PR libgcj/28178:

[pf3gnuchains/gcc-fork.git] / configure

diff --git a/configure b/configure
index e85f028..8ef6b89 100755 (executable)
--- a/configure
+++ b/configure
@@ -1157,7 +1157,7 @@ if test x$enable_libgomp = x ; then
        ;;
     *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
        ;;
-    *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
+    *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
        ;;
     *-*-darwin* | *-*-aix*)
        ;;
@@ -1170,7 +1170,7 @@ fi
 
 case "${target}" in
   *-*-chorusos)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
@@ -1179,10 +1179,10 @@ case "${target}" in
   *-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   *-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -1196,13 +1196,13 @@ case "${target}" in
       i*86-*-*) ;;
       alpha*-*-*) ;;
       *)
-       noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+       noconfigdirs="$noconfigdirs ${libgcj}"
        ;;
     esac
     ;;
   *-*-kaos*)
     # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty target-boehm-gc ${libgcj} target-libstdc++-v3 target-librx"
+    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
     skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
     skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
     noconfigdirs="$noconfigdirs target-libgloss"
@@ -1216,25 +1216,25 @@ case "${target}" in
       i*86-*-netbsdelf*) ;;
       arm*-*-netbsdelf*) ;;
       *)
-       noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+       noconfigdirs="$noconfigdirs ${libgcj}"
        ;;
     esac
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss target-boehm-gc ${libgcj} target-libmudflap"
+    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
     ;;
   *-*-rtems*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-boehm-gc ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
@@ -1243,7 +1243,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
     ;;
   alpha*-*-linux*)
     # newlib is not 64 bit ready
@@ -1251,16 +1251,16 @@ case "${target}" in
     ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   am33_2.0-*-linux*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;
   sh-*-linux*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     noconfigdirs="$noconfigdirs target-examples"
     noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
@@ -1275,12 +1275,12 @@ case "${target}" in
     esac
     ;;
   arc-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   arm-semi-aof )
     ;;
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
@@ -1290,25 +1290,25 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libjava target-libobjc"
     ;;
   arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-libiberty"
+    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
     ;;
   arm-*-pe*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   thumb-*-coff)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   thumb-*-elf)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   thumb-*-pe)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   arm-*-riscix*)
-    noconfigdirs="$noconfigdirs ld target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   bfin-*-*)
     noconfigdirs="$noconfigdirs target-libgloss gdb"
@@ -1317,10 +1317,10 @@ case "${target}" in
     fi
     ;;
   c4x-*-* | tic4x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   c54x*-*-* | tic54x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj} gcc gdb newlib"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
   cris-*-* | crisv32-*-*)
     unsupported_languages="$unsupported_languages java"
@@ -1335,29 +1335,29 @@ case "${target}" in
        noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
       *)
        unsupported_languages="$unsupported_languages fortran"
-       noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss";;
+       noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
     esac
     ;;
   crx-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
     ;;
   d10v-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   fr30-*-elf*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   frv-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   h8300*-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   hppa1.1-*-osf* | hppa1.1-*-bsd* )
     ;;
@@ -1373,7 +1373,7 @@ case "${target}" in
   hppa*-*-lites* | \
   hppa*-*-openbsd* | \
   hppa*64*-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   hppa*-hp-hpux11*)
     noconfigdirs="$noconfigdirs ld shellutils"
@@ -1381,10 +1381,10 @@ case "${target}" in
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
-    noconfigdirs="$noconfigdirs ld shellutils target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
     ;;
   i960-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
@@ -1392,19 +1392,19 @@ case "${target}" in
     ;;
   ia64*-**-hpux*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} readline mmalloc libgui itcl gdb ld"
+    noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
   i370-*-opened*)
     ;;
   i[3456789]86-*-coff | i[3456789]86-*-elf)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   i[3456789]86-*-linux*)
     # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
     # not build java stuff by default.
     case "${target}" in
       *-*-*libc1*)
-       noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}";;
+       noconfigdirs="$noconfigdirs ${libgcj}";;
     esac
 
