cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target)
+ (MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc && pwd` ; \
+ CC="$(CC)"; CFLAGS="$(CFLAGS)"; LDFLAGS="$(LDFLAGS)"; \
+ WARN_CFLAGS="$(WARN_CFLAGS)"; \
+ export MAKE srcdir CC CFLAGS LDFLAGS WARN_CFLAGS; cd ./fixinc && \
+ $(SHELL) $${srcdir}/mkfixinc.sh $(build_canonical) $(target))
# Build fixed copies of system files.
stmp-fixinc: fixinc.sh gsyslimits.h
rm -rf include; mkdir include
-chmod a+rx include
- TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \
+ (TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \
INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); SHELL=$(SHELL) ;\
export TARGET_MACHINE srcdir INSTALL_ASSERT_H SHELL ; \
- $(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS)
- rm -f include/syslimits.h
+ $(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \
+ rm -f include/syslimits.h; \
if [ -f include/limits.h ]; then \
mv include/limits.h include/syslimits.h; \
else \
cp $(srcdir)/gsyslimits.h include/syslimits.h; \
- fi
- chmod a+r include/syslimits.h
+ fi; \
+ chmod a+r include/syslimits.h)
# If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
# that directory exists, then make sure that $(libsubdir) exists.
# This is because cpp is compiled to find $(tooldir)/include via
fi
GEN_PROTOS_OBJS = gen-protos.o scan.o
-gen-protos: $(GEN_PROTOS_OBJS)
- ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gen-protos \
+gen-protos$(build_exeext): $(GEN_PROTOS_OBJS)
+ ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
$(GEN_PROTOS_OBJS) ../libiberty/libiberty.a
gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h
scan.o: scan.c scan.h $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
-xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
+xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos$(build_exeext) Makefile
sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
mv tmp-fixtmp.c fixtmp.c
# Remake the info files.
doc: $(BUILD_INFO) gccbug
-info: cpp.info gcc.info lang.info
+info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info $(srcdir)/c-tree.info
-cpp.info: $(srcdir)/cpp.texi
- $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi
+$(srcdir)/cpp.info: $(srcdir)/cpp.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o cpp.info cpp.texi
-gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
+$(srcdir)/gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
$(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
$(srcdir)/tm.texi $(srcdir)/gcov.texi
- $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o gcc.info gcc.texi
+
+$(srcdir)/c-tree.info: $(srcdir)/c-tree.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o c-tree.info \
+ c-tree.texi
dvi: gcc.dvi cpp.dvi lang.dvi
texindex cpp.??
TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
+$(srcdir)/gcov.1: $(srcdir)/gcov.texi
+ $(TEXI2POD) < $(srcdir)/gcov.texi > gcov.pod
+ ($(POD2MAN) gcov.pod > $(srcdir)/gcov.1.T$$$$ && \
+ mv -f $(srcdir)/gcov.1.T$$$$ $(srcdir)/gcov.1) || \
+ (rm -f $(srcdir)/gcov.1.T$$$$ && exit 1)
+ rm -f gcov.pod
-INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
- cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \
- --no-split --no-headers -o INSTALL install1.texi
#\f
# Deletion of files made during compilation.
# There are four levels of this:
INTL_MOSTLYCLEAN = intl.mostlyclean
mostlyclean: $(INTL_MOSTLYCLEAN) lang.mostlyclean
-rm -f $(STAGESTUFF)
+ -rm -rf libgcc
# Delete the temporary source copies for cross compilation.
-rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
-rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
-rm -f collect collect2 mips-tfile mips-tdump alloca.s
# Delete files generated for fixproto
-rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
- gen-protos fixproto.list fixtmp.* fixhdr.ready
+ gen-protos$(build_exeext) fixproto.list fixtmp.* fixhdr.ready
# Delete files generated for fixincl
-rm -rf fixincl fixinc.sh specs.ready
(cd fixinc && $(MAKE) clean)
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
- -rm -f libgcc.a
+ -rm -f libgcc.a libgcc_s$(SHLIB_EXT)
