gcc:

[pf3gnuchains/gcc-fork.git] / configure.in

diff --git a/configure.in b/configure.in
index eddb5d8..bf37b80 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -226,7 +226,7 @@ esac
 
 # Some tools are only suitable for building in a "native" situation.
 # Remove these if host!=target.  
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
 
 # Similarly, some are only suitable for cross toolchains.
 # Remove these if host=target.
@@ -304,7 +304,6 @@ AC_ARG_ENABLE(libada,
 ENABLE_LIBADA=$enableval,
 ENABLE_LIBADA=yes)
 if test "${ENABLE_LIBADA}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libada"
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
@@ -312,9 +311,6 @@ AC_ARG_ENABLE(libssp,
 [  --enable-libssp        Builds libssp directory],
 ENABLE_LIBSSP=$enableval,
 ENABLE_LIBSSP=yes)
-if test "${ENABLE_LIBSSP}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libssp"
-fi
 
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
@@ -333,14 +329,8 @@ no)
 esac
 
 
-# Allow --disable-libmudflap to exclude target-libmudflap
-case $enable_libmudflap in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libmudflap"
-    ;;
-"")
+# Disable libmudflap on some systems.
+if test x$enable_libmudflap = x ; then
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
         # Enable libmudflap by default in GNU and friends.
@@ -353,16 +343,10 @@ no)
        noconfigdirs="$noconfigdirs target-libmudflap"
        ;;
     esac
-esac
+fi
 
-# Allow --disable-libgomp to exclude target-libgomp
-case $enable_libgomp in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libgomp"
-    ;;
-"")
+# Disable libgomp on non POSIX hosted systems.
+if test x$enable_libgomp = x ; then
     # Enable libgomp by default on hosted POSIX systems.
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
@@ -371,13 +355,13 @@ no)
        ;;
     *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
        ;;
-    *-*-darwin*)
+    *-*-darwin* | *-*-aix*)
        ;;
     *)
        noconfigdirs="$noconfigdirs target-libgomp"
        ;;
     esac
-esac
+fi
 
 
 case "${target}" in
@@ -448,9 +432,6 @@ case "${target}" in
   *-*-vxworks*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
-  m32c-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
     # newlib is not 64 bit ready.  I'm not sure about fileutils.
@@ -590,6 +571,9 @@ case "${target}" in
   hppa*64*-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
+  hppa*-hp-hpux11*)
+    noconfigdirs="$noconfigdirs ld shellutils"
+    ;;
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
@@ -681,6 +665,9 @@ case "${target}" in
   i[[3456789]]86-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
+  i[[3456789]]86-*-rdos*)
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+    ;;
   m32r-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -1041,8 +1028,6 @@ if test "${build}" != "${host}" ; then
   CXX=${CXX-${host_alias}-c++}
   CXXFLAGS=${CXXFLAGS-"-g -O2"}
   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
-  BUILD_PREFIX=${build_alias}-
-  BUILD_PREFIX_1=${build_alias}-
 
 else
   # Set reasonable default values for some tools even if not Canadian.
@@ -1054,9 +1039,6 @@ else
   # This is all going to change when we autoconfiscate...
 
   CC_FOR_BUILD="\$(CC)"
-  BUILD_PREFIX=
-  BUILD_PREFIX_1=loser-
-
   AC_PROG_CC
 
   # We must set the default linker to the linker used by gcc for the correct
@@ -1086,6 +1068,26 @@ fi
 ACX_PROG_GNAT
 ACX_PROG_CMP_IGNORE_INITIAL
 
+# Check for html and install-html
+AC_ARG_WITH(datarootdir,
+[  --with-datarootdir   Use datarootdir as the data root directory.],
+[datarootdir="\${prefix}/${withval}"],
+[datarootdir="\${prefix}/share"])
+
+AC_ARG_WITH(docdir,
+[  --with-docdir        Install documentation in this directory.],
+[docdir="\${prefix}/${withval}"],
+[docdir="\${datarootdir}/doc"])
+
+AC_ARG_WITH(htmldir,
+[  --with-htmldir       Install html in this directory.],
+[htmldir="\${prefix}/${withval}"],
+[htmldir="\${docdir}"])
+
+AC_SUBST(datarootdir)
+AC_SUBST(docdir)
+AC_SUBST(htmldir)
+
 # Check for GMP and MPFR
 gmplibs=
 gmpinc=
@@ -1150,8 +1152,8 @@ if test x"$have_gmp" = xyes; then
 #include <mpfr.h>], [mpfr_t n; mpfr_init(n);],
     [AC_MSG_RESULT([yes])],  [AC_MSG_RESULT([no]); have_gmp=no])
   LIBS="$saved_LIBS"
-  CFLAGS="$saved_CFLAGS"
 fi
+CFLAGS="$saved_CFLAGS"
 
 # Flags needed for both GMP and/or MPFR
 AC_SUBST(gmplibs)
@@ -1323,6 +1325,14 @@ Recognised languages are: ${potential_languages}])
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+  if eval test x\${enable_${dirname}} "=" xno ; then
+    noconfigdirs="$noconfigdirs $dir"
+  fi
+done
+
 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
 # $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
@@ -2126,6 +2136,20 @@ if test "x${use_gnu_ld}" = x &&
   FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
 fi
 
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+  m32c-*-* )
+    if test -d ${srcdir}/libgloss/m32c; then
+      # This is for crt0.o
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+      # This is for r8c.ld
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+      # This is for libnosys.a
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+    fi
+    ;;
+esac
+
 # Makefile fragments.
 for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
 do
@@ -2141,8 +2165,6 @@ AC_SUBST_FILE(ospace_frag)
 
 # Miscellanea: directories, flags, etc.
 AC_SUBST(RPATH_ENVVAR)
-AC_SUBST(BUILD_PREFIX)
-AC_SUBST(BUILD_PREFIX_1)
 AC_SUBST(tooldir)
 AC_SUBST(build_tooldir)
 AC_SUBST(CONFIGURE_GDB_TK)
@@ -2159,7 +2181,7 @@ AC_SUBST(configdirs)
 
 # Target module lists & subconfigure args.
 AC_SUBST(target_configargs)
-AC_SUBST(target_configdirs)
+
 
 # Build tools.
 AC_SUBST(CC_FOR_BUILD)
@@ -2202,10 +2224,10 @@ case " $build_configdirs " in
   *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
   *)
 changequote(,)
-    # For an installed makeinfo, we require it to be from texinfo 4.2 or
+    # For an installed makeinfo, we require it to be from texinfo 4.4 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"