--with-build-sysroot=sysroot
use sysroot as the system root during the build"
ac_help="$ac_help
- --enable-bootstrap[=lean] Enable bootstrapping [no]"
+ --enable-bootstrap Enable bootstrapping [yes if native build]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
sub-packages for the host, target or build
machine, or all sub-packages"
ac_help="$ac_help
+ --with-build-time-tools=path
+ use given path to find target tools during the build"
+ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:600: checking host system type" >&5
+echo "configure:603: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:621: checking target system type" >&5
+echo "configure:624: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:639: checking build system type" >&5
+echo "configure:642: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:694: checking for a BSD compatible install" >&5
+echo "configure:697: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:747: checking whether ln works" >&5
+echo "configure:750: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:771: checking whether ln -s works" >&5
+echo "configure:774: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
target-libgfortran \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgomp"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
;;
"")
case "${target}" in
- *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
# Enable libmudflap by default in GNU and friends.
;;
*-*-freebsd*)
esac
esac
+# Allow --disable-libgomp to exclude target-libgomp
+case $enable_libgomp in
+yes)
+ ;;
+no)
+ noconfigdirs="$noconfigdirs target-libgomp"
+ ;;
+"")
+ # Enable libgomp by default on hosted POSIX systems.
+ case "${target}" in
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ ;;
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ ;;
+ *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
+ ;;
+ *-*-darwin*)
+ ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libgomp"
+ ;;
+ esac
+esac
+
case "${target}" in
*-*-chorusos)
powerpc-*-darwin*)
host_makefile_frag="config/mh-ppc-darwin"
;;
+ powerpc-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
+ rs6000-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1825: checking for $ac_word" >&5
+echo "configure:1859: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1855: checking for $ac_word" >&5
+echo "configure:1889: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1906: checking for $ac_word" >&5
+echo "configure:1940: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1972: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1949 "configure"
+#line 1983 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1980: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2014: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1985: checking whether we are using GNU C" >&5
+echo "configure:2019: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2013: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2047: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2080: checking for $ac_word" >&5
+echo "configure:2114: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2112: checking for $ac_word" >&5
+echo "configure:2146: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2145: checking whether compiler driver understands Ada" >&5
+echo "configure:2179: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2177: checking how to compare bootstrapped objects" >&5
+echo "configure:2211: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2275: checking for correct version of gmp.h" >&5
+echo "configure:2309: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2277 "configure"
+#line 2311 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2301: checking for MPFR" >&5
+echo "configure:2335: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2306 "configure"
+#line 2340 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
fi
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i3456786-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i3456786-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv45* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
;;
esac
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes | yes:$build:$build:lean)
+ yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
- yes:*:*:yes | yes:*:*:lean)
+ yes:*:*:yes)
echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes | no:*:*:lean)
+ no:*:*:yes)
{ echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
# Fail if wrong command line
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
- bootstrap_lean='#'
- bootstrap_suffix=bootstrap ;;
- lean)
- bootstrap_lean=''
bootstrap_suffix=bootstrap ;;
no)
bootstrap_suffix=no-bootstrap ;;
esac
-
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
fi
extrasub="$extrasub
/^@if $module\$/d
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3312: checking for $ac_word" >&5
+echo "configure:3393: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3352: checking for $ac_word" >&5
+echo "configure:3433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3391: checking for $ac_word" >&5
+echo "configure:3472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3430: checking for $ac_word" >&5
+echo "configure:3511: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3470: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3509: checking for $ac_word" >&5
+echo "configure:3590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3562: checking for $ac_word" >&5
+echo "configure:3643: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3684: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3651: checking for $ac_word" >&5
+echo "configure:3732: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3682: checking for $ac_word" >&5
+echo "configure:3763: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3726: checking for $ac_word" >&5
+echo "configure:3807: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3757: checking for $ac_word" >&5
+echo "configure:3838: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3801: checking for $ac_word" >&5
+echo "configure:3882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3832: checking for $ac_word" >&5
+echo "configure:3913: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3876: checking for $ac_word" >&5
+echo "configure:3957: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3907: checking for $ac_word" >&5
+echo "configure:3988: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3951: checking for $ac_word" >&5
+echo "configure:4032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3982: checking for $ac_word" >&5
+echo "configure:4063: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4026: checking for $ac_word" >&5
+echo "configure:4107: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4057: checking for $ac_word" >&5
+echo "configure:4138: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4101: checking for $ac_word" >&5
+echo "configure:4182: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4132: checking for $ac_word" >&5
+echo "configure:4213: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4171: checking for $ac_word" >&5
+echo "configure:4252: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4202: checking for $ac_word" >&5
+echo "configure:4283: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4241: checking for $ac_word" >&5
+echo "configure:4322: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4272: checking for $ac_word" >&5
+echo "configure:4353: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4316: checking for $ac_word" >&5
+echo "configure:4397: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4347: checking for $ac_word" >&5
+echo "configure:4428: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4391: checking for $ac_word" >&5
+echo "configure:4472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4422: checking for $ac_word" >&5
+echo "configure:4503: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Target tools.
