# Run 'configure' to generate Makefile from Makefile.in
# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
-# 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
# Free Software Foundation, Inc.
#This file is part of GCC.
# The targets for external use include:
# all, doc, proto, install, install-cross, install-cross-rest,
-# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
-# stage1, stage2, stage3, stage4.
+# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean.
# This is the default target.
# Set by autoconf to "all.internal" for a native build, or
# "all.cross" to build a cross compiler.
all: @ALL@
+# Provide quickstrap as a target that people can type into the gcc directory,
+# and that fails if you're not into it.
+quickstrap: all
+
# Depend on this to specify a phony target portably.
force:
CONFIG_LANGUAGES = @all_selected_languages@
LANGUAGES = c gcov$(exeext) gcov-dump$(exeext) $(CONFIG_LANGUAGES)
-# Selection of languages to be made during stage1 build.
-BOOT_LANGUAGES = c @all_boot_languages@
-
# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a cross build with -O2.
-# For recursive bootstrap builds CFLAGS is used to pass in STAGE1_CFLAGS
-# or BOOT_CFLAGS
-# STAGE1_CFLAGS is set by configure on some targets or passed from toplevel
-# and sets the CFLAGS passed to stage1 of a bootstrap compilation.
-# STAGE1_CHECKING enables checking for the stage1 compiler
-# BOOT_CFLAGS is the value of CFLAGS to pass to the stage2, stage3 and stage4
-# bootstrap compilations.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
XCFLAGS =
TCFLAGS =
CFLAGS = @CFLAGS@
LDFLAGS = @LDFLAGS@
-STAGE1_CFLAGS = -g @stage1_cflags@
-STAGE1_CHECKING = -DENABLE_CHECKING -DENABLE_ASSERT_CHECKING
-BOOT_CFLAGS = -g -O2
# Flags to determine code coverage. When coverage is disabled, this will
# contain the optimization flags, as you normally want code coverage
COVERAGE_FLAGS = @coverage_flags@
coverageexts = .{gcda,gcno}
-# The warning flags are separate from BOOT_CFLAGS because people tend to
+# The warning flags are separate from CFLAGS because people tend to
# override optimization flags and we'd like them to still have warnings
# turned on. These flags are also used to pass other stage dependent
# flags from configure. The user is free to explicitly turn these flags
# LOOSE_WARN are the warning flags to use when compiling something
# which is only compiled with gcc, such as libgcc and the frontends
# other than C.
-# STRICT_WARN and STRICT2_WARN are the additional warning flags to
+# STRICT_WARN are the additional warning flags to
# apply to the back end and the C front end, which may be compiled
-# with other compilers. This is partially controlled by configure in
-# stage1, as not all versions of gcc understand -Wno-long-long or
-# -Wno-variadic-macros.
+# with other compilers.
# CXX_COMPAT_WARN are C++ source compatibility warnings.
LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
-STRICT_WARN = @strict1_warn@
-WERROR_FLAGS = @WERROR@
-STRICT2_WARN = -pedantic -Wno-long-long -Wno-variadic-macros \
- -Wno-overlength-strings -Wold-style-definition -Wmissing-format-attribute \
- $(WERROR_FLAGS)
+STRICT_WARN = @strict_warn@
CXX_COMPAT_WARN = @cxx_compat_warn@
# This is set by --enable-checking. The idea is to catch forgotten
# Make sure the $(MAKE) variable is defined.
@SET_MAKE@
-REMAKEFLAGS=LANGUAGES="$(LANGUAGES)" BOOT_CFLAGS="$(BOOT_CFLAGS)"
# Locate mkinstalldirs.
mkinstalldirs=$(SHELL) $(srcdir)/../mkinstalldirs
UNWIND_H = $(srcdir)/unwind-generic.h
-# The GCC to use for compiling libgcc.a and crt*.o.
+# The GCC to use for compiling crt*.o.
# Usually the one we just built.
-# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
+# Don't use this as a dependency--use $(GCC_PASSES).
GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include -L$(objdir)/../ld
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# If a supplementary library is being used for the GC.
GGC_LIB=
-# libgcc.a may be built directly or via stmp-multilib,
-# and installed likewise. Overridden by t-fragment.
-LIBGCC = libgcc.a
-INSTALL_LIBGCC = install-libgcc
-
# "true" if the target C library headers are unavailable; "false"
# otherwise.
inhibit_libc = @inhibit_libc@
# to compile anything (without linking).
GCC_PASSES=xgcc$(exeext) cc1$(exeext) specs $(EXTRA_PASSES)
-# List of things which should already be built whenever we try to use xgcc
-# to link anything.
-GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(COLLECT2) $(EXTRA_PARTS)
-
# Directory to link to, when using the target `maketest'.
DIR = ../gcc
# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
T =
-# Should T contain a `=', libgcc.mk will make T_TARGET, setting
+# Should T contain a `=', libgcc/Makefile will make T_TARGET, setting
# $(T_TARGET) to the name of the actual target filename.
T_TARGET =
T_TARGET : $(T_TARGET)
# IN_GCC distinguishes between code compiled into GCC itself and other
# programs built during a bootstrap.
-# autoconf inserts -DCROSS_COMPILE if we are building a cross compiler.
+# autoconf inserts -DCROSS_DIRECTORY_STRUCTURE if we are building a
+# cross compiler which does not use the native headers and libraries.
INTERNAL_CFLAGS = -DIN_GCC @CROSS@
# This is the variable actually used when we compile. If you change this,
LANG_MAKEFRAGS = @all_lang_makefrags@
LANG_MAKEFILES = @all_lang_makefiles@
-LANG_STAGESTUFF = @all_stagestuff@
# Flags to pass to recursive makes.
-# CC is set by configure. Hosts without symlinks need special handling
-# because we need CC="stage1/xgcc -Bstage1/" to work in the language
-# subdirectories.
+# CC is set by configure.
# ??? The choices here will need some experimenting with.
export AR_FOR_TARGET
export libsubdir
export slibdir
-ORDINARY_FLAGS_TO_PASS = \
+FLAGS_TO_PASS = \
"BISON=$(BISON)" \
"BISONFLAGS=$(BISONFLAGS)" \
"CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
"libexecsubdir=$(libsubdir)" \
"datadir=$(datadir)" \
"localedir=$(localedir)"
-FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) "CC=@cc_set_by_configure@" \
- "STAGE_PREFIX=@stage_prefix_set_by_configure@"
-PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \
- -e 's|^ *[^ /][^ /]*/|%&|' \
- -e 's| -B| -B%|g' \
- -e 's|% *[^- /]|%&|g' \
- -e 's|%% *|../|g' \
- -e 's|%||g'
-SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \
- "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" \
- "STAGE_PREFIX=`echo @quoted_stage_prefix_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
