host_libs="${host_libs} libgui"
fi
-# Set up configure/Makefile variables if libstdc++-v3 is to be built.
-if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
- libstdcxx_version="target-libstdc++-v3"
- # Don't use libstdc++-v3's flags to configure/build itself.
- libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-else
- libstdcxx_version="target-libio target-libstdc++"
- libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio -isystem $$r/$(TARGET_SUBDIR)/libio -L$$r/$(TARGET_SUBDIR)/libstdc++'
-fi
+libstdcxx_version="target-libstdc++-v3"
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
target-newlib \
target-librx \
${libstdcxx_version} \
- target-libg++ \
target-libf2c \
target-libchill \
${libgcj}
# per-target:
case "${target}" in
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
v810*)
target_makefile_frag="${target_makefile_frag} config/mt-v810"
;;
powerpc-*-netware*)
target_makefile_frag="${target_makefile_frag} config/mt-netware"
;;
+ alpha*-*-linux*)
+ target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ ;;
+ alpha*-*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ ;;
*-*-linux*)
target_makefile_frag="${target_makefile_frag} config/mt-linux"
;;
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext libffi"
+ noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile apache inet itcl tix db snavigator gnuserv libffi"
;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
;;
*-*-netbsd*)
noconfigdirs="rcs"
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
alpha*-*-linux*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# linux has rx in libc
skipdirs="$skipdirs target-librx"
;;
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ ${libstdcxx_version} target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="${libgcj}"
;;
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
hppa*-*-*elf* | \
hppa*-*-linux* | \
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ noconfigdirs="$noconfigdirs ld shellutils"
;;
ia64*-*-elf*)
# No gdb support yet.
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
- i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
- # but don't build gdb
- noconfigdirs="$noconfigdirs gdb target-libg++ ${libstdcxx_version} target-librx ${libgcj}"
- ;;
*-*-linux*)
- noconfigdirs="${libgcj}"
# linux has rx in libc
skipdirs="$skipdirs target-librx"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs expect target-libgloss"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
i[3456]86-*-solaris2*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456]86-*-sysv4*)
# The SYSV4 C compiler doesn't handle Emacs correctly
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss ${libgcj}"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
m68k-*-elf*)
noconfigdirs="${libgcj}"
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
sparc-*-elf*)
- noconfigdirs="${libgcj}"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
- noconfigdirs="${libgcj}"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
use_gnu_ld=no
fi
;;
+ sparc-*-solaris*)
+ ;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libg++ ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
;;
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
exit 1
fi
fi
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..)
+ ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in)
+ ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*)
+ ;;
+ *,all,*)
+ ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
+done
+
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
*)
lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
if test "x$lang_alias" = x
then
if test x"${add_this_lang}" = xyes; then
eval target_libs='"$target_libs "'\"$this_lang_libs\"
else
- eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs\"
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
fi
;;
esac
done
-
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, libstdc++ and libg++ subdirectories.
+# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
gxx_include_dir='${libsubdir}/include/g++'
else
. ${topsrcdir}/config.if
- gxx_include_dir='${prefix}/include/g++'-${libstdcxx_interface}
+ gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
fi
else
gxx_include_dir=${gxx_include_dir}
*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
+if test "x${GCJ_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ GCJ_FOR_TARGET='gcj'
+else
+ GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
+fi
+
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
elif test -d ${topsrcdir}/gcc; then
-e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
-e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
-e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
+ -e "s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = ${GCJ_FOR_TARGET}%" \
-e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
OSDN Git Service
