ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
+ --enable-libssp Builds libssp directory"
+ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
ac_help="$ac_help
- --enable-bootstrap[=lean] Enable bootstrapping [no]"
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build"
+ac_help="$ac_help
+ --enable-bootstrap Enable bootstrapping [yes if native build]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:595: checking host system type" >&5
+echo "configure:600: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:616: checking target system type" >&5
+echo "configure:621: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:634: checking build system type" >&5
+echo "configure:639: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:689: checking for a BSD compatible install" >&5
+echo "configure:694: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:742: checking whether ln works" >&5
+echo "configure:747: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:766: checking whether ln -s works" >&5
+echo "configure:771: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-
-if test "${with_gcc_version_trigger+set}" = set; then
- gcc_version_trigger=$with_gcc_version_trigger
-else
- gcc_version_trigger=$topsrcdir/gcc/version.c
-fi
-if test -f "${gcc_version_trigger}"; then
- gcc_version_full=`grep version_string "${gcc_version_trigger}" | sed -e 's/.*"\([^"]*\)".*/\1/'`
-else
- gcc_version_full=`$CC -v 2>&1 | sed -n 's/^gcc version //p'`
-fi
-gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
-
-
-
-
-if test -f $gcc_version_trigger ; then
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
-else
- gcc_version_trigger=
-fi
-
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
+ target-libssp \
target-libgfortran \
${libgcj} \
target-libobjc \
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
configdirs="$configdirs libtermcap" ;;
esac
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
powerpc-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
- *-*-darwin*)
- noconfigdirs="$noconfigdirs tk itcl libgui"
- ;;
esac
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
+ noconfigdirs="$noconfigdirs gnattools"
+fi
+
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi
+
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ ;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ ;;
+ m32c-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
+ arm*-*-linux-gnueabi)
+ noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ noconfigdirs="$noconfigdirs target-libjava target-libobjc"
+ ;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
+ if test x${is_cross_compiler} != xno ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
- cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-aout)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ *-*-elf)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
+ *)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ esac
;;
crx-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages fortran java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ mt-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-*)
+ sh-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
use_gnu_ld=no
fi
;;
+ sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
powerpc-*-darwin*)
host_makefile_frag="config/mh-ppc-darwin"
;;
+ powerpc-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
+ rs6000-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1801: checking for $ac_word" >&5
+echo "configure:1831: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1831: checking for $ac_word" >&5
+echo "configure:1861: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1882: checking for $ac_word" >&5
+echo "configure:1912: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1914: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1944: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1925 "configure"
+#line 1955 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1956: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1986: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1961: checking whether we are using GNU C" >&5
+echo "configure:1991: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1989: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2019: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2056: checking for $ac_word" >&5
+echo "configure:2086: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2088: checking for $ac_word" >&5
+echo "configure:2118: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2121: checking whether compiler driver understands Ada" >&5
+echo "configure:2151: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
if test x"$errors" = x && test -f conftest.$ac_objext; then
acx_cv_cc_gcc_supports_ada=yes
- break
fi
rm -f conftest.*
fi
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2154: checking how to compare bootstrapped objects" >&5
+echo "configure:2183: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$with_mpfr_dir" != x; then
- gmpinc="-I$with_mpfr_dir/mpfr"
+ gmpinc="-I$with_mpfr_dir"
gmplibs="$with_mpfr_dir/libmpfr.a"
else
gmplibs="-lmpfr"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2252: checking for correct version of gmp.h" >&5
+echo "configure:2281: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2254 "configure"
+#line 2283 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2265: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2294: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2278: checking for MPFR" >&5
+echo "configure:2307: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2283 "configure"
+#line 2312 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
add_this_lang=no
;;
esac
-
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
case $add_this_lang in
no)
# Remove language-dependent dirs.
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
{ echo "configure: error:
-The following requested languages were not found: ${missing_languages}
-The available languages are: ${potential_languages}" 1>&2; exit 1; }
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" 1>&2; exit 1; }
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
copy_dirs=
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
+
+
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine. These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-for ac_prog in bison
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2778: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_BISON"; then
- ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_BISON="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
-if test -n "$CONFIGURED_BISON"; then
- echo "$ac_t""$CONFIGURED_BISON" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_BISON" && break
-done
-test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
-
-for ac_prog in 'bison -y' byacc yacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2813: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_YACC"; then
- ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_YACC="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
-if test -n "$CONFIGURED_YACC"; then
- echo "$ac_t""$CONFIGURED_YACC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_YACC" && break
-done
-test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
-
-for ac_prog in gm4 gnum4 m4
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2848: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_M4"; then
- ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_M4="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
-if test -n "$CONFIGURED_M4"; then
- echo "$ac_t""$CONFIGURED_M4" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_M4" && break
-done
-test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
-
-for ac_prog in flex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2883: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_FLEX"; then
- ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
-if test -n "$CONFIGURED_FLEX"; then
- echo "$ac_t""$CONFIGURED_FLEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_FLEX" && break
-done
-test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
-
-for ac_prog in flex lex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2918: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_LEX"; then
- ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
-if test -n "$CONFIGURED_LEX"; then
- echo "$ac_t""$CONFIGURED_LEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_LEX" && break
-done
-test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
-
-for ac_prog in makeinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2953: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_MAKEINFO"; then
- ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
-if test -n "$CONFIGURED_MAKEINFO"; then
- echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_MAKEINFO" && break
-done
-test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
-
-
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
;;
esac
-# If no --enable-shared nor --disable-shared is specified, we set up
-# LD_LIBRARY_PATH when we build for gcc.
-case $enable_shared in
-"")
- if test -d ${srcdir}/gcc; then
- set_lib_path=yes
- else
- set_lib_path=no
- fi
- ;;
-*)
- set_lib_path=$enable_shared
- ;;
-esac
-
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${set_lib_path}" in
- no) SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
-
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
fi
;;
esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
# Strip out unwanted targets.
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
- # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
- # This will become 'yes'
- enable_bootstrap=no ;;
+ enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes | yes:$build:$build:lean)
+ yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
- yes:*:*:yes | yes:*:*:lean)
+ yes:*:*:yes)
echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes | no:*:*:lean)
+ no:*:*:yes)
{ echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
# Fail if wrong command line
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
- bootstrap_lean='#'
- default_target=bootstrap
- bootstrap_suffix=bootstrap ;;
- lean)
- bootstrap_lean=''
- default_target=bootstrap
bootstrap_suffix=bootstrap ;;
no)
- default_target=all
bootstrap_suffix=no-bootstrap ;;
esac
-
-
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
fi
extrasub="$extrasub
/^@if $module\$/d
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
-# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
-
-# provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
- yes)
- { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
FLAGS_FOR_TARGET=
case " $target_configdirs " in
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
-else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
-fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
-else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
-fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/'
-elif test "$host" = "$target"; then
- GFORTRAN_FOR_TARGET='gfortran'
-else
- GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
-fi
-case $GFORTRAN_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
-
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
- fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
-
-# Makefile fragments.
-for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
-do
- eval fragval=\$$frag
- if test $fragval != /dev/null; then
- eval $frag=${srcdir}/$fragval
- fi
-done
+# Makefile fragments.
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
-
# Build module lists & subconfigure args.
-# Host tools.
-ncn_tool_prefix=
-test -n "$host_alias" && ncn_tool_prefix=$host_alias-
-ncn_target_tool_prefix=
-test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ar; ac_word=$2
+for ac_prog in 'bison -y' byacc yacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3316: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR="${ncn_tool_prefix}ar"
+ ac_cv_prog_YACC="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
- echo "$ac_t""$AR" 1>&6
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AR" ; then
- if test $build = $host ; then
- ncn_cv_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3633: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
+echo "configure:3356: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AR"; then
- ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR="ar"
+ ac_cv_prog_BISON="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
fi
fi
-ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
-if test -n "$ncn_cv_AR"; then
- echo "$ac_t""$ncn_cv_AR" 1>&6
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+ echo "$ac_t""$BISON" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- AR=$ncn_cv_AR
- else
- AR="${ncn_tool_prefix}ar"
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}as; ac_word=$2
+test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+for ac_prog in gm4 gnum4 m4
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3672: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:3395: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$M4"; then
+ ac_cv_prog_M4="$M4" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ncn_tool_prefix}as"
+ ac_cv_prog_M4="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+M4="$ac_cv_prog_M4"
+if test -n "$M4"; then
+ echo "$ac_t""$M4" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AS" ; then
- if test $build = $host ; then
- ncn_cv_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3705: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
+echo "configure:3434: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AS"; then
- ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS="as"
+ ac_cv_prog_LEX="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
fi
fi
-ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
-if test -n "$ncn_cv_AS"; then
- echo "$ac_t""$ncn_cv_AS" 1>&6
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- AS=$ncn_cv_AS
- else
- AS="${ncn_tool_prefix}as"
- fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3474: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FLEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+ echo "$ac_t""$FLEX" 1>&6
else
- AS="$ac_cv_prog_AS"
+ echo "$ac_t""no" 1>&6
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
+test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3744: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:3513: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
+ ac_cv_prog_MAKEINFO="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_DLLTOOL" ; then
- if test $build = $host ; then
- ncn_cv_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+
+ # For an installed makeinfo, we require it to be from texinfo 4.2 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+for ac_prog in expect
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3777: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
+echo "configure:3566: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_DLLTOOL"; then
- ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
+ if test -n "$EXPECT"; then
+ ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+ ac_cv_prog_EXPECT="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
fi
fi
-ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
-if test -n "$ncn_cv_DLLTOOL"; then
- echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+EXPECT="$ac_cv_prog_EXPECT"
+if test -n "$EXPECT"; then
+ echo "$ac_t""$EXPECT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- DLLTOOL=$ncn_cv_DLLTOOL
- else
- DLLTOOL="${ncn_tool_prefix}dlltool"
- fi
+
+test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+
+for ac_prog in runtest
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3607: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RUNTEST"; then
+ ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RUNTEST="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RUNTEST="$ac_cv_prog_RUNTEST"
+if test -n "$RUNTEST"; then
+ echo "$ac_t""$RUNTEST" 1>&6
else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
+ echo "$ac_t""no" 1>&6
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ld; ac_word=$2
+test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3816: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+echo "configure:3655: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD="${ncn_tool_prefix}ld"
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-LD="$ac_cv_prog_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_LD" ; then
- if test $build = $host ; then
- ncn_cv_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3849: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
+echo "configure:3686: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_LD"; then
- ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD="ld"
+ ac_cv_prog_AR="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
fi
fi
-ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
-if test -n "$ncn_cv_LD"; then
- echo "$ac_t""$ncn_cv_LD" 1>&6
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD=$ncn_cv_LD
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
else
- LD="${ncn_tool_prefix}ld"
+ AR="${ncn_tool_prefix}$2"
fi
-else
- LD="$ac_cv_prog_LD"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}nm; ac_word=$2
+ for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3888: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+echo "configure:3730: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM="${ncn_tool_prefix}nm"
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-NM="$ac_cv_prog_NM"
-if test -n "$NM"; then
- echo "$ac_t""$NM" 1>&6
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_NM" ; then
- if test $build = $host ; then
- ncn_cv_NM=$NM
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3921: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
+echo "configure:3761: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_NM"; then
- ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM="nm"
+ ac_cv_prog_AS="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
fi
fi
-ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
-if test -n "$ncn_cv_NM"; then
- echo "$ac_t""$ncn_cv_NM" 1>&6
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM=$ncn_cv_NM
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
else
- NM="${ncn_tool_prefix}nm"
+ AS="${ncn_tool_prefix}$2"
fi
-else
- NM="$ac_cv_prog_NM"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3960: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+echo "configure:3805: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3836: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
+ else
+ DLLTOOL="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3880: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3911: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
+
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
+ else
+ LD="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in lipo; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3955: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+ echo "$ac_t""$LIPO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3986: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+ echo "$ac_t""$LIPO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LIPO" && break
+done
+
+if test -z "$ac_cv_prog_LIPO" ; then
+ set dummy lipo
+ if test $build = $host ; then
+ LIPO="$2"
+ else
+ LIPO="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in nm; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4030: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_NM" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4061: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM" && break
+done
+
+if test -z "$ac_cv_prog_NM" ; then
+ set dummy nm
+ if test $build = $host ; then
+ NM="$2"
+ else
+ NM="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4105: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4136: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_RANLIB" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB" ; then
+ RANLIB=":"
+fi
+
+ for ncn_progname in strip; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4175: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4206: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_STRIP" && break
+done
+
+if test -z "$ac_cv_prog_STRIP" ; then
+ STRIP=":"
+fi
+
+ for ncn_progname in windres; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4245: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4276: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_WINDRES" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES" ; then
+ set dummy windres
+ if test $build = $host ; then
+ WINDRES="$2"
+ else
+ WINDRES="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4320: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4351: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_OBJCOPY" && break
+done
+
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ set dummy objcopy
+ if test $build = $host ; then
+ OBJCOPY="$2"
+ else
+ OBJCOPY="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in objdump; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4395: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJDUMP="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4426: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJDUMP="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_OBJDUMP" && break
+done
+
+if test -z "$ac_cv_prog_OBJDUMP" ; then
+ set dummy objdump
+ if test $build = $host ; then
+ OBJDUMP="$2"
+ else
+ OBJDUMP="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+
+
+
+
+# Target tools.
