Commit chnages missed in the previous commit.

[pf3gnuchains/gcc-fork.git] / configure

diff --git a/configure b/configure
index 421fe93..36927a3 100755 (executable)
--- a/configure
+++ b/configure
@@ -1098,7 +1098,6 @@ else
 fi
 
 if test "${ENABLE_LIBADA}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libada"
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
@@ -1110,9 +1109,6 @@ else
   ENABLE_LIBSSP=yes
 fi
 
-if test "${ENABLE_LIBSSP}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libssp"
-fi
 
 # Set the default so we build libgcc-math for ix86 and x86_64
 # Check whether --enable-libgcc-math or --disable-libgcc-math was given.
@@ -1130,9 +1126,6 @@ esac
 
 fi
 
-if test "${enable_libgcc_math}" != "yes"; then
-  noconfigdirs="$noconfigdirs target-libgcc-math"
-fi
 
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
@@ -1151,14 +1144,8 @@ no)
 esac
 
 
-# Allow --disable-libmudflap to exclude target-libmudflap
-case $enable_libmudflap in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libmudflap"
-    ;;
-"")
+# Disable libmudflap on some systems.
+if test x$enable_libmudflap = x ; then
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
         # Enable libmudflap by default in GNU and friends.
@@ -1171,16 +1158,10 @@ no)
        noconfigdirs="$noconfigdirs target-libmudflap"
        ;;
     esac
-esac
+fi
 
-# Allow --disable-libgomp to exclude target-libgomp
-case $enable_libgomp in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libgomp"
-    ;;
-"")
+# Disable libgomp on non POSIX hosted systems.
+if test x$enable_libgomp = x ; then
     # Enable libgomp by default on hosted POSIX systems.
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
@@ -1189,13 +1170,13 @@ no)
        ;;
     *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
        ;;
-    *-*-darwin*)
+    *-*-darwin* | *-*-aix*)
        ;;
     *)
        noconfigdirs="$noconfigdirs target-libgomp"
        ;;
     esac
-esac
+fi
 
 
 case "${target}" in
@@ -1266,9 +1247,6 @@ case "${target}" in
   *-*-vxworks*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
-  m32c-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
     # newlib is not 64 bit ready.  I'm not sure about fileutils.
@@ -1499,6 +1477,9 @@ case "${target}" in
   i[3456789]86-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
+  i[3456789]86-*-rdos*)
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+    ;;
   m32r-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -1859,8 +1840,6 @@ if test "${build}" != "${host}" ; then
   CXX=${CXX-${host_alias}-c++}
   CXXFLAGS=${CXXFLAGS-"-g -O2"}
   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
-  BUILD_PREFIX=${build_alias}-
-  BUILD_PREFIX_1=${build_alias}-
 
 else
   # Set reasonable default values for some tools even if not Canadian.
@@ -1872,13 +1851,10 @@ else
   # This is all going to change when we autoconfiscate...
 
   CC_FOR_BUILD="\$(CC)"
-  BUILD_PREFIX=
-  BUILD_PREFIX_1=loser-
-
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1882: checking for $ac_word" >&5
+echo "configure:1858: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1908,7 +1884,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1912: checking for $ac_word" >&5
+echo "configure:1888: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1959,7 +1935,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1963: checking for $ac_word" >&5
+echo "configure:1939: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1991,7 +1967,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1995: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2002,12 +1978,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2006 "configure"
+#line 1982 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2033,12 +2009,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2037: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2042: checking whether we are using GNU C" >&5
+echo "configure:2018: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2047,7 +2023,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2066,7 +2042,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2070: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2133,7 +2109,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2137: checking for $ac_word" >&5
+echo "configure:2113: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2165,7 +2141,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2169: checking for $ac_word" >&5
+echo "configure:2145: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2198,7 +2174,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2202: checking whether compiler driver understands Ada" >&5
+echo "configure:2178: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2230,7 +2206,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2234: checking how to compare bootstrapped objects" >&5
+echo "configure:2210: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2328,9 +2304,9 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2332: checking for correct version of gmp.h" >&5
+echo "configure:2308: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2334 "configure"
+#line 2310 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2341,7 +2317,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2345: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2354,12 +2330,12 @@ rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
   echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2358: checking for MPFR" >&5
+echo "configure:2334: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2363 "configure"
+#line 2339 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
@@ -2367,7 +2343,7 @@ int main() {
 mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2378,8 +2354,8 @@ else
 fi
 rm -f conftest*
   LIBS="$saved_LIBS"
-  CFLAGS="$saved_CFLAGS"
 fi
+CFLAGS="$saved_CFLAGS"
 