-rm -rf libgcc
-rm -f *.dvi
-rm -f */*.dvi
- -if [ -f md.pre-cpp ]; then \
- rm -f md ; \
- fi
# Delete the include directory.
-rm -rf include
# Delete files used by the "multilib" facility (including libgcc subdirs).
rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
fi ; fi
-rm -fr stage1 stage2 stage3 stage4
+# Delete stamps of bootstrap stages
+ -rm -f stage_*
+ -rm -f clean_*
# Delete all files that users would normally create
# while building and installing GCC.
INTL_DISTCLEAN = intl.distclean
distclean: clean $(INTL_DISTCLEAN) lang.distclean
-rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
- -rm -f md cstamp-h
+ -rm -f cstamp-h
-rm -f config.status config.run config.cache config.bak
-rm -f Make-lang Make-hooks Make-host Make-target
-rm -f Makefile specs.h options.h gencheck.h *.oaux
-rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
-rm -f testsuite/{gcc,g++}.{log,sum}
-rm -f intl/libintl.h libintl.h
+ -rm -f cxxmain.c splay-tree.c obstack.c alloca.c hashtab.c safe-ctype.c
+ -rm -f mklibgcc libgcc.map gccbug .gdbinit configargs.h
+ -rm -f gcov.pod
+ -rm -f fixinc/Makefile
+ -rmdir cp f java objc fixinc intl po 2>/dev/null
# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
@echo 'deletes files that may need special tools to rebuild.'
$(MAKE) INTL_DISTCLEAN= INTL_CLEAN= INTL_MOSTLYCLEAN= \
intl.maintainer-clean lang.maintainer-clean distclean
- -rm -f c-parse.y c-gperf.h
- -rm -f c-parse.c c-parse.h c-parse.output TAGS
- -rm -f cpp.info* cpp.??s cpp.*aux
- -rm -f gcc.info* gcc.??s gcc.*aux
+ -rm -f c-parse.y c-parse.c c-parse.output TAGS
+ -rm -f cpp.??s cpp.*aux
+ -rm -f gcc.??s gcc.*aux
+ -rm -f $(srcdir)/cpp.info* $(srcdir)/gcc.info* $(srcdir)/c-tree.info*
+ -rm -f $(srcdir)/gcov.1
#\f
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
- $(INSTALL_CPP) install-man $(INSTALL_INFO) intl.install \
+ $(INSTALL_CPP) install-man install-info intl.install \
lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
install-cross-rest: install-float-h-cross
# Handle cpp installation.
-install-cpp: xcpp$(exeext)
+install-cpp: cpp$(exeext)
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(bindir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(bindir)/$(CPP_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(bindir)/$(CPP_CROSS_NAME)$(exeext); \
if [ x$(cpp_install_dir) != x ]; then \
rm -f $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
else true; fi; \
else \
rm -f $(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
if [ x$(cpp_install_dir) != x ]; then \
rm -f $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
else true; fi; \
fi
$(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
chmod a-x $(libsubdir)/SYSCALLS.c.X; \
fi
- -rm -f $(libsubdir)/cpp$(exeext)
- $(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
- -rm -f $(libsubdir)/tradcpp$(exeext)
- $(INSTALL_PROGRAM) tradcpp$(exeext) $(libsubdir)/tradcpp$(exeext)
+ -rm -f $(libsubdir)/cpp0$(exeext)
+ $(INSTALL_PROGRAM) cpp0$(exeext) $(libsubdir)/cpp0$(exeext)
+ -rm -f $(libsubdir)/tradcpp0$(exeext)
+ $(INSTALL_PROGRAM) tradcpp0$(exeext) $(libsubdir)/tradcpp0$(exeext)
# Install gcov if it was compiled.
-if [ -f gcov$(exeext) ]; \
then \
# to do the install.
install-info: doc installdirs lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
- for f in cpp.info* gcc.info*; do \
- $(INSTALL_DATA) $$f $(infodir)/$$f; \
- done
+ if [ -f $(srcdir)/gcc.info ]; then \
+ for f in $(srcdir)/cpp.info* $(srcdir)/gcc.info*; do \
+ realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
+ $(INSTALL_DATA) $$f $(infodir)/$$realfile; \
+ done; \
+ else true; fi
-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
if [ -f $(infodir)/dir ] ; then \
for f in cpp.info gcc.info; do \
- install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
+ if [ -f $(infodir)/$$f ]; then \
+ install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
+ else true; fi \
done; \
else true; fi; \
else true; fi;
-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
# Install the man pages.
-install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cpp.1 lang.install-man
+install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cpp.1 $(srcdir)/gcov.1 lang.install-man
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
fi
-rm -f $(man1dir)/cpp$(manext)
-$(INSTALL_DATA) $(srcdir)/cpp.1 $(man1dir)/cpp$(manext)
+ -rm -f $(man1dir)/gcov$(manext)
+ -$(INSTALL_DATA) $(srcdir)/gcov.1 $(man1dir)/gcov$(manext)
-chmod a-x $(man1dir)/cpp$(manext)
# Install the library.
# CFLAGS is set even though it's empty to show we reserve the right to set it.
@echo "set CFLAGS \"\"" >> ./tmp0
@echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0
+ @echo "set HAVE_LIBSTDCXX_V3 @HAVE_LIBSTDCXX_V3@" >> ./tmp0
# If newlib has been configured, we need to pass -B to gcc so it can find
# newlib's crt0.o if it exists. This will cause a "path prefix not used"
# message if it doesn't, but the testsuite is supposed to ignore the message -
-e '1,/^## All variables above are.*##/ d' >> site.exp
-@rm -f ./tmp?
-CHECK_TARGETS = check-gcc check-g++ check-g77 check-objc
+CHECK_TARGETS = check-gcc check-g++ check-g77 check-objc @CHECK_PO@
check: $(CHECK_TARGETS)
cp site.exp testsuite/site.exp
check-g++: testsuite/site.exp
- -rootme=`pwd`; export rootme; \
+ -(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
- $(RUNTEST) --tool g++ $(RUNTESTFLAGS)
+ $(RUNTEST) --tool g++ $(RUNTESTFLAGS))
check-gcc: testsuite/site.exp
- -rootme=`pwd`; export rootme; \
+ -(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
- $(RUNTEST) --tool gcc $(RUNTESTFLAGS)
+ $(RUNTEST) --tool gcc $(RUNTESTFLAGS))
check-g77: testsuite/site.exp
- -rootme=`pwd`; export rootme; \
+ -(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
- $(RUNTEST) --tool g77 $(RUNTESTFLAGS)
+ $(RUNTEST) --tool g77 $(RUNTESTFLAGS))
check-objc: testsuite/site.exp
- -rootme=`pwd`; export rootme; \
+ -(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
- $(RUNTEST) --tool objc $(RUNTESTFLAGS)
+ $(RUNTEST) --tool objc $(RUNTESTFLAGS))
+
+check-po:
+ if test -f cp/Makefile && test -f f/Makefile && \
+ test -f java/Makefile && test -f objc/Makefile; then \
+ $(MAKE) -C po check-po; \
+ fi
# These exist for maintenance purposes.
# Update the tags table.
TAGS: force
- cd $(srcdir); \
+ (cd $(srcdir); \
mkdir tmp-tags; \
mv -f c-parse.[ch] =*.[chy] tmp-tags; \
etags *.y *.h *.c; \
mv tmp-tags/* .; \
- rmdir tmp-tags
-
-# Create the distribution tar.gz file.
-dist: tmp-gcc.xtar
- gzip --best < tmp-gcc.xtar > tmp-gcc.xtar.gz
- mv tmp-gcc.xtar.gz gcc-$(version).tar.gz
-
-tmp-gcc.xtar: distdir
-# Make the distribution.
- tar -chf tmp-gcc.xtar gcc-$(version)
-
-distdir-cvs: force
- if [ -d $(srcdir)/CVS ]; then cd $(srcdir) && cvs -r update; fi
-
-# This target exists to do the initial work before the language specific
-# stuff gets done.
-distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
- $(srcdir)/c-parse.c $(srcdir)/config.in $(srcdir)/version.c TAGS
- @case '$(USE_NLS)' in \
- yes) ;; \
- *) echo "configure with --enable-nls before making a distribution"; \
- exit 1;; \
- esac
- @if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
- then true; \
- else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
- fi
-# Update the version number in README
- $(AWK) '$$1 " " $$2 " " $$3 == "This directory contains" \
- { $$6 = version; print $$0 } \
- $$1 " " $$2 " " $$3 != "This directory contains"' \
- version=$(version) $(srcdir)/README > tmp.README
- mv tmp.README README
- -rm -rf gcc-$(version) tmp
-# Put all the files in a temporary subdirectory
-# which has the name that we want to have in the tar file.
