libstdcxx_version="target-libstdc++-v3"
# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
target-newlib \
target-librx \
${libstdcxx_version} \
- target-libg++ \
target-libf2c \
target-libchill \
${libgcj}
arm*-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-armpic"
;;
- hppa*-*-*)
+ parisc*-*-* | hppa*-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-papic"
;;
i[3456]86-*-cygwin*)
# per-target:
case "${target}" in
- *-*-chorusos)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
v810*)
target_makefile_frag="${target_makefile_frag} config/mt-v810"
;;
fi
fi
+build_subdir=${build_alias}
+
+if [ x"${build_alias}" != x"${host}" ] ; then
+ if [ ! -d ${build_subdir} ] ; then
+ if mkdir ${build_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${build_subdir}" 1>&2
+ exit 1
+ fi
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
;;
*-*-netbsd*)
noconfigdirs="rcs"
;;
esac
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+ # If we reset it here, it won't get added to noconfigdirs in the
+ # target-specific build rules, so it will be forcibly enabled
+ # (unless the Java language itself isn't enabled).
+ libgcj=
+ ;;
+no)
+ # Make sure we get it printed in the list of not supported target libs.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
case "${target}" in
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ ;;
*-*-netware)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
+ sh-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
+ cris-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ ${libstdcxx_version} target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
;;
d30v-*-*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
fr30-*-elf*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj} target-libf2c"
+ ;;
+ hppa*64*-*-linux* | parisc*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ noconfigdirs="$noconfigdirs target-zlib"
;;
hppa*-*-*elf* | \
- hppa*-*-linux* | \
+ parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*64*-*-*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld shellutils"
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
ia64*-*-elf*)
# No gdb support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
;;
i[3456]86-*-coff | i[3456]86-*-elf)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
*-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# linux has rx in libc
skipdirs="$skipdirs target-librx"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss ${libgcj}"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
+ ;;
m68k-*-elf*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
m68k-*-coff*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-eabi)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-sunos4*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
else
fi
;;
sparc-*-solaris*)
+ case "${host}" in
+ sparc-*-solaris2.8)
+ # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+ # won't build correctly on Solaris 8 if there's a
+ # previously-installed version of GCC in the configured prefix.
+ # This problem does not show up on earlier versions of Solaris.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libg++ ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
;;
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-*)
- noconfigdirs="${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
esac
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
- enable_languages="`echo ${LANGUAGES} | tr ' ' ','`"
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
else
- if test x"${enable_languages}" = x; then
- echo configure.in: --enable-languages needs at least one argument 1>&2
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..)
+ ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in)
+ ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*)
+ ;;
+ *,all,*)
+ ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
+done
+
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
esac
done
-
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
if [ x${shared} = xyes ]; then
case "${target}" in
- hppa*)
+ hppa* | parisc*)
target_makefile_frag="${target_makefile_frag} config/mt-papic"
;;
i[3456]86-*)
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+ if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
esac
fi
-# Record target_configdirs and the configure arguments in Makefile.
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--no[^ ]*//' \
-e 's/--bu[a-z-]*=[^ ]*//' \
-e 's/--ta[a-z-]*=[^ ]*//'`
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${targargs}"
+
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
targargs="--with-newlib ${targargs}"
fi
+# Pass the appropriate --host, --build, and --cache-file arguments.
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
+
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, libstdc++ and libg++ subdirectories.
+# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
+if test "x${GCJ_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ GCJ_FOR_TARGET='gcj'
+else
+ GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
+fi
+
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
elif test -d ${topsrcdir}/gcc; then
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+ CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3) echo xgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
else
*' $(FLAGS_FOR_TARGET)') ;;
*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
-
-targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
-sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
- -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
- -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
- -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
- -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
- -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
- -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
- -e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
- Makefile > Makefile.tem
-rm -f Makefile
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+
+sedtemp=sed.$$
+cat >$sedtemp <<EOF
+s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:
+s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%
+s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%
+s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%
+s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%
+s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = ${GCJ_FOR_TARGET}%
+s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%
+s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%
+s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%
+s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%
+s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%
+s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%
+EOF
+sed -f $sedtemp Makefile > Makefile.tem
+rm -f Makefile $sedtemp
mv -f Makefile.tem Makefile
#
OSDN Git Service