 # Flags needed for both GMP and/or MPFR
 
@@ -2551,6 +2527,14 @@ Recognised languages are: ${potential_languages}" 1>&2; exit 1; }
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+  if eval test x\${enable_${dirname}} "=" xno ; then
+    noconfigdirs="$noconfigdirs $dir"
+  fi
+done
+
 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
 # $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
@@ -3363,6 +3347,20 @@ if test "x${use_gnu_ld}" = x &&
   FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
 fi
 
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+  m32c-*-* )
+    if test -d ${srcdir}/libgloss/m32c; then
+      # This is for crt0.o
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+      # This is for r8c.ld
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+      # This is for libnosys.a
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+    fi
+    ;;
+esac
+
 # Makefile fragments.
 for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
 do
@@ -3384,8 +3382,6 @@ done
 
 
 
-
-
 # Build module lists & subconfigure args.
 
 
@@ -3412,7 +3408,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3416: checking for $ac_word" >&5
+echo "configure:3412: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3452,7 +3448,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3456: checking for $ac_word" >&5
+echo "configure:3452: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3491,7 +3487,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3495: checking for $ac_word" >&5
+echo "configure:3491: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3530,7 +3526,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3534: checking for $ac_word" >&5
+echo "configure:3530: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3570,7 +3566,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3574: checking for $ac_word" >&5
+echo "configure:3570: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3609,7 +3605,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3613: checking for $ac_word" >&5
+echo "configure:3609: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3643,10 +3639,10 @@ case " $build_configdirs " in
   *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
   *)
 
-    # For an installed makeinfo, we require it to be from texinfo 4.2 or
+    # For an installed makeinfo, we require it to be from texinfo 4.4 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"
@@ -3662,7 +3658,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3666: checking for $ac_word" >&5
+echo "configure:3662: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3703,7 +3699,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3707: checking for $ac_word" >&5
+echo "configure:3703: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3751,7 +3747,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3755: checking for $ac_word" >&5
+echo "configure:3751: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3782,7 +3778,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3786: checking for $ac_word" >&5
+echo "configure:3782: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3826,7 +3822,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3830: checking for $ac_word" >&5
+echo "configure:3826: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3857,7 +3853,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3861: checking for $ac_word" >&5
+echo "configure:3857: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3901,7 +3897,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3905: checking for $ac_word" >&5
+echo "configure:3901: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3932,7 +3928,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3936: checking for $ac_word" >&5
+echo "configure:3932: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3976,7 +3972,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3980: checking for $ac_word" >&5
+echo "configure:3976: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4007,7 +4003,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4011: checking for $ac_word" >&5
+echo "configure:4007: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4051,7 +4047,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4055: checking for $ac_word" >&5
+echo "configure:4051: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4082,7 +4078,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4086: checking for $ac_word" >&5
+echo "configure:4082: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4126,7 +4122,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4130: checking for $ac_word" >&5
+echo "configure:4126: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4157,7 +4153,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4161: checking for $ac_word" >&5
+echo "configure:4157: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4201,7 +4197,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4205: checking for $ac_word" >&5
+echo "configure:4201: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4232,7 +4228,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4236: checking for $ac_word" >&5
+echo "configure:4232: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4271,7 +4267,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4275: checking for $ac_word" >&5
+echo "configure:4271: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4302,7 +4298,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4306: checking for $ac_word" >&5
+echo "configure:4302: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4341,7 +4337,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4345: checking for $ac_word" >&5
+echo "configure:4341: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4372,7 +4368,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4376: checking for $ac_word" >&5
+echo "configure:4372: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4416,7 +4412,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4420: checking for $ac_word" >&5
+echo "configure:4416: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4447,7 +4443,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4451: checking for $ac_word" >&5
+echo "configure:4447: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4491,7 +4487,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4495: checking for $ac_word" >&5
+echo "configure:4491: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4522,7 +4518,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4526: checking for $ac_word" >&5
+echo "configure:4522: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4586,9 +4582,9 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in cc gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4590: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/CC_FOR_TARGET; then
-      ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/CC_FOR_TARGET
+echo "configure:4586: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -4603,7 +4599,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4607: checking for $ac_word" >&5
+echo "configure:4603: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4634,7 +4630,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4638: checking for $ac_word" >&5
+echo "configure:4634: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4677,9 +4673,9 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in c++ g++ cxx gxx; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4681: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/CXX_FOR_TARGET; then
-      ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/CXX_FOR_TARGET
+echo "configure:4677: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -4694,7 +4690,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4698: checking for $ac_word" >&5
+echo "configure:4694: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4725,7 +4721,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4729: checking for $ac_word" >&5
+echo "configure:4725: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4768,9 +4764,9 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4772: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/GCC_FOR_TARGET; then
-      ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/GCC_FOR_TARGET
+echo "configure:4768: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -4785,7 +4781,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4789: checking for $ac_word" >&5
+echo "configure:4785: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4816,7 +4812,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4820: checking for $ac_word" >&5
+echo "configure:4816: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4854,9 +4850,9 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcj; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4858: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/GCJ_FOR_TARGET; then
-      ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/GCJ_FOR_TARGET
+echo "configure:4854: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -4871,7 +4867,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4875: checking for $ac_word" >&5
+echo "configure:4871: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4902,7 +4898,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4906: checking for $ac_word" >&5
+echo "configure:4902: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4945,9 +4941,9 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gfortran; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4949: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/GFORTRAN_FOR_TARGET; then
-      ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/GFORTRAN_FOR_TARGET
+echo "configure:4945: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -4962,7 +4958,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4966: checking for $ac_word" >&5
+echo "configure:4962: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4993,7 +4989,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4997: checking for $ac_word" >&5
+echo "configure:4993: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5099,11 +5095,15 @@ rm conftest.c
 
