# Autoconf M4 include file defining utility macros for complex Canadian
# cross builds.
+
+
+
+
+
####
# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
# or AC_INIT.
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libs} ${target_tools}`
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+ # This is the only build module.
+ build_modules=libiberty
+else
+ build_modules=
+fi
+
+
################################################################################
srcname="gnu development package"
is_cross_compiler=yes
fi
-# We always want to use the same name for this directory, so that dejagnu
-# can reliably find it.
-target_subdir=${target_alias}
+# Find the build and target subdirs.
+ case ${build_alias} in
+ "") build_noncanonical=${build} ;;
+ *) build_noncanonical=${build_alias} ;;
+esac
+
+ case ${host_alias} in
+ "") host_noncanonical=${build_noncanonical} ;;
+ *) host_noncanonical=${host_alias} ;;
+esac
+
+ case ${target_alias} in
+ "") target_noncanonical=${host_noncanonical} ;;
+ *) target_noncanonical=${target_alias} ;;
+esac
+
+ # Prefix 'build-' so this never conflicts with target_subdir.
+build_subdir="build-${build_noncanonical}"
+# Not really a subdirectory, but here for completeness.
+host_subdir=.
+# No prefix.
+target_subdir=${target_noncanonical}
+
if test ! -d ${target_subdir} ; then
if mkdir ${target_subdir} ; then true
fi
fi
-build_prefix=build-
-build_subdir=${build_prefix}${build_alias}
-
if test x"${build_alias}" != x"${host}" ; then
if test ! -d ${build_subdir} ; then
if mkdir ${build_subdir} ; then true
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[3456]86-*-vsta)
+ i[3456789]86-*-vsta)
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
;;
- i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+ i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
;;
- i[3456]86-*-mingw32*)
+ i[3456789]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
- i[3456]86-*-beos*)
+ i[3456789]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
i*86-*-netbsdelf*) ;;
+ arm*-*-netbsdelf*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
;;
- i[3456]86-*-coff | i[3456]86-*-elf)
+ i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[34567]86-*-freebsd*)
+ i[3456789]86-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- i[3456]86-*-linux*)
+ i[3456789]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
# not build java stuff by default.
case "${target}" in
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
- i[3456]86-*-mingw32*)
+ i[3456789]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
- i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
*) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
;;
esac
;;
esac
;;
- i[3456]86-*-pe)
+ i[3456789]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
- i[3456]86-*-sco3.2v5*)
+ i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
- i[3456]86-*-sco*)
+ i[3456789]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- i[3456]86-*-solaris2*)
+ i[3456789]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- i[3456]86-*-sysv4*)
+ i[3456789]86-*-sysv4*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- i[3456]86-*-beos*)
+ i[3456789]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- powerpc64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # not yet ported.
- noconfigdirs="$noconfigdirs target-libffi"
- ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
;;
sh-*-*)
case "${host}" in
- i[3456]86-*-vsta) ;; # don't add gprof back in
- i[3456]86-*-go32*) ;; # don't add gprof back in
- i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
+ i[3456789]86-*-vsta) ;; # don't add gprof back in
+ i[3456789]86-*-go32*) ;; # don't add gprof back in
+ i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
i370-ibm-opened*)
tentative_cc="c89"
;;
- i[3456]86-*-sysv5*)
+ i[3456789]86-*-sysv5*)
host_makefile_frag="config/mh-sysv5"
;;
- i[3456]86-*-dgux*)
+ i[3456789]86-*-dgux*)
tentative_cc="gcc -Wall -ansi -D__using_DGUX"
host_makefile_frag="config/mh-dgux386"
;;
- i[3456]86-ncr-sysv4.3*)
+ i[3456789]86-ncr-sysv4.3*)
# The MetaWare compiler will generate a copyright message unless you
# turn it off by adding the -Hnocopyr flag.
tentative_cc="cc -Hnocopyr"
;;
- i[3456]86-ncr-sysv4*)
+ i[3456789]86-ncr-sysv4*)
