ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
+ --enable-libssp Builds libssp directory"
+ac_help="$ac_help
+ --with-mpfr-dir=PATH Specify source directory for MPFR library"
+ac_help="$ac_help
+ --with-mpfr=PATH Specify directory for installed MPFR library"
+ac_help="$ac_help
+ --with-gmp-dir=PATH Specify source directory for GMP library"
+ac_help="$ac_help
+ --with-gmp=PATH Specify directory for installed GMP library"
+ac_help="$ac_help
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build"
+ac_help="$ac_help
+ --enable-bootstrap[=lean] Enable bootstrapping [no]"
+ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
sub-packages for the host, target or build
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-werror enable -Werror in bootstrap stage2 and later"
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:583: checking host system type" >&5
+echo "configure:600: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:604: checking target system type" >&5
+echo "configure:621: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:622: checking build system type" >&5
+echo "configure:639: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:677: checking for a BSD compatible install" >&5
+echo "configure:694: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+echo $ac_n "checking whether ln works""... $ac_c" 1>&6
+echo "configure:747: checking whether ln works" >&5
+if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
-
-
-
-
-
-####
-# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
-
-####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
-
-
-
-####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
-
-
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
-
-
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor. Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
+fi
+if test $acx_cv_prog_LN = no; then
+ LN="cp"
+ echo "$ac_t""no, using $LN" 1>&6
+else
+ LN="$acx_cv_prog_LN"
+ echo "$ac_t""yes" 1>&6
+fi
-# AC_PROG_CPP_WERROR
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:771: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
### we might need to use some other shell than /bin/sh for running subshells
moveifchange=${srcdir}/move-if-change
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+
+# We pass INSTALL explicitly to sub-makes. Make sure that it is not
+# a relative path.
+if test "$INSTALL" = "${srcdir}/install-sh -c"; then
+ INSTALL="${srcpwd}/install-sh -c"
+fi
+
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
-srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
srcdir=.
fi
topsrcdir=$srcpwd
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-if test "${with_gcc_version_trigger+set}" = set ; then
- gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
- # If gcc's sources are available, define the trigger file.
- if test -f ${topsrcdir}/gcc/version.c ; then
- gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
- fi
-fi
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
# Double entries in build_configdirs, configdirs, or target_configdirs may
# cause circular dependencies and break everything horribly.
+# these library is used by various programs built for the build
+# environment
+#
+build_libs="build-libiberty"
+
+# these tools are built for the build environment
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-libgloss \
target-newlib \
target-libstdc++-v3 \
- target-libf2c \
+ target-libmudflap \
+ target-libssp \
+ target-libgfortran \
${libgcj} \
target-libobjc \
target-libada"
## is important because configure will choke if they ever get through.
## ${configdirs} is directories we build using the host tools.
## ${target_configdirs} is directories we build using the target tools.
-#
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
- # This is the only build module.
- build_modules=libiberty
-else
- build_modules=
-fi
-
+build_configdirs=`echo ${build_libs} ${build_tools}`
################################################################################
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
no)
- skipdirs="${skipdirs} tk tix itcl libgui"
+ skipdirs="${skipdirs} tk itcl libgui"
# We won't be able to build gdbtk without X.
enable_gdbtk=no
;;
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_headers} != xno \
- && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno \
+ && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
configdirs="$configdirs libtermcap" ;;
esac
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
noconfigdirs="$noconfigdirs byacc"
;;
i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+ noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
;;
i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+ noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
i[3456789]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb"
;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
noconfigdirs="$noconfigdirs rcs"
;;
ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+ noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
- ;;
- *-*-darwin*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
esac
+
# Check whether --enable-libada or --disable-libada was given.
if test "${enable_libada+set}" = set; then
enableval="$enable_libada"
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
+ noconfigdirs="$noconfigdirs gnattools"
+fi
+
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi
+
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
;;
esac
+
+# Allow --disable-libmudflap to exclude target-libmudflap
+case $enable_libmudflap in
+yes)
+ ;;
+no)
+ noconfigdirs="$noconfigdirs target-libmudflap"
+ ;;
+"")
+ case "${target}" in
+ *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+ # Enable libmudflap by default in GNU and friends.
+ ;;
+ *-*-freebsd*)
+ # Enable libmudflap by default in FreeBSD.
+ ;;
+ *)
+ # Disable it by default everywhere else.
+ noconfigdirs="$noconfigdirs target-libmudflap"
+ ;;
+ esac
+esac
+
+
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
+ *-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
+ && test -f /usr/local/include/gmp.h; then
+ with_gmp=/usr/local
+ fi
+
+ # Skip some stuff that's unsupported on some FreeBSD configurations.
+ case "${target}" in
+ i*86-*-*) ;;
+ alpha*-*-*) ;;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
+ skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
esac
;;
- *-*-netware)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- case ${target} in
- h8300*-*-* | h8500-*-*)
- noconfigdirs="$noconfigdirs target-libf2c"
- ;;
- *) ;;
- esac
+ ;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
;;
+ m32c-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready. I'm not sure about fileutils.
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
- noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ arm-semi-aof )
+ ;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+ arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
- arm-*-oabi*)
+ arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-coff)
thumb-*-elf)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
thumb-*-pe)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
- cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-aout)
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ *-*-elf)
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
+ *)
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ esac
+ ;;
+ crx-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ ;;
+ hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
+ parisc*-*-linux* | hppa*-*-linux*)
+ ;;
hppa*-*-*elf* | \
- parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ ;;
+ i370-*-opened*)
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
i[3456789]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
# not build java stuff by default.
# Can't build gdb for mingw32 if not native.
case "${host}" in
i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
;;
esac
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
- # always build newlib.
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ # always build newlib if winsup directory is present.
+ if test -d "$srcdir/winsup"; then
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ elif test -d "$srcdir/newlib"; then
+ echo "Warning: winsup is missing so newlib can't be built."
+ fi
# Can't build gdb for Cygwin if not native.
case "${host}" in
*-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
;;
esac
;;
+ i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
+ i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
+ ;;
i[3456789]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages f95 java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ ms1-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+ ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
mips*-*-irix5*)
- # The GNU linker does not support shared libraries.
- noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-irix6*)
# Linking libjava exceeds command-line length limits on at least
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-*)
+ sh-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
use_gnu_ld=no
fi
;;
+ sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-linux*)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# Figure out what language subdirectories are present.
-# Look if the user specified --enable-languages="..."; if not, use
-# the environment variable $LANGUAGES if defined. $LANGUAGES might
-# go away some day.
-# NB: embedded tabs in this IF block -- do not untabify
-if test x"${enable_languages+set}" != xset; then
- if test x"${LANGUAGES+set}" = xset; then
- enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
- else
- enable_languages=all
- fi
-else
- if test x"${enable_languages}" = x ||
- test x"${enable_languages}" = xyes;
- then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
- exit 1
- fi
-fi
-enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
-
-# First scan to see if an enabled language requires some other language.
-# We assume that a given config-lang.in will list all the language
-# front ends it requires, even if some are required indirectly.
-for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $lang_requires
- language=
- lang_requires=
- . ${lang_frag}
- for other in ${lang_requires} ; do
- case ,${enable_languages}, in
- *,$other,*) ;;
- *,all,*) ;;
- *,$language,*)
- echo " \`$other' language required by \`$language'; enabling" 1>&2
- enable_languages="${enable_languages},${other}"
- ;;
- esac
- done
- ;;
- esac
-done
-
-for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $target_libs,
- # $lang_dirs, and $build_by_default
- language=
- target_libs=
- lang_dirs=
- build_by_default=
- . ${lang_frag}
- if test "x$language" = x ; then
- echo "${lang_frag} doesn't set \$language." 1>&2
- exit 1
- fi
- case ,${enable_languages}, in
- *,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
- ;;
- *,all,*)
- # 'all' was selected; include 'default' languages.