     # This section makes it possible to build newlib natively on linux.
@@ -1420,7 +1420,7 @@ case "${target}" in
     ;;
   i[3456789]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
@@ -1431,7 +1431,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -1450,39 +1450,39 @@ case "${target}" in
   i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
     ;;
   i[3456789]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   i[3456789]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
-    noconfigdirs="$noconfigdirs ld target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
   i[3456789]86-*-sco*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   i[3456789]86-*-solaris2*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-sysv4*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   i[3456789]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   i[3456789]86-*-rdos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   m32r-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   m68k-*-elf*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   m68k-*-coff*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   mcore-*-pe*)
   # The EPOC C++ environment does not support exceptions or rtti,
@@ -1494,78 +1494,78 @@ case "${target}" in
     unsupported_languages="$unsupported_languages fortran java"
     ;;
   mn10200-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   mn10300-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
     ;;
   rs6000-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib gprof target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
     ;;
   rs6000-*-*)
-    noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   m68k-apollo-*)
-    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-irix5*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-irix6*)
     # Linking libjava exceeds command-line length limits on at least
     # IRIX 6.2, but not on IRIX 6.5.
     # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
     # <oldham@codesourcery.com>
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-dec-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mipstx39-*-*)
-    noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}"   # same as generic mips
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"   # same as generic mips
     ;;
   mips64*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
     ;;
   mips*-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   mips*-*-*)
-    noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   romp-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
     ;;
   sh-*-* | sh64-*-*)
     case "${host}" in
@@ -1574,19 +1574,19 @@ case "${target}" in
       i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
       *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
     esac
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   sparc-*-elf*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc64-*-elf*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparclite-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc-*-sunos4*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if test x${is_cross_compiler} != xno ; then
            noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     else
@@ -1594,42 +1594,42 @@ case "${target}" in
     fi
     ;;
   sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
   v810-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
     ;;
   v850-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   v850e-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   v850ea-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   vax-*-vms)
-    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
     ;;
   vax-*-*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   xtensa-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   ip2k-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;; 
   *-*-*)
-    noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
 esac
 
@@ -2540,20 +2540,15 @@ fi
 
 
 # Make sure we only build Boehm's garbage collector if required.
-case ,${enable_languages},:${enable_libgcj}:${enable_objc_gc} in
-  *,objc,*:*:yes)
+case ,${enable_languages},:${enable_objc_gc} in
+  *,objc,*:yes)
     # Keep target-boehm-gc if requested for Objective-C.
     ;;
-  *,java,*:no:*)
-    # Remove target-boehm-gc if libgcj has been disabled explicitly.
-    noconfigdirs="$noconfigdirs target-boehm-gc"
-    ;;
-  *,java,*:*:*)
-    # Keep target-boehm-gc by default for Java.
-    ;;
   *)
-    # Otherwise remove target-boehm-gc.
-    noconfigdirs="$noconfigdirs target-boehm-gc"
+    # Otherwise remove target-boehm-gc depending on target-libjava.
+    if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+      noconfigdirs="$noconfigdirs target-boehm-gc"
+    fi
     ;;
 esac
 