 if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5104: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/AR_FOR_TARGET
-    ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
+    echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5100: checking for ar in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/ar; then
+      AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
+      ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     AR_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ar`
     test $AR_FOR_TARGET=ar && AR_FOR_TARGET=
@@ -5152,8 +5152,8 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   for ncn_progname in ar; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
 echo "configure:5155: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/AR_FOR_TARGET; then
-      ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/AR_FOR_TARGET
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5239,6 +5239,8 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
   fi
 fi
 
+else
+  AR_FOR_TARGET=$ac_cv_path_AR_FOR_TARGET
 fi
 
 
@@ -5246,11 +5248,15 @@ fi
 
 if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5251: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/AS_FOR_TARGET
-    ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
+    echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5253: checking for as in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/as; then
+      AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
+      ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     AS_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=as`
     test $AS_FOR_TARGET=as && AS_FOR_TARGET=
@@ -5261,7 +5267,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5265: checking for $ac_word" >&5
+echo "configure:5271: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5298,9 +5304,9 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in as; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5302: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/AS_FOR_TARGET; then
-      ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/AS_FOR_TARGET
+echo "configure:5308: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5315,7 +5321,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5319: checking for $ac_word" >&5
+echo "configure:5325: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5346,7 +5352,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5350: checking for $ac_word" >&5
+echo "configure:5356: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5386,6 +5392,8 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
   fi
 fi
 
+else
+  AS_FOR_TARGET=$ac_cv_path_AS_FOR_TARGET
 fi
 
 
@@ -5393,11 +5401,15 @@ fi
 
 if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5398: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/DLLTOOL_FOR_TARGET
-    ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
+    echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5406: checking for dlltool in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/dlltool; then
+      DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
+      ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     DLLTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=dlltool`
     test $DLLTOOL_FOR_TARGET=dlltool && DLLTOOL_FOR_TARGET=
@@ -5408,7 +5420,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5412: checking for $ac_word" >&5
+echo "configure:5424: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5445,9 +5457,9 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in dlltool; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5449: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/DLLTOOL_FOR_TARGET; then
-      ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/DLLTOOL_FOR_TARGET
+echo "configure:5461: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5462,7 +5474,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5466: checking for $ac_word" >&5
+echo "configure:5478: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5493,7 +5505,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5497: checking for $ac_word" >&5
+echo "configure:5509: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5533,6 +5545,8 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
   fi
 fi
 