- case ${build_by_default} in
- no) add_this_lang=no ;;
- *) add_this_lang=yes ;;
- esac
- ;;
- *) add_this_lang=no ;;
- esac
- case ${add_this_lang} in
- no)
- # Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
- ;;
- esac
- ;;
- esac
-done
-
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
-# If we have the source for $noconfigdirs entries, add them to $notsupp.
-
-notsupp=""
-for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g`
- if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
- if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
-done
-
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-if test -n "${target_configdirs}" ; then
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
- fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=
- fi
-fi
-
-# Quietly strip out all directories which aren't configurable in this tree.
-# This relies on all configurable subdirectories being autoconfiscated, which
-# is now the case.
-configdirs_all="$configdirs"
-configdirs=
-for i in ${configdirs_all} ; do
- if test -f ${srcdir}/$i/configure ; then
- configdirs="${configdirs} $i"
- fi
-done
-target_configdirs_all="$target_configdirs"
-target_configdirs=
-for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
- if test -f ${srcdir}/$j/configure ; then
- target_configdirs="${target_configdirs} $i"
- fi
-done
-
-# Produce a warning message for the subdirs we can't configure.
-# This isn't especially interesting in the Cygnus tree, but in the individual
-# FSF releases, it's important to let people know when their machine isn't
-# supported by the one or two programs in a package.
-
-if test -n "${notsupp}" && test -z "${norecursion}" ; then
- # If $appdirs is non-empty, at least one of those directories must still
- # be configured, or we error out. (E.g., if the gas release supports a
- # specified target in some subdirs but not the gas subdir, we shouldn't
- # pretend that all is well.)
- if test -n "$appdirs" ; then
- for dir in $appdirs ; do
- if test -r $dir/Makefile.in ; then
- if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- fi
- done
- if test -n "$appdirs" ; then
- echo "*** This configuration is not supported by this package." 1>&2
- exit 1
- fi
- fi
- # Okay, some application will build, or we don't care to check. Still
- # notify of subdirs not getting built.
- echo "*** This configuration is not supported in the following subdirectories:" 1>&2
- echo " ${notsupp}" 1>&2
- echo " (Any other directories should still work fine.)" 1>&2
-fi
-
-case "$host" in
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-
-copy_dirs=
-
-# Handle --with-headers=XXX. If the value is not "yes", the contents of
-# the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-headers is only supported when cross compiling
- exit 1
- fi
- if test x"${with_headers}" != xyes ; then
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
- fi
-fi
-
-# Handle --with-libs=XXX. If the value is not "yes", the contents of
-# the name directories are copied to $(tooldir)/lib. Multiple directories
-# are permitted.
-if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-libs is only supported when cross compiling
- exit 1
- fi
- if test x"${with_libs}" != xyes ; then
- # Copy the libraries in reverse order, so that files in the first named
- # library override files in subsequent libraries.
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- for l in ${with_libs}; do
- copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
- done
- fi
-fi
-
-# Handle ${copy_dirs}
-set fnord ${copy_dirs}
-shift
-while test $# != 0 ; do
- if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
- :
- else
- echo Copying $1 to $2
-
- # Use the install script to create the directory and all required
- # parent directories.
- if test -d $2 ; then
- :
- else
- echo >config.temp
- ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
- fi
-
- # Copy the directory, assuming we have tar.
- # FIXME: Should we use B in the second tar? Not all systems support it.
- (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
-
- # It is the responsibility of the user to correctly adjust all
- # symlinks. If somebody can figure out how to handle them correctly
- # here, feel free to add the code.
-
- echo $1 > $2/COPIED
- fi
- shift; shift
-done
-
-# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
-host_makefile_frag=/dev/null
-if test -d ${srcdir}/config ; then
-case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
+# Work in distributions that contain no compiler tools, like Autoconf.
+tentative_cc=""
+host_makefile_frag=/dev/null
+if test -d ${srcdir}/config ; then
+case "${host}" in
+ m68k-hp-hpux*)
+ # Avoid "too much defining" errors from HPUX compiler.
+ tentative_cc="cc -Wp,-H256000"
+ # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
+ # If it's HP/UX ar, this should be harmless.
+ RANLIB="ar ts"
+ ;;
+ m68k-apollo-sysv*)
+ tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
+ ;;
+ m68k-apollo-bsd*)
+ #None of the Apollo compilers can compile gas or binutils. The preprocessor
+ # chokes on bfd, the compiler won't let you assign integers to enums, and
+ # other problems. Defining CC to gcc is a questionable way to say "don't use
+ # the apollo compiler" (the preferred version of GCC could be called cc,
+ # or whatever), but I'm not sure leaving CC as cc is any better...
+ #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
+ # Used to have BISON=yacc.
+ tentative_cc=gcc
+ ;;
+ m88k-dg-dgux*)
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ ;;
+ m88k-harris-cxux*)
+ # Under CX/UX, we want to tell the compiler to use ANSI mode.
+ tentative_cc="cc -Xa"
+ host_makefile_frag="config/mh-cxux"
+ ;;
+ m88k-motorola-sysv*)
+ ;;
+ mips*-dec-ultrix*)
+ tentative_cc="cc -Wf,-XNg1000"
+ host_makefile_frag="config/mh-decstation"
+ ;;
+ mips*-nec-sysv4*)
+ # The C compiler on NEC MIPS SVR4 needs bigger tables.
+ tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
+ host_makefile_frag="config/mh-necv4"
+ ;;
+ mips*-sgi-irix4*)
+ # Tell compiler to use K&R C. We can't compile under the SGI Ansi
+ # environment. Also bump switch table size so that cp-parse will
+ # compile. Bump string length limit so linker builds.
+ tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="config/mh-sysv4"
+ ;;
+ mips*-*-sysv*)
+ # This is for a MIPS running RISC/os 4.52C.
# This is needed for GDB, but needs to be in the top-level make because
# if a library is compiled with the bsd headers and gets linked with the
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
+ powerpc-*-darwin*)
+ host_makefile_frag="config/mh-ppc-darwin"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
*-*-sysv4*)
host_makefile_frag="config/mh-sysv4"
;;
+ # This is placed last to prevent interfering with the cases above.
+ i[3456789]86-*-*)
+ # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
+ host_makefile_frag="config/mh-x86omitfp"
+ ;;
esac
fi
-extra_arflags_for_target=
-extra_nmflags_for_target=
-extra_ranlibflags_for_target=
-target_makefile_frag=/dev/null
-case "${target}" in
- i[3456789]86-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- powerpc-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- *-*-linux*)
- target_makefile_frag="config/mt-linux"
- ;;
- *-*-aix4.[3456789]* | *-*-aix[56789].*)
- # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
- # commands to handle both 32-bit and 64-bit objects. These flags are
- # harmless if we're using GNU nm or ar.
- extra_arflags_for_target=" -X32_64"
- extra_nmflags_for_target=" -B -X32_64"
- ;;
- *-*-darwin*)
- # ranlib from Darwin requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
-esac
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ found=
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ found=yes
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
+ CC=$tentative_cc
+ fi
+fi
-alphaieee_frag=/dev/null
-case $target in
- alpha*-*-*)
- # This just makes sure to use the -mieee option to build target libs.
