# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="target-libiberty \
+target_libraries="target-libiberty \
target-libgloss \
target-newlib \
target-libstdc++-v3 \
${libgcj} \
target-libobjc"
-# these tools are built using the target libs, and are intended to run only
-# in the target environment
+# these tools are built using the target libraries, and are intended to
+# run only in the target environment
#
-# note: any program that *uses* libraries that are in the "target_libs"
+# note: any program that *uses* libraries that are in the "target_libraries"
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
## ${target_configdirs} is directories we build using the target tools.
#
configdirs=`echo ${host_libs} ${host_tools}`
-target_configdirs=`echo ${target_libs} ${target_tools}`
+target_configdirs=`echo ${target_libraries} ${target_tools}`
# Only make build modules if build != host.
# This should be done more generally, but at the moment it doesn't matter.
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
+ am33_2.0-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
sh-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
d30v-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
fr30-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
;;
h8500-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
# build on HP-UX 10.20.
noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
+ i960-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ ;;
ia64*-*-elf*)
# No gdb support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
+ m32r-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ ;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
+ xtensa-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
- case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
- lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang`
- this_lang_requires=`sed -n -e 's,^lang_requires=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_requires=\([[^ ]]*\).*$,\1,p' $lang`
- for other in $this_lang_requires
- do
+ # From the config-lang.in, get $language, $lang_requires
+ language=
+ lang_requires=
+ . ${lang_frag}
+ for other in ${lang_requires} ; do
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
- *,$lang_alias,*)
- echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
- enable_languages="$enable_languages,$other"
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
;;
esac
done
esac
done
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
- case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
- lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang`
- this_lang_libs=`sed -n -e 's,^target_libs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^target_libs=\([[^ ]]*\).*$,\1,p' $lang`
- this_lang_dirs=`sed -n -e 's,^lang_dirs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_dirs=\([[^ ]]*\).*$,\1,p' $lang`
- build_by_default=`sed -n -e 's,^build_by_default=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^build_by_default=\([[^ ]]*\).*$,\1,p' $lang`
- if test "x$lang_alias" = x
- then
- echo "$lang doesn't set \$language." 1>&2
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ build_by_default=
+ . ${lang_frag}
+ if test "x$language" = x ; then
+ echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
fi
- case ${build_by_default},${enable_languages}, in
- *,$lang_alias,*) add_this_lang=yes ;;
- no,*) add_this_lang=no ;;
- *,all,*) add_this_lang=yes ;;
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Language was explicitly selected; include it.
+ add_this_lang=yes
+ ;;
+ *,all,*)
+ # 'all' was selected; include 'default' languages.
+ case ${build_by_default} in
+ no) add_this_lang=no ;;
+ *) add_this_lang=yes ;;
+ esac
+ ;;
*) add_this_lang=no ;;
esac
- if test x"${add_this_lang}" = xyes; then
- eval target_libs='"$target_libs "'\"$this_lang_libs\"
- else
- eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
- fi
+ case ${add_this_lang} in
+ no)
+ # Remove language-dependent dirs.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
+ esac
;;
esac
done
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
- mips*-*-irix6*o32)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
mips*-*-irix6*)
;;
mips*-*-* | alpha*-*-osf*)
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
-[ --disable-serial-[{host,target,build}-]configure
- Don't force sequential configuration of
+[ --enable-serial-[{host,target,build}-]configure
+ Force sequential configuration of
sub-packages for the host, target or build
- machine, or of any sub-packages at all])
+ machine, or all sub-packages])
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_build_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
olditem=${item}
done
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_host_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
olditem=${item}
done
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_target_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
if test "x${CXX_FOR_TARGET+set}" = xset; then
OSDN Git Service
