2006-11-07 Benjamin Kosnik <bkoz@redhat.com>

[pf3gnuchains/gcc-fork.git] / configure

diff --git a/configure b/configure
index 36927a3..175c280 100755 (executable)
--- a/configure
+++ b/configure
@@ -12,12 +12,12 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
+  --with-build-libsubdir=[DIR]  Directory where to find libraries for build system"
+ac_help="$ac_help
   --enable-libada        Builds libada directory"
 ac_help="$ac_help
   --enable-libssp        Builds libssp directory"
 ac_help="$ac_help
-  --enable-libgcc-math   Builds libgcc-math directory"
-ac_help="$ac_help
   --with-mpfr-dir=PATH    Specify source directory for MPFR library"
 ac_help="$ac_help
   --with-mpfr=PATH        Specify directory for installed MPFR library"
@@ -26,6 +26,9 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gmp=PATH         Specify directory for installed GMP library"
 ac_help="$ac_help
+  --enable-objc-gc       enable the use of Boehm's garbage collector with
+                          the GNU Objective-C runtime."
+ac_help="$ac_help
   --with-build-sysroot=sysroot
                           use sysroot as the system root during the build"
 ac_help="$ac_help
@@ -43,6 +46,12 @@ ac_help="$ac_help
                           (and sometimes confusing) to the casual installer"
 ac_help="$ac_help
   --enable-werror         enable -Werror in bootstrap stage2 and later"
+ac_help="$ac_help
+  --with-datarootdir   Use datarootdir as the data root directory."
+ac_help="$ac_help
+  --with-docdir        Install documentation in this directory."
+ac_help="$ac_help
+  --with-htmldir       Install html in this directory."
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -601,7 +610,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:605: checking host system type" >&5
+echo "configure:614: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -622,7 +631,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:626: checking target system type" >&5
+echo "configure:635: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -640,7 +649,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:644: checking build system type" >&5
+echo "configure:653: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -695,7 +704,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:699: checking for a BSD compatible install" >&5
+echo "configure:708: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -748,7 +757,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:752: checking whether ln works" >&5
+echo "configure:761: checking whether ln works" >&5
 if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -772,7 +781,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:776: checking whether ln -s works" >&5
+echo "configure:785: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -897,7 +906,6 @@ host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
-       target-boehm-gc \
        target-zlib \
        target-qthreads \
        target-libjava"
@@ -911,8 +919,8 @@ target_libraries="target-libiberty \
                target-libstdc++-v3 \
                target-libmudflap \
                target-libssp \
-               target-libgcc-math \
                target-libgfortran \
+               target-boehm-gc \
                ${libgcj} \
                target-libobjc \
                target-libada \
@@ -969,8 +977,26 @@ esac
   *) target_noncanonical=${target_alias} ;;
 esac
 
-  # Prefix 'build-' so this never conflicts with target_subdir.
+  
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
 build_subdir="build-${build_noncanonical}"
+# Check whether --with-build-libsubdir or --without-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then
+  withval="$with_build_libsubdir"
+  build_libsubdir="$withval"
+else
+  build_libsubdir="$build_subdir"
+fi
+
 # --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
 if ( test $srcdir = . && test -d gcc ) \
    || test -d $srcdir/../host-${host_noncanonical}; then
@@ -980,7 +1006,7 @@ else
 fi
 # No prefix.
 target_subdir=${target_noncanonical}
-   
+    
 
 # Skipdirs are removed silently.
 skipdirs=
@@ -1016,7 +1042,7 @@ esac
 
 # Some tools are only suitable for building in a "native" situation.
 # Remove these if host!=target.  
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
 
 # Similarly, some are only suitable for cross toolchains.
 # Remove these if host=target.
@@ -1069,7 +1095,7 @@ case "${host}" in
     ;;
   i[3456789]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
     ;;
   i[3456789]86-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl libgui gdb"
@@ -1110,23 +1136,6 @@ else
 fi
 
 
-# Set the default so we build libgcc-math for ix86 and x86_64
-# Check whether --enable-libgcc-math or --disable-libgcc-math was given.
-if test "${enable_libgcc_math+set}" = set; then
-  enableval="$enable_libgcc_math"
-  :
-else
-  
-case "${target}" in
-  i?86-* | x86_64-* )
-    enable_libgcc_math=yes ;;
-  *)
-    enable_libgcc_math=no ;;
-esac
-
-fi
-
-
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -1168,7 +1177,7 @@ if test x$enable_libgomp = x ; then
        ;;
     *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
        ;;
-    *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
+    *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
        ;;
     *-*-darwin* | *-*-aix*)
        ;;
@@ -1322,7 +1331,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   bfin-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss gdb"
+    noconfigdirs="$noconfigdirs gdb"
     if test x${is_cross_compiler} != xno ; then
       target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
@@ -1386,6 +1395,9 @@ case "${target}" in
   hppa*64*-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
+  hppa*-hp-hpux11*)
+    noconfigdirs="$noconfigdirs ld shellutils"
+    ;;
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
@@ -1427,32 +1439,18 @@ case "${target}" in
     # 'target-newlib' will appear in skipdirs.
     ;;
   i[3456789]86-*-mingw32*)
-    target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-
-    # Can't build gdb for mingw32 if not native.
-    case "${host}" in
-      i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
-         ;;
-    esac
+    target_configdirs="$target_configdirs target-winsup"
+    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
     noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
     # always build newlib if winsup directory is present.
-    if test -d "$srcdir/winsup"; then
+    if test -d "$srcdir/winsup/cygwin"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     elif test -d "$srcdir/newlib"; then
-      echo "Warning: winsup is missing so newlib can't be built."
+      echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
-
-    # Can't build gdb for Cygwin if not native.
-    case "${host}" in
-      *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
-         ;;
-    esac
     ;;    
   i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
   i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
@@ -1554,17 +1552,11 @@ case "${target}" in
     # <oldham@codesourcery.com>
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
-  mips*-dec-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
-    ;;
   mips*-*-bsd*)
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
-  mipstx39-*-*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"   # same as generic mips
-    ;;
   mips64*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   mips*-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -1606,6 +1598,9 @@ case "${target}" in
     ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
+  spu-*-*)
+    skipdirs="target-libiberty"
+    ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
     ;;
@@ -1854,7 +1849,7 @@ else
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1858: checking for $ac_word" >&5
+echo "configure:1850: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1884,7 +1879,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1888: checking for $ac_word" >&5
+echo "configure:1880: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1935,7 +1930,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1939: checking for $ac_word" >&5
+echo "configure:1931: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1967,7 +1962,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1963: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1978,12 +1973,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1982 "configure"
+#line 1974 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2009,12 +2004,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2005: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2018: checking whether we are using GNU C" >&5
+echo "configure:2010: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2023,7 +2018,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2042,7 +2037,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2038: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2109,7 +2104,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2113: checking for $ac_word" >&5
+echo "configure:2105: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2141,7 +2136,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2145: checking for $ac_word" >&5
+echo "configure:2137: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2174,7 +2169,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2178: checking whether compiler driver understands Ada" >&5
+echo "configure:2170: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2206,7 +2201,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2210: checking how to compare bootstrapped objects" >&5
+echo "configure:2202: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2251,7 +2246,13 @@ fi
 
 if test "x$with_mpfr_dir" != x; then
   gmpinc="-I$with_mpfr_dir"
-  gmplibs="$with_mpfr_dir/libmpfr.a"
+  if test -f "$with_mpfr_dir/.libs/libmpfr.a"; then
+    gmplibs="$with_mpfr_dir/.libs/libmpfr.a"
+  elif test -f "$with_mpfr_dir/_libs/libmpfr.a"; then
+    gmplibs="$with_mpfr_dir/_libs/libmpfr.a"
+  else
+    gmplibs="$with_mpfr_dir/libmpfr.a"
+  fi
 else
   gmplibs="-lmpfr"
 fi
@@ -2304,20 +2305,20 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2308: checking for correct version of gmp.h" >&5
+echo "configure:2306: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2310 "configure"
+#line 2308 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
 
