+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+
+
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+
+
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+
+
+
+# C support is built-in for now
+
+
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+
+
+# _LT_TAG_COMPILER
+# ----------------
+# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_ENABLE_LOCK
+# ---------------
+# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+# _LT_COMPILER_OPTION
+
+# Old name:
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+# _LT_LINKER_OPTION
+
+# Old name:
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+
+
+# LT_CMD_MAX_LEN
+#---------------
+# LT_CMD_MAX_LEN
+
+# Old name:
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+# LT_SYS_DLOPEN_SELF
+
+# Old name:
+# This is what autoupdate's m4 run will expand. It fires
+# the warning (with _au_warn_XXX), outputs it into the
+# updated configure.ac (with AC_DIAGNOSE), and then outputs
+# the replacement expansion.
+
+
+# This is an auxiliary macro that is also run when
+# autoupdate runs m4. It simply calls m4_warning, but
+# we need a wrapper so that each warning is emitted only
+# once. We break the quoting in m4_warning's argument in
+# order to expand this macro's arguments, not AU_DEFUN's.
+
+
+# Finally, this is the expansion that is picked up by
+# autoconf. It tells the user to run autoupdate, and
+# then outputs the replacement expansion. We do not care
+# about autoupdate's warning because that contains
+# information on what to do *after* running autoupdate.
+
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+# _LT_SYS_DYNAMIC_LINKER