- # This should probably be set individually by each library.
- alphaieee_frag="config/mt-alphaieee"
- ;;
-esac
+if test "${build}" != "${host}" ; then
+ # If we are doing a Canadian Cross, in which the host and build systems
+ # are not the same, we set reasonable default values for the tools.
-# If --enable-target-optspace always use -Os instead of -O2 to build
-# the target libraries, similarly if it is not specified, use -Os
-# on selected platforms.
-ospace_frag=/dev/null
-case "${enable_target_optspace}:${target}" in
- yes:*)
- ospace_frag="config/mt-ospace"
- ;;
- :d30v-*)
- ospace_frag="config/mt-d30v"
- ;;
- :m32r-* | :d10v-* | :fr30-*)
- ospace_frag="config/mt-ospace"
- ;;
- no:* | :*)
- ;;
- *)
- echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
- ;;
-esac
+ CC=${CC-${host_alias}-gcc}
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXX=${CXX-${host_alias}-c++}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
+else
+ # Set reasonable default values for some tools even if not Canadian.
+ # Of course, these are different reasonable default values, originally
+ # specified directly in the Makefile.
+ # We don't export, so that autoconf can do its job.
+ # Note that all these settings are above the fragment inclusion point
+ # in Makefile.in, so can still be overridden by fragments.
+ # This is all going to change when we autoconfiscate...
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
+ CC_FOR_BUILD="\$(CC)"
+ BUILD_PREFIX=
+ BUILD_PREFIX_1=loser-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1815: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
fi
-
-
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix[56]*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
- esac
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
- ;;
-esac
-
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1845: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
break
fi
done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
fi
fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# Some systems (e.g., one of the i386-aix systems the gas testers are
-# using) don't handle "\$" correctly, so don't use it here.
-tooldir='${exec_prefix}'/${target_alias}
-build_tooldir=${tooldir}
-
-# Generate a default definition for YACC. This is used if the makefile can't
-# locate bison or byacc in objdir.
-
-for prog in 'bison -y' byacc yacc
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_YACC="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_YACC" && break
-done
-
-# Generate a default definition for M4. This is used if the makefile can't
-# locate m4 in objdir.
-
-for prog in gm4 gnum4 m4
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_M4="$prog"
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1896: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
break
fi
done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_M4" && break
-done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
-# Generate a default definition for LEX. This is used if the makefile can't
-# locate flex in objdir.
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1928: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-for prog in flex lex
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_LEX="$prog"
- break
- fi
- done
- IFS="$save_ifs"
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
- test -n "$DEFAULT_LEX" && break
-done
+cat > conftest.$ac_ext << EOF
-if test "${build}" != "${host}" ; then
- # If we are doing a Canadian Cross, in which the host and build systems
- # are not the same, we set reasonable default values for the tools.
+#line 1939 "configure"
+#include "confdefs.h"
- BISON=${BISON-bison}
- CC=${CC-${host_alias}-gcc}
- CFLAGS=${CFLAGS-"-g -O2"}
- CXX=${CXX-${host_alias}-c++}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- BUILD_PREFIX=${build_alias}-
- BUILD_PREFIX_1=${build_alias}-
- MAKEINFO=${MAKEINFO-makeinfo}
-
- if test -z "${YACC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/bison; then
- YACC="bison -y"
- break
- fi
- if test -f $dir/byacc; then
- YACC=byacc
- break
- fi
- if test -f $dir/yacc; then
- YACC=yacc
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${YACC}" ; then
- YACC="bison -y"
- fi
+main(){return(0);}
+EOF
+if { (eval echo configure:1944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
- if test -z "${LEX}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/flex; then
- LEX=flex
- break
- fi
- if test -f $dir/lex; then
- LEX=lex
- break
- fi
- done
- IFS="$save_ifs"
- LEX=${LEX-flex}
- fi
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1970: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1975: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- # Set reasonable default values for some tools even if not Canadian.
- # Of course, these are different reasonable default values, originally
- # specified directly in the Makefile.
- # We don't export, so that autoconf can do its job.
- # Note that all these settings are above the fragment inclusion point
- # in Makefile.in, so can still be overridden by fragments.
- # This is all going to change when we autoconfiscate...
-
- BISON="\$(USUAL_BISON)"
- CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- BUILD_PREFIX=
- BUILD_PREFIX_1=loser-
- MAKEINFO="\$(USUAL_MAKEINFO)"
- LEX="\$(USUAL_LEX)"
- YACC="\$(USUAL_YACC)"
-
- # If CC is still not set, try to get gcc.
- cc_prog_is_gcc=
- if test -z "${CC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- CC="gcc"
- cc_prog_is_gcc=yes
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- break
- fi
- done
- IFS="$save_ifs"
- CC=${CC-cc}
- else
- # Determine if we are using gcc.
- cat > conftest.c <<EOF
+ cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
- if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
- cc_prog_is_gcc=yes
- fi
- rm -f conftest.c
- if test -z "${CFLAGS}"; then
- # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
- # is set to a version of gcc.
- if test "$cc_prog_is_gcc" = yes; then
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- fi
- fi
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2003: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
fi
+fi
+
# We must set the default linker to the linker used by gcc for the correct
# operation of libtool. If LD is not defined and we are using gcc, try to
# set the LD default to the ld used by gcc.
if test -z "$LD"; then
- if test "$cc_prog_is_gcc" = yes; then
+ if test "$GCC" = yes; then
case $build in
*-*-mingw*)
gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
CXXFLAGS=${CXXFLAGS-"-g -O2"}
fi
-# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-# Make the links.
-configlinks="${links}"
-if test -r ./config.status ; then
- mv -f ./config.status ./config.back
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
fi
-while test -n "${files}" ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if test ! -r ${srcdir}/${file} ; then
- if test ! -r ${file} ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
- exit 1
- else
- srcfile=${file}
- fi
- else
- srcfile=${srcdir}/${file}
- fi
- ${remove} -f ${link}
- # Make a symlink if possible, otherwise try a hard link
- if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
- true
- else
- # We need to re-remove the file because Lynx leaves a
- # very strange directory there when it fails an NFS symlink.
- ${remove} -r -f ${link}
- ${hard_link} ${srcfile} ${link}
- fi
- if test ! -r ${link} ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
- exit 1
- fi
- echo "Linked \"${link}\" to \"${srcfile}\"."
-done
-# Create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
+# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2070: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-if test -r ${srcdir}/.gdbinit ; then
- case ${srcdir} in
- .) ;;
- *) cat > ./.gdbinit <<EOF
-# ${NO_EDIT}
-dir ${srcdir}
-dir .
-source ${srcdir}/.gdbinit
+
+if test -z "$ac_cv_prog_GNATBIND"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2102: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
+fi
+fi
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ GNATBIND="no"
+fi
+fi
+
+echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
+echo "configure:2135: checking whether compiler driver understands Ada" >&5
+if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
EOF
- ;;
- esac
+acx_cv_cc_gcc_supports_ada=no
+# There is a bug in old released versions of GCC which causes the
+# driver to exit successfully when the appropriate language module
+# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+# Therefore we must check for the error message as well as an
+# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
+errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
+if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_cc_gcc_supports_ada=yes
+fi
+rm -f conftest.*
fi
-# Make sure that the compiler is able to generate an executable. If it
-# can't, we are probably in trouble. We don't care whether we can run the
-# executable--we might be using a cross compiler--we only care whether it
-# can be created. At this point the main configure script has set CC.