-#if __GNU_MP_VERSION < 3
+#if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
 choke me
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2329,21 +2330,25 @@ fi
 rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
-  echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2334: checking for MPFR" >&5
-
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
+  echo $ac_n "checking for correct version of mpfr.h""... $ac_c" 1>&6
+echo "configure:2334: checking for correct version of mpfr.h" >&5
   cat > conftest.$ac_ext <<EOF
-#line 2339 "configure"
+#line 2336 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
 int main() {
-mpfr_t n; mpfr_init(n);
+
+#if MPFR_VERSION_MAJOR < 2 || (MPFR_VERSION_MAJOR == 2 && MPFR_VERSION_MINOR < 2)
+  choke me
+#endif
+  mpfr_t n; mpfr_init(n);
+
 ; return 0; }
 EOF
-if { (eval echo configure:2347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2357,6 +2362,14 @@ rm -f conftest*
 fi
 CFLAGS="$saved_CFLAGS"
 
+if test -d ${srcdir}/gcc && test x$have_gmp != xyes; then
+  { echo "configure: error: Building GCC requires GMP 4.1+ and MPFR 2.2+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info." 1>&2; exit 1; }
+fi
+
 # Flags needed for both GMP and/or MPFR
 
 
@@ -2441,9 +2454,9 @@ if test -d ${srcdir}/gcc; then
         language=
         target_libs=
         lang_dirs=
+        subdir_requires=
         boot_language=
         build_by_default=
-        need_gmp=
         . ${lang_frag}
         potential_languages="${potential_languages},${language}"
         # This is quite sensitive to the ordering of the case statement arms.
@@ -2474,17 +2487,20 @@ if test -d ${srcdir}/gcc; then
             ;;
         esac
 
-        # Disable languages that need GMP if it isn't available.
-        case ,${enable_languages},:${have_gmp}:${need_gmp} in
-          *,${language},*:no:yes)
-            # Specifically requested language; tell them.
-            { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
-            ;;
-          *:no:yes)
-            # Silently disable.
-            add_this_lang=no
-            ;;
-        esac
+        # Disable languages that need other directories if these aren't available.
+       for i in $subdir_requires; do
+         test -f "$srcdir/gcc/$i/config-lang.in" && continue
+         case ,${enable_languages}, in
+            *,${language},*)
+              # Specifically requested language; tell them.
+              { echo "configure: error: The gcc/$i directory contains parts of $language but is missing" 1>&2; exit 1; }
+              ;;
+            *)
+              # Silently disable.
+              add_this_lang=no
+              ;;
+          esac
+       done
 
        # Disable a language that is unsupported by the target.
        case " $unsupported_languages " in
@@ -2535,6 +2551,31 @@ for dir in $configdirs $build_configdirs $target_configdirs ; do
   fi
 done
 
+# Check for Boehm's garbage collector
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+  enableval="$enable_objc_gc"
+  case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+  *,objc,*:*:yes:*target-boehm-gc*)
+    { echo "configure: error: Boehm's garbage collector was requested yet not supported in this configuration" 1>&2; exit 1; }
+    ;;
+esac
+fi
+
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+  *,objc,*:yes)
+    # Keep target-boehm-gc if requested for Objective-C.
+    ;;
+  *)
+    # Otherwise remove target-boehm-gc depending on target-libjava.
+    if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+      noconfigdirs="$noconfigdirs target-boehm-gc"
+    fi
+    ;;
+esac
+
 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
 # $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
@@ -3327,6 +3368,11 @@ case " $target_configdirs " in
   esac
   ;;
 esac
+case "$target" in
+*-mingw*)
+  # Can't be handled as Cygwin above since Mingw does not use newlib.
+  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+esac
 
 # Allow the user to override the flags for
 # our build compiler if desired.
@@ -3408,7 +3454,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3412: checking for $ac_word" >&5
+echo "configure:3455: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3448,7 +3494,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3452: checking for $ac_word" >&5
+echo "configure:3495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3487,7 +3533,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3491: checking for $ac_word" >&5
+echo "configure:3534: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3526,7 +3572,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3530: checking for $ac_word" >&5
+echo "configure:3573: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3566,7 +3612,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3570: checking for $ac_word" >&5
+echo "configure:3613: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3605,7 +3651,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3609: checking for $ac_word" >&5
+echo "configure:3652: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3658,7 +3704,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3662: checking for $ac_word" >&5
+echo "configure:3705: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3699,7 +3745,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3703: checking for $ac_word" >&5
+echo "configure:3746: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3731,7 +3777,7 @@ test -n "$RUNTEST" || RUNTEST="runtest"
 
 case " $configdirs " in
   *" dejagnu "*)
-    test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+    test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
     ;;
 esac
 