- for ncn_progname in ar; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+# Check whether --with-build-time-tools or --without-build-time-tools was given.
+if test "${with_build_time_tools+set}" = set; then
+ withval="$with_build_time_tools"
+ case x"$withval" in
+ x/*) ;;
+ *)
+ with_build_time_tools=
+ echo "configure: warning: argument to --with-build-time-tools must be an absolute path" 1>&2
+ ;;
+ esac
+else
+ with_build_time_tools=
+fi
+
+
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in cc gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4567: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/CC_FOR_TARGET; then
+ ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/CC_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4473: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4584: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4504: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4615: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_AR_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
- set dummy ar
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
if test $build = $target ; then
- AR_FOR_TARGET="$2"
+ CC_FOR_TARGET="$2"
else
- AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in as; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4658: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/CXX_FOR_TARGET; then
+ ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/CXX_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4548: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4675: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4579: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4706: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_AS_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
- set dummy as
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
if test $build = $target ; then
- AS_FOR_TARGET="$2"
+ CXX_FOR_TARGET="$2"
else
- AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in cc gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4749: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GCC_FOR_TARGET; then
+ ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/GCC_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4623: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4766: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC_FOR_TARGET"; then
- ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
-if test -n "$CC_FOR_TARGET"; then
- echo "$ac_t""$CC_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4654: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4797: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC_FOR_TARGET"; then
- ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
-if test -n "$CC_FOR_TARGET"; then
- echo "$ac_t""$CC_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_CC_FOR_TARGET" && break
-done
+ fi
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
+fi
-if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
- set dummy cc gcc
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcj; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4835: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GCJ_FOR_TARGET; then
+ ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/GCJ_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4852: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4883: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
if test $build = $target ; then
- CC_FOR_TARGET="$2"
+ GCJ_FOR_TARGET="$2"
else
- CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in c++ g++ cxx gxx; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gfortran; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4926: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GFORTRAN_FOR_TARGET; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/GFORTRAN_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4698: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4943: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CXX_FOR_TARGET"; then
- ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
-if test -n "$CXX_FOR_TARGET"; then
- echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4729: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4974: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CXX_FOR_TARGET"; then
- ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
-if test -n "$CXX_FOR_TARGET"; then
- echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
- set dummy c++ g++ cxx gxx
- if test $build = $target ; then
- CXX_FOR_TARGET="$2"
+
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
else
- CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ PATH_SEPARATOR=:
fi
+ rm -f conf$$.sh
fi
- for ncn_progname in dlltool; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
+fi
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+cat > conftest.c << \EOF
+#ifdef __GNUC__
+ gcc_yay;
+#endif
+EOF
+if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
+ have_gcc_for_target=yes
+else
+ GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
+ have_gcc_for_target=no
+fi
+rm conftest.c
+
+
+
+
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5081: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/AR_FOR_TARGET
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AR_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ar`
+ test $AR_FOR_TARGET=ar && AR_FOR_TARGET=
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5095: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AR_FOR_TARGET" in
+ /*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AR_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AR_FOR_TARGET="$ac_cv_path_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ar; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5132: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/AR_FOR_TARGET; then
+ ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/AR_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4773: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5149: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4804: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5180: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
- set dummy dlltool
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
if test $build = $target ; then
- DLLTOOL_FOR_TARGET="$2"
+ AR_FOR_TARGET="$2"
else
- DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+fi
+
+
+
+
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5228: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/AS_FOR_TARGET
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AS_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=as`
+ test $AS_FOR_TARGET=as && AS_FOR_TARGET=
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
fi
fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5242: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AS_FOR_TARGET" in
+ /*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AS_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AS_FOR_TARGET="$ac_cv_path_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in as; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5279: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/AS_FOR_TARGET; then
+ ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/AS_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
- for ncn_progname in gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4848: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5296: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4879: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5327: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
- GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- for ncn_progname in gcj; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5375: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/DLLTOOL_FOR_TARGET
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ DLLTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=dlltool`
+ test $DLLTOOL_FOR_TARGET=dlltool && DLLTOOL_FOR_TARGET=
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5389: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$DLLTOOL_FOR_TARGET" in
+ /*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_DLLTOOL_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+DLLTOOL_FOR_TARGET="$ac_cv_path_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in dlltool; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5426: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/DLLTOOL_FOR_TARGET; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/DLLTOOL_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4918: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5443: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4949: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5474: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
+ DLLTOOL_FOR_TARGET="$2"
else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in gfortran; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4993: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
-else
- echo "$ac_t""no" 1>&6
fi
+
+
+
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5522: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/LD_FOR_TARGET
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LD_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ld`
+ test $LD_FOR_TARGET=ld && LD_FOR_TARGET=
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
fi
- if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5024: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5536: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
-else
+ case "$LD_FOR_TARGET" in
+ /*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ ac_cv_path_LD_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_path_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
-done
-if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
- set dummy gfortran
- if test $build = $target ; then
- GFORTRAN_FOR_TARGET="$2"
- else
- GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ld; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5573: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/LD_FOR_TARGET; then
+ ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/LD_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in ld; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5068: checking for $ac_word" >&5
+echo "configure:5590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5099: checking for $ac_word" >&5
+echo "configure:5621: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LD_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
set dummy ld
if test $build = $target ; then
fi
fi
- for ncn_progname in lipo; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5669: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/LIPO_FOR_TARGET
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
+ test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5683: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$LIPO_FOR_TARGET" in
+ /*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIPO_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+LIPO_FOR_TARGET="$ac_cv_path_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in lipo; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5720: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/LIPO_FOR_TARGET; then
+ ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/LIPO_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5143: checking for $ac_word" >&5
+echo "configure:5737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5174: checking for $ac_word" >&5
+echo "configure:5768: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
set dummy lipo
if test $build = $target ; then
fi
fi
- for ncn_progname in nm; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5816: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/NM_FOR_TARGET
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
+ test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5830: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$NM_FOR_TARGET" in
+ /*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_NM_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+NM_FOR_TARGET="$ac_cv_path_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in nm; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5867: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/NM_FOR_TARGET; then
+ ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/NM_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5218: checking for $ac_word" >&5
+echo "configure:5884: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5915: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+fi
+
+
+
+
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5963: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/OBJDUMP_FOR_TARGET
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
+ test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5977: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
-else
+ case "$OBJDUMP_FOR_TARGET" in
+ /*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ ac_cv_path_OBJDUMP_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
-if test -n "$NM_FOR_TARGET"; then
- echo "$ac_t""$NM_FOR_TARGET" 1>&6
+OBJDUMP_FOR_TARGET="$ac_cv_path_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_NM_FOR_TARGET" && break
-done
-if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
- set dummy nm
- if test $build = $target ; then
- NM_FOR_TARGET="$2"
- else
- NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in objdump; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6014: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/OBJDUMP_FOR_TARGET; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/OBJDUMP_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in objdump; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ for ncn_progname in objdump; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5293: checking for $ac_word" >&5
+echo "configure:6031: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5324: checking for $ac_word" >&5
+echo "configure:6062: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
set dummy objdump
if test $build = $target ; then
fi
fi
- for ncn_progname in ranlib; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6110: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/RANLIB_FOR_TARGET
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
+ test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6124: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$RANLIB_FOR_TARGET" in
+ /*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_RANLIB_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+RANLIB_FOR_TARGET="$ac_cv_path_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ranlib; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6161: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/RANLIB_FOR_TARGET; then
+ ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/RANLIB_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5368: checking for $ac_word" >&5
+echo "configure:6178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5399: checking for $ac_word" >&5
+echo "configure:6209: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ set dummy ranlib
+ if test $build = $target ; then
+ RANLIB_FOR_TARGET="$2"
+ else
+ RANLIB_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
- RANLIB_FOR_TARGET=":"
fi
- for ncn_progname in strip; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6257: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/STRIP_FOR_TARGET
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
+ test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6271: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$STRIP_FOR_TARGET" in
+ /*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_STRIP_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+STRIP_FOR_TARGET="$ac_cv_path_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in strip; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6308: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/STRIP_FOR_TARGET; then
+ ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/STRIP_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5438: checking for $ac_word" >&5
+echo "configure:6325: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5469: checking for $ac_word" >&5
+echo "configure:6356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
set dummy strip
if test $build = $target ; then
fi
fi
- for ncn_progname in windres; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6404: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/WINDRES_FOR_TARGET
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
+ test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6418: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$WINDRES_FOR_TARGET" in
+ /*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_WINDRES_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+WINDRES_FOR_TARGET="$ac_cv_path_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in windres; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6455: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/WINDRES_FOR_TARGET; then
+ ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/WINDRES_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5513: checking for $ac_word" >&5
+echo "configure:6472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5544: checking for $ac_word" >&5
+echo "configure:6503: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
set dummy windres
if test $build = $target ; then
fi
fi
+fi
+
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:5587: checking where to find the target ar" >&5
+echo "configure:6549: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AR_FOR_TARGET='$(AR)'
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:5612: checking where to find the target as" >&5
+echo "configure:6582: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AS_FOR_TARGET='$(AS)'
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:5637: checking where to find the target cc" >&5
+echo "configure:6615: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CC_FOR_TARGET='$(CC)'
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:5662: checking where to find the target c++" >&5
+echo "configure:6648: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:5690: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6684: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RAW_CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:5718: checking where to find the target dlltool" >&5
+echo "configure:6720: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:5743: checking where to find the target gcc" >&5
+echo "configure:6753: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCC_FOR_TARGET='$()'
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:5768: checking where to find the target gcj" >&5
+echo "configure:6786: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCJ_FOR_TARGET='$(GCJ)'
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:5796: checking where to find the target gfortran" >&5
+echo "configure:6822: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GFORTRAN_FOR_TARGET='$(GFORTRAN)'
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:5824: checking where to find the target ld" >&5
+echo "configure:6858: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
LD_FOR_TARGET='$(LD)'
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:5849: checking where to find the target lipo" >&5
+echo "configure:6891: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
- if test "x$target" = "x$host"; then
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ elif test "x$target" = "x$host"; then
# We can use an host tool
LIPO_FOR_TARGET='$(LIPO)'
echo "$ac_t""host tool" 1>&6
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:5864: checking where to find the target nm" >&5
+echo "configure:6914: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
NM_FOR_TARGET='$(NM)'
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:5889: checking where to find the target objdump" >&5
+echo "configure:6947: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:5914: checking where to find the target ranlib" >&5
+echo "configure:6980: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RANLIB_FOR_TARGET='$(RANLIB)'
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:5939: checking where to find the target strip" >&5
+echo "configure:7013: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
STRIP_FOR_TARGET='$(STRIP)'
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:5964: checking where to find the target windres" >&5
+echo "configure:7046: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
WINDRES_FOR_TARGET='$(WINDRES)'
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6017: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7107: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
esac
-# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
-# possible, however, we can resort to mv.
-echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:6064: checking if symbolic links between directories work" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "${LN_S}" = "ln -s" \
- && mkdir confdir.s1 \
- && ln -s confdir.s1 confdir.s2 \
- && echo timestamp1 > confdir.s1/conftest.1 \
- && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
- && echo timestamp2 > confdir.s2/conftest.2 \
- && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
- && rm -f confdir.s2; then
- gcc_cv_prog_ln_s_dir=yes
-else
- gcc_cv_prog_ln_s_dir=no
-fi
-rm -rf confdir.s1 confdir.s2
-fi
-
-echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
-
-case ${gcc_cv_prog_ln_s_dir} in
- yes)
- CREATE_LINK_TO_DIR='ln -s $$1 $$2'
- UNDO_LINK_TO_DIR='rm -f $$1' ;;
- *)
- CREATE_LINK_TO_DIR='mv $$1 $$2'
- UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
-esac
-
-
-
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
# Check whether --enable-werror or --disable-werror was given.
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
-s%@bootstrap_lean@%$bootstrap_lean%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
/@host_makefile_frag@/r $host_makefile_frag
s%@OBJDUMP@%$OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@stage1_cflags@%$stage1_cflags%g
-s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
-s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
CEOF
OSDN Git Service