- mkdir tmp
- mkdir tmp/config
- mkdir tmp/ginclude
- mkdir tmp/objc
- mkdir tmp/intl
- mkdir tmp/po
- for file in `(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
- test -f $(srcdir)/$$file && $(LN_S) $(srcdir)/$$file tmp; \
- done
- if test "$(srcdir)" != "." ; then \
- for file in c-parse.c ; do \
- test -f ./$$file && $(LN_S) ../$$file tmp; \
- done; \
- fi
- for file in `(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
- if test -d $(srcdir)/config/$$file \
- && test "$$file" != RCS && test "$$file" != CVS; then \
- mkdir tmp/config/$$file; \
- for subfile in `(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
- $(LN_S) $(srcdir)/config/$$file/$$subfile tmp/config/$$file; \
- done; \
- else \
- $(LN_S) $(srcdir)/config/$$file tmp/config; \
- fi; \
- done
- for file in `(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
- $(LN_S) $(srcdir)/ginclude/$$file tmp/ginclude; \
- done
- for file in `(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
- $(LN_S) $(srcdir)/objc/$$file tmp/objc; \
- done
- $(LN_S) .gdbinit tmp
-
-# Finish making `distdir', after the languages have done their thing.
-distdir-finish:
- mv tmp gcc-$(version)
-# Get rid of everything we don't want in the distribution. We'd want
-# this to use Makefile.in, but it doesn't have the `lang.foo' targets
-# expanded.
- cd gcc-$(version); make extraclean distdir-check VERSION_DEP=
-
-distdir-check:
- ($(AWK) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' | sort) \
- < po/POTFILES.in > tmp.POTFILES
- ls [A-Za-z]*.[ch] [a-z]*/[A-Za-z]*.[ch] \
- [a-z]*/[a-z]*/[A-Za-z]*.[ch] | sort > tmp.src
- diff tmp.POTFILES tmp.src || { \
- echo "po/POTFILES.in and sources do not match -- please fix"; \
- exit 1; \
- }
- rm -f tmp.*
-
-distdir: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
- lang.distdir distdir-finish
-
-# make diff oldversion=M.N
-# creates a diff file between an older distribution and this one.
-# The -P option assumes this is GNU diff.
-diff:
- diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
- -x TAGS -x INSTALL -x configure -x config.in \
- -x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
- -x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
- $(LANG_DIFF_EXCLUDES) \
- gcc-$(oldversion) gcc-$(version) > gcc-$(oldversion)-$(version).diff
+ rmdir tmp-tags)
# A list of files to be destroyed during "lean" builds.
-VOL_FILES=`echo $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*`
+VOL_FILES=`echo $(BACKEND) $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*`
+
+# Flags to pass to stage2 and later recursive makes. Note that the
+# WARN_CFLAGS setting can't be to the expansion of GCC_WARN_CFLAGS in
+# the context of the stage_x rule.
+STAGE2_FLAGS_TO_PASS = \
+ CFLAGS="$(BOOT_CFLAGS)" \
+ LDFLAGS="$(BOOT_LDFLAGS)" \
+ WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
+ STRICT_WARN="$(STRICT2_WARN)" \
+ libdir=$(libdir) \
+ LANGUAGES="$(LANGUAGES)" \
+ OUTPUT_OPTION="-o \$$@"
-bootstrap bootstrap-lean: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
- $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" LANG_LIB2FUNCS=
+stage_a:
+ +$(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
+ touch stage_a
+
+stage_b: stage_a
$(MAKE) stage1
- -if test $@ = bootstrap-lean; then cd stage1 ; rm -f $(VOL_FILES); else true; fi