-we_are_ok=no
-echo "int main () { return 0; }" > conftest.c
-${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
-if test $? = 0 ; then
- if test -s conftest || test -s conftest.exe ; then
- we_are_ok=yes
+echo "$ac_t""$acx_cv_cc_gcc_supports_ada" 1>&6
+
+if test x$GNATBIND != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
+
+echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
+echo "configure:2167: checking how to compare bootstrapped objects" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
+ fi
fi
-fi
-case $we_are_ok in
- no)
- echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
- echo 1>&2 "*** You must set the environment variable CC to a working compiler."
- rm -f conftest*
- exit 1
- ;;
-esac
-rm -f conftest*
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
+ fi
+ fi
+ rm t1 t2
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
- sparc-sun-solaris2*)
- CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
- could_use=
- test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
- if test -d /opt/cygnus/bin ; then
- if test "$could_use" = "" ; then
- could_use="/opt/cygnus/bin"
- else
- could_use="$could_use or /opt/cygnus/bin"
- fi
- fi
- if test "$could_use" = "" ; then
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc. You should change your PATH or CC "
- echo "variable and rerun configure."
- else
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc, when you should use the C compiler from"
- echo "$could_use. You should change your"
- echo "PATH or CC variable and rerun configure."
- fi
- fi
- ;;
-esac
+fi
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${enable_shared}" in
- no | "") SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
+echo "$ac_t""$gcc_cv_prog_cmp_skip" 1>&6
+do_compare="$gcc_cv_prog_cmp_skip"
-case "${host}" in
- *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
-esac
-# Record target_configdirs and the configure arguments for target and
-# build configuration in Makefile.
-target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-# This is the final value for target_configdirs. configdirs already
-# has its final value, as does build_modules. It's time to create some
-# lists of valid targets.
+# Check for GMP and MPFR
+gmplibs=
+gmpinc=
+have_gmp=yes
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+# Check whether --with-mpfr-dir or --without-mpfr-dir was given.
+if test "${with_mpfr_dir+set}" = set; then
+ withval="$with_mpfr_dir"
+ :
+fi
-all_build_modules=
-configure_build_modules=
-for module in ${build_modules} ; do
- all_build_modules=all-build-${module}
- configure_build_modules=configure-build-${module}
-done
-# Determine whether gdb needs tk/tcl or not.
-# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
-# and in that case we want gdb to be built without tk. Ugh!
-# In fact I believe gdb is the *only* package directly dependent on tk,
-# so we should be able to put the 'maybe's in unconditionally and
-# leave out the maybe dependencies when enable_gdbtk is false. I'm not
-# 100% sure that that's safe though.
+if test "x$with_mpfr_dir" != x; then
+ gmpinc="-I$with_mpfr_dir"
+ gmplibs="$with_mpfr_dir/libmpfr.a"
+else
+ gmplibs="-lmpfr"
+fi
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
-case "$enable_gdbtk" in
- no)
- GDB_TK="" ;;
- yes)
- GDB_TK="${gdb_tk}" ;;
- *)
- # Only add the dependency on gdbtk when GDBtk is part of the gdb
- # distro. Eventually someone will fix this and move Insight, nee
- # gdbtk to a separate directory.
- if test -d ${srcdir}/gdb/gdbtk ; then
- GDB_TK="${gdb_tk}"
- else
- GDB_TK=""
- fi
- ;;
-esac
+# Check whether --with-mpfr or --without-mpfr was given.
+if test "${with_mpfr+set}" = set; then
+ withval="$with_mpfr"
+ :
+fi
-# Create the 'maybe dependencies'. This uses a temporary file.
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, so that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
-rm -f maybedep.tmp
-echo '# maybedep.tmp' > maybedep.tmp
+if test "x$with_mpfr" != x; then
+ gmplibs="-L$with_mpfr/lib $gmplibs"
+ gmpinc="-I$with_mpfr/include"
+fi
+
+# Specify a location for gmp
+# Check whether --with-gmp-dir or --without-gmp-dir was given.
+if test "${with_gmp_dir+set}" = set; then
+ withval="$with_gmp_dir"
+ :
+fi
-# Make-targets which may need maybe dependencies.
-mts="configure all install check clean distclean dvi info install-info"
-mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
-# Loop over modules and make-targets.
-for module in ${build_modules} ; do
- if test -z "${no_recursion}" \
- && test -f ${build_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${build_subdir}/${module}/Makefile
- fi
- for mt in ${mts} ; do
- case ${mt} in
- install) ;; # No installing build modules.
- *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
- esac
- done
-done
-for module in ${configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
- fi
- for mt in ${mts} ; do
- echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
- done
-done
-for module in ${target_configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${target_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${target_subdir}/${module}/Makefile
+if test "x$with_gmp_dir" != x; then
+ gmpinc="$gmpinc -I$with_gmp_dir"
+ if test -f "$with_gmp_dir/.libs/libgmp.a"; then
+ gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
+ elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
+ gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
fi
- for mt in ${mts} ; do
- echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
- done
-done
-maybe_dependencies=maybedep.tmp
+ # One of the later tests will catch the error if neither library is present.
+else
+ gmplibs="$gmplibs -lgmp"
+fi
+# Check whether --with-gmp or --without-gmp was given.
+if test "${with_gmp+set}" = set; then
+ withval="$with_gmp"
+ :
+fi
-# Create the serialization dependencies. This uses a temporary file.
-# Check whether --enable-serial-configure or --disable-serial-configure was given.
-if test "${enable_serial_configure+set}" = set; then
- enableval="$enable_serial_configure"
- :
+if test "x$with_gmp" != x; then
+ gmplibs="-L$with_gmp/lib $gmplibs"
+ gmpinc="-I$with_gmp/include $gmpinc"
fi
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $gmpinc"
+# Check GMP actually works
+echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
+echo "configure:2265: checking for correct version of gmp.h" >&5
+cat > conftest.$ac_ext <<EOF
+#line 2267 "configure"
+#include "confdefs.h"
+#include "gmp.h"
+int main() {
-case ${enable_serial_configure} in
- yes)
- enable_serial_build_configure=yes
- enable_serial_host_configure=yes
- enable_serial_target_configure=yes
- ;;
-esac
+#if __GNU_MP_VERSION < 3
+choke me
+#endif
-# These force 'configure's to be done one at a time, to avoid problems
-# with contention over a shared config.cache.
-rm -f serdep.tmp
-echo '# serdep.tmp' > serdep.tmp
-olditem=
-test "x${enable_serial_build_configure}" = xyes &&
-for item in ${build_configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-olditem=
-test "x${enable_serial_host_configure}" = xyes &&
-for item in ${configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-olditem=
-test "x${enable_serial_target_configure}" = xyes &&
-for item in ${target_configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-serialization_dependencies=serdep.tmp
+; return 0; }
+EOF
+if { (eval echo configure:2278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6; have_gmp=no
+fi
+rm -f conftest*
+if test x"$have_gmp" = xyes; then
+ echo $ac_n "checking for MPFR""... $ac_c" 1>&6
+echo "configure:2291: checking for MPFR" >&5
+
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ cat > conftest.$ac_ext <<EOF
+#line 2296 "configure"
+#include "confdefs.h"
+#include <gmp.h>
+#include <mpfr.h>
+int main() {
+mpfr_t n; mpfr_init(n);
+; return 0; }
+EOF
+if { (eval echo configure:2304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6; have_gmp=no
+fi
+rm -f conftest*
+ LIBS="$saved_LIBS"
+ CFLAGS="$saved_CFLAGS"
+fi
-# Base args. Strip norecursion, cache-file, srcdir, host, build,
-# target and nonopt. These are the ones we might not want to pass
-# down to subconfigures. Also strip program-prefix, program-suffix,
-# and program-transform-name, so that we can pass down a consistent
-# program-transform-name. If autoconf has put single quotes around
-# any of these arguments (because they contain shell metacharacters)
-# then this will fail; in practice this only happens for
-# --program-transform-name, so be sure to override --program-transform-name
-# at the end of the argument list.
-# These will be expanded by make, so quote '$'.
-cat <<\EOF_SED > conftestsed
-s/ --no[^ ]* / /
-s/ --c[a-z-]*[= ][^ ]* / /
-s/ --sr[a-z-]*[= ][^ ]* / /
-s/ --ho[a-z-]*[= ][^ ]* / /
-s/ --bu[a-z-]*[= ][^ ]* / /
-s/ --t[a-z-]*[= ][^ ]* / /
-s/ --program-[pst][a-z-]*[= ][^ ]* / /
-s/ -cache-file[= ][^ ]* / /
-s/ -srcdir[= ][^ ]* / /
-s/ -host[= ][^ ]* / /
-s/ -build[= ][^ ]* / /
-s/ -target[= ][^ ]* / /
-s/ -program-prefix[= ][^ ]* / /
-s/ -program-suffix[= ][^ ]* / /
-s/ -program-transform-name[= ][^ ]* / /
-s/ [^' -][^ ]* / /
-s/^ *//;s/ *$//
-s,\$,$$,g
-EOF_SED
-sed -f conftestsed <<EOF_SED > conftestsed.out
- ${ac_configure_args}
-EOF_SED
-baseargs=`cat conftestsed.out`
-rm -f conftestsed conftestsed.out
+# Flags needed for both GMP and/or MPFR
-# Add in --program-transform-name, after --program-prefix and
-# --program-suffix have been applied to it. Autoconf has already
-# doubled dollar signs and backslashes in program_transform_name; we want
-# the backslashes un-doubled, and then the entire thing wrapped in single
-# quotes, because this will be expanded first by make and then by the shell.
-# Also, because we want to override the logic in subdir configure scripts to
-# choose program_transform_name, replace any s,x,x, with s,y,y,.
-sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
-${program_transform_name}
-EOF_SED
-gcc_transform_name=`cat conftestsed.out`
-rm -f conftestsed.out
-baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
-# For the build-side libraries, we just need to pretend we're native,
-# and not use the same cache file. Multilibs are neither needed nor
-# desired.
-build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
-# For host modules, accept cache file option, or specification as blank.
-case "${cache_file}" in
-"") # empty
- cache_file_option="" ;;
-/* | [A-Za-z]:[\\/]* ) # absolute path
- cache_file_option="--cache-file=${cache_file}" ;;
-*) # relative path
- cache_file_option="--cache-file=../${cache_file}" ;;
-esac
+# By default, C is the only stage 1 language.
+stage1_languages=c
-# Host dirs don't like to share a cache file either, horribly enough.
-# This seems to be due to autoconf 2.5x stupidity.
-host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
-target_configargs=${baseargs}
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test -d ${srcdir}/gcc; then
+ if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+ else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+ fi
+ enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+ # First scan to see if an enabled language requires some other language.
+ # We assume that a given config-lang.in will list all the language
+ # front ends it requires, even if some are required indirectly.
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $lang_requires
+ language=
+ lang_requires=
+ . ${lang_frag}
+ for other in ${lang_requires} ; do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
+ ;;
+ esac
+ done
+ ;;
+ esac
+ done
-# Passing a --with-cross-host argument lets the target libraries know
-# whether they are being built with a cross-compiler or being built
-# native. However, it would be better to use other mechanisms to make the
-# sorts of decisions they want to make on this basis. Please consider
-# this option to be deprecated. FIXME.
-if test x${is_cross_compiler} = xyes ; then
- target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
-fi
+ new_enable_languages=c
+ missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=c
-# Default to --enable-multilib.
-if test x${enable_multilib} = x ; then
- target_configargs="--enable-multilib ${target_configargs}"
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, $boot_language, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ boot_language=
+ build_by_default=
+ need_gmp=
+ . ${lang_frag}
+ potential_languages="${potential_languages},${language}"
+ # This is quite sensitive to the ordering of the case statement arms.
+ case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
+ *::*:*)
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ ;;
+ *:ada:no:*)
+ # Ada was requested with no preexisting GNAT. Disable unconditionally.
+ add_this_lang=no
+ ;;
+ *,${language},*:*:*:*)
+ # Language was explicitly selected; include it.
+ add_this_lang=yes
+ ;;
+ *,all,*:*:*:no)
+ # 'all' was selected, but this is not a default language
+ # so do not include it.
+ add_this_lang=no
+ ;;
+ *,all,*:*:*:*)
+ # 'all' was selected and this is a default language; include it.
+ add_this_lang=yes
+ ;;
+ *)
+ add_this_lang=no
+ ;;
+ esac
+
+ # Disable languages that need GMP if it isn't available.
+ case ,${enable_languages},:${have_gmp}:${need_gmp} in
+ *,${language},*:no:yes)
+ # Specifically requested language; tell them.
+ { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
+ ;;
+ *:no:yes)
+ # Silently disable.
+ add_this_lang=no
+ ;;
+ esac
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
+ case $add_this_lang in
+ no)
+ # Remove language-dependent dirs.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
+ *)
+ new_enable_languages="$new_enable_languages,$language"
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ case ${boot_language} in
+ yes)
+ # Add to (comma-separated) list of stage 1 languages.
+ stage1_languages="${stage1_languages},${language}"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+ if test "x$missing_languages" != x; then
+ { echo "configure: error:
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" 1>&2; exit 1; }
+ fi
+
+ if test "x$new_enable_languages" != "x$enable_languages"; then
+ echo The following languages will be built: ${new_enable_languages}
+ fi
+ enable_languages="$new_enable_languages"
+ ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
-# Pass --with-newlib if appropriate. Note that target_configdirs has
-# changed from the earlier setting of with_newlib.
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
- target_configargs="--with-newlib ${target_configargs}"
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=
+ fi
fi
-# Different target subdirs use different values of certain variables
-# (notably CXX). Worse, multilibs use *lots* of different values.
-# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
-# it doesn't automatically accept command-line overrides of them.
-# This means it's not safe for target subdirs to share a cache file,
-# which is disgusting, but there you have it. Hopefully this can be
-# fixed in future. It's still worthwhile to use a cache file for each
-# directory. I think.
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+ j=`echo $i | sed -e s/build-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ build_configdirs="${build_configdirs} $i"
+ fi
+done
-# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
-# provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
- yes)
- { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
-FLAGS_FOR_TARGET=
-case " $target_configdirs " in
- *" newlib "*)
- case " $target_configargs " in
- *" --with-newlib "*)
- case "$target" in
- *-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
- esac
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
- # If we're not building GCC, don't discard standard headers.
- if test -d ${srcdir}/gcc; then
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
- if test "${build}" != "${host}"; then
- # On Canadian crosses, CC_FOR_TARGET will have already been set
- # by `configure', so we won't have an opportunity to add -Bgcc/
- # to it. This is right: we don't want to search that directory
- # for binaries, but we want the header files in there, so add
- # them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
- # Someone might think of using the pre-installed headers on
- # Canadian crosses, in case the installed compiler is not fully
- # compatible with the compiler being built. In this case, it
- # would be better to flag an error than risking having
- # incompatible object files being constructed. We can't
- # guarantee that an error will be flagged, but let's hope the
- # compiler will do it, when presented with incompatible header
- # files.
