*) target_noncanonical=${target_alias} ;;
esac
- # Prefix 'build-' so this never conflicts with target_subdir.
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
# Check whether --with-build-libsubdir or --without-build-libsubdir was given.
if test "${with_build_libsubdir+set}" = set; then
i[3456789]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-
- # Can't build gdb for mingw32 if not native.
- case "${host}" in
- i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
- ;;
- esac
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
elif test -d "$srcdir/newlib"; then
echo "Warning: winsup is missing so newlib can't be built."
fi
-
- # Can't build gdb for Cygwin if not native.
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
- ;;
- esac
;;
i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1860: checking for $ac_word" >&5
+echo "configure:1856: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1890: checking for $ac_word" >&5
+echo "configure:1886: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1941: checking for $ac_word" >&5
+echo "configure:1937: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1973: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1984 "configure"
+#line 1980 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1989: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2015: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2020: checking whether we are using GNU C" >&5
+echo "configure:2016: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2048: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2044: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2115: checking for $ac_word" >&5
+echo "configure:2111: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2147: checking for $ac_word" >&5
+echo "configure:2143: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2180: checking whether compiler driver understands Ada" >&5
+echo "configure:2176: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2212: checking how to compare bootstrapped objects" >&5
+echo "configure:2208: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2310: checking for correct version of gmp.h" >&5
+echo "configure:2306: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2312 "configure"
+#line 2308 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2323: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2336: checking for MPFR" >&5
+echo "configure:2332: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2341 "configure"
+#line 2337 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
esac
# Disable languages that need other directories if these aren't available.
- for i in $subdir_requires .; do
+ for i in $subdir_requires; do
test -f "$srcdir/gcc/$i/config-lang.in" && continue
case ,${enable_languages}, in
*,${language},*)
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3455: checking for $ac_word" >&5
+echo "configure:3451: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3495: checking for $ac_word" >&5
+echo "configure:3491: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3534: checking for $ac_word" >&5
+echo "configure:3530: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3573: checking for $ac_word" >&5
+echo "configure:3569: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3613: checking for $ac_word" >&5
+echo "configure:3609: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3652: checking for $ac_word" >&5
+echo "configure:3648: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3705: checking for $ac_word" >&5
+echo "configure:3701: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3746: checking for $ac_word" >&5
+echo "configure:3742: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3794: checking for $ac_word" >&5
+echo "configure:3790: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3825: checking for $ac_word" >&5
+echo "configure:3821: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3869: checking for $ac_word" >&5
+echo "configure:3865: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3900: checking for $ac_word" >&5
+echo "configure:3896: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3944: checking for $ac_word" >&5
+echo "configure:3940: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3975: checking for $ac_word" >&5
+echo "configure:3971: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4019: checking for $ac_word" >&5
+echo "configure:4015: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4050: checking for $ac_word" >&5
+echo "configure:4046: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4094: checking for $ac_word" >&5
+echo "configure:4090: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4125: checking for $ac_word" >&5
+echo "configure:4121: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4169: checking for $ac_word" >&5
+echo "configure:4165: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4200: checking for $ac_word" >&5
+echo "configure:4196: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4244: checking for $ac_word" >&5
+echo "configure:4240: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4275: checking for $ac_word" >&5
+echo "configure:4271: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4314: checking for $ac_word" >&5
+echo "configure:4310: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4345: checking for $ac_word" >&5
+echo "configure:4341: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4384: checking for $ac_word" >&5
+echo "configure:4380: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4415: checking for $ac_word" >&5
+echo "configure:4411: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4459: checking for $ac_word" >&5
+echo "configure:4455: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4490: checking for $ac_word" >&5
+echo "configure:4486: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4534: checking for $ac_word" >&5
+echo "configure:4530: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4565: checking for $ac_word" >&5
+echo "configure:4561: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4629: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4625: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4646: checking for $ac_word" >&5
+echo "configure:4642: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4677: checking for $ac_word" >&5
+echo "configure:4673: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4720: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4716: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4737: checking for $ac_word" >&5
+echo "configure:4733: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4768: checking for $ac_word" >&5
+echo "configure:4764: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4811: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4807: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4828: checking for $ac_word" >&5
+echo "configure:4824: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4859: checking for $ac_word" >&5
+echo "configure:4855: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4897: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4893: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4914: checking for $ac_word" >&5
+echo "configure:4910: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4945: checking for $ac_word" >&5
+echo "configure:4941: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4988: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4984: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5005: checking for $ac_word" >&5
+echo "configure:5001: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5036: checking for $ac_word" >&5
+echo "configure:5032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5143: checking for ar in $with_build_time_tools" >&5
+echo "configure:5139: checking for ar in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ar; then
AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5161: checking for $ac_word" >&5
+echo "configure:5157: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5198: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5194: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5215: checking for $ac_word" >&5
+echo "configure:5211: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5246: checking for $ac_word" >&5
+echo "configure:5242: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5296: checking for as in $with_build_time_tools" >&5
+echo "configure:5292: checking for as in $with_build_time_tools" >&5