@@ -3747,7 +3793,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3751: checking for $ac_word" >&5
+echo "configure:3794: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3778,7 +3824,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3782: checking for $ac_word" >&5
+echo "configure:3825: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3822,7 +3868,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3826: checking for $ac_word" >&5
+echo "configure:3869: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3853,7 +3899,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3857: checking for $ac_word" >&5
+echo "configure:3900: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3897,7 +3943,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3901: checking for $ac_word" >&5
+echo "configure:3944: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3928,7 +3974,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3932: checking for $ac_word" >&5
+echo "configure:3975: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3972,7 +4018,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3976: checking for $ac_word" >&5
+echo "configure:4019: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4003,7 +4049,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4007: checking for $ac_word" >&5
+echo "configure:4050: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4047,7 +4093,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4051: checking for $ac_word" >&5
+echo "configure:4094: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4078,7 +4124,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4082: checking for $ac_word" >&5
+echo "configure:4125: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4122,7 +4168,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4126: checking for $ac_word" >&5
+echo "configure:4169: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4153,7 +4199,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4157: checking for $ac_word" >&5
+echo "configure:4200: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4197,7 +4243,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4201: checking for $ac_word" >&5
+echo "configure:4244: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4228,7 +4274,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4232: checking for $ac_word" >&5
+echo "configure:4275: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4267,7 +4313,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4271: checking for $ac_word" >&5
+echo "configure:4314: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4298,7 +4344,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4302: checking for $ac_word" >&5
+echo "configure:4345: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4337,7 +4383,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4341: checking for $ac_word" >&5
+echo "configure:4384: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4368,7 +4414,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4372: checking for $ac_word" >&5
+echo "configure:4415: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4412,7 +4458,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4416: checking for $ac_word" >&5
+echo "configure:4459: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4443,7 +4489,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4447: checking for $ac_word" >&5
+echo "configure:4490: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4487,7 +4533,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4491: checking for $ac_word" >&5
+echo "configure:4534: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4518,7 +4564,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4522: checking for $ac_word" >&5
+echo "configure:4565: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4582,7 +4628,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in cc gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4586: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4629: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4599,7 +4645,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4603: checking for $ac_word" >&5
+echo "configure:4646: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4630,7 +4676,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4634: checking for $ac_word" >&5
+echo "configure:4677: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4673,7 +4719,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in c++ g++ cxx gxx; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4677: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4720: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4690,7 +4736,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4694: checking for $ac_word" >&5
+echo "configure:4737: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4721,7 +4767,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4725: checking for $ac_word" >&5
+echo "configure:4768: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4764,7 +4810,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4768: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4811: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4781,7 +4827,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4785: checking for $ac_word" >&5
+echo "configure:4828: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4812,7 +4858,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4816: checking for $ac_word" >&5
+echo "configure:4859: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4850,7 +4896,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcj; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4854: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4897: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4867,7 +4913,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4871: checking for $ac_word" >&5
+echo "configure:4914: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4898,7 +4944,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4902: checking for $ac_word" >&5
+echo "configure:4945: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4941,7 +4987,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gfortran; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4945: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4988: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4958,7 +5004,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4962: checking for $ac_word" >&5
+echo "configure:5005: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4989,7 +5035,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4993: checking for $ac_word" >&5
+echo "configure:5036: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5096,7 +5142,7 @@ rm conftest.c
 if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5100: checking for ar in $with_build_time_tools" >&5
+echo "configure:5143: checking for ar in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ar; then
       AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
       ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
@@ -5114,7 +5160,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5118: checking for $ac_word" >&5
+echo "configure:5161: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5151,7 +5197,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ar; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5155: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5198: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5168,7 +5214,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5215: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5199,7 +5245,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5203: checking for $ac_word" >&5
+echo "configure:5246: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5249,7 +5295,7 @@ fi
 if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5253: checking for as in $with_build_time_tools" >&5
+echo "configure:5296: checking for as in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/as; then
       AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
       ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
@@ -5267,7 +5313,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5271: checking for $ac_word" >&5
+echo "configure:5314: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5304,7 +5350,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in as; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5308: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5351: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5321,7 +5367,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5325: checking for $ac_word" >&5
+echo "configure:5368: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5352,7 +5398,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5356: checking for $ac_word" >&5
+echo "configure:5399: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5402,7 +5448,7 @@ fi
 if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5406: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5449: checking for dlltool in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/dlltool; then
       DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
       ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
@@ -5420,7 +5466,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5424: checking for $ac_word" >&5
+echo "configure:5467: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5457,7 +5503,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in dlltool; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5461: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5504: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5474,7 +5520,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5478: checking for $ac_word" >&5
+echo "configure:5521: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5505,7 +5551,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5509: checking for $ac_word" >&5
+echo "configure:5552: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5555,7 +5601,7 @@ fi
 if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5559: checking for ld in $with_build_time_tools" >&5
+echo "configure:5602: checking for ld in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ld; then
       LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
       ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
@@ -5573,7 +5619,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5577: checking for $ac_word" >&5
+echo "configure:5620: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5610,7 +5656,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ld; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5614: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5657: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5627,7 +5673,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5631: checking for $ac_word" >&5
+echo "configure:5674: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5658,7 +5704,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5662: checking for $ac_word" >&5
+echo "configure:5705: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5708,7 +5754,7 @@ fi
 if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5712: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5755: checking for lipo in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/lipo; then
       LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
       ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
@@ -5726,7 +5772,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5730: checking for $ac_word" >&5
+echo "configure:5773: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5763,7 +5809,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in lipo; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5767: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5810: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5780,7 +5826,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5784: checking for $ac_word" >&5
+echo "configure:5827: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5811,7 +5857,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5815: checking for $ac_word" >&5
+echo "configure:5858: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5861,7 +5907,7 @@ fi
 if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5865: checking for nm in $with_build_time_tools" >&5
+echo "configure:5908: checking for nm in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/nm; then
       NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
       ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
@@ -5879,7 +5925,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5883: checking for $ac_word" >&5
+echo "configure:5926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5916,7 +5962,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in nm; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5920: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5963: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5933,7 +5979,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5937: checking for $ac_word" >&5
+echo "configure:5980: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5964,7 +6010,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5968: checking for $ac_word" >&5
+echo "configure:6011: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6014,7 +6060,7 @@ fi
 if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6018: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6061: checking for objdump in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/objdump; then
       OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
       ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
@@ -6032,7 +6078,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6036: checking for $ac_word" >&5
+echo "configure:6079: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6069,7 +6115,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in objdump; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6073: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6116: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6086,7 +6132,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6090: checking for $ac_word" >&5
+echo "configure:6133: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6117,7 +6163,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6121: checking for $ac_word" >&5
+echo "configure:6164: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6167,7 +6213,7 @@ fi
 if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6171: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6214: checking for ranlib in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ranlib; then
       RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
       ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
@@ -6185,7 +6231,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6189: checking for $ac_word" >&5
+echo "configure:6232: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6222,7 +6268,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ranlib; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6226: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6269: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6239,7 +6285,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6243: checking for $ac_word" >&5
+echo "configure:6286: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6270,7 +6316,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6274: checking for $ac_word" >&5
+echo "configure:6317: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6320,7 +6366,7 @@ fi
 if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6324: checking for strip in $with_build_time_tools" >&5
+echo "configure:6367: checking for strip in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/strip; then
       STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
       ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
@@ -6338,7 +6384,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6342: checking for $ac_word" >&5
+echo "configure:6385: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6375,7 +6421,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in strip; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6379: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6422: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6392,7 +6438,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6396: checking for $ac_word" >&5
+echo "configure:6439: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6423,7 +6469,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6427: checking for $ac_word" >&5
+echo "configure:6470: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6473,7 +6519,7 @@ fi
 if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6477: checking for windres in $with_build_time_tools" >&5
+echo "configure:6520: checking for windres in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/windres; then
       WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
       ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
@@ -6491,7 +6537,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6495: checking for $ac_word" >&5
+echo "configure:6538: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6528,7 +6574,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in windres; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6532: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6575: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6545,7 +6591,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6549: checking for $ac_word" >&5
+echo "configure:6592: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6576,7 +6622,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6580: checking for $ac_word" >&5
+echo "configure:6623: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6624,7 +6670,7 @@ fi
 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 
 echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6628: checking where to find the target ar" >&5
+echo "configure:6671: checking where to find the target ar" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6657,7 +6703,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6661: checking where to find the target as" >&5
+echo "configure:6704: checking where to find the target as" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6690,7 +6736,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6694: checking where to find the target cc" >&5
+echo "configure:6737: checking where to find the target cc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6723,7 +6769,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6727: checking where to find the target c++" >&5
+echo "configure:6770: checking where to find the target c++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6759,7 +6805,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6763: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6806: checking where to find the target c++ for libstdc++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6795,7 +6841,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6799: checking where to find the target dlltool" >&5
+echo "configure:6842: checking where to find the target dlltool" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6828,7 +6874,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6832: checking where to find the target gcc" >&5
+echo "configure:6875: checking where to find the target gcc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6861,7 +6907,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6865: checking where to find the target gcj" >&5
+echo "configure:6908: checking where to find the target gcj" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6897,7 +6943,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6901: checking where to find the target gfortran" >&5
+echo "configure:6944: checking where to find the target gfortran" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6933,7 +6979,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6937: checking where to find the target ld" >&5
+echo "configure:6980: checking where to find the target ld" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6966,7 +7012,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6970: checking where to find the target lipo" >&5
+echo "configure:7013: checking where to find the target lipo" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6989,7 +7035,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:6993: checking where to find the target nm" >&5
+echo "configure:7036: checking where to find the target nm" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7022,7 +7068,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7026: checking where to find the target objdump" >&5
+echo "configure:7069: checking where to find the target objdump" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7055,7 +7101,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7059: checking where to find the target ranlib" >&5
+echo "configure:7102: checking where to find the target ranlib" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7088,7 +7134,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7092: checking where to find the target strip" >&5
+echo "configure:7135: checking where to find the target strip" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7121,7 +7167,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7125: checking where to find the target windres" >&5
+echo "configure:7168: checking where to find the target windres" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7182,7 +7228,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7186: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7229: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -7224,6 +7270,37 @@ case $build in
     ;;
 esac
 
+# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
+if test "$GCC" = yes; then
+  saved_CFLAGS="$CFLAGS"
+
+  # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
+  CFLAGS="$CFLAGS -fkeep-inline-functions"
+  echo $ac_n "checking whether -fkeep-inline-functions is supported""... $ac_c" 1>&6
+echo "configure:7278: checking whether -fkeep-inline-functions is supported" >&5
+  cat > conftest.$ac_ext <<EOF
+#line 7280 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:7287: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  echo "$ac_t""yes" 1>&6; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+  CFLAGS="$saved_CFLAGS"
+fi
+
+
 
 # Enable -Werror in bootstrap stage2 and later.
 # Change the default to "no" on release branches.
@@ -7241,6 +7318,38 @@ case ${enable_werror} in
 esac
 
 
+# Flags needed to enable html installing and building
+# Check whether --with-datarootdir or --without-datarootdir was given.
+if test "${with_datarootdir+set}" = set; then
+  withval="$with_datarootdir"
+  datarootdir="\${prefix}/${withval}"
+else
+  datarootdir="\${prefix}/share"
+fi
+
+
+# Check whether --with-docdir or --without-docdir was given.
+if test "${with_docdir+set}" = set; then
+  withval="$with_docdir"
+  docdir="\${prefix}/${withval}"
+else
+  docdir="\${datarootdir}/doc"
+fi
+
+
+# Check whether --with-htmldir or --without-htmldir was given.
+if test "${with_htmldir+set}" = set; then
+  withval="$with_htmldir"
+  htmldir="\${prefix}/${withval}"
+else
+  htmldir="\${docdir}"
+fi
+
+
+
+
+
+
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -7307,34 +7416,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[   ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\),-D\1=\2,g
-t quote
-s,^[   ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[    `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -7426,6 +7516,7 @@ s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@LN@%$LN%g
 s%@LN_S@%$LN_S%g
 s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+s%@build_libsubdir@%$build_libsubdir%g
 s%@build_subdir@%$build_subdir%g
 s%@host_subdir@%$host_subdir%g
 s%@target_subdir@%$target_subdir%g
@@ -7505,6 +7596,9 @@ s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
 s%@stage1_cflags@%$stage1_cflags%g
 s%@stage2_werror_flag@%$stage2_werror_flag%g
+s%@datarootdir@%$datarootdir%g
+s%@docdir@%$docdir%g
+s%@htmldir@%$htmldir%g
 
 CEOF
 EOF