m4_include([ltsugar.m4])
m4_include([ltversion.m4])
m4_include([lt~obsolete.m4])
+m4_include([config/cloog.m4])
AC_INIT(move-if-change)
AC_PREREQ(2.64)
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
+ target-libquadmath \
target-libgfortran \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgo"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
build_configdirs=`echo ${build_libs} ${build_tools}`
m4_divert_text([PARSE_ARGS],
-[ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
+[case $srcdir in
+ *" "*)
+m4_pushdef([AS_MESSAGE_LOG_FD], [])dnl
+ AC_MSG_ERROR([path to source, $srcdir, contains spaces])
+m4_popdef([AS_MESSAGE_LOG_FD])dnl
+ ;;
+esac
+ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
])
################################################################################
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
-# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
-
+# Handle --enable-gold, --enable-ld.
+# --disable-gold [--enable-ld]
+# Build only ld. Default option.
+# --enable-gold [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold", install ld
+# as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold" and "ld",
+# install ld as "ld.bfd".
+# --enable-gold[=default] --disable-ld
+# Build only gold, which is then installed as both "ld.gold" and "ld".
+# --enable-gold --enable-ld=default
+# Build both gold (installed as "ld.gold") and ld (installed as "ld"
+# and ld.bfd).
+# In other words, ld is default
+# --enable-gold=default --enable-ld=default
+# Error.
+
+default_ld=
AC_ARG_ENABLE(gold,
-[[ --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]]],
+[[ --enable-gold[=ARG] build gold [ARG={default,yes,no}]]],
ENABLE_GOLD=$enableval,
ENABLE_GOLD=no)
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
+case "${ENABLE_GOLD}" in
+ yes|default)
# Check for ELF target.
is_elf=no
case "${target}" in
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
- ;;
- esac
+ configdirs="$configdirs gold"
+ if test x${ENABLE_GOLD} = xdefault; then
+ default_ld=gold
+ fi
ENABLE_GOLD=yes
;;
esac
*)
AC_MSG_ERROR([invalid --enable-gold argument])
;;
- esac
+esac
+
+AC_ARG_ENABLE(ld,
+[[ --enable-ld[=ARG] build ld [ARG={default,yes,no}]]],
+ENABLE_LD=$enableval,
+ENABLE_LD=yes)
+
+case "${ENABLE_LD}" in
+ default)
+ if test x${default_ld} != x; then
+ AC_MSG_ERROR([either gold or ld can be the default ld])
+ fi
+ ;;
+ yes)
+ ;;
+ no)
+ if test x${ENABLE_GOLD} != xyes; then
+ AC_MSG_WARN([neither ld nor gold are enabled])
+ fi
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
+ ;;
+ *)
+ AC_MSG_ERROR([invalid --enable-ld argument])
+ ;;
+esac
# Configure extra directories which are host specific
;;
no)
# Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ # Don't disable libffi, though, other languages use it.
+ noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
;;
esac
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-elf) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
v850*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
- powerpc-*-darwin*)
- host_makefile_frag="config/mh-ppc-darwin"
+ *-*-darwin*)
+ host_makefile_frag="config/mh-darwin"
;;
powerpc-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
AC_ARG_WITH(mpc, [ --with-mpc=PATH specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include
plus --with-mpc-lib=PATH/lib])
-AC_ARG_WITH(mpc_include, [ --with-mpc-include=PATH
+AC_ARG_WITH(mpc-include, [ --with-mpc-include=PATH
specify directory for installed MPC include files])
-AC_ARG_WITH(mpc_lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
+AC_ARG_WITH(mpc-lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
if test "x$with_mpc" != x; then
gmplibs="-L$with_mpc/lib $gmplibs"
AC_ARG_WITH(mpfr, [ --with-mpfr=PATH specify prefix directory for installed MPFR package.
