* pa/elf.h, pa/som.h (ASM_OUTPUT_EXTERNAL): Use assemble_name_raw

[pf3gnuchains/gcc-fork.git] / configure.in

diff --git a/configure.in b/configure.in
index d244a55..538dc4b 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -19,6 +19,8 @@
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
 
 sinclude(config/acx.m4)
+sinclude(config/gcc-version.m4)
+sinclude(config/gxx-include-dir.m4)
 
 AC_INIT(move-if-change)
 AC_PREREQ(2.13)
@@ -98,25 +100,21 @@ fi
 topsrcdir=$srcpwd
 
 extra_host_args=
+
 # Define the trigger file to make sure configure will re-run whenever
 # the gcc version number changes.
-if test "${with_gcc_version_trigger+set}" = set ; then
-  gcc_version_trigger="$with_gcc_version_trigger"
-  gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
+TL_AC_GCC_VERSION([$topsrcdir])
+if test -f $gcc_version_trigger ; then
+  case "$ac_configure_args" in
+    *--with-gcc-version-trigger=$gcc_version_trigger* )
+      ;;
+    * )
+      # Add to all subconfigure arguments: build, host, and target.
+      ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
+      ;;
+  esac
 else
-  # If gcc's sources are available, define the trigger file.
-  if test -f ${topsrcdir}/gcc/version.c ; then
-    gcc_version_trigger=${topsrcdir}/gcc/version.c
-    gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
-    case "$ac_configure_args" in
-      *--with-gcc-version-trigger=$gcc_version_trigger* )
-        ;;
-      * )
-        # Add to all subconfigure arguments: build, host, and target.
-        ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
-        ;;
-    esac
-  fi
+  gcc_version_trigger=
 fi
 
 ### To add a new directory to the tree, first choose whether it is a target
@@ -150,7 +148,7 @@ host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib l
 # know that we are building the simulator.
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
@@ -310,9 +308,6 @@ case "${host}" in
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
     ;;
-  *-*-darwin*)
-    noconfigdirs="$noconfigdirs tk itcl libgui"
-    ;;
 esac
 
 
@@ -322,6 +317,7 @@ ENABLE_LIBADA=$enableval,
 ENABLE_LIBADA=yes)
 if test "${ENABLE_LIBADA}" != "yes" ; then
   noconfigdirs="$noconfigdirs target-libada"
+  noconfigdirs="$noconfigdirs gnattools"
 fi
 
 # Save it here so that, even in case of --enable-libgcj, if the Java
@@ -502,8 +498,13 @@ case "${target}" in
   c54x*-*-* | tic54x-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
-  cris-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+  cris-*-* | crisv32-*-*)
+    case "${target}" in
+      *-*-elf | *-*-aout)
+       noconfigdirs="$noconfigdirs ${libgcj}";;
+      *)
+       noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+    esac
     ;;
   crx-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
@@ -724,7 +725,7 @@ case "${target}" in
   romp-*-*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
     ;;
-  sh-*-*)
+  sh-*-* | sh64-*-*)
     case "${host}" in
       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
@@ -733,9 +734,6 @@ case "${target}" in
     esac
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  sh64-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
   sparc-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -753,6 +751,9 @@ case "${target}" in
            use_gnu_ld=no
     fi
     ;;
+  sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
   v810-*-*)
@@ -1966,22 +1967,7 @@ fi
 target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
 
 # provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
-  yes)
-    AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
-    ;;
-  no | "")
-    case "${enable_version_specific_runtime_libs}" in
-      yes) gxx_include_dir='${libsubdir}/include/c++' ;;
-      *)
-        . ${srcdir}/config.if
-        gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
-    esac ;;
-  *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
+TL_AC_GXX_INCLUDE_DIR
 
 FLAGS_FOR_TARGET=
 case " $target_configdirs " in
@@ -2154,13 +2140,9 @@ AC_SUBST(SET_LIB_PATH)
 AC_SUBST(RPATH_ENVVAR)
 AC_SUBST(BUILD_PREFIX)
 AC_SUBST(BUILD_PREFIX_1)
-AC_SUBST(gcc_version_trigger)
-AC_SUBST(gcc_version)
 AC_SUBST(tooldir)
 AC_SUBST(build_tooldir)
 AC_SUBST(GDB_TK)
-AC_SUBST(gxx_include_dir)
-AC_SUBST(libstdcxx_incdir)
 
 # Build module lists & subconfigure args.
 AC_SUBST(build_configargs)