+2012-02-21 Richard Earnshaw <rearnsha@arm.com>
+
+ PR target/52294
+ * thumb2.md (thumb2_shiftsi3_short): Split register and
+ immediate shifts. For register shifts tie operands 0 and 1.
+ (peephole2 for above): Check that register-controlled shifts
+ have suitably tied operands.
+
+2012-02-21 Quentin Neill <quentin.neill@amd.com>
+
+ PR target/52137
+ * config/i386/bdver1.md (bdver1_call, bdver1_push,
+ bdver1_pop, bdver1_leave, bdver1_lea, bdver1_imul_DI, bdver1_imul,
+ bdver1_imul_mem_DI, bdver1_imul_mem, bdver1_idiv, bdver1_idiv_mem,
+ bdver1_str, bdver1_idirect, bdver1_ivector, bdver1_idirect_loadmov,
+ bdver1_idirect_load, bdver1_ivector_load, bdver1_idirect_movstore,
+ bdver1_idirect_both, bdver1_ivector_both, bdver1_idirect_store,
+ bdver1_ivector_store, bdver1_fldxf, bdver1_fld, bdver1_fstxf,
+ bdver1_fst, bdver1_fist, bdver1_fmov_bdver1, bdver1_fadd_load,
+ bdver1_fadd, bdver1_fmul_load, bdver1_fmul, bdver1_fsgn,
+ bdver1_fdiv_load, bdver1_fdiv, bdver1_fpspc_load, bdver1_fpspc,
+ bdver1_fcmov_load, bdver1_fcmov, bdver1_fcomi_load,
+ bdver1_fcomi, bdver1_fcom_load, bdver1_fcom,
+ bdver1_fxch, bdver1_ssevector_avx128_unaligned_load,
+ bdver1_ssevector_avx256_unaligned_load,
+ bdver1_ssevector_sse128_unaligned_load,
+ bdver1_ssevector_avx128_load, bdver1_ssevector_avx256_load,
+ bdver1_ssevector_sse128_load, bdver1_ssescalar_movq_load,
+ bdver1_ssescalar_vmovss_load, bdver1_ssescalar_sse128_load,
+ bdver1_mmxsse_load, bdver1_sse_store_avx256, bdver1_sse_store,
+ bdver1_mmxsse_store_short, bdver1_ssevector_avx256,
+ bdver1_movss_movsd, bdver1_mmxssemov, bdver1_sselog_load_256,
+ bdver1_sselog_256, bdver1_sselog_load, bdver1_sselog,
+ bdver1_ssecmp_load, bdver1_ssecmp, bdver1_ssecomi_load,
+ bdver1_ssecomi, bdver1_vcvtX2Y_avx256_load, bdver1_vcvtX2Y_avx256,
+ bdver1_ssecvt_cvtss2sd_load, bdver1_ssecvt_cvtss2sd,
+ bdver1_sseicvt_cvtsi2sd_load, bdver1_sseicvt_cvtsi2sd,
+ bdver1_ssecvt_cvtpd2ps_load, bdver1_ssecvt_cvtpd2ps,
+ bdver1_ssecvt_cvtdq2ps_load, bdver1_ssecvt_cvtdq2ps,
+ bdver1_ssecvt_cvtdq2pd_load, bdver1_ssecvt_cvtdq2pd,
+ bdver1_ssecvt_cvtps2pd_load, bdver1_ssecvt_cvtps2pd,
+ bdver1_ssecvt_cvtsX2si_load, bdver1_ssecvt_cvtsX2si,
+ bdver1_ssecvt_cvtpd2pi_load, bdver1_ssecvt_cvtpd2pi,
+ bdver1_ssecvt_cvtpd2dq_load, bdver1_ssecvt_cvtpd2dq,
+ bdver1_ssecvt_cvtps2pi_load, bdver1_ssecvt_cvtps2pi,
+ bdver1_ssemuladd_load_256, bdver1_ssemuladd_256,
+ bdver1_ssemuladd_load, bdver1_ssemuladd, bdver1_sseimul_load,
+ bdver1_sseimul, bdver1_sseiadd_load, bdver1_sseiadd,
+ bdver1_ssediv_double_load_256, bdver1_ssediv_double_256,
+ bdver1_ssediv_single_load_256, bdver1_ssediv_single_256,
+ bdver1_ssediv_double_load, bdver1_ssediv_double,
+ bdver1_ssediv_single_load, bdver1_ssediv_single, bdver1_sseins):
+ Add "bdver2" attribute.
+
+2012-02-21 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/s390/s390.c (s390_option_override): Make -mhard-dfp the
+ default if possible and not specified otherwise.
+
+2012-02-21 Richard Guenther <rguenther@suse.de>
+
+ PR middle-end/52314
+ * gimplify.c (create_tmp_from_val): Use the main variant type
+ for the type of the temporary we create.
+
+2012-02-21 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/52324
+ * gimplify.c (gimplify_expr): When re-gimplifying expressions
+ do not gimplify a MEM_REF address operand if it is already
+ in suitable form.
+
+2012-02-21 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/s390/s390.md ("fixuns_trunc<mode>si2"): Replace
+ TARGET_HARD_FLOAT with TARGET_HARD_DFP.
+
+2012-02-21 Richard Guenther <rguenther@suse.de>
+
+ * tree-vect-stmts.c (vectorizable_load): Use pre-computed
+ nested_in_vect_loop.
+
+2012-02-21 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/52318
+ * gimple-fold.c (gimplify_and_update_call_from_tree): Add
+ vdef also to non-pure/const call stmts in the sequence.
+
+2012-02-20 David S. Miller <davem@davemloft.net>
+
+ * config/sparc/sparc.md (load_pcrel_sym<P:mode>): Explain why we
+ don't use the "rd %pc" instruction on v9 for PIC register loads.
+
+2012-02-20 Aldy Hernandez <aldyh@redhat.com>
+
+ PR middle-end/52141
+ * trans-mem.c (ipa_tm_scan_irr_block): Error out on GIMPLE_ASM's
+ in a transaction safe function.
+
+2012-02-20 Kai Tietz <ktietz@redhat.com>
+
+ PR target/52238
+ * stor-layout.c (place_field): Handle desired_align for
+ ms-bitfields, too.
+
+2012-02-20 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/52298
+ * tree-vect-stmts.c (vectorizable_store): Properly use
+ STMT_VINFO_DR_STEP instead of DR_STEP when vectorizing
+ outer loops.
+ (vectorizable_load): Likewise.
+ * tree-vect-data-refs.c (vect_analyze_data_ref_access):
+ Access DR_STEP after ensuring it is not NULL.
+
+2012-02-20 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/52286
+ * fold-const.c (fold_binary_loc): For (X & C1) | C2
+ optimization use double_int_to_tree instead of build_int_cst_wide,
+ rewrite to use double_int vars.
+
+2012-02-20 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ PR target/50166
+ * acinclude.m4 (gcc_AC_INITFINI_ARRAY): Require gcc_SUN_LD_VERSION.
+ Define _start.
+ Remove -e 0 from $gcc_cv_ld invocation.
+ Only use __GLIBC_PREREQ if defined.
+ Enable on Solaris since Solaris 8 patch.
+ (gcc_SUN_LD_VERSION): New macro.
+ * configure.ac (ld_ver) <*-*-solaris2*>: Refer to
+ gcc_SUN_LD_VERSION for version number format.
+ * configure: Regenerate.
+ * varasm.c (get_elf_initfini_array_priority_section): Set
+ SECTION_NOTYPE for non-default priority.
+ Use get_section instead of get_unnamed_section to emit
+ .init_array/.fini_array with default priority.
+
+2012-02-19 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/mips/mips.c (mips_need_mips16_rdhwr_p): New variable.
+ (mips_get_tp): Set it. Record that __mips16_rdhwr binds locally.
+ (mips_start_unique_function, mips_output_mips16_rdhwr)
+ (mips_code_end): New functions.
+ (TARGET_ASM_CODE_END): Define.
+
+2012-02-19 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/mips/mips.c (mips16_build_call_stub): Add CFI information
+ to stubs with non-sibling calls.
+
+2012-02-18 Sandra Loosemore <sandra@codesourcery.com>
+
+ * doc/invoke.texi (-fira-* options): Copy-edit.
+ (ira-* parameters): Copy-edit.
+
+2012-02-17 Sandra Loosemore <sandra@codesourcery.com>
+
+ * doc/invoke.texi: Minor copy-edits to bring into conformance with
+ GCC coding conventions.
+
+2012-02-17 Sandra Loosemore <sandra@codesourcery.com>
+
+ * doc/invoke.texi: Consistently hyphenate "big-endian"/"little-endian"
+ when used as adjectives.
+
+2012-02-16 Sandra Loosemore <sandra@codesourcery.com>
+
+ * doc/invoke.texi: Clean up "that"/"which" confusion.
+
+2012-02-17 Steven Bosscher <steven@gcc.gnu.org>
+
+ * system.h: Poison SMALL_REGISTER_CLASSES
+ * config/rl78/rl78.h: Replace SMALL_REGISTER_CLASSES with hook.
+ * config/rx/rx.h: Remove SMALL_REGISTER_CLASSES.
+
+2012-02-16 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/52285
+ * tree-tailcall.c (find_tail_calls): Ignore gimple_clobber_p stmts
+ when deciding if a call is a tail call or tail recursion.
+
+2012-02-16 Kai Tietz <ktietz@redhat.com>
+
+ * config/i386/i386.c (legitimate_pic_address_disp_p): Allow
+ interger-constant displacement for UNSPEC_PCREL.
+
+2012-02-16 Jakub Jelinek <jakub@redhat.com>
+
+ PR rtl-optimization/52208
+ * ira-costs.c (scan_one_insn): Don't decrease mem_cost
+ for MEMs with REG_EQUIV, if the MEM isn't general_operand.
+
+ PR tree-optimization/52255
+ * tree-vect-loop-manip.c (slpeel_tree_peel_loop_to_edge): If
+ loop->header has virtual PHI, but exit_e->dest doesn't, add
+ virtual PHI to exit_e->dest and adjust all uses after the loop.
+
+ PR debug/52260
+ * dwarf2out.c (copy_decls_walk): Fill in *slot before traversing
+ children with clone_tree_hash, not after it.
+
+2012-02-16 Iain Sandoe <iains@gcc.gnu.org>
+
+ * config/darwin.h (ASM_OUTPUT_LABELREF): Add user label prefix for
+ extended identifiers.
+
+2012-02-16 Jakub Jelinek <jakub@redhat.com>
+
+ PR middle-end/51929
+ * cgraphunit.c (verify_edge_corresponds_to_fndecl): If node is
+ a same_body_alias, also test whether e->callee isn't a former
+ or current clone of the decl this is a same body alias of.
+
+ PR translation/52264
+ * cgraphunit.c (verify_cgraph_node): Fix a typo.
+
+2012-02-15 Sandra Loosemore <sandra@codesourcery.com>
+
+ * doc/invoke.texi: Clean up "n-bit/byte/word" modifiers.
+
+2012-02-15 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ PR target/52199
+ * config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
+ force_reg instead of copy_to_reg for better optimization. Force
+ non-register or memory operands into a register.
+
+2012-02-15 Andrew MacLeod <amacleod@redhat.com>
+
+ * extend.texi: Reserve upper bits of memory model for future use.
+
+2012-01-15 Georg-Johann Lay <avr@gjlay.de>
+ Anatoly Sokolov <aesok@post.ru>
+ Eric Weddington <eric.weddington@atmel.com>
+
+ PR target/52261
+ * config/avr/avr-devices.c (avr_arch_types): Add avrxmega2,
+ avrxmega4, avrxmega5, avrxmega6, avrxmega7.
+ Rewrite initializers for .macro.
+ * config/avr/avr-mcus.def (AVR_MCU): Add known MCUs:
+ avrxmega2: atxmega16a4, atxmega16d4, atxmega16x1, atxmega32a4
+ atxmega32d4, atxmega32x1.
+ avrxmega4: atxmega64a3, atxmega64d3.
+ avrxmega5: atxmega64a1, atxmega64a1u.
+ avrxmega6: atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3,
+ atxmega256a3, atxmega256a3b, atxmega256a3bu, atxmega256d3.
+ avrxmega7: atxmega128a1, atxmega128a1u.
+ * config/avr/avr.h (enum avr_arch): Add: ARCH_AVRXMEGA2,
+ ARCH_AVRXMEGA4, ARCH_AVRXMEGA5, ARCH_AVRXMEGA6, ARCH_AVRXMEGA7.
+ (struct base_arch_s): Rename reserved to xmega_p.
+ Rename reserved2 to have_rampd.
+ (AVR_XMEGA): New define.
+ (AVR_HAVE_RAMPD, AVR_HAVE_RAMPX, AVR_HAVE_RAMPY): New defines.
+ (AVR_HAVE_RAMPZ): Change definition to fit xmega.
+ * config/avr/predicates.md (io_address_operand): Take into
+ account SFR offset.
+ (low_io_address_operand): Ditto.
+ (high_io_address_operand): Ditto.
+ * config/avr/avr.md (isa): Add alternatives no_xmega, xmega.
+ (enabled, movhi_sp_r): Use them.
+ * config/avr/avr-c.c (avr_cpu_cpp_builtins): Use
+ cpp_define_formatted to built-in define __AVR_ARCH__.
+ (__AVR_XMEGA__): New built-in define.
+ (__AVR_HAVE_RAMPD__): New built-in define.
+ (__AVR_HAVE_RAMPX__): New built-in define.
+ (__AVR_HAVE_RAMPY__): New built-in define.
+ (__AVR_HAVE_RAMPZ__): Change condition when to built-in define it.
+
+ * config/avr/avr.c (avr_addr_t): Add ccp, rampd, rampx, rampy.
+ (avr_option_override): Initialize them.
+ (sreg_rtx, rampd_rtx, rampx_rtx, rampy_rtx): New GTY rtx.
+ (avr_init_expanders): Initialize them. No more block several calls.
+ (emit_push_sfr): New static function.
+ (avr_prologue_setup_frame): Use it to push SREG, RAMPD/X/Y/Z as needed.
+ Handle AVR_XMEGA.
+ (expand_epilogue): Handle AVR_XMEGA. Pop RAMPD/X/Y/Z as needed.
+ (avr_print_operand): Print addreeses as symbols for
+ RAMPX, RAMPY, RAMPD, CCP.
+ (output_movhi): Handle AVR_XMEGA when writing to SP.
+ (avr_out_movhi_mr_r_xmega): New static function.
+ (out_movhi_mr_r): Forward to avr_out_movhi_mr_r_xmega for AVR_XMEGA.
+ (avr_file_start): Print symbol defines for __RAMPX__, __RAMPY__,
+ __RAMPD__, __CCP__ as needed.
+
+ * config/avr/multilib.h: Regenerate.
+ * config/avr/t-multilib: Regenerate.
+ * config/avr/avr-tables.opt: Regenerate.
+
+2012-02-15 Tobias Grosser <grosser@fim.uni-passau.de>
+
+ PR tree-optimization/50561
+ * graphite-flattening.c (lst_project_loop): Do not
+ remove old scattering dimensions after flattening.
+ (lst_do_flatten): Likewise.
+
+2012-02-15 Georg-Johann Lay <avr@gjlay.de>
+
+ * doc/extend.texi (AVR Built-in Functions): Remove doc for
+ __builtin_avr_map8, __builtin_avr_map16.
+ Document __builtin_avr_insert_bits.
+
+ * config/avr/avr.md (map_bitsqi, map_bitshi): Remove.
+ (insert_bits): New insn.
+ (adjust_len.map_bits): Rename to insert_bits.
+ (UNSPEC_MAP_BITS): Rename to UNSPEC_INSERT_BITS.
+ * avr-protos.h (avr_out_map_bits): Remove.
+ (avr_out_insert_bits, avr_has_nibble_0xf): New.
+ * config/avr/constraints.md (Cxf,C0f): New.
+ * config/avr/avr.c (avr_cpu_cpp_builtins): Remove built-in
+ defines __BUILTIN_AVR_MAP8, __BUILTIN_AVR_MAP16.
+ New built-in define __BUILTIN_AVR_INSERT_BITS.
+ * config/avr/avr.c (TARGET_FOLD_BUILTIN): New define.
+ (enum avr_builtin_id): Add AVR_BUILTIN_INSERT_BITS.
+ (avr_move_bits): Rewrite.
+ (avr_fold_builtin, avr_map_metric, avr_map_decompose): New static
+ functions.
+ (avr_map_op_t): New typedef.
+ (avr_map_op): New static variable.
+ (avr_out_insert_bits, avr_has_nibble_0xf): New functions.
+ (adjust_insn_length): Handle ADJUST_LEN_INSERT_BITS.
+ (avr_init_builtins): Add definition for __builtin_avr_insert_bits.
+ (bdesc_3arg, avr_expand_triop_builtin): New.
+ (avr_expand_builtin): Use them. And handle AVR_BUILTIN_INSERT_BITS.
+ (avr_revert_map, avr_swap_map, avr_id_map, avr_sig_map): Remove.
+ (avr_map_hamming_byte, avr_map_hamming_nonstrict): Remove.
+ (avr_map_equal_p, avr_map_sig_p): Remove.
+ (avr_out_swap_bits, avr_out_revert_bits, avr_out_map_bits): Remove.
+ (bdesc_2arg): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.
+ (adjust_insn_length): Remove handling for ADJUST_LEN_MAP_BITS.
+ (enum avr_builtin_id): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.
+ (avr_init_builtins): Remove __builtin_avr_map8, __builtin_avr_map16.
+ (avr_expand_builtin): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.
+
+2012-02-14 Bernd Schmidt <bernds@codesourcery.com>
+
+ * config/c6x/c6x.md (reserve_cycles): New attribute.
+ * config/c6x/c6x.c (c6x_sched_reorder_1): Ensure insns we predicate
+ don't reserve functional units after the branch occurs.
+
+2012-02-14 Aldy Hernandez <aldyh@redhat.com>
+
+ PR middle-end/52142
+ * ipa-inline.c (can_inline_edge_p): Do not inline tm_pure
+ functions into non-tm_pure functions.
+
+2012-02-14 Eric Botcazou <ebotcazou@adacore.com>
+
+ PR lto/52178
+ * gimple.c (iterative_hash_gimple_type): Use RECORD_OR_UNION_TYPE_P.
+ (iterative_hash_canonical_type): Likewise.
+ * tree-ssa-pre.c (fini_pre): Clean up the CFG only after purging all
+ the dead edges.
+
+2012-02-14 Bernd Schmidt <bernds@codesourcery.com>
+
+ * haifa-sched.c (prune_ready_list): Ensure that if there is a
+ sched-group insn, it either remains alone or the entire list is
+ pruned.
+
+2012-02-14 Jonathan Wakely <jwakely.gcc@gmail.com>
+
+ * doc/install.texi (Prerequisites): Fix grammar.
+ (Configuration): Likewise.
+
+2012-02-14 Jonathan Wakely <jwakely.gcc@gmail.com>
+
+ * doc/install.texi (Prerequisites): Suggest building GMP, MPFR and
+ MPC as part of GCC before describing configuring with --with-gmp etc.
+ (Installing GCC: Configuration): --with-gmp etc. aren't needed if
+ sources are present.
+
+2012-02-14 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/51950
+ * dwarf2out.c (clone_tree_hash): New function.
+ (copy_decls_walk): Use it instead of clone_tree.
+
+2012-02-14 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/52244
+ PR tree-optimization/51528
+ * tree-sra.c (analyze_access_subtree): Only create INTEGER_TYPE
+ replacements for integral types.
+
+2012-02-14 Walter Lee <walt@tilera.com>
+
+ * config.gcc: Handle tilegx and tilepro.
+ * configure.ac (gcc_cv_as_dwarf2_debug_line): Enable test for
+ tilegx and tilepro.
+ Add HAVE_AS_TLS check for tilegx and tilepro.
+ * configure: Regenerate.
+ * doc/contrib.texi: Add Mat Hostetter and self.
+ * doc/extend.texi (TILE-Gx Built-in Functions): New node.
+ Document instruction intrinsics and network accessing intrinsics.
+ (TILEPro Built-in Functions): New node. Document instruction
+ intrinsics and network accessing intrinsics.
+ * doc/install.texi (Specific, tilegx-*-linux*): Document it.
+ (Specific, tilepro-*-linux*): Likewise.
+ * doc/invoke.texi (TILE-Gx Options): New section.
+ (TILEPro Options): New section.
+ * doc/md.texi (TILE-Gx): New section.
+ (TILEPro): New section.
+ * common/config/tilegx/tilegx-common.c: New file.
+ * common/config/tilepro/tilepro-common.c: New file.
+ * config/tilegx/constraints.md: New file.
+ * config/tilegx/linux.h: New file.
+ * config/tilegx/mul-tables.c: New file.
+ * config/tilegx/predicates.md: New file.
+ * config/tilegx/sync.md: New file.
+ * config/tilegx/t-tilegx: New file.
+ * config/tilegx/tilegx-builtins.h: New file.
+ * config/tilegx/tilegx-c.c: New file.
+ * config/tilegx/tilegx-generic.md: New file.
+ * config/tilegx/tilegx-modes.def: New file.
+ * config/tilegx/tilegx-multiply.h: New file.
+ * config/tilegx/tilegx-protos.h: New file.
+ * config/tilegx/tilegx.c: New file.
+ * config/tilegx/tilegx.h: New file.
+ * config/tilegx/tilegx.md: New file.
+ * config/tilegx/tilegx.opt: New file.
+ * config/tilepro/constraints.md: New file.
+ * config/tilepro/gen-mul-tables.cc: New file.
+ * config/tilepro/linux.h: New file.
+ * config/tilepro/mul-tables.c: New file.
+ * config/tilepro/predicates.md: New file.
+ * config/tilepro/t-tilepro: New file.
+ * config/tilepro/tilepro-builtins.h: New file.
+ * config/tilepro/tilepro-c.c: New file.
+ * config/tilepro/tilepro-generic.md: New file.
+ * config/tilepro/tilepro-modes.def: New file.
+ * config/tilepro/tilepro-multiply.h: New file.
+ * config/tilepro/tilepro-protos.h: New file.
+ * config/tilepro/tilepro.c: New file.
+ * config/tilepro/tilepro.h: New file.
+ * config/tilepro/tilepro.md: New file.
+ * config/tilepro/tilepro.opt: New file.
+
+2012-02-14 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/52210
+ * tree-vect-slp.c (vect_get_and_check_slp_defs): Call
+ vect_model_simple_cost with two entry vect_def_type array instead
+ of an address of dt.
+
+2012-02-14 Richard Guenther <rguenther@suse.de>
+
+ PR lto/52178
+ * tree-streamer-in.c (lto_input_ts_field_decl_tree_pointers):
+ Do not stream DECL_QUALIFIER.
+ * tree-streamer-out.c (write_ts_field_decl_tree_pointers): Likewise.
+ * tree.c (free_lang_data_in_decl): Free DECL_QUALIFIER.
+ (find_decls_types_r): Do not walk DECL_QUALIFIER.
+
+2012-02-14 Jakub Jelinek <jakub@redhat.com>
+
+ PR c/52181
+ * c-decl.c (merge_decls): Copy DECL_USER_ALIGN bit from olddecl to
+ newdecl.
+
+2012-02-13 Jakub Jelinek <jakub@redhat.com>
+
+ PR bootstrap/52172
+ * cselib.h (cselib_subst_to_values_from_insn): New prototype.
+ * cselib.c (cselib_subst_to_values_from_insn): New function.
+ * sched-deps.c (add_insn_mem_dependence,
+ sched_analyze_1, sched_analyze_2): Use it.
+
+2012-02-13 Jan Hubicka <jh@suse.cz>
+
+ PR middle-end/52214
+ * predict.c (predict_paths_for_bb): Fix thinko in prevoius patch.
+
+2012-02-13 Eric Botcazou <ebotcazou@adacore.com>
+
+ * gcc.c (LINK_COMMAND_SPEC): Deal with -fgnu-tm.
+ (GTM_SELF_SPECS): Define if not already defined.
+ (driver_self_specs): Add GTM_SELF_SPECS.
+ * config/darwin.h (LINK_COMMAND_SPEC_A): Deal with -fgnu-tm.
+ (GTM_SELF_SPECS): Define.
+ * config/i386/cygwin.h (GTM_SELF_SPECS): Likewise.
+ * config/i386/mingw32.h (GTM_SELF_SPECS): Likewise.
+
+2012-02-13 Jakub Jelinek <jakub@redhat.com>
+
+ * cselib.c (expand_loc): Return sp, fp, hfp or cfa base reg right
+ away if seen.
+
+ * cselib.c (dump_cselib_val): Don't assume l->setting_insn is
+ non-NULL.
+
+ PR middle-end/52230
+ * omp-low.c (expand_omp_for): If a static schedule without
+ chunk size has NULL region->cont, force fd.chunk_size to be
+ integer_zero_node.
+
2012-02-13 Andrew MacLeod <amacleod@redhat.com>
PR c/52190