# for an NCR 3000 (i486/SVR4) system.
# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
# This compiler not only emits obnoxious copyright messages every time
tentative_cc="/usr/ccs/ATT/cc"
host_makefile_frag="config/mh-ncr3000"
;;
- i[3456]86-*-sco3.2v5*)
+ i[3456789]86-*-sco3.2v5*)
;;
- i[3456]86-*-sco*)
+ i[3456789]86-*-sco*)
# The native C compiler botches some simple uses of const. Unfortunately,
# it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
tentative_cc="cc -Dconst="
host_makefile_frag="config/mh-sco"
;;
- i[3456]86-*-udk*)
+ i[3456789]86-*-udk*)
host_makefile_frag="config/mh-sysv5"
;;
- i[3456]86-*-solaris2*)
+ i[3456789]86-*-solaris2*)
host_makefile_frag="config/mh-sysv4"
;;
- i[3456]86-*-msdosdjgpp*)
+ i[3456789]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- i[3456]86-*-netware*)
+ i[3456789]86-*-netware*)
target_makefile_frag="config/mt-netware"
;;
powerpc-*-netware*)
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
-tooldir='$(exec_prefix)'/${target_alias}
+tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
# Generate a default definition for YACC. This is used if the makefile can't
esac
fi
-# record if we want runtime library stuff installed in libsubdir.
-# Blank means no.
-if test -z "${enable_version_specific_runtime_libs}"; then
- enable_version_specific_runtime_libs=no
-fi
-
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
# This is the final value for target_configdirs. configdirs already
-# has its final value. It's time to create some lists of valid targets.
-
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, such that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
+# has its final value, as does build_modules. It's time to create some
+# lists of valid targets.
all_build_modules=
configure_build_modules=
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
- for module in libiberty ; do
- all_build_modules=all-build-${module}
- configure_build_modules=configure-build-${module}
- if test -z "${no_recursion}" \
- && test -f ${build_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${build_subdir}/${module}/Makefile
- fi
- done
-fi
-
-all_host_modules=
-check_host_modules=
-install_host_modules=
-configure_host_modules=
-for module in ${configdirs} ; do
- all_host_modules="${all_host_modules} all-${module}"
- check_host_modules="${check_host_modules} check-${module}"
- install_host_modules="${install_host_modules} install-${module}"
- configure_host_modules="${configure_host_modules} configure-${module}"
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
- fi
-done
-install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
-
-all_target_modules=
-check_target_modules=
-install_target_modules=
-configure_target_modules=
-for module in ${target_configdirs} ; do
- all_target_modules="${all_target_modules} all-target-${module}"
- check_target_modules="${check_target_modules} check-target-${module}"
- install_target_modules="${install_target_modules} install-target-${module}"
- configure_target_modules="${configure_target_modules} configure-target-${module}"
- if test -z "${no_recursion}" \
- && test -f ${target_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${target_subdir}/${module}/Makefile
- fi
+for module in ${build_modules} ; do
+ all_build_modules=all-build-${module}
+ configure_build_modules=configure-build-${module}
done
# Determine whether gdb needs tk/tcl or not.
esac
# Create the 'maybe dependencies'. This uses a temporary file.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
rm -f maybedep.tmp
echo '# maybedep.tmp' > maybedep.tmp
-for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
- ${install_host_modules} ${install_target_modules} \
- ${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
- ; do
- echo "maybe-${item}: ${item}" >> maybedep.tmp
+
+# Make-targets which may need maybe dependencies.
+mts="configure all install check"
+
+# Loop over modules and make-targets.
+for module in ${build_modules} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ case ${mt} in
+ install) ;; # No installing build modules.
+ *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
+ esac
+ done
+done
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${module}/Makefile; then
+ echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+ rm -f ${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
+ done
+done
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
+ done
done
maybe_dependencies=maybedep.tmp
-e 's/ -host[= ][^ ]* / /' \
-e 's/ -build[= ][^ ]* / /' \
-e 's/ -target[= ][^ ]* / /' \
- -e 's/ [^ -][^ ]* / /' \
+ -e "s/ [^' -][^ ]* / /" \
-e 's/^ *//;s/ *$//'`
# For the build-side libraries, we just need to pretend we're native,
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
-fi
-if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/c++'
- else
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir}
- fi
-else
- gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+ yes)
+ { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" --with-newlib "*)
case "$target" in
*-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
esac
# If we're not building GCC, don't discard standard headers.
fi
case "${target}-${is_cross_compiler}" in
- i[3456]86-*-linux*-no)
+ i[3456789]86-*-linux*-no)
# Here host == target, so we don't need to build gcc,
# so we don't want to discard standard headers.
FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
-
# Build module lists & subconfigure args.
-
# Host module lists & subconfigure args.
-
-
-
-
-
# Target module lists & subconfigure args.
-
-
-
-
-
# Build tools.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2705: checking for $ac_word" >&5
+echo "configure:2695: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2738: checking for $ac_word" >&5
+echo "configure:2728: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2777: checking for $ac_word" >&5
+echo "configure:2767: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2810: checking for $ac_word" >&5
+echo "configure:2800: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2849: checking for $ac_word" >&5
+echo "configure:2839: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2882: checking for $ac_word" >&5
+echo "configure:2872: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2921: checking for $ac_word" >&5
+echo "configure:2911: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2954: checking for $ac_word" >&5
+echo "configure:2944: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2993: checking for $ac_word" >&5
+echo "configure:2983: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3026: checking for $ac_word" >&5
+echo "configure:3016: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3065: checking for $ac_word" >&5
+echo "configure:3055: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3098: checking for $ac_word" >&5
+echo "configure:3088: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3137: checking for $ac_word" >&5
+echo "configure:3127: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3170: checking for $ac_word" >&5
+echo "configure:3160: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3209: checking for $ac_word" >&5
+echo "configure:3199: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3242: checking for $ac_word" >&5
+echo "configure:3232: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3281: checking for $ac_word" >&5
+echo "configure:3271: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3314: checking for $ac_word" >&5
+echo "configure:3304: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3362: checking for $ac_word" >&5
+echo "configure:3352: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3395: checking for $ac_word" >&5
+echo "configure:3385: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3434: checking for $ac_word" >&5
+echo "configure:3424: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3467: checking for $ac_word" >&5
+echo "configure:3457: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3506: checking for $ac_word" >&5
+echo "configure:3496: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3539: checking for $ac_word" >&5
+echo "configure:3529: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3578: checking for $ac_word" >&5
+echo "configure:3568: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3611: checking for $ac_word" >&5
+echo "configure:3601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3650: checking for $ac_word" >&5
+echo "configure:3640: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3683: checking for $ac_word" >&5
+echo "configure:3673: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3722: checking for $ac_word" >&5
+echo "configure:3712: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3755: checking for $ac_word" >&5
+echo "configure:3745: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3794: checking for $ac_word" >&5
+echo "configure:3784: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3827: checking for $ac_word" >&5
+echo "configure:3817: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3894: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3884: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+s%@build_subdir@%$build_subdir%g
+s%@host_subdir@%$host_subdir%g
+s%@target_subdir@%$target_subdir%g
/@maybe_dependencies@/r $maybe_dependencies
s%@maybe_dependencies@%%g
/@serialization_dependencies@/r $serialization_dependencies
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@configlinks@%$configlinks%g
-s%@enable_version_specific_runtime_libs@%$enable_version_specific_runtime_libs%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g
s%@GDB_TK@%$GDB_TK%g
s%@gxx_include_dir@%$gxx_include_dir%g
s%@libstdcxx_incdir@%$libstdcxx_incdir%g
-s%@build_subdir@%$build_subdir%g
s%@build_configargs@%$build_configargs%g
s%@configure_build_modules@%$configure_build_modules%g
s%@all_build_modules@%$all_build_modules%g
s%@host_configargs@%$host_configargs%g
s%@configdirs@%$configdirs%g
-s%@configure_host_modules@%$configure_host_modules%g
-s%@all_host_modules@%$all_host_modules%g
-s%@check_host_modules@%$check_host_modules%g
-s%@install_host_modules@%$install_host_modules%g
-s%@install_host_modules_nogcc@%$install_host_modules_nogcc%g
-s%@target_subdir@%$target_subdir%g
s%@target_configargs@%$target_configargs%g
s%@target_configdirs@%$target_configdirs%g
-s%@configure_target_modules@%$configure_target_modules%g
-s%@all_target_modules@%$all_target_modules%g
-s%@check_target_modules@%$check_target_modules%g
-s%@install_target_modules@%$install_target_modules%g
s%@BISON@%$BISON%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@LEX@%$LEX%g
OSDN Git Service