if test -x $with_build_time_tools/as; then
AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5314: checking for $ac_word" >&5
+echo "configure:5310: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5351: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5347: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5368: checking for $ac_word" >&5
+echo "configure:5364: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5399: checking for $ac_word" >&5
+echo "configure:5395: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5449: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5445: checking for dlltool in $with_build_time_tools" >&5
if test -x $with_build_time_tools/dlltool; then
DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5467: checking for $ac_word" >&5
+echo "configure:5463: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5504: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5500: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5521: checking for $ac_word" >&5
+echo "configure:5517: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5552: checking for $ac_word" >&5
+echo "configure:5548: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5602: checking for ld in $with_build_time_tools" >&5
+echo "configure:5598: checking for ld in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ld; then
LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5620: checking for $ac_word" >&5
+echo "configure:5616: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5657: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5653: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5674: checking for $ac_word" >&5
+echo "configure:5670: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5705: checking for $ac_word" >&5
+echo "configure:5701: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5755: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5751: checking for lipo in $with_build_time_tools" >&5
if test -x $with_build_time_tools/lipo; then
LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5773: checking for $ac_word" >&5
+echo "configure:5769: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5810: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5806: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5827: checking for $ac_word" >&5
+echo "configure:5823: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5858: checking for $ac_word" >&5
+echo "configure:5854: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5908: checking for nm in $with_build_time_tools" >&5
+echo "configure:5904: checking for nm in $with_build_time_tools" >&5
if test -x $with_build_time_tools/nm; then
NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5926: checking for $ac_word" >&5
+echo "configure:5922: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5963: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5959: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5980: checking for $ac_word" >&5
+echo "configure:5976: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6011: checking for $ac_word" >&5
+echo "configure:6007: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6061: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6057: checking for objdump in $with_build_time_tools" >&5
if test -x $with_build_time_tools/objdump; then
OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6079: checking for $ac_word" >&5
+echo "configure:6075: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6116: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6112: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6133: checking for $ac_word" >&5
+echo "configure:6129: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6164: checking for $ac_word" >&5
+echo "configure:6160: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6214: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6210: checking for ranlib in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ranlib; then
RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6232: checking for $ac_word" >&5
+echo "configure:6228: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6269: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6265: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6286: checking for $ac_word" >&5
+echo "configure:6282: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6317: checking for $ac_word" >&5
+echo "configure:6313: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6367: checking for strip in $with_build_time_tools" >&5
+echo "configure:6363: checking for strip in $with_build_time_tools" >&5
if test -x $with_build_time_tools/strip; then
STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6385: checking for $ac_word" >&5
+echo "configure:6381: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6422: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6418: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6439: checking for $ac_word" >&5
+echo "configure:6435: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6470: checking for $ac_word" >&5
+echo "configure:6466: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6520: checking for windres in $with_build_time_tools" >&5
+echo "configure:6516: checking for windres in $with_build_time_tools" >&5
if test -x $with_build_time_tools/windres; then
WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6538: checking for $ac_word" >&5
+echo "configure:6534: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6575: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6571: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6592: checking for $ac_word" >&5
+echo "configure:6588: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6623: checking for $ac_word" >&5
+echo "configure:6619: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6671: checking where to find the target ar" >&5
+echo "configure:6667: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6704: checking where to find the target as" >&5
+echo "configure:6700: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6737: checking where to find the target cc" >&5
+echo "configure:6733: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6770: checking where to find the target c++" >&5
+echo "configure:6766: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6806: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6802: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6842: checking where to find the target dlltool" >&5
+echo "configure:6838: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6875: checking where to find the target gcc" >&5
+echo "configure:6871: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6908: checking where to find the target gcj" >&5
+echo "configure:6904: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6944: checking where to find the target gfortran" >&5
+echo "configure:6940: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6980: checking where to find the target ld" >&5
+echo "configure:6976: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:7013: checking where to find the target lipo" >&5
+echo "configure:7009: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:7036: checking where to find the target nm" >&5
+echo "configure:7032: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7069: checking where to find the target objdump" >&5
+echo "configure:7065: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7102: checking where to find the target ranlib" >&5
+echo "configure:7098: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7135: checking where to find the target strip" >&5
+echo "configure:7131: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7168: checking where to find the target windres" >&5
+echo "configure:7164: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7229: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7225: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
;;
esac
+# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
+if test "$GCC" = yes; then
+ saved_CFLAGS="$CFLAGS"
+
+ # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
+ CFLAGS="$CFLAGS -fkeep-inline-functions"
+ echo $ac_n "checking whether -fkeep-inline-functions is supported""... $ac_c" 1>&6
+echo "configure:7274: checking whether -fkeep-inline-functions is supported" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 7276 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:7283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+ CFLAGS="$saved_CFLAGS"
+fi
+
+
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
OSDN Git Service