#\f
# Lists of files for various purposes.
OBJS-common = \
double-int.o tree-chrec.o tree-scalar-evolution.o tree-data-ref.o \
tree-cfg.o tree-dfa.o tree-eh.o tree-ssa.o tree-optimize.o tree-gimple.o \
- gimplify.o tree-pretty-print.o tree-into-ssa.o \
+ gimplify.o tree-pretty-print.o tree-into-ssa.o tree-ssa-ter.o \
tree-outof-ssa.o tree-ssa-ccp.o tree-vn.o tree-ssa-uncprop.o \
tree-ssa-dce.o tree-ssa-copy.o tree-nrv.o tree-ssa-copyrename.o \
tree-ssa-pre.o tree-ssa-live.o tree-ssa-operands.o tree-ssa-alias.o \
tree-vect-generic.o tree-ssa-loop.o tree-ssa-loop-niter.o \
tree-ssa-loop-manip.o tree-ssa-threadupdate.o tree-ssa-threadedge.o \
tree-vectorizer.o tree-vect-analyze.o tree-vect-transform.o \
- tree-vect-patterns.o tree-ssa-loop-prefetch.o \
+ tree-vect-patterns.o tree-ssa-loop-prefetch.o tree-ssa-coalesce.o \
tree-ssa-loop-ivcanon.o tree-ssa-propagate.o tree-ssa-address.o \
- tree-ssa-math-opts.o \
+ tree-ssa-math-opts.o tree-affine.o \
tree-ssa-loop-ivopts.o tree-if-conv.o tree-ssa-loop-unswitch.o \
alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \
cfgloopanal.o cfgloopmanip.o loop-init.o loop-unswitch.o loop-unroll.o \
- cfgrtl.o combine.o conflict.o convert.o coverage.o cse.o cselib.o \
+ cfgrtl.o combine.o convert.o coverage.o cse.o cselib.o \
dbxout.o ddg.o tree-ssa-loop-ch.o loop-invariant.o tree-ssa-loop-im.o \
debug.o df-core.o df-problems.o df-scan.o dfp.o diagnostic.o dojump.o \
dominance.o loop-doloop.o \
OBJS-md = $(out_object_file)
OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) tree-inline.o \
- cgraph.o cgraphunit.o tree-nomudflap.o ipa.o ipa-inline.o \
+ cgraph.o cgraphunit.o cgraphbuild.o tree-nomudflap.o ipa.o ipa-inline.o \
ipa-utils.o ipa-reference.o ipa-pure-const.o ipa-type-escape.o \
- ipa-prop.o ipa-cp.o
+ ipa-prop.o ipa-cp.o varpool.o
OBJS = $(OBJS-common) $(out_object_file) $(OBJS-archive)
BACKEND = main.o @TREEBROWSER@ libbackend.a $(CPPLIB) $(LIBDECNUMBER)
-# Files to be copied after each stage in building.
-STAGECOPYSTUFF = insn-flags.h insn-config.h insn-codes.h \
+MOSTLYCLEANFILES = insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c insn-preds.c insn-constants.h \
tm-preds.h tm-constrs.h \
tree-check.h min-insn-modes.c insn-modes.c insn-modes.h \
- genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-gen.h
-
-# Files to be moved away after each stage in building.
-STAGEMOVESTUFF = *$(objext) s-* \
+ genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-gen.h \
xgcc$(exeext) cpp$(exeext) cc1$(exeext) cc1*-dummy$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
protoize$(exeext) unprotoize$(exeext) \
$(SPECS) collect2$(exeext) \
gcov-iov$(build_exeext) gcov$(exeext) gcov-dump$(exeext) \
- *.[0-9][0-9].* *.[si] *-checksum.c libbackend.a libgcc.mk \
- $(LANG_STAGESTUFF)
+ *.[0-9][0-9].* *.[si] *-checksum.c libbackend.a libgcc.mk
# Defined in libgcc2.c, included only in the static library.
LIB2FUNCS_ST = _eprintf __gcc_bcmp
# install-common, install-info, install-man,
# uninstall,
# mostlyclean, clean, distclean, maintainer-clean,
-# stage1, stage2, stage3, stage4
#
# Each language is linked in with a series of hooks. The name of each
# hooked is "lang.${target_name}" (eg: lang.info). Configure computes
gccbug: $(srcdir)/gccbug.in
CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
-mklibgcc: $(srcdir)/mklibgcc.in
- CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
-
# cstamp-h.in controls rebuilding of config.in.
# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
# delete it. A stamp file is needed as autoheader won't update the file if
all.internal: start.encap rest.encap doc
# This is what to compile if making a cross-compiler.
all.cross: native gcc-cross$(exeext) cpp$(exeext) specs \
- $(LIBGCC) $(EXTRA_PARTS) lang.all.cross doc @GENINSRC@ srcextra
+ libgcc-support lang.all.cross doc @GENINSRC@ srcextra
# This is what must be made before installing GCC and converting libraries.
start.encap: native xgcc$(exeext) cpp$(exeext) specs \
- xlimits.h lang.start.encap @GENINSRC@ srcextra
+ libgcc-support xlimits.h lang.start.encap @GENINSRC@ srcextra
# These can't be made until after GCC can run.
-rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
+rest.encap: $(STMP_FIXPROTO) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
native: config.status auto-host.h build-@POSUB@ $(LANGUAGES) \
# On the target machine, finish building a cross compiler.
# This does the things that can't be done on the host machine.
-rest.cross: $(LIBGCC) specs
+rest.cross: specs
# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
LIB2ADD = $(LIB2FUNCS_EXTRA)
LIB2ADD_ST = $(LIB2FUNCS_STATIC_EXTRA)
-libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) $(LIB2ADD_ST) specs \
+# All source files for libgcc are either in the source directory (in
+# which case they will start with $(srcdir)), or generated into the build
+# directory (in which case they will be relative paths).
+srcdirify = $(patsubst $(srcdir)%,$$(gcc_srcdir)%,$(filter $(srcdir)%,$(1))) \
+ $(patsubst %,$$(gcc_objdir)/%,$(filter-out $(srcdir)%,$(1)))
+
+# The distinction between these two variables is no longer relevant,
+# so we combine them. Sort removes duplicates.
+GCC_EXTRA_PARTS := $(sort $(EXTRA_MULTILIB_PARTS) $(EXTRA_PARTS))
+
+libgcc-support: libgcc.mvars stmp-int-hdrs $(STMP_FIXPROTO) $(TCONFIG_H) \
+ $(MACHMODE_H) $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \
+ $(LIB2ADD_ST) $(LIB2ADDEH) gcov-iov.h $(SFP_MACHINE)
+
+libgcc.mvars: config.status Makefile $(LIB2ADD) $(LIB2ADD_ST) specs \
xgcc$(exeext) stamp-as stamp-collect-ld stamp-nm
- objext='$(objext)' \
- LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \
- LIB2FUNCS_ST='$(LIB2FUNCS_ST)' \
- LIB2FUNCS_EXCLUDE='$(LIB2FUNCS_EXCLUDE)' \
- LIBGCOV='$(LIBGCOV)' \
- LIB2ADD='$(LIB2ADD)' \
- LIB2ADD_ST='$(LIB2ADD_ST)' \
- LIB2ADDEH='$(LIB2ADDEH)' \
- LIB2ADDEHSTATIC='$(LIB2ADDEHSTATIC)' \
- LIB2ADDEHSHARED='$(LIB2ADDEHSHARED)' \
- LIB2ADDEHDEP='$(LIB2ADDEHDEP)' \
- LIB2_SIDITI_CONV_FUNCS='$(LIB2_SIDITI_CONV_FUNCS)' \
- LIBUNWIND='$(LIBUNWIND)' \
- LIBUNWINDDEP='$(LIBUNWINDDEP)' \
- SHLIBUNWIND_LINK='$(SHLIBUNWIND_LINK)' \
- SHLIBUNWIND_INSTALL='$(SHLIBUNWIND_INSTALL)' \
- FPBIT='$(FPBIT)' \
- FPBIT_FUNCS='$(FPBIT_FUNCS)' \
- LIB2_DIVMOD_FUNCS='$(LIB2_DIVMOD_FUNCS)' \
- DPBIT='$(DPBIT)' \
- DPBIT_FUNCS='$(DPBIT_FUNCS)' \
- TPBIT='$(TPBIT)' \
- TPBIT_FUNCS='$(TPBIT_FUNCS)' \
- DFP_ENABLE='$(DFP_ENABLE)' \
- DFP_CFLAGS='$(DFP_CFLAGS)' \
- D32PBIT='$(D32PBIT)' \
- D32PBIT_FUNCS='$(D32PBIT_FUNCS)' \
- D64PBIT='$(D64PBIT)' \
- D64PBIT_FUNCS='$(D64PBIT_FUNCS)' \
- D128PBIT='$(D128PBIT)' \
- D128PBIT_FUNCS='$(D128PBIT_FUNCS)' \
- MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
- EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
- SHLIB_LINK='$(SHLIB_LINK)' \
- SHLIB_INSTALL='$(SHLIB_INSTALL)' \
- SHLIB_EXT='$(SHLIB_EXT)' \
- SHLIB_MULTILIB='$(SHLIB_MULTILIB)' \
- SHLIB_MKMAP='$(SHLIB_MKMAP)' \
- SHLIB_MKMAP_OPTS='$(SHLIB_MKMAP_OPTS)' \
- SHLIB_MAPFILES='$(SHLIB_MAPFILES)' \
- SHLIB_NM_FLAGS='$(SHLIB_NM_FLAGS)' \
- MULTILIB_OSDIRNAMES='$(MULTILIB_OSDIRNAMES)' \
- ASM_HIDDEN_OP='$(ASM_HIDDEN_OP)' \
- GCC_FOR_TARGET='$(GCC_FOR_TARGET)' \
- mkinstalldirs='$(mkinstalldirs)' \
- $(SHELL) mklibgcc > tmp-libgcc.mk
- mv tmp-libgcc.mk libgcc.mk
-
-# All the things that might cause us to want to recompile bits of libgcc.
