# Standard autoconf-set variables
# -------------------------------
-# Directory where sources are, from where we are.
-VPATH = @srcdir@
-
build=@build@
host=@host@
target=@target@
-target_alias=@target_alias@
+target_noncanonical=@target_noncanonical@
# Sed command to transform gcc to installed name.
program_transform_name = @program_transform_name@
-program_transform_cross_name = @program_transform_name@
# -----------------------------
# Directories used during build
srcdir = @srcdir@
# These directories contain files that are provided as part of a FSF tarball,
-# but not provided in CVS. Some GCC integrators like to use the CVS sources
-# but keep them read-only during a build, and so change these variables
-# from these defaults.
-parsedir = $(srcdir)
-docobjdir = $(srcdir)/doc
+# but not provided in CVS. Unless --enable-generated-files-in-srcdir is
+# specified these files will be put in the object directory.
+parsedir = @parsedir@
+docobjdir = @docobjdir@
+docdir = $(srcdir)/doc
# Top build directory, relative to here.
top_builddir = ..
objdir = @objdir@
# --------
+# Defined vpaths
+# --------
+
+# Directory where sources are, from where we are.
+VPATH = @srcdir@
+
+# We define a vpath for the sources of the .texi files here because they
+# are split between multiple directories and we would rather use one implicit
+# pattern rule for everything.
+# This vpath could be extended within the Make-lang fragments.
+
+vpath %.texi $(docdir):$(docdir)/include
+
+# ----
+# Default values for variables overridden in Makefile fragments.
+# These need to be quite early in the Makefile so as to avoid
+# trouble induced by changes in fragment ordering.
+# ----
+
+# For ada/Make-lang.in; overridden in, for example, config/pa/x-ada.
+X_ADA_CFLAGS =
+T_ADA_CFLAGS =
+X_ADAFLAGS =
+T_ADAFLAGS =
+
+# --------
# UNSORTED
# --------
# stage1, as not all versions of gcc understand -Wno-long-long.
LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
STRICT_WARN = @strict1_warn@
-STRICT2_WARN = -pedantic -Wno-long-long @WERROR@
+STRICT2_WARN = -pedantic -Wno-long-long -Wold-style-definition @WERROR@
# This is set by --enable-checking. The idea is to catch forgotten
# "extern" tags in header files.
c-parse.o-warn = -Wno-error
# flex output may yield harmless "no previous prototype" warnings
gengtype-lex.o-warn = -Wno-error
+# SYSCALLS.c misses prototypes
+SYSCALLS.c.X-warn = -Wno-strict-prototypes -Wno-error
# All warnings have to be shut off in stage1 if the compiler used then
# isn't gcc; configure determines that. WARN_CFLAGS will be either
X_CPPFLAGS =
T_CPPFLAGS =
-ADAC = @ADAC@
AWK = @AWK@
CC = @CC@
BISON = @BISON@
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -isystem ./include to find, e.g., stddef.h.
-GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -isystem ./include $(TCFLAGS)
+GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -Wold-style-definition $($@-warn) -isystem ./include $(TCFLAGS)
# ---------------------------------------------------
# Programs which produce files for the target machine
if [ "$(host)" = "$(target)" ] ; then \
echo ar; \
else \
- t='$(program_transform_cross_name)'; echo ar | sed -e $$t ; \
+ t='$(program_transform_name)'; echo ar | sed -e $$t ; \
fi; \
fi`
AR_FLAGS_FOR_TARGET =
if [ "$(host)" = "$(target)" ] ; then \
echo $(RANLIB); \
else \
- t='$(program_transform_cross_name)'; echo ranlib | sed -e $$t ; \
+ t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
if [ "$(host)" = "$(target)" ] ; then \
echo nm; \
else \
- t='$(program_transform_cross_name)'; echo nm | sed -e $$t ; \
+ t='$(program_transform_name)'; echo nm | sed -e $$t ; \
fi; \
fi`
xm_file_list=@xm_file_list@
xm_include_list=@xm_include_list@
xm_defines=@xm_defines@
+lang_checks=check-gcc
lang_opt_files=@lang_opt_files@ $(srcdir)/c.opt $(srcdir)/common.opt
lang_specs_files=@lang_specs_files@
lang_tree_files=@lang_tree_files@
GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
GTHREAD_FLAGS=@gthread_flags@
+extra_modes_file=@extra_modes_file@
host_hook_obj=@out_host_hook_obj@
# Be prepared for gcc2 merges.
gcc_version=@gcc_version@
# --------
# Directory in which the compiler finds libraries etc.
-libsubdir = $(libdir)/gcc/$(target_alias)/$(version)
+libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(version)
# Directory in which the compiler finds executables
-libexecsubdir = $(libexecdir)/gcc/$(target_alias)/$(version)
+libexecsubdir = $(libexecdir)/gcc/$(target_noncanonical)/$(version)
# Used to produce a relative $(gcc_tooldir) in gcc.o
unlibsubdir = ../../..
# Directory in which to find other cross-compilation tools and headers.
# Used to install the shared libgcc.
slibdir = @slibdir@
# Since gcc_tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
-build_tooldir = $(exec_prefix)/$(target_alias)
+build_tooldir = $(exec_prefix)/$(target_noncanonical)
# Directory in which the compiler finds target-independent g++ includes.
gcc_gxx_include_dir = @gcc_gxx_include_dir@
# Directory to search for site-specific includes.
# Actual name to use when installing a native compiler.
GCC_INSTALL_NAME = `echo gcc|sed '$(program_transform_name)'`
-GCC_TARGET_INSTALL_NAME = $(target_alias)-`echo gcc|sed '$(program_transform_name)'`
+GCC_TARGET_INSTALL_NAME = $(target_noncanonical)-`echo gcc|sed '$(program_transform_name)'`
CPP_INSTALL_NAME = `echo cpp|sed '$(program_transform_name)'`
PROTOIZE_INSTALL_NAME = `echo protoize|sed '$(program_transform_name)'`
UNPROTOIZE_INSTALL_NAME = `echo unprotoize|sed '$(program_transform_name)'`
GCOV_INSTALL_NAME = `echo gcov|sed '$(program_transform_name)'`
GCCBUG_INSTALL_NAME = `echo gccbug|sed '$(program_transform_name)'`
-# Actual name to use when installing a cross-compiler.
-GCC_CROSS_NAME = `echo gcc|sed '$(program_transform_cross_name)'`
-CPP_CROSS_NAME = `echo cpp|sed '$(program_transform_cross_name)'`
-PROTOIZE_CROSS_NAME = `echo protoize|sed '$(program_transform_cross_name)'`
-UNPROTOIZE_CROSS_NAME = `echo unprotoize|sed '$(program_transform_cross_name)'`
-
# Setup the testing framework, if you have one
EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
echo $${rootme}/../expect/expect ; \
GTM_H = tm.h $(tm_file_list)
TM_H = $(GTM_H) insn-constants.h insn-flags.h
-TARGET_H = target.h
+TARGET_H = $(TM_H) target.h
HOOKS_H = hooks.h
LANGHOOKS_DEF_H = langhooks-def.h $(HOOKS_H)
TARGET_DEF_H = target-def.h $(HOOKS_H)
-MACHMODE_H = machmode.h machmode.def @extra_modes_file@
+MACHMODE_H = machmode.h mode-classes.def insn-modes.h
RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
RTL_H = $(RTL_BASE_H) genrtl.h input.h
PARAMS_H = params.h params.def
BUILD_LIBS = $(BUILD_LIBIBERTY)
BUILD_RTL = $(BUILD_PREFIX)rtl.o read-rtl.o $(BUILD_PREFIX)bitmap.o \
- $(BUILD_PREFIX)ggc-none.o
+ $(BUILD_PREFIX)ggc-none.o min-insn-modes.o
BUILD_SUPPORT = gensupport.o insn-conditions.o
BUILD_EARLY_SUPPORT = gensupport.o dummy-conditions.o
dwarf2asm.o dwarf2out.o dwarfout.o emit-rtl.o except.o explow.o \
expmed.o expr.o final.o flow.o fold-const.o function.o gcse.o \
genrtl.o ggc-common.o global.o graph.o gtype-desc.o \
- haifa-sched.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o \
+ haifa-sched.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o insn-modes.o \
insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
loop.o optabs.o options.o opts.o params.o postreload.o predict.o \
real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \
sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
- sibcall.o simplify-rtx.o sreal.o ssa.o ssa-ccp.o ssa-dce.o stmt.o \
- stor-layout.o stringpool.o targhooks.o timevar.o toplev.o tracer.o tree.o tree-dump.o \
- unroll.o varasm.o varray.o version.o vmsdbgout.o xcoffout.o \
- alloc-pool.o et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC)
+ sibcall.o simplify-rtx.o sreal.o stmt.o stor-layout.o stringpool.o \
+ targhooks.o timevar.o toplev.o tracer.o tree.o tree-dump.o unroll.o \
+ varasm.o varray.o version.o vmsdbgout.o xcoffout.o alloc-pool.o \
+ et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC) web.o
OBJS-md = $(out_object_file)
OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) hashtable.o tree-inline.o \
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c insn-constants.h tm-preds.h \
- tree-check.h insn-conditions.c \
- s-flags s-config s-codes s-mlib s-genrtl s-gtype gtyp-gen.h \
+ tree-check.h insn-conditions.c min-insn-modes.c insn-modes.c insn-modes.h \
+ s-flags s-config s-codes s-mlib s-genrtl s-modes s-gtype gtyp-gen.h \
s-output s-recog s-emit s-extract s-peep s-check s-conditions \
s-attr s-attrtab s-opinit s-preds s-constants s-crt0 \
genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
gencheck$(build_exeext) genpreds$(build_exeext) genconstants$(build_exeext) \
- gengtype$(build_exeext) genconditions$(build_exeext) \
+ gengtype$(build_exeext) genconditions$(build_exeext) genmodes$(build_exeext) \
genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c \
xgcc$(exeext) cpp$(exeext) cc1$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
# all.cross, start.encap, rest.encap,
# install-normal, install-common, install-info, install-man,
# uninstall,
-# mostlyclean, clean, distclean, extraclean, maintainer-clean,
+# mostlyclean, clean, distclean, maintainer-clean,
# stage1, stage2, stage3, stage4
#
# Each language is linked in with a series of hooks. The name of each
# Rebuilding this configuration
# -----------------------------
-Makefile: config.status $(srcdir)/Makefile.in $(srcdir)/version.c
+Makefile: config.status $(srcdir)/Makefile.in $(srcdir)/version.c $(LANG_MAKEFRAGS)
LANGUAGES="$(CONFIG_LANGUAGES)" \
CONFIG_HEADERS= \
+ CONFIG_SHELL="$(SHELL)" \
CONFIG_FILES=$@ $(SHELL) config.status
config.h: cs-config.h ; @true
collect2.o : collect2.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) gstab.h intl.h \
$(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DTARGET_MACHINE=\"$(target_alias)\" \
+ -DTARGET_MACHINE=\"$(target_noncanonical)\" \
-c $(srcdir)/collect2.c $(OUTPUT_OPTION)
tlink.o: tlink.c $(DEMANGLE_H) $(HASHTAB_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
c-pch.o : c-pch.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(CPPLIB_H) $(TREE_H) \
$(C_COMMON_H) output.h toplev.h c-pragma.h $(GGC_H) debug.h \
- langhooks.h flags.h hosthooks.h
+ langhooks.h flags.h hosthooks.h version.h $(TARGET_H)
+ $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+ -DHOST_MACHINE=\"$(host)\" -DTARGET_MACHINE=\"$(target)\" \
+ $< $(OUTPUT_OPTION)
# Language-independent files.
-DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc/\" \
-DSTANDARD_LIBEXEC_PREFIX=\"$(libexecdir)/gcc/\" \
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
- -DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
+ -DDEFAULT_TARGET_MACHINE=\"$(target_noncanonical)\" \
-DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \
-DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\" \
@TARGET_SYSTEM_ROOT_DEFINE@ \
gtype-desc.o: gtype-desc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) varray.h \
$(HASHTAB_H) $(TREE_H) $(RTL_H) function.h insn-config.h $(EXPR_H) $(OPTABS_H) \
libfuncs.h debug.h $(GGC_H) bitmap.h $(BASIC_BLOCK_H) hard-reg-set.h \
- ssa.h cselib.h insn-addr.h
+ cselib.h insn-addr.h
ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GGC_H) \
$(HASHTAB_H) toplev.h $(PARAMS_H) hosthooks.h
ggc-page.o: ggc-page.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
+ggc-zone.o: ggc-zone.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
+ flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
+
stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(GGC_H) gt-stringpool.h
$(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(TM_P_H) flags.h $(GGC_H) \
input.h toplev.h intl.h langhooks.h $(LANGHOOKS_DEF_H)
opts.o : opts.c opts.h options.h toplev.h $(CONFIG_H) $(SYSTEM_H) \
- coretypes.h $(TREE_H) $(TM_H) $(LANGHOOKS_H) $(GGC_H) $(RTL_H) \
+ coretypes.h $(TREE_H) $(TM_H) langhooks.h $(GGC_H) $(RTL_H) \
output.h $(DIAGNOSTIC_H) $(TM_P_H) $(INSN_ATTR_H) intl.h
targhooks.o : targhooks.c targhooks.h $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TREE_H) $(TM_H) $(RTL_H) $(TM_P_H) function.h \
function.h flags.h xcoffout.h input.h $(INSN_ATTR_H) output.h $(DIAGNOSTIC_H) \
debug.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h \
dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
- graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) \
- ssa.h $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \
+ graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) value-prof.h \
+ $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \
langhooks.h insn-flags.h cfglayout.h real.h cfgloop.h \
hosthooks.h $(LANGHOOKS_DEF_H) cgraph.h $(COVERAGE_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DTARGET_NAME=\"$(target_alias)\" \
+ -DTARGET_NAME=\"$(target_noncanonical)\" \
-c $(srcdir)/toplev.c $(OUTPUT_OPTION)
main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h
$(GGC_H) errors.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-print-rtl.o : print-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
- hard-reg-set.h $(BASIC_BLOCK_H) real.h
-rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h $(RTL_H) \
- hard-reg-set.h $(TM_P_H) insn-config.h $(RECOG_H) real.h flags.h
+print-rtl.o : print-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) real.h $(TM_P_H)
+rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h \
+ $(RTL_H) hard-reg-set.h $(TM_P_H) insn-config.h $(RECOG_H) real.h flags.h \
+ $(BASIC_BLOCK_H)
errors.o : errors.c $(CONFIG_H) $(SYSTEM_H) errors.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
expr.o : expr.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \
function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) libfuncs.h $(INSN_ATTR_H) insn-config.h \
$(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
- except.h reload.h $(GGC_H) langhooks.h intl.h $(TM_P_H) real.h
+ except.h reload.h $(GGC_H) langhooks.h intl.h $(TM_P_H) real.h $(TARGET_H)
dojump.o : dojump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h function.h $(EXPR_H) $(OPTABS_H) $(INSN_ATTR_H) insn-config.h \
langhooks.h
toplev.h $(TM_P_H) langhooks.h
explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h hard-reg-set.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) \
- toplev.h function.h $(GGC_H) $(TM_P_H) gt-explow.h
+ toplev.h function.h $(GGC_H) $(TM_P_H) langhooks.h gt-explow.h
optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h insn-config.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(RECOG_H) reload.h \
toplev.h $(GGC_H) real.h $(TM_P_H) except.h gt-optabs.h $(BASIC_BLOCK_H) \
- target.h
+ $(TARGET_H)
dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
flags.h $(REGS_H) debug.h $(TM_P_H) $(TARGET_H) function.h langhooks.h \
insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \
$(RTL_H) dwarf2.h debug.h flags.h insn-config.h reload.h output.h $(DIAGNOSTIC_H) real.h \
hard-reg-set.h $(REGS_H) $(EXPR_H) libfuncs.h toplev.h dwarf2out.h varray.h \
$(GGC_H) except.h dwarf2asm.h $(TM_P_H) langhooks.h $(HASHTAB_H) \
- gt-dwarf2out.h $(TARGET_H)
+ gt-dwarf2out.h $(TARGET_H) cgraph.h
dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) flags.h $(RTL_H) \
$(TREE_H) output.h dwarf2asm.h $(TM_P_H) $(GGC_H) gt-dwarf2asm.h
vmsdbgout.o : vmsdbgout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
output.h function.h $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H) $(TIMEVAR_H) \
except.h $(TARGET_H) $(PARAMS_H)
+web.o : web.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
+ hard-reg-set.h flags.h $(BASIC_BLOCK_H) function.h output.h toplev.h df.h
gcse.o : gcse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(GGC_H) $(RECOG_H) $(EXPR_H) \
$(BASIC_BLOCK_H) function.h output.h toplev.h $(TM_P_H) $(PARAMS_H) except.h gt-gcse.h
lcm.o : lcm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) \
$(BASIC_BLOCK_H) $(TM_P_H) df.h function.h
-ssa.o : ssa.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) varray.h \
- $(EXPR_H) hard-reg-set.h flags.h function.h real.h insn-config.h $(RECOG_H) \
- $(BASIC_BLOCK_H) output.h ssa.h
-ssa-dce.o : ssa-dce.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) hard-reg-set.h \
- $(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h
-ssa-ccp.o : ssa-ccp.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) hard-reg-set.h \
- $(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h \
- errors.h $(GGC_H) df.h function.h
df.o : df.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
insn-config.h $(RECOG_H) function.h $(REGS_H) alloc-pool.h hard-reg-set.h \
$(BASIC_BLOCK_H) df.h $(FIBHEAP_H)
toplev.h $(BASIC_BLOCK_H) $(COVERAGE_H) $(TREE_H) value-prof.h
value-prof.o : value-prof.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(BASIC_BLOCK_H) hard-reg-set.h value-prof.h $(EXPR_H) output.h flags.h \
- $(RECOG_H) insn-config.h $(OPTABS_H)
+ $(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H)
loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h $(LOOP_H) \
insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \
real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h cfgloop.h \
alloc-pool.o : alloc-pool.c $(CONFIG_H) $(SYSTEM_H) alloc-pool.h
flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
- $(RECOG_H) function.h except.h $(EXPR_H) ssa.h $(GGC_H) $(TM_P_H)
+ $(RECOG_H) function.h except.h $(EXPR_H) $(GGC_H) $(TM_P_H)
cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
function.h except.h $(GGC_H) $(TM_P_H) alloc-pool.h
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
resource.h $(OBSTACK_H) flags.h $(TM_P_H)
ifcvt.o : ifcvt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
- $(REGS_H) toplev.h flags.h insn-config.h function.h $(RECOG_H) target.h \
+ $(REGS_H) toplev.h flags.h insn-config.h function.h $(RECOG_H) $(TARGET_H) \
$(BASIC_BLOCK_H) $(EXPR_H) output.h except.h $(TM_P_H) real.h $(OPTABS_H) \
cfgloop.h
params.o : params.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(PARAMS_H) toplev.h
insn-config.h insn-flags.h insn-codes.h insn-constants.h \
insn-attr.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DTARGET_NAME=\"$(target_alias)\" \
+ -DTARGET_NAME=\"$(target_noncanonical)\" \
-DLOCALEDIR=\"$(localedir)\" \
-c $(filter %.c,$^) -o $@
genrtl.c genrtl.h : s-genrtl
@true # force gnu make to recheck modification times.
-s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change $(RTL_BASE_H)
+s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change
$(RUN_GEN) ./gengenrtl$(build_exeext) -h > tmp-genrtl.h
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
$(RUN_GEN) ./gengenrtl$(build_exeext) > tmp-genrtl.c
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
$(STAMP) s-genrtl
+insn-modes.o : insn-modes.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(MACHMODE_H) real.h
+min-insn-modes.c insn-modes.c insn-modes.h : s-modes ; @true
+
+s-modes: genmodes$(build_exeext) $(srcdir)/move-if-change
+ $(RUN_GEN) ./genmodes$(build_exeext) -h > tmp-modes.h
+ $(SHELL) $(srcdir)/move-if-change tmp-modes.h insn-modes.h
+ $(RUN_GEN) ./genmodes$(build_exeext) -m > tmp-min-modes.c
+ $(SHELL) $(srcdir)/move-if-change tmp-min-modes.c min-insn-modes.c
+ $(RUN_GEN) ./genmodes$(build_exeext) > tmp-modes.c
+ $(SHELL) $(srcdir)/move-if-change tmp-modes.c insn-modes.c
+ $(STAMP) s-modes
+
tm-preds.h: s-preds; @true
s-preds: genpreds$(build_exeext) $(srcdir)/move-if-change
$(host_xm_file_list) $(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) \
$(srcdir)/bitmap.h $(srcdir)/coverage.c $(srcdir)/function.h $(srcdir)/rtl.h \
$(srcdir)/optabs.h $(srcdir)/tree.h $(srcdir)/libfuncs.h $(srcdir)/hashtable.h \
- $(srcdir)/real.h $(srcdir)/varray.h $(srcdir)/ssa.h $(srcdir)/insn-addr.h \
+ $(srcdir)/real.h $(srcdir)/varray.h $(srcdir)/insn-addr.h \
$(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/cgraph.h \
$(srcdir)/c-common.h $(srcdir)/c-tree.h \
$(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \
# Object files used in those programs.
genobjs=$(genprognames:%=%.o) read-rtl.o gensupport.o genattrtab.o \
- genautomata.o gengenrtl.o genpreds.o gengtype.o \
+ genautomata.o gengenrtl.o genmodes.o genpreds.o gengtype.o \
genconstants.o gen-protos.o scan.o fix-header.o scan-decls.o \
gencheck.o dummy-conditions.o genconditions.o
$(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
gengenrtl.o $(BUILD_LIBS)
-gengenrtl.o : gengenrtl.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
- $(GTM_H) real.h
+gengenrtl.o : gengenrtl.c $(BCONFIG_H) $(SYSTEM_H) rtl.def
+
+genmodes$(build_exeext) : genmodes.o $(BUILD_ERRORS) $(BUILD_LIBDEPS)
+ $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
+ genmodes.o $(BUILD_ERRORS) $(BUILD_LIBS)
+
+genmodes.o : genmodes.c $(BCONFIG_H) $(SYSTEM_H) errors.h $(HASHTAB_H) \
+ machmode.def $(extra_modes_file)
genpreds$(build_exeext) : genpreds.o $(BUILD_LIBDEPS)
$(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
$(parsedir)/gengtype-yacc.c $(OUTPUT_OPTION)
$(parsedir)/gengtype-lex.c : $(srcdir)/gengtype-lex.l
- if $(FLEX) $(FLEXFLAGS) -o g-$$$$ $(srcdir)/gengtype-lex.l; then \
+ if $(FLEX) $(FLEXFLAGS) -og-$$$$ $(srcdir)/gengtype-lex.l; then \
mv -f g-$$$$ $(parsedir)/gengtype-lex.c ; \
else \
rm -f g-$$$$ ; \
$(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)rtl.c $(OUTPUT_OPTION)
print-rtl1.o: $(srcdir)/print-rtl.c $(BCONFIG_H) coretypes.h $(GTM_H) \
- $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H)
+ $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H)
rm -f print-rtl1.c
sed -e 's/config[.]h/bconfig.h/' $(srcdir)/print-rtl.c > print-rtl1.c
$(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) print-rtl1.c $(OUTPUT_OPTION)
sed -e 's/config[.]h/bconfig.h/' $(srcdir)/ggc-none.c > $(BUILD_PREFIX)ggc-none.c
$(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)ggc-none.c $(OUTPUT_OPTION)
+min-insn-modes.o: insn-modes.c $(BCONFIG_H) $(SYSTEM_H) $(MACHMODE_H)
+ $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
+ min-insn-modes.c $(OUTPUT_OPTION)
+
#\f
# Remake internationalization support.
intl.o: intl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) intl.h Makefile
PREPROCESSOR_DEFINES = \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_alias)\" \
+ -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_noncanonical)\" \
-DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \
-DLOCAL_INCLUDE_DIR=\"$(local_includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(CROSS_SYSTEM_HEADER_DIR)\" \
#\f
# Remake the info files.
-docdir = $(srcdir)/doc
-
stmp-docobjdir:
-test -d $(docobjdir) || mkdir $(docobjdir)
$(STAMP) stmp-docobjdir
doc: $(BUILD_INFO) $(GENERATED_MANPAGES) gccbug
-info:: $(docobjdir)/cpp.info $(docobjdir)/gcc.info $(docobjdir)/gccint.info $(docobjdir)/gccinstall.info $(docobjdir)/cppinternals.info
-
-TEXI_CPP_FILES = $(docdir)/cpp.texi $(docdir)/include/fdl.texi \
- $(docdir)/cppenv.texi $(docdir)/cppopts.texi
-
-TEXI_GCC_FILES = $(docdir)/gcc.texi $(docdir)/include/gcc-common.texi \
- $(docdir)/frontends.texi $(docdir)/standards.texi \
- $(docdir)/invoke.texi $(docdir)/extend.texi $(docdir)/md.texi \
- $(docdir)/objc.texi $(docdir)/gcov.texi $(docdir)/trouble.texi \
- $(docdir)/bugreport.texi $(docdir)/service.texi \
- $(docdir)/contribute.texi $(docdir)/compat.texi \
- $(docdir)/include/funding.texi $(docdir)/gnu.texi \
- $(docdir)/include/gpl.texi $(docdir)/include/fdl.texi \
- $(docdir)/contrib.texi $(docdir)/cppenv.texi $(docdir)/cppopts.texi
-
-TEXI_GCCINT_FILES = $(docdir)/gccint.texi \
- $(docdir)/include/gcc-common.texi $(docdir)/contribute.texi \
- $(docdir)/makefile.texi $(docdir)/configterms.texi \
- $(docdir)/portability.texi $(docdir)/interface.texi \
- $(docdir)/passes.texi $(docdir)/c-tree.texi \
- $(docdir)/rtl.texi $(docdir)/md.texi $(docdir)/tm.texi \
- $(docdir)/hostconfig.texi $(docdir)/fragments.texi \
- $(docdir)/configfiles.texi $(docdir)/collect2.texi \
- $(docdir)/headerdirs.texi $(docdir)/include/funding.texi \
- $(docdir)/gnu.texi $(docdir)/include/gpl.texi \
- $(docdir)/include/fdl.texi $(docdir)/contrib.texi \
- $(docdir)/languages.texi $(docdir)/sourcebuild.texi \
- $(docdir)/gty.texi $(docdir)/libgcc.texi
-
-TEXI_GCCINSTALL_FILES = $(docdir)/install.texi $(docdir)/install-old.texi \
- $(docdir)/include/fdl.texi
-
-TEXI_CPPINT_FILES = $(docdir)/cppinternals.texi
-
-$(docobjdir)/cpp.info cpp.dvi: $(TEXI_CPP_FILES)
-$(docobjdir)/gcc.info gcc.dvi: $(TEXI_GCC_FILES)
-$(docobjdir)/gccint.info gccint.dvi: $(TEXI_GCCINT_FILES)
-$(docobjdir)/gccinstall.info gccinstall.dvi: $(TEXI_GCCINSTALL_FILES)
-$(docobjdir)/cppinternals.info cppinternals.dvi: $(TEXI_CPPINT_FILES)
-
-$(docobjdir)/%.info: $(docdir)/%.texi stmp-docobjdir
- $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
- -o $@ $<
-
-dvi:: gcc.dvi gccint.dvi gccinstall.dvi cpp.dvi cppinternals.dvi
-
-%.dvi: $(docdir)/%.texi
- $(TEXI2DVI) -I $(docdir) -I $(docdir)/include $<
-
-gccinstall.dvi:
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(TEXI2DVI) -I $$s/doc -I $$s/doc/include -o $@ $$s/doc/install.texi
+info:: $(docobjdir)/cpp.info $(docobjdir)/gcc.info $(docobjdir)/gccint.info \
+ $(docobjdir)/gccinstall.info $(docobjdir)/cppinternals.info
+
+TEXI_CPP_FILES = cpp.texi fdl.texi cppenv.texi cppopts.texi
+
+TEXI_GCC_FILES = gcc.texi gcc-common.texi frontends.texi standards.texi \
+ invoke.texi extend.texi md.texi objc.texi gcov.texi trouble.texi \
+ bugreport.texi service.texi contribute.texi compat.texi funding.texi \
+ gnu.texi gpl.texi fdl.texi contrib.texi cppenv.texi cppopts.texi
+
+TEXI_GCCINT_FILES = gccint.texi gcc-common.texi contribute.texi makefile.texi \
+ configterms.texi portability.texi interface.texi passes.texi \
+ c-tree.texi rtl.texi md.texi tm.texi hostconfig.texi fragments.texi \
+ configfiles.texi collect2.texi headerdirs.texi funding.texi gnu.texi \
+ gpl.texi fdl.texi contrib.texi languages.texi sourcebuild.texi \
+ gty.texi libgcc.texi
+
+TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi
+
+TEXI_CPPINT_FILES = cppinternals.texi
+
+# The *.1, *.7, *.info, and *.dvi files are being generated from implicit
+# patterns. To use them, put each of the specific target with with their
+# specific dependencies but no build commands.
+
+$(docobjdir)/cpp.info: $(TEXI_CPP_FILES)
+$(docobjdir)/gcc.info: $(TEXI_GCC_FILES)
+$(docobjdir)/gccint.info: $(TEXI_GCCINT_FILES)
+$(docobjdir)/cppinternals.info: $(TEXI_CPPINT_FILES)
+
+$(docobjdir)/%.info: %.texi stmp-docobjdir
+ if [ x$(BUILD_INFO) = xinfo ]; then \
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \
+ -I $(docdir)/include -o $@ $<; \
+ fi
+
+# Duplicate entry to handle renaming of gccinstall.info
+$(docobjdir)/gccinstall.info: $(TEXI_GCCINSTALL_FILES) stmp-docobjdir
+ if [ x$(BUILD_INFO) = xinfo ]; then \
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \
+ -I $(docdir)/include -o $@ $<; \
+ fi
+
+$(docobjdir)/cpp.dvi: $(TEXI_CPP_FILES)
+$(docobjdir)/gcc.dvi: $(TEXI_GCC_FILES)
+$(docobjdir)/gccint.dvi: $(TEXI_GCCINT_FILES)
+$(docobjdir)/cppinternals.dvi: $(TEXI_CPPINT_FILES)
+
+dvi:: $(docobjdir)/gcc.dvi $(docobjdir)/gccint.dvi \
+ $(docobjdir)/gccinstall.dvi $(docobjdir)/cpp.dvi \
+ $(docobjdir)/cppinternals.dvi
+
+$(docobjdir)/%.dvi: %.texi stmp-docobjdir
+ $(TEXI2DVI) -I $(docdir) -I $(docdir)/include -o $@ $<
+
+# Duplicate entry to handle renaming of gccinstall.dvi
+$(docobjdir)/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES) stmp-docobjdir
+ $(TEXI2DVI) -I $(docdir) -I $(docdir)/include -o $@ $<
generated-manpages:: $(docobjdir)/gcov.1 $(docobjdir)/cpp.1 \
$(docobjdir)/gcc.1 $(docobjdir)/gfdl.7 $(docobjdir)/gpl.7 \
$(docobjdir)/fsf-funding.7
-$(docobjdir)/gcov.1: $(docdir)/gcov.texi
-$(docobjdir)/cpp.1: $(docdir)/cpp.texi $(docdir)/cppenv.texi \
- $(docdir)/cppopts.texi
-$(docobjdir)/gcc.1: $(docdir)/invoke.texi $(docdir)/cppenv.texi \
- $(docdir)/cppopts.texi
-$(docobjdir)/gfdl.7: $(docdir)/include/fdl.texi
-$(docobjdir)/gpl.7: $(docdir)/include/gpl.texi
-$(docobjdir)/fsf-funding.7: $(docdir)/include/funding.texi
-
-$(docobjdir)/%.1: $(docdir)/%.texi stmp-docobjdir
+$(docobjdir)/%.1: %.pod stmp-docobjdir
$(STAMP) $@
- -$(TEXI2POD) $< > $(basename $(notdir $@)).pod
- -($(POD2MAN) --section=1 \
- $(basename $(notdir $@)).pod > $(@).T$$$$ && \
+ -($(POD2MAN) --section=1 $< > $(@).T$$$$ && \
mv -f $(@).T$$$$ $@) || \
(rm -f $(@).T$$$$ && exit 1)
- -rm -f $(basename $(notdir $@)).pod
-$(docobjdir)/%.7: $(docdir)/%.texi stmp-docobjdir
+$(docobjdir)/%.7: %.pod stmp-docobjdir
$(STAMP) $@
- -$(TEXI2POD) $< > $(basename $(notdir $@)).pod
- -($(POD2MAN) --section=7 \
- $(basename $(notdir $@)).pod > $(@).T$$$$ && \
+ -($(POD2MAN) --section=7 $< > $(@).T$$$$ && \
mv -f $(@).T$$$$ $@) || \
(rm -f $(@).T$$$$ && exit 1)
- -rm -f $(basename $(notdir $@)).pod
+
+%.pod: %.texi
+ $(STAMP) $@
+ -$(TEXI2POD) $< > $@
+
+.INTERMEDIATE: cpp.pod gcc.pod gfdl.pod fsf-funding.pod
+cpp.pod: cpp.texi cppenv.texi cppopts.texi
+
+# These next rules exist because the output name is not the same as
+# the input name, so our implict %.pod rule will not work.
+
+gcc.pod: invoke.texi cppenv.texi cppopts.texi
+ $(STAMP) $@
+ -$(TEXI2POD) $< > $@
+gfdl.pod: fdl.texi
+ $(STAMP) $@
+ -$(TEXI2POD) $< > $@
+fsf-funding.pod: funding.texi
+ $(STAMP) $@
+ -$(TEXI2POD) $< > $@
#\f
# Deletion of files made during compilation.
-if [ ! -f po/exgettext ]; then rm -f po/*.gmo; fi
-rmdir ada cp f java objc fixinc intl po testsuite 2>/dev/null
-# Delete anything likely to be found in the source directory
-# that shouldn't be in the distribution.
-extraclean: distclean lang.extraclean
- -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
- -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
- -rm -f config/*/=* config/*/"#"* config/*/*~*
- -rm -f config/*/*.orig config/*/*.rej
- -rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
- -rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
- -rm -f *lose config/*lose config/*/*lose
- -rm -f *.s *.s[0-9] *.i config/ChangeLog
- -rm -f y.tab.c yacc.*
- -rm -f */=* */"#"* */*~*
- -rm -f */patch* */*.orig */*.rej
- -rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
- -rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs
- -rm -f */*lose */*.s */*.s[0-9] */*.i
-
# Get rid of every file that's generated from some other file, except for `configure'.
# Most of these files ARE PRESENT in the GCC distribution.
maintainer-clean:
# Handle cpp installation.
install-cpp: cpp$(exeext)
- -if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext); \
- if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
- else true; fi; \
- else \
- rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
- if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- else true; fi; \
- fi
+ -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
+ -$(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
+ -if [ x$(cpp_install_dir) != x ]; then \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ else true; fi
# Create the installation directories.
# $(libdir)/gcc/include isn't currently searched by cpp.
chmod a-x $(DESTDIR)$(libsubdir)/specs; \
fi
# Install protoize if it was compiled.
- -if [ -f protoize$(exeext) ]; \
- then \
- if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
- rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
- else \
- rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
- rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
- fi ; \
- rm -f $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
- $(INSTALL_DATA) SYSCALLS.c.X $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
- chmod a-x $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
+ -if [ -f protoize$(exeext) ]; then \
+ rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
+ $(INSTALL_DATA) SYSCALLS.c.X $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
+ chmod a-x $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
fi
# Install gcov if it was compiled.
-if [ -f gcov$(exeext) ]; \
fi
$(INSTALL_SCRIPT) gccbug $(DESTDIR)$(bindir)/$(GCCBUG_INSTALL_NAME)
-# Install the driver program as $(target_alias)-gcc,
-# $(target_alias)-gcc-$(version)
+# Install the driver program as $(target_noncanonical)-gcc,
+# $(target_noncanonical)-gcc-$(version)
# and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
install-driver: installdirs xgcc$(exeext)
+ -rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
+ -$(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
+ -rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-$(version)
+ -( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-$(version) )
-if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-$(version); \
- ( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_CROSS_NAME)$(exeext) $(target_alias)-gcc-$(version) ); \
if [ -d $(DESTDIR)$(gcc_tooldir)/bin/. ] ; then \
rm -f $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
$(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
else true; fi; \
else \
- rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-$(version); \
- ( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_alias)-gcc-$(version) ); \
- rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-tmp$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-tmp$(exeext); \
( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_alias)-gcc-tmp$(exeext) && \
- mv -f $(target_alias)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-tmp$(exeext) && \
+ mv -f $(target_noncanonical)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
fi
# Install the info files.
# $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
# to do the install.
-install-info: doc installdirs lang.install-info
- -rm -f $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
- -rm -f $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
- if [ -f $(docobjdir)/gcc.info ]; then \
- for f in $(docobjdir)/cpp.info* $(docobjdir)/gcc.info* \
- $(docobjdir)/cppinternals.info* $(docobjdir)/gccint.info*; do \
+install-info:: doc installdirs \
+ $(DESTDIR)$(infodir)/cpp.info \
+ $(DESTDIR)$(infodir)/gcc.info \
+ $(DESTDIR)$(infodir)/cppinternals.info \
+ $(DESTDIR)$(infodir)/gccinstall.info \
+ $(DESTDIR)$(infodir)/gccint.info
+
+$(DESTDIR)$(infodir)/%.info: $(docobjdir)/%.info installdirs
+ rm -f $@
+ if [ -f $< ]; then \
+ for f in $(<)*; do \
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$f $(DESTDIR)$(infodir)/$$realfile; \
+ chmod a-x $(DESTDIR)$(infodir)/$$realfile; \
done; \
else true; fi
-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
if [ -f $(DESTDIR)$(infodir)/dir ] ; then \
- for f in cpp.info gcc.info gccint.info cppinternals.info; do \
- if [ -f $(DESTDIR)$(infodir)/$$f ]; then \
- install-info --dir-file=$(DESTDIR)$(infodir)/dir $(DESTDIR)$(infodir)/$$f; \
- else true; fi; \
- done; \
+ if [ -f $@ ]; then \
+ install-info --dir-file=$(DESTDIR)$(infodir)/dir $@; \
+ else true; fi; \
else true; fi; \
else true; fi;
- -chmod a-x $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
- -chmod a-x $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
# Install the man pages.
install-man: installdirs $(GENERATED_MANPAGES) lang.install-man
- -if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
- $(INSTALL_DATA) $(docobjdir)/gcc.1 $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
- chmod a-x $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
- else \
- rm -f $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
- $(INSTALL_DATA) $(docobjdir)/gcc.1 $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
- chmod a-x $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
- fi
+ -rm -f $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
+ -$(INSTALL_DATA) $(docobjdir)/gcc.1 $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
+ -chmod a-x $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
-rm -f $(DESTDIR)$(man1dir)/cpp$(man1ext)
-$(INSTALL_DATA) $(docobjdir)/cpp.1 $(DESTDIR)$(man1dir)/cpp$(man1ext)
-chmod a-x $(DESTDIR)$(man1dir)/cpp$(man1ext)
-rm -rf $(DESTDIR)$(libsubdir)
-rm -rf $(DESTDIR)$(libexecsubdir)
-rm -rf $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
- -rm -rf $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext)
-rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
- -rm -f $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext)
-if [ x$(cpp_install_dir) != x ]; then \
rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
else true; fi
-rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext)
- -rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext)
-rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
- -rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext)
-rm -rf $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
-rm -rf $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
- -rm -rf $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext)
-rm -rf $(DESTDIR)$(man1dir)/cpp$(man1ext)
-rm -rf $(DESTDIR)$(man1dir)/protoize$(man1ext)
-rm -rf $(DESTDIR)$(man1dir)/unprotoize$(man1ext)
# These targets are for the dejagnu testsuites. The file site.exp
# contains global variables that all the testsuites will use.
-# Set to $(target_alias).
target_subdir = @target_subdir@
site.exp: ./config.status Makefile
@echo "set host_triplet $(host)" >> ./tmp0
@echo "set build_triplet $(build)" >> ./tmp0
@echo "set target_triplet $(target)" >> ./tmp0
- @echo "set target_alias $(target_alias)" >> ./tmp0
+ @echo "set target_alias $(target_noncanonical)" >> ./tmp0
# CFLAGS is set even though it's empty to show we reserve the right to set it.
@echo "set CFLAGS \"\"" >> ./tmp0
@echo "set CXXFLAGS \"\"" >> ./tmp0
CHECK_TARGETS = check-gcc @check_languages@
-check-c++ : check-g++
-check-f77 : check-g77
-check-java :
-
check: $(CHECK_TARGETS)
# The idea is to parallelize testing of multilibs, for example:
# will run 3 concurrent sessions of check-gcc, eventually testing
# all 10 combinations. GNU make is required, as is a shell that expands
# alternations within braces.
-check-gcc//% check-g++//% check-g77//% check-objc//%: site.exp
+lang_checks_parallel = $(lang_checks:=//%)
+$(lang_checks_parallel): site.exp
target=`echo "$@" | sed 's,//.*,,'`; \
variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
vardots=`echo "$$variant" | sed 's,/,.,g'`; \
-rm -f $@
sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)|' < site.exp > $@
-check-g++ check-gcc check-g77 check-objc: check-% : $(TESTSUITEDIR)/site.exp
+$(lang_checks): check-% : $(TESTSUITEDIR)/site.exp
-(rootme=`${PWD_COMMAND}`; export rootme; \
srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
cd $(TESTSUITEDIR); \
echo "CompilerTable.cplusplus_kind=GCC" >> $@
echo "CompilerTable.cplusplus_path=${objdir}/g++" >> $@
echo "CompilerTable.cplusplus_options=-B${objdir}/" >> $@
- echo "DejaGNUTest.target=${target_alias}" >> $@
+ echo "DejaGNUTest.target=${target_noncanonical}" >> $@
# Run the G++ testsuite using QMTest.
qmtest-g++: ${QMTEST_DIR}/context
# Update the tags table.
TAGS: lang.tags
- (cd $(srcdir); \
- incs= ; \
- list='$(SUBDIRS)'; for dir in $$list; do \
- if test -f $$dir/TAGS; then \
- incs="$$incs --include $$dir/TAGS"; \
- fi; \
- done; \
- mkdir tmp-tags; \
- mv -f c-parse.[ch] tmp-tags; \
- etags *.y *.h *.c $$incs; \
- mv tmp-tags/* .; \
- rmdir tmp-tags)
+ (cd $(srcdir); \
+ incs= ; \
+ list='$(SUBDIRS)'; for dir in $$list; do \
+ if test -f $$dir/TAGS; then \
+ incs="$$incs --include $$dir/TAGS.sub"; \
+ fi; \
+ done; \
+ mkdir tmp-tags; \
+ mv -f c-parse.[ch] tmp-tags; \
+ etags -o TAGS.sub *.y *.h *.c; \
+ mv tmp-tags/* .; \
+ rmdir tmp-tags; \
+ etags --include TAGS.sub $$incs)
# ------------------------------------------------------
# Bootstrap-related targets (not used during 'make all')
# the context of the stage_x rule.
POSTSTAGE1_FLAGS_TO_PASS = \
- ADAC="\$$(CC)" \
+ ADAFLAGS="$(BOOT_ADAFLAGS)" \
CFLAGS="$(BOOT_CFLAGS)" \
LDFLAGS="$(BOOT_LDFLAGS)" \
WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
STRICT_WARN="$(STRICT2_WARN)" \
libdir=$(libdir) \
LANGUAGES="$(LANGUAGES)" \
+ MAKEINFO="$(MAKEINFO)" \
+ MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
MAKEOVERRIDES= \
OUTPUT_OPTION="-o \$$@"
gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
-rm -f .bad_compare
case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
- for file in *$(objext); do \
- case "$@" in \
- slowcompare* ) \
- tail +16c ./$$file > tmp-foo1; \
- tail +16c stage$$stage/$$file > tmp-foo2 \
- && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
- ;; \
- fastcompare* ) \
- cmp $$file stage$$stage/$$file 16 16 > /dev/null 2>&1; \
- test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \
- ;; \
- gnucompare* ) \
- cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1; \
- test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \
- ;; \
- esac ; \
- done
- case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
- for dir in tmp-foo $(SUBDIRS); do \
+ for dir in . $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
case "$@" in \
OSDN Git Service
