ac_help="$ac_help
--enable-libssp Builds libssp directory"
ac_help="$ac_help
- --enable-libgcc-math Builds libgcc-math directory"
-ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
ac_help="$ac_help
+ --enable-objc-gc enable the use of Boehm's garbage collector with
+ the GNU Objective-C runtime."
+ac_help="$ac_help
--with-build-sysroot=sysroot
use sysroot as the system root during the build"
ac_help="$ac_help
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
--enable-werror enable -Werror in bootstrap stage2 and later"
+ac_help="$ac_help
+ --with-datarootdir Use datarootdir as the data root directory."
+ac_help="$ac_help
+ --with-docdir Install documentation in this directory."
+ac_help="$ac_help
+ --with-htmldir Install html in this directory."
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:605: checking host system type" >&5
+echo "configure:612: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:626: checking target system type" >&5
+echo "configure:633: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:644: checking build system type" >&5
+echo "configure:651: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:699: checking for a BSD compatible install" >&5
+echo "configure:706: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:752: checking whether ln works" >&5
+echo "configure:759: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:776: checking whether ln -s works" >&5
+echo "configure:783: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
- target-boehm-gc \
target-zlib \
target-qthreads \
target-libjava"
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
- target-libgcc-math \
target-libgfortran \
+ target-boehm-gc \
${libgcj} \
target-libobjc \
target-libada \
# Some tools are only suitable for building in a "native" situation.
# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
# Similarly, some are only suitable for cross toolchains.
# Remove these if host=target.
fi
-# Set the default so we build libgcc-math for ix86 and x86_64
-# Check whether --enable-libgcc-math or --disable-libgcc-math was given.
-if test "${enable_libgcc_math+set}" = set; then
- enableval="$enable_libgcc_math"
- :
-else
-
-case "${target}" in
- i?86-* | x86_64-* )
- enable_libgcc_math=yes ;;
- *)
- enable_libgcc_math=no ;;
-esac
-
-fi
-
-
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
;;
- *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
+ *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- m32c-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready. I'm not sure about fileutils.
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ hppa*-hp-hpux11*)
+ noconfigdirs="$noconfigdirs ld shellutils"
+ ;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1861: checking for $ac_word" >&5
+echo "configure:1850: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1891: checking for $ac_word" >&5
+echo "configure:1880: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1942: checking for $ac_word" >&5
+echo "configure:1931: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1963: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1985 "configure"
+#line 1974 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2005: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2021: checking whether we are using GNU C" >&5
+echo "configure:2010: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2049: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2038: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2116: checking for $ac_word" >&5
+echo "configure:2105: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2148: checking for $ac_word" >&5
+echo "configure:2137: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2181: checking whether compiler driver understands Ada" >&5
+echo "configure:2170: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2213: checking how to compare bootstrapped objects" >&5
+echo "configure:2202: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2311: checking for correct version of gmp.h" >&5
+echo "configure:2300: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2313 "configure"
+#line 2302 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2337: checking for MPFR" >&5
+echo "configure:2326: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2342 "configure"
+#line 2331 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
rm -f conftest*
LIBS="$saved_LIBS"
- CFLAGS="$saved_CFLAGS"
fi
+CFLAGS="$saved_CFLAGS"
# Flags needed for both GMP and/or MPFR
fi
done
+# Check for Boehm's garbage collector
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+ *,objc,*:*:yes:*target-boehm-gc*)
+ { echo "configure: error: Boehm's garbage collector was requested yet not supported in this configuration" 1>&2; exit 1; }
+ ;;
+esac
+fi
+
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+ *,objc,*:yes)
+ # Keep target-boehm-gc if requested for Objective-C.
+ ;;
+ *)
+ # Otherwise remove target-boehm-gc depending on target-libjava.
+ if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ fi
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ m32c-*-* )
+ if test -d ${srcdir}/libgloss/m32c; then
+ # This is for crt0.o
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for r8c.ld
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for libnosys.a
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ fi
+ ;;
+esac
+
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3401: checking for $ac_word" >&5
+echo "configure:3429: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3441: checking for $ac_word" >&5
+echo "configure:3469: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3480: checking for $ac_word" >&5
+echo "configure:3508: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3519: checking for $ac_word" >&5
+echo "configure:3547: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3559: checking for $ac_word" >&5
+echo "configure:3587: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3598: checking for $ac_word" >&5
+echo "configure:3626: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
+ # For an installed makeinfo, we require it to be from texinfo 4.4 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
:
else
MAKEINFO="$MISSING makeinfo"
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3651: checking for $ac_word" >&5
+echo "configure:3679: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3692: checking for $ac_word" >&5
+echo "configure:3720: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3740: checking for $ac_word" >&5
+echo "configure:3768: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3771: checking for $ac_word" >&5
+echo "configure:3799: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3815: checking for $ac_word" >&5
+echo "configure:3843: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3846: checking for $ac_word" >&5
+echo "configure:3874: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3890: checking for $ac_word" >&5
+echo "configure:3918: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3921: checking for $ac_word" >&5
+echo "configure:3949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3965: checking for $ac_word" >&5
+echo "configure:3993: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3996: checking for $ac_word" >&5
+echo "configure:4024: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4040: checking for $ac_word" >&5
+echo "configure:4068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4071: checking for $ac_word" >&5
+echo "configure:4099: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4115: checking for $ac_word" >&5
+echo "configure:4143: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4146: checking for $ac_word" >&5
+echo "configure:4174: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4190: checking for $ac_word" >&5
+echo "configure:4218: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4221: checking for $ac_word" >&5
+echo "configure:4249: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4260: checking for $ac_word" >&5
+echo "configure:4288: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4291: checking for $ac_word" >&5
+echo "configure:4319: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4330: checking for $ac_word" >&5
+echo "configure:4358: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4361: checking for $ac_word" >&5
+echo "configure:4389: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4405: checking for $ac_word" >&5
+echo "configure:4433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4436: checking for $ac_word" >&5
+echo "configure:4464: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4480: checking for $ac_word" >&5
+echo "configure:4508: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4511: checking for $ac_word" >&5
+echo "configure:4539: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4575: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4603: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4592: checking for $ac_word" >&5
+echo "configure:4620: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4623: checking for $ac_word" >&5
+echo "configure:4651: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4666: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4694: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4683: checking for $ac_word" >&5
+echo "configure:4711: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4714: checking for $ac_word" >&5
+echo "configure:4742: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4757: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4785: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4774: checking for $ac_word" >&5
+echo "configure:4802: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4805: checking for $ac_word" >&5
+echo "configure:4833: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4843: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4871: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4860: checking for $ac_word" >&5
+echo "configure:4888: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4891: checking for $ac_word" >&5
+echo "configure:4919: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4934: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4962: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4951: checking for $ac_word" >&5
+echo "configure:4979: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4982: checking for $ac_word" >&5
+echo "configure:5010: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5089: checking for ar in $with_build_time_tools" >&5
+echo "configure:5117: checking for ar in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ar; then
AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5107: checking for $ac_word" >&5
+echo "configure:5135: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5144: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5172: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5161: checking for $ac_word" >&5
+echo "configure:5189: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5192: checking for $ac_word" >&5
+echo "configure:5220: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5242: checking for as in $with_build_time_tools" >&5
+echo "configure:5270: checking for as in $with_build_time_tools" >&5
if test -x $with_build_time_tools/as; then
AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5260: checking for $ac_word" >&5
+echo "configure:5288: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5297: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5325: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5314: checking for $ac_word" >&5
+echo "configure:5342: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5345: checking for $ac_word" >&5
+echo "configure:5373: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5395: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5423: checking for dlltool in $with_build_time_tools" >&5
if test -x $with_build_time_tools/dlltool; then
DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5413: checking for $ac_word" >&5
+echo "configure:5441: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5450: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5478: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5467: checking for $ac_word" >&5
+echo "configure:5495: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5498: checking for $ac_word" >&5
+echo "configure:5526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5548: checking for ld in $with_build_time_tools" >&5
+echo "configure:5576: checking for ld in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ld; then
LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5566: checking for $ac_word" >&5
+echo "configure:5594: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5603: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5631: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5620: checking for $ac_word" >&5
+echo "configure:5648: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5651: checking for $ac_word" >&5
+echo "configure:5679: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5701: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5729: checking for lipo in $with_build_time_tools" >&5
if test -x $with_build_time_tools/lipo; then
LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5719: checking for $ac_word" >&5
+echo "configure:5747: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5756: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5784: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5773: checking for $ac_word" >&5
+echo "configure:5801: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5804: checking for $ac_word" >&5
+echo "configure:5832: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5854: checking for nm in $with_build_time_tools" >&5
+echo "configure:5882: checking for nm in $with_build_time_tools" >&5
if test -x $with_build_time_tools/nm; then
NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5872: checking for $ac_word" >&5
+echo "configure:5900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5909: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5937: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5926: checking for $ac_word" >&5
+echo "configure:5954: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5957: checking for $ac_word" >&5
+echo "configure:5985: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6007: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6035: checking for objdump in $with_build_time_tools" >&5
if test -x $with_build_time_tools/objdump; then
OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6025: checking for $ac_word" >&5
+echo "configure:6053: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6062: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6090: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6079: checking for $ac_word" >&5
+echo "configure:6107: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6110: checking for $ac_word" >&5
+echo "configure:6138: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6160: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6188: checking for ranlib in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ranlib; then
RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6178: checking for $ac_word" >&5
+echo "configure:6206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6215: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6243: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6232: checking for $ac_word" >&5
+echo "configure:6260: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6263: checking for $ac_word" >&5
+echo "configure:6291: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6313: checking for strip in $with_build_time_tools" >&5
+echo "configure:6341: checking for strip in $with_build_time_tools" >&5
if test -x $with_build_time_tools/strip; then
STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6331: checking for $ac_word" >&5
+echo "configure:6359: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6368: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6396: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6385: checking for $ac_word" >&5
+echo "configure:6413: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6416: checking for $ac_word" >&5
+echo "configure:6444: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6466: checking for windres in $with_build_time_tools" >&5
+echo "configure:6494: checking for windres in $with_build_time_tools" >&5
if test -x $with_build_time_tools/windres; then
WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6484: checking for $ac_word" >&5
+echo "configure:6512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6521: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6549: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6538: checking for $ac_word" >&5
+echo "configure:6566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6569: checking for $ac_word" >&5
+echo "configure:6597: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6617: checking where to find the target ar" >&5
+echo "configure:6645: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6650: checking where to find the target as" >&5
+echo "configure:6678: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6683: checking where to find the target cc" >&5
+echo "configure:6711: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6716: checking where to find the target c++" >&5
+echo "configure:6744: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6752: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6780: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6788: checking where to find the target dlltool" >&5
+echo "configure:6816: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6821: checking where to find the target gcc" >&5
+echo "configure:6849: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6854: checking where to find the target gcj" >&5
+echo "configure:6882: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6890: checking where to find the target gfortran" >&5
+echo "configure:6918: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6926: checking where to find the target ld" >&5
+echo "configure:6954: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6959: checking where to find the target lipo" >&5
+echo "configure:6987: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:6982: checking where to find the target nm" >&5
+echo "configure:7010: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7015: checking where to find the target objdump" >&5
+echo "configure:7043: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7048: checking where to find the target ranlib" >&5
+echo "configure:7076: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7081: checking where to find the target strip" >&5
+echo "configure:7109: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7114: checking where to find the target windres" >&5
+echo "configure:7142: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7175: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7203: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
esac
+# Flags needed to enable html installing and building
+# Check whether --with-datarootdir or --without-datarootdir was given.
+if test "${with_datarootdir+set}" = set; then
+ withval="$with_datarootdir"
+ datarootdir="\${prefix}/${withval}"
+else
+ datarootdir="\${prefix}/share"
+fi
+
+
+# Check whether --with-docdir or --without-docdir was given.
+if test "${with_docdir+set}" = set; then
+ withval="$with_docdir"
+ docdir="\${prefix}/${withval}"
+else
+ docdir="\${datarootdir}/doc"
+fi
+
+
+# Check whether --with-htmldir or --without-htmldir was given.
+if test "${with_htmldir+set}" = set; then
+ withval="$with_htmldir"
+ htmldir="\${prefix}/${withval}"
+else
+ htmldir="\${docdir}"
+fi
+
+
+
+
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@MAINT@%$MAINT%g
s%@stage1_cflags@%$stage1_cflags%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
+s%@datarootdir@%$datarootdir%g
+s%@docdir@%$docdir%g
+s%@htmldir@%$htmldir%g
CEOF
EOF
OSDN Git Service