- fi
+copy_dirs=
+
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
- case "${target}-${is_cross_compiler}" in
- i[3456789]86-*-linux*-no)
- # Here host == target, so we don't need to build gcc,
- # so we don't want to discard standard headers.
- FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
- ;;
- *)
- # If we're building newlib, use its generic headers last, but search
- # for any libc-related directories first (so make it the last -B
- # switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
- ;;
- esac
- ;;
- esac
- ;;
-esac
-# Allow the user to override the flags for
-# our build compiler if desired.
-CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
-# On Canadian crosses, we'll be searching the right directories for
-# the previously-installed cross compiler, so don't bother to add
-# flags for directories within the install tree of the compiler
-# being built; programs in there won't even run.
-if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
- # Search for pre-installed headers if nothing else fits.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+ fi
+fi
+
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+ *-*-netware*)
+ target_makefile_frag="config/mt-netware"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ target_makefile_frag="config/mt-gnu"
+ ;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # commands to handle both 32-bit and 64-bit objects. These flags are
+ # harmless if we're using GNU nm or ar.
+ extra_arflags_for_target=" -X32_64"
+ extra_nmflags_for_target=" -B -X32_64"
+ ;;
+ *-*-darwin*)
+ # ranlib from Darwin requires the -c flag to look at common symbols.
+ extra_ranlibflags_for_target=" -c"
+ ;;
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="config/mt-wince"
+ ;;
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
+ ;;
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ :d30v-*)
+ ospace_frag="config/mt-d30v"
+ ;;
+ :m32r-* | :d10v-* | :fr30-*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ no:* | :*)
+ ;;
+ *)
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+ ;;
+esac
+
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+ case "${target}" in
+ mips*-*-irix[56]*)
+ ;;
+ mips*-*-* | alpha*-*-osf*)
+ with_stabs=yes;
+ extra_host_args="${extra_host_args} --with-stabs"
+ ;;
+ esac
+fi
+
+# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
+# them automatically.
+case "${host}" in
+ hppa*64*-*-hpux11*)
+ extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ ;;
+esac
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='${exec_prefix}'/${target_alias}
+build_tooldir=${tooldir}
+
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2810: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_BISON"; then
+ ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_BISON="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
+if test -n "$CONFIGURED_BISON"; then
+ echo "$ac_t""$CONFIGURED_BISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_BISON" && break
+done
+test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
+
+for ac_prog in 'bison -y' byacc yacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2845: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_YACC"; then
+ ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
+if test -n "$CONFIGURED_YACC"; then
+ echo "$ac_t""$CONFIGURED_YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_YACC" && break
+done
+test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
+
+for ac_prog in gm4 gnum4 m4
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2880: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_M4"; then
+ ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_M4="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
+if test -n "$CONFIGURED_M4"; then
+ echo "$ac_t""$CONFIGURED_M4" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_M4" && break
+done
+test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2915: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_FLEX"; then
+ ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
+if test -n "$CONFIGURED_FLEX"; then
+ echo "$ac_t""$CONFIGURED_FLEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_FLEX" && break
+done
+test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
+
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2950: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_LEX"; then
+ ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
+if test -n "$CONFIGURED_LEX"; then
+ echo "$ac_t""$CONFIGURED_LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_LEX" && break
+done
+test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2985: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CONFIGURED_MAKEINFO"; then
+ ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
+if test -n "$CONFIGURED_MAKEINFO"; then
+ echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_MAKEINFO" && break
+done
+test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
+
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+ ;;
+ esac
+fi
+
+# Make sure that the compiler is able to generate an executable. If it
+# can't, we are probably in trouble. We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created. At this point the main configure script has set CC.
+we_are_ok=no
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
+ fi
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
+rm -f conftest*
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+ sparc-sun-solaris2*)
+ CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
+ if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
+ could_use=
+ test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+ if test -d /opt/cygnus/bin ; then
+ if test "$could_use" = "" ; then
+ could_use="/opt/cygnus/bin"
+ else
+ could_use="$could_use or /opt/cygnus/bin"
+ fi
+ fi
+ if test "$could_use" = "" ; then
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc. You should change your PATH or CC "
+ echo "variable and rerun configure."
+ else
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc, when you should use the C compiler from"
+ echo "$could_use. You should change your"
+ echo "PATH or CC variable and rerun configure."
+ fi
+ fi
+ ;;
+esac
+
+case "${host}" in
+ *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk. Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false. I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
+ *)
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
+ fi
+ ;;
+esac
+
+# Strip out unwanted targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+# Loop over modules. $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses. That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later. In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+ enableval="$enable_bootstrap"
+ :
+else
+ enable_bootstrap=default
+fi
+
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ # This will become 'yes'
+ enable_bootstrap=no ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes | yes:$build:$build:lean)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes | yes:*:*:lean)
+ echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes | no:*:*:lean)
+ { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
+
+ # Fail if wrong command line
+ *)
+ { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; }
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+ yes)
+ bootstrap_lean='#'
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ lean)
+ bootstrap_lean=''
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ no)
+ default_target=all
+ bootstrap_suffix=no-bootstrap ;;
+esac
+
+
+
+for module in ${build_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
+done
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${module}/Makefile; then
+ echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+ rm -f ${module}/Makefile
+ fi
+ extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
+done
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+ extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
+done
+
+extrasub="$extrasub
+/^@if /,/^@endif /d"
+
+# Create the serialization dependencies. This uses a temporary file.
+
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+ enableval="$enable_serial_configure"
+ :
+fi
+
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_build_configure}" = xyes &&
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_host_configure}" = xyes &&
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_target_configure}" = xyes &&
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+
+
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt. These are the ones we might not want to pass
+# down to subconfigures. Also strip program-prefix, program-suffix,
+# and program-transform-name, so that we can pass down a consistent
+# program-transform-name. If autoconf has put single quotes around
+# any of these arguments (because they contain shell metacharacters)
+# then this will fail; in practice this only happens for
+# --program-transform-name, so be sure to override --program-transform-name
+# at the end of the argument list.
+# These will be expanded by make, so quote '$'.
+cat <<\EOF_SED > conftestsed
+s/ --no[^ ]*/ /g
+s/ --c[a-z-]*[= ][^ ]*//g
+s/ --sr[a-z-]*[= ][^ ]*//g
+s/ --ho[a-z-]*[= ][^ ]*//g
+s/ --bu[a-z-]*[= ][^ ]*//g
+s/ --t[a-z-]*[= ][^ ]*//g
+s/ --program-[pst][a-z-]*[= ][^ ]*//g
+s/ -cache-file[= ][^ ]*//g
+s/ -srcdir[= ][^ ]*//g
+s/ -host[= ][^ ]*//g
+s/ -build[= ][^ ]*//g
+s/ -target[= ][^ ]*//g
+s/ -program-prefix[= ][^ ]*//g
+s/ -program-suffix[= ][^ ]*//g
+s/ -program-transform-name[= ][^ ]*//g
+s/ [^' -][^ ]* / /
+s/^ *//;s/ *$//
+s,\$,$$,g
+EOF_SED
+sed -f conftestsed <<EOF_SED > conftestsed.out
+ ${ac_configure_args}
+EOF_SED
+baseargs=`cat conftestsed.out`
+rm -f conftestsed conftestsed.out
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
+
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+
+target_configargs=${baseargs}
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if test x${is_cross_compiler} = xyes ; then
+ target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
+fi
+
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+ target_configargs="--enable-multilib ${target_configargs}"
+fi
+
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+ target_configargs="--with-newlib ${target_configargs}"
+fi
+
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
+
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
+
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+ case " $target_configargs " in
+ *" --with-newlib "*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${srcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ case "${target}-${is_cross_compiler}" in
+ i[3456789]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+# Allow the user to override the flags for
+# our build compiler if desired.
+CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
+fi
+
+# Makefile fragments.
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
+
+
+
+
+
+# Miscellanea: directories, flags, etc.
+
+
+
+
+
+
+
+# Build module lists & subconfigure args.
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3510: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3541: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
+ else
+ AR="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3585: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3616: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
+ else
+ AS="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3660: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3691: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
+ else
+ DLLTOOL="${ncn_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3735: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3766: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
+
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
-if test "x${use_gnu_ld}" = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null ; then
- # Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
+ else
+ LD="${ncn_tool_prefix}$2"
+ fi
fi
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
+ for ncn_progname in nm; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3810: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
+ echo "$ac_t""no" 1>&6
fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
-
-# Makefile fragments.
-host_makefile_frag=${srcdir}/${host_makefile_frag}
-target_makefile_frag=${srcdir}/${target_makefile_frag}
-alphaieee_frag=${srcdir}/${alphaieee_frag}
-ospace_frag=${srcdir}/${ospace_frag}
-
-
-
-
-
-# Miscellanea: directories, flags, etc.
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Build module lists & subconfigure args.
-
-
-
-
-# Host module lists & subconfigure args.
-
-
-
-# Target module lists & subconfigure args.
-
-
-
-# Build tools.
-
-
-
-
-
-
+ if test -z "$ac_cv_prog_NM" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3841: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM" && break
+done
-# Host tools.
-ncn_tool_prefix=
-test -n "$host_alias" && ncn_tool_prefix=$host_alias-
-ncn_target_tool_prefix=
-test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+if test -z "$ac_cv_prog_NM" ; then
+ set dummy nm
+ if test $build = $host ; then
+ NM="$2"
+ else
+ NM="${ncn_tool_prefix}$2"
+ fi
+fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ar; ac_word=$2
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2859: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3885: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR="${ncn_tool_prefix}ar"
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
- echo "$ac_t""$AR" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AR" ; then
- if test $build = $host ; then
- ncn_cv_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2892: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
+echo "configure:3916: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AR"; then
- ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR="ar"
+ ac_cv_prog_RANLIB="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
fi
fi
-ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
-if test -n "$ncn_cv_AR"; then
- echo "$ac_t""$ncn_cv_AR" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR=$ncn_cv_AR
- else
- AR="${ncn_tool_prefix}ar"
fi
-else
- AR="$ac_cv_prog_AR"
+ test -n "$ac_cv_prog_RANLIB" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB" ; then
+ RANLIB=":"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}as; ac_word=$2
+ for ncn_progname in windres; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2931: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:3955: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ncn_tool_prefix}as"
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AS" ; then
- if test $build = $host ; then
- ncn_cv_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2964: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
+echo "configure:3986: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AS"; then
- ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS="as"
+ ac_cv_prog_WINDRES="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
fi
fi
-ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
-if test -n "$ncn_cv_AS"; then
- echo "$ac_t""$ncn_cv_AS" 1>&6
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS=$ncn_cv_AS
+ fi
+ test -n "$ac_cv_prog_WINDRES" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES" ; then
+ set dummy windres
+ if test $build = $host ; then
+ WINDRES="$2"
else
- AS="${ncn_tool_prefix}as"
+ WINDRES="${ncn_tool_prefix}$2"
fi
-else
- AS="$ac_cv_prog_AS"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:4030: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_DLLTOOL" ; then
- if test $build = $host ; then
- ncn_cv_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3036: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
+echo "configure:4061: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_DLLTOOL"; then
- ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
fi
fi
-ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
-if test -n "$ncn_cv_DLLTOOL"; then
- echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL=$ncn_cv_DLLTOOL
+ fi
+ test -n "$ac_cv_prog_OBJCOPY" && break
+done
+
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ set dummy objcopy
+ if test $build = $host ; then
+ OBJCOPY="$2"
else
- DLLTOOL="${ncn_tool_prefix}dlltool"
+ OBJCOPY="${ncn_tool_prefix}$2"
fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ld; ac_word=$2
+ for ncn_progname in objdump; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3075: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+echo "configure:4105: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD="${ncn_tool_prefix}ld"
+ ac_cv_prog_OBJDUMP="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-LD="$ac_cv_prog_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_LD" ; then
- if test $build = $host ; then
- ncn_cv_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3108: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
+echo "configure:4136: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_LD"; then
- ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD="ld"
+ ac_cv_prog_OBJDUMP="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
fi
fi
-ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
-if test -n "$ncn_cv_LD"; then
- echo "$ac_t""$ncn_cv_LD" 1>&6
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD=$ncn_cv_LD
+ fi
+ test -n "$ac_cv_prog_OBJDUMP" && break
+done
+
+if test -z "$ac_cv_prog_OBJDUMP" ; then
+ set dummy objdump
+ if test $build = $host ; then
+ OBJDUMP="$2"
else
- LD="${ncn_tool_prefix}ld"
+ OBJDUMP="${ncn_tool_prefix}$2"
fi
-else
- LD="$ac_cv_prog_LD"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}nm; ac_word=$2
+
+
+
+
+
+
+# Target tools. Do the tests using the names they may have passed in
+# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3147: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+echo "configure:4188: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM="${ncn_tool_prefix}nm"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-NM="$ac_cv_prog_NM"
-if test -n "$NM"; then
- echo "$ac_t""$NM" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_NM" ; then
- if test $build = $host ; then
- ncn_cv_NM=$NM
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3180: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
+echo "configure:4219: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_NM"; then
- ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM="nm"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
fi
fi
-ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
-if test -n "$ncn_cv_NM"; then
- echo "$ac_t""$ncn_cv_NM" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM=$ncn_cv_NM
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
else
- NM="${ncn_tool_prefix}nm"
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- NM="$ac_cv_prog_NM"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3219: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+echo "configure:4263: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_RANLIB" ; then
- if test $build = $host ; then
- ncn_cv_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3252: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
+echo "configure:4294: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_RANLIB"; then
- ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB="ranlib"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
fi
fi
-ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
-if test -n "$ncn_cv_RANLIB"; then
- echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB=$ncn_cv_RANLIB
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
else
- RANLIB=":"
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}windres; ac_word=$2
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3291: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+echo "configure:4338: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$WINDRES"; then
- ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-WINDRES="$ac_cv_prog_WINDRES"
-if test -n "$WINDRES"; then
- echo "$ac_t""$WINDRES" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_WINDRES" ; then
- if test $build = $host ; then
- ncn_cv_WINDRES=$WINDRES
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3324: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
+echo "configure:4369: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_WINDRES"; then
- ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES="windres"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
fi
fi
-ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
-if test -n "$ncn_cv_WINDRES"; then
- echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES=$ncn_cv_WINDRES
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
+ if test $build = $target ; then
+ CC_FOR_TARGET="$2"
else
- WINDRES="${ncn_tool_prefix}windres"
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- WINDRES="$ac_cv_prog_WINDRES"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3363: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+echo "configure:4413: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-OBJCOPY="$ac_cv_prog_OBJCOPY"
-if test -n "$OBJCOPY"; then
- echo "$ac_t""$OBJCOPY" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJCOPY" ; then
- if test $build = $host ; then
- ncn_cv_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3396: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
+echo "configure:4444: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJCOPY"; then
- ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
fi
fi
-ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
-if test -n "$ncn_cv_OBJCOPY"; then
- echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJCOPY=$ncn_cv_OBJCOPY
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
+ if test $build = $target ; then
+ CXX_FOR_TARGET="$2"
else
- OBJCOPY="${ncn_tool_prefix}objcopy"
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objdump; ac_word=$2
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3435: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+echo "configure:4488: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
- echo "$ac_t""$OBJDUMP" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJDUMP" ; then
- if test $build = $host ; then
- ncn_cv_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3468: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
+echo "configure:4519: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJDUMP"; then
- ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
fi
fi
-ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
-if test -n "$ncn_cv_OBJDUMP"; then
- echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJDUMP=$ncn_cv_OBJDUMP
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
+ if test $build = $target ; then
+ DLLTOOL_FOR_TARGET="$2"
else
- OBJDUMP="${ncn_tool_prefix}objdump"
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
-
-
-
-
-
-
-
-
-
-# Target tools.