+else
+  DLLTOOL_FOR_TARGET=$ac_cv_path_DLLTOOL_FOR_TARGET
 fi
 
 
@@ -5540,11 +5554,15 @@ fi
 
 if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5545: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/LD_FOR_TARGET
-    ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
+    echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5559: checking for ld in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/ld; then
+      LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
+      ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     LD_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ld`
     test $LD_FOR_TARGET=ld && LD_FOR_TARGET=
@@ -5555,7 +5573,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5559: checking for $ac_word" >&5
+echo "configure:5577: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5592,9 +5610,9 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ld; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5596: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/LD_FOR_TARGET; then
-      ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/LD_FOR_TARGET
+echo "configure:5614: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5609,7 +5627,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5613: checking for $ac_word" >&5
+echo "configure:5631: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5640,7 +5658,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5644: checking for $ac_word" >&5
+echo "configure:5662: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5680,6 +5698,8 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
   fi
 fi
 
+else
+  LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET
 fi
 
 
@@ -5687,11 +5707,15 @@ fi
 
 if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5692: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/LIPO_FOR_TARGET
-    ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
+    echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5712: checking for lipo in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/lipo; then
+      LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
+      ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
     test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
@@ -5702,7 +5726,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5706: checking for $ac_word" >&5
+echo "configure:5730: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5739,9 +5763,9 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in lipo; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5743: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/LIPO_FOR_TARGET; then
-      ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/LIPO_FOR_TARGET
+echo "configure:5767: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5756,7 +5780,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5760: checking for $ac_word" >&5
+echo "configure:5784: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5787,7 +5811,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5791: checking for $ac_word" >&5
+echo "configure:5815: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5827,6 +5851,8 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
   fi
 fi
 
+else
+  LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
 fi
 
 
@@ -5834,11 +5860,15 @@ fi
 
 if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5839: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/NM_FOR_TARGET
-    ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
+    echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5865: checking for nm in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/nm; then
+      NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
+      ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
     test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
@@ -5849,7 +5879,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5853: checking for $ac_word" >&5
+echo "configure:5883: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5886,9 +5916,9 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in nm; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5890: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/NM_FOR_TARGET; then
-      ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/NM_FOR_TARGET
+echo "configure:5920: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -5903,7 +5933,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5907: checking for $ac_word" >&5
+echo "configure:5937: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5934,7 +5964,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5938: checking for $ac_word" >&5
+echo "configure:5968: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5974,6 +6004,8 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
   fi
 fi
 
+else
+  NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
 fi
 
 
@@ -5981,11 +6013,15 @@ fi
 
 if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5986: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/OBJDUMP_FOR_TARGET
-    ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
+    echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6018: checking for objdump in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/objdump; then
+      OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
+      ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
     test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
@@ -5996,7 +6032,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6000: checking for $ac_word" >&5
+echo "configure:6036: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6033,9 +6069,9 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in objdump; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6037: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/OBJDUMP_FOR_TARGET; then
-      ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/OBJDUMP_FOR_TARGET
+echo "configure:6073: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -6050,7 +6086,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6054: checking for $ac_word" >&5
+echo "configure:6090: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6081,7 +6117,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6085: checking for $ac_word" >&5
+echo "configure:6121: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6121,6 +6157,8 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
   fi
 fi
 
+else
+  OBJDUMP_FOR_TARGET=$ac_cv_path_OBJDUMP_FOR_TARGET
 fi
 
 
@@ -6128,11 +6166,15 @@ fi
 
 if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6133: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/RANLIB_FOR_TARGET
-    ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
+    echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6171: checking for ranlib in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/ranlib; then
+      RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
+      ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
     test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
@@ -6143,7 +6185,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6147: checking for $ac_word" >&5
+echo "configure:6189: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6180,9 +6222,9 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ranlib; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6184: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/RANLIB_FOR_TARGET; then
-      ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/RANLIB_FOR_TARGET
+echo "configure:6226: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -6197,7 +6239,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6201: checking for $ac_word" >&5
+echo "configure:6243: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6228,7 +6270,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6232: checking for $ac_word" >&5
+echo "configure:6274: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6268,6 +6310,8 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
   fi
 fi
 
+else
+  RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET
 fi
 
 
@@ -6275,11 +6319,15 @@ fi
 
 if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6280: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/STRIP_FOR_TARGET
-    ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
+    echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6324: checking for strip in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/strip; then
+      STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
+      ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
     test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
@@ -6290,7 +6338,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6294: checking for $ac_word" >&5
+echo "configure:6342: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6327,9 +6375,9 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in strip; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6331: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/STRIP_FOR_TARGET; then
-      ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/STRIP_FOR_TARGET
+echo "configure:6379: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -6344,7 +6392,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6348: checking for $ac_word" >&5
+echo "configure:6396: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6375,7 +6423,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6379: checking for $ac_word" >&5
+echo "configure:6427: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6415,6 +6463,8 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
   fi
 fi
 
+else
+  STRIP_FOR_TARGET=$ac_cv_path_STRIP_FOR_TARGET
 fi
 
 
@@ -6422,11 +6472,15 @@ fi
 
 if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
-    echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6427: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
-    WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/WINDRES_FOR_TARGET
-    ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
-    echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
+    echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6477: checking for windres in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/windres; then
+      WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
+      ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+      echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
+    else
+      echo "$ac_t""no" 1>&6
+    fi
   elif test $build != $host && test $have_gcc_for_target = yes; then
     WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
     test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
@@ -6437,7 +6491,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6441: checking for $ac_word" >&5
+echo "configure:6495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6474,9 +6528,9 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in windres; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6478: checking for ${ncn_progname} in $with_build_time_tools" >&5
-    if test -x $with_build_time_tools/WINDRES_FOR_TARGET; then
-      ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/WINDRES_FOR_TARGET
+echo "configure:6532: checking for ${ncn_progname} in $with_build_time_tools" >&5
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
       break
     else
@@ -6491,7 +6545,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6495: checking for $ac_word" >&5
+echo "configure:6549: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6522,7 +6576,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6526: checking for $ac_word" >&5
+echo "configure:6580: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6562,13 +6616,15 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
   fi
 fi
 
+else
+  WINDRES_FOR_TARGET=$ac_cv_path_WINDRES_FOR_TARGET
 fi
 
 
 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 
 echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6572: checking where to find the target ar" >&5
+echo "configure:6628: checking where to find the target ar" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6601,7 +6657,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6605: checking where to find the target as" >&5
+echo "configure:6661: checking where to find the target as" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6634,7 +6690,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6638: checking where to find the target cc" >&5
+echo "configure:6694: checking where to find the target cc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6667,7 +6723,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6671: checking where to find the target c++" >&5
+echo "configure:6727: checking where to find the target c++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6703,7 +6759,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6707: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6763: checking where to find the target c++ for libstdc++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6739,7 +6795,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6743: checking where to find the target dlltool" >&5
+echo "configure:6799: checking where to find the target dlltool" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6772,7 +6828,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6776: checking where to find the target gcc" >&5
+echo "configure:6832: checking where to find the target gcc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6805,7 +6861,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6809: checking where to find the target gcj" >&5
+echo "configure:6865: checking where to find the target gcj" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6841,7 +6897,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6845: checking where to find the target gfortran" >&5
+echo "configure:6901: checking where to find the target gfortran" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6877,7 +6933,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6881: checking where to find the target ld" >&5
+echo "configure:6937: checking where to find the target ld" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6910,7 +6966,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6914: checking where to find the target lipo" >&5
+echo "configure:6970: checking where to find the target lipo" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6933,7 +6989,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:6937: checking where to find the target nm" >&5
+echo "configure:6993: checking where to find the target nm" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6966,7 +7022,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:6970: checking where to find the target objdump" >&5
+echo "configure:7026: checking where to find the target objdump" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6999,7 +7055,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7003: checking where to find the target ranlib" >&5
+echo "configure:7059: checking where to find the target ranlib" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7032,7 +7088,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7036: checking where to find the target strip" >&5
+echo "configure:7092: checking where to find the target strip" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7065,7 +7121,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7069: checking where to find the target windres" >&5
+echo "configure:7125: checking where to find the target windres" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7126,7 +7182,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7130: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7186: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -7251,15 +7307,34 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[   ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\),-D\1=\2,g
+t quote
+s,^[   ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[    `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -7372,8 +7447,6 @@ s%@alphaieee_frag@%%g
 /@ospace_frag@/r $ospace_frag
 s%@ospace_frag@%%g
 s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
-s%@BUILD_PREFIX@%$BUILD_PREFIX%g
-s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
 s%@tooldir@%$tooldir%g
 s%@build_tooldir@%$build_tooldir%g
 s%@CONFIGURE_GDB_TK@%$CONFIGURE_GDB_TK%g
@@ -7384,7 +7457,6 @@ s%@build_configdirs@%$build_configdirs%g
 s%@host_configargs@%$host_configargs%g
 s%@configdirs@%$configdirs%g
 s%@target_configargs@%$target_configargs%g
-s%@target_configdirs@%$target_configdirs%g
 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
 s%@config_shell@%$config_shell%g
 s%@YACC@%$YACC%g