# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
# 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008 Free Software Foundation, Inc.
+# 2008, 2009 Free Software Foundation, Inc.
#This file is part of GCC.
SYSCALLS.c.X-warn = -Wno-strict-prototypes -Wno-error
# dfp.c contains alias violations
dfp.o-warn = -Wno-error
-# bitmap.c contains -Wc++compat warnings.
-bitmap.o-warn = -Wno-error
-# dominance.c contains a -Wc++compat warning.
-dominance.o-warn = -Wno-error
-# graphite.c contains code calling cloog that has problems.
-graphite.o-warn = -Wno-error
# mips-tfile.c contains -Wcast-qual warnings.
mips-tfile.o-warn = -Wno-error
xm_include_list=@xm_include_list@
xm_defines=@xm_defines@
lang_checks=check-gcc
+lang_checks_parallelized=check-gcc
+# This lists a couple of test files that take most time during check-gcc.
+# When doing parallelized check-gcc, these can run in parallel with the
+# remaining tests. Each word in this variable stands for work for one
+# make goal and one extra make goal is added to handle all the *.exp
+# files not handled explicitly already. If multiple *.exp files
+# should be run in the same runtest invocation (usually if they aren't
+# very long running, but still should be split of from the check-parallel-$lang
+# remaining tests runtest invocation), they should be concatenated with commas.
+# Note that [a-zA-Z] wildcards need to have []s prefixed with \ (needed
+# by tcl) and as the *.exp arguments are mached both as is and with
+# */ prefixed to it in runtest_file_p, it is usually desirable to include
+# a subdirectory name.
+check_gcc_parallelize=execute.exp=execute/2* \
+ execute.exp=execute/\[013-9a-zA-Z\]* \
+ compile.exp dg.exp \
+ struct-layout-1.exp,unsorted.exp,stackalign.exp,i386.exp
lang_opt_files=@lang_opt_files@ $(srcdir)/c.opt $(srcdir)/common.opt
lang_specs_files=@lang_specs_files@
lang_tree_files=@lang_tree_files@
EXPR_H = expr.h insn-config.h $(FUNCTION_H) $(RTL_H) $(FLAGS_H) $(TREE_H) $(MACHMODE_H) $(EMIT_RTL_H)
OPTABS_H = optabs.h insn-codes.h
REGS_H = regs.h varray.h $(MACHMODE_H) $(OBSTACK_H) $(BASIC_BLOCK_H) $(FUNCTION_H)
-RA_H = ra.h $(REGS_H)
RESOURCE_H = resource.h hard-reg-set.h
SCHED_INT_H = sched-int.h $(INSN_ATTR_H) $(BASIC_BLOCK_H) $(RTL_H) $(DF_H) vecprim.h
SEL_SCHED_IR_H = sel-sched-ir.h $(INSN_ATTR_H) $(BASIC_BLOCK_H) $(RTL_H) \
# How to link with both our special library facilities
# and the system's installed libraries.
-LIBS = @LIBS@ $(CPPLIB) $(LIBINTL) $(LIBICONV) $(LIBIBERTY) $(LIBDECNUMBER) \
- $(GMPLIBS) $(CLOOGLIBS) $(PPLLIBS)
-
+LIBS = @LIBS@ $(CPPLIB) $(LIBINTL) $(LIBICONV) $(LIBIBERTY) $(LIBDECNUMBER)
+BACKENDLIBS = $(CLOOGLIBS) $(PPLLIBS) $(GMPLIBS)
# Any system libraries needed just for GNAT.
SYSLIBS = @GNAT_LIBEXC@
gimple-low.o \
gimple-pretty-print.o \
gimplify.o \
- global.o \
graph.o \
graphds.o \
graphite.o \
langhooks.o \
lcm.o \
lists.o \
- local-alloc.o \
loop-doloop.o \
loop-init.o \
loop-invariant.o \
print-rtl.o \
print-tree.o \
profile.o \
- ra-conflict.o \
real.o \
recog.o \
reg-stack.o \
- regclass.o \
+ reginfo.o \
regmove.o \
regrename.o \
regstat.o \
tree-switch-conversion.o \
tree-ssa-address.o \
tree-ssa-alias.o \
- tree-ssa-alias-warnings.o \
tree-ssa-ccp.o \
tree-ssa-coalesce.o \
tree-ssa-copy.o \
cc1-dummy$(exeext): $(C_OBJS) dummy-checksum.o $(BACKEND) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) dummy-checksum.o \
- $(BACKEND) $(LIBS) $(GMPLIBS)
+ $(BACKEND) $(LIBS) $(BACKENDLIBS)
cc1-checksum.c : cc1-dummy$(exeext) build/genchecksum$(build_exeext)
build/genchecksum$(build_exeext) cc1-dummy$(exeext) > $@
cc1$(exeext): $(C_OBJS) cc1-checksum.o $(BACKEND) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) cc1-checksum.o \
- $(BACKEND) $(LIBS) $(GMPLIBS)
+ $(BACKEND) $(LIBS) $(BACKENDLIBS)
#\f
# Build libgcc.a.
$(TOPLEV_H)
tree-ssa-structalias.o: tree-ssa-structalias.c tree-ssa-structalias.h \
$(SYSTEM_H) $(CONFIG_H) coretypes.h $(TM_H) $(GGC_H) $(OBSTACK_H) $(BITMAP_H) \
- $(FLAGS_H) $(RTL_H) $(TM_P_H) hard-reg-set.h $(BASIC_BLOCK_H) output.h errors.h \
+ $(FLAGS_H) $(RTL_H) $(TM_P_H) hard-reg-set.h $(BASIC_BLOCK_H) output.h \
$(DIAGNOSTIC_H) $(TREE_H) $(C_COMMON_H) $(TREE_FLOW_H) $(TREE_INLINE_H) varray.h \
$(C_TREE_H) $(GIMPLE_H) $(HASHTAB_H) $(FUNCTION_H) $(CGRAPH_H) tree-pass.h \
$(TIMEVAR_H) alloc-pool.h $(SPLAY_TREE_H) $(PARAMS_H) gt-tree-ssa-structalias.h \
tree-ssa-dse.o : tree-ssa-dse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(GGC_H) $(TREE_H) $(RTL_H) $(TM_P_H) $(BASIC_BLOCK_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) domwalk.h $(FLAGS_H) \
- $(DIAGNOSTIC_H) $(TIMEVAR_H)
+ $(DIAGNOSTIC_H) $(TIMEVAR_H) langhooks.h
tree-ssa-forwprop.o : tree-ssa-forwprop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(GGC_H) $(TREE_H) $(RTL_H) $(TM_P_H) $(BASIC_BLOCK_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) $(DIAGNOSTIC_H) $(TIMEVAR_H) \
tree-ssa-math-opts.o : tree-ssa-math-opts.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(FLAGS_H) $(TREE_H) $(TREE_FLOW_H) $(REAL_H) $(TIMEVAR_H) tree-pass.h \
alloc-pool.h $(BASIC_BLOCK_H) $(TARGET_H)
-tree-ssa-alias-warnings.o : tree-ssa-alias-warnings.c \
- $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(TREE_DUMP_H) \
- $(TREE_FLOW_H) $(PARAMS_H) $(FUNCTION_H) $(EXPR_H) $(TOPLEV_H) \
- tree-ssa-structalias.h tree-ssa-propagate.h langhooks.h alloc-pool.h \
- $(DIAGNOSTIC_H)
tree-ssa-alias.o : tree-ssa-alias.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) $(TREE_INLINE_H) $(FLAGS_H) \
$(FUNCTION_H) $(TIMEVAR_H) convert.h $(TM_H) coretypes.h langhooks.h \
hard-reg-set.h $(GIMPLE_H) vec.h tree-ssa-structalias.h \
$(IPA_TYPE_ESCAPE_H) vecprim.h pointer-set.h alloc-pool.h
tree-ssa-reassoc.o : tree-ssa-reassoc.c $(TREE_FLOW_H) $(CONFIG_H) \
- $(SYSTEM_H) $(TREE_H) $(GGC_H) $(DIAGNOSTIC_H) errors.h $(TIMEVAR_H) \
+ $(SYSTEM_H) $(TREE_H) $(GGC_H) $(DIAGNOSTIC_H) $(TIMEVAR_H) \
$(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H) tree-iterator.h\
$(BASIC_BLOCK_H) $(GIMPLE_H) $(TREE_INLINE_H) vec.h langhooks.h \
alloc-pool.h pointer-set.h $(CFGLOOP_H)
graphite.o: graphite.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(GGC_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) $(DIAGNOSTIC_H) $(TOPLEV_H) \
$(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) $(CFGLOOP_H) $(GIMPLE_H) domwalk.h \
- $(TREE_DATA_REF_H) $(SCEV_H) tree-pass.h tree-chrec.h graphite.h pointer-set.h
+ $(TREE_DATA_REF_H) $(SCEV_H) tree-pass.h tree-chrec.h graphite.h pointer-set.h \
+ value-prof.h
tree-vect-analyze.o: tree-vect-analyze.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(GGC_H) $(OPTABS_H) $(TREE_H) $(RECOG_H) $(BASIC_BLOCK_H) \
$(DIAGNOSTIC_H) $(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) $(CFGLOOP_H) \
coverage.o : coverage.c $(GCOV_IO_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(RTL_H) $(TREE_H) $(FLAGS_H) output.h $(REGS_H) $(EXPR_H) \
$(FUNCTION_H) $(TOPLEV_H) $(GGC_H) langhooks.h $(COVERAGE_H) gt-coverage.h \
- $(HASHTAB_H) tree-iterator.h $(CGRAPH_H) tree-pass.h gcov-io.c
+ $(HASHTAB_H) tree-iterator.h $(CGRAPH_H) tree-pass.h gcov-io.c $(TM_P_H)
cselib.o : cselib.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(REGS_H) hard-reg-set.h $(FLAGS_H) $(REAL_H) insn-config.h $(RECOG_H) \
$(EMIT_RTL_H) $(TOPLEV_H) output.h $(FUNCTION_H) cselib.h $(GGC_H) $(TM_P_H) \
$(DF_H) $(DBGCNT_H)
dce.o : dce.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TREE_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) $(DF_H) cselib.h \
- $(DBGCNT_H) dce.h $(TIMEVAR_H) tree-pass.h $(DBGCNT_H)
+ $(DBGCNT_H) dce.h $(TIMEVAR_H) tree-pass.h $(DBGCNT_H) $(TM_P_H)
dse.o : dse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TREE_H) $(TM_P_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) insn-config.h \
$(RECOG_H) $(EXPR_H) $(DF_H) cselib.h $(DBGCNT_H) $(TIMEVAR_H) tree-pass.h \
- alloc-pool.h $(ALIAS_H) dse.h $(OPTABS_H)
+ alloc-pool.h $(ALIAS_H) dse.h $(OPTABS_H) $(TARGET_H)
fwprop.o : fwprop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TOPLEV_H) insn-config.h $(RECOG_H) $(FLAGS_H) $(OBSTACK_H) $(BASIC_BLOCK_H) \
output.h $(DF_H) alloc-pool.h $(TIMEVAR_H) tree-pass.h $(TARGET_H) $(TM_P_H) \
loop-invariant.o : loop-invariant.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
$(BASIC_BLOCK_H) hard-reg-set.h $(CFGLOOP_H) $(EXPR_H) $(RECOG_H) coretypes.h \
$(TM_H) $(TM_P_H) $(FUNCTION_H) $(FLAGS_H) $(DF_H) $(OBSTACK_H) output.h \
- $(HASHTAB_H) except.h
+ $(HASHTAB_H) except.h $(PARAMS_H)
cfgloopmanip.o : cfgloopmanip.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
$(BASIC_BLOCK_H) hard-reg-set.h $(CFGLOOP_H) $(CFGLAYOUT_H) output.h \
coretypes.h $(TM_H) cfghooks.h $(OBSTACK_H) $(TREE_FLOW_H)
rtlhooks-def.h $(BASIC_BLOCK_H) $(RECOG_H) $(REAL_H) hard-reg-set.h \
$(TOPLEV_H) $(TM_P_H) $(TREE_H) $(TARGET_H) output.h $(PARAMS_H) $(OPTABS_H) \
insn-codes.h $(TIMEVAR_H) tree-pass.h $(DF_H) vecprim.h $(CGRAPH_H)
-regclass.o : regclass.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
+reginfo.o : reginfo.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
hard-reg-set.h $(FLAGS_H) $(BASIC_BLOCK_H) addresses.h $(REGS_H) insn-config.h \
$(RECOG_H) reload.h $(REAL_H) $(TOPLEV_H) $(FUNCTION_H) output.h $(GGC_H) \
- $(TM_P_H) $(EXPR_H) $(TIMEVAR_H) gt-regclass.h $(HASHTAB_H) \
- $(TARGET_H) tree-pass.h $(DF_H)
-local-alloc.o : local-alloc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
- $(RTL_H) $(FLAGS_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
- output.h $(FUNCTION_H) $(INSN_ATTR_H) $(TOPLEV_H) except.h reload.h $(TM_P_H) \
- $(GGC_H) $(INTEGRATE_H) $(TIMEVAR_H) tree-pass.h $(DF_H) $(DBGCNT_H)
+ $(TM_P_H) $(EXPR_H) $(TIMEVAR_H) gt-reginfo.h $(HASHTAB_H) \
+ $(TARGET_H) tree-pass.h $(DF_H) ira.h
bitmap.o : bitmap.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FLAGS_H) $(GGC_H) gt-bitmap.h $(BITMAP_H) $(OBSTACK_H) $(HASHTAB_H)
-global.o : global.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
- $(FLAGS_H) reload.h $(FUNCTION_H) $(RECOG_H) $(REGS_H) hard-reg-set.h \
- insn-config.h output.h $(TOPLEV_H) $(TM_P_H) $(MACHMODE_H) tree-pass.h \
- $(TIMEVAR_H) vecprim.h $(DF_H) $(DBGCNT_H) $(RA_H)
-ra-conflict.o : ra-conflict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
- $(FLAGS_H) reload.h $(FUNCTION_H) $(RECOG_H) $(REGS_H) hard-reg-set.h \
- insn-config.h output.h $(TOPLEV_H) $(TM_P_H) $(MACHMODE_H) tree-pass.h \
- $(TIMEVAR_H) vecprim.h $(DF_H) $(RA_H) sbitmap.h sparseset.h
varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GGC_H) \
$(HASHTAB_H) $(BCONFIG_H) $(VARRAY_H) $(TOPLEV_H)
vec.o : vec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h vec.h $(GGC_H) \
ira-conflicts.o: ira-conflicts.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TARGET_H) $(RTL_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) \
insn-config.h $(RECOG_H) $(BASIC_BLOCK_H) $(TOPLEV_H) $(TM_P_H) $(PARAMS_H) \
- $(DF_H) sparseset.h $(IRA_INT_H)
+ $(DF_H) sparseset.h addresses.h $(IRA_INT_H)
ira-color.o: ira-color.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TARGET_H) $(RTL_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) \
$(EXPR_H) $(BASIC_BLOCK_H) $(TOPLEV_H) $(TM_P_H) $(PARAMS_H) \
$(EXPR_H) $(BASIC_BLOCK_H) $(TOPLEV_H) $(TM_P_H) $(PARAMS_H) \
$(IRA_INT_H)
ira-lives.o: ira-lives.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
- $(TARGET_H) $(RTL_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) \
+ $(TARGET_H) $(RTL_H) $(REGS_H) except.h hard-reg-set.h $(FLAGS_H) \
insn-config.h $(RECOG_H) $(BASIC_BLOCK_H) $(TOPLEV_H) $(TM_P_H) $(PARAMS_H) \
$(DF_H) sparseset.h $(IRA_INT_H)
ira.o: ira.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(srcdir)/tree-vect-generic.c \
$(srcdir)/dojump.c \
$(srcdir)/emit-rtl.c $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \
+ $(srcdir)/expr.h \
$(srcdir)/function.c $(srcdir)/except.h \
$(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \
- $(srcdir)/profile.c $(srcdir)/regclass.c $(srcdir)/mcf.c \
+ $(srcdir)/profile.c $(srcdir)/reginfo.c $(srcdir)/mcf.c \
$(srcdir)/reg-stack.c $(srcdir)/cfglayout.c $(srcdir)/cfglayout.h \
$(srcdir)/sdbout.c $(srcdir)/stor-layout.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
check: $(CHECK_TARGETS)
+check-subtargets: $(patsubst %,%-subtargets,$(CHECK_TARGETS))
+
# The idea is to parallelize testing of multilibs, for example:
# make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
# will run 3 concurrent sessions of check-gcc, eventually testing
-rm -f $@
sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)|' < site.exp > $@
-$(lang_checks): check-% : site.exp
+# This is only used for check-% targets that aren't parallelized.
+$(filter-out $(lang_checks_parallelized),$(lang_checks)): check-% : site.exp
-test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
test -d $(TESTSUITEDIR)/$* || mkdir $(TESTSUITEDIR)/$*
-(rootme=`${PWD_COMMAND}`; export rootme; \
GCC_EXEC_PREFIX="$(libdir)/gcc/" ; export GCC_EXEC_PREFIX ; \
$(RUNTEST) --tool $* $(RUNTESTFLAGS))
+$(patsubst %,%-subtargets,$(filter-out $(lang_checks_parallelized),$(lang_checks))): check-%-subtargets:
+ @echo check-$*
+
+check_p_tool=$(firstword $(subst _, ,$*))
+check_p_vars=$(check_$(check_p_tool)_parallelize)
+check_p_subno=$(word 2,$(subst _, ,$*))
+check_p_comma=,
+check_p_subwork=$(subst $(check_p_comma), ,$(if $(check_p_subno),$(word $(check_p_subno),$(check_p_vars))))
+check_p_numbers=1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+check_p_subdir=$(subst _,,$*)
+check_p_subdirs=$(wordlist 1,$(words $(check_$*_parallelize)),$(check_p_numbers))
+
+# For parallelized check-% targets, this decides whether parallelization
+# is desirable (if -jN is used and RUNTESTFLAGS doesn't contain anything
+# but optionally --target_board argument). If it is desirable,
+# recursive make is run with check-parallel-$lang{,1,2,3,4,5} etc. goals,
+# which can be executed in parallel, as they are run in separate directories.
+# check-parallel-$lang{1,2,3,4,5} etc. goals invoke runtest with the longest
+# running *.exp files from the testsuite, as determined by check_$lang_parallelize
+# variable. The check-parallel-$lang goal in that case invokes runtest with
+# all the remaining *.exp files not handled by the separate goals.
+# Afterwards contrib/dg-extract-results.sh is used to merge the sum and log
+# files. If parallelization isn't desirable, only one recursive make
+# is run with check-parallel-$lang goal and check_$lang_parallelize variable
+# cleared to say that no additional arguments beyond $(RUNTESTFLAGS)
+# should be passed to runtest.
+#
+# To parallelize some language check, add the corresponding check-$lang
+# to lang_checks_parallelized variable and define check_$lang_parallelize
+# variable (see above check_gcc_parallelize description).
+$(lang_checks_parallelized): check-% : site.exp
+ @if [ -z "$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
+ && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ $(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
+ check-parallel-$* \
+ $(patsubst %,check-parallel-$*_%, $(check_p_subdirs)); \
+ for file in $(TESTSUITEDIR)/$*/$* \
+ $(patsubst %,$(TESTSUITEDIR)/$*%/$*,$(check_p_subdirs));\
+ do \
+ mv -f $$file.sum $$file.sum.sep; mv -f $$file.log $$file.log.sep; \
+ done; \
+ $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh \
+ $(TESTSUITEDIR)/$*/$*.sum.sep \
+ $(patsubst %,$(TESTSUITEDIR)/$*%/$*.sum.sep,$(check_p_subdirs)) \
+ > $(TESTSUITEDIR)/$*/$*.sum; \
+ $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L \
+ $(TESTSUITEDIR)/$*/$*.log.sep \
+ $(patsubst %,$(TESTSUITEDIR)/$*%/$*.log.sep,$(check_p_subdirs)) \
+ > $(TESTSUITEDIR)/$*/$*.log; \
+ else \
+ $(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
+ check_$*_parallelize= check-parallel-$*; \
+ fi
+
+# Just print the parallelized subtargets for those that want to split
+# the testing across machines.
+$(patsubst %,%-subtargets,$(lang_checks_parallelized)): check-%-subtargets:
+ @echo check-parallel-$* \
+ $(patsubst %,check-parallel-$*_%, $(check_p_subdirs))
+
+# In the if [ -n "$(check_p_subno)" ] case runtest should be given the name of
+# the given *.exp file(s). See comment above check_gcc_parallelize variable
+# for details on the content of these variables.
+#
+# In the elif [ -n "$(check_p_vars)" ] case runtest should be given
+# names of all the *.exp files for this tool that aren't already handled by
+# other goals. First it finds all the *.exp files for this tool, then
+# prunes those already specified in check_$lang_parallelize or duplicates.
+#
+# Otherwise check-$lang isn't parallelized and runtest is invoked just with
+# the $(RUNTESTFLAGS) arguments.
+check-parallel-% : site.exp
+ -test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
+ test -d $(TESTSUITEDIR)/$(check_p_subdir) || mkdir $(TESTSUITEDIR)/$(check_p_subdir)
+ -(rootme=`${PWD_COMMAND}`; export rootme; \
+ srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
+ cd $(TESTSUITEDIR)/$(check_p_subdir); \
+ rm -f tmp-site.exp; \
+ sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)/$(check_p_subdir)|' \
+ < ../../site.exp > tmp-site.exp; \
+ $(SHELL) $${srcdir}/../move-if-change tmp-site.exp site.exp; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $${rootme}/../expect/expect ] ; then \
+ TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
+ export TCL_LIBRARY ; fi ; \
+ GCC_EXEC_PREFIX="$(libdir)/gcc/" ; export GCC_EXEC_PREFIX ; \
+ runtestflags= ; \
+ if [ -n "$(check_p_subno)" ] ; then \
+ runtestflags="$(check_p_subwork)"; \
+ elif [ -n "$(check_p_vars)" ] ; then \
+ parts="`echo ' $(strip $(subst $(check_p_comma), ,$(check_p_vars))) ' \
+ | sed 's/=[^ ]* / /g'`"; \
+ for part in `find $$srcdir/testsuite/$(check_p_tool)* -name \*.exp` ; do \
+ part=`basename $$part` ; \
+ case " $$parts $$runtestflags " in \
+ *" $$part "*) ;; \
+ *) runtestflags="$$runtestflags $$part" ;; \
+ esac ; \
+ done ; \
+ fi ; \
+ $(RUNTEST) --tool $(check_p_tool) $(RUNTESTFLAGS) $$runtestflags)
+
check-consistency: testsuite/site.exp
-rootme=`${PWD_COMMAND}`; export rootme; \
srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
${QMTEST_DIR} stamp-qmtest:
${QMTEST} -D ${QMTEST_DIR} create-tdb \
-c gcc_database.GCCDatabase \
- -a srcdir=`cd ${srcdir}/testsuite && ${PWD_COMMAND}` && \
+ -a srcdir=`cd ${srcdir}/testsuite && ${PWD_COMMAND}` && \
$(STAMP) stamp-qmtest
# Create the QMTest context file.
# N.B. We do not attempt to copy these into $(srcdir). The snapshot
# script does that.
.po.gmo:
- -test -d po || mkdir po
+ $(mkinstalldirs) po
$(GMSGFMT) --statistics -o $@ $<
# The new .po has to be gone over by hand, so we deposit it into
# If build/po/gcc.pot exists, use it (it was just created),
# else use the one in srcdir.
.po.pox:
- -test -d po || mkdir po
+ $(mkinstalldirs) po
$(MSGMERGE) $< `if test -f po/gcc.pot; \
then echo po/gcc.pot; \
else echo $(srcdir)/po/gcc.pot; fi` -o $@
# The .pot file is left in the build directory.
gcc.pot: po/gcc.pot
po/gcc.pot: force
- -test -d po || mkdir po
+ $(mkinstalldirs) po
$(MAKE) srcextra
AWK=$(AWK) $(SHELL) $(srcdir)/po/exgettext \
$(XGETTEXT) gcc $(srcdir)
OSDN Git Service