@@ -3430,7 +3425,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3434: checking for $ac_word" >&5
+echo "configure:3429: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3470,7 +3465,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3474: checking for $ac_word" >&5
+echo "configure:3469: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3509,7 +3504,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3513: checking for $ac_word" >&5
+echo "configure:3508: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3548,7 +3543,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3552: checking for $ac_word" >&5
+echo "configure:3547: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3588,7 +3583,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3592: checking for $ac_word" >&5
+echo "configure:3587: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3627,7 +3622,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3631: checking for $ac_word" >&5
+echo "configure:3626: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3680,7 +3675,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3684: checking for $ac_word" >&5
+echo "configure:3679: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3721,7 +3716,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3725: checking for $ac_word" >&5
+echo "configure:3720: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3769,7 +3764,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3773: checking for $ac_word" >&5
+echo "configure:3768: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3800,7 +3795,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3804: checking for $ac_word" >&5
+echo "configure:3799: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3844,7 +3839,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3848: checking for $ac_word" >&5
+echo "configure:3843: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3875,7 +3870,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3879: checking for $ac_word" >&5
+echo "configure:3874: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3919,7 +3914,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3923: checking for $ac_word" >&5
+echo "configure:3918: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3950,7 +3945,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3954: checking for $ac_word" >&5
+echo "configure:3949: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3994,7 +3989,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3998: checking for $ac_word" >&5
+echo "configure:3993: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4025,7 +4020,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4029: checking for $ac_word" >&5
+echo "configure:4024: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4069,7 +4064,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4073: checking for $ac_word" >&5
+echo "configure:4068: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4100,7 +4095,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4104: checking for $ac_word" >&5
+echo "configure:4099: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4144,7 +4139,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4148: checking for $ac_word" >&5
+echo "configure:4143: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4175,7 +4170,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4179: checking for $ac_word" >&5
+echo "configure:4174: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4219,7 +4214,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4223: checking for $ac_word" >&5
+echo "configure:4218: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4250,7 +4245,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4254: checking for $ac_word" >&5
+echo "configure:4249: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4289,7 +4284,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4293: checking for $ac_word" >&5
+echo "configure:4288: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4320,7 +4315,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4324: checking for $ac_word" >&5
+echo "configure:4319: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4359,7 +4354,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4363: checking for $ac_word" >&5
+echo "configure:4358: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4390,7 +4385,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4394: checking for $ac_word" >&5
+echo "configure:4389: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4434,7 +4429,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4438: checking for $ac_word" >&5
+echo "configure:4433: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4465,7 +4460,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4469: checking for $ac_word" >&5
+echo "configure:4464: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4509,7 +4504,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4513: checking for $ac_word" >&5
+echo "configure:4508: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4540,7 +4535,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4544: checking for $ac_word" >&5
+echo "configure:4539: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4604,7 +4599,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in cc gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4608: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4603: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4621,7 +4616,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4625: checking for $ac_word" >&5
+echo "configure:4620: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4652,7 +4647,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4656: checking for $ac_word" >&5
+echo "configure:4651: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4695,7 +4690,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in c++ g++ cxx gxx; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4699: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4694: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4712,7 +4707,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4716: checking for $ac_word" >&5
+echo "configure:4711: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4743,7 +4738,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4747: checking for $ac_word" >&5
+echo "configure:4742: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4786,7 +4781,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4790: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4785: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4803,7 +4798,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4807: checking for $ac_word" >&5
+echo "configure:4802: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4834,7 +4829,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4838: checking for $ac_word" >&5
+echo "configure:4833: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4872,7 +4867,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcj; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4876: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4871: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4889,7 +4884,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4893: checking for $ac_word" >&5
+echo "configure:4888: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4920,7 +4915,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4924: checking for $ac_word" >&5
+echo "configure:4919: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4963,7 +4958,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gfortran; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4967: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4962: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4980,7 +4975,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4984: checking for $ac_word" >&5
+echo "configure:4979: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5011,7 +5006,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5015: checking for $ac_word" >&5
+echo "configure:5010: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5118,7 +5113,7 @@ rm conftest.c
 if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5122: checking for ar in $with_build_time_tools" >&5
+echo "configure:5117: checking for ar in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ar; then
       AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
       ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
@@ -5136,7 +5131,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5140: checking for $ac_word" >&5
+echo "configure:5135: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5173,7 +5168,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ar; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5177: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5172: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5190,7 +5185,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5194: checking for $ac_word" >&5
+echo "configure:5189: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5221,7 +5216,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5225: checking for $ac_word" >&5
+echo "configure:5220: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5271,7 +5266,7 @@ fi
 if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5275: checking for as in $with_build_time_tools" >&5
+echo "configure:5270: checking for as in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/as; then
       AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
       ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
@@ -5289,7 +5284,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5293: checking for $ac_word" >&5
+echo "configure:5288: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5326,7 +5321,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in as; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5330: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5325: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5343,7 +5338,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5347: checking for $ac_word" >&5
+echo "configure:5342: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5374,7 +5369,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5378: checking for $ac_word" >&5
+echo "configure:5373: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5424,7 +5419,7 @@ fi
 if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5428: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5423: checking for dlltool in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/dlltool; then
       DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
       ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
@@ -5442,7 +5437,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5446: checking for $ac_word" >&5
+echo "configure:5441: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5479,7 +5474,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in dlltool; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5483: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5478: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5496,7 +5491,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5500: checking for $ac_word" >&5
+echo "configure:5495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5527,7 +5522,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5531: checking for $ac_word" >&5
+echo "configure:5526: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5577,7 +5572,7 @@ fi
 if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5581: checking for ld in $with_build_time_tools" >&5
+echo "configure:5576: checking for ld in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ld; then
       LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
       ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
@@ -5595,7 +5590,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5599: checking for $ac_word" >&5
+echo "configure:5594: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5632,7 +5627,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ld; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5636: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5631: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5649,7 +5644,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5653: checking for $ac_word" >&5
+echo "configure:5648: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5680,7 +5675,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5684: checking for $ac_word" >&5
+echo "configure:5679: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5730,7 +5725,7 @@ fi
 if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5734: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5729: checking for lipo in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/lipo; then
       LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
       ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
@@ -5748,7 +5743,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5752: checking for $ac_word" >&5
+echo "configure:5747: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5785,7 +5780,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in lipo; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5789: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5784: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5802,7 +5797,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5806: checking for $ac_word" >&5
+echo "configure:5801: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5833,7 +5828,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5837: checking for $ac_word" >&5
+echo "configure:5832: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5883,7 +5878,7 @@ fi
 if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5887: checking for nm in $with_build_time_tools" >&5
+echo "configure:5882: checking for nm in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/nm; then
       NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
       ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
@@ -5901,7 +5896,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5905: checking for $ac_word" >&5
+echo "configure:5900: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5938,7 +5933,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in nm; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5942: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5937: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5955,7 +5950,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5959: checking for $ac_word" >&5
+echo "configure:5954: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5986,7 +5981,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5990: checking for $ac_word" >&5
+echo "configure:5985: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6036,7 +6031,7 @@ fi
 if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6040: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6035: checking for objdump in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/objdump; then
       OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
       ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
@@ -6054,7 +6049,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6058: checking for $ac_word" >&5
+echo "configure:6053: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6091,7 +6086,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in objdump; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6095: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6090: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6108,7 +6103,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6112: checking for $ac_word" >&5
+echo "configure:6107: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6139,7 +6134,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6143: checking for $ac_word" >&5
+echo "configure:6138: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6189,7 +6184,7 @@ fi
 if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6193: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6188: checking for ranlib in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ranlib; then
       RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
       ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
@@ -6207,7 +6202,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6211: checking for $ac_word" >&5
+echo "configure:6206: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6244,7 +6239,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ranlib; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6248: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6243: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6261,7 +6256,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6265: checking for $ac_word" >&5
+echo "configure:6260: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6292,7 +6287,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6296: checking for $ac_word" >&5
+echo "configure:6291: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6342,7 +6337,7 @@ fi
 if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6346: checking for strip in $with_build_time_tools" >&5
+echo "configure:6341: checking for strip in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/strip; then
       STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
       ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
@@ -6360,7 +6355,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6364: checking for $ac_word" >&5
+echo "configure:6359: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6397,7 +6392,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in strip; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6401: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6396: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6414,7 +6409,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6418: checking for $ac_word" >&5
+echo "configure:6413: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6445,7 +6440,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6449: checking for $ac_word" >&5
+echo "configure:6444: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6495,7 +6490,7 @@ fi
 if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6499: checking for windres in $with_build_time_tools" >&5
+echo "configure:6494: checking for windres in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/windres; then
       WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
       ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
@@ -6513,7 +6508,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6517: checking for $ac_word" >&5
+echo "configure:6512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6550,7 +6545,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in windres; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6554: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6549: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6567,7 +6562,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6571: checking for $ac_word" >&5
+echo "configure:6566: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6598,7 +6593,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6602: checking for $ac_word" >&5
+echo "configure:6597: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6646,7 +6641,7 @@ fi
 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 
 echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6650: checking where to find the target ar" >&5
+echo "configure:6645: checking where to find the target ar" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6679,7 +6674,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6683: checking where to find the target as" >&5
+echo "configure:6678: checking where to find the target as" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6712,7 +6707,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6716: checking where to find the target cc" >&5
+echo "configure:6711: checking where to find the target cc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6745,7 +6740,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6749: checking where to find the target c++" >&5
+echo "configure:6744: checking where to find the target c++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6781,7 +6776,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6785: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6780: checking where to find the target c++ for libstdc++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6817,7 +6812,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6821: checking where to find the target dlltool" >&5
+echo "configure:6816: checking where to find the target dlltool" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6850,7 +6845,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6854: checking where to find the target gcc" >&5
+echo "configure:6849: checking where to find the target gcc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6883,7 +6878,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6887: checking where to find the target gcj" >&5
+echo "configure:6882: checking where to find the target gcj" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6919,7 +6914,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6923: checking where to find the target gfortran" >&5
+echo "configure:6918: checking where to find the target gfortran" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6955,7 +6950,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6959: checking where to find the target ld" >&5
+echo "configure:6954: checking where to find the target ld" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6988,7 +6983,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6992: checking where to find the target lipo" >&5
+echo "configure:6987: checking where to find the target lipo" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7011,7 +7006,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:7015: checking where to find the target nm" >&5
+echo "configure:7010: checking where to find the target nm" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7044,7 +7039,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7048: checking where to find the target objdump" >&5
+echo "configure:7043: checking where to find the target objdump" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7077,7 +7072,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7081: checking where to find the target ranlib" >&5
+echo "configure:7076: checking where to find the target ranlib" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7110,7 +7105,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7114: checking where to find the target strip" >&5
+echo "configure:7109: checking where to find the target strip" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7143,7 +7138,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7147: checking where to find the target windres" >&5
+echo "configure:7142: checking where to find the target windres" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7204,7 +7199,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7208: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7203: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"