ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --with-build-libsubdir=[DIR] Directory where to find libraries for build system"
+ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
--enable-libssp Builds libssp directory"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:612: checking host system type" >&5
+echo "configure:614: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:633: checking target system type" >&5
+echo "configure:635: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:651: checking build system type" >&5
+echo "configure:653: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:706: checking for a BSD compatible install" >&5
+echo "configure:708: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:759: checking whether ln works" >&5
+echo "configure:761: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:783: checking whether ln -s works" >&5
+echo "configure:785: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) target_noncanonical=${target_alias} ;;
esac
- # Prefix 'build-' so this never conflicts with target_subdir.
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
+# Check whether --with-build-libsubdir or --without-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then
+ withval="$with_build_libsubdir"
+ build_libsubdir="$withval"
+else
+ build_libsubdir="$build_subdir"
+fi
+
# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
if ( test $srcdir = . && test -d gcc ) \
|| test -d $srcdir/../host-${host_noncanonical}; then
fi
# No prefix.
target_subdir=${target_noncanonical}
-
+
# Skipdirs are removed silently.
skipdirs=
;;
i[3456789]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+ noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
i[3456789]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb"
# 'target-newlib' will appear in skipdirs.
;;
i[3456789]86-*-mingw32*)
- target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-
- # Can't build gdb for mingw32 if not native.
- case "${host}" in
- i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
- ;;
- esac
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
- if test -d "$srcdir/winsup"; then
+ if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
elif test -d "$srcdir/newlib"; then
- echo "Warning: winsup is missing so newlib can't be built."
+ echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
-
- # Can't build gdb for Cygwin if not native.
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
- ;;
- esac
;;
i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
# <oldham@codesourcery.com>
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
- ;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- ;;
mips64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
#include "gmp.h"
int main() {
-#if __GNU_MP_VERSION < 3
+#if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
choke me
#endif
rm -f conftest*
if test x"$have_gmp" = xyes; then
- echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2326: checking for MPFR" >&5
-
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
+ echo $ac_n "checking for correct version of mpfr.h""... $ac_c" 1>&6
+echo "configure:2328: checking for correct version of mpfr.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2331 "configure"
+#line 2330 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
int main() {
-mpfr_t n; mpfr_init(n);
+
+#if MPFR_VERSION_MAJOR < 2 || (MPFR_VERSION_MAJOR == 2 && MPFR_VERSION_MINOR < 2)
+ choke me
+#endif
+ mpfr_t n; mpfr_init(n);
+
; return 0; }
EOF
-if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
CFLAGS="$saved_CFLAGS"
+if test x$have_gmp != xyes; then
+ { echo "configure: error: Building GCC requires GMP 4.1+ and MPFR 2.2+. Try the --with-gmp and/or --with-mpfr options." 1>&2; exit 1; }
+fi
+
# Flags needed for both GMP and/or MPFR
subdir_requires=
boot_language=
build_by_default=
- need_gmp=
. ${lang_frag}
potential_languages="${potential_languages},${language}"
# This is quite sensitive to the ordering of the case statement arms.
esac
done
- # Disable languages that need GMP if it isn't available.
- case ,${enable_languages},:${have_gmp}:${need_gmp} in
- *,${language},*:no:yes)
- # Specifically requested language; tell them.
- { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
- ;;
- *:no:yes)
- # Silently disable.
- add_this_lang=no
- ;;
- esac
-
# Disable a language that is unsupported by the target.
case " $unsupported_languages " in
*" $language "*)
esac
;;
esac
+case "$target" in
+*-mingw*)
+ # Can't be handled as Cygwin above since Mingw does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+esac
# Allow the user to override the flags for
# our build compiler if desired.
case " $configdirs " in
*" dejagnu "*)
- test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
;;
esac
# Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
CFLAGS="$CFLAGS -fkeep-inline-functions"
echo $ac_n "checking whether -fkeep-inline-functions is supported""... $ac_c" 1>&6
-echo "configure:3894: checking whether -fkeep-inline-functions is supported" >&5
+echo "configure:7268: checking whether -fkeep-inline-functions is supported" >&5
cat > conftest.$ac_ext <<EOF
-#line 3896 "configure"
+#line 7270 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
else
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+s%@build_libsubdir@%$build_libsubdir%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@target_subdir@%$target_subdir%g