# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
##############################################################################
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
AC_INIT(move-if-change)
AC_PREREQ(2.59)
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+# Quote arguments with shell meta charatcers.
+TOPLEVEL_CONFIGURE_ARGUMENTS=
+set -- "$progname" "$@"
+for ac_arg
+do
+ case "$ac_arg" in
+ *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+ # if the argument is of the form -foo=baz, quote the baz part only
+ ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
+ *) ;;
+ esac
+ # Add the quoted argument to the list.
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
+done
+if test "$silent" = yes; then
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
+fi
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
+
# Find the build, host, and target systems.
ACX_NONCANONICAL_BUILD
ACX_NONCANONICAL_HOST
config_shell=${CONFIG_SHELL-/bin/sh}
-progname=$0
-# if PWD already has a value, it is probably wrong.
-if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
-
-# Export original configure arguments for use by sub-configures.
-# Quote arguments with shell meta charatcers.
-TOPLEVEL_CONFIGURE_ARGUMENTS=
-set -- "$progname" "$@"
-for ac_arg
-do
- case "$ac_arg" in
- *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
- # if the argument is of the form -foo=baz, quote the baz part only
- ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
- *) ;;
- esac
- # Add the quoted argument to the list.
- TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
-done
-if test "$silent" = yes; then
- TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
-fi
-# Remove the initial space we just introduced and, as these will be
-# expanded by make, quote '$'.
-TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
-AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
-
moveifchange=${srcdir}/move-if-change
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2*)
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
;;
esac
# Disable libmudflap on some systems.
if test x$enable_libmudflap = x ; then
case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux*)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
# Enable libmudflap by default in GNU and friends.
;;
*-*-freebsd*)
if test x$enable_libgomp = x ; then
# Enable libgomp by default on hosted POSIX systems.
case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
;;
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ powerpc-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
+ i[[3456789]]86-*-darwin* | x86_64-*-darwin[[912]]*)
+ noconfigdirs="$noconfigdirs ld gas gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
;;
arm*-*-linux-gnueabi)
noconfigdirs="$noconfigdirs target-qthreads"
- noconfigdirs="$noconfigdirs target-libobjc"
case ${with_newlib} in
no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ moxie-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
;;
+ ia64*-*-*vms*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ ;;
i370-*-opened*)
;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
- spu-*-*)
- skipdirs="target-libssp"
- ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
;;
- *-hp-hpux*)
+ hppa*-hp-hpux10*)
tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa-hpux10"
;;
- *-*-hiux*)
+ hppa*-hp-hpux* | hppa*-*-hiux*)
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa"
+ ;;
+ hppa*-*)
+ host_makefile_frag="config/mh-pa"
+ ;;
+ *-hp-hpux* | *-*-hiux*)
tentative_cc="cc -Wp,-H256000"
;;
rs6000-*-lynxos*)
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
-# Check for GMP and MPFR
+# Check for GMP, MPFR and MPC
gmplibs="-lmpfr -lgmp"
gmpinc=
have_gmp=no
+mpclibs=-lmpc
+mpcinc=
+have_mpc=no
+
+# Specify a location for mpc
+# check for this first so it ends up on the link line before mpfr.
+AC_ARG_WITH(mpc, [ --with-mpc=PATH specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include
+ plus --with-mpc-lib=PATH/lib])
+AC_ARG_WITH(mpc_include, [ --with-mpc-include=PATH
+ specify directory for installed MPC include files])
+AC_ARG_WITH(mpc_lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
+
+if test "x$with_mpc" != x; then
+ mpclibs="-L$with_mpc/lib -lmpc"
+ mpcinc="-I$with_mpc/include $mpcinc"
+fi
+if test "x$with_mpc_include" != x; then
+ mpcinc="-I$with_mpc_include $mpcinc"
+fi
+if test "x$with_mpc_lib" != x; then
+ mpclibs="-L$with_mpc_lib -lmpc"
+fi
+if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then
+ mpclibs='-L$$r/$(HOST_SUBDIR)/mpc/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/_libs -lmpc'
+ mpcinc='-I$$s/mpc/src '"$mpcinc"
+ # Do not test the mpc version. Assume that it is sufficient, since
+ # it is in the source tree, and the library has not been built yet
+ # but it would be included on the link line in the version check below
+ # hence making the test fail.
+ have_mpc=yes
+fi
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpfr/_libs '"$gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr'
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
+ extra_mpfr_configure_flags='--with-gmp-build=$$r/$(HOST_SUBDIR)/gmp'
+ extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp'
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
# Check GMP actually works
AC_MSG_CHECKING([for correct version of gmp.h])
AC_TRY_COMPILE([#include "gmp.h"],[
- #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
+ #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 2)
choke me
#endif
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
+ # If we have GMP, check the MPFR version.
if test x"$have_gmp" = xyes; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $gmplibs"
- dnl MPFR 2.2.1 is acceptable, but MPFR 2.3.0 is better.
+ dnl MPFR 2.3.1 is acceptable, but MPFR 2.3.2 is better.
AC_MSG_CHECKING([for correct version of mpfr.h])
- AC_TRY_LINK([#include <gmp.h>
+ AC_TRY_COMPILE([#include <gmp.h>
+ #include <mpfr.h>],[
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+ choke me
+ #endif
+ ], AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,2)
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])]),
+ [AC_MSG_RESULT([no]); have_gmp=no])
+ fi
+
+ # Check for the MPC header version.
+ if test x"$have_mpc" != xyes ; then
+ CFLAGS="$CFLAGS $mpcinc"
+ AC_MSG_CHECKING([for the correct version of mpc.h])
+ AC_TRY_COMPILE([#include <mpc.h>],[
+ #if MPC_VERSION < MPC_VERSION_NUM (0,6,0)
choke me
#endif
+ ], [AC_MSG_RESULT([yes]); have_mpc=maybe],
+ [AC_MSG_RESULT([no]); have_mpc=no; mpclibs= ; mpcinc= ])
+ fi
+
+ # Now check the MPFR library.
+ if test x"$have_gmp" = xyes; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ AC_MSG_CHECKING([for the correct version of the gmp/mpfr libraries])
+ AC_TRY_LINK([#include <gmp.h>
+ #include <mpfr.h>],[
mpfr_t n;
mpfr_t x;
int t;
mpfr_atan2 (n, n, x, GMP_RNDN);
mpfr_erfc (n, x, GMP_RNDN);
mpfr_subnormalize (x, t, GMP_RNDN);
- ], [AC_TRY_LINK([#include <gmp.h>
- #include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
- choke me
- #endif
- mpfr_t n; mpfr_init(n);
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
- [AC_MSG_RESULT([no]); have_gmp=no])
- LIBS="$saved_LIBS"
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
+ LIBS="$saved_LIBS"
+ fi
+
+ if test x"$have_mpc" = xmaybe; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $mpclibs $gmplibs"
+ AC_MSG_CHECKING([for the correct version of the mpc library])
+ AC_TRY_LINK([#include <mpc.h>],[
+ mpc_t n;
+ mpc_init2 (n, 53);
+ mpc_set_ui_ui (n, 1, 1, MPC_RNDNN);
+ mpc_sin (n, n, MPC_RNDNN);
+ mpc_cos (n, n, MPC_RNDNN);
+ mpc_tan (n, n, MPC_RNDNN);
+ mpc_sinh (n, n, MPC_RNDNN);
+ mpc_cosh (n, n, MPC_RNDNN);
+ mpc_tanh (n, n, MPC_RNDNN);
+ mpc_exp (n, n, MPC_RNDNN);
+ mpc_log (n, n, MPC_RNDNN);
+ mpc_sqrt (n, n, MPC_RNDNN);
+ mpc_proj (n, n, MPC_RNDNN);
+ mpc_neg (n, n, MPC_RNDNN);
+ mpc_sqr (n, n, MPC_RNDNN);
+ mpc_clear (n);
+ ], [AC_MSG_RESULT([yes]); have_mpc=yes],
+ [AC_MSG_RESULT([no]); have_mpc=no; mpclibs= ; mpcinc= ])
+ LIBS="$saved_LIBS"
fi
+
CFLAGS="$saved_CFLAGS"
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.2+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
fi
fi
-# Flags needed for both GMP and/or MPFR
+if test x$have_mpc != xyes ; then
+ mpcinc=
+ mpclibs=
+fi
+
+gmpinc="$mpcinc $gmpinc"
+gmplibs="$mpclibs $gmplibs"
+
+# Flags needed for both GMP, MPFR and/or MPC.
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
+AC_SUBST(extra_mpfr_configure_flags)
+AC_SUBST(extra_mpc_gmp_configure_flags)
+AC_SUBST(extra_mpc_mpfr_configure_flags)
+
+# Allow host libstdc++ to be specified for static linking with PPL.
