# run only in the target environment
#
# note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list. those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
#
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-examples target-gperf target-rda"
################################################################################
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
- yes) skipdirs="${skipdirs} ${native_only}" ;;
esac
# If both --with-headers and --with-libs are specified, default to
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+ | *-*-solaris2* | *-*-nto*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
# exist yet.
case "${host}" in
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs byacc"
- ;;
- i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[3456789]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
- *-*-cygwin*)
- noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
- ;;
- *-*-netbsd*)
- noconfigdirs="$noconfigdirs rcs"
- ;;
- ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
- ;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
+ i[3456789]86-*-msdosdjgpp*)
+ noconfigdirs="$noconfigdirs tcl tk itcl"
;;
esac
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
- *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
*-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
;;
noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ *-*-dragonfly*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
- skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
+ skipdirs="target-libiberty ${libgcj} target-libstdc++-v3"
+ skipdirs="$skipdirs target-libobjc"
skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
skipdirs="${skipdirs} target-libiberty"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
- # newlib is not 64 bit ready. I'm not sure about fileutils.
+ # newlib is not 64 bit ready.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+ noconfigdirs="$noconfigdirs target-libiberty"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
noconfigdirs="$noconfigdirs target-newlib"
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb and readline
- *) noconfigdirs="$noconfigdirs gdb readline"
- ;;
- esac
libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff | strongarm-*-coff | xscale-*-coff)
+ arm-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ arm-*-elf* | arm*-*-eabi* )
+ noconfigdirs="$noconfigdirs target-libffi"
libgloss_dir=arm
;;
arm*-*-linux-gnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
+ noconfigdirs="$noconfigdirs"
case ${with_newlib} in
no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb"
;;
cr16-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
esac
libgloss_dir=cris
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
- ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
+ hppa*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
noconfigdirs="$noconfigdirs ${libgcj}"
;;
hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld shellutils"
+ noconfigdirs="$noconfigdirs ld"
;;
hppa*-*-pro*)
libgloss_dir=pa
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ noconfigdirs="$noconfigdirs ld ${libgcj}"
;;
i960-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb"
;;
ia64*-**-hpux*)
# No ld support yet.
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
- ;;
- i370-*-opened*)
+ noconfigdirs="$noconfigdirs ${libgcj} readline libgui itcl gdb ld"
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
# 'target-newlib' will appear in skipdirs.
;;
i[3456789]86-w64-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
i[3456789]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
- i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
+ i[3456789]86-*-interix* )
;;
i[3456789]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim tcl tk itcl ${libgcj}"
libgloss_dir=rs6000
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
sh-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
- i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
- *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
- esac
case "${target}" in
sh*-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}" ;;
esac
# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[3456789]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[3456789]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[3456789]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[3456789]86-*-sco3.2v5*)
- ;;
- i[3456789]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[3456789]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[3456789]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
- tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
+ hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- ;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
- ;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[3456789]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
if test "${build}" != "${host}" ; then
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
with_ppl=yes
fi
-if test "x$with_ppl" = xyes; then
+if test "x$with_ppl" != xno; then
if test "x$pwllib" = x; then
- saved_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $ppllibs"
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $ppllibs -lstdc++ -lm"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
pwllib="-lpwl"
fi
- LDFLAGS="$saved_LDFLAGS"
+ LIBS="$saved_LIBS"
fi
ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
else
if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
# ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac