# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
+###
+# AC_PROG_CPP_WERROR
+# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
+# triggers warnings from the preprocessor. Will be in autoconf 2.58.
+# For now, using this also overrides header checks to use only the
+# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
+# bit harder from here).
+# Eventually autoconf will default to checking headers with the compiler
+# instead, and we'll have to do this differently.
+
+# AC_PROG_CPP_WERROR
+
### we might need to use some other shell than /bin/sh for running subshells
### If we are on Windows, search for the shell. This will permit people
# if PWD already has a value, it is probably wrong.
if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
-# Export original configure arguments for use by sub-configures.
-TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+# Export original configure arguments for use by sub-configures. These
+# will be expanded by make, so quote '$'.
+tmp="$progname $@"
+sed -e 's,\$,$$,g' <<EOF_SED > conftestsed.out
+$tmp
+EOF_SED
+TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out`
+rm -f conftestsed.out
moveifchange=${srcdir}/move-if-change
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+if test x"${with_headers}" != x && test x"${with_headers} != xno \
+ && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- *-*-darwin*)
+ powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
noconfigdirs="$noconfigdirs target-libobjc"
;;
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+ ;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*) ;;
esac
;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+ ;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- alpha*-*-freebsd*)
+ alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
alpha*-*-*)
;;
ia64*-**-hpux*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+ noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[3456789]86-*-freebsd*)
+ i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
i[3456789]86-*-linux*)
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-headers is only supported when cross compiling
exit 1
# Handle --with-libs=XXX. If the value is not "yes", the contents of
# the name directories are copied to $(tooldir)/lib. Multiple directories
# are permitted.
-if test x"${with_libs}" != x ; then
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-libs is only supported when cross compiling
exit 1
# Base args. Strip norecursion, cache-file, srcdir, host, build,
# target and nonopt. These are the ones we might not want to pass
-# down to subconfigures.
-baseargs=`echo " ${ac_configure_args} " | \
- sed -e 's/ --no[^ ]* / /' \
- -e 's/ --c[a-z-]*[= ][^ ]* / /' \
- -e 's/ --sr[a-z-]*[= ][^ ]* / /' \
- -e 's/ --ho[a-z-]*[= ][^ ]* / /' \
- -e 's/ --bu[a-z-]*[= ][^ ]* / /' \
- -e 's/ --t[a-z-]*[= ][^ ]* / /' \
- -e 's/ -cache-file[= ][^ ]* / /' \
- -e 's/ -srcdir[= ][^ ]* / /' \
- -e 's/ -host[= ][^ ]* / /' \
- -e 's/ -build[= ][^ ]* / /' \
- -e 's/ -target[= ][^ ]* / /' \
- -e "s/ [^' -][^ ]* / /" \
- -e 's/^ *//;s/ *$//'`
+# down to subconfigures. Also strip program-prefix, program-suffix,
+# and program-transform-name, so that we can pass down a consistent
+# program-transform-name. If autoconf has put single quotes around
+# any of these arguments (because they contain shell metacharacters)
+# then this will fail; in practice this only happens for
+# --program-transform-name, so be sure to override --program-transform-name
+# at the end of the argument list.
+# These will be expanded by make, so quote '$'.
+cat <<\EOF_SED > conftestsed
+s/ --no[^ ]* / /
+s/ --c[a-z-]*[= ][^ ]* / /
+s/ --sr[a-z-]*[= ][^ ]* / /
+s/ --ho[a-z-]*[= ][^ ]* / /
+s/ --bu[a-z-]*[= ][^ ]* / /
+s/ --t[a-z-]*[= ][^ ]* / /
+s/ --program-[pst][a-z-]*[= ][^ ]* / /
+s/ -cache-file[= ][^ ]* / /
+s/ -srcdir[= ][^ ]* / /
+s/ -host[= ][^ ]* / /
+s/ -build[= ][^ ]* / /
+s/ -target[= ][^ ]* / /
+s/ -program-prefix[= ][^ ]* / /
+s/ -program-suffix[= ][^ ]* / /
+s/ -program-transform-name[= ][^ ]* / /
+s/ [^' -][^ ]* / /
+s/^ *//;s/ *$//
+s,\$,$$,g
+EOF_SED
+sed -f conftestsed <<EOF_SED > conftestsed.out
+ ${ac_configure_args}
+EOF_SED
+baseargs=`cat conftestsed.out`
+rm -f conftestsed conftestsed.out
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
cache_file_option="--cache-file=../${cache_file}" ;;
esac
-host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
target_configargs=${baseargs}
target_configargs="--with-newlib ${target_configargs}"
fi
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
+
# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
;;
esac
+# Allow the user to override the flags for
+# our build compiler if desired.
+CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+
# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# flags for directories within the install tree of the compiler
# Don't use libstdc++-v3's flags to configure/build itself.
libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
if test "x${CXX_FOR_TARGET+set}" = xset; then
- :
+ if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+ fi
elif test -d ${srcdir}/gcc; then
# We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
# of g++ for linking C++ or Java, because g++ has -shared-libgcc by
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2766: checking for $ac_word" >&5
+echo "configure:2841: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2799: checking for $ac_word" >&5
+echo "configure:2874: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2838: checking for $ac_word" >&5
+echo "configure:2913: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2871: checking for $ac_word" >&5
+echo "configure:2946: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2910: checking for $ac_word" >&5
+echo "configure:2985: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2943: checking for $ac_word" >&5
+echo "configure:3018: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2982: checking for $ac_word" >&5
+echo "configure:3057: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3015: checking for $ac_word" >&5
+echo "configure:3090: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3054: checking for $ac_word" >&5
+echo "configure:3129: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3087: checking for $ac_word" >&5
+echo "configure:3162: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3126: checking for $ac_word" >&5
+echo "configure:3201: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3159: checking for $ac_word" >&5
+echo "configure:3234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3198: checking for $ac_word" >&5
+echo "configure:3273: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3231: checking for $ac_word" >&5
+echo "configure:3306: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3270: checking for $ac_word" >&5
+echo "configure:3345: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3303: checking for $ac_word" >&5
+echo "configure:3378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3342: checking for $ac_word" >&5
+echo "configure:3417: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3375: checking for $ac_word" >&5
+echo "configure:3450: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
# Target tools.
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3423: checking for $ac_word" >&5
+echo "configure:3499: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3456: checking for $ac_word" >&5
+echo "configure:3532: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3495: checking for $ac_word" >&5
+echo "configure:3571: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3528: checking for $ac_word" >&5
+echo "configure:3604: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3567: checking for $ac_word" >&5
+echo "configure:3643: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_word" >&5
+echo "configure:3676: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3639: checking for $ac_word" >&5
+echo "configure:3715: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3672: checking for $ac_word" >&5
+echo "configure:3748: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3711: checking for $ac_word" >&5
+echo "configure:3787: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3744: checking for $ac_word" >&5
+echo "configure:3820: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3783: checking for $ac_word" >&5
+echo "configure:3859: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3816: checking for $ac_word" >&5
+echo "configure:3892: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3855: checking for $ac_word" >&5
+echo "configure:3931: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3888: checking for $ac_word" >&5
+echo "configure:3964: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3955: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4031: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
+s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
s%@DEFAULT_YACC@%$DEFAULT_YACC%g
s%@DEFAULT_LEX@%$DEFAULT_LEX%g
s%@DEFAULT_M4@%$DEFAULT_M4%g
OSDN Git Service