+AC_ARG_WITH(host-libstdcxx, [ --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
+ when linking with PPL])
+
+case $with_host_libstdcxx in
+ no|yes)
+ AC_MSG_ERROR([-with-host-libstdcxx needs an argument])
+ ;;
+esac
+
+# Check for PPL
+ppl_major_version=0
+ppl_minor_version=10
+ppllibs=" -lppl_c -lppl -lgmpxx $with_host_libstdcxx "
+pplinc=
+
+AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
+ Equivalent to --with-ppl-include=PATH/include
+ plus --with-ppl-lib=PATH/lib],, with_ppl=no)
+AC_ARG_WITH(ppl_include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
+AC_ARG_WITH(ppl_lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
+
+case $with_ppl in
+ no)
+ ppllibs=
+ ;;
+ *)
+ ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
+ pplinc="-I$with_ppl/include $pplinc"
+ LIBS="$ppllibs $LIBS"
+ ;;
+esac
+if test "x$with_ppl_include" != x; then
+ pplinc="-I$with_ppl_include $pplinc"
+fi
+if test "x$with_ppl_lib" != x; then
+ ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
+ LIBS="$ppllibs $LIBS"
+fi
+if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '"$with_host_libstdcxx "
+ pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
+ LIBS="$ppllibs $LIBS"
+fi
+
+AC_ARG_ENABLE(ppl-version-check,
+[ --disable-ppl-version-check disable check for PPL version],
+ENABLE_PPL_CHECK=$enableval,
+ENABLE_PPL_CHECK=yes)
+
+if test "${ENABLE_PPL_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ AC_MSG_CHECKING([for version $ppl_major_version.$ppl_minor_version of PPL])
+ AC_TRY_COMPILE([#include "ppl_c.h"],[
+ #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ])
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for PPL
+AC_SUBST(ppllibs)
+AC_SUBST(pplinc)
+
+
+# Check for CLOOG
+clooglibs=" -lcloog "
+clooginc=" -DCLOOG_PPL_BACKEND "
+
+AC_ARG_WITH(cloog, [ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package
+ Equivalent to --with-cloog-include=PATH/include
+ plus --with-cloog-lib=PATH/lib],, with_cloog=no)
+AC_ARG_WITH(cloog_include, [ --with-cloog-include=PATH Specify directory for installed CLooG include files])
+AC_ARG_WITH(cloog_lib, [ --with-cloog-lib=PATH Specify the directory for the installed CLooG library])
+
+case $with_cloog in
+ no)
+ clooglibs=
+ clooginc=
+ ;;
+ *)
+ clooglibs="-L$with_cloog/lib -lcloog"
+ clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
+ LIBS="$clooglibs $LIBS"
+ ;;
+esac
+if test "x$with_cloog_include" != x; then
+ clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
+fi
+if test "x$with_cloog_lib" != x; then
+ clooglibs="-L$with_cloog_lib -lcloog"
+ LIBS="$clooglibs $LIBS"
+fi
+if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
+ clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/.libs -L$$r/$(HOST_SUBDIR)/cloog/_libs -lcloog '
+ clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
+ LIBS="$clooglibs $LIBS"
+fi
+
+AC_ARG_ENABLE(cloog-version-check,
+[ --disable-cloog-version-check disable check for CLooG version],
+ENABLE_CLOOG_CHECK=$enableval,
+ENABLE_CLOOG_CHECK=yes)
+
+if test "${ENABLE_CLOOG_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
+ AC_MSG_CHECKING([for correct version of CLooG])
+ AC_TRY_COMPILE([#include "cloog/cloog.h"],[
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for CLOOG
+AC_SUBST(clooglibs)
+AC_SUBST(clooginc)
+
# By default, C is the only stage 1 language.
stage1_languages=,c,
mipsisa*-*-elfoabi*)
target_makefile_frag="config/mt-mips-elfoabi"
;;
+ mips*-*-*linux* | mips*-*-gnu*)
+ target_makefile_frag="config/mt-mips-gnu"
+ ;;
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
*-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
;;
esac
+# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
*-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
+# On systems where the dynamic library environment variable is PATH,
+# gcc/ will put dynamic libraries into a subdirectory to avoid adding
+# built executables to PATH.
+if test "$RPATH_ENVVAR" = PATH; then
+ GCC_SHLIB_SUBDIR=/shlib
+else
+ GCC_SHLIB_SUBDIR=
+fi
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
# Miscellanea: directories, flags, etc.
AC_SUBST(RPATH_ENVVAR)
+AC_SUBST(GCC_SHLIB_SUBDIR)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
AC_SUBST(CONFIGURE_GDB_TK)
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.6 or
+ # For an installed makeinfo, we require it to be from texinfo 4.7 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
:
else
MAKEINFO="$MISSING makeinfo"
OSDN Git Service