-LIBGCC_DEPS = $(GCC_PASSES) stmp-int-hdrs $(STMP_FIXPROTO) \
- libgcc.mk $(srcdir)/libgcc2.c $(srcdir)/libgcov.c $(TCONFIG_H) \
- $(MACHMODE_H) longlong.h gbl-ctors.h config.status $(srcdir)/libgcc2.h \
- tsystem.h $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \
- config/dfp-bit.h config/dfp-bit.c \
- $(LIB2ADD_ST) $(LIB2ADDEH) $(LIB2ADDEHDEP) $(EXTRA_PARTS) \
- $(srcdir)/config/$(LIB1ASMSRC) \
- $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h $(SFP_MACHINE)
-
-libgcov.a: libgcc.a; @true
-
-libgcc.a: $(LIBGCC_DEPS)
- $(MAKE) \
- CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- CONFIG_H="$(TCONFIG_H)" TM_H="$(TM_H)" \
- INCLUDES="$(INCLUDES)" \
- MAKEOVERRIDES= \
- -f libgcc.mk all
+ : > tmp-libgcc.mvars
+ echo LIB1ASMFUNCS = '$(LIB1ASMFUNCS)' >> tmp-libgcc.mvars
+ echo LIB1ASMSRC = '$(LIB1ASMSRC)' >> tmp-libgcc.mvars
+ echo LIB2FUNCS_ST = '$(LIB2FUNCS_ST)' >> tmp-libgcc.mvars
+ echo LIB2FUNCS_EXCLUDE = '$(LIB2FUNCS_EXCLUDE)' >> tmp-libgcc.mvars
+ echo LIBGCOV = '$(LIBGCOV)' >> tmp-libgcc.mvars
+ echo LIB2ADD = '$(call srcdirify,$(LIB2ADD))' >> tmp-libgcc.mvars
+ echo LIB2ADD_ST = '$(call srcdirify,$(LIB2ADD_ST))' >> tmp-libgcc.mvars
+ echo LIB2ADDEH = '$(call srcdirify,$(LIB2ADDEH))' >> tmp-libgcc.mvars
+ echo LIB2ADDEHSTATIC = '$(call srcdirify,$(LIB2ADDEHSTATIC))' >> tmp-libgcc.mvars
+ echo LIB2ADDEHSHARED = '$(call srcdirify,$(LIB2ADDEHSHARED))' >> tmp-libgcc.mvars
+ echo LIB2_SIDITI_CONV_FUNCS = '$(LIB2_SIDITI_CONV_FUNCS)' >> tmp-libgcc.mvars
+ echo LIBUNWIND = '$(call srcdirify,$(LIBUNWIND))' >> tmp-libgcc.mvars
+ echo SHLIBUNWIND_LINK = '$(SHLIBUNWIND_LINK)' >> tmp-libgcc.mvars
+ echo SHLIBUNWIND_INSTALL = '$(SHLIBUNWIND_INSTALL)' >> tmp-libgcc.mvars
+ echo FPBIT = '$(FPBIT)' >> tmp-libgcc.mvars
+ echo FPBIT_FUNCS = '$(FPBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo LIB2_DIVMOD_FUNCS = '$(LIB2_DIVMOD_FUNCS)' >> tmp-libgcc.mvars
+ echo DPBIT = '$(DPBIT)' >> tmp-libgcc.mvars
+ echo DPBIT_FUNCS = '$(DPBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo TPBIT = '$(TPBIT)' >> tmp-libgcc.mvars
+ echo TPBIT_FUNCS = '$(TPBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo DFP_ENABLE = '$(DFP_ENABLE)' >> tmp-libgcc.mvars
+ echo DFP_CFLAGS='$(DFP_CFLAGS)' >> tmp-libgcc.mvars
+ echo D32PBIT='$(D32PBIT)' >> tmp-libgcc.mvars
+ echo D32PBIT_FUNCS='$(D32PBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo D64PBIT='$(D64PBIT)' >> tmp-libgcc.mvars
+ echo D64PBIT_FUNCS='$(D64PBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo D128PBIT='$(D128PBIT)' >> tmp-libgcc.mvars
+ echo D128PBIT_FUNCS='$(D128PBIT_FUNCS)' >> tmp-libgcc.mvars
+ echo GCC_EXTRA_PARTS = '$(GCC_EXTRA_PARTS)' >> tmp-libgcc.mvars
+ echo SHLIB_LINK = '$(subst $(GCC_FOR_TARGET),$$(GCC_FOR_TARGET),$(SHLIB_LINK))' >> tmp-libgcc.mvars
+ echo SHLIB_INSTALL = '$(SHLIB_INSTALL)' >> tmp-libgcc.mvars
+ echo SHLIB_EXT = '$(SHLIB_EXT)' >> tmp-libgcc.mvars
+ echo SHLIB_MKMAP = '$(call srcdirify,$(SHLIB_MKMAP))' >> tmp-libgcc.mvars
+ echo SHLIB_MKMAP_OPTS = '$(SHLIB_MKMAP_OPTS)' >> tmp-libgcc.mvars
+ echo SHLIB_MAPFILES = '$(call srcdirify,$(SHLIB_MAPFILES))' >> tmp-libgcc.mvars
+ echo SHLIB_NM_FLAGS = '$(SHLIB_NM_FLAGS)' >> tmp-libgcc.mvars
+ echo LIBGCC2_CFLAGS = '$(LIBGCC2_CFLAGS)' >> tmp-libgcc.mvars
+ echo CRTSTUFF_CFLAGS = '$(CRTSTUFF_CFLAGS)' >> tmp-libgcc.mvars
+ echo CRTSTUFF_T_CFLAGS = '$(CRTSTUFF_T_CFLAGS)' >> tmp-libgcc.mvars
+ echo CRTSTUFF_T_CFLAGS_S = '$(CRTSTUFF_T_CFLAGS_S)' >> tmp-libgcc.mvars
+
+ mv tmp-libgcc.mvars libgcc.mvars
# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
$(SHELL) $(srcdir)/../move-if-change tmp-mlib.h multilib.h
$(STAMP) s-mlib
-# Build multiple copies of libgcc.a, one for each target switch.
-stmp-multilib: $(LIBGCC_DEPS)
- $(MAKE) \
- CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- CONFIG_H="$(CONFIG_H)" \
- MAKEOVERRIDES= \
- -f libgcc.mk all
- $(STAMP) stmp-multilib
-
# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
# constructors.
$(VARRAY_H) $(HASHTAB_H) $(SPLAY_TREE_H) toplev.h \
langhooks.h $(TREE_INLINE_H) $(CGRAPH_H) intl.h $(FUNCTION_H) $(TREE_GIMPLE_H) \
debug.h $(DIAGNOSTIC_H) $(TREE_FLOW_H) tree-iterator.h tree-mudflap.h \
- ipa-prop.h
+ ipa-prop.h value-prof.h
print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(GGC_H) langhooks.h $(REAL_H) tree-iterator.h
stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
tree-ssa-structalias.o: tree-ssa-structalias.c tree-ssa-structalias.h \
$(SYSTEM_H) $(CONFIG_H) $(GGC_H) $(TREE_H) $(TREE_FLOW_H) \
$(TM_H) coretypes.h $(CGRAPH_H) tree-pass.h $(TIMEVAR_H) \
- gt-tree-ssa-structalias.h $(PARAMS_H)
+ gt-tree-ssa-structalias.h $(PARAMS_H) $(ALIAS_H) pointer-set.h
tree-ssa.o : tree-ssa.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) output.h $(DIAGNOSTIC_H) \
toplev.h $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
langhooks.h domwalk.h tree-pass.h $(GGC_H) $(PARAMS_H) $(BASIC_BLOCK_H) \
bitmap.h $(CFGLOOP_H) $(FLAGS_H) hard-reg-set.h $(HASHTAB_H) \
$(TREE_GIMPLE_H) $(TREE_INLINE_H) $(VARRAY_H) vecprim.h
+tree-ssa-ter.o : tree-ssa-ter.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
+ $(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
+ $(TREE_SSA_LIVE_H) bitmap.h
+tree-ssa-coalesce.o : tree-ssa-coalesce.c $(TREE_FLOW_H) $(CONFIG_H) \
+ $(SYSTEM_H) $(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
+ $(TREE_SSA_LIVE_H) bitmap.h $(FLAGS_H) $(HASHTAB_H) toplev.h
tree-outof-ssa.o : tree-outof-ssa.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
- $(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) output.h $(DIAGNOSTIC_H) \
- $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
- langhooks.h tree-pass.h $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) bitmap.h \
- $(FLAGS_H) $(GGC_H) hard-reg-set.h $(HASHTAB_H) $(TREE_GIMPLE_H) \
- $(TREE_INLINE_H) $(VARRAY_H) toplev.h vecprim.h
+ $(TREE_H) $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
+ tree-pass.h $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) bitmap.h $(GGC_H) toplev.h
tree-ssa-dse.o : tree-ssa-dse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(GGC_H) $(TREE_H) $(RTL_H) $(TM_P_H) $(BASIC_BLOCK_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) domwalk.h $(FLAGS_H) \
domwalk.o : domwalk.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(BASIC_BLOCK_H) $(TREE_FLOW_H) domwalk.h $(GGC_H)
tree-ssa-live.o : tree-ssa-live.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
- $(TREE_H) $(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) \
- $(TM_H) coretypes.h $(TREE_DUMP_H) $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) \
- bitmap.h $(FLAGS_H) $(HASHTAB_H) $(TREE_GIMPLE_H) $(TREE_INLINE_H) \
- $(VARRAY_H) toplev.h vecprim.h
+ $(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
+ $(TREE_SSA_LIVE_H) bitmap.h toplev.h
tree-ssa-copyrename.o : tree-ssa-copyrename.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) tree-pass.h \
$(TM_H) coretypes.h $(TREE_DUMP_H) $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) \
tree-vrp.o : tree-vrp.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) $(DIAGNOSTIC_H) $(GGC_H) \
$(BASIC_BLOCK_H) tree-ssa-propagate.h $(FLAGS_H) $(TREE_DUMP_H) \
- $(CFGLOOP_H) $(SCEV_H) tree-chrec.h $(TIMEVAR_H)
+ $(CFGLOOP_H) $(SCEV_H) tree-chrec.h $(TIMEVAR_H) toplev.h
tree-cfg.o : tree-cfg.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) $(FLAGS_H) output.h \
$(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(FLAGS_H) $(TREE_INLINE_H) $(RECOG_H) insn-config.h $(EXPR_H) \
- gt-tree-ssa-address.h $(GGC_H)
+ gt-tree-ssa-address.h $(GGC_H) tree-affine.h
tree-ssa-loop-niter.o : tree-ssa-loop-niter.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) $(PARAMS_H) \
$(TREE_INLINE_H) output.h $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(GGC_H) $(RECOG_H) insn-config.h $(HASHTAB_H) $(SCEV_H) \
$(CFGLOOP_H) $(PARAMS_H) langhooks.h $(BASIC_BLOCK_H) hard-reg-set.h \
- tree-chrec.h $(VARRAY_H)
+ tree-chrec.h $(VARRAY_H) tree-affine.h
+tree-affine.o : tree-affine.c tree-affine.h $(CONFIG_H) \
+ $(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) \
+ output.h $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H)
tree-ssa-loop-manip.o : tree-ssa-loop-manip.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
$(FUNCTION_H) $(TIMEVAR_H) convert.h $(TM_H) coretypes.h langhooks.h \
$(TREE_DUMP_H) tree-pass.h $(PARAMS_H) $(BASIC_BLOCK_H) $(DIAGNOSTIC_H) \
hard-reg-set.h $(TREE_GIMPLE_H) vec.h tree-ssa-structalias.h \
- $(IPA_TYPE_ESCAPE_H) vecprim.h
+ $(IPA_TYPE_ESCAPE_H) vecprim.h pointer-set.h
tree-ssa-reassoc.o : tree-ssa-reassoc.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(GGC_H) $(DIAGNOSTIC_H) errors.h $(TIMEVAR_H) \
$(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H) tree-iterator.h\
$(GGC_H) gt-tree-mudflap.h tree-pass.h toplev.h
tree-pretty-print.o : tree-pretty-print.c $(CONFIG_H) $(SYSTEM_H) \
$(TREE_H) $(DIAGNOSTIC_H) $(REAL_H) $(HASHTAB_H) $(TREE_FLOW_H) \
- $(TM_H) coretypes.h tree-iterator.h tree-chrec.h langhooks.h tree-pass.h
+ $(TM_H) coretypes.h tree-iterator.h tree-chrec.h langhooks.h tree-pass.h \
+ value-prof.h
fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(FLAGS_H) $(REAL_H) toplev.h $(HASHTAB_H) $(EXPR_H) $(RTL_H) \
$(GGC_H) $(TM_P_H) langhooks.h $(MD5_H)
$(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \
langhooks.h insn-flags.h $(CFGLAYOUT_H) $(REAL_H) $(CFGLOOP_H) \
hosthooks.h $(CGRAPH_H) $(COVERAGE_H) tree-pass.h $(TREE_DUMP_H) \
- $(GGC_H) $(INTEGRATE_H) $(CPPLIB_H) opts.h $(TREE_FLOW_H) $(TREE_INLINE_H)
+ $(GGC_H) $(INTEGRATE_H) $(CPPLIB_H) opts.h $(TREE_FLOW_H) $(TREE_INLINE_H) \
+ gt-passes.h
main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h
$(CGRAPH_H) except.h sbitmap.h
expmed.o : expmed.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
$(FLAGS_H) insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) $(REAL_H) \
- toplev.h $(TM_P_H) langhooks.h
+ toplev.h $(TM_P_H) langhooks.h $(TARGET_H)
explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
$(FLAGS_H) hard-reg-set.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) \
toplev.h $(FUNCTION_H) $(GGC_H) $(TM_P_H) langhooks.h gt-explow.h \
cgraph.o : cgraph.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
langhooks.h toplev.h $(FLAGS_H) $(GGC_H) $(TARGET_H) $(CGRAPH_H) \
gt-cgraph.h output.h intl.h $(BASIC_BLOCK_H) debug.h $(HASHTAB_H) \
- $(TREE_INLINE_H) $(VARRAY_H) $(TREE_DUMP_H)
+ $(TREE_INLINE_H) $(VARRAY_H) $(TREE_DUMP_H) $(TREE_FLOW_H)
cgraphunit.o : cgraphunit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) langhooks.h $(TREE_INLINE_H) toplev.h $(FLAGS_H) $(GGC_H) \
$(TARGET_H) $(CGRAPH_H) intl.h pointer-set.h $(FUNCTION_H) $(TREE_GIMPLE_H) \
$(TREE_FLOW_H) tree-pass.h $(C_COMMON_H) debug.h $(DIAGNOSTIC_H) \
+ $(FIBHEAP_H) output.h $(PARAMS_H) $(RTL_H) $(TIMEVAR_H) ipa-prop.h
+cgraphbuild.o : cgraphbuild.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(TREE_H) langhooks.h $(CGRAPH_H) intl.h pointer-set.h $(TREE_GIMPLE_H) \
+ $(TREE_FLOW_H) tree-pass.h
+varpool.o : varpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(TREE_H) langhooks.h $(TREE_INLINE_H) toplev.h $(FLAGS_H) $(GGC_H) \
+ $(TARGET_H) $(CGRAPH_H) intl.h pointer-set.h $(FUNCTION_H) $(TREE_GIMPLE_H) \
+ $(TREE_FLOW_H) tree-pass.h $(C_COMMON_H) debug.h $(DIAGNOSTIC_H) \
$(FIBHEAP_H) output.h $(PARAMS_H) $(RTL_H) $(TIMEVAR_H) ipa-prop.h \
- gt-cgraphunit.h
+ gt-varpool.h
ipa.o : ipa.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(CGRAPH_H)
ipa-prop.o : ipa-prop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
langhooks.h $(GGC_H) $(TARGET_H) $(CGRAPH_H) ipa-prop.h \
$(RTL_H) $(TREE_H) hard-reg-set.h insn-config.h reload.h $(FLAGS_H) \
$(BASIC_BLOCK_H) output.h sbitmap.h alloc-pool.h $(FIBHEAP_H) $(HASHTAB_H) \
$(REGS_H) $(EXPR_H) $(TIMEVAR_H) tree-pass.h
-conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(OBSTACK_H) \
- $(HASHTAB_H) $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
profile.o : profile.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TREE_H) $(FLAGS_H) output.h $(REGS_H) $(EXPR_H) $(FUNCTION_H) \
toplev.h $(COVERAGE_H) $(TREE_FLOW_H) value-prof.h cfghooks.h \
cfgexpand.o : cfgexpand.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) \
coretypes.h $(TREE_DUMP_H) except.h langhooks.h tree-pass.h $(RTL_H) \
- $(DIAGNOSTIC_H) toplev.h $(BASIC_BLOCK_H) $(FLAGS_H) debug.h $(PARAMS_H)
+ $(DIAGNOSTIC_H) toplev.h $(BASIC_BLOCK_H) $(FLAGS_H) debug.h $(PARAMS_H) \
+ value-prof.h
cfgrtl.o : cfgrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FLAGS_H) insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h \
output.h toplev.h $(FUNCTION_H) except.h $(TM_P_H) insn-config.h $(EXPR_H) \
$(TIMEVAR_H) vecprim.h
varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GGC_H) \
$(HASHTAB_H) $(BCONFIG_H) $(VARRAY_H) toplev.h
-vec.o : vec.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) coretypes.h vec.h $(GGC_H) \
+vec.o : vec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h vec.h $(GGC_H) \
toplev.h
reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FLAGS_H) output.h $(EXPR_H) $(OPTABS_H) reload.h $(RECOG_H) \
insn-config.h $(INSN_ATTR_H) $(FUNCTION_H) output.h hard-reg-set.h \
except.h debug.h xcoffout.h toplev.h reload.h dwarf2out.h tree-pass.h \
$(BASIC_BLOCK_H) $(TM_P_H) $(TARGET_H) $(EXPR_H) $(CFGLAYOUT_H) dbxout.h \
- $(TIMEVAR_H) $(CGRAPH_H) $(COVERAGE_H) $(REAL_H)
+ $(TIMEVAR_H) $(CGRAPH_H) $(COVERAGE_H) $(REAL_H) vecprim.h
recog.o : recog.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FUNCTION_H) $(BASIC_BLOCK_H) $(REGS_H) $(RECOG_H) $(EXPR_H) \
$(FLAGS_H) insn-config.h $(INSN_ATTR_H) toplev.h output.h reload.h \
$(srcdir)/function.c $(srcdir)/except.h \
$(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \
$(srcdir)/profile.c $(srcdir)/regclass.c \
- $(srcdir)/reg-stack.c $(srcdir)/cfglayout.c \
+ $(srcdir)/reg-stack.c $(srcdir)/cfglayout.c $(srcdir)/cfglayout.h \
$(srcdir)/sdbout.c $(srcdir)/stor-layout.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(srcdir)/tree-mudflap.c $(srcdir)/tree-flow.h \
$(srcdir)/tree-profile.c $(srcdir)/tree-nested.c \
$(srcdir)/ipa-reference.c $(srcdir)/tree-ssa-structalias.h \
$(srcdir)/tree-ssa-structalias.c \
- $(srcdir)/c-pragma.h $(srcdir)/omp-low.c \
- $(srcdir)/targhooks.c $(srcdir)/cgraphunit.c $(out_file) \
+ $(srcdir)/c-pragma.h $(srcdir)/omp-low.c $(srcdir)/varpool.c \
+ $(srcdir)/targhooks.c $(out_file) $(srcdir)/passes.c\
@all_gtfiles@
GTFILES_FILES_LANGS = @all_gtfiles_files_langs@
gt-tree-profile.h gt-tree-ssa-address.h \
gt-tree-iterator.h gt-gimplify.h \
gt-tree-phinodes.h gt-tree-nested.h \
-gt-tree-ssa-propagate.h \
-gt-tree-ssa-structalias.h gt-ipa-inline.h gt-cgraphunit.h \
+gt-tree-ssa-propagate.h gt-varpool.h \
+gt-tree-ssa-structalias.h gt-ipa-inline.h gt-passes.h \
gt-stringpool.h gt-targhooks.h gt-omp-low.h : s-gtype ; @true
define echo_quoted_to_gtyp
$(GTM_H) $(RTL_BASE_H) $(OBSTACK_H) $(HASHTAB_H) gensupport.h
build/rtl.o: rtl.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) \
$(RTL_H) $(REAL_H) $(GGC_H) errors.h
-build/vec.o : vec.c $(BCONFIG_H) $(SYSTEM_H) $(TREE_H) coretypes.h vec.h \
+build/vec.o : vec.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h vec.h \
$(GGC_H) toplev.h
build/gencondmd.o : build/gencondmd.c $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) insn-constants.h $(RTL_H) $(TM_P_H) \
-$(TEXI2POD) $< > $@
#\f
-# clean-target removes all files made by compilation.
-# This can be added to over time.
-
-clean-target: clean-target-libgcc
-
-clean-target-libgcc:
- test ! -d libgcc || \
- (cd libgcc && find . -type d -print) | \
- while read d; do rm -f $$d/libgcc.a || : ; done
- test ! -d libgcc || rm -r libgcc
- test ! -f stmp-dirs || rm stmp-dirs
-
# Deletion of files made during compilation.
# There are four levels of this:
# `mostlyclean', `clean', `distclean' and `maintainer-clean'.
# (less duplicated code).
mostlyclean: lang.mostlyclean
- -rm -f $(STAGECOPYSTUFF) $(STAGEMOVESTUFF)
+ -rm -f $(MOSTLYCLEANFILES)
-rm -f *$(coverageexts)
- -rm -rf libgcc
# Delete build programs
-rm -f build/*
-rm -f mddeps.mk
-rm -f config.h tconfig.h bconfig.h tm_p.h tm.h
-rm -f options.c options.h optionlist
-rm -f cs-*
- -rm -rf libgcc
-rm -f doc/*.dvi
-rm -f doc/*.pdf
# Delete the include directory.
else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
fi ; fi
- -rm -fr stage1 stage2 stage3 stage4 stageprofile stagefeedback
-# Delete stamps of bootstrap stages
- -rm -f stage?_*
- -rm -f clean?_*
- -rm -f stage_last
# Delete all files that users would normally create
# while building and installing GCC.
-rm -f Make-lang Make-hooks Make-host Make-target
-rm -f Makefile *.oaux
-rm -f gthr-default.h
- -rm -f */stage1 */stage2 */stage3 */stage4 */include */stageprofile */stagefeedback
-rm -f TAGS */TAGS
-rm -f *.asm
-rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
-cd testsuite && rm -f *.out *.gcov *$(coverageexts)
-rm -rf ${QMTEST_DIR} stamp-qmtest
-rm -f cxxmain.c
- -rm -f mklibgcc gccbug .gdbinit configargs.h
+ -rm -f gccbug .gdbinit configargs.h
-rm -f gcov.pod
# Delete po/*.gmo only if we are not building in the source directory.
-if [ ! -f po/exgettext ]; then rm -f po/*.gmo; fi
# Copy the compiler files into directories where they will be run.
# Install the driver last so that the window when things are
# broken is small.
-install: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
+install: install-common $(INSTALL_HEADERS) \
install-cpp install-man install-info install-@POSUB@ \
install-driver
$(mkinstalldirs) $(DESTDIR)$(man7dir)
# Install the compiler executables built during cross compilation.
-install-common: native $(EXTRA_PARTS) lang.install-common installdirs
+install-common: native lang.install-common installdirs
for file in $(COMPILERS); do \
if [ -f $$file ] ; then \
rm -f $(DESTDIR)$(libexecsubdir)/$$file; \
$(INSTALL_PROGRAM) $$file $(DESTDIR)$(libexecsubdir)/$$file; \
else true; fi; \
done
- for file in $(EXTRA_PARTS) ..; do \
- if [ x"$$file" != x.. ]; then \
- rm -f $(DESTDIR)$(libsubdir)/$$file; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(libsubdir)/$$file; \
- chmod a-x $(DESTDIR)$(libsubdir)/$$file; \
- else true; fi; \
- done
# We no longer install the specs file because its presence makes the
# driver slower, and because people who need it can recreate it by
# using -dumpspecs. We remove any old version because it would
-$(INSTALL_DATA) $< $@
-chmod a-x $@
-# Install the library.
-install-libgcc: libgcc.mk libgcc.a libgcov.a installdirs
- $(MAKE) \
- CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- CONFIG_H="$(TCONFIG_H)" \
- MAKEOVERRIDES= \
- mkinstalldirs='$(mkinstalldirs)' \
- -f libgcc.mk install
-
-# Install multiple versions of libgcc.a, libgcov.a.
-install-multilib: stmp-multilib installdirs
- $(MAKE) \
- CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- CONFIG_H="$(CONFIG_H)" \
- MAKEOVERRIDES= \
- mkinstalldirs='$(mkinstalldirs)' \
- -f libgcc.mk install
-
# Install all the header files built in the include subdirectory.
install-headers: $(INSTALL_HEADERS_DIR)
# Fix symlinks to absolute paths in the installed include directory to
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
export TCL_LIBRARY ; fi ; \
+ GCC_EXEC_PREFIX="$(libdir)/gcc/" ; export GCC_EXEC_PREFIX ; \
$(RUNTEST) --tool $* $(RUNTESTFLAGS))
check-consistency: testsuite/site.exp
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
export TCL_LIBRARY ; fi ; \
+ GCC_EXEC_PREFIX="$(libdir)/gcc/" ; export GCC_EXEC_PREFIX ; \
$(RUNTEST) --tool consistency $(RUNTESTFLAGS)
# QMTest targets
etags -o TAGS.sub *.y *.h *.c; \
etags --include TAGS.sub $$incs)
-# ------------------------------------------------------
-# Bootstrap-related targets (not used during 'make all')
-# ------------------------------------------------------
-
-# A list of files to be destroyed during "lean" builds.
-VOL_FILES=`echo $(BACKEND) $(OBJS) $(C_OBJS) *.c *.h gen*`
-
-# Flags to pass to stage2 and later recursive makes. Note that the
-# WARN_CFLAGS setting can't be to the expansion of GCC_WARN_CFLAGS in
-# the context of the stage_x rule.
-
-POSTSTAGE1_FLAGS_TO_PASS = \
- ADAFLAGS="$(BOOT_ADAFLAGS)" \
- CFLAGS="$(BOOT_CFLAGS)" \
- LDFLAGS="$(BOOT_LDFLAGS)" \
- WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
- STRICT_WARN="$(STRICT2_WARN)" \
- libdir=$(libdir) \
- LANGUAGES="$(LANGUAGES)" \
- MAKEINFO="$(MAKEINFO)" \
- MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
- MAKEOVERRIDES= \
- OUTPUT_OPTION="-o \$$@"
-
-STAGE2_FLAGS_TO_PASS = \
- CFLAGS="$(BOOT_CFLAGS)" \
- WERROR="$(WERROR_FLAGS)" \
-
-STAGEPROFILE_FLAGS_TO_PASS = \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
-
-# Files never linked into the final executable produces warnings about missing
-# profile.
-STAGEFEEDBACK_FLAGS_TO_PASS = \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-use -freorder-blocks-and-partition"
-
-# Only build the C compiler for stage1, because that is the only one that
-# we can guarantee will build with the native compiler, and also it is the
-# only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
-# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
-# overrideable (for a bootstrap build stage1 also builds gcc.info).
-# The stage1 compiler is always built with checking enabled.
-stage1_build:
- $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" \
- CFLAGS="$(STAGE1_CFLAGS) $(STAGE1_CHECKING)" \
- MAKEINFO="$(MAKEINFO)" MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
- COVERAGE_FLAGS= OBJS-onestep="$(OBJS)"
- $(STAMP) stage1_build
- echo stage1_build > stage_last
-
-stage1_copy: stage1_build
- $(MAKE) stage1
- $(STAMP) stage1_copy
- echo stage2_build > stage_last
-
-stage2_build: stage1_copy
- $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=stage1/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- $(STAGE2_FLAGS_TO_PASS)
- $(STAMP) stage2_build
- echo stage2_build > stage_last
-
-stage2_copy: stage2_build
- $(MAKE) stage2
- $(STAMP) stage2_copy
- echo stage3_build > stage_last
-
-stageprofile_build: stage1_copy
- $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=stage1/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- $(STAGEPROFILE_FLAGS_TO_PASS)
- $(STAMP) stageprofile_build
- echo stageprofile_build > stage_last
-
-stageprofile_copy: stageprofile_build
- $(MAKE) stageprofile
- $(STAMP) stageprofile_copy
- echo stagefeedback_build > stage_last
-
-stage3_build: stage2_copy
- $(MAKE) CC="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=stage2/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- $(STAGE2_FLAGS_TO_PASS)
- $(STAMP) stage3_build
- echo stage3_build > stage_last
-
-stagefeedback_build: stageprofile_copy stage1_copy
- $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=stage1/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- $(STAGEFEEDBACK_FLAGS_TO_PASS)
- $(STAMP) stagefeedback_build
- echo stagefeedback_build > stage_last
-
-stagefeedback_copy: stagefeedback_build
- $(MAKE) stagefeedback
- $(STAMP) stagefeedback_copy
- echo stagefeedback2_build > stage_last
-
-# For bootstrap4:
-stage3_copy: stage3_build
- $(MAKE) stage3
- $(STAMP) stage3_copy
- echo stage4_build > stage_last
-
-stage4_build: stage3_copy
- $(MAKE) CC="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=stage3/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- $(STAGE2_FLAGS_TO_PASS)
- $(STAMP) stage4_build
- echo stage4_build > stage_last
-
-# Additional steps for *-lean targets:
-clean_s1: stage1_copy
- -(cd stage1 && rm -f $(VOL_FILES))
- $(STAMP) clean_s1
-
-clean_s2: stage2_copy
- -rm -rf stage1
- $(STAMP) clean_s2
-
-# The various entry points for bootstrapping.
-
-bootstrap: stage3_build
- @echo
- @echo Bootstrap complete - make \"quickstrap\" to redo last build,
- @echo \"restage1\" through \"restage3\" to rebuild specific stages,
- @echo \"restrap\" to redo the bootstrap from stage1, or
- @echo \"cleanstrap\" to redo the bootstrap from scratch.
-
-bootstrap-lean : clean_s1 clean_s2 stage3_build
- @echo
- @echo Bootstrap complete - make \"quickstrap\" to redo last build,
- @echo or \"cleanstrap\" to redo the bootstrap from scratch.
-
-bootstrap2: bootstrap
-
-bootstrap2-lean : bootstrap-lean
-
-bootstrap3 bootstrap3-lean: bootstrap
-
-bootstrap4 bootstrap4-lean: stage4_build
-
-unstage1 unstage2 unstage3 unstage4 unstageprofile unstagefeedback:
- -set -vx; stage=`echo $@ | sed -e 's/un//'`; \
- rm -f $$stage/as$(exeext); \
- rm -f $$stage/nm$(exeext); \
- rm -f $$stage/collect-ld$(exeext); \
- if test -d $$stage; then \
- mv $$stage/specs $(SPECS) 2>/dev/null || :; \
- mv $$stage/* . 2>/dev/null; \
- for i in `cd $$stage; echo *` ; do \
- if test -d $$stage/$$i; then \
- mv $$stage/$$i/* $$i/. 2>/dev/null; \
- else \
- mv $$stage/$$i .; \
- fi; \
- done \
- fi ; \
- rm -f $${stage}_build $${stage}_copy ;\
- echo $${stage}_build > stage_last
-
-restage1: unstage1
- $(MAKE) $(REMAKEFLAGS) stage1_build
-
-restage2: unstage2
- $(MAKE) $(REMAKEFLAGS) stage2_build
-
-restage3: unstage3
- $(MAKE) $(REMAKEFLAGS) stage3_build
-
-restage4: unstage4
- $(MAKE) $(REMAKEFLAGS) stage4_build
-
-restageprofile: unstageprofile
- $(MAKE) $(REMAKEFLAGS) stageprofile_build
-
-restagefeedback: unstagefeedback
- $(MAKE) $(REMAKEFLAGS) stagefeedback_build
-
-# Bubble up a bugfix through all the stages. Primarily useful for fixing
-# bugs that cause the compiler to crash while building stage 2.
-bubblestrap:
- if test -f stage_last; then \
- LAST=`sed -e 's/_build//' < stage_last`; \
- if test "$$LAST" != "stage1"; then \
- $(MAKE) $(REMAKEFLAGS) $$LAST; \
- $(STAMP) $${LAST}_copy; \
- fi; \
- fi
- if test -f stage1_copy; then $(MAKE) unstage1; fi
- $(MAKE) $(REMAKEFLAGS) stage1_copy
- if test -f stage2_copy; then $(MAKE) unstage2; fi
- $(MAKE) $(REMAKEFLAGS) stage2_copy
- if test -f stage3_copy; then $(MAKE) unstage3; fi
- $(MAKE) $(REMAKEFLAGS) stage3_build
- if test -f stage4_copy; then \
- $(MAKE) $(REMAKEFLAGS) stage3_copy; $(MAKE) unstage4; \
- $(MAKE) $(REMAKEFLAGS) stage4_build || exit 1; \
- fi
-
-BOOTSTRAPPING := $(shell if test -f ../stage_last; then echo yes; else echo no; fi)
-ifeq ($(BOOTSTRAPPING),yes)
-# Provide quickstrap as a target that people can type into the gcc directory,
-# and that fails if you're not into it.
-quickstrap: all
-else
-quickstrap:
- if test -f stage_last ; then \
- LAST=`cat stage_last`; rm $$LAST; $(MAKE) $(REMAKEFLAGS) $$LAST; \
- else \
- $(MAKE) $(REMAKEFLAGS) stage1_build; \
- fi
-endif
-
-cleanstrap:
- -$(MAKE) clean
- $(MAKE) $(REMAKEFLAGS) bootstrap
-
-unstrap:
- -rm -rf stage[234]*
- $(MAKE) unstage1
- -rm -f stage_last
-
-# Differs from cleanstrap in that it starts from the earlier stage1 build,
-# not from scratch.
-restrap:
- $(MAKE) unstrap
- $(MAKE) $(REMAKEFLAGS) bootstrap
-
-# These targets compare the object files in the current directory with
-# those in a stage directory. We need to skip the first N bytes of
-# each object file. The "slow" mechanism assumes nothing special
-# about cmp and uses the tail command to skip. ./ avoids a bug in
-# some versions of tail. The "gnu" targets use gnu cmp (diffutils
-# v2.4 or later), to avoid running tail and the overhead of twice
-# copying each object file. Likewise, the "fast" targets use the skip
-# parameter of cmp available on some systems to accomplish the same
-# thing. An exit status of 1 is precisely the result we're looking
-# for (other values mean other problems).
-slowcompare slowcompare3 slowcompare4 slowcompare-lean slowcompare3-lean slowcompare4-lean \
-fastcompare fastcompare3 fastcompare4 fastcompare-lean fastcompare3-lean fastcompare4-lean \
- gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
- -rm -f .bad_compare
- case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
- for dir in . $(SUBDIRS) libgcc; do \
- if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
- for file in $$dir/*$(objext); do \
- case "$@" in \
- slowcompare* ) \
- if tail -c +1 </dev/null >/dev/null 2>&1; then \
- skip16='-c +17'; \
- else \
- skip16='+17c'; \
- fi; \
- tail $$skip16 ./$$file > tmp-foo1; \
- tail $$skip16 stage$$stage/$$file > tmp-foo2; \
- cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1; \
- cmpret=$$?; \
- ;; \
- fastcompare* ) \
- cmp $$file stage$$stage/$$file 16 16 > /dev/null 2>&1; \
- cmpret=$$?; \
- ;; \
- gnucompare* ) \
- cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1; \
- cmpret=$$?; \
- ;; \
- esac ; \
- if test $$cmpret -eq 1; then \
- case $$file in \
- ./cc*-checksum$(objext) | libgcc/* ) \
- echo warning: $$file differs;; \
- *) \
- echo $$file differs >> .bad_compare;; \
- esac ; \
- fi; \
- done; \
- else true; fi; \
- done
- -rm -f tmp-foo*
- case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
- if [ -f .bad_compare ]; then \
- echo "Bootstrap comparison failure!"; \
- cat .bad_compare; \
- exit 1; \
- else \
- case "$@" in \
- *-lean ) rm -rf stage$$stage ;; \
- *) ;; \
- esac; true; \
- fi
-
-# Forwarding wrappers to the most appropriate version.
-compare: @make_compare_target@
-compare3: @make_compare_target@3
-compare4: @make_compare_target@4
-compare-lean: @make_compare_target@-lean
-compare3-lean: @make_compare_target@3-lean
-compare4-lean: @make_compare_target@4-lean
-
-# Copy the object files from a particular stage into a subdirectory.
-stage1-start:
- -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage1
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
- done
- -rm -f stage1/libgcc.a stage1/libgcc_eh.a stage1/libgcov.a
- -rm -f stage1/libgcc_s*$(SHLIB_EXT)
- -rm -f stage1/libunwind.a stage1/libunwind*$(SHLIB_EXT)
-# If SPECS is overridden, make sure it is `installed' as specs.
- -mv $(SPECS) stage1/specs
- -mv $(STAGEMOVESTUFF) stage1
- -mv build/* stage1/build
- -cp -p $(STAGECOPYSTUFF) stage1
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stage1 && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -cp libgcc.a stage1
- -$(RANLIB_FOR_TARGET) stage1/libgcc.a
- -cp libgcov.a stage1
- -$(RANLIB_FOR_TARGET) stage1/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage1; \
- $(RANLIB_FOR_TARGET) stage1/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stage1
- -cp libunwind.a libunwind*$(SHLIB_EXT) stage1
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stage1/$${f} . ; \
- else true; \
- fi; done
-stage1: force stage1-start lang.stage1
- -for dir in . $(SUBDIRS) ; \
- do \
- rm -f $$dir/*$(coverageexts) ; \
- done
-
-stage2-start:
- -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage2
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
- done
- -rm -f stage2/libgcc.a stage2/libgcov.a stage2/libgcc_eh.a
- -rm -f stage2/libgcc_s*$(SHLIB_EXT)
- -rm -f stage2/libunwind.a stage2/libunwind*$(SHLIB_EXT)
-# If SPECS is overridden, make sure it is `installed' as specs.
- -mv $(SPECS) stage2/specs
- -mv $(STAGEMOVESTUFF) stage2
- -mv build/* stage2/build
- -cp -p $(STAGECOPYSTUFF) stage2
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stage2 && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -cp libgcc.a stage2
- -$(RANLIB_FOR_TARGET) stage2/libgcc.a
- -cp libgcov.a stage2
- -$(RANLIB_FOR_TARGET) stage2/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage2; \
- $(RANLIB_FOR_TARGET) stage2/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stage2
- -cp libunwind.a libunwind*$(SHLIB_EXT) stage2
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stage2/$${f} . ; \
- else true; \
- fi; done
-stage2: force stage2-start lang.stage2
-
-stage3-start:
- -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage3
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
- done
- -rm -f stage3/libgcc.a stage3/libgcov.a stage3/libgcc_eh.a
- -rm -f stage3/libgcc_s*$(SHLIB_EXT)
- -rm -f stage3/libunwind.a stage3/libunwind*$(SHLIB_EXT)
-# If SPECS is overridden, make sure it is `installed' as specs.
- -mv $(SPECS) stage3/specs
- -mv $(STAGEMOVESTUFF) stage3
- -mv build/* stage3/build
- -cp -p $(STAGECOPYSTUFF) stage3
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stage3 && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -cp libgcc.a stage3
- -$(RANLIB_FOR_TARGET) stage3/libgcc.a
- -cp libgcov.a stage3
- -$(RANLIB_FOR_TARGET) stage3/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage3; \
- $(RANLIB_FOR_TARGET) stage3/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stage3
- -cp libunwind.a libunwind*$(SHLIB_EXT) stage3
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stage3/$${f} . ; \
- else true; \
- fi; done
-stage3: force stage3-start lang.stage3
-
-stage4-start:
- -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage4
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
- done
- -rm -f stage4/libgcc.a stage4/libgcov.a stage4/libgcc_eh.a
- -rm -f stage4/libgcc_s*$(SHLIB_EXT)
- -rm -f stage4/libunwind.a stage4/libunwind*$(SHLIB_EXT)
-# If SPECS is overridden, make sure it is `installed' as specs.
- -mv $(SPECS) stage4/specs
- -mv $(STAGEMOVESTUFF) stage4
- -mv build/* stage4/build
- -cp -p $(STAGECOPYSTUFF) stage4
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stage4 && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -cp libgcc.a stage4
- -$(RANLIB_FOR_TARGET) stage4/libgcc.a
- -cp libgcov.a stage4
- -$(RANLIB_FOR_TARGET) stage4/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage4; \
- $(RANLIB_FOR_TARGET) stage4/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stage4
- -cp libunwind.a libunwind*$(SHLIB_EXT) stage4
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stage4/$${f} . ; \
- else true; \
- fi; done
-stage4: force stage4-start lang.stage4
-
-stageprofile-start:
- -if [ -d stageprofile ] ; then true ; else mkdir stageprofile ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stageprofile
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stageprofile/$$dir ] ; then true ; else mkdir stageprofile/$$dir ; fi ; \
- done
- -rm -f stageprofile/libgcc.a stageprofile/libgcov.a stageprofile/libgcc_eh.a
- -rm -f stageprofile/libgcc_s*$(SHLIB_EXT)
- -rm -f stageprofile/libunwind.a stageprofile/libunwind*$(SHLIB_EXT)
- -mv $(STAGEMOVESTUFF) stageprofile
- -mv build/* stageprofile/build
- -cp -p $(STAGECOPYSTUFF) stageprofile
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stageprofile && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -cp libgcc.a stageprofile
- -$(RANLIB_FOR_TARGET) stageprofile/libgcc.a
- -cp libgcov.a stageprofile
- -$(RANLIB_FOR_TARGET) stageprofile/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stageprofile; \
- $(RANLIB_FOR_TARGET) stageprofile/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stageprofile
- -cp libunwind.a libunwind*$(SHLIB_EXT) stageprofile
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stageprofile/$${f} . ; \
- else true; \
- fi; done
-stageprofile: force stageprofile-start lang.stageprofile
-
-stagefeedback-start:
- -if [ -d stagefeedback ] ; then true ; else mkdir stagefeedback ; fi
- $(MAKE) -f libgcc.mk libgcc-stage-start stage=stagefeedback
- -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
- do \
- if [ -d stagefeedback/$$dir ] ; then true ; else mkdir stagefeedback/$$dir ; fi ; \
- done
- -rm -f stagefeedback/libgcc.a stagefeedback/libgcov.a stagefeedback/libgcc_eh.a
- -rm -f stagefeedback/libgcc_s*$(SHLIB_EXT)
- -rm -f stagefeedback/libunwind.a stagefeedback/libunwind*$(SHLIB_EXT)
- -rm -f *.da
- -mv $(STAGEMOVESTUFF) stagefeedback
- -mv build/* stagefeedback/build
- -cp -p $(STAGECOPYSTUFF) stagefeedback
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../as$(exeext) .) ; else true ; fi
- -if [ -f ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../ld$(exeext) .) ; else true ; fi
- -if [ -f collect-ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -for dir in fixinc po testsuite $(SUBDIRS); \
- do \
- rm -f $$dir/*.da ; \
- done
- -cp libgcc.a stagefeedback
- -$(RANLIB_FOR_TARGET) stagefeedback/libgcc.a
- -cp libgcov.a stagefeedback
- -$(RANLIB_FOR_TARGET) stagefeedback/libgcov.a
- -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stagefeedback; \
- $(RANLIB_FOR_TARGET) stagefeedback/libgcc_eh.a; \
- fi
- -cp libgcc_s*$(SHLIB_EXT) stagefeedback
- -cp libunwind.a libunwind*$(SHLIB_EXT) stagefeedback
- -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- cp stagefeedback/$${f} . ; \
- else true; \
- fi; done
-stagefeedback: force stagefeedback-start lang.stagefeedback
-
-# Copy just the executable files from a particular stage into a subdirectory,
-# and delete the object files. Use this if you're just verifying a version
-# that is pretty sure to work, and you are short of disk space.
-risky-stage1: stage1
- -$(MAKE) clean
-
-risky-stage2: stage2
- -$(MAKE) clean
-
-risky-stage3: stage3
- -$(MAKE) clean
-
-risky-stage4: stage4
- -$(MAKE) clean
-
-#In GNU Make, ignore whether `stage*' exists.
-.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
-.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
-.PHONY: stagefeedback stageprofile
-
# -----------------------------------------------------
# Rules for generating translated message descriptions.
# Disabled by autoconf if the tools are not available.
OSDN Git Service
