M4
BISON
YACC
-config_shell
WINDRES_FOR_BUILD
WINDMC_FOR_BUILD
RANLIB_FOR_BUILD
done
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell. This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL. This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
- if test x${CONFIG_SHELL} = x ; then
- if test ! -f /bin/sh ; then
- if test x${SHELL} != x && test -f ${SHELL} ; then
- CONFIG_SHELL=${SHELL}
- export CONFIG_SHELL
- else
- for prog in sh sh.exe bash bash.exe; do
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$prog; then
- CONFIG_SHELL=$dir/$prog
- export CONFIG_SHELL
- break
- fi
- done
- IFS="$save_ifs"
- test -n "${CONFIG_SHELL}" && break
- done
- fi
- fi
- fi
- ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-zlib \
- target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# run only in the target environment
#
# note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list. those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
#
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-rda"
################################################################################
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
- yes) skipdirs="${skipdirs} ${native_only}" ;;
esac
# If both --with-headers and --with-libs are specified, default to
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+ | *-*-solaris2* | *-*-nto*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
# exist yet.
case "${host}" in
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs byacc"
- ;;
i[3456789]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[3456789]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- *-*-cygwin*)
- noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
- ;;
- *-*-netbsd*)
- noconfigdirs="$noconfigdirs rcs"
+ noconfigdirs="$noconfigdirs tcl tk itcl"
;;
esac
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
- *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
esac
fi
+# Disable libssp for some systems.
+case "${target}" in
+ avr-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+esac
+
+# Disable target libiberty for some systems.
+case "${target}" in
+ *-*-kaos*)
+ # Remove unsupported stuff on all kaOS configurations.
+ skipdirs="target-libiberty"
+ ;;
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-rtems*)
+ skipdirs="${skipdirs} target-libiberty"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ mips*-sde-elf*)
+ skipdirs="$skipdirs target-libiberty"
+ ;;
+ ip2k-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+ mmix-*-*)
+ # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+ unsupported_languages="$unsupported_languages fortran"
+ ;;
+esac
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
case "${target}" in
*-*-chorusos)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ *-*-dragonfly*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
- skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
- skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
# Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-rtems*)
- skipdirs="${skipdirs} target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
- # newlib is not 64 bit ready. I'm not sure about fileutils.
+ # newlib is not 64 bit ready.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- noconfigdirs="$noconfigdirs expect dejagnu"
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
noconfigdirs="$noconfigdirs target-newlib"
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb and readline
- *) noconfigdirs="$noconfigdirs gdb readline"
- ;;
- esac
libgloss_dir=wince
;;
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-coff)
- noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
arm-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ noconfigdirs="$noconfigdirs target-libffi"
libgloss_dir=arm
;;
arm*-*-linux-gnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
case ${with_newlib} in
no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
libgloss_dir=arm
;;
arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+ noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
noconfigdirs="$noconfigdirs target-boehm-gc"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
c4x-*-* | tic4x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+ tic54x-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
cr16-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
cris-*-* | crisv32-*-*)
unsupported_languages="$unsupported_languages java"
case "${target}" in
- *-*-aout)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf) # See PR46792 regarding target-libffi.
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
- *)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ *) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
esac
libgloss_dir=cris
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
d30v-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ noconfigdirs="$noconfigdirs gdb"
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
noconfigdirs="$noconfigdirs ${libgcj}"
;;
hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld shellutils"
+ noconfigdirs="$noconfigdirs ld"
;;
hppa*-*-pro*)
libgloss_dir=pa
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ noconfigdirs="$noconfigdirs ld ${libgcj}"
;;
i960-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ noconfigdirs="$noconfigdirs gdb"
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb"
;;
ia64*-**-hpux*)
# No ld support yet.
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ noconfigdirs="$noconfigdirs ${libgcj} readline libgui itcl gdb ld"
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=i386
;;
i[3456789]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
- case "${target}" in
- *-*-*libc1*)
- noconfigdirs="$noconfigdirs ${libgcj}";;
- esac
-
# This section makes it possible to build newlib natively on linux.
# If we are using a cross compiler then don't configure newlib.
if test x${is_cross_compiler} != xno ; then
# 'target-newlib' will appear in skipdirs.
;;
i[3456789]86-w64-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
i[3456789]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
i[3456789]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
i[3456789]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-sysv4*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
i[3456789]86-*-rdos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- m68k-*-coff*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
- unsupported_languages="$unsupported_languages fortran java"
- ;;
- mn10200-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- mn10300-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb"
+ unsupported_languages="$unsupported_languages java"
;;
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- picochip-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
libgloss_dir=rs6000
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
mips*-sde-elf*)
- skipdirs="$skipdirs target-libiberty"
noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
libgloss_dir=mips
;;
mips*-*-irix5*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-irix6*)
# Linking libjava exceeds command-line length limits on at least
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
noconfigdirs="$noconfigdirs gprof ${libgcj}"
libgloss_dir=mips
;;
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
- ;;
sh-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
- *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
- esac
case "${target}" in
sh*-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}" ;;
libgloss_dir=sparc
;;
sparclite-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=sparc
;;
sparc-*-sunos4*)
- noconfigdirs="$noconfigdirs ${libgcj}"
if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
else
use_gnu_ld=no
fi
;;
- sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
tic6x-*-*)
noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
- ;;
- v850*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
;;
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- xtensa*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- ip2k-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- i[3456789]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[3456789]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux*)
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[3456789]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
else
if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
# the *-*-osname triplets last.
md_exec_prefix=
case "${target}" in
- alpha*-*-*vms*)
- md_exec_prefix=/gnu/lib/gcc-lib
- ;;
i[34567]86-pc-msdosdjgpp*)
md_exec_prefix=/dev/env/DJDIR/bin
;;
- i[34567]86-*-sco3.2v5*)
- if test $with_gnu_as = yes; then
- md_exec_prefix=/usr/gnu/bin
- else
- md_exec_prefix=/usr/ccs/bin/elf
- fi
- ;;
-
- mn10300-*-* | \
- powerpc-*-chorusos* | \
- powerpc*-*-eabi* | \
- powerpc*-*-sysv* | \
- powerpc*-*-kaos* | \
- s390x-ibm-tpf*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- sparc64-*-elf*)
- ;;
- v850*-*-*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- xtensa*-*-elf*)
- ;;
-
- *-*-beos* | \
- *-*-elf* | \
*-*-hpux* | \
- *-*-netware* | \
*-*-nto-qnx* | \
- *-*-rtems* | \
- *-*-solaris2* | \
- *-*-sysv[45]* | \
- *-*-vxworks* | \
- *-wrs-windiss)
+ *-*-solaris2*)
md_exec_prefix=/usr/ccs/bin
;;
esac
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
# ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
-
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
esac
for ac_prog in bison
OSDN Git Service
