+fi;
+
+
+# Check whether --with-gmp or --without-gmp was given.
+if test "${with_gmp+set}" = set; then
+ withval="$with_gmp"
+
+fi;
+
+# Check whether --with-gmp_include or --without-gmp_include was given.
+if test "${with_gmp_include+set}" = set; then
+ withval="$with_gmp_include"
+
+fi;
+
+# Check whether --with-gmp_lib or --without-gmp_lib was given.
+if test "${with_gmp_lib+set}" = set; then
+ withval="$with_gmp_lib"
+
+fi;
+
+
+if test "x$with_gmp" != x; then
+ gmplibs="-L$with_gmp/lib $gmplibs"
+ gmpinc="-I$with_gmp/include $gmpinc"
+fi
+if test "x$with_gmp_include" != x; then
+ gmpinc="-I$with_gmp_include $gmpinc"
+fi
+if test "x$with_gmp_lib" != x; then
+ gmplibs="-L$with_gmp_lib $gmplibs"
+fi
+if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
+ gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
+ # Do not test the gmp version. Assume that it is sufficient, since
+ # it is in the source tree, and the library has not been built yet
+ # but it would be included on the link line in the version check below
+ # hence making the test fail.
+ have_gmp=yes
+fi
+
+if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
+ have_gmp=yes
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $gmpinc"
+ # Check GMP actually works
+ echo "$as_me:$LINENO: checking for correct version of gmp.h" >&5
+echo $ECHO_N "checking for correct version of gmp.h... $ECHO_C" >&6
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include "gmp.h"
+int
+main ()
+{
+
+ #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
+ choke me
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test x"$have_gmp" = xyes; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ echo "$as_me:$LINENO: checking for correct version of mpfr.h" >&5
+echo $ECHO_N "checking for correct version of mpfr.h... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <gmp.h>
+ #include <mpfr.h>
+int
+main ()
+{
+
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,0)
+ choke me
+ #endif
+ mpfr_t n;
+ mpfr_t x;
+ int t;
+ mpfr_init (n);
+ mpfr_init (x);
+ mpfr_atan2 (n, n, x, GMP_RNDN);
+ mpfr_erfc (n, x, GMP_RNDN);
+ mpfr_subnormalize (x, t, GMP_RNDN);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <gmp.h>
+ #include <mpfr.h>
+int
+main ()
+{
+
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ choke me
+ #endif
+ mpfr_t n; mpfr_init(n);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: buggy but acceptable" >&5
+echo "${ECHO_T}buggy but acceptable" >&6
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$saved_LIBS"
+ fi
+ CFLAGS="$saved_CFLAGS"
+
+ if test x$have_gmp != xyes; then
+ { { echo "$as_me:$LINENO: error: Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info.
+If you obtained GMP and/or MPFR from a vendor distribution package, make
+sure that you have installed both the libraries and the header files.
+They may be located in separate packages." >&5
+echo "$as_me: error: Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info.
+If you obtained GMP and/or MPFR from a vendor distribution package, make
+sure that you have installed both the libraries and the header files.
+They may be located in separate packages." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+fi
+
+# Flags needed for both GMP and/or MPFR
+
+
+
+# By default, C is the only stage 1 language.
+stage1_languages=,c,
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test -d ${srcdir}/gcc; then
+ if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+ else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+ fi
+ enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
+ # First scan to see if an enabled language requires some other language.
+ # We assume that a given config-lang.in will list all the language
+ # front ends it requires, even if some are required indirectly.
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $lang_requires
+ language=
+ lang_requires=
+ . ${lang_frag}
+ for other in ${lang_requires} ; do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
+ ;;
+ esac
+ done
+ ;;
+ esac
+ done
+
+ new_enable_languages=,c,
+ missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=,c,
+
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, $boot_language, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ subdir_requires=
+ boot_language=no
+ build_by_default=yes
+ . ${lang_frag}
+ if test x${language} = x; then
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Language was explicitly selected; include it.
+ add_this_lang=yes
+ ;;
+ *,all,*)
+ # 'all' was selected, select it if it is a default language
+ add_this_lang=${build_by_default}
+ ;;
+ *)
+ add_this_lang=no
+ ;;
+ esac
+
+ # Disable languages that need other directories if these aren't available.
+ for i in $subdir_requires; do
+ test -f "$srcdir/gcc/$i/config-lang.in" && continue
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Specifically requested language; tell them.
+ { { echo "$as_me:$LINENO: error: The gcc/$i directory contains parts of $language but is missing" >&5
+echo "$as_me: error: The gcc/$i directory contains parts of $language but is missing" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+ done
+
+ # Disable Ada if no preexisting GNAT is available.
+ case ,${enable_languages},:${language}:${have_gnat} in
+ *,${language},*:ada:no)
+ # Specifically requested language; tell them.
+ { { echo "$as_me:$LINENO: error: GNAT is required to build $language" >&5
+echo "$as_me: error: GNAT is required to build $language" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *:ada:no)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ case $add_this_lang in
+ unsupported)
+ # Remove language-dependent dirs.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
+ no)
+ # Remove language-dependent dirs; still show language as supported.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ potential_languages="${potential_languages}${language},"
+ ;;
+ yes)
+ new_enable_languages="${new_enable_languages}${language},"
+ potential_languages="${potential_languages}${language},"
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ case ${boot_language} in
+ yes)
+ # Add to (comma-separated) list of stage 1 languages.
+ stage1_languages="${stage1_languages}${language},"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+
+ # Check whether --enable-stage1-languages or --disable-stage1-languages was given.
+if test "${enable_stage1_languages+set}" = set; then
+ enableval="$enable_stage1_languages"
+ case ,${enable_stage1_languages}, in
+ ,no,|,,)
+ # Set it to something that will have no effect in the loop below
+ enable_stage1_languages=c ;;
+ ,yes,)
+ enable_stage1_languages=`echo $new_enable_languages | \
+ sed -e "s/^,//" -e "s/,$//" ` ;;
+ *,all,*)
+ enable_stage1_languages=`echo ,$enable_stage1_languages, | \
+ sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
+ esac
+
+ # Add "good" languages from enable_stage1_languages to stage1_languages,
+ # while "bad" languages go in missing_languages. Leave no duplicates.
+ for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
+ case $potential_languages in
+ *,$i,*)
+ case $stage1_languages in
+ *,$i,*) ;;
+ *) stage1_languages="$stage1_languages$i," ;;
+ esac ;;
+ *)
+ case $missing_languages in
+ *,$i,*) ;;
+ *) missing_languages="$missing_languages$i," ;;
+ esac ;;
+ esac
+ done
+fi;
+
+ # Remove leading/trailing commas that were added for simplicity
+ potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+ stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
+ new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
+
+ if test "x$missing_languages" != x; then
+ { { echo "$as_me:$LINENO: error:
+The following requested languages could not be built: ${missing_languages}
+Supported languages are: ${potential_languages}" >&5
+echo "$as_me: error:
+The following requested languages could not be built: ${missing_languages}
+Supported languages are: ${potential_languages}" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test "x$new_enable_languages" != "x$enable_languages"; then
+ echo The following languages will be built: ${new_enable_languages}
+ enable_languages="$new_enable_languages"
+ fi
+
+
+ ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[^ ]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" `
+fi
+
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+ if eval test x\${enable_${dirname}} "=" xno ; then
+ noconfigdirs="$noconfigdirs $dir"
+ fi
+done
+
+# Check for Boehm's garbage collector
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+ *,objc,*:*:yes:*target-boehm-gc*)
+ { { echo "$as_me:$LINENO: error: Boehm's garbage collector was requested yet not supported in this configuration" >&5
+echo "$as_me: error: Boehm's garbage collector was requested yet not supported in this configuration" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+fi;
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+ *,objc,*:yes)
+ # Keep target-boehm-gc if requested for Objective-C.
+ ;;
+ *)
+ # Otherwise remove target-boehm-gc depending on target-libjava.
+ if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ fi
+ ;;
+esac
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+# Don't let libgcc imply libiberty either.
+if test -n "${target_configdirs}" ; then
+ libgcc=
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" = "libgcc"; then
+ libgcc=target-libgcc
+ elif test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=$libgcc
+ fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+ j=`echo $i | sed -e s/build-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ build_configdirs="${build_configdirs} $i"
+ fi
+done
+
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+
+# To find our prefix, in gcc_cv_tool_prefix.
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
+fi
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+copy_dirs=
+
+
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi;
+
+
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ x=${gcc_cv_tool_prefix}
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
+ fi
+fi
+
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ x=${gcc_cv_tool_prefix}
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i3456786-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i3456786-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv45* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+ mep*-*-*)
+ target_makefile_frag="config/mt-mep"
+ ;;
+ spu-*-*)
+ target_makefile_frag="config/mt-spu"
+ ;;
+ *-*-netware*)
+ target_makefile_frag="config/mt-netware"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ target_makefile_frag="config/mt-gnu"
+ ;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # commands to handle both 32-bit and 64-bit objects. These flags are
+ # harmless if we're using GNU nm or ar.
+ extra_arflags_for_target=" -X32_64"
+ extra_nmflags_for_target=" -B -X32_64"
+ ;;
+ *-*-darwin*)
+ # ranlib from Darwin requires the -c flag to look at common symbols.
+ extra_ranlibflags_for_target=" -c"
+ ;;
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="config/mt-wince"
+ ;;
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
+ ;;
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ :d30v-*)
+ ospace_frag="config/mt-d30v"
+ ;;
+ :m32r-* | :d10v-* | :fr30-*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ no:* | :*)
+ ;;
+ *)
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+ ;;
+esac
+
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+ case "${target}" in
+ mips*-*-irix[56]*)
+ ;;
+ mips*-*-* | alpha*-*-osf*)
+ with_stabs=yes;
+ extra_host_args="${extra_host_args} --with-stabs"
+ ;;
+ esac
+fi
+
+# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
+# them automatically.
+case "${host}" in
+ hppa*64*-*-hpux11*)
+ extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ ;;
+esac
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='${exec_prefix}'/${target_noncanonical}
+build_tooldir=${tooldir}
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+ ;;
+ esac
+fi
+
+# Make sure that the compiler is able to generate an executable. If it
+# can't, we are probably in trouble. We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created. At this point the main configure script has set CC.
+we_are_ok=no
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
+ fi
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
+rm -f conftest*
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+ sparc-sun-solaris2*)
+ CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
+ if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
+ could_use=
+ test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+ if test -d /opt/cygnus/bin ; then
+ if test "$could_use" = "" ; then
+ could_use="/opt/cygnus/bin"
+ else
+ could_use="$could_use or /opt/cygnus/bin"
+ fi
+ fi
+ if test "$could_use" = "" ; then
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc. You should change your PATH or CC "
+ echo "variable and rerun configure."
+ else
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc, when you should use the C compiler from"
+ echo "$could_use. You should change your"
+ echo "PATH or CC variable and rerun configure."
+ fi
+ fi
+ ;;
+esac
+
+case "${host}" in
+ *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk. Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false. I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
+ *)
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
+ fi
+ ;;
+esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+
+# Strip out unwanted targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+# Loop over modules. $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses. That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later. In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+ enableval="$enable_bootstrap"
+
+else
+ enable_bootstrap=default
+fi;
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. Enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ enable_bootstrap=yes ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes)
+ { echo "$as_me:$LINENO: WARNING: trying to bootstrap a cross compiler" >&5
+echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes)
+ { { echo "$as_me:$LINENO: error: cannot bootstrap without a compiler" >&5
+echo "$as_me: error: cannot bootstrap without a compiler" >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ # Fail if wrong command line
+ *)
+ { { echo "$as_me:$LINENO: error: invalid option for --enable-bootstrap" >&5
+echo "$as_me: error: invalid option for --enable-bootstrap" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+ yes)
+ bootstrap_suffix=bootstrap ;;
+ no)
+ bootstrap_suffix=no-bootstrap ;;
+esac
+
+for module in ${build_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
+done
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
+ fi
+ extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
+done
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+ extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
+done
+
+extrasub="$extrasub
+/^@if /,/^@endif /d"
+
+# Create the serialization dependencies. This uses a temporary file.
+
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+ enableval="$enable_serial_configure"
+
+fi;
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_build_configure}" = xyes &&
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_host_configure}" = xyes &&
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_target_configure}" = xyes &&
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+
+
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target, nonopt, and variable assignments. These are the ones we
+# might not want to pass down to subconfigures. Also strip
+# program-prefix, program-suffix, and program-transform-name, so that
+# we can pass down a consistent program-transform-name.
+baseargs=
+keep_next=no
+skip_next=no
+eval "set -- $ac_configure_args"
+for ac_arg
+do
+ if test X"$skip_next" = X"yes"; then
+ skip_next=no
+ continue
+ fi
+ if test X"$keep_next" = X"yes"; then
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ keep_next=no
+ continue
+ fi
+
+ # Handle separated arguments. Based on the logic generated by
+ # autoconf 2.59.
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ separate_arg=no
+ ;;
+ -*)
+ separate_arg=yes
+ ;;
+ *)
+ separate_arg=no
+ ;;
+ esac
+
+ case "$ac_arg" in
+ --no*)
+ continue
+ ;;
+ --c* | \
+ --sr* | \
+ --ho* | \
+ --bu* | \
+ --t* | \
+ --program-* | \
+ -cache_file* | \
+ -srcdir* | \
+ -host* | \
+ -build* | \
+ -target* | \
+ -program-prefix* | \
+ -program-suffix* | \
+ -program-transform-name* )
+ skip_next=$separate_arg
+ continue
+ ;;
+ -*)
+ # An option. Add it.
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ keep_next=$separate_arg
+ ;;
+ *)
+ # Either a variable assignment, or a nonopt (triplet). Don't
+ # pass it down; let the Makefile handle this.
+ continue
+ ;;
+ esac
+done
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+build_configargs="--cache-file=../config.cache ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
+
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}"
+
+target_configargs=${baseargs}
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if test x${is_cross_compiler} = xyes ; then
+ target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
+fi
+
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+ target_configargs="--enable-multilib ${target_configargs}"
+fi
+
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+ target_configargs="--with-newlib ${target_configargs}"
+fi
+
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
+
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache ${target_configargs}"
+
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+ case " $target_configargs " in
+ *" --with-newlib "*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${srcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ case "${target}-${is_cross_compiler}" in
+ i[3456789]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$target" in
+*-mingw*)
+ # Can't be handled as Cygwin above since Mingw does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+esac
+
+# Allow the user to override the flags for
+# our build compiler if desired.
+CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
+fi
+
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ m32c-*-* )
+ if test -d ${srcdir}/libgloss/m32c; then
+ # This is for crt0.o
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for r8c.ld
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for libnosys.a
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ fi
+ ;;
+ mep*)
+ FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
+ ;;
+esac
+
+# Makefile fragments.
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
+
+
+
+
+
+# Miscellanea: directories, flags, etc.
+
+
+
+
+
+
+
+# Build module lists & subconfigure args.
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+for ac_prog in 'bison -y' byacc yacc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_YACC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_YACC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+ echo "$as_me:$LINENO: result: $YACC" >&5
+echo "${ECHO_T}$YACC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_BISON+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_BISON="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+BISON=$ac_cv_prog_BISON
+if test -n "$BISON"; then
+ echo "$as_me:$LINENO: result: $BISON" >&5
+echo "${ECHO_T}$BISON" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+for ac_prog in gm4 gnum4 m4
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_M4+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$M4"; then
+ ac_cv_prog_M4="$M4" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_M4="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+M4=$ac_cv_prog_M4
+if test -n "$M4"; then
+ echo "$as_me:$LINENO: result: $M4" >&5
+echo "${ECHO_T}$M4" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+ echo "$as_me:$LINENO: result: $LEX" >&5
+echo "${ECHO_T}$LEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_FLEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FLEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+FLEX=$ac_cv_prog_FLEX
+if test -n "$FLEX"; then
+ echo "$as_me:$LINENO: result: $FLEX" >&5
+echo "${ECHO_T}$FLEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKEINFO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MAKEINFO="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+MAKEINFO=$ac_cv_prog_MAKEINFO
+if test -n "$MAKEINFO"; then
+ echo "$as_me:$LINENO: result: $MAKEINFO" >&5
+echo "${ECHO_T}$MAKEINFO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+
+ # For an installed makeinfo, we require it to be from texinfo 4.4 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+for ac_prog in expect
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_EXPECT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$EXPECT"; then
+ ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_EXPECT="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+EXPECT=$ac_cv_prog_EXPECT
+if test -n "$EXPECT"; then
+ echo "$as_me:$LINENO: result: $EXPECT" >&5
+echo "${ECHO_T}$EXPECT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+
+for ac_prog in runtest
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RUNTEST+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RUNTEST"; then
+ ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RUNTEST="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RUNTEST=$ac_cv_prog_RUNTEST
+if test -n "$RUNTEST"; then
+ echo "$as_me:$LINENO: result: $RUNTEST" >&5
+echo "${ECHO_T}$RUNTEST" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+
+
+if test -n "$AR"; then
+ ac_cv_prog_AR=$AR
+elif test -n "$ac_cv_prog_AR"; then
+ AR=$ac_cv_prog_AR
+fi
+
+if test -n "$ac_cv_prog_AR"; then
+ for ncn_progname in ar; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
+ else
+ AR="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$AS"; then
+ ac_cv_prog_AS=$AS
+elif test -n "$ac_cv_prog_AS"; then
+ AS=$ac_cv_prog_AS
+fi
+
+if test -n "$ac_cv_prog_AS"; then
+ for ncn_progname in as; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
+ else
+ AS="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL=$DLLTOOL
+elif test -n "$ac_cv_prog_DLLTOOL"; then
+ DLLTOOL=$ac_cv_prog_DLLTOOL
+fi
+
+if test -n "$ac_cv_prog_DLLTOOL"; then
+ for ncn_progname in dlltool; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
+ else
+ DLLTOOL="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$LD"; then
+ ac_cv_prog_LD=$LD
+elif test -n "$ac_cv_prog_LD"; then
+ LD=$ac_cv_prog_LD
+fi
+
+if test -n "$ac_cv_prog_LD"; then
+ for ncn_progname in ld; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
+
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
+ else
+ LD="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$LIPO"; then
+ ac_cv_prog_LIPO=$LIPO
+elif test -n "$ac_cv_prog_LIPO"; then
+ LIPO=$ac_cv_prog_LIPO
+fi
+
+if test -n "$ac_cv_prog_LIPO"; then
+ for ncn_progname in lipo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in lipo; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LIPO" && break
+done
+
+if test -z "$ac_cv_prog_LIPO" ; then
+ set dummy lipo
+ if test $build = $host ; then
+ LIPO="$2"
+ else
+ LIPO="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$NM"; then
+ ac_cv_prog_NM=$NM
+elif test -n "$ac_cv_prog_NM"; then
+ NM=$ac_cv_prog_NM
+fi
+
+if test -n "$ac_cv_prog_NM"; then
+ for ncn_progname in nm; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+for ncn_progname in nm; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2