Equivalent to --with-mpfr-include=PATH/include
plus --with-mpfr-lib=PATH/lib])
-AC_ARG_WITH(mpfr_include, [ --with-mpfr-include=PATH
+AC_ARG_WITH(mpfr-include, [ --with-mpfr-include=PATH
specify directory for installed MPFR include files])
-AC_ARG_WITH(mpfr_lib, [ --with-mpfr-lib=PATH specify directory for the installed MPFR library])
+AC_ARG_WITH(mpfr-lib, [ --with-mpfr-lib=PATH specify directory for the installed MPFR library])
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
AC_ARG_WITH(gmp, [ --with-gmp=PATH specify prefix directory for the installed GMP package.
Equivalent to --with-gmp-include=PATH/include
plus --with-gmp-lib=PATH/lib])
-AC_ARG_WITH(gmp_include, [ --with-gmp-include=PATH specify directory for installed GMP include files])
-AC_ARG_WITH(gmp_lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library])
+AC_ARG_WITH(gmp-include, [ --with-gmp-include=PATH specify directory for installed GMP include files])
+AC_ARG_WITH(gmp-lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library])
if test "x$with_gmp" != x; then
poststage1_ldflags=$withval
fi],
[poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(poststage1_ldflags)
AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
Equivalent to --with-ppl-include=PATH/include
plus --with-ppl-lib=PATH/lib])
-AC_ARG_WITH(ppl_include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
-AC_ARG_WITH(ppl_lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
+AC_ARG_WITH(ppl-include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
+AC_ARG_WITH(ppl-lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
case $with_ppl in
no)
# Check for CLOOG
-clooglibs=" -lcloog "
-clooginc=" -DCLOOG_PPL_BACKEND "
-
-AC_ARG_WITH(cloog, [ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package
- Equivalent to --with-cloog-include=PATH/include
- plus --with-cloog-lib=PATH/lib])
-AC_ARG_WITH(cloog_include, [ --with-cloog-include=PATH Specify directory for installed CLooG include files])
-AC_ARG_WITH(cloog_lib, [ --with-cloog-lib=PATH Specify the directory for the installed CLooG library])
+dnl Provide configure switches and initialize clooginc & clooglibs
+dnl with user input.
+CLOOG_INIT_FLAGS
if test "x$with_ppl" = "xno"; then
with_cloog=no
fi
-
-case $with_cloog in
- no)
- clooglibs=
- clooginc=
- ;;
- "" | yes)
- ;;
- *)
- clooglibs="-L$with_cloog/lib -lcloog"
- clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
- ;;
-esac
-if test "x$with_cloog_include" != x; then
- clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
-fi
-if test "x$with_cloog_lib" != x; then
- clooglibs="-L$with_cloog_lib -lcloog"
-fi
-if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
- clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' -lcloog '
- clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
- enable_cloog_version_check=no
+if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
+ && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
+ clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
+ clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
fi
-
-AC_ARG_ENABLE(cloog-version-check,
-[ --disable-cloog-version-check disable check for CLooG version],
-ENABLE_CLOOG_CHECK=$enableval,
-ENABLE_CLOOG_CHECK=yes)
-
-if test "x$with_cloog" != "xno" -a "${ENABLE_CLOOG_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
- AC_MSG_CHECKING([for version 0.15.5 (or later revision) of CLooG])
- AC_TRY_COMPILE([#include "cloog/cloog.h"],[
- #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 5
- choke me
- #endif
- ], [AC_TRY_COMPILE([#include "cloog/cloog.h"],[
- #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 9
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
- [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
- CFLAGS="$saved_CFLAGS"
+if test "x$with_cloog" != "xno"; then
+ dnl Version check for CLooG-Org
+ dnl As long as there is no new release of CLooG,
+ dnl we will check for 0.14.0.
+ dnl
+ dnl The first git revision that will work with
+ dnl GCC is: bd91b845a65805c290d43fc1bef8139864a163fb
+ dnl This is enforced implictly, as this is the commit that
+ dnl introduced the versioning information used within our
+ dnl checks.
+ dnl
+ dnl If we're using CLooG-Legacy, the provided version information
+ dnl will be ignored.
+ CLOOG_CHECK_VERSION(0,14,0)
+
+ dnl Only execute fail-action, if CLooG has been
+ dnl requested.
+ CLOOG_IF_FAILED([
+ AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
fi
-# Flags needed for CLOOG
-AC_SUBST(clooglibs)
-AC_SUBST(clooginc)
-
# Check for LTO support.
AC_ARG_ENABLE(lto,
[ --enable-lto enable link time optimization support],
enable_lto=$enableval,
enable_lto=yes; default_enable_lto=yes)
-
-ACX_ELF_TARGET_IFELSE([if test x"$enable_lto" = x"yes" ; then
- # Make sure that libelf.h and gelf.h are available.
- AC_ARG_WITH(libelf, [ --with-libelf=PATH Specify prefix directory for the installed libelf package
- Equivalent to --with-libelf-include=PATH/include
- plus --with-libelf-lib=PATH/lib])
-
- AC_ARG_WITH(libelf_include, [ --with-libelf-include=PATH Specify directory for installed libelf include files])
-
- AC_ARG_WITH(libelf_lib, [ --with-libelf-lib=PATH Specify the directory for the installed libelf library])
-
- saved_CFLAGS="$CFLAGS"
- saved_CPPFLAGS="$CPPFLAGS"
- saved_LIBS="$LIBS"
-
- case $with_libelf in
- "")
- libelflibs="-lelf"
- libelfinc="-I/usr/include/libelf"
- ;;
- *)
- libelflibs="-L$with_libelf/lib -lelf"
- libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf"
- LIBS="$libelflibs $LIBS"
- ;;
- esac
-
- if test "x$with_libelf_include" != x; then
- libelfinc="-I$with_libelf_include"
- fi
-
- if test "x$with_libelf_lib" != x; then
- libelflibs="-L$with_libelf_lib -lelf"
- LIBS="$libelflibs $LIBS"
- fi
-
- if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \
- && test -d ${srcdir}/libelf; then
- libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf '
- libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib'
- LIBS="$libelflibs $LIBS"
-
- else
-
- CFLAGS="$CFLAGS $libelfinc"
- CPPFLAGS="$CPPFLAGS $libelfinc"
- LIBS="$LIBS $libelflibs"
-
- AC_CHECK_HEADERS(libelf.h, [have_libelf_h=yes])
- AC_CHECK_HEADERS(gelf.h, [have_gelf_h=yes])
-
- AC_CHECK_HEADERS(libelf/libelf.h, [have_libelf_libelf_h=yes])
- AC_CHECK_HEADERS(libelf/gelf.h, [have_libelf_gelf_h=yes])
-
- # If we couldn't find libelf.h and the user forced it, emit an error.
- if test x"$have_libelf_h" != x"yes" \
- && test x"$have_libelf_libelf_h" != x"yes" ; then
- if test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([LTO support requires libelf.h or libelf/libelf.h.])
- else
- enable_lto=no
- libelflibs=
- libelfinc=
- fi
- fi
-
- # If we couldn't find gelf.h and the user forced it, emit an error.
- if test x"$have_gelf_h" != x"yes" \
- && test x"$have_libelf_gelf_h" != x"yes" ; then
- if test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([LTO support requires gelf.h or libelf/gelf.h.])
- else
- enable_lto=no
- libelflibs=
- libelfinc=
- fi
- fi
-
- # Check that the detected libelf has the functions we need. We cannot
- # rely on just detecting the headers since they do not include
- # versioning information. Add functions, if needed.
- if test x"$enable_lto" = x"yes" ; then
- AC_MSG_CHECKING([for the correct version of libelf])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_errmsg (0);
- elf_getscn (0, 0);
- elf_nextscn (0, 0);
- elf_strptr (0, 0, 0);
- elf_getident (0, 0);
- elf_begin (0, 0, 0);
- elf_ndxscn (0);
- elf_end (0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
- )
-
- # Check for elf_getshdrstrndx or elf_getshstrndx. The latter's flavor
- # is determined in gcc/configure.ac.
- if test x"$enable_lto" = x"yes" ; then
- AC_MSG_CHECKING([for elf_getshdrstrndx])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_getshdrstrndx (0, 0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]);
- AC_MSG_CHECKING([for elf_getshstrndx])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_getshstrndx (0, 0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
- )]
- )
- fi
-
- # If we couldn't enable LTO and the user forced it, emit an error.
- if test x"$enable_lto" = x"no" \
- && test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([To enable LTO, GCC requires libelf v0.8.12+.
-Try the --with-libelf, --with-libelf-include and --with-libelf-lib options
-to specify its location.])
- fi
- fi
-
- CFLAGS="$saved_CFLAGS"
- CPPFLAGS="$saved_CPPFLAGS"
- LIBS="$saved_LIBS"
-
- fi
-
- # Flags needed for libelf.
- AC_SUBST(libelflibs)
- AC_SUBST(libelfinc)
-fi],[if test x"$default_enable_lto" = x"yes" ; then
+ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
+ build_lto_plugin=yes
+],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin*) ;;
- # On other non-ELF platforms, LTO must be explicitly enabled.
+ *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ # On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
else
# warn during gcc/ subconfigure; unless you're bootstrapping with
# -flto it won't be needed until after installation anyway.
case $target in
- *-cygwin*|*-mingw* | *-apple-darwin*) ;;
+ *-cygwin* | *-mingw* | *-apple-darwin*) ;;
*) if test x"$enable_lto" = x"yes"; then
AC_MSG_ERROR([LTO support is not enabled for this target.])
fi
;;
esac
fi
- default_enable_lto=no])
+ # Among non-ELF, only Windows platforms support the lto-plugin so far.
+ # Build it unless LTO was explicitly disabled.
+ case $target in
+ *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
+ *) ;;
+ esac
+])
# By default, C is the only stage 1 language.
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
- # From the config-lang.in, get $language, $lang_requires
+ # From the config-lang.in, get $language, $lang_requires, and
+ # $lang_requires_boot_languages.
language=
lang_requires=
+ lang_requires_boot_languages=
. ${lang_frag}
- for other in ${lang_requires} ; do
+ for other in ${lang_requires} ${lang_requires_boot_languages}; do
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
;;
esac
done
+ for other in ${lang_requires_boot_languages} ; do
+ if test "$other" != "c"; then
+ case ,${enable_stage1_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *)
+ case ,${enable_languages}, in
+ *,$language,*)
+ echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
+ enable_stage1_languages="$enable_stage1_languages,${other}"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
;;
esac
done
*,lto,*) ;;
*) enable_languages="${enable_languages},lto" ;;
esac
- if test "${ENABLE_GOLD}" = "yes" ; then
+ if test "${build_lto_plugin}" = "yes" ; then
configdirs="$configdirs lto-plugin"
extra_host_libiberty_configure_flags=--enable-shared
fi
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+ enabled_target_libs=
+ disabled_target_libs=
+
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
case $add_this_lang in
unsupported)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
;;
no)
# Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
esac
done
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
AC_ARG_ENABLE(stage1-languages,
[ --enable-stage1-languages@<:@=all@:>@ choose additional languages to build during
stage1. Mostly useful for compiler development.],
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include -isystem $$r/$(HOST_SUBDIR)/gcc/include-fixed'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
AC_SUBST(DLLTOOL_FOR_BUILD)
AC_SUBST(GCJ_FOR_BUILD)
AC_SUBST(GFORTRAN_FOR_BUILD)
+AC_SUBST(GOC_FOR_BUILD)
AC_SUBST(LDFLAGS_FOR_BUILD)
AC_SUBST(LD_FOR_BUILD)
AC_SUBST(NM_FOR_BUILD)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
+NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
- [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
c++)
GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
[gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java)
GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
[gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
+GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
+ [gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
-GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip])
+GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
OSDN Git Service