+ touch stage_b
+
# This used to define ALLOCA as empty, but that would lead to bad results
# for a subsequent `make install' since that would not have ALLOCA empty.
# To prevent `make install' from compiling alloca.o and then relinking cc1
# because alloca.o is newer, we permit these recursive makes to compile
# alloca.o. Then cc1 is newer, so it won't have to be relinked.
- $(MAKE) CC="stage1/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
- $(MAKE) stage2
- -if test $@ = bootstrap-lean; then rm -rf stage1; cd stage2 ; rm -f $(VOL_FILES); else true; fi
- $(MAKE) CC="stage2/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
-
-bootstrap2 bootstrap2-lean: force
- $(MAKE) CC="stage1/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
- $(MAKE) stage2
- -if test $@ = bootstrap2-lean; then rm -rf stage1; cd stage2 ; rm -f $(VOL_FILES); else true; fi
- $(MAKE) CC="stage2/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
-
-bootstrap3 bootstrap3-lean: force
- $(MAKE) CC="stage2/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
-
-bootstrap4 bootstrap4-lean: force
- $(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"
+stage_c: stage_b
+ +$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
+ STAGE_PREFIX=stage1/ \
+ $(STAGE2_FLAGS_TO_PASS)
+ touch stage_c
+
+stage_d: stage_c
+ +$(MAKE) stage2
+ touch stage_d
+
+stage_e: stage_d
+ +$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \
+ STAGE_PREFIX=stage2/ \
+ $(STAGE2_FLAGS_TO_PASS)
+ touch stage_e
+
+# For bootstrap4:
+stage_f: stage_e
+ +$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" \
+ STAGE_PREFIX=stage3/ \
+ $(STAGE2_FLAGS_TO_PASS)
+ touch stage_f
+
+# Additional steps for *-lean targets:
+clean_s1: stage_b
+ -(cd stage1 && rm -f $(VOL_FILES))
+ touch clean_s1
+
+clean_s2: stage_d
+ -rm -rf stage1
+ touch clean_s2
+
+# This next little bit is the way it is for parallel builds. It's simply
+# a chain of stages which DO have to be done sequentially.
+
+bootstrap_a: stage_a
+bootstrap_b: bootstrap_a stage_b
+bootstrap_c: bootstrap_b stage_c
+bootstrap_d: bootstrap_c stage_d
+bootstrap_e: bootstrap_d stage_e
+bootstrap: force bootstrap_e
+
+bootstrap-lean_a: stage_a
+bootstrap-lean_b: bootstrap-lean_a stage_b
+bootstrap-lean_c: bootstrap-lean_b clean_s1
+bootstrap-lean_d: bootstrap-lean_c stage_c
+bootstrap-lean_e: bootstrap-lean_d stage_d
+bootstrap-lean_f: bootstrap-lean_e clean_s2
+bootstrap-lean_g: bootstrap-lean_f stage_e
+bootstrap-lean: force bootstrap-lean_g
+
+bootstrap2_c: stage_c
+bootstrap2_d: bootstrap2_c stage_d
+bootstrap2_e: bootstrap2_d stage_e
+bootstrap2: force bootstrap2_e
+
+bootstrap2-lean_c: stage_c
+bootstrap2-lean_d: bootstrap2-lean_c stage_d
+bootstrap2-lean_e: bootstrap2-lean_d clean_s2
+bootstrap2-lean_f: bootstrap2-lean_e stage_e
+bootstrap2-lean: force bootstrap2-lean_f
+
+bootstrap3 bootstrap3-lean: force stage_e
+
+bootstrap4 bootstrap4-lean: force stage_f
# Compare the object files in the current directory with those in the
# stage2 directory.
# Copy the object files from a particular stage into a subdirectory.
stage1-start:
-if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
+ $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage1
-for dir in intl $(SUBDIRS) ; \
do \
if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
stage2-start:
-if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
+ $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage2
-for dir in intl $(SUBDIRS) ; \
do \
if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
stage3-start:
-if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
+ $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage3
-for dir in intl $(SUBDIRS) ; \
do \
if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
stage4-start:
-if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
+ $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage4
-for dir in intl $(SUBDIRS) ; \
do \
if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
# and delete the object files. Use this if you're just verifying a version
# that is pretty sure to work, and you are short of disk space.
risky-stage1: stage1
- -make clean
+ -$(MAKE) clean
risky-stage2: stage2
- -make clean
+ -$(MAKE) clean
risky-stage3: stage3
- -make clean
+ -$(MAKE) clean
risky-stage4: stage4
- -make clean
+ -$(MAKE) clean
#In GNU Make, ignore whether `stage*' exists.
.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap