MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS = --no-split
TEXI2DVI = texi2dvi
+TEXI2HTML = $(MAKEINFO) --html
TEXI2POD = perl $(srcdir)/../contrib/texi2pod.pl
POD2MAN = pod2man --center="GNU" --release="gcc-$(version)"
# Some versions of `touch' (such as the version on Solaris 2.8)
# Dir for temp files.
tmpdir = /tmp
+# Directory in which to put HTML
+htmldir = $(objdir)/HTML/gcc-$(version)
+
# Whether we were configured with NLS.
USE_NLS = @USE_NLS@
integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
loop.o modulo-sched.o optabs.o options.o opts.o \
params.o postreload.o postreload-gcse.o predict.o \
- insn-preds.o integrate.o intl.o jump.o langhooks.o lcm.o lists.o \
- local-alloc.o loop.o modulo-sched.o optabs.o options.o opts.o \
- params.o pointer-set.o postreload.o postreload-gcse.o predict.o \
+ insn-preds.o pointer-set.o postreload.o \
print-rtl.o print-tree.o value-prof.o var-tracking.o \
profile.o ra.o ra-build.o ra-colorize.o ra-debug.o ra-rewrite.o \
real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
mklibgcc: $(srcdir)/mklibgcc.in
CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
-mkheaders: $(srcdir)/mkheaders.in
- CONFIG_FILES=mkheaders CONFIG_HEADERS= ./config.status
-
# cstamp-h.in controls rebuilding of config.in.
# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
# delete it. A stamp file is needed as autoheader won't update the file if
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) varray.h $(EXPR_H) \
output.h diagnostic.h $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(GGC_H) $(RECOG_H) insn-config.h $(HASHTAB_H) $(SCEV_H) \
- cfgloop.h $(PARAMS_H)
+ cfgloop.h $(PARAMS_H) sbitmap.h
tree-ssa-loop-manip.o : tree-ssa-loop-manip.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) \
output.h diagnostic.h $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
chmod a+r include/limits.h
# Install the README
rm -f include/README
- cp $(srcdir)/README-fixinc include/README
+ cp $(srcdir)/../fixincludes/README-fixinc include/README
chmod a+r include/README
$(STAMP) $@
-# fixinc.sh depends on this, not on specs directly.
-# The idea is to make sure specs gets built, but not rerun fixinc.sh
-# after each stage just because specs' mtime has changed.
-# It also depends on cc1 since fixinc.sh uses it.
-specs.ready: specs cc1$(exeext)
- -if [ -f specs.ready ] ; then \
- true; \
- else \
- $(STAMP) specs.ready; \
- fi
-
-fixinc.sh: mkfixinc.sh fixinc.in
- build_subdir="$(build_subdir)" srcdir="$(srcdir)" \
- $(SHELL) $(srcdir)/mkfixinc.sh $(build) $(target)
-
.PHONY: install-gcc-tooldir
install-gcc-tooldir:
$(mkinstalldirs) $(DESTDIR)$(gcc_tooldir)
+macro_list : $(GCC_PASSES)
+ echo | $(GCC_FOR_TARGET) -E -dM - | \
+ sed -n 's/^#define \([^_][a-zA-Z0-9_]*\).*/\1/p ; \
+ s/^#define \(_[^_A-Z][a-zA-Z0-9_]*\).*/\1/p' | \
+ sort -u > tmp-$@
+ $(SHELL) $(srcdir)/../move-if-change tmp-$@ $@
+
# Build fixed copies of system files.
-stmp-fixinc: fixinc.sh gsyslimits.h specs.ready
+stmp-fixinc: gsyslimits.h macro_list \
+ ../$(build_subdir)/fixincludes/fixincl \
+ ../$(build_subdir)/fixincludes/fixinc.sh
@if test ! -d ${SYSTEM_HEADER_DIR}; then \
echo The directory that should contain system headers does not exist: >&2 ; \
echo " ${SYSTEM_HEADER_DIR}" >&2 ; \
rm -rf include; mkdir include
-chmod a+rx include
(TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
- SHELL='$(SHELL)' ;\
- export TARGET_MACHINE srcdir SHELL ; \
- $(SHELL) ./fixinc.sh `${PWD_COMMAND}`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \
- rm -f include/syslimits.h; \
+ SHELL='$(SHELL)'; MACRO_LIST=`${PWD_COMMAND}`/macro_list ; \
+ export TARGET_MACHINE srcdir SHELL MACRO_LIST && \
+ cd ../$(build_subdir)/fixincludes && \
+ $(SHELL) ./fixinc.sh ../../gcc/include \
+ $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) )
+ rm -f include/syslimits.h
if [ -f include/limits.h ]; then \
mv include/limits.h include/syslimits.h; \
else \
cp $(srcdir)/gsyslimits.h include/syslimits.h; \
- fi; \
- chmod a+r include/syslimits.h)
+ fi
+ chmod a+r include/syslimits.h
$(STAMP) stmp-fixinc
# Files related to the fixproto script.
$(STAMP) include/fixed; \
fi
$(STAMP) stmp-fixproto
+
+# We can't run fixproto (it's being built for a different host), but we still
+# need to install it so that the user can run it when the compiler is
+# installed.
+stmp-install-fixproto: fixproto
+ $(STAMP) $@
#\f
# Remake the info files.
doc/gccint.dvi: $(TEXI_GCCINT_FILES)
doc/cppinternals.dvi: $(TEXI_CPPINT_FILES)
+$(htmldir)/cpp/index.html: $(TEXI_CPP_FILES)
+$(htmldir)/gcc/index.html: $(TEXI_GCC_FILES)
+$(htmldir)/gccint/index.html: $(TEXI_GCCINT_FILES)
+$(htmldir)/cppinternals/index.html: $(TEXI_CPPINT_FILES)
+
dvi:: doc/gcc.dvi doc/gccint.dvi doc/gccinstall.dvi doc/cpp.dvi \
doc/cppinternals.dvi
doc/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES)
$(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
+html:: $(htmldir)/cpp/index.html $(htmldir)/gcc/index.html \
+ $(htmldir)/gccinstall/index.html $(htmldir)/gccint/index.html \
+ $(htmldir)/cppinternals/index.html
+
+$(htmldir)/%/index.html: %.texi
+ $(mkinstalldirs) $(@D)
+ rm -f $(@D)/*
+ $(TEXI2HTML) -I $(abs_docdir) -I $(abs_docdir)/include -o $(@D) $<
+
+# Duplicate entry to handle renaming of gccinstall
+$(htmldir)/gccinstall/index.html: $(TEXI_GCCINSTALL_FILES)
+ $(mkinstalldirs) $(@D)
+ echo rm -f $(@D)/*
+ $(TEXI2HTML) -I $(abs_docdir) -I $(abs_docdir)/include -o $(@D) $<
+
MANFILES = doc/gcov.1 doc/cpp.1 doc/gcc.1 doc/gfdl.7 doc/gpl.7 doc/fsf-funding.7
generated-manpages: man
-rm -f specs $(SPECS) SYSCALLS.c.X SYSCALLS.c
-rm -f collect collect2 mips-tfile mips-tdump
# Delete files generated for fixproto
- -rm -rf fix-header$(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \
+ -rm -rf $(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \
gen-protos$(build_exeext) fixproto.list fixtmp.* fixhdr.ready
-# Delete files generated for fixincl
- -rm -rf fixinc.sh specs.ready
# Delete unwanted output files from TeX.
-rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
-rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
-cd testsuite && rm -f *.out *.gcov *$(coverageexts)
-rm -rf ${QMTEST_DIR} stamp-qmtest
-rm -f cxxmain.c
- -rm -f mklibgcc mkheaders gccbug .gdbinit configargs.h
+ -rm -f mklibgcc gccbug .gdbinit configargs.h
-rm -f gcov.pod
- -rm -f fixinc/Makefile
# Delete po/*.gmo only if we are not building in the source directory.
-if [ ! -f po/exgettext ]; then rm -f po/*.gmo; fi
- -rmdir ada cp f java objc fixinc intl po testsuite 2>/dev/null
+ -rmdir ada cp f java objc intl po testsuite 2>/dev/null
# Get rid of every file that's generated from some other file, except for `configure'.
# Most of these files ARE PRESENT in the GCC distribution.
itoolsdir = $(libexecsubdir)/install-tools
itoolsdatadir = $(libsubdir)/install-tools
-# Don't install the headers. Instead, install appropriate scripts
-# and supporting files for fixincludes to be run later.
+# Install supporting files for fixincludes to be run later.
install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir \
- mkheaders xlimits.h
- -rm -rf $(DESTDIR)$(itoolsdir) $(DESTDIR)$(itoolsdatadir)
- $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include
- $(mkinstalldirs) $(DESTDIR)$(itoolsdir)
+ macro_list xlimits.h
for file in $(USER_H); do \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$file \
$(DESTDIR)$(itoolsdatadir)/include/$$realfile ; \
done
$(INSTALL_DATA) xlimits.h $(DESTDIR)$(itoolsdatadir)/include/limits.h
- if [ x$(STMP_FIXINC) != x ] ; then \
- $(INSTALL_DATA) $(srcdir)/README-fixinc \
- $(DESTDIR)$(itoolsdatadir)/include/README ; \
- $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh ; \
- $(INSTALL_PROGRAM) ../$(build_subdir)/fixincludes/fixincl$(build_exeext) \
- $(DESTDIR)$(itoolsdir)/fixincl ; \
- $(INSTALL_DATA) $(srcdir)/gsyslimits.h \
- $(DESTDIR)$(itoolsdatadir)/gsyslimits.h ; \
- else :; fi
+ $(INSTALL_DATA) $(srcdir)/gsyslimits.h \
+ $(DESTDIR)$(itoolsdatadir)/gsyslimits.h
+ $(INSTALL_DATA) macro_list $(DESTDIR)$(itoolsdatadir)/macro_list
if [ x$(STMP_FIXPROTO) != x ] ; then \
$(INSTALL_SCRIPT) $(mkinstalldirs) \
$(DESTDIR)$(itoolsdir)/mkinstalldirs ; \
$(INSTALL_PROGRAM) build/fix-header$(build_exeext) \
$(DESTDIR)$(itoolsdir)/fix-header$(build_exeext) ; \
else :; fi
- $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders
echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
echo 'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \
OSDN Git Service