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4477: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4508: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
+ else
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4552: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4583: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4627: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4658: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
+ if test $build = $target ; then
+ CC_FOR_TARGET="$2"
+ else
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4702: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4733: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
+ if test $build = $target ; then
+ CXX_FOR_TARGET="$2"
+ else
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4777: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_RANLIB" ; then
- if test $build = $host ; then
- ncn_cv_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3993: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
+echo "configure:4808: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_RANLIB"; then
- ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB="ranlib"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
fi
fi
-ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
-if test -n "$ncn_cv_RANLIB"; then
- echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB=$ncn_cv_RANLIB
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
+ if test $build = $target ; then
+ DLLTOOL_FOR_TARGET="$2"
else
- RANLIB=":"
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}windres; ac_word=$2
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4032: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+echo "configure:4852: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$WINDRES"; then
- ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-WINDRES="$ac_cv_prog_WINDRES"
-if test -n "$WINDRES"; then
- echo "$ac_t""$WINDRES" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_WINDRES" ; then
- if test $build = $host ; then
- ncn_cv_WINDRES=$WINDRES
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4065: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
+echo "configure:4883: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_WINDRES"; then
- ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES="windres"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
fi
fi
-ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
-if test -n "$ncn_cv_WINDRES"; then
- echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES=$ncn_cv_WINDRES
- else
- WINDRES="${ncn_tool_prefix}windres"
fi
-else
- WINDRES="$ac_cv_prog_WINDRES"
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4104: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+echo "configure:4922: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-OBJCOPY="$ac_cv_prog_OBJCOPY"
-if test -n "$OBJCOPY"; then
- echo "$ac_t""$OBJCOPY" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJCOPY" ; then
- if test $build = $host ; then
- ncn_cv_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4137: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
+echo "configure:4953: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJCOPY"; then
- ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
fi
fi
-ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
-if test -n "$ncn_cv_OBJCOPY"; then
- echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJCOPY=$ncn_cv_OBJCOPY
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
+ if test $build = $target ; then
+ GCJ_FOR_TARGET="$2"
else
- OBJCOPY="${ncn_tool_prefix}objcopy"
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objdump; ac_word=$2
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4176: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+echo "configure:4997: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
- echo "$ac_t""$OBJDUMP" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJDUMP" ; then
- if test $build = $host ; then
- ncn_cv_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4209: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
+echo "configure:5028: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJDUMP"; then
- ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
fi
fi
-ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
-if test -n "$ncn_cv_OBJDUMP"; then
- echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJDUMP=$ncn_cv_OBJDUMP
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
else
- OBJDUMP="${ncn_tool_prefix}objdump"
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
-
-
-
-
-
-
-# Target tools.
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4255: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5072: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
-if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4288: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5103: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
fi
fi
-ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ set dummy ld
+ if test $build = $target ; then
+ LD_FOR_TARGET="$2"
else
- CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}as; ac_word=$2
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4327: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5147: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
-if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6
+LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4360: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5178: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
fi
fi
-ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6
+LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
+ set dummy lipo
+ if test $build = $target ; then
+ LIPO_FOR_TARGET="$2"
else
- CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4399: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5222: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4432: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5253: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
else
- CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
+ for ncn_progname in objdump; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4471: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5297: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
-if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6
+OBJDUMP_FOR_TARGET="$ac_cv_prog_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4504: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5328: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
+ ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
fi
fi
-ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6
+OBJDUMP_FOR_TARGET="$ac_cv_prog_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
+ set dummy objdump
+ if test $build = $target ; then
+ OBJDUMP_FOR_TARGET="$2"
else
- CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4543: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5372: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
-if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4576: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5403: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
fi
fi
-ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET
- else
- CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
fi
-else
- CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ RANLIB_FOR_TARGET=":"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4615: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5442: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+STRIP_FOR_TARGET="$ac_cv_prog_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4648: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5473: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+STRIP_FOR_TARGET="$ac_cv_prog_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
+ set dummy strip
+ if test $build = $target ; then
+ STRIP_FOR_TARGET="$2"
else
- CONFIGURED_RANLIB_FOR_TARGET=":"
+ STRIP_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4687: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5517: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4720: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5548: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ set dummy windres
+ if test $build = $target ; then
+ WINDRES_FOR_TARGET="$2"
else
- CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
fi
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
-
-
-
-
-
-
-
-
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
- # In this case, the newly built tools can and should be used,
- # so we override the results of the autoconf tests.
- # This should really only happen when the tools are actually being built,
- # but that's a further refinement. The new build scheme, where
- # tools are built into a structure paralleling where they're installed,
- # should also eliminate all of this cleanly.
- AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
- LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
- NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
+echo "configure:5591: checking where to find the target ar" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
else
- # Just use the ones we found.
- AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
- LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
- NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AR_FOR_TARGET='$(AR)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
+echo "configure:5616: checking where to find the target as" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gas "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AS_FOR_TARGET='$(AS)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
+echo "configure:5641: checking where to find the target cc" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CC_FOR_TARGET='$(CC)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
+echo "configure:5666: checking where to find the target c++" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CXX_FOR_TARGET='$(CXX)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
+echo "configure:5694: checking where to find the target c++ for libstdc++" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ RAW_CXX_FOR_TARGET='$(CXX)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
+echo "configure:5722: checking where to find the target dlltool" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ DLLTOOL_FOR_TARGET='$(DLLTOOL)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
+echo "configure:5747: checking where to find the target gcc" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCC_FOR_TARGET='$()'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
+echo "configure:5772: checking where to find the target gcj" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,java,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCJ_FOR_TARGET='$(GCJ)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
+echo "configure:5800: checking where to find the target gfortran" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,fortran,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GFORTRAN_FOR_TARGET='$(GFORTRAN)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
+echo "configure:5828: checking where to find the target ld" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" ld "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ LD_FOR_TARGET='$(LD)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
+echo "configure:5853: checking where to find the target lipo" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ if test "x$target" = "x$host"; then
+ # We can use an host tool
+ LIPO_FOR_TARGET='$(LIPO)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
+echo "configure:5868: checking where to find the target nm" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ NM_FOR_TARGET='$(NM)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
+echo "configure:5893: checking where to find the target objdump" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJDUMP_FOR_TARGET='$(OBJDUMP)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
+echo "configure:5918: checking where to find the target ranlib" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ RANLIB_FOR_TARGET='$(RANLIB)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
+echo "configure:5943: checking where to find the target strip" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ STRIP_FOR_TARGET='$(STRIP)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
+echo "configure:5968: checking where to find the target windres" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ WINDRES_FOR_TARGET='$(WINDRES)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
fi
-
-
-
-
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+ case " $configdirs " in
+ *" gcc "*)
+ COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+ COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+ COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+ ;;
+ esac
+fi
+
+
+
+
+
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4805: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6021: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
esac
-# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
-# possible, however, we can resort to mv.
-echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4852: checking if symbolic links between directories work" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "${LN_S}" = "ln -s" \
- && mkdir confdir.s1 \
- && ln -s confdir.s1 confdir.s2 \
- && echo timestamp1 > confdir.s1/conftest.1 \
- && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
- && echo timestamp2 > confdir.s2/conftest.2 \
- && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
- && rm -f confdir.s2; then
- gcc_cv_prog_ln_s_dir=yes
-else
- gcc_cv_prog_ln_s_dir=yes
-fi
-rm -rf confdir.s1 confdir.s2
-fi
-
-echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
-
-case ${gcc_cv_prog_ln_s_dir} in
- yes)
- CREATE_LINK_TO_DIR='ln -s $$1 $$2'
- UNDO_LINK_TO_DIR='rm -f $$1' ;;
- *)
- CREATE_LINK_TO_DIR='mv $$1 $$2'
- UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
-esac
-
-
-
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
# Check whether --enable-werror or --disable-werror was given.
esac
-# If gcc is built natively with shared library enabled, set
-# $RPATH_ENVVAR to make sure the newly built gcc shared librares are
-# used.