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3517: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4563: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3550: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4594: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
fi
fi
-ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
-if test -n "$ncn_cv_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
- else
- AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
fi
-else
- AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}as; ac_word=$2
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3589: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4633: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3622: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4664: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
fi
fi
-ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
-if test -n "$ncn_cv_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
+ if test $build = $target ; then
+ GCJ_FOR_TARGET="$2"
else
- AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3661: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4708: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4739: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
else
- DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3733: checking for $ac_word" >&5
+echo "configure:4783: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3766: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4814: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
fi
fi
-ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
-if test -n "$ncn_cv_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ set dummy ld
+ if test $build = $target ; then
+ LD_FOR_TARGET="$2"
else
- LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3805: checking for $ac_word" >&5
+echo "configure:4858: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3838: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4889: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
fi
fi
-ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
-if test -n "$ncn_cv_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
else
- NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3877: checking for $ac_word" >&5
+echo "configure:4933: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3910: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4964: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
- else
- RANLIB_FOR_TARGET=":"
fi
-else
- RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ RANLIB_FOR_TARGET=":"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3949: checking for $ac_word" >&5
+echo "configure:5003: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3982: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5034: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ set dummy windres
+ if test $build = $target ; then
+ WINDRES_FOR_TARGET="$2"
else
- WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
fi
-
-
-
-
-
-
+CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
+CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
+CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
+CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
+CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
+CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
+CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
+CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
+CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
+CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
+CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
# should also eliminate all of this cleanly.
AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+else
+ # Just use the ones we found.
+ AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
+ AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
+ DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
+ LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+ NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
+ RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
+
+
+
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4049: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5135: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
MAINT=$MAINTAINER_MODE_TRUE
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+ vax-*-*)
+ case ${GCC} in
+ yes) stage1_cflags="-g -Wa,-J" ;;
+ *) stage1_cflags="-g -J" ;;
+ esac ;;
+ powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+
+
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
+# possible, however, we can resort to mv.
+echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
+echo "configure:5182: checking if symbolic links between directories work" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "${LN_S}" = "ln -s" \
+ && mkdir confdir.s1 \
+ && ln -s confdir.s1 confdir.s2 \
+ && echo timestamp1 > confdir.s1/conftest.1 \
+ && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+ && echo timestamp2 > confdir.s2/conftest.2 \
+ && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+ && rm -f confdir.s2; then
+ gcc_cv_prog_ln_s_dir=yes
+else
+ gcc_cv_prog_ln_s_dir=no
+fi
+rm -rf confdir.s1 confdir.s2
+fi
+
+echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
+
+case ${gcc_cv_prog_ln_s_dir} in
+ yes)
+ CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+ UNDO_LINK_TO_DIR='rm -f $$1' ;;
+ *)
+ CREATE_LINK_TO_DIR='mv $$1 $$2'
+ UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+
+
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+# Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ :
+else
+ enable_werror=yes
+fi
+
+case ${enable_werror} in
+ yes) stage2_werror_flag="--enable-werror-always" ;;
+ *) stage2_werror_flag="" ;;
+esac
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@LN@%$LN%g
+s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@target_subdir@%$target_subdir%g
-/@maybe_dependencies@/r $maybe_dependencies
-s%@maybe_dependencies@%%g
+s%@CC@%$CC%g
+s%@GNATBIND@%$GNATBIND%g
+s%@do_compare@%$do_compare%g
+s%@gmplibs@%$gmplibs%g
+s%@gmpinc@%$gmpinc%g
+s%@stage1_languages@%$stage1_languages%g
+s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
+s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
+s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
+s%@CONFIGURED_M4@%$CONFIGURED_M4%g
+s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
+s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
+s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
+s%@bootstrap_lean@%$bootstrap_lean%g
+s%@default_target@%$default_target%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
/@host_makefile_frag@/r $host_makefile_frag
s%@alphaieee_frag@%%g
/@ospace_frag@/r $ospace_frag
s%@ospace_frag@%%g
-s%@SET_LIB_PATH@%$SET_LIB_PATH%g
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
-s%@configlinks@%$configlinks%g
-s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g
s%@build_tooldir@%$build_tooldir%g
s%@GDB_TK@%$GDB_TK%g
-s%@gxx_include_dir@%$gxx_include_dir%g
-s%@libstdcxx_incdir@%$libstdcxx_incdir%g
s%@build_configargs@%$build_configargs%g
-s%@configure_build_modules@%$configure_build_modules%g
-s%@all_build_modules@%$all_build_modules%g
+s%@build_configdirs@%$build_configdirs%g
s%@host_configargs@%$host_configargs%g
s%@configdirs@%$configdirs%g
s%@target_configargs@%$target_configargs%g
s%@target_configdirs@%$target_configdirs%g
-s%@BISON@%$BISON%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@LEX@%$LEX%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@YACC@%$YACC%g
s%@config_shell@%$config_shell%g
s%@AR@%$AR%g
-s%@ncn_cv_AR@%$ncn_cv_AR%g
s%@AS@%$AS%g
-s%@ncn_cv_AS@%$ncn_cv_AS%g
s%@DLLTOOL@%$DLLTOOL%g
-s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
s%@LD@%$LD%g
-s%@ncn_cv_LD@%$ncn_cv_LD%g
s%@NM@%$NM%g
-s%@ncn_cv_NM@%$ncn_cv_NM%g
s%@RANLIB@%$RANLIB%g
-s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
s%@WINDRES@%$WINDRES%g
-s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
s%@OBJCOPY@%$OBJCOPY%g
-s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
s%@OBJDUMP@%$OBJDUMP%g
-s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
-s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@DEFAULT_YACC@%$DEFAULT_YACC%g
-s%@DEFAULT_LEX@%$DEFAULT_LEX%g
-s%@DEFAULT_M4@%$DEFAULT_M4%g
s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g
s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g
+s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
+s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g
+s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
+s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g
s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g
s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g
-s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
+s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
+s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
+s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
+s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
+s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
+s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
+s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
+s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
+s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
+s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
+s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
-s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
-s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
-s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
-s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
+s%@stage1_cflags@%$stage1_cflags%g
+s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
+s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
+s%@stage2_werror_flag@%$stage2_werror_flag%g
CEOF
EOF
OSDN Git Service