-SET_GCC_LIB_PATH=
-if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
- case "${set_lib_path}" in
- no) ;;
- *)
- eval "d=\$$RPATH_ENVVAR"
- if test x"$d" != x; then
- d="$pwd/gcc:$d"
- else
- d="$pwd/gcc"
- fi
- SET_GCC_LIB_PATH="\$(RPATH_ENVVAR)=$d; export \$(RPATH_ENVVAR);"
- ;;
- esac
-fi
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
-s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@gcc_version_full@%$gcc_version_full%g
-s%@gcc_version@%$gcc_version%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@target_subdir@%$target_subdir%g
s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
-s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
-s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
-s%@CONFIGURED_M4@%$CONFIGURED_M4%g
-s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
-s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
-s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
-s%@bootstrap_lean@%$bootstrap_lean%g
-s%@default_target@%$default_target%g
+s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
/@host_makefile_frag@/r $host_makefile_frag
s%@alphaieee_frag@%%g
/@ospace_frag@/r $ospace_frag
s%@ospace_frag@%%g
-s%@SET_LIB_PATH@%$SET_LIB_PATH%g
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@tooldir@%$tooldir%g
s%@build_tooldir@%$build_tooldir%g
+s%@CONFIGURE_GDB_TK@%$CONFIGURE_GDB_TK%g
s%@GDB_TK@%$GDB_TK%g
-s%@gxx_include_dir@%$gxx_include_dir%g
-s%@libstdcxx_incdir@%$libstdcxx_incdir%g
+s%@INSTALL_GDB_TK@%$INSTALL_GDB_TK%g
s%@build_configargs@%$build_configargs%g
s%@build_configdirs@%$build_configdirs%g
s%@host_configargs@%$host_configargs%g
s%@target_configdirs@%$target_configdirs%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@config_shell@%$config_shell%g
+s%@YACC@%$YACC%g
+s%@BISON@%$BISON%g
+s%@M4@%$M4%g
+s%@LEX@%$LEX%g
+s%@FLEX@%$FLEX%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@EXPECT@%$EXPECT%g
+s%@RUNTEST@%$RUNTEST%g
s%@AR@%$AR%g
-s%@ncn_cv_AR@%$ncn_cv_AR%g
s%@AS@%$AS%g
-s%@ncn_cv_AS@%$ncn_cv_AS%g
s%@DLLTOOL@%$DLLTOOL%g
-s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
s%@LD@%$LD%g
-s%@ncn_cv_LD@%$ncn_cv_LD%g
+s%@LIPO@%$LIPO%g
s%@NM@%$NM%g
-s%@ncn_cv_NM@%$ncn_cv_NM%g
s%@RANLIB@%$RANLIB%g
-s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
+s%@STRIP@%$STRIP%g
s%@WINDRES@%$WINDRES%g
-s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
s%@OBJCOPY@%$OBJCOPY%g
-s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
s%@OBJDUMP@%$OBJDUMP%g
-s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g
-s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g
-s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g
-s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g
-s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g
-s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g
-s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
-s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
-s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
-s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
-s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
-s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
-s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
-s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
+s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
+s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
+s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
+s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@OBJDUMP_FOR_TARGET@%$OBJDUMP_FOR_TARGET%g
s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
+s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
+s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
+s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
+s%@COMPILER_AS_FOR_TARGET@%$COMPILER_AS_FOR_TARGET%g
+s%@COMPILER_LD_FOR_TARGET@%$COMPILER_LD_FOR_TARGET%g
+s%@COMPILER_NM_FOR_TARGET@%$COMPILER_NM_FOR_TARGET%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@stage1_cflags@%$stage1_cflags%g
-s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
-s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
-s%@SET_GCC_LIB_PATH@%$SET_GCC_LIB_PATH%g
CEOF
EOF
OSDN Git